Showing 1–26 of 26 results for author: Wetzstein, M

Euclid preparation LX. The use of HST images as input for weak-lensing image simulations

Authors: Euclid Collaboration, D. Scognamiglio, T. Schrabback, M. Tewes, B. Gillis, H. Hoekstra, E. M. Huff, O. Marggraf, T. Kitching, R. Massey, I. Tereno, C. S. Carvalho, A. Robertson, G. Congedo, N. Aghanim, B. Altieri, A. Amara, S. Andreon, N. Auricchio, C. Baccigalupi, M. Baldi, S. Bardelli, P. Battaglia, C. Bodendorf, D. Bonino , et al. (223 additional authors not shown)

Abstract: Data from the Euclid space telescope will enable cosmic shear measurements with very small statistical errors, requiring corresponding systematic error control level. A common approach to correct for shear biases involves calibrating shape measurement methods using image simulations with known input shear. Given their high resolution, Hubble Space Telescope (HST) galaxies can, in principle, be uti… ▽ More Data from the Euclid space telescope will enable cosmic shear measurements with very small statistical errors, requiring corresponding systematic error control level. A common approach to correct for shear biases involves calibrating shape measurement methods using image simulations with known input shear. Given their high resolution, Hubble Space Telescope (HST) galaxies can, in principle, be utilised to emulate Euclid observations. In this work, we employ a GalSim-based testing environment to investigate whether uncertainties in the HST point spread function (PSF) model or in data processing techniques introduce significant biases in weak-lensing (WL) shear calibration. We used single Sérsic galaxy models to simulate both HST and Euclid observations. We then `Euclidised' our HST simulations and compared the results with the directly simulated Euclid-like images. For this comparison, we utilised a moment-based shape measurement algorithm and galaxy model fits. Through the Euclidisation procedure, we effectively reduced the residual multiplicative biases in shear measurements to sub-percent levels. This achievement was made possible by employing either the native pixel scales of the instruments, utilising the Lanczos15 interpolation kernel, correcting for noise correlations, and ensuring consistent galaxy signal-to-noise ratios between simulation branches. However, the Euclidisation procedure requires further analysis on the impact of the correlated noise, to estimate calibration bias. Additionally, we conducted an in-depth analysis of the accuracy of TinyTim HST PSF models using star fields observed in the F606W and F814W filters. We observe that F606W images exhibit a broader scatter in the recovered best-fit focus, compared to those in the F814W filter. △ Less

Submitted 14 January, 2025; originally announced January 2025.

Comments: Accepted by A&A. 23 pages, 20 figures, Euclid pre-launch key paper

Euclid. I. Overview of the Euclid mission

Authors: Euclid Collaboration, Y. Mellier, Abdurro'uf, J. A. Acevedo Barroso, A. Achúcarro, J. Adamek, R. Adam, G. E. Addison, N. Aghanim, M. Aguena, V. Ajani, Y. Akrami, A. Al-Bahlawan, A. Alavi, I. S. Albuquerque, G. Alestas, G. Alguero, A. Allaoui, S. W. Allen, V. Allevato, A. V. Alonso-Tetilla, B. Altieri, A. Alvarez-Candal, S. Alvi, A. Amara , et al. (1115 additional authors not shown)

Abstract: The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14… ▽ More The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14,000 deg^2 of extragalactic sky. In addition to accurate weak lensing and clustering measurements that probe structure formation over half of the age of the Universe, its primary probes for cosmology, these exquisite data will enable a wide range of science. This paper provides a high-level overview of the mission, summarising the survey characteristics, the various data-processing steps, and data products. We also highlight the main science objectives and expected performance. △ Less

Submitted 24 September, 2024; v1 submitted 22 May, 2024; originally announced May 2024.

Comments: Accepted for publication in the A&A special issue`Euclid on Sky'

Journal ref: A&A 697, A1 (2025)

Euclid: Calibrating photometric redshifts with spectroscopic cross-correlations

Authors: K. Naidoo, H. Johnston, B. Joachimi, J. L. van den Busch, H. Hildebrandt, O. Ilbert, O. Lahav, N. Aghanim, B. Altieri, A. Amara, M. Baldi, R. Bender, C. Bodendorf, E. Branchini, M. Brescia, J. Brinchmann, S. Camera, V. Capobianco, C. Carbone, J. Carretero, F. J. Castander, M. Castellano, S. Cavuoti, A. Cimatti, R. Cledassou , et al. (104 additional authors not shown)

Abstract: Cosmological constraints from key probes of the Euclid imaging survey rely critically on the accurate determination of the true redshift distributions, $n(z)$, of tomographic redshift bins. We determine whether the mean redshift, $<z>$, of ten Euclid tomographic redshift bins can be calibrated to the Euclid target uncertainties of $σ(<z>)<0.002\,(1+z)$ via cross-correlation, with spectroscopic sam… ▽ More Cosmological constraints from key probes of the Euclid imaging survey rely critically on the accurate determination of the true redshift distributions, $n(z)$, of tomographic redshift bins. We determine whether the mean redshift, $<z>$, of ten Euclid tomographic redshift bins can be calibrated to the Euclid target uncertainties of $σ(<z>)<0.002\,(1+z)$ via cross-correlation, with spectroscopic samples akin to those from the Baryon Oscillation Spectroscopic Survey (BOSS), Dark Energy Spectroscopic Instrument (DESI), and Euclid's NISP spectroscopic survey. We construct mock Euclid and spectroscopic galaxy samples from the Flagship simulation and measure small-scale clustering redshifts up to redshift $z<1.8$ with an algorithm that performs well on current galaxy survey data. The clustering measurements are then fitted to two $n(z)$ models: one is the true $n(z)$ with a free mean; the other a Gaussian Process modified to be restricted to non-negative values. We show that $<z>$ is measured in each tomographic redshift bin to an accuracy of order 0.01 or better. By measuring the clustering redshifts on subsets of the full Flagship area, we construct scaling relations that allow us to extrapolate the method performance to larger sky areas than are currently available in the mock. For the full expected Euclid, BOSS, and DESI overlap region of approximately 6000 deg$^{2}$, the uncertainties attainable by clustering redshifts exceeds the Euclid requirement by at least a factor of three for both $n(z)$ models considered, although systematic biases limit the accuracy. Clustering redshifts are an extremely effective method for redshift calibration for Euclid if the sources of systematic biases can be determined and removed, or calibrated-out with sufficiently realistic simulations. We outline possible future work, in particular an extension to higher redshifts with quasar reference samples. △ Less

Submitted 24 February, 2023; v1 submitted 22 August, 2022; originally announced August 2022.

