-
Data needs and challenges for quantum dot devices automation
Authors:
Justyna P. Zwolak,
Jacob M. Taylor,
Reed W. Andrews,
Jared Benson,
Garnett W. Bryant,
Donovan Buterakos,
Anasua Chatterjee,
Sankar Das Sarma,
Mark A. Eriksson,
Eliška Greplová,
Michael J. Gullans,
Fabian Hader,
Tyler J. Kovach,
Pranav S. Mundada,
Mick Ramsey,
Torbjørn Rasmussen,
Brandon Severin,
Anthony Sigillito,
Brennan Undseth,
Brian Weber
Abstract:
Gate-defined quantum dots are a promising candidate system for realizing scalable, coupled qubit systems and serving as a fundamental building block for quantum computers. However, present-day quantum dot devices suffer from imperfections that must be accounted for, which hinders the characterization, tuning, and operation process. Moreover, with an increasing number of quantum dot qubits, the rel…
▽ More
Gate-defined quantum dots are a promising candidate system for realizing scalable, coupled qubit systems and serving as a fundamental building block for quantum computers. However, present-day quantum dot devices suffer from imperfections that must be accounted for, which hinders the characterization, tuning, and operation process. Moreover, with an increasing number of quantum dot qubits, the relevant parameter space grows sufficiently to make heuristic control infeasible. Thus, it is imperative that reliable and scalable autonomous tuning approaches are developed. This meeting report outlines current challenges in automating quantum dot device tuning and operation with a particular focus on datasets, benchmarking, and standardization. We also present insights and ideas put forward by the quantum dot community on how to overcome them. We aim to provide guidance and inspiration to researchers invested in automation efforts.
△ Less
Submitted 5 November, 2024; v1 submitted 21 December, 2023;
originally announced December 2023.
-
Universal logic with encoded spin qubits in silicon
Authors:
Aaron J. Weinstein,
Matthew D. Reed,
Aaron M. Jones,
Reed W. Andrews,
David Barnes,
Jacob Z. Blumoff,
Larken E. Euliss,
Kevin Eng,
Bryan Fong,
Sieu D. Ha,
Daniel R. Hulbert,
Clayton Jackson,
Michael Jura,
Tyler E. Keating,
Joseph Kerckhoff,
Andrey A. Kiselev,
Justine Matten,
Golam Sabbir,
Aaron Smith,
Jeffrey Wright,
Matthew T. Rakher,
Thaddeus D. Ladd,
Matthew G. Borselli
Abstract:
Qubits encoded in a decoherence-free subsystem and realized in exchange-coupled silicon quantum dots are promising candidates for fault-tolerant quantum computing. Benefits of this approach include excellent coherence, low control crosstalk, and configurable insensitivity to certain error sources. Key difficulties are that encoded entangling gates require a large number of control pulses and high-…
▽ More
Qubits encoded in a decoherence-free subsystem and realized in exchange-coupled silicon quantum dots are promising candidates for fault-tolerant quantum computing. Benefits of this approach include excellent coherence, low control crosstalk, and configurable insensitivity to certain error sources. Key difficulties are that encoded entangling gates require a large number of control pulses and high-yielding quantum dot arrays. Here we show a device made using the single-layer etch-defined gate electrode architecture that achieves both the required functional yield needed for full control and the coherence necessary for thousands of calibrated exchange pulses to be applied. We measure an average two-qubit Clifford fidelity of $97.1 \pm 0.2\%$ with randomized benchmarking. We also use interleaved randomized benchmarking to demonstrate the controlled-NOT gate with $96.3 \pm 0.7\%$ fidelity, SWAP with $99.3 \pm 0.5\%$ fidelity, and a specialized entangling gate that limits spreading of leakage with $93.8 \pm 0.7\%$ fidelity.
△ Less
Submitted 7 February, 2022;
originally announced February 2022.
