-
Balloon regime: Drop elasticity leads to complete rebound
Authors:
D. Díaz,
A. G. Balasubramanian,
K. Amini,
X. Li,
F. Lundell,
S. Bagheri,
O. Tammisola
Abstract:
When a viscoelastic shear-thinning drop of high elasticity hits a superhydrophobic surface, a growing tail-like filament vertically emerges from the impact spot as the contact line recedes. Notably, the ligament transitions into a balloon-like shape before detaching (Balloon regime) completely from the surface. Here, we attribute the ligament formation to the liquid impalement upon impact into the…
▽ More
When a viscoelastic shear-thinning drop of high elasticity hits a superhydrophobic surface, a growing tail-like filament vertically emerges from the impact spot as the contact line recedes. Notably, the ligament transitions into a balloon-like shape before detaching (Balloon regime) completely from the surface. Here, we attribute the ligament formation to the liquid impalement upon impact into the surface protrusion spacing. Our findings reveal that ligament formation can be controlled by tuning the roughness and surface wettability. We show that ligament stretching mainly depends on inertia and gravity, whereas the high elasticity prevents the ligament break up, enabling complete rebounds.
△ Less
Submitted 14 February, 2025;
originally announced February 2025.
-
Local slip length and surfactant effects on liquid-infused surfaces
Authors:
Sofia Saoncella,
Julien Cerutti,
Théo Lenavetier,
Kasra Amini,
Fredrik Lundell,
Shervin Bagheri
Abstract:
Robust surfaces capable of reducing flow drag, controlling heat and mass transfer, and resisting fouling in fluid flows are important for various applications. In this context, textured surfaces impregnated with a liquid lubricant show promise due to their ability to sustain a liquid-liquid layer that induces slippage. However, theoretical and numerical studies suggest that the slippage can be com…
▽ More
Robust surfaces capable of reducing flow drag, controlling heat and mass transfer, and resisting fouling in fluid flows are important for various applications. In this context, textured surfaces impregnated with a liquid lubricant show promise due to their ability to sustain a liquid-liquid layer that induces slippage. However, theoretical and numerical studies suggest that the slippage can be compromised by surfactants in the overlying fluid, which contaminate the liquid-liquid interface and generate Marangoni stresses. In this study, we use Doppler-optical coherence tomography, an interferometric imaging technique, combined with numerical simulations to investigate how surfactants influence the slip length of lubricant-infused surfaces with longitudinal grooves in a laminar flow. We introduce surfactants by adding tracer particles (milk) to the working fluid (water). Local measurements of slip length at the liquid-liquid interface are significantly smaller than theoretical predictions for clean interfaces (Schönecker & Hardt 2013). In contrast, measurements are in good agreement with numerical simulations of fully immobilized interfaces, indicating that milk particles adsorbed at the interface are responsible for the reduction in slippage. This work provides the first experimental evidence that liquid-liquid interfaces within textured surfaces can become immobilized in the presence of surfactants and flow.
△ Less
Submitted 22 January, 2025;
originally announced January 2025.
-
Optical Coherence Tomography in Soft Matter
Authors:
Kasra Amini,
Cornelius Wittig,
Sofia Saoncella,
Outi Tammisola,
Fredrik Lundell,
Shervin Bagheri
Abstract:
Optical Coherence Tomography (OCT) has become an indispensable tool for investigating mesoscopic features in soft matter and fluid mechanics. Its ability to provide high-resolution, non-invasive measurements in both spatial and temporal domains bridges critical gaps in experimental instrumentation, enabling the study of complex, confined, and dynamic systems. This review serves as both an introduc…
▽ More
Optical Coherence Tomography (OCT) has become an indispensable tool for investigating mesoscopic features in soft matter and fluid mechanics. Its ability to provide high-resolution, non-invasive measurements in both spatial and temporal domains bridges critical gaps in experimental instrumentation, enabling the study of complex, confined, and dynamic systems. This review serves as both an introduction to OCT and a practical guide for researchers seeking to adopt this technology. A set of tutorials, complemented by Python scripts, are provided for both intensity- and Doppler-based techniques. The versatility of OCT is illustrated through case studies, including time-resolved velocimetry, particle-based velocity measurements, slip velocity characterization, detection of shear-induced structures, and analysis of fluid-fluid and fluid-structure interactions. Drawing on our experiences, we also present a set of practical guidelines for avoiding common pitfalls.
