Showing 1–7 of 7 results for author: van Amesfoort, A S

First release of Apertif imaging survey data

Authors: Elizabeth A. K. Adams, B. Adebahr, W. J. G. de Blok, H. Denes, K. M. Hess, J. M. van der Hulst, A. Kutkin, D. M. Lucero, R. Morganti, V. A. Moss, T. A. Oosterloo, E. Orru, R. Schulz, A. S. van Amesfoort, A. Berger, O. M. Boersma, M. Bouwhuis, R. van den Brink, W. A. van Cappellen, L. Connor, A. H. W. M. Coolen, S. Damstra, G. N. J. van Diepen, T. J. Dijkema, N. Ebbendorf , et al. (34 additional authors not shown)

Abstract: (Abridged) Apertif is a phased-array feed system for WSRT, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program started on 1 July 2019, with the last observations taken on 28 February 2022. We describe the release of data products from the first year of survey operations, through 30 June 2020. We focus on defining quality control metrics for the processed data… ▽ More (Abridged) Apertif is a phased-array feed system for WSRT, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program started on 1 July 2019, with the last observations taken on 28 February 2022. We describe the release of data products from the first year of survey operations, through 30 June 2020. We focus on defining quality control metrics for the processed data products. The Apertif imaging pipeline, Apercal, automatically produces non-primary beam corrected continuum images, polarization images and cubes, and uncleaned spectral line and dirty beam cubes for each beam of an Apertif imaging observation. For this release, processed data products are considered on a beam-by-beam basis within an observation. We validate the continuum images by using metrics that identify deviations from Gaussian noise in the residual images. If the continuum image passes validation, we release all processed data products for a given beam. We apply further validation to the polarization and line data products. We release all raw observational data from the first year of survey observations, for a total of 221 observations of 160 independent target fields, covering approximately one thousand square degrees of sky. Images and cubes are released on a per beam basis, and 3374 beams are released. The median noise in the continuum images is 41.4 uJy/bm, with a slightly lower median noise of 36.9 uJy/bm in the Stokes V polarization image. The median angular resolution is 11.6"/sin(Dec). The median noise for all line cubes, with a spectral resolution of 36.6 kHz, is 1.6 mJy/bm, corresponding to a 3-sigma HI column density sensitivity of 1.8 x 10^20 atoms cm^-2 over 20 km/s (for a median angular resolution of 24" x 15"). We also provide primary beam images for each individual Apertif compound beam. The data are made accessible using a Virtual Observatory interface. △ Less

Submitted 22 November, 2022; v1 submitted 10 August, 2022; originally announced August 2022.

Comments: Accepted for publication in A&A, updated Figure 1

Journal ref: A&A 667, A38 (2022)

Apertif, Phased Array Feeds for the Westerbork Synthesis Radio Telescope

Authors: W. A. van Cappellen, T. A. Oosterloo, M. A. W. Verheijen, E. A. K. Adams, B. Adebahr, R. Braun, K. M. Hess, H. Holties, J. M. van der Hulst, B. Hut, E. Kooistra, J. van Leeuwen, G. M. Loose, R. Morganti, V. A. Moss, E. Orrú, M. Ruiter, A. P. Schoenmakers, N. J. Vermaas, S. J. Wijnholds, A. S. van Amesfoort, M. J. Arts, J. J. Attema, L. Bakker, C. G. Bassa , et al. (65 additional authors not shown)

Abstract: We describe the APERture Tile In Focus (Apertif) system, a phased array feed (PAF) upgrade of the Westerbork Synthesis Radio Telescope which has transformed this telescope into a high-sensitivity, wide field-of-view L-band imaging and transient survey instrument. Using novel PAF technology, up to 40 partially overlapping beams can be formed on the sky simultaneously, significantly increasing the s… ▽ More We describe the APERture Tile In Focus (Apertif) system, a phased array feed (PAF) upgrade of the Westerbork Synthesis Radio Telescope which has transformed this telescope into a high-sensitivity, wide field-of-view L-band imaging and transient survey instrument. Using novel PAF technology, up to 40 partially overlapping beams can be formed on the sky simultaneously, significantly increasing the survey speed of the telescope. With this upgraded instrument, an imaging survey covering an area of 2300 deg2 is being performed which will deliver both continuum and spectral line data sets, of which the first data has been publicly released. In addition, a time domain transient and pulsar survey covering 15,000 deg2 is in progress. An overview of the Apertif science drivers, hardware and software of the upgraded telescope is presented, along with its key performance characteristics. △ Less

Submitted 30 September, 2021; v1 submitted 29 September, 2021; originally announced September 2021.

