-
Circuit cavity electromechanics in the strong coupling regime
Authors:
J. D. Teufel,
D. Li,
M. S. Allman,
K. Cicak,
A. J. Sirois,
J. D. Whittaker,
R. W. Simmonds
Abstract:
Demonstrating and exploiting the quantum nature of larger, more macroscopic mechanical objects would help us to directly investigate the limitations of quantum-based measurements and quantum information protocols, as well as test long standing questions about macroscopic quantum coherence. The field of cavity opto- and electro-mechanics, in which a mechanical oscillator is parametrically coupled t…
▽ More
Demonstrating and exploiting the quantum nature of larger, more macroscopic mechanical objects would help us to directly investigate the limitations of quantum-based measurements and quantum information protocols, as well as test long standing questions about macroscopic quantum coherence. The field of cavity opto- and electro-mechanics, in which a mechanical oscillator is parametrically coupled to an electromagnetic resonance, provides a practical architecture for the manipulation and detection of motion at the quantum level. Reaching this quantum level requires strong coupling, interaction timescales between the two systems that are faster than the time it takes for energy to be dissipated. By incorporating a free-standing, flexible aluminum membrane into a lumped-element superconducting resonant cavity, we have increased the single photon coupling strength between radio-frequency mechanical motion and resonant microwave photons by more than two orders of magnitude beyond the current state-of-the-art. A parametric drive tone at the difference frequency between the two resonant systems dramatically increases the overall coupling strength. This has allowed us to completely enter the strong coupling regime. This is evidenced by a maximum normal mode splitting of nearly six bare cavity line-widths. Spectroscopic measurements of these 'dressed states' are in excellent quantitative agreement with recent theoretical predictions. The basic architecture presented here provides a feasible path to ground-state cooling and subsequent coherent control and measurement of the quantum states of mechanical motion.
△ Less
Submitted 12 November, 2010;
originally announced November 2010.
-
Time-Domain Detection of Weakly Coupled TLS Fluctuators in Phase Qubits
Authors:
M. S. Allman,
F. Altomare,
J. D. Whittaker,
K. Cicak,
D. Li,
A. Sirois,
J. Strong,
J. D. Teufel,
R. W. Simmonds
Abstract:
We report on a method for detecting weakly coupled spurious two-level system fluctuators (TLSs) in superconducting qubits. This method is more sensitive that standard spectroscopic techniques for locating TLSs with a reduced data acquisition time.
We report on a method for detecting weakly coupled spurious two-level system fluctuators (TLSs) in superconducting qubits. This method is more sensitive that standard spectroscopic techniques for locating TLSs with a reduced data acquisition time.
△ Less
Submitted 15 April, 2010;
originally announced April 2010.
-
Measurement crosstalk between two phase qubits coupled by a coplanar waveguide
Authors:
Fabio Altomare,
Katarina Cicak,
Mika A. Sillanpää,
Michael S. Allman,
Adam J. Sirois,
Dale Li,
Jae I. Park,
Joshua A. Strong,
John D. Teufel,
Jed D. Whittaker,
Raymond W. Simmonds
Abstract:
We analyze the measurement crosstalk between two flux-biased phase qubits coupled by a resonant coplanar waveguide cavity. After the first qubit is measured, the superconducting phase can undergo damped oscillations resulting in an a.c. voltage that produces a frequency chirped noise signal whose frequency crosses that of the cavity. We show experimentally that the coplanar waveguide cavity acts…
▽ More
We analyze the measurement crosstalk between two flux-biased phase qubits coupled by a resonant coplanar waveguide cavity. After the first qubit is measured, the superconducting phase can undergo damped oscillations resulting in an a.c. voltage that produces a frequency chirped noise signal whose frequency crosses that of the cavity. We show experimentally that the coplanar waveguide cavity acts as a bandpass filter that can significantly reduce the crosstalk signal seen by the second qubit when its frequency is far from the cavity's resonant frequency. We present a simple classical description of the qubit behavior that agrees well with the experimental data. These results suggest that measurement crosstalk between superconducting phase qubits can be reduced by use of linear or possibly nonlinear resonant cavities as coupling elements.
△ Less
Submitted 2 February, 2010;
originally announced February 2010.
-
RFSQUID-Mediated Coherent Tunable Coupling Between a Superconducting Phase Qubit and a Lumped Element Resonator
Authors:
M. S. Allman,
F. Altomare,
J. D. Whittaker,
K. Cicak,
D. Li,
A. Sirois,
J. Strong,
J. D. Teufel,
R. W. Simmonds
Abstract:
We demonstrate coherent tunable coupling between a superconducting phase qubit and a lumped element resonator. The coupling strength is mediated by a flux-biased RF SQUID operated in the non-hysteretic regime. By tuning the applied flux bias to the RF SQUID we change the effective mutual inductance, and thus the coupling energy, between the phase qubit and resonator . We verify the modulation of…
▽ More
We demonstrate coherent tunable coupling between a superconducting phase qubit and a lumped element resonator. The coupling strength is mediated by a flux-biased RF SQUID operated in the non-hysteretic regime. By tuning the applied flux bias to the RF SQUID we change the effective mutual inductance, and thus the coupling energy, between the phase qubit and resonator . We verify the modulation of coupling strength from 0 to $100 MHz$ by observing modulation in the size of the splitting in the phase qubit's spectroscopy, as well as coherently by observing modulation in the vacuum Rabi oscillation frequency when on resonance. The measured spectroscopic splittings and vacuum Rabi oscillations agree well with theoretical predictions.
