Showing 1–7 of 7 results for author: Anees, P

Crystal structural evolution of Ru$_3$Sn$_7$ under pressure and its implication on possible electronic changes

Authors: K. A. Irshad, P. Anees, Hrudananda Jena, Boby Joseph

Abstract: Ru$_3$Sn$_7$, an intermetallic compound with advanced catalytic properties, exhibits a complex crystal structure and intriguing electronic properties, making it an attractive candidate for investigations under high-pressure (HP). The structural, vibrational and electronic band structure of this compound were investigated at HP up to ~ 20 GPa using synchrotron x-ray powder diffraction, micro-Raman,… ▽ More Ru$_3$Sn$_7$, an intermetallic compound with advanced catalytic properties, exhibits a complex crystal structure and intriguing electronic properties, making it an attractive candidate for investigations under high-pressure (HP). The structural, vibrational and electronic band structure of this compound were investigated at HP up to ~ 20 GPa using synchrotron x-ray powder diffraction, micro-Raman, and density functional theory (DFT), respectively. Despite the local structural changes implied by a discernible reduction in the compressibility and distinct slope changes in the pressure evolution of the symmetric stretching vibrations of the Ru and Sn atoms around 8 GPa, the cubic structure is found to be stable throughout the pressure range. In support, our calculated phonon dispersion relation confirmed the stability of the cubic phase till the highest pressures. A comprehensive analysis of the Raman spectrum reveals the signatures of the pressure induced sudden strengthening of electron-phonon coupling as early as 3 GPa which is backed by a bounce in the phonon and electron density of states (DoS). Electronic structure calculations demonstrate that the metallic nature of Ru$_3$Sn$_7$ is preserved in the studied pressure range with a minor redistribution of electronic DoS across the Fermi level (EF). The band structure calculations predict intriguing changes in the electronic structure, revealing the pressure induced dp hybridization through the high symmetry point of the Brillouin zone which is largely responsible for the observed reduction in the compressibility and enhancement of the electron-phonon coupling in Ru$_3$Sn$_7$. △ Less

Submitted 6 May, 2025; originally announced May 2025.

Strain Engineering of 2D-C3N5 Monolayer and its Application in Overall Water-Splitting: A Hybrid Density Functional Study

Authors: Shakti Singh, P. Anees, Sharat Chandra, Tapan Ghanty

Abstract: The recent experimental synthesis of 2D graphitic C3N5 has attracted lot of interests in its electronic and optical properties and its comparison with other graphitic C3N4 and C3N3. To this end, we performed DFT calculations using more accurate HSE06 functional and estimated the corresponding electronic properties. From a comparative study of the band structures of C3N3, C3N4, and C3N5, we found t… ▽ More The recent experimental synthesis of 2D graphitic C3N5 has attracted lot of interests in its electronic and optical properties and its comparison with other graphitic C3N4 and C3N3. To this end, we performed DFT calculations using more accurate HSE06 functional and estimated the corresponding electronic properties. From a comparative study of the band structures of C3N3, C3N4, and C3N5, we found that, the electronic band-gap decreases as 3.24 eV (C3N3) > 2.81 eV (C3N4) > 2.19 eV (C3N5) with increase in the number of nitrogen atoms in the unit cell of these graphitic carbon nitrides. Further, the strain dependency of the band structure of 2D g-C3N5 under uniaxial and biaxial strain is performed using the same HSE- 06 functional. We found a systematic decrease of band-gap as strain increases. Out of the two types of strain, the biaxial strain has been found to be more efficient in modulating the band-gap. The effect of strain on the structure is also explored by analyzing the bond lengths and bond-angles as well as the charge density plots. Furthermore, we found that at a biaxial strain of 20% strain an interesting structural rearrangement occurs in 2D g-C3N5, which reults in a finite magnetic moment arising from the loss of spin-degeneracy of electronic levels. Finally, by studying the evolution of band-gap, band-alignments and optical absorption as a function of strain we are able to predict that biaxially compressed C3N5 with strain in the range 12-14% can be a promising photocatalyst in overall water-splitting with an excellent optical absorption in the visible light spectrum. △ Less

Submitted 24 December, 2021; originally announced December 2021.