Comments: 29 pages, 42 figures, accepted for publication by A&A

Journal ref: A&A 658, A146 (2022)

Cobalt: A GPU-based correlator and beamformer for LOFAR

Authors: P. Chris Broekema, J. Jan David Mol, Ronald Nijboer, Alexander S. van Amesfoort, Michiel A. Brentjens, G. Marcel Loose, Wouter F. A. Klijn, John W. Romein

Abstract: For low-frequency radio astronomy, software correlation and beamforming on general purpose hardware is a viable alternative to custom designed hardware. LOFAR, a new-generation radio telescope centered in the Netherlands with international stations in Germany, France, Ireland, Latvia, Poland, Sweden and the UK, has successfully used software real-time processors based on IBM Blue Gene technology s… ▽ More For low-frequency radio astronomy, software correlation and beamforming on general purpose hardware is a viable alternative to custom designed hardware. LOFAR, a new-generation radio telescope centered in the Netherlands with international stations in Germany, France, Ireland, Latvia, Poland, Sweden and the UK, has successfully used software real-time processors based on IBM Blue Gene technology since 2004. Since then, developments in technology have allowed us to build a system based on commercial off-the-shelf components that combines the same capabilities with lower operational cost. In this paper we describe the design and implementation of a GPU-based correlator and beamformer with the same capabilities as the Blue Gene based systems. We focus on the design approach taken, and show the challenges faced in selecting an appropriate system. The design, implementation and verification of the software system shows the value of a modern test-driven development approach. Operational experience, based on three years of operations, demonstrates that a general purpose system is a good alternative to the previous supercomputer-based system or custom-designed hardware. △ Less

Submitted 30 April, 2018; v1 submitted 15 January, 2018; originally announced January 2018.

Journal ref: Astronomy and Computing, Volume 23, April 2018, Pages 180-192

LOFAR discovery of the fastest-spinning millisecond pulsar in the Galactic field

Authors: C. G. Bassa, Z. Pleunis, J. W. T. Hessels, E. C. Ferrara, R. P. Breton, N. V. Gusinskaia, V. I. Kondratiev, S. Sanidas, L. Nieder, C. J. Clark, T. Li, A. S. van Amesfoort, T. H. Burnett, F. Camilo, P. F. Michelson, S. M. Ransom, P. S. Ray, K. Wood

Abstract: We report the discovery of PSR J0952$-$0607, a 707-Hz binary millisecond pulsar which is now the fastest-spinning neutron star known in the Galactic field (i.e., outside of a globular cluster). PSR J0952$-$0607 was found using LOFAR at a central observing frequency of 135 MHz, well below the 300 MHz to 3 GHz frequencies typically used in pulsar searches. The discovery is part of an ongoing LOFAR s… ▽ More We report the discovery of PSR J0952$-$0607, a 707-Hz binary millisecond pulsar which is now the fastest-spinning neutron star known in the Galactic field (i.e., outside of a globular cluster). PSR J0952$-$0607 was found using LOFAR at a central observing frequency of 135 MHz, well below the 300 MHz to 3 GHz frequencies typically used in pulsar searches. The discovery is part of an ongoing LOFAR survey targeting unassociated Fermi Large Area Telescope $γ$-ray sources. PSR J0952$-$0607 is in a 6.42-hr orbit around a very low-mass companion ($M_\mathrm{c}\gtrsim0.02$ M$_\odot$) and we identify a strongly variable optical source, modulated at the orbital period of the pulsar, as the binary companion. The light curve of the companion varies by 1.6 mag from $r^\prime=22.2$ at maximum to $r^\prime>23.8$, indicating that it is irradiated by the pulsar wind. Swift observations place a 3-$σ$ upper limit on the $0.3-10$ keV X-ray luminosity of $L_X < 1.1 \times 10^{31}$ erg s$^{-1}$ (using the 0.97 kpc distance inferred from the dispersion measure). Though no eclipses of the radio pulsar are observed, the properties of the system classify it as a black widow binary. The radio pulsed spectrum of PSR J0952$-$0607, as determined through flux density measurements at 150 and 350 MHz, is extremely steep with $α\sim-3$ (where $S \propto ν^α$). We discuss the growing evidence that the fastest-spinning radio pulsars have exceptionally steep radio spectra, as well as the prospects for finding more sources like PSR J0952$-$0607. △ Less

Submitted 5 September, 2017; originally announced September 2017.