Comments: 14 pages, 8 figures, accepted for publication in A&A

Journal ref: A&A 670, A149 (2023)

Euclid preparation: I. The Euclid Wide Survey

Authors: R. Scaramella, J. Amiaux, Y. Mellier, C. Burigana, C. S. Carvalho, J. -C. Cuillandre, A. Da Silva, A. Derosa, J. Dinis, E. Maiorano, M. Maris, I. Tereno, R. Laureijs, T. Boenke, G. Buenadicha, X. Dupac, L. M. Gaspar Venancio, P. Gómez-Álvarez, J. Hoar, J. Lorenzo Alvarez, G. D. Racca, G. Saavedra-Criado, J. Schwartz, R. Vavrek, M. Schirmer , et al. (216 additional authors not shown)

Abstract: Euclid is an ESA mission designed to constrain the properties of dark energy and gravity via weak gravitational lensing and galaxy clustering. It will carry out a wide area imaging and spectroscopy survey (EWS) in visible and near-infrared, covering roughly 15,000 square degrees of extragalactic sky on six years. The wide-field telescope and instruments are optimized for pristine PSF and reduced s… ▽ More Euclid is an ESA mission designed to constrain the properties of dark energy and gravity via weak gravitational lensing and galaxy clustering. It will carry out a wide area imaging and spectroscopy survey (EWS) in visible and near-infrared, covering roughly 15,000 square degrees of extragalactic sky on six years. The wide-field telescope and instruments are optimized for pristine PSF and reduced straylight, producing very crisp images. This paper presents the building of the Euclid reference survey: the sequence of pointings of EWS, Deep fields, Auxiliary fields for calibrations, and spacecraft movements followed by Euclid as it operates in a step-and-stare mode from its orbit around the Lagrange point L2. Each EWS pointing has four dithered frames; we simulate the dither pattern at pixel level to analyse the effective coverage. We use up-to-date models for the sky background to define the Euclid region-of-interest (RoI). The building of the reference survey is highly constrained from calibration cadences, spacecraft constraints and background levels; synergies with ground-based coverage are also considered. Via purposely-built software optimized to prioritize best sky areas, produce a compact coverage, and ensure thermal stability, we generate a schedule for the Auxiliary and Deep fields observations and schedule the RoI with EWS transit observations. The resulting reference survey RSD_2021A fulfills all constraints and is a good proxy for the final solution. Its wide survey covers 14,500 square degrees. The limiting AB magnitudes ($5σ$ point-like source) achieved in its footprint are estimated to be 26.2 (visible) and 24.5 (near-infrared); for spectroscopy, the H$_α$ line flux limit is $2\times 10^{-16}$ erg cm$^{-2}$ s$^{-1}$ at 1600 nm; and for diffuse emission the surface brightness limits are 29.8 (visible) and 28.4 (near-infrared) mag arcsec$^{-2}$. △ Less

Submitted 2 August, 2021; originally announced August 2021.

Comments: 43 pages, 51 figures, submitted to A&A

Journal ref: A&A 662, A112 (2022)

Euclid: Estimation of the impact of correlated readout noise for flux measurements with the Euclid NISP instrument

Authors: A. Jimenez Munoz, J. Macias-Perez, A. Secroun, W. Gillard, B. Kubik, N. Auricchio, A. Balestra, C. Bodendorf, D. Bonino, E. Branchini, M. Brescia, J. Brinchmann, V. Capobianco, C. Carbone, J. Carretero, R. Casas, M. Castellano, S. Cavuoti, A. Cimatti, R. Cledassou, G. Congedo, L. Conversi, Y. Copin, L. Corcione, A. Costille , et al. (74 additional authors not shown)

Abstract: The Euclid satellite, to be launched by ESA in 2022, will be a major instrument for cosmology for the next decades. \Euclid\ is composed of two instruments: the Visible (VIS) instrument and the Near Infrared Spectromete and Photometer (NISP). In this work we estimate the implications of correlated readout noise in the NISP detectors for the final in-flight flux measurements. Considering the multip… ▽ More The Euclid satellite, to be launched by ESA in 2022, will be a major instrument for cosmology for the next decades. \Euclid\ is composed of two instruments: the Visible (VIS) instrument and the Near Infrared Spectromete and Photometer (NISP). In this work we estimate the implications of correlated readout noise in the NISP detectors for the final in-flight flux measurements. Considering the multiple accumulated (MACC) readout mode, for which the UTR (Up The Ramp) exposure frames are averaged in groups, we derive an analytical expression for the noise covariance matrix between groups in the presence of correlated noise. We also characterize the correlated readout noise properties in the NISP engineering grade detectors using long dark integrations. For this purpose, we assume a $(1/f)^{\, α}$-like noise model and fit the model parameters to the data, obtaining typical values of $σ= 19.7^{+1.1}_{-0.8}$ e$^{-} \rm{Hz}^{-0.5}$, $f_{\rm{knee}} = (5.2^{+1.8}_{-1.3}) \times 10^{-3} \, \rm{Hz}$ and $α= 1.24 ^{+0.26}_{-0.21}$. Furthermore, via realistic simulations and using a maximum likelihood flux estimator we derive the bias between the input flux and the recovered one. We find that using our analytical expression for the covariance matrix of the correlated readout noise we diminish this bias by up to a factor of four with respect to the white noise approximation for the covariance matrix. Finally, we conclude that the final bias on the in-flight NISP flux measurements should still be negligible even in the white noise approximation, which is taken as a baseline for the Euclid\on-board processing △ Less

Submitted 26 April, 2021; originally announced April 2021.