△ Less
Submitted 8 January, 2025;
originally announced January 2025.
-
The role of fluid friction in streamer formation and biofilm growth
Authors:
Cornelius Wittig,
Michael Wagner,
Romain Vallon,
Thomas Crouzier,
Wouter van der Wijngaart,
Harald Horn,
Shervin Bagheri
Abstract:
Bacillus subtilis biofilms were grown in laminar channel flow at wall shear stress spanning one order of magnitude ($τ_w = 0.068$ Pa to $τ_w = 0.67$ Pa). We monitor, non-invasively, the evolution of the three-dimensional distribution of biofilm over seven days using optical coherence tomography (OCT). The obtained biofilms consist of many microcolonies where the characteristic colony has a base st…
▽ More
Bacillus subtilis biofilms were grown in laminar channel flow at wall shear stress spanning one order of magnitude ($τ_w = 0.068$ Pa to $τ_w = 0.67$ Pa). We monitor, non-invasively, the evolution of the three-dimensional distribution of biofilm over seven days using optical coherence tomography (OCT). The obtained biofilms consist of many microcolonies where the characteristic colony has a base structure in the form of a leaning pillar and a streamer in the form of a thin filament that originates near the tip of the pillar. While the shape, size and distribution of these microcolonies depend on the imposed shear stress, the same structural features appear consistently for all shear stress values. The formation of streamers seems to occur after the development of a base structure, suggesting that the latter induces a curved secondary flow that triggers the formation of the streamers. Moreover, we observe that the biofilm volume grows approximately linearly over seven days for all the shear stress values, with a growth rate that is inversely proportional to the wall shear stress. We develop a simple model of friction-limited growth, which agrees with the experimental observations. The model provides physical insight into growth mechanisms and can be used to develop accurate continuum models of bacterial biofilm growth.
△ Less
Submitted 11 March, 2024;
originally announced March 2024.
-
Rapid wetting of shear-thinning fluids
Authors:
Susumu Yada,
Kazem Bazesefidpar,
Outi Tammisola,
Gustav Amberg,
Shervin Bagheri
Abstract:
Using experiments and numerical simulations, we investigate the spontaneous spreading of droplets of aqueous glycerol (Newtonian) and aqueous polymer (shear-thinning) solutions on smooth surfaces. We find that in the first millisecond the spreading of the shear-thinning solutions is identical to the spreading of water, regardless of the polymer concentration. In contrast, aqueous glycerol solution…
▽ More
Using experiments and numerical simulations, we investigate the spontaneous spreading of droplets of aqueous glycerol (Newtonian) and aqueous polymer (shear-thinning) solutions on smooth surfaces. We find that in the first millisecond the spreading of the shear-thinning solutions is identical to the spreading of water, regardless of the polymer concentration. In contrast, aqueous glycerol solutions show a different behavior, namely, significantly slower spreading rate than water. In the initial rapid spreading phase, the dominating forces that can resist the wetting are inertial forces and contact-line friction. For the glycerol solutions, an increase in glycerol concentration effectively increases the contact-line friction, resulting in increased resistance to wetting. For the polymeric solutions, however, an increase in polymer concentration does not modify contact-line friction. As a consequence, the energy dissipation at the contact line can not be controlled by varying the amount of additives for shear-thinning fluids. The reduction of the spreading rate of shear-thinning fluids on smooth surfaces in the rapid wetting regime can only be achieved by increasing solvent viscosity. Our results have implications for phase-change applications where the control of the rapid spreading rate is central, such as anti-icing and soldering
△ Less
Submitted 24 August, 2022;
originally announced August 2022.
