-
Ac losses in field-cooled type I superconducting cavities
Authors:
G. Catelani,
K. Li,
C. J. Axline,
T. Brecht,
L. Frunzio,
R. J. Schoelkopf,
L. I. Glazman
Abstract:
As superconductors are cooled below their critical temperature, stray magnetic flux can become trapped in regions that remain normal. The presence of trapped flux facilitates dissipation of ac current in a superconductor, leading to losses in superconducting elements of microwave devices. In type II superconductors, dissipation is well-understood in terms of the dynamics of vortices hosting a sing…
▽ More
As superconductors are cooled below their critical temperature, stray magnetic flux can become trapped in regions that remain normal. The presence of trapped flux facilitates dissipation of ac current in a superconductor, leading to losses in superconducting elements of microwave devices. In type II superconductors, dissipation is well-understood in terms of the dynamics of vortices hosting a single flux quantum. In contrast, the ac response of type I superconductors with trapped flux has not received much attention. Building on Andreev's early work [Sov. Phys. JETP 24, 1019 (1967)], here we show theoretically that the dominant dissipation mechanism is the absorption of the ac field at the exposed surfaces of the normal regions, while the deformation of the superconducting/normal interfaces is unimportant. We use the developed theory to estimate the degradation of the quality factors in field-cooled cavities, and we satisfactorily compare these theoretical estimates to the measured field dependence of the quality factors of two aluminum cavities.
△ Less
Submitted 6 October, 2021;
originally announced October 2021.
-
A CNOT gate between multiphoton qubits encoded in two cavities
Authors:
Serge Rosenblum,
Yvonne Y. Gao,
Philip Reinhold,
Chen Wang,
Christopher J. Axline,
Luigi Frunzio,
Steven M. Girvin,
Liang Jiang,
Mazyar Mirrahimi,
Michel H. Devoret,
Robert J. Schoelkopf
Abstract:
Entangling gates between qubits are a crucial component for performing algorithms in quantum computers. However, any quantum algorithm must ultimately operate on error-protected logical qubits encoded in high-dimensional systems. Typically, logical qubits are encoded in multiple two-level systems, but entangling gates operating on such qubits are highly complex and have not yet been demonstrated.…
▽ More
Entangling gates between qubits are a crucial component for performing algorithms in quantum computers. However, any quantum algorithm must ultimately operate on error-protected logical qubits encoded in high-dimensional systems. Typically, logical qubits are encoded in multiple two-level systems, but entangling gates operating on such qubits are highly complex and have not yet been demonstrated. Here, we realize a controlled NOT (CNOT) gate between two multiphoton qubits in two microwave cavities. In this approach, we encode a qubit in the high-dimensional space of a single cavity mode, rather than in multiple two-level systems. We couple two such encoded qubits together through a transmon, which is driven by an RF pump to apply the gate within 190 ns. This is two orders of magnitude shorter than the decoherence time of the transmon, enabling a high-fidelity gate operation. These results are an important step towards universal algorithms on error-corrected logical qubits.
△ Less
Submitted 19 December, 2017; v1 submitted 15 September, 2017;
originally announced September 2017.
-
Schrodinger's catapult: Launching multiphoton quantum states from a microwave cavity memory
Authors:
Wolfgang Pfaff,
Christopher J Axline,
Luke D Burkhart,
Uri Vool,
Philip Reinhold,
Luigi Frunzio,
Liang Jiang,
Michel H Devoret,
Robert J Schoelkopf
Abstract:
Encoding quantum states in complex multiphoton fields can overcome loss during signal transmission in a quantum network. Transmitting quantum information encoded in this way requires that locally stored states can be converted to propagating fields. Here we experimentally show the controlled conversion of multiphoton quantum states, like "Schrödinger cat" states, from a microwave cavity quantum me…
▽ More
Encoding quantum states in complex multiphoton fields can overcome loss during signal transmission in a quantum network. Transmitting quantum information encoded in this way requires that locally stored states can be converted to propagating fields. Here we experimentally show the controlled conversion of multiphoton quantum states, like "Schrödinger cat" states, from a microwave cavity quantum memory into propagating modes. By parametric conversion using the nonlinearity of a single Josephson junction, we can release the cavity state in ~500 ns, about 3 orders of magnitude faster than its intrinsic lifetime. This `catapult' faithfully converts arbitrary cavity fields to traveling signals with an estimated efficiency of > 90%, enabling on-demand generation of complex itinerant quantum states. Importantly, the release process can be controlled precisely on fast time scales, allowing us to generate entanglement between the cavity and the traveling mode by partial conversion. Our system can serve as the backbone of a microwave quantum network, paving the way towards error-correctable distribution of quantum information and the transfer of highly non-classical states to hybrid quantum systems.
△ Less
Submitted 15 December, 2016;
originally announced December 2016.
