-
Enhanced Thermoelectric Properties By Embedding Fe Nanoparticles Into CrN Films For Energy Harvesting Applications
Authors:
Daria Pankratova,
Khabib Yusupov,
Alberto Vomiero,
Sanath Kumar Honnali,
Robert Boyd,
Sebastian Ekeroth,
Ulf Helmersson,
Clio Azina,
Arnaud le Febvrier
Abstract:
Nanostructured materials and nanocomposites have shown great promise for improving the efficiency of thermoelectric materials. Herein, Fe nanoparticles were imbedded into a CrN matrix by combining two physical vapor deposition approaches, namely high-power impulse magnetron sputtering and a nanoparticle gun. The combination of these techniques allowed the formation of nanocomposites in which the F…
▽ More
Nanostructured materials and nanocomposites have shown great promise for improving the efficiency of thermoelectric materials. Herein, Fe nanoparticles were imbedded into a CrN matrix by combining two physical vapor deposition approaches, namely high-power impulse magnetron sputtering and a nanoparticle gun. The combination of these techniques allowed the formation of nanocomposites in which the Fe nanoparticles remained intact without intermixing with the matrix. The electrical and thermal transport properties of the nanocomposites were investigated and compared to a monolithic CrN film. The measured thermoelectric properties revealed an increase in the Seebeck coefficient, with a decrease of hall carrier concentration and an increase of the electron mobility which could be explained by energy filtering by internal phases created at the NP/matrix interface. The thermal conductivity of the final nanocomposite was reduced from 4.8 W m-1K-1 to a minimum of 3.0 W m-1K-1 W. This study shows prospects for the nanocomposite synthesis process using nanoparticles and its use in improving the thermoelectric properties of coatings.
△ Less
Submitted 8 January, 2024; v1 submitted 15 April, 2023;
originally announced April 2023.
-
On the determination of the thermal shock parameter of MAX phases: A combined experimental-computational study
Authors:
Matej Fekete,
Clio Azina,
Pavel Ondračka,
Lukas Löfler,
Dimitri Bogdanovski,
Daniel Primetzhofer,
Marcus Hans,
Jochen M. Schneider
Abstract:
Thermal shock resistance is one of the performance-defining properties for applications where extreme temperature gradients are required. The thermal shock resistance of a material can be described by means of the thermal shock parameter RT. Here, the thermo-mechanical properties required for the calculation of RT are quantum-mechanically predicted, experimentally determined, and compared for Ti3A…
▽ More
Thermal shock resistance is one of the performance-defining properties for applications where extreme temperature gradients are required. The thermal shock resistance of a material can be described by means of the thermal shock parameter RT. Here, the thermo-mechanical properties required for the calculation of RT are quantum-mechanically predicted, experimentally determined, and compared for Ti3AlC2 and Cr2AlC MAX phases. The coatings are synthesized utilizing direct current magnetron sputtering without additional heating, followed by vacuum annealing. It is shown that the RT of both Ti3AlC2 and Cr2AlC obtained via simulations are in good agreement with the experimentally obtained ones. Comparing the MAX phase coatings, both experiments and simulations indicate superior thermal shock behavior of Ti3AlC2 compared to Cr2AlC, attributed primarily to the larger linear coefficient of thermal expansion of Cr2AlC. The results presented herein underline the potential of ab initio calculations for predicting the thermal shock behavior of ionically-covalently bonded materials.
△ Less
Submitted 15 May, 2023; v1 submitted 17 March, 2023;
originally announced March 2023.