-
Lift induced by slip inhomogeneities in lubricated contacts
Authors:
Aidan Rinehart,
Uǧis L{ā}cis,
Thomas Salez,
Shervin Bagheri
Abstract:
Lubrication forces depend to a high degree on elasticity, texture, charge, chemistry, and temperature of the interacting surfaces. Therefore, by appropriately designing surface properties, we may tailor lubrication forces to reduce friction, adhesion and wear between sliding surfaces or control repulsion, assembly, and collision of interacting particles. Here, we show that variations of slippage…
▽ More
Lubrication forces depend to a high degree on elasticity, texture, charge, chemistry, and temperature of the interacting surfaces. Therefore, by appropriately designing surface properties, we may tailor lubrication forces to reduce friction, adhesion and wear between sliding surfaces or control repulsion, assembly, and collision of interacting particles. Here, we show that variations of slippage on one of the contacting surfaces induce a lift force. We demonstrate the consequences of this force on the mobility of a cylinder traveling near a wall and show the emergence of particle oscillation and migration that would not otherwise occur in the Stokes flow regime.Our study has implications for understanding how inhomogeneous biological interfaces interact with their environment; it also reveals a new method of patterning surfaces for controlling the motion of nearby particles.
△ Less
Submitted 30 April, 2020; v1 submitted 5 December, 2019;
originally announced December 2019.
-
Droplet leaping governs microstructured surface wetting
Authors:
Susumu Yada,
Shervin Bagheri,
Jonas Hansson,
Minh Do-Quang,
Fredrik Lundell,
Wouter van der Wijngaart,
Gustav Amberg
Abstract:
Microstructured surfaces that control the direction of liquid transport are not only ubiquitous in nature, but they are also central to technological processes such as fog/water harvesting, oil-water separation, and surface lubrication. However, a fundamental understanding of the initial wetting dynamics of liquids spreading on such surfaces is lacking. Here, we show that three regimes govern micr…
▽ More
Microstructured surfaces that control the direction of liquid transport are not only ubiquitous in nature, but they are also central to technological processes such as fog/water harvesting, oil-water separation, and surface lubrication. However, a fundamental understanding of the initial wetting dynamics of liquids spreading on such surfaces is lacking. Here, we show that three regimes govern microstructured surface wetting on short time scales: spread, stick, and contact line leaping. The latter involves establishing a new contact line downstream of the wetting front as the liquid leaps over specific sections of the solid surface. Experimental and numerical investigations reveal how different regimes emerge in different flow directions during wetting of periodic asymmetrically microstructured surfaces. These insights improve our understanding of rapid wetting in droplet impact, splashing, and wetting of vibrating surfaces and may contribute to advances in designing structured surfaces for the mentioned applications.
△ Less
Submitted 16 September, 2019;
originally announced September 2019.
-
Higher order homogenized boundary conditions for flows over rough and porous surfaces
Authors:
Y. Sudhakar,
Ugis Lacis,
Simon Pasche,
Shervin Bagheri
Abstract:
We derive a homogenized macroscopic model for fluid flows over ordered homogeneous porous surfaces. The unconfined free-flow is described by the Navier-Stokes equation, and the Darcy equation governs the seepage flow within the porous domain. Boundary conditions that accurately capture mass and momentum transport at the contact surface between these two domains are derived using the multiscale hom…
▽ More
We derive a homogenized macroscopic model for fluid flows over ordered homogeneous porous surfaces. The unconfined free-flow is described by the Navier-Stokes equation, and the Darcy equation governs the seepage flow within the porous domain. Boundary conditions that accurately capture mass and momentum transport at the contact surface between these two domains are derived using the multiscale homogenization technique. In addition to obtaining the generalized version of the widely used Beavers-Joseph slip condition for tangential velocities, the present work provides an accurate formulation for the transpiration velocity and pressure jump at fluid-porous interfaces; these two conditions are essential for handling two- and three-dimensional flows over porous media. All the constitutive parameters appearing in the interface conditions are computed by solving a set of Stokes problems on a much smaller computational domain, making the formulations free of empirical parameters. The tensorial form of the proposed interface conditions makes it possible to handle flows over isotropic, orthotropic, and anisotropic media. A subset of interface conditions, derived for porous media, can be used to model flows over rough walls. The accuracy of the proposed macroscopic model is numerically quantified for flows over porous and rough walls by comparing the results from our homogenized model with those obtained from geometry-resolved microscopic simulations.
△ Less
Submitted 14 December, 2020; v1 submitted 16 September, 2019;
originally announced September 2019.