-
Micromachined integrated quantum circuit containing a superconducting qubit
Authors:
T. Brecht,
Y. Chu,
C. Axline,
W. Pfaff,
J. Z. Blumoff,
K. Chou,
L. Krayzman,
L. Frunzio,
R. J. Schoelkopf
Abstract:
We present a device demonstrating a lithographically patterned transmon integrated with a micromachined cavity resonator. Our two-cavity, one-qubit device is a multilayer microwave integrated quantum circuit (MMIQC), comprising a basic unit capable of performing circuit-QED (cQED) operations. We describe the qubit-cavity coupling mechanism of a specialized geometry using an electric field picture…
▽ More
We present a device demonstrating a lithographically patterned transmon integrated with a micromachined cavity resonator. Our two-cavity, one-qubit device is a multilayer microwave integrated quantum circuit (MMIQC), comprising a basic unit capable of performing circuit-QED (cQED) operations. We describe the qubit-cavity coupling mechanism of a specialized geometry using an electric field picture and a circuit model, and finally obtain specific system parameters using simulations. Fabrication of the MMIQC includes lithography, etching, and metallic bonding of silicon wafers. Superconducting wafer bonding is a critical capability that is demonstrated by a micromachined storage cavity lifetime $34.3~\mathrm{μs}$, corresponding to a quality factor of 2 million at single-photon energies. The transmon coherence times are $T_1=6.4~\mathrm{μs}$, and $T_2^{Echo}= 11.7~\mathrm{μs}$. We measure qubit-cavity dispersive coupling with rate $χ_{qμ}/2π=-1.17~$MHz, constituting a Jaynes-Cummings system with an interaction strength $g/2π=49~$MHz. With these parameters we are able to demonstrate cQED operations in the strong dispersive regime with ease. Finally, we highlight several improvements and anticipated extensions of the technology to complex MMIQCs.
△ Less
Submitted 7 November, 2016;
originally announced November 2016.
-
Suspending superconducting qubits by silicon micromachining
Authors:
Y. Chu,
C. Axline,
C. Wang,
T. Brecht,
Y. Y. Gao,
L. Frunzio,
R. J. Schoelkopf
Abstract:
We present a method for relieving aluminum 3D transmon qubits from a silicon substrate using micromachining. Our technique is a high yield, one-step deep reactive ion etch that requires no additional fabrication processes, and results in the suspension of the junction area and edges of the aluminum film. The drastic change in the device geometry affects both the dielectric and flux noise environme…
▽ More
We present a method for relieving aluminum 3D transmon qubits from a silicon substrate using micromachining. Our technique is a high yield, one-step deep reactive ion etch that requires no additional fabrication processes, and results in the suspension of the junction area and edges of the aluminum film. The drastic change in the device geometry affects both the dielectric and flux noise environment experienced by the qubit. In particular, the participation ratios of various dielectric interfaces are significantly modified, and suspended qubits exhibited longer $T_1$'s than non-suspended ones. We also find that suspension increases the flux noise experienced by tunable SQUID-based qubits.
△ Less
Submitted 9 June, 2016;
originally announced June 2016.
-
Surface participation and dielectric loss in superconducting qubits
Authors:
Chen Wang,
Christopher Axline,
Yvonne Y. Gao,
Teresa Brecht,
Luigi Frunzio,
Michel H. Devoret,
Robert J. Schoelkopf
Abstract:
We study the energy relaxation times ($T_1$) of superconducting transmon qubits in 3D cavities as a function of dielectric participation ratios of material surfaces. This surface participation ratio, representing the fraction of electric field energy stored in a dissipative surface layer, is computed by a two-step finite-element simulation and experimentally varied by qubit geometry. With a clean…
▽ More
We study the energy relaxation times ($T_1$) of superconducting transmon qubits in 3D cavities as a function of dielectric participation ratios of material surfaces. This surface participation ratio, representing the fraction of electric field energy stored in a dissipative surface layer, is computed by a two-step finite-element simulation and experimentally varied by qubit geometry. With a clean electromagnetic environment and suppressed non-equilibrium quasiparticle density, we find an approximately proportional relation between the transmon relaxation rates and surface participation ratios. These results suggest dielectric dissipation arising from material interfaces is the major limiting factor for the $T_1$ of transmons in 3D cQED architecture. Our analysis also supports the notion of spatial discreteness of surface dielectric dissipation.
△ Less
Submitted 15 October, 2015; v1 submitted 6 September, 2015;
originally announced September 2015.
-
A quantum memory with near-millisecond coherence in circuit QED
Authors:
Matthew Reagor,
Wolfgang Pfaff,
Christopher Axline,
Reinier W. Heeres,
Nissim Ofek,
Katrina Sliwa,
Eric Holland,
Chen Wang,
Jacob Blumoff,
Kevin Chou,
Michael J. Hatridge,
Luigi Frunzio,
Michel H. Devoret,
Liang Jiang,
Robert J. Schoelkopf
Abstract:
Significant advances in coherence have made superconducting quantum circuits a viable platform for fault-tolerant quantum computing. To further extend capabilities, highly coherent quantum systems could act as quantum memories for these circuits. A useful quantum memory must be rapidly addressable by qubits, while maintaining superior coherence. We demonstrate a novel superconducting microwave cav…
▽ More
Significant advances in coherence have made superconducting quantum circuits a viable platform for fault-tolerant quantum computing. To further extend capabilities, highly coherent quantum systems could act as quantum memories for these circuits. A useful quantum memory must be rapidly addressable by qubits, while maintaining superior coherence. We demonstrate a novel superconducting microwave cavity architecture that is highly robust against major sources of loss that are encountered in the engineering of circuit QED systems. The architecture allows for near-millisecond storage of quantum states in a resonator while strong coupling between the resonator and a transmon qubit enables control, encoding, and readout at MHz rates. The observed coherence times constitute an improvement of almost an order of magnitude over those of the best available superconducting qubits. Our design is an ideal platform for studying coherent quantum optics and marks an important step towards hardware-efficient quantum computing with Josephson junction-based quantum circuits.
