-
Tracking solid oxide cell electrode microstructural evolution during annealing by scanning 3D X-ray diffraction microscopy
Authors:
A. Shukla,
S. De Angelis,
J. Wright,
Y. Zhang,
J. Oddershede,
H. F. Poulsen,
J. W. Andreasen
Abstract:
Ni particle coarsening is a primary degradation mechanism in Ni/YSZ solid oxide cells, limiting the lifespan of these devices. In this study, we demonstrate the use of Scanning 3D X-ray diffraction (S3DXRD) with an unprecedented spatial resolution of 100 nm, to monitor the microstructural evolution within the 3D volume of a solid oxide cell subjected to ex situ heat treatment. Unlike conventional…
▽ More
Ni particle coarsening is a primary degradation mechanism in Ni/YSZ solid oxide cells, limiting the lifespan of these devices. In this study, we demonstrate the use of Scanning 3D X-ray diffraction (S3DXRD) with an unprecedented spatial resolution of 100 nm, to monitor the microstructural evolution within the 3D volume of a solid oxide cell subjected to ex situ heat treatment. Unlike conventional tomography, S3DXRD combines crystallographic information with spatial maps, enabling precise identification of grain boundaries and the determination of local curvature changes in the Ni microstructure. Our study reveals that the Ni phase undergoes significant structural changes during annealing, driven by grain growth. This transformation is characterized by a reduction in local curvature, particularly in regions where grains disappear. We observe that the disappearing grains are the smallest grains in the size distribution and are often located near pores. As a result, the most notable reduction in local curvature occurs at the Ni-pore interface. The quantitative characterization of polycrystalline microstructural evolution in Ni/YSZ system provides new insights into the mechanisms of Ni particle coarsening in SOC devices, potentially guiding strategies to enhance the long-term stability of SOC devices.
△ Less
Submitted 14 October, 2024;
originally announced October 2024.
-
Grain boundary strain localization in CdTe solar cell revealed by Scanning 3D X-ray diffraction microscopy
Authors:
A. Shukla,
J. Wright,
A. Henningsson,
H. Stieglitz,
E. Colegrove,
L. Besley,
C. Baur,
S De Angelis,
M. Stuckelberger,
H. F. Poulsen,
J. W. Andreasen
Abstract:
Cadmium Telluride (CdTe) solar cell technology is a promising candidate to help boost green energy production. However, impurities and structural defects are major barriers to improving the solar power conversion efficiency. Grain boundaries often act as aggregation sites for impurities, resulting in strain localization in areas of high diffusion. In this study, we demonstrate the use of scanning…
▽ More
Cadmium Telluride (CdTe) solar cell technology is a promising candidate to help boost green energy production. However, impurities and structural defects are major barriers to improving the solar power conversion efficiency. Grain boundaries often act as aggregation sites for impurities, resulting in strain localization in areas of high diffusion. In this study, we demonstrate the use of scanning 3D X-ray diffraction microscopy to non-destructively make 3D maps of the grains, their phase, orientation, and local strain within a CdTe solar cell absorber layer with a resolution of 100 nm. We quantify twin boundaries and suggest how they affect grain size and orientation distribution. Local strain analysis reveals that strain is primarily associated with high misorientation grain boundaries, whereas twin boundaries do not show high strain values. We also observe that high-strain grain boundaries form a continuous pathway connected to the CdS layer. Hence, this high-strain region is believed to be associated with the diffusion of sulfur from the CdS layer along grain boundaries. This hypothesis is supported by SEM EDS and X-ray fluorescence experiments. The method and analysis demonstrated in this work can be applied to different polycrystalline materials where the characterization of grain boundary properties is essential to understand the microstructural phenomena.
△ Less
Submitted 11 February, 2024;
originally announced February 2024.
-
Manipulating organic semiconductor morphology with visible light
Authors:
Michael Korning Sorensen,
Anders Skovbo Gertsen,
Rocco Peter Fornari,
Binbin Zhou,
Peter Uhd Jepsen,
Edoardo Stanzani,
Shinhee Yun,
Marcial Fernandez Castro,
Matthias Schwartzkopf,
Alexandros Koutsioubas,
Piotr de Silva,
Moises Espindola Rodriguez,
Luise Theil Kuhn,
Jens Wenzel Andreasen
Abstract:
We present a method to manipulate the final morphology of roll-to-roll slot-die coated poly(3-hexylthiophene) (P3HT) by optically exciting the p-type polymer in solution while coating. Our results provide a comprehensive picture of the entire knowledge chain, from demonstrating how to apply our method to a fundamental understanding of the changes in morphology and physical properties induced by ex…
▽ More
We present a method to manipulate the final morphology of roll-to-roll slot-die coated poly(3-hexylthiophene) (P3HT) by optically exciting the p-type polymer in solution while coating. Our results provide a comprehensive picture of the entire knowledge chain, from demonstrating how to apply our method to a fundamental understanding of the changes in morphology and physical properties induced by exciting P3HT while coating. By combining results from density functional theory and molecular dynamics simulations with a variety of X-ray experiments, absorption spectroscopy, and THz spectroscopy, we demonstrate the relationship between morphology and physical properties of the thin film. Specifically, in P3HT films excited with light during deposition, we observe changes in crystallinity and texture with more face-on orientation and increased out-of-plane charge mobility.