Euclid: Identification of asteroid streaks in simulated images using StreakDet software

Authors: M. Pöntinen, M. Granvik, A. A. Nucita, L. Conversi, B. Altieri, N. Auricchio, C. Bodendorf, D. Bonino, M. Brescia, V. Capobianco, J. Carretero, B. Carry, M. Castellano, R. Cledassou, G. Congedo, L. Corcione, M. Cropper, S. Dusini, M. Frailis, E. Franceschi, M. Fumana, B. Garilli, F. Grupp, F. Hormuth, H. Israel , et al. (35 additional authors not shown)

Abstract: The ESA Euclid space telescope could observe up to 150 000 asteroids as a side product of its primary cosmological mission. Asteroids appear as trailed sources, that is streaks, in the images. Owing to the survey area of 15 000 square degrees and the number of sources, automated methods have to be used to find them. Euclid is equipped with a visible camera, VIS (VISual imager), and a near-infrared… ▽ More The ESA Euclid space telescope could observe up to 150 000 asteroids as a side product of its primary cosmological mission. Asteroids appear as trailed sources, that is streaks, in the images. Owing to the survey area of 15 000 square degrees and the number of sources, automated methods have to be used to find them. Euclid is equipped with a visible camera, VIS (VISual imager), and a near-infrared camera, NISP (Near-Infrared Spectrometer and Photometer), with three filters. We aim to develop a pipeline to detect fast-moving objects in Euclid images, with both high completeness and high purity. We tested the StreakDet software to find asteroids from simulated Euclid images. We optimized the parameters of StreakDet to maximize completeness, and developed a post-processing algorithm to improve the purity of the sample of detected sources by removing false-positive detections. StreakDet finds 96.9% of the synthetic asteroid streaks with apparent magnitudes brighter than 23rd magnitude and streak lengths longer than 15 pixels ($10\,{\rm arcsec\,h^{-1}}$), but this comes at the cost of finding a high number of false positives. The number of false positives can be radically reduced with multi-streak analysis, which utilizes all four dithers obtained by Euclid. StreakDet is a good tool for identifying asteroids in Euclid images, but there is still room for improvement, in particular, for finding short (less than 13 pixels, corresponding to 8$\,{\rm arcsec\,h^{-1}}$) and/or faint streaks (fainter than the apparent magnitude of 23). △ Less

Submitted 10 November, 2020; originally announced November 2020.

Comments: 12 pages, 5 figures

Journal ref: A&A 644, A35 (2020)

Euclid preparation: VIII. The Complete Calibration of the Colour-Redshift Relation survey: VLT/KMOS observations and data release

Authors: Euclid Collaboration, V. Guglielmo, R. Saglia, F. J. Castander, A. Galametz, S. Paltani, R. Bender, M. Bolzonella, P. Capak, O. Ilbert, D. C. Masters, D. Stern, S. Andreon, N. Auricchio, A. Balaguera-Antolínez, M. Baldi, S. Bardelli, A. Biviano, C. Bodendorf, D. Bonino, E. Bozzo, E. Branchini, S. Brau-Nogue, M. Brescia, C. Burigana , et al. (123 additional authors not shown)

Abstract: The Complete Calibration of the Colour-Redshift Relation survey (C3R2) is a spectroscopic effort involving ESO and Keck facilities designed to empirically calibrate the galaxy colour-redshift relation - P(z|C) to the Euclid depth (i_AB=24.5) and is intimately linked to upcoming Stage IV dark energy missions based on weak lensing cosmology. The aim is to build a spectroscopic calibration sample tha… ▽ More The Complete Calibration of the Colour-Redshift Relation survey (C3R2) is a spectroscopic effort involving ESO and Keck facilities designed to empirically calibrate the galaxy colour-redshift relation - P(z|C) to the Euclid depth (i_AB=24.5) and is intimately linked to upcoming Stage IV dark energy missions based on weak lensing cosmology. The aim is to build a spectroscopic calibration sample that is as representative as possible of the galaxies of the Euclid weak lensing sample. In order to minimise the number of spectroscopic observations to fill the gaps in current knowledge of the P(z|C), self-organising map (SOM) representations of the galaxy colour space have been constructed. Here we present the first results of an ESO@ VLT Large Programme approved in the context of C3R2, which makes use of the two VLT optical and near-infrared multi-object spectrographs, FORS2 and KMOS. This paper focuses on high-quality spectroscopic redshifts of high-z galaxies observed with the KMOS spectrograph in the H- and K-bands. A total of 424 highly-reliable z are measured in the 1.3<=z<=2.5 range, with total success rates of 60.7% in the H-band and 32.8% in the K-band. The newly determined z fill 55% of high and 35% of lower priority empty SOM grid cells. We measured Halpha fluxes in a 1."2 radius aperture from the spectra of the spectroscopically confirmed galaxies and converted them into star formation rates. In addition, we performed an SED fitting analysis on the same sample in order to derive stellar masses, E(B-V), total magnitudes, and SFRs. We combine the results obtained from the spectra with those derived via SED fitting, and we show that the spectroscopic failures come from either weakly star-forming galaxies (at z<1.7, i.e. in the H-band) or low S/N spectra (in the K-band) of z>2 galaxies. △ Less

Submitted 6 July, 2020; originally announced July 2020.

Comments: 21 pages, 12 figures

Euclid: The selection of quiescent and star-forming galaxies using observed colours

Authors: L. Bisigello, U. Kuchner, C. J. Conselice, S. Andreon, M. Bolzonella, P. -A. Duc, B. Garilli, A. Humphrey, C. Maraston, M. Moresco, L. Pozzetti, C. Tortora, G. Zamorani, N. Auricchio, J. Brinchmann, V. Capobianco, J. Carretero, F. J. Castander, M. Castellano, S. Cavuoti, A. Cimatti, R. Cledassou, G. Congedo, L. Conversi, L. Corcione , et al. (49 additional authors not shown)

Abstract: The Euclid mission will observe well over a billion galaxies out to $z\sim6$ and beyond. This will offer an unrivalled opportunity to investigate several key questions for understanding galaxy formation and evolution. The first step for many of these studies will be the selection of a sample of quiescent and star-forming galaxies, as is often done in the literature by using well known colour techn… ▽ More The Euclid mission will observe well over a billion galaxies out to $z\sim6$ and beyond. This will offer an unrivalled opportunity to investigate several key questions for understanding galaxy formation and evolution. The first step for many of these studies will be the selection of a sample of quiescent and star-forming galaxies, as is often done in the literature by using well known colour techniques such as the `UVJ' diagram. However, given the limited number of filters available for the Euclid telescope, the recovery of such rest-frame colours will be challenging. We therefore investigate the use of observed Euclid colours, on their own and together with ground-based u-band observations, for selecting quiescent and star-forming galaxies. The most efficient colour combination, among the ones tested in this work, consists of the (u-VIS) and (VIS-J) colours. We find that this combination allows users to select a sample of quiescent galaxies complete to above $\sim70\%$ and with less than 15$\%$ contamination at redshifts in the range $0.75<z<1$. For galaxies at high-z or without the u-band complementary observations, the (VIS-Y) and (J-H) colours represent a valid alternative, with $>65\%$ completeness level and contamination below 20$\%$ at $1<z<2$ for finding quiescent galaxies. In comparison, the sample of quiescent galaxies selected with the traditional UVJ technique is only $\sim20\%$ complete at $z<3$, when recovering the rest-frame colours using mock Euclid observations. This shows that our new methodology is the most suitable one when only Euclid bands, along with u-band imaging, are available. △ Less

Submitted 16 March, 2020; originally announced March 2020.