Comments: 27 pages, 25 figures

Anomalous Lattice Thermal Conductivity in Rocksalt IIA-VIA Compounds

Authors: S. C. Rakesh Roshan, N. Yedukondalu, Rajmohan Muthaiah, K. Lavanya, P. Anees, R. Rakesh Kumar, T. Venkatappa Rao, Lars Ehm, John B. Parise

Abstract: Materials with an intrinsic (ultra)low lattice thermal conductivity (k$_L$) are critically important for the development of efficient energy conversion devices. In the present work, we have investigated microscopic origins of low k$_L$ behavior in BaO, BaS and MgTe by exploring lattice dynamics and phonon transport of 16 iso-structural MX (Mg, Ca, Sr, Ba and X = O, S, Se and Te) compounds in the r… ▽ More Materials with an intrinsic (ultra)low lattice thermal conductivity (k$_L$) are critically important for the development of efficient energy conversion devices. In the present work, we have investigated microscopic origins of low k$_L$ behavior in BaO, BaS and MgTe by exploring lattice dynamics and phonon transport of 16 iso-structural MX (Mg, Ca, Sr, Ba and X = O, S, Se and Te) compounds in the rocksalt (NaCl)-type structure by comparing their lattice transport properties with the champion thermoeletric iso-structural material, PbTe. Anomalous trends are observed for k$_L$ in MX compounds except the MgX series in contrast to the expected trend from their atomic mass. The underlying mechanisms for such low k$_L$ behavior in relatively low atomic mass systems namely BaO, BaS and MgTe compounds are thoroughly analyzed. We propose the following dominant factors that might be responsible for low k$_L$ behavior in these materials: 1) softening of transverse acoustic (TA) phonon modes despite low atomic mass, 2) low lying optic (LLO) phonon modes fall deep into acoustic mode region which enhances overlap between longitudinal acoustic (LA) and LLO phonon modes which increases scattering phase space, 3) short phonon lifetimes and high scattering rates, 4) relatively high density (\r{ho}) and large Grüneisen parameter. Moreover, tensile strain also causes a further reduction in k$_L$ for BaO, BaS and MgTe through phonon softening and near ferroelectric instability. Our comprehensive study on 16 binary MX compounds might provide a pathway for designing (ultra)low k$_L$ materials even with simple crystal systems through phonon engineering. △ Less

Submitted 26 October, 2021; originally announced October 2021.

Comments: 40 pages, 10 figures

Enhanced adsorption of Xe and Kr on boron doped graphene sheet decorated with transition metals (Fe, Ni, Cu and Zn)

Authors: P. Anees

Abstract: Efficient adsorption and segregation of Xe & Kr gases is of high importance in commercial as well as nuclear industries. Systematic ab initio calculations reveal that transition metal (TM) decorated boron doped graphene (BDG-TM) sheet can act as an efficient substrate for adsorptive capture of Xe & Kr (adatoms). Substantial enhancement in the adsorption energy (E_ads) is obtained on BDG-TM substra… ▽ More Efficient adsorption and segregation of Xe & Kr gases is of high importance in commercial as well as nuclear industries. Systematic ab initio calculations reveal that transition metal (TM) decorated boron doped graphene (BDG-TM) sheet can act as an efficient substrate for adsorptive capture of Xe & Kr (adatoms). Substantial enhancement in the adsorption energy (E_ads) is obtained on BDG-TM substrates and it varies as BDG-Cu > BDG-Ni > BDG-Fe > BDG-Zn. The improvement is approximately four times of the pristine BDG and twice that of the conventional metallic substrates. Badar charge analysis and charge density difference maps envisage that, the TM decoration alters the charge distribution at substrate-adatom interface, which in turn brings a considerable change in the polarization of adatom, leads to significant improvement in the E_ads. The change in polarization of adatoms is interlinked with charge transfer process and it has been gauged by computing their effective charges upon adsorption; which follows the same sequence of E_ads and hence corroborated each other. Later, the partial density of states analysis shows a splitting and strong hybridization of Xe-p with TM-d orbitals near the Fermi level of Fe, Ni and Cu decorated systems, unveils a strong adsorption. Further, the effect of clustering and dispersion of Cu atoms on E_ads are analyzed using a first principle based genetic algorithm, which reveals that clustering of Cu atoms deteriorate the E_ads of Xe & Kr. Thus for experimental realization, BDG sheet with uniformly dispersed fine Cu particles is proposed as a substrate. △ Less

Submitted 23 April, 2021; v1 submitted 9 November, 2020; originally announced November 2020.

Journal ref: Adv. Theory Simul. 2021, 2100187

Thermodynamic stability and vibrational anharmonicity of black phosphorene-beyond quasi-harmonic analysis

Authors: P. Anees

Abstract: Thermodynamic stability and vibrational anharmonicity of single layer black phosphorene (SLBP) are studied using a spectral energy density (SED) method. Thermal stability of SLBP sheet is analyzed by computing phonon dispersion at 300 K, which shows that SLBP sheet is dynamically stable at finite temperature and survives the crumpling transition. Temperature evolution of all zone center optic phon… ▽ More Thermodynamic stability and vibrational anharmonicity of single layer black phosphorene (SLBP) are studied using a spectral energy density (SED) method. Thermal stability of SLBP sheet is analyzed by computing phonon dispersion at 300 K, which shows that SLBP sheet is dynamically stable at finite temperature and survives the crumpling transition. Temperature evolution of all zone center optic phonon modes are extracted, including experimentally forbidden IR and Raman active modes. Mode resolved phonon frequencies of optic modes shows significant deviation from quasi-harmonic prediction, which is ascribed to the effects of inclusion of higher order phonon-phonon scattering processes. Further, temperature sensitivity of each mode is analyzed by computing their first order temperature co-efficient (\c{hi}). The quasi-harmonic \c{hi} values are one order magnitude smaller than the SED and experimental values; which again substantiate that quasi-harmonic methods are inadequate, and a full anaharmonic analysis is essential to explain structure and dynamics of SLBP at finite temperatures. △ Less

Submitted 2 January, 2020; v1 submitted 19 December, 2019; originally announced December 2019.