△ Less
Submitted 6 January, 2010;
originally announced January 2010.
-
Low-loss superconducting resonant circuits using vacuum-gap-based microwave components
Authors:
Katarina Cicak,
Dale Li,
Joshua A. Strong,
Michael S. Allman,
Fabio Altomare,
Adam J. Sirois,
Jed D. Whittaker,
John D. Teufel,
Raymond W. Simmonds
Abstract:
We have produced high-quality complex microwave circuits, such as multiplexed resonators and superconducting phase qubits, using a "vacuum-gap" technology that eliminates lossy dielectric materials. We have improved our design and fabrication strategy beyond our earlier work, leading to increased yield, enabling the realization of these complex circuits. We incorporate both novel vacuum-gap wiring…
▽ More
We have produced high-quality complex microwave circuits, such as multiplexed resonators and superconducting phase qubits, using a "vacuum-gap" technology that eliminates lossy dielectric materials. We have improved our design and fabrication strategy beyond our earlier work, leading to increased yield, enabling the realization of these complex circuits. We incorporate both novel vacuum-gap wiring crossovers (VGX) for gradiometric inductors and vacuum-gap capacitors(VGC) on chip to produce resonant circuits that have large internal quality factors (30,000<Q<165,000) at 50 mK, outperforming most dielectric-filled devices. Resonators with VGCs as large as 180 pF confirm single mode behavior of our lumped-element components.
△ Less
Submitted 25 June, 2010; v1 submitted 27 October, 2009;
originally announced October 2009.
-
Vacuum-Gap Capacitors for Low-Loss Superconducting Resonant Circuits
Authors:
Katarina Cicak,
Michael S. Allman,
Joshua A. Strong,
Kevin D. Osborn,
Raymond W. Simmonds
Abstract:
Low-loss microwave components are used in many superconducting resonant circuits from multiplexed readouts of low-temperature detector arrays to quantum bits. Two-level system defects in amorphous dielectric materials cause excess energy loss. In an effort to improve capacitor components, we have used optical lithography and micromachining techniques to develop superconducting parallel-plate cap…
▽ More
Low-loss microwave components are used in many superconducting resonant circuits from multiplexed readouts of low-temperature detector arrays to quantum bits. Two-level system defects in amorphous dielectric materials cause excess energy loss. In an effort to improve capacitor components, we have used optical lithography and micromachining techniques to develop superconducting parallel-plate capacitors in which lossy dielectrics are replaced by vacuum gaps. Resonance measurements at 50 mK on lumped LC circuits that incorporate these vacuum-gap capacitors (VGCs) reveal loss tangents at low powers as low as 4x10^{-5}, significantly lower than with capacitors using amorphous dielectrics. VGCs are structurally robust, small, and easily scaled to capacitance values above 100 pF.
△ Less
Submitted 10 October, 2008;
originally announced October 2008.
-
Parametric coupling between macroscopic quantum resonators
Authors:
L. Tian,
M. S. Allman,
R. W. Simmonds
Abstract:
Time-dependent linear coupling between macroscopic quantum resonator modes generates both a parametric amplification also known as a {}"squeezing operation" and a beam splitter operation, analogous to quantum optical systems. These operations, when applied properly, can robustly generate entanglement and squeezing for the quantum resonator modes. Here, we present such coupling schemes between a…
▽ More
Time-dependent linear coupling between macroscopic quantum resonator modes generates both a parametric amplification also known as a {}"squeezing operation" and a beam splitter operation, analogous to quantum optical systems. These operations, when applied properly, can robustly generate entanglement and squeezing for the quantum resonator modes. Here, we present such coupling schemes between a nanomechanical resonator and a superconducting electrical resonator using applied microwave voltages as well as between two superconducting lumped-element electrical resonators using a r.f. SQUID-mediated tunable coupler. By calculating the logarithmic negativity of the partially transposed density matrix, we quantitatively study the entanglement generated at finite temperatures. We also show that characterization of the nanomechanical resonator state after the quantum operations can be achieved by detecting the electrical resonator only. Thus, one of the electrical resonator modes can act as a probe to measure the entanglement of the coupled systems and the degree of squeezing for the other resonator mode.
△ Less
Submitted 12 September, 2008; v1 submitted 29 June, 2006;
originally announced June 2006.