Comments: 19 pages, 15 figures, 5 tables, accepted for publication in MNRAS

Detection and Removal of Artifacts in Astronomical Images

Authors: Shantanu Desai, Joseph Mohr, Emmanuel Bertin, Martin Kummel, Michael Wetzstein

Abstract: Astronomical images from optical photometric surveys are typically contaminated with transient artifacts such as cosmic rays, satellite trails and scattered light. We have developed and tested an algorithm that removes these artifacts using a deep, artifact free, static sky coadd image built up through the median combination of point spread function (PSF) homogenized, overlapping single epoch imag… ▽ More Astronomical images from optical photometric surveys are typically contaminated with transient artifacts such as cosmic rays, satellite trails and scattered light. We have developed and tested an algorithm that removes these artifacts using a deep, artifact free, static sky coadd image built up through the median combination of point spread function (PSF) homogenized, overlapping single epoch images. Transient artifacts are detected and masked in each single epoch image through comparison with an artifact free, PSF-matched simulated image that is constructed using the PSF-corrected, model fitting catalog from the artifact free coadd image together with the position variable PSF model of the single epoch image. This approach works well not only for cleaning single epoch images with worse seeing than the PSF homogenized coadd, but also the traditionally much more challenging problem of cleaning single epoch images with better seeing. In addition to masking transient artifacts, we have developed an interpolation approach that uses the local PSF and performs well in removing artifacts whose widths are smaller than the PSF full width at half maximum, including cosmic rays, the peaks of saturated stars and bleed trails. We have tested this algorithm on Dark Energy Survey Science Verification data and present performance metrics. More generally, our algorithm can be applied to any survey which images the same part of the sky multiple times. △ Less

Submitted 16 April, 2016; v1 submitted 26 January, 2016; originally announced January 2016.

Comments: 17 pages, 6 figures. Accepted for publication in Astronomy and Computing

Journal ref: Astronomy and Computing 16, 67 (2016)

The JScanam Map-Maker Method Applied to Herschel/PACS Photometer Observations

Authors: Javier Graciá-Carpio, Michael Wetzstein, Hélène Roussel

Abstract: JScanam is the default map-maker for Herschel/PACS photometer observations. Making use of the redundant information from multiple passages on the sky with different scanning directions, JScanam is able to remove the $1/f$ noise that severely affects PACS far-infrared maps, preserving at the same time point sources and real extended emission. The JScanam pipeline has been designed to run automatica… ▽ More JScanam is the default map-maker for Herschel/PACS photometer observations. Making use of the redundant information from multiple passages on the sky with different scanning directions, JScanam is able to remove the $1/f$ noise that severely affects PACS far-infrared maps, preserving at the same time point sources and real extended emission. The JScanam pipeline has been designed to run automatically on all kind of maps and astronomical environments, from Galactic star-forming clouds to deep cosmological fields. The results from the JScanam automatic pipeline can be easily inspected and downloaded from the Herschel Science Archive and the new ESA Sky interface. △ Less

Submitted 10 December, 2015; originally announced December 2015.

Comments: 4 pages; proceedings of ADASS XXV; to be published in ASP Conf. Ser., Lorente, N.~P.~F. and Shortridge, K., Eds

CosmoDM and its application to Pan-STARRS data

Authors: S. Desai, J. J. Mohr, R. Henderson, M. Kummel, K. Paech, M. Wetzstein

Abstract: The Cosmology Data Management system (CosmoDM) is an automated and flexible data management system for the processing and calibration of data from optical photometric surveys. It is designed to run on supercomputers and to minimize disk I/O to enable scaling to very high throughput during periods of reprocessing. It serves as an early prototype for one element of the ground-based processing requir… ▽ More The Cosmology Data Management system (CosmoDM) is an automated and flexible data management system for the processing and calibration of data from optical photometric surveys. It is designed to run on supercomputers and to minimize disk I/O to enable scaling to very high throughput during periods of reprocessing. It serves as an early prototype for one element of the ground-based processing required by the Euclid mission and will also be employed in the preparation of ground based data needed in the eROSITA X-ray all sky survey mission. CosmoDM consists of two main pipelines. The first is the single-epoch or detrending pipeline, which is used to carry out the photometric and astrometric calibration of raw exposures. The second is the co- addition pipeline, which combines the data from individual exposures into deeper coadd images and science ready catalogs. A novel feature of CosmoDM is that it uses a modified stack of As- tromatic software which can read and write tile compressed images. Since 2011, CosmoDM has been used to process data from the DECam, the CFHT MegaCam and the Pan-STARRS cameras. In this paper we shall describe how processed Pan-STARRS data from CosmoDM has been used to optically confirm and measure photometric redshifts of Planck-based Sunyaev-Zeldovich effect selected cluster candidates. △ Less

Submitted 23 June, 2015; originally announced June 2015.

Comments: 11 pages, 4 figures. Proceedings of Precision Astronomy with Fully Depleted CCDs Workshop (2014). Accepted for publication in JINST

Journal ref: Journal of Instrumentation, 10, C06014 (2015)

A Systematic Look at the Effects of Radiative Feedback on Disc Galaxy Formation

Authors: Rok Roškar, Romain Teyssier, Oscar Agertz, Markus Wetzstein, Ben Moore

Abstract: Galaxy formation models and simulations rely on various feedback mechanisms to reproduce the observed baryonic scaling relations and galaxy morphologies. Although dwarf galaxy and giant elliptical properties can be explained using feedback from supernova and active galactic nuclei, Milky Way-sized galaxies still represent a challenge to current theories of galaxy formation. In this paper, we explo… ▽ More Galaxy formation models and simulations rely on various feedback mechanisms to reproduce the observed baryonic scaling relations and galaxy morphologies. Although dwarf galaxy and giant elliptical properties can be explained using feedback from supernova and active galactic nuclei, Milky Way-sized galaxies still represent a challenge to current theories of galaxy formation. In this paper, we explore the possible role of feedback from stellar radiation in regulating the main properties of disk galaxies such as our own Milky Way. We have performed a suite of cosmological simulations of the same $\sim10^{12} {\rm M}_{\odot}$ halo selected based on its rather typical mass accretion history. We have implemented radiative feedback from young stars using a crude model of radiative transfer for ultraviolet (UV) and infrared (IR) radiation. However, the model is realistic enough such that the dust opacity plays a direct role in regulating the efficiency of our feedback mechanism. We have explored various models for the dust opacity, assuming different constant dust temperatures, as well as a varying dust temperature model. We find that while strong radiative feedback appears as a viable mechanism to regulate the stellar mass fraction in massive galaxies, it also prevents the formation of discs with reasonable morphologies. In models with strong stellar radiation feedback, stellar discs are systematically too thick while the gas disc morphology is completely destroyed due to the efficient mixing between the feedback-affected gas and its surroundings. At the resolution of our simulation suite, we find it impossible to preserve spiral disc morphology while at the same time expelling enough baryons to satisfy the abundance matching constraints. △ Less

Submitted 1 September, 2014; v1 submitted 28 August, 2013; originally announced August 2013.

