-
Mechanical modeling of innovative metamaterials alternating pentamode lattices and confinement plates
Authors:
F. Fraternali,
A. Amendola
Abstract:
This study examines the mechanical behavior of a novel class of mechanical metamaterials alternating pentamode lattices and stiffening plates. The unit cell of such lattices consists of a sub-lattice of the face cubic-centered unit cell typically analyzed in the current literature on pentamode materials. The studied systems exhibit only three soft deformation modes in the infinitesimal stretch-dom…
▽ More
This study examines the mechanical behavior of a novel class of mechanical metamaterials alternating pentamode lattices and stiffening plates. The unit cell of such lattices consists of a sub-lattice of the face cubic-centered unit cell typically analyzed in the current literature on pentamode materials. The studied systems exhibit only three soft deformation modes in the infinitesimal stretch-dominated regime, as opposed to the five zero-energy modes of unconfined pentamode lattices. We develop analytical formulae for the vertical and bending stiffness properties and study the dependence of such quantities on the main design parameters: the lattice constant, the solid volume fraction, the cross-section area of the rods, and the layer thickness. A noteworthy result is that the effective compression modulus of the analyzed structures is equal to two thirds of the Young modulus of the stiffest isotropic elastic networks currently available in the literature, being accompanied by zero-rigidity against infinitesimal shear and twisting mechanisms. The use of the proposed metamaterials as novel seismic-isolation devices and impact-protection equipment is discussed by drawing comparisons with the response of alternative devices already available or under development.
△ Less
Submitted 30 November, 2019;
originally announced February 2020.
-
Bending dominated response of layered mechanical metamaterials alternating pentamode lattices and confinement plates
Authors:
A. Amendola,
G. Carpentieri,
L. Feo,
F. Fraternali
Abstract:
A numerical study on the elastic response of single- and multi-layer systems formed by alternating pentamode lattices and stiffening plates is presented. Finite element simulations are conducted to analyze the dependence of the effective elastic moduli of such structures upon suitable aspect ratios, which characterize the geometry of the generic pentamode layer at the micro- and macro-scale, and t…
▽ More
A numerical study on the elastic response of single- and multi-layer systems formed by alternating pentamode lattices and stiffening plates is presented. Finite element simulations are conducted to analyze the dependence of the effective elastic moduli of such structures upon suitable aspect ratios, which characterize the geometry of the generic pentamode layer at the micro- and macro-scale, and the lamination scheme of the layered structure. The given numerical results highlight that the examined structures exhibit bending-dominated response, and are able to achieve low values of the effective shear modulus and, contemporarily, high values of the effective compression modulus. We are lead to conclude that confined pentamode lattices can be regarded as novel metamaterials that are well suited for seismic isolation and impact protection purposes. Their elastic response can be finely tuned by playing with several geometrical and mechanical design variables.
△ Less
Submitted 30 November, 2019;
originally announced January 2020.
-
Incremental auxetic response of composite lattices under isotropic prestress
Authors:
Ada Amendola,
Fernando Fraternali
Abstract:
This work studies the constitutive response of two- and three-dimensional lattice materials subject to isotropic prestress. The unit cell of the examined lattices is formed by an arbitrary number of junctions attached to a junction. Analytic formulae for second-order elastic constants and elastic stiffness coefficients of stretching-dominated lattices are provided. In addition, numerical results f…
▽ More
This work studies the constitutive response of two- and three-dimensional lattice materials subject to isotropic prestress. The unit cell of the examined lattices is formed by an arbitrary number of junctions attached to a junction. Analytic formulae for second-order elastic constants and elastic stiffness coefficients of stretching-dominated lattices are provided. In addition, numerical results for the incremental elastic moduli of composite lattices equipped with hard and soft rods are presented. The given results highlight that isotropically pre-tensioned lattices may exhibit marked variations of the elastic stiffness moduli in the prestressed state, over the values competing to the stress-free configuration. This study also discloses that prestressed lattices may feature incremental auxetic response, when composite architectures suitably combining hard and soft materials are employed for their fabrication.
△ Less
Submitted 4 December, 2019;
originally announced December 2019.