△ Less
Submitted 25 August, 2015; v1 submitted 24 August, 2015;
originally announced August 2015.
-
High-speed discrimination and sorting of sub-micron particles using a microfluidic device
Authors:
Sukumar Rajauria,
Christopher Axline,
Claudia Gottstein,
Andrew N. Cleland
Abstract:
The size- and fluorescence-based sorting of micro- and nano-scale particles suspended in fluid presents a significant and important challenge for both sample analysis and for manufacturing of nanoparticle-based products. Here we demonstrate a disposable microfluidic particle sorter that enables high-throughput, on-demand counting and binary sorting of sub-micron particles and cells, using either f…
▽ More
The size- and fluorescence-based sorting of micro- and nano-scale particles suspended in fluid presents a significant and important challenge for both sample analysis and for manufacturing of nanoparticle-based products. Here we demonstrate a disposable microfluidic particle sorter that enables high-throughput, on-demand counting and binary sorting of sub-micron particles and cells, using either fluorescence or an electrically-based determination of particle size. Size-based sorting uses a resistive pulse sensor integrated on-chip, while fluorescence-based discrimination is achieved using on-the-fly optical image capture and analysis. Following detection and analysis, the individual particles are deflected using a pair of piezoelectric actuators, directing the particles into one of two desired output channels; the main flow goes into a third waste channel. The integrated system can achieve sorting fidelities of better than 98\%, and the mechanism can successfully count and actuate, on demand, more than 60,000 particles/min.
△ Less
Submitted 4 December, 2014;
originally announced December 2014.
-
Measurement and Control of Quasiparticle Dynamics in a Superconducting Qubit
Authors:
Chen Wang,
Yvonne Y. Gao,
Ioan M. Pop,
Uri Vool,
Chris Axline,
Teresa Brecht,
Reinier W. Heeres,
Luigi Frunzio,
Michel H. Devoret,
Gianluigi Catelani,
Leonid I. Glazman,
Robert J. Schoelkopf
Abstract:
Superconducting circuits have attracted growing interest in recent years as a promising candidate for fault-tolerant quantum information processing. Extensive efforts have always been taken to completely shield these circuits from external magnetic field to protect the integrity of superconductivity. Surprisingly, here we show vortices can improve the performance of superconducting qubits by reduc…
▽ More
Superconducting circuits have attracted growing interest in recent years as a promising candidate for fault-tolerant quantum information processing. Extensive efforts have always been taken to completely shield these circuits from external magnetic field to protect the integrity of superconductivity. Surprisingly, here we show vortices can improve the performance of superconducting qubits by reducing the lifetimes of detrimental single-electron-like excitations known as quasiparticles. Using a contactless injection technique with unprecedented dynamic range, we quantitatively distinguish between recombination and trapping mechanisms in controlling the dynamics of residual quasiparticles, and show quantized changes in quasiparticle trapping rate due to individual vortices. These results highlight the prominent role of quasiparticle trapping in future development of superconducting qubits, and provide a powerful characterization tool along the way.
△ Less
Submitted 24 October, 2014; v1 submitted 27 June, 2014;
originally announced June 2014.
-
Reaching 10 ms single photon lifetimes for superconducting aluminum cavities
Authors:
M. Reagor,
Hanhee Paik,
G. Catelani,
L. Sun,
C. Axline,
E. Holland,
I. M. Pop,
N. A. Masluk,
T. Brecht,
L. Frunzio,
M. H. Devoret,
L. I. Glazman,
R. J. Schoelkopf
Abstract:
Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics (cQED) architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>10^3) higher quality factors and longer lifetimes…
▽ More
Three-dimensional microwave cavities have recently been combined with superconducting qubits in the circuit quantum electrodynamics (cQED) architecture. These cavities should have less sensitivity to dielectric and conductor losses at surfaces and interfaces, which currently limit the performance of planar resonators. We expect that significantly (>10^3) higher quality factors and longer lifetimes should be achievable for 3D structures. Motivated by this principle, we have reached internal quality factors greater than 0.5x10^9 and intrinsic lifetimes of 0.01 seconds for multiple aluminum superconducting cavity resonators at single photon energies and millikelvin temperatures. These improvements could enable long lived quantum memories with submicrosecond access times when strongly coupled to superconducting qubits.
△ Less
Submitted 22 May, 2013; v1 submitted 18 February, 2013;
originally announced February 2013.