Comments: accepted to MNRAS

The effect of the high-pass filter data reduction technique on the Herschel PACS Photometer PSF and noise

Authors: P. Popesso, B. Magnelli, S. Buttiglione, D. Lutz, A. Poglitsch, S. Berta, R. Nordon, B. Altieri, H. Aussel, N. Billot, R. Gastaud, B. Ali, Z. Balog, A. Cava, H. Feuchtgruber, B. Gonzalez Garcia, N. Geis, C. Kiss, U. Klaas, H. Linz, X. C. Liu, A. Moor, B. Morin, T. Muller, M. Nielbock , et al. (14 additional authors not shown)

Abstract: We investigate the effect of the "high-pass filter" data reduction technique on the Herschel PACS PSF and noise of the PACS maps at the 70, 100 and 160 um bands and in medium and fast scan speeds. This branch of the PACS Photometer pipeline is the most used for cosmological observations and for point-source observations.The calibration of the flux loss due to the median removal applied by the PACS… ▽ More We investigate the effect of the "high-pass filter" data reduction technique on the Herschel PACS PSF and noise of the PACS maps at the 70, 100 and 160 um bands and in medium and fast scan speeds. This branch of the PACS Photometer pipeline is the most used for cosmological observations and for point-source observations.The calibration of the flux loss due to the median removal applied by the PACS pipeline (high-pass filter) is done via dedicated simulations obtained by "polluting" real PACS timelines with fake sources at different flux levels. The effect of the data reduction parameter settings on the final map noise is done by using selected observations of blank fields with high data redundancy. We show that the running median removal can cause significant flux losses at any flux level. We analyse the advantages and disadvantages of several masking strategies and suggest that a mask based on putting circular patches on prior positions is the best solution to reduce the amount of flux loss. We provide a calibration of the point-source flux loss for several masking strategies in a large range of data reduction parameters, and as a function of the source flux. We also show that, for stacking analysis, the impact of the high-pass filtering effect is to reduce significantly the clustering effect. The analysis of the global noise and noise components of the PACS maps shows that the dominant parameter in determining the final noise is the high-pass filter width. We also provide simple fitting functions to build the error map from the coverage map and to estimate the cross-correlation correction factor in a representative portion of the data reduction parameter space. △ Less

Submitted 18 November, 2012; originally announced November 2012.

Comments: 32 pages, 28 figures, submitted to A&A

PACS Evolutionary Probe (PEP) - A Herschel Key Program

Authors: D. Lutz, A. Poglitsch, B. Altieri, P. Andreani, H. Aussel, S. Berta, A. Bongiovanni, D. Brisbin, A. Cava, J. Cepa, A. Cimatti, E. Daddi, H. Dominguez-Sanchez, D. Elbaz, N. M. Forster Schreiber, R. Genzel, A. Grazian, C. Gruppioni, M. Harwit, E. Le Floc'h, G. Magdis, B. Magnelli, R. Maiolino, R. Nordon, A. M. Perez Garcia , et al. (13 additional authors not shown)

Abstract: Deep far-infrared photometric surveys studying galaxy evolution and the nature of the cosmic infrared background are a key strength of the Herschel mission. We describe the scientific motivation for the PACS Evolutionary Probe (PEP) guaranteed time key program and its role in the complement of Herschel surveys, and the field selection which includes popular multiwavelength fields such as GOODS, CO… ▽ More Deep far-infrared photometric surveys studying galaxy evolution and the nature of the cosmic infrared background are a key strength of the Herschel mission. We describe the scientific motivation for the PACS Evolutionary Probe (PEP) guaranteed time key program and its role in the complement of Herschel surveys, and the field selection which includes popular multiwavelength fields such as GOODS, COSMOS, Lockman Hole, ECDFS, EGS. We provide an account of the observing strategies and data reduction methods used. An overview of first science results illustrates the potential of PEP in providing calorimetric star formation rates for high redshift galaxy populations, thus testing and superseeding previous extrapolations from other wavelengths, and enabling a wide range of galaxy evolution studies. △ Less

Submitted 16 June, 2011; originally announced June 2011.

Comments: 13 pages, 12 figures, accepted for publication in A&A

Star formation in AGN hosts in GOODS-N

Authors: L. Shao, D. Lutz, R. Nordon, R. Maiolino, D. M. Alexander, B. Altieri, P. Andreani, H. Aussel, F. E. Bauer, S. Berta, A. Bongiovanni, W. N. Brandt, M. Brusa, A. Cava, J. Cepa, A. Cimatti, E. Daddi, H. Dominguez-Sanchez, D. Elbaz, N. M. Forster Schreiber, N. Geis, R. Genzel, A. Grazian, C. Gruppioni, G. Magdis , et al. (18 additional authors not shown)

Abstract: Sensitive Herschel far-infrared observations can break degeneracies that were inherent to previous studies of star formation in high-z AGN hosts. Combining PACS 100 and 160um observations of the GOODS-N field with 2Msec Chandra data, we detect ~20% of X-ray AGN individually at >3sig. The host far-infrared luminosity of AGN with L2-10~10^43erg/s increases with redshift by an order of magnitude from… ▽ More Sensitive Herschel far-infrared observations can break degeneracies that were inherent to previous studies of star formation in high-z AGN hosts. Combining PACS 100 and 160um observations of the GOODS-N field with 2Msec Chandra data, we detect ~20% of X-ray AGN individually at >3sig. The host far-infrared luminosity of AGN with L2-10~10^43erg/s increases with redshift by an order of magnitude from z=0 to z~1. In contrast, there is little dependence of far-infrared luminosity on AGN luminosity, for L2-10<~10^44erg/s AGN at z>~1. We do not find a dependence of far-infrared luminosity on X-ray obscuring column, for our sample which is dominated by L2-10<10^44erg/s AGN. In conjunction with properties of local and luminous high-z AGN, we interpret these results as reflecting the interplay between two paths of AGN/host coevolution. A correlation of AGN luminosity and host star formation is traced locally over a wide range of luminosities and also extends to luminous high z AGN. This correlation reflects an evolutionary connection, likely via merging. For lower AGN luminosities, star formation is similar to that in non-active massive galaxies and shows little dependence on AGN luminosity. The level of this secular, non-merger driven star formation increasingly dominates over the correlation at increasing redshift. △ Less

Submitted 14 May, 2010; originally announced May 2010.