-
Mathematical modeling of a Cosserat method in finite-strain holonomic plasticity
Authors:
Thomas Blesgen,
Ada Amendola
Abstract:
This article deals with the mathematical derivation and the validation over benchmark examples of a numerical method for the solution of a finite-strain holonomic (rate-independent) Cosserat plasticity problem for materials, possibly with microstructure. Two improvements are made in contrast to earlier approaches: First, the micro-rotations are parameterized with the help of an Euler-Rodrigues for…
▽ More
This article deals with the mathematical derivation and the validation over benchmark examples of a numerical method for the solution of a finite-strain holonomic (rate-independent) Cosserat plasticity problem for materials, possibly with microstructure. Two improvements are made in contrast to earlier approaches: First, the micro-rotations are parameterized with the help of an Euler-Rodrigues formula related to quaternions. Secondly, as main result, a novel two-pass preconditioning scheme for searching the energy-minimizing solutions based on the limited memory Broyden-Fletcher-Goldstein-Shanno quasi-Newton method is proposed that consists of a predictor step and a corrector-iteration. After outlining the necessary adaptations to the model, numerical simulations compare the performance and efficiency of the new and the old algorithm. The proposed numerical model can be effectively employed for studying the mechanical response of complicated materials featuring large size effects.
△ Less
Submitted 6 June, 2019;
originally announced June 2019.
-
Accordion-like metamaterials with tunable ultra-wide low-frequency band gaps
Authors:
Anastasiia O. Krushynska,
Ada Amendola,
Federico Bosia,
Chiara Daraio,
Nicola M. Pugno,
Fernando Fraternali
Abstract:
We study lightweight, elastic metamaterials consisting of tensegrity-inspired prisms, which present wide, low-frequency band gaps. For their realization, we alternate tensegrity elements with solid discs in periodic arrangements that we call "accordion-like" meta-structures. We show through analytical calculations and numerical simulations that these structures are characterized by low-frequency b…
▽ More
We study lightweight, elastic metamaterials consisting of tensegrity-inspired prisms, which present wide, low-frequency band gaps. For their realization, we alternate tensegrity elements with solid discs in periodic arrangements that we call "accordion-like" meta-structures. We show through analytical calculations and numerical simulations that these structures are characterized by low-frequency band gaps with strong uniform wave attenuation due to the coupling of Bragg scattering and local resonance mechanisms. This coupling helps to overcome the inherent limit of a narrow band-gap width for conventional locally-resonant metamaterials and to extend the wave attenuation to wider frequency ranges. Moreover, the band gaps can be further increased, provided a minimum structural damping is present, and tuned to desired frequencies by changing the applied prestress levels in the tensegrity structure. Results are corroborated by parametric studies showing that the band-gap frequencies are preserved for wide variations of geometric and material structural properties.
△ Less
Submitted 6 April, 2018;
originally announced April 2018.
-
On the additive manufacturing, post-tensioning and testing of bi-material tensegrity structures
Authors:
A. Amendola,
E. Hernandez-Nava,
R. Goodall,
I. Todd,
R. E. Skelton,
F. Fraternali
Abstract:
An investigation on the additive manufacturing and the experimental testing of 3D models of tensegrity prisms and columns is presented. An electron beam melting facility (Arcam EBM S12) is employed to 3D print structures composed of tensegrity prisms endowed with rigid bases and temporary supports, which are made out of the titanium alloy Ti6Al4V. The temporary supports are removed after the addit…
▽ More
An investigation on the additive manufacturing and the experimental testing of 3D models of tensegrity prisms and columns is presented. An electron beam melting facility (Arcam EBM S12) is employed to 3D print structures composed of tensegrity prisms endowed with rigid bases and temporary supports, which are made out of the titanium alloy Ti6Al4V. The temporary supports are removed after the additive manufacturing phase, when Spectra cross-strings are added to the 3D printed models, and a suitable state of internal prestress is applied to the structure. The experimental part of the study shows that the examined structures feature sitffening-type elastic response under large or moderately large axial strains induced by compressive loading. Such a geometrically nonlinear behavior confirms previous theoretical results available in the literature, and paves the way to the use of tensegrity prisms and columns as innovative mechanical metamaterials and smart devices.
△ Less
Submitted 5 April, 2015;
originally announced April 2015.