-
Quantifying error and leakage in an encoded Si/SiGe triple-dot qubit
Authors:
R. W. Andrews,
C. Jones,
M. D. Reed,
A. M. Jones,
S. D. Ha,
M. P. Jura,
J. Kerckhoff,
M. Levendorf,
S. Meenehan,
S. T. Merkel,
A. Smith,
B. Sun,
A. J. Weinstein,
M. T. Rakher,
T. D. Ladd,
M. G. Borselli
Abstract:
Quantum computation requires qubits that satisfy often-conflicting criteria, including scalable control and long-lasting coherence. One approach to creating a suitable qubit is to operate in an encoded subspace of several physical qubits. Though such encoded qubits may be particularly susceptible to leakage out of their computational subspace, they can be insensitive to certain noise processes and…
▽ More
Quantum computation requires qubits that satisfy often-conflicting criteria, including scalable control and long-lasting coherence. One approach to creating a suitable qubit is to operate in an encoded subspace of several physical qubits. Though such encoded qubits may be particularly susceptible to leakage out of their computational subspace, they can be insensitive to certain noise processes and can also allow logical control with a single type of entangling interaction while maintaining favorable features of the underlying physical system. Here we demonstrate a qubit encoded in a subsystem of three coupled electron spins confined in gated, isotopically enhanced silicon quantum dots. Using a modified "blind" randomized benchmarking protocol that determines both computational and leakage errors, we show that unitary operations have an average total error of 0.35%, with 0.17% of that coming from leakage driven by interactions with substrate nuclear spins. This demonstration utilizes only the voltage-controlled exchange interaction for qubit manipulation and highlights the operational benefits of encoded subsystems, heralding the realization of high-quality encoded multi-qubit operations.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
-
Spin-Blockade Spectroscopy of Si/SiGe Quantum Dots
Authors:
A. M. Jones,
E. J. Pritchett,
E. H. Chen,
T. E. Keating,
R. W. Andrews,
J. Z. Blumoff,
L. A. De Lorenzo,
K. Eng,
S. D. Ha,
A. A. Kiselev,
S. M. Meenehan,
S. T. Merkel,
J. A. Wright,
L. F. Edge,
R. S. Ross,
M. T. Rakher,
M. G. Borselli,
A. Hunter
Abstract:
We implement a technique for measuring the singlet-triplet energy splitting responsible for spin-to-charge conversion in semiconductor quantum dots. This method, which requires fast, single-shot charge measurement, reliably extracts an energy in the limits of both large and small splittings. We perform this technique on an undoped, accumulation-mode Si/SiGe triple-quantum dot and find that the mea…
▽ More
We implement a technique for measuring the singlet-triplet energy splitting responsible for spin-to-charge conversion in semiconductor quantum dots. This method, which requires fast, single-shot charge measurement, reliably extracts an energy in the limits of both large and small splittings. We perform this technique on an undoped, accumulation-mode Si/SiGe triple-quantum dot and find that the measured splitting varies smoothly as a function of confinement gate biases. Not only does this demonstration prove the value of having an $in~situ$ excited-state measurement technique as part of a standard tune-up procedure, it also suggests that in typical Si/SiGe quantum dot devices, spin-blockade can be limited by lateral orbital excitation energy rather than valley splitting.
△ Less
Submitted 21 September, 2018;
originally announced September 2018.
-
Reduced sensitivity to charge noise in semiconductor spin qubits via symmetric operation
Authors:
M. D. Reed,
B. M. Maune,
R. W. Andrews,
M. G. Borselli,
K. Eng,
M. P. Jura,
A. A. Kiselev,
T. D. Ladd,
S. T. Merkel,
I. Milosavljevic,
E. J. Pritchett,
M. T. Rakher,
R. S. Ross,
A. E. Schmitz,
A. Smith,
J. A. Wright,
M. F. Gyure,
A. T. Hunter
Abstract:
We demonstrate improved operation of exchange-coupled semiconductor quantum dots by substantially reducing the sensitivity of exchange operations to charge noise. The method involves biasing a double-dot symmetrically between the charge-state anti-crossings, where the derivative of the exchange energy with respect to gate voltages is minimized. Exchange remains highly tunable by adjusting the tunn…
▽ More
We demonstrate improved operation of exchange-coupled semiconductor quantum dots by substantially reducing the sensitivity of exchange operations to charge noise. The method involves biasing a double-dot symmetrically between the charge-state anti-crossings, where the derivative of the exchange energy with respect to gate voltages is minimized. Exchange remains highly tunable by adjusting the tunnel coupling. We find that this method reduces the dephasing effect of charge noise by more than a factor of five in comparison to operation near a charge-state anti-crossing, increasing the number of observable exchange oscillations in our qubit by a similar factor. Performance also improves with exchange rate, favoring fast quantum operations.