-
Yttrium incorporation in Cr2AlC: On the metastable phase formation and decomposition of (Cr,Y)2AlC MAX phase thin films
Authors:
Clio Azina,
Tim Bartsch,
Damian M. Holzapfel,
Martin Dahlqvist,
Johanna Rosen,
Lukas Löfler,
Alba San Jose Mendez,
Marcus Hans,
Daniel Primetzhofer,
Jochen M. Schneider
Abstract:
Herein we report on the synthesis of a metastable (Cr,Y)2AlC MAX phase solid solution by co-sputtering from a composite Cr-Al-C and elemental Y target, at room temperature, followed by annealing. While direct high-temperature synthesis resulted in multiphase films, as evidenced by X-ray diffraction analyses, room temperature depositions, followed by annealing to 760 °C led to the formation of phas…
▽ More
Herein we report on the synthesis of a metastable (Cr,Y)2AlC MAX phase solid solution by co-sputtering from a composite Cr-Al-C and elemental Y target, at room temperature, followed by annealing. While direct high-temperature synthesis resulted in multiphase films, as evidenced by X-ray diffraction analyses, room temperature depositions, followed by annealing to 760 °C led to the formation of phase pure (Cr,Y)2AlC by diffusion. Higher annealing temperatures caused decomposition of the metastable phase into Cr2AlC, Y5Al3 , and Cr-carbides. In contrast to pure Cr2AlC, the Y-containing phase crystallizes directly in the MAX phase structure instead of first forming a disordered solid solution. Furthermore, the crystallization temperature was shown to be Y-content dependent and was increased by ~200 °C for 5 at.% Y compared to Cr2AlC. Calculations predicting the metastable phase formation of (Cr,Y)2AlC and its decomposition are in excellent agreement with the experimental findings.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
Early stages of dissolution corrosion in 316L and DIN 1.4970 austenitic stainless steels with and without anticorrosion coatings in static liquid lead-bismuth eutectic (LBE) at 500$^\circ$C
Authors:
Evangelia Charalampopoulou,
Konstantina Lambrinou,
Tom Van der Donck,
Boris Paladino,
Fabio Di Fonzo,
Clio Azina,
Per Eklund,
Stanislav Mráz,
Jochen M. Schneider,
Dominique Schryvers,
Rémi Delville
Abstract:
This work addresses the early stages ($\le$1000 h) of the dissolution corrosion behavior of 316L and DIN 1.4970 austenitic stainless steels in contact with oxygen-poor (C$_O$ < 10$^-$$^8$ mass%), static liquid lead-bismuth eutectic (LBE) at 500°C for 600-1000 h. The objective of this study was to determine the relative early-stage resistance of the uncoated steels to dissolution corrosion and to a…
▽ More
This work addresses the early stages ($\le$1000 h) of the dissolution corrosion behavior of 316L and DIN 1.4970 austenitic stainless steels in contact with oxygen-poor (C$_O$ < 10$^-$$^8$ mass%), static liquid lead-bismuth eutectic (LBE) at 500°C for 600-1000 h. The objective of this study was to determine the relative early-stage resistance of the uncoated steels to dissolution corrosion and to assess the protectiveness of select candidate coatings (Cr$_2$AlC, Al$_2$O$_3$, V$_2$Al$_x$C$_y$). The simultaneous exposure of steels with intended differences in microstructure and thermomechanical state showed the effects of steel grain size, density of annealing/deformation twins, and secondary precipitates on the steel dissolution corrosion behavior. The findings of this study provide recommendations on steel manufacturing with the aim of using the steels to construct Gen-IV lead-cooled fast reactors.
△ Less
Submitted 13 July, 2021;
originally announced August 2021.
-
Deposition of MAX phase containing thin films from a (Ti,Zr)2AlC compound target
Authors:
Clio Azina,
Bensu Tunca,
Andrejs Petruhins,
Binbin Xin,
Melike Yildizhan,
Per O. Å. Persson,
Jozef Vleugels,
Konstantina Lambrinou,
Johanna Rosén,
Per Eklund
Abstract:
This work reports on sputter depositions carried out from a compound (Ti,Zr)2AlC target, whereupon Al-containing (Ti,Zr)C thin films (30-40 nm in thickness) were deposited on MgO(111) and Al2O3(0001) substrates at temperatures ranging between 500 and 900 °C. The presence of Al within the carbide structure was evidenced by lattice parameter variations. Furthermore, chemical analyses showed that the…
▽ More
This work reports on sputter depositions carried out from a compound (Ti,Zr)2AlC target, whereupon Al-containing (Ti,Zr)C thin films (30-40 nm in thickness) were deposited on MgO(111) and Al2O3(0001) substrates at temperatures ranging between 500 and 900 °C. The presence of Al within the carbide structure was evidenced by lattice parameter variations. Furthermore, chemical analyses showed that the Al distribution throughout the film thickness was fairly homogeneous. Thicker films (80-90 nm) deposited from the same compound target consisted of the pseudo-binary (Ti,Zr)C and intermetallic compounds in the Ti-Zr-Al system up to 800 °C, as well as solid solution MAX phases with different Ti:Zr ratios at 900 °C. X-ray diffraction and transmission electron microscopy showed that both (Ti,Zr)2AlC and (Ti,Zr)3AlC2 solid solution MAX phases were formed. Moreover, this work discusses the growth mechanism of the thicker films, which started with the formation of the mixed (Ti,Zr)C carbide, followed by the nucleation and growth of aluminides, eventually leading to the formation of the MAX phases, which was the primary objective of the sputter depositions.
△ Less
Submitted 12 August, 2020; v1 submitted 9 September, 2019;
originally announced September 2019.