Comments: Accepted for publication in A&A Herschel issue. 4 pages, 6 figures

Herschel deep far-infrared counts through the Abell 2218 cluster-lens

Authors: B. Altieri, S. Berta, D. Lutz, J. -P. Kneib, L. Metcalfe, P. Andreani, H. Aussel, A. Bongiovanni, A. Cava, J. Cepa, L. Ciesla, A. Cimatti, E. Daddi, H. Dominguez, D. Elbaz, N. M. Forster Schreiber, R. Genzel, C. Gruppioni, B. Magnelli, G. Magdis, R. Maiolino, R. Nordon, A. M. Perez Garcia, A. Poglitsch, P. Popesso , et al. (13 additional authors not shown)

Abstract: Gravitational lensing by massive galaxy clusters allows study of the population of intrinsically faint infrared galaxies that lie below the sensitivity and confusion limits of current infrared and submillimeter telescopes. We present ultra-deep PACS 100 and 160 microns observations toward the cluster lens Abell 2218, to penetrate the Herschel confusion limit. We derive source counts down to a flux… ▽ More Gravitational lensing by massive galaxy clusters allows study of the population of intrinsically faint infrared galaxies that lie below the sensitivity and confusion limits of current infrared and submillimeter telescopes. We present ultra-deep PACS 100 and 160 microns observations toward the cluster lens Abell 2218, to penetrate the Herschel confusion limit. We derive source counts down to a flux density of 1 mJy at 100 microns and 2 mJy at 160 microns, aided by strong gravitational lensing. At these levels, source densities are 20 and 10 beams/source in the two bands, approaching source density confusion at 160 microns. The slope of the counts below the turnover of the Euclidean-normalized differential curve is constrained in both bands and is consistent with most of the recent backwards evolutionary models. By integrating number counts over the flux range accessed by Abell 2218 lensing (0.94-35 mJy at 100 microns and 1.47-35 mJy at 160 microns, we retrieve a cosmic infrared background (CIB) surface brightness of ~8.0 and ~9.9 nW m^-2 sr^-1, in the respective bands. These values correspond to 55% (+/- 24%) and 77% (+/- 31%) of DIRBE direct measurements. Combining Abell 2218 results with wider/shallower fields, these figures increase to 62% (+/- 25%) and 88% (+/- 32%) CIB total fractions, resolved at 100 and 160 microns, disregarding the high uncertainties of DIRBE absolute values. △ Less

Submitted 24 May, 2010; v1 submitted 10 May, 2010; originally announced May 2010.

Comments: Accepted for publication on the A&A Herschel Special Issue, final version

The Photodetector Array Camera and Spectrometer (PACS) on the Herschel Space Observatory

Authors: A. Poglitsch, C. Waelkens, N. Geis, H. Feuchtgruber, B. Vandenbussche, L. Rodriguez, O. Krause, E. Renotte, C. van Hoof, P. Saraceno, J. Cepa, F. Kerschbaum, P. Agnese, B. Ali, B. Altieri, P. Andreani, J. -L. Augueres, Z. Balog, L. Barl, O. H. Bauer, N. Belbachir, M. Benedettini, N. Billot, O. Boulade, H. Bischof , et al. (58 additional authors not shown)

Abstract: The Photodetector Array Camera and Spectrometer (PACS) is one of the three science instruments on ESA's far infrared and submillimetre observatory. It employs two Ge:Ga photoconductor arrays (stressed and unstressed) with 16x25 pixels, each, and two filled silicon bolometer arrays with 16x32 and 32x64 pixels, respectively, to perform integral-field spectroscopy and imaging photometry in the 60-210… ▽ More The Photodetector Array Camera and Spectrometer (PACS) is one of the three science instruments on ESA's far infrared and submillimetre observatory. It employs two Ge:Ga photoconductor arrays (stressed and unstressed) with 16x25 pixels, each, and two filled silicon bolometer arrays with 16x32 and 32x64 pixels, respectively, to perform integral-field spectroscopy and imaging photometry in the 60-210μ m wavelength regime. In photometry mode, it simultaneously images two bands, 60-85μ m or 85-125μ\m and 125-210μ m, over a field of view of ~1.75'x3.5', with close to Nyquist beam sampling in each band. In spectroscopy mode, it images a field of 47"x47", resolved into 5x5 pixels, with an instantaneous spectral coverage of ~1500km/s and a spectral resolution of ~175km/s. We summarise the design of the instrument, describe observing modes, calibration, and data analysis methods, and present our current assessment of the in-orbit performance of the instrument based on the Performance Verification tests. PACS is fully operational, and the achieved performance is close to or better than the pre-launch predictions. △ Less

Submitted 20 May, 2010; v1 submitted 10 May, 2010; originally announced May 2010.

The first Herschel view of the mass-SFR link in high-z galaxies

Authors: G. Rodighiero, A. Cimatti, C. Gruppioni, P. Popesso, P. Andreani, B. Altieri, H. Aussel, S. Berta, A. Bongiovanni, D. Brisbin, A. Cava, J. Cepa, E. Daddi, H. Dominguez-Sanchez, D. Elbaz, A. Fontana, N. Forster Schreiber, A. Franceschini, R. Genzel, A. Grazian, D. Lutz, G. Magdis, M. Magliocchetti, B. Magnelli, R. Maiolino , et al. (15 additional authors not shown)