Comments: 9 pages, 3 figures, 1 table, published in ApJ letters

Journal ref: Bassa, C. G., et al. 2017, ApJL, 846, L20

A millisecond pulsar discovery in a survey of unidentified Fermi $γ$-ray sources with LOFAR

Authors: Z. Pleunis, C. G. Bassa, J. W. T. Hessels, V. I. Kondratiev, F. Camilo, I. Cognard, J. -M. Griessmeier, B. W. Stappers, A. S. van Amesfoort, S. Sanidas

Abstract: Using LOFAR, we have performed a very-low-frequency (115-155 MHz) radio survey for millisecond pulsars (MSPs). The survey targeted 52 unidentified Fermi $γ$-ray sources. Employing a combination of coherent and incoherent dedispersion, we have mitigated the dispersive effects of the interstellar medium while maintaining sensitivity to fast-spinning pulsars. Toward 3FGL J1553.1+5437 we have found PS… ▽ More Using LOFAR, we have performed a very-low-frequency (115-155 MHz) radio survey for millisecond pulsars (MSPs). The survey targeted 52 unidentified Fermi $γ$-ray sources. Employing a combination of coherent and incoherent dedispersion, we have mitigated the dispersive effects of the interstellar medium while maintaining sensitivity to fast-spinning pulsars. Toward 3FGL J1553.1+5437 we have found PSR J1552+5437, the first MSP to be discovered (through its pulsations) at a radio frequency $<$ 200 MHz. PSR J1552+5437 is an isolated MSP with a 2.43 ms spin period and a dispersion measure of 22.9 pc cm$^{-3}$. The pulsar has a very steep radio spectral index ($α< -$2.8 $\pm$ 0.4). We obtain a phase-connected timing solution combining the 0.74 years of radio observations with $γ$-ray photon arrival times covering 7.5 years of Fermi observations. We find that the radio and $γ$-ray pulse profiles of PSR J1552+5437 appear to be nearly aligned. The very steep spectrum of PSR J1552+5437, along with other recent discoveries, hints at a population of radio MSPs that have been missed in surveys using higher observing frequencies. Detecting such steep spectrum sources is important for mapping the population of MSPs down to the shortest spin periods, understanding their emission in comparison to slow pulsars, and quantifying the prospects for future surveys with low-frequency radio telescopes like SKA-Low and its precursors. △ Less

Submitted 5 September, 2017; originally announced September 2017.

Comments: 10 pages, 4 figures, published in ApJL

Journal ref: 2017, ApJL, 846, L19

The LOFAR Pilot Surveys for Pulsars and Fast Radio Transients

Authors: Thijs Coenen, Joeri van Leeuwen, Jason W. T. Hessels, Ben W. Stappers, Vladislav I. Kondratiev, A. Alexov, R. P. Breton, A. Bilous, S. Cooper, H. Falcke, R. A. Fallows, V. Gajjar, J. -M. Grießmeier, T. E. Hassall, A. Karastergiou, E. F. Keane, M. Kramer, M. Kuniyoshi, A. Noutsos, S. Osłowski, M. Pilia, M. Serylak, C. Schrijvers, C. Sobey, S. ter Veen , et al. (65 additional authors not shown)