-
Multiscale tunability of solitary wave dynamics in tensegrity metamaterials
Authors:
Fernando Fraternali,
Gerardo Carpentieri,
Ada Amendola,
Robert E. Skelton,
Vitali F. Nesterenko
Abstract:
A new class of strongly nonlinear metamaterials based on tensegrity concepts is proposed and the solitary wave dynamics under impact loading is investigated. Such systems can be tuned into elastic hardening or elastic softening regimes by adjusting local and global prestress. In the softening regime these metamaterials are able to transform initially compression pulse into a solitary rarefaction w…
▽ More
A new class of strongly nonlinear metamaterials based on tensegrity concepts is proposed and the solitary wave dynamics under impact loading is investigated. Such systems can be tuned into elastic hardening or elastic softening regimes by adjusting local and global prestress. In the softening regime these metamaterials are able to transform initially compression pulse into a solitary rarefaction wave followed by oscillatory tail with progressively decreasing amplitude. Interaction of a compression solitary pulse with an interface between elastically hardening and softening materials having correspondingly low-high acoustic impedances demonstrates anomalous behavior: a train of reflected compression solitary waves in the low impedance material; and a transmitted solitary rarefaction wave with oscillatory tail in high impedance material. The interaction of a rarefaction solitary wave with an interface between elastically softening and elastically hardening materials with high-low impedances also demonstrates anomalous behavior: a reflected solitary rarefaction wave with oscillatory tail in the high impedance branch; and a delayed train of transmitted compression solitary pulses in the low impedance branch. These anomalous impact transformation properties may allow for the design of ultimate impact mitigation devices without relying on energy dissipation.
△ Less
Submitted 16 October, 2014; v1 submitted 24 September, 2014;
originally announced September 2014.
-
On the mechanical modeling of the extreme softening/stiffening response of axially loaded tensegrity prisms
Authors:
Fernando Fraternali,
Gerardo Carpentieri,
Ada Amendola
Abstract:
We study the geometrically nonlinear behavior of uniformly compressed tensegrity prisms, through fully elastic and rigid--elastic models. The presented models predict a variety of mechanical behaviors in the regime of large displacements, including an extreme stiffening-type response, already known in the literature, and a newly discovered, extreme softening behavior. The latter may lead to a snap…
▽ More
We study the geometrically nonlinear behavior of uniformly compressed tensegrity prisms, through fully elastic and rigid--elastic models. The presented models predict a variety of mechanical behaviors in the regime of large displacements, including an extreme stiffening-type response, already known in the literature, and a newly discovered, extreme softening behavior. The latter may lead to a snap buckling event producing an axial collapse of the structure. The switching from one mechanical regime to another depends on the aspect ratio of the structure, the magnitude of the applied prestress, and the material properties of the constituent elements. We discuss potential acoustic applications of such behaviors, which are related to the design and manufacture of tensegrity lattices and innovative phononic crystals.
△ Less
Submitted 10 June, 2014; v1 submitted 7 June, 2014;
originally announced June 2014.
-
Experimental investigation of the softening-stiffening response of tensegrity prisms under compressive loading
Authors:
Ada Amendola,
Fernando Fraternali,
Gerardo Carpentieri,
Mauricio de Oliveira,
Robert E. Skelton
Abstract:
The present paper is concerned with the formulation of new assembly methods of bi-material tensegrity prisms, and the experimental characterization of the compressive response of such structures. The presented assembly techniques are easy to implement, including a string-first approach in the case of ordinary tensegrity prisms, and a base-first approach in the case of systems equipped with rigid b…
▽ More
The present paper is concerned with the formulation of new assembly methods of bi-material tensegrity prisms, and the experimental characterization of the compressive response of such structures. The presented assembly techniques are easy to implement, including a string-first approach in the case of ordinary tensegrity prisms, and a base-first approach in the case of systems equipped with rigid bases. The experimental section shows that the compressive response of tensegrity prisms switches from stiffening to softening under large displacements, in dependence on the current values of suitable geometric and prestress variables. Future research lines regarding the mechanical modeling of tensegrity prisms and their use as building blocks of nonlinear periodic lattices and acoustic metamaterials are discussed.
△ Less
Submitted 21 June, 2014; v1 submitted 4 June, 2014;
originally announced June 2014.
-
Continuum limits of bistable spring models of carbon nanotube arrays accounting for material damage
Authors:
T. Blesgen,
F. Fraternali,
J. R. Raney,
A. Amendola,
C. Daraio
Abstract:
Using chains of bistable springs, a model is derived to investigate the plastic behavior of carbon nanotube arrays with damage. We study the preconditioning effect due to the loading history by computing analytically the stress-strain pattern corresponding to a fatigue-type damage of the structure. We identify the convergence of the discrete response to the limiting case of infinitely many springs…
▽ More
Using chains of bistable springs, a model is derived to investigate the plastic behavior of carbon nanotube arrays with damage. We study the preconditioning effect due to the loading history by computing analytically the stress-strain pattern corresponding to a fatigue-type damage of the structure. We identify the convergence of the discrete response to the limiting case of infinitely many springs, both analytically in the framework of Gamma-convergence, as well as numerically.
△ Less
Submitted 10 December, 2011;
originally announced December 2011.