Abstract: We exploit deep observations of the GOODS-N field taken with PACS, on board of Herschel, as part of the PEP guaranteed time, to study the link between star formation and stellar mass in galaxies to z~2. Starting from a stellar mass-selected sample of ~4500 galaxies with mag[4.5mu]<23 (AB), we identify ~350 objects with a PACS detection at 100 or 160mu and ~1500 with only Spitzer 24 mu counterpart.… ▽ More We exploit deep observations of the GOODS-N field taken with PACS, on board of Herschel, as part of the PEP guaranteed time, to study the link between star formation and stellar mass in galaxies to z~2. Starting from a stellar mass-selected sample of ~4500 galaxies with mag[4.5mu]<23 (AB), we identify ~350 objects with a PACS detection at 100 or 160mu and ~1500 with only Spitzer 24 mu counterpart. Stellar masses and total IR luminosities (LIR) are estimated by fitting the SEDs. Consistently with other Herschel results, we find that LIR based only on 24 mu data is overestimated by a median factor ~1.8 at z~2, whereas it is underestimated (with our approach) up to a factor ~1.6 at 0.5<z<1.0. We then exploit this calibration to correct LIR based on the MIPS fluxes. These results clearly show how Herschel is fundamental to constrain LIR, and hence the SFR, of high redshift galaxies. Using the galaxies detected with PACS (and/or MIPS), we investigate the existence and evolution of the relations between the star formation rate (SFR), the specific star formation rate (SSFR=SFR/mass) and the stellar mass. Moreover, in order to avoid selection effects, we also repeat this study through a stacking analysis on the PACS images to fully exploit the far-IR information also for the Herschel and Spitzer undetected subsamples. We find that the SSFR-mass relation steepens with redshift, being almost flat at z<1.0 and reaching a slope of alpha=-0.50^(+0.13)_(-0.16) at z~2, at odds with recent works based on radio-stacking analysis at the same redshift. The mean SSFR of galaxies increases with redshift, by a factor ~15 for massive M>10^(11) (M_sun) galaxies from z=0 to z=2, and seems to flatten at z>1.5 in this mass range. Moreover, the most massive galaxies have the lowest SSFR at any z, implying that they have formed their stars earlier and more rapidly than their low mass counterparts. △ Less

Submitted 6 May, 2010; originally announced May 2010.

Comments: Accepted for publication in the A&A Herschel Special issue

Herschel PEP: The star-formation rates of 1.5<z<2.5 massive galaxies

Authors: R. Nordon, D. Lutz, L. Shao, B. Magnelli, S. Berta, B. Altieri, P. Andreani, H. Aussel, A. Bongiovanni, A. Cava, J. Cepa, A. Cimatti, E. Daddi, H. Dominguez, D. Elbaz, N. M. Forster Schreiber, R. Genzel, A. Grazian, G. Magdis, R. Maiolino, A. M. Perez Garcia, A. Poglitsch, P. Popesso, F. Pozzi, L. Riguccini , et al. (9 additional authors not shown)

Abstract: The star formation rate (SFR) is a key parameter in the study of galaxy evolution. The accuracy of SFR measurements at z~2 has been questioned following a disagreement between observations and theoretical models. The latter predict SFRs at this redshift that are typically a factor 4 or more lower than the measurements. We present star-formation rates based on calorimetric measurements of the far-i… ▽ More The star formation rate (SFR) is a key parameter in the study of galaxy evolution. The accuracy of SFR measurements at z~2 has been questioned following a disagreement between observations and theoretical models. The latter predict SFRs at this redshift that are typically a factor 4 or more lower than the measurements. We present star-formation rates based on calorimetric measurements of the far-infrared (FIR) luminosities for massive 1.5<z<2.5, normal star-forming galaxies (SFGs), which do not depend on extinction corrections and/or extrapolations of spectral energy distributions. The measurements are based on observations in GOODS-N with the Photodetector Array Camera & Spectrometer (PACS) onboard Herschel, as part of the PACS Evolutionary Probe (PEP) project, that resolve for the first time individual SFGs at these redshifts at FIR wavelengths. We compare FIR-based SFRs to the more commonly used 24 micron and UV SFRs. We find that SFRs from 24 micron alone are higher by a factor of ~4-7.5 than the true SFRs. This overestimation depends on luminosity: gradually increasing for log L(24um)>12.2 L_sun. The SFGs and AGNs tend to exhibit the same 24 micron excess. The UV SFRs are in closer agreement with the FIR-based SFRs. Using a Calzetti UV extinction correction results in a mean excess of up to 0.3 dex and a scatter of 0.35 dex from the FIR SFRs. The previous UV SFRs are thus confirmed and the mean excess, while narrowing the gap, is insufficient to explain the discrepancy between the observed SFRs and simulation predictions. △ Less

Submitted 17 May, 2010; v1 submitted 6 May, 2010; originally announced May 2010.

Comments: Accepted for publication in the A&A Herschel first results special issue. v2 Correction to the meta data only

Dissecting the cosmic infra-red background with Herschel/PEP

Authors: S. Berta, B. Magnelli, D. Lutz, B. Altieri, H. Aussel, P. Andreani, O. Bauer, A. Bongiovanni, A. Cava, J. Cepa, A. Cimatti, E. Daddi, H. Dominguez, D. Elbaz, H. Feuchtgruber, N. M. Foerster Schreiber, R. Genzel, C. Gruppioni, R. Katterloher, G. Magdis, R. Maiolino, R. Nordon, A. M. Perez Garcia, A. Poglitsch, P. Popesso , et al. (12 additional authors not shown)

Abstract: The constituents of the cosmic IR background (CIB) are studied at its peak wavelengths (100 and 160 um) by exploiting Herschel/PACS observations of the GOODS-N, Lockman Hole, and COSMOS fields in the PACS Evolutionary Probe (PEP) guaranteed-time survey. The GOODS-N data reach 3 sigma depths of ~3.0 mJy at 100 um and ~5.7 mJy at 160 um. At these levels, source densities are 40 and 18 beams/source,… ▽ More The constituents of the cosmic IR background (CIB) are studied at its peak wavelengths (100 and 160 um) by exploiting Herschel/PACS observations of the GOODS-N, Lockman Hole, and COSMOS fields in the PACS Evolutionary Probe (PEP) guaranteed-time survey. The GOODS-N data reach 3 sigma depths of ~3.0 mJy at 100 um and ~5.7 mJy at 160 um. At these levels, source densities are 40 and 18 beams/source, respectively, thus hitting the confusion limit at 160 um. Differential number counts extend from a few mJy up to 100-200 mJy, and are approximated as a double power law, with the break lying between 5 and 10 mJy. The available ancillary information allows us to split number counts into redshift bins. At z<=0.5 we isolate a class of luminous sources (L(IR)~1e11 Lsun), whose SEDs resemble late-spiral galaxies, peaking at ~130 um restframe and significantly colder than what is expected on the basis of pre-Herschel models. By integrating number counts over the whole covered flux range, we obtain a surface brightness of 6.36 +/- 1.67 and 6.58 +/-1.62 [nW m^-2 sr^-1] at 100 and 160 um, resolving ~45% and ~52% of the CIB, respectively. When stacking 24 um sources, the inferred CIB lies within 1.1 sigma and 0.5 sigma from direct measurements in the two bands, and fractions increase to 50% and 75%.Most of this resolved CIB fraction was radiated at z<=1.0, with 160 um sources found at higher redshift than 100 um ones. △ Less

Submitted 6 May, 2010; originally announced May 2010.