△ Less
Submitted 28 February, 2022;
originally announced March 2022.
-
Non-destructive determination of phase, size, and strain of individual grains in polycrystalline photovoltaic materials
Authors:
Mariana Mar Lucas,
Tiago Ramos,
Peter S. Jørgensen,
Stela Canulescu,
Peter Kenesei,
Jonathan Wright,
Henning F. Poulsen,
Jens W. Andreasen
Abstract:
We demonstrate a non-destructive approach to provide structural properties on the grain level for the absorber layer of kesterite solar cells. Kesterite solar cells are notoriously difficult to characterize structurally due to the co-existence of several phases with very similar lattice parameters. Specifically, we present a comprehensive study of 597 grains in the absorber layer of a 1.64% effici…
▽ More
We demonstrate a non-destructive approach to provide structural properties on the grain level for the absorber layer of kesterite solar cells. Kesterite solar cells are notoriously difficult to characterize structurally due to the co-existence of several phases with very similar lattice parameters. Specifically, we present a comprehensive study of 597 grains in the absorber layer of a 1.64% efficient Cu2ZnSnS4 (CZTS) thin-film solar cell, from which 15 grains correspond to the secondary phase ZnS. By means of three dimensional X-ray diffraction (3DXRD), we obtained statistics for the phase, size, orientation, and strain tensors of the grains, as well as their twin relations. We observe an average tensile stress in the plane of the film of ~ 70 MPa and a compressive stress along the normal to the film of ~ 145 MPa. At the grain level, we derive a 3D stress tensor that deviates from the biaxial model usually assumed for thin films. 41% of the grains are twins. We calculate the frequency of the six types of $Σ$3 boundaries, revealing that 180° rotations along axis <221> is the most frequent. This technique can be applied to polycrystalline thin film solar cells in general, where strain can influence the bandgap of the absorber layer material, and twin boundaries play a role in the charge transport mechanisms.
△ Less
Submitted 23 December, 2020;
originally announced December 2020.
-
Stable, carbon-free inks of Cu2ZnSnS4 nanoparticles synthesized at room temperature designed for roll-to-roll fabrication of solar cell absorber layers
Authors:
Christian Rein,
Sara Engberg,
Jens Wenzel Andreasen
Abstract:
We report on a novel room temperature approach for the synthesis of environmentally-friendly copper zinc tin sulfide ($Cu_2ZnSnS_4$) nanoparticles. The method is shown to be compositionally robust and able to produce $S^{2-}$-stabilized carbon-free nanoparticle inks that are suitable for an absorber layer in solar cells. No organic residues from the process were detected. The metal-composition and…
▽ More
We report on a novel room temperature approach for the synthesis of environmentally-friendly copper zinc tin sulfide ($Cu_2ZnSnS_4$) nanoparticles. The method is shown to be compositionally robust and able to produce $S^{2-}$-stabilized carbon-free nanoparticle inks that are suitable for an absorber layer in solar cells. No organic residues from the process were detected. The metal-composition and the occurrence of secondary phases is here correlated with synthesis conditions: By utilizing a reactant concentration of Cu/Sn < 1.8 and Sn(II) as tin-source it is possible to avoid the formation of $Cu_xS$-phases, which are detrimental for the solar cell performance when present in the final absorber layer. With nanoparticle sizes approaching the Bohr radius for $Cu_2ZnSnS_4$, the band gap can be broadened up to 1.7 eV. In addition, the conditions for forming stable, carbon-free aqueous inks of such $Cu_2ZnSnS_4$ nanoparticles are investigated and the stabilizing $NH_4^+/S^{2-}$-ion concentration affects the quality of the deposited absorber layer. The use of room temperature synthesis and stable aqueous ink formulations make the method suitable for roll-to-roll fabrication and upscaling.
△ Less
Submitted 21 June, 2019; v1 submitted 11 February, 2019;
originally announced February 2019.
-
Aligning tetracyanoplatinate thin films
Authors:
Christian Rein,
Jens W. Andreasen,
Martin M. Nielsen,
Morten Christensen
Abstract:
By using a zone-casting derivative method it is possible to create well-aligned 200 nm thin films of tetracyano platinate crystal wires, which cover more than 50% of the surface of the substrate. The aligned crystal wires deviate only slightly from the casting direction and can each exceed 100 um in length. Grazing incidence X-ray diffraction shows a 3.5 Å periodicity corresponding to the intracha…
▽ More
By using a zone-casting derivative method it is possible to create well-aligned 200 nm thin films of tetracyano platinate crystal wires, which cover more than 50% of the surface of the substrate. The aligned crystal wires deviate only slightly from the casting direction and can each exceed 100 um in length. Grazing incidence X-ray diffraction shows a 3.5 Å periodicity corresponding to the intrachain Pt-Pt distance found in single crystals and a 110 (crystal) orientation along the surface normal.
△ Less
Submitted 23 June, 2018;
originally announced June 2018.