Delineating the role of ripples on thermal expansion of honeycomb materials:graphene, 2D-h-BN and monolayer(ML)-MoS2

Authors: P. Anees, M. C. Valsakumar, B. K. Panigrahi

Abstract: We delineated the role of thermally excited ripples on thermal expansion properties of 2D honeycomb materials (free-standing graphene, 2D h-BN, and ML-MoS2), by explicitly carrying out three-dimensional (3D) and two-dimensional (2D) molecular dynamics simulations. In 3D simulations, the in-plane lattice parameter (a-lattice) of graphene and 2D h-BN shows thermal contraction over a wide range of te… ▽ More We delineated the role of thermally excited ripples on thermal expansion properties of 2D honeycomb materials (free-standing graphene, 2D h-BN, and ML-MoS2), by explicitly carrying out three-dimensional (3D) and two-dimensional (2D) molecular dynamics simulations. In 3D simulations, the in-plane lattice parameter (a-lattice) of graphene and 2D h-BN shows thermal contraction over a wide range of temperatures and exhibits a strong system size dependence. The 2D simulations of the very same system show a reverse trend, where the a-lattice is expanding in the whole computed temperature range. Contrary to graphene and 2D h-BN, the a-lattice of ML-MoS2 shows thermal expansion in both 2D and 3D simulations and their system size dependence is marginal. By analyzing the phonon dispersion at 300 K, we found that the discrepancy between 2D and 3D simulations of graphene and 2D h-BN is due to the absence of out-of-plane bending mode (ZA) in 2D simulations, which is responsible for thermal contraction of a-lattice at low temperature. Meanwhile, all the phonon modes are present in 2D phonon dispersion of ML-MoS2, which indicates that the origin of ZA mode is not purely due to out-of-plane movement of atoms and also its effect on thermal expansion is not significant as found in graphene and 2D h-BN △ Less

Submitted 25 October, 2016; originally announced October 2016.

Journal ref: Phys. Chem. Chem. Phys., 19, 10518, (2017)

Phase stability and lattice dynamics of ammonium azide under hydrostatic compression

Authors: N. Yedukondalu, G. Vaitheeswaran, P. Anees, M. C. Valsakumar

Abstract: We have investigated the effect of hydrostatic pressure and temperature on phase stability of hydro-nitrogen solids using dispersion corrected Density Functional Theory calculations. From our total energy calculations, Ammonium Azide (AA) is found to be the thermodynamic ground state of N$_4$H$_4$ compounds in preference to Trans-Tetrazene (TTZ), Hydro-Nitrogen Solid-1 (HNS-1) and HNS-2 phases. We… ▽ More We have investigated the effect of hydrostatic pressure and temperature on phase stability of hydro-nitrogen solids using dispersion corrected Density Functional Theory calculations. From our total energy calculations, Ammonium Azide (AA) is found to be the thermodynamic ground state of N$_4$H$_4$ compounds in preference to Trans-Tetrazene (TTZ), Hydro-Nitrogen Solid-1 (HNS-1) and HNS-2 phases. We have carried out a detailed study on structure and lattice dynamics of the equilibrium phase (AA). AA undergoes a phase transition to TTZ at around $\sim$ 39-43 GPa followed by TTZ to HNS-1 at around 80-90 GPa under the studied temperature range of 0-650 K. The accelerated and decelerated compression of $a$ and $c$ lattice constants suggest that the ambient phase of AA transforms to a tetragonal phase and then to a low symmetry structure with less anisotropy up on further compression. We have noticed that the angle made by Type-II azides with $c$-axis shows a rapid decrease and reaches a minimum value at 12 GPa, and thereafter increases up to 50 GPa. Softening of the shear elastic moduli is suggestive of a mechanical instability of AA under high pressure. In addition, we have also performed density functional perturbation theory calculations to obtain the vibrational spectrum of AA at ambient as well as at high pressures. Further, we have made a complete assignment of all the vibrational modes which is in good agreement with the experimental observations at ambient pressure. Also the calculated pressure dependent IR spectra show that the N-H stretching frequencies undergo a red and blue-shift corresponding to strengthening and weakening of hydrogen bonding, respectively below and above 4 GPa. △ Less

Submitted 23 November, 2015; originally announced November 2015.

Journal ref: Physical Chemistry Chemical Physics, 17, 29210-29225, (2015)