△ Less
Submitted 21 March, 2016; v1 submitted 5 August, 2015;
originally announced August 2015.
-
Bidirectional and efficient conversion between microwave and optical light
Authors:
R. W. Andrews,
R. W. Peterson,
T. P. Purdy,
K. Cicak,
R. W. Simmonds,
C. A. Regal,
K. W. Lehnert
Abstract:
Converting low-frequency electrical signals into much higher frequency optical signals has enabled modern communications networks to leverage both the strengths of microfabricated electrical circuits and optical fiber transmission, allowing information networks to grow in size and complexity. A microwave-to-optical converter in a quantum information network could provide similar gains by linking q…
▽ More
Converting low-frequency electrical signals into much higher frequency optical signals has enabled modern communications networks to leverage both the strengths of microfabricated electrical circuits and optical fiber transmission, allowing information networks to grow in size and complexity. A microwave-to-optical converter in a quantum information network could provide similar gains by linking quantum processors via low-loss optical fibers and enabling a large-scale quantum network. However, no current technology can convert low-frequency microwave signals into high-frequency optical signals while preserving their fragile quantum state. For this demanding application, a converter must provide a near-unitary transformation between different frequencies; that is, the ideal transformation is reversible, coherent, and lossless. Here we demonstrate a converter that reversibly, coherently, and efficiently links the microwave and optical portions of the electromagnetic spectrum. We use our converter to transfer classical signals between microwave and optical light with conversion efficiencies of ~10%, and achieve performance sufficient to transfer quantum states if the device were further precooled from its current 4 kelvin operating temperature to below 40 millikelvin. The converter uses a mechanically compliant membrane to interface optical light with superconducting microwave circuitry, and this unique combination of technologies may provide a way to link distant nodes of a quantum information network.
△ Less
Submitted 11 August, 2014; v1 submitted 19 October, 2013;
originally announced October 2013.
-
Tunable coupling to a mechanical oscillator circuit using a coherent feedback network
Authors:
Joseph Kerckhoff,
Reed W. Andrews,
H. S. Ku,
William F. Kindel,
Katarina Cicak,
Raymond W. Simmonds,
K. W. Lehnert
Abstract:
We demonstrate a fully cryogenic microwave feedback network composed of modular superconducting devices connected by transmission lines and designed to control a mechanical oscillator coupled to one of the devices. The network features an electromechanical device and a tunable controller that coherently receives, processes and feeds back continuous microwave signals that modify the dynamics and re…
▽ More
We demonstrate a fully cryogenic microwave feedback network composed of modular superconducting devices connected by transmission lines and designed to control a mechanical oscillator coupled to one of the devices. The network features an electromechanical device and a tunable controller that coherently receives, processes and feeds back continuous microwave signals that modify the dynamics and readout of the mechanical state. While previous electromechanical systems represent some compromise between efficient control and efficient readout of the mechanical state, as set by the electromagnetic decay rate, the tunable controller produces a closed-loop network that can be dynamically and continuously tuned between both extremes much faster than the mechanical response time. We demonstrate that the microwave decay rate may be modulated by at least a factor of 10 at a rate greater than $10^4$ times the mechanical response rate. The system is easy to build and suggests that some useful functions may arise most naturally at the network-level of modular, quantum electromagnetic devices.
△ Less
Submitted 7 June, 2013; v1 submitted 8 November, 2012;
originally announced November 2012.