Comments: Accepted for publication on the A&A Herschel Special Issue

Modelling Shear Flows with SPH and Grid Based Methods

Authors: Veronika Junk, Stefanie Walch, Fabian Heitsch, Andreas Burkert, Markus Wetzstein, Marc Schartmann, Daniel Price

Abstract: Given the importance of shear flows for astrophysical gas dynamics, we study the evolution of the Kelvin-Helmholtz instability (KHI) analytically and numerically. We derive the dispersion relation for the two-dimensional KHI including viscous dissipation. The resulting expression for the growth rate is then used to estimate the intrinsic viscosity of four numerical schemes depending on code-specif… ▽ More Given the importance of shear flows for astrophysical gas dynamics, we study the evolution of the Kelvin-Helmholtz instability (KHI) analytically and numerically. We derive the dispersion relation for the two-dimensional KHI including viscous dissipation. The resulting expression for the growth rate is then used to estimate the intrinsic viscosity of four numerical schemes depending on code-specific as well as on physical parameters. Our set of numerical schemes includes the Tree-SPH code VINE, an alternative SPH formulation developed by Price (2008), and the finite-volume grid codes FLASH and PLUTO. In the first part, we explicitly demonstrate the effect of dissipation-inhibiting mechanisms such as the Balsara viscosity on the evolution of the KHI. With VINE, increasing density contrasts lead to a continuously increasing suppression of the KHI (with complete suppression from a contrast of 6:1 or higher). The alternative SPH formulation including an artificial thermal conductivity reproduces the analytically expected growth rates up to a density contrast of 10:1. The second part addresses the shear flow evolution with FLASH and PLUTO. Both codes result in a consistent non-viscous evolution (in the equal as well as in the different density case) in agreement with the analytical prediction. The viscous evolution studied with FLASH shows minor deviations from the analytical prediction. △ Less

Submitted 12 April, 2010; originally announced April 2010.

Comments: 16 pages, 17 figures

iVINE - Ionization in the parallel tree/SPH code VINE: First results on the observed age-spread around O-stars

Authors: M. Gritschneder, T. Naab, A. Burkert, S. Walch, F. Heitsch, M. Wetzstein

Abstract: We present a three-dimensional, fully parallelized, efficient implementation of ionizing UV radiation for smoothed particle hydrodynamics (SPH) including self-gravity. Our method is based on the SPH/tree code VINE. We therefore call it iVINE (for Ionization + VINE). This approach allows detailed high-resolution studies of the effects of ionizing radiation from e.g. young massive stars on their t… ▽ More We present a three-dimensional, fully parallelized, efficient implementation of ionizing UV radiation for smoothed particle hydrodynamics (SPH) including self-gravity. Our method is based on the SPH/tree code VINE. We therefore call it iVINE (for Ionization + VINE). This approach allows detailed high-resolution studies of the effects of ionizing radiation from e.g. young massive stars on their turbulent parental molecular clouds. In this paper we describe the concept and the numerical implementation of the radiative transfer for a plain-parallel geometry and we discuss several test cases demonstrating the efficiency and accuracy of the new method. As a first application, we study the radiatively driven implosion of marginally stable molecular clouds at various distances of a strong UV source and show that they are driven into gravitational collapse. The resulting cores are very compact and dense exactly as it is observed in clustered environments. Our simulations indicate that the time of triggered collapse depends on the distance of the core from the UV source. Clouds closer to the source collapse several $10^5$ years earlier than more distant clouds. This effect can explain the observed age spread in OB associations where stars closer to the source are found to be younger. We discuss possible uncertainties in the observational derivation of shock front velocities due to early stripping of proto-stellar envelopes by ionizing radiation. △ Less

Submitted 10 November, 2008; v1 submitted 5 September, 2008; originally announced September 2008.

Comments: 12 pages, 8 figures, accepted by MNRAS

VINE -- A numerical code for simulating astrophysical systems using particles II: Implementation and performance characteristics

Authors: Andrew F. Nelson, M. Wetzstein, T. Naab, .

Abstract: We continue our presentation of VINE. We begin with a description of relevant architectural properties of the serial and shared memory parallel computers on which VINE is intended to run, and describe their influences on the design of the code itself. We continue with a detailed description of a number of optimizations made to the layout of the particle data in memory and to our implementation o… ▽ More We continue our presentation of VINE. We begin with a description of relevant architectural properties of the serial and shared memory parallel computers on which VINE is intended to run, and describe their influences on the design of the code itself. We continue with a detailed description of a number of optimizations made to the layout of the particle data in memory and to our implementation of a binary tree used to access that data for use in gravitational force calculations and searches for SPH neighbor particles. We describe modifications to the code necessary to obtain forces efficiently from special purpose `GRAPE' hardware. We conclude with an extensive series of performance tests, which demonstrate that the code can be run efficiently and without modification in serial on small workstations or in parallel using OpenMP compiler directives on large scale, shared memory parallel machines. We analyze the effects of the code optimizations and estimate that they improve its overall performance by more than an order of magnitude over that obtained by many other tree codes. Scaled parallel performance of the gravity and SPH calculations, together the most costly components of most simulations, is nearly linear up to maximum machine sizes available to us (120 processors on an Origin~3000). At similar accuracy, performance of VINE, used in GRAPE-tree mode, is approximately a factor two slower than that of VINE, used in host-only mode. Optimizations of the GRAPE/host communications could improve the speed by as much as a factor of three, but have not yet been implemented in VINE. △ Less

Submitted 10 July, 2009; v1 submitted 28 February, 2008; originally announced February 2008.

Comments: Update to revised and newly resubmitted version of the paper. Code updated to version 1.0.7

Journal ref: Astrophys.J.Supp.184:326-360,2009

VINE -- A numerical code for simulating astrophysical systems using particles I: Description of the physics and the numerical methods

Authors: M. Wetzstein, Andrew F. Nelson, T. Naab, A. Burkert

Abstract: We present a Fortran 95 code for simulating the evolution of astrophysical systems using particles to represent the underlying fluid flow. The code is designed to be versatile, flexible and extensible, with modular options that can be selected either at compile time or at run time. We include a number of general purpose modules describing a variety of physical processes commonly required in the… ▽ More We present a Fortran 95 code for simulating the evolution of astrophysical systems using particles to represent the underlying