Abstract: We have conducted two pilot surveys for radio pulsars and fast transients with the Low-Frequency Array (LOFAR) around 140 MHz and here report on the first low-frequency fast-radio burst limit and the discovery of two new pulsars. The first survey, the LOFAR Pilot Pulsar Survey (LPPS), observed a large fraction of the northern sky, ~1.4 x 10^4 sq. deg, with 1-hr dwell times. Each observation covere… ▽ More We have conducted two pilot surveys for radio pulsars and fast transients with the Low-Frequency Array (LOFAR) around 140 MHz and here report on the first low-frequency fast-radio burst limit and the discovery of two new pulsars. The first survey, the LOFAR Pilot Pulsar Survey (LPPS), observed a large fraction of the northern sky, ~1.4 x 10^4 sq. deg, with 1-hr dwell times. Each observation covered ~75 sq. deg using 7 independent fields formed by incoherently summing the high-band antenna fields. The second pilot survey, the LOFAR Tied-Array Survey (LOTAS), spanned ~600 sq. deg, with roughly a 5-fold increase in sensitivity compared with LPPS. Using a coherent sum of the 6 LOFAR "Superterp" stations, we formed 19 tied-array beams, together covering 4 sq. deg per pointing. From LPPS we derive a limit on the occurrence, at 142 MHz, of dispersed radio bursts of < 150 /day/sky, for bursts brighter than S > 107 Jy for the narrowest searched burst duration of 0.66 ms. In LPPS, we re-detected 65 previously known pulsars. LOTAS discovered two pulsars, the first with LOFAR or any digital aperture array. LOTAS also re-detected 27 previously known pulsars. These pilot studies show that LOFAR can efficiently carry out all-sky surveys for pulsars and fast transients, and they set the stage for further surveying efforts using LOFAR and the planned low-frequency component of the Square Kilometer Array. △ Less

Submitted 2 August, 2014; originally announced August 2014.

Comments: 18 pages, 10 figures, accepted for A&A

Journal ref: A&A 570, A60 (2014)

LOFAR Sparse Image Reconstruction

Authors: H. Garsden, J. N. Girard, J. L. Starck, S. Corbel, C. Tasse, A. Woiselle, J. P. McKean, A. S. van Amesfoort, J. Anderson, I. M. Avruch, R. Beck, M. J. Bentum, P. Best, F. Breitling, J. Broderick, M. Brüggen, H. R. Butcher, B. Ciardi, F. de Gasperin, E. de Geus, M. de Vos, S. Duscha, J. Eislöffel, D. Engels, H. Falcke , et al. (56 additional authors not shown)

Abstract: Context. The LOw Frequency ARray (LOFAR) radio telescope is a giant digital phased array interferometer with multiple antennas distributed in Europe. It provides discrete sets of Fourier components of the sky brightness. Recovering the original brightness distribution with aperture synthesis forms an inverse problem that can be solved by various deconvolution and minimization methods Aims. Recent… ▽ More Context. The LOw Frequency ARray (LOFAR) radio telescope is a giant digital phased array interferometer with multiple antennas distributed in Europe. It provides discrete sets of Fourier components of the sky brightness. Recovering the original brightness distribution with aperture synthesis forms an inverse problem that can be solved by various deconvolution and minimization methods Aims. Recent papers have established a clear link between the discrete nature of radio interferometry measurement and the "compressed sensing" (CS) theory, which supports sparse reconstruction methods to form an image from the measured visibilities. Empowered by proximal theory, CS offers a sound framework for efficient global minimization and sparse data representation using fast algorithms. Combined with instrumental direction-dependent effects (DDE) in the scope of a real instrument, we developed and validated a new method based on this framework Methods. We implemented a sparse reconstruction method in the standard LOFAR imaging tool and compared the photometric and resolution performance of this new imager with that of CLEAN-based methods (CLEAN and MS-CLEAN) with simulated and real LOFAR data Results. We show that i) sparse reconstruction performs as well as CLEAN in recovering the flux of point sources; ii) performs much better on extended objects (the root mean square error is reduced by a factor of up to 10); and iii) provides a solution with an effective angular resolution 2-3 times better than the CLEAN images. Conclusions. Sparse recovery gives a correct photometry on high dynamic and wide-field images and improved realistic structures of extended sources (of simulated and real LOFAR datasets). This sparse reconstruction method is compatible with modern interferometric imagers that handle DDE corrections (A- and W-projections) required for current and future instruments such as LOFAR and SKA △ Less

Submitted 6 March, 2015; v1 submitted 27 June, 2014; originally announced June 2014.

Comments: Published in A&A, 19 pages, 9 figures

Journal ref: A&A 575, A90 (2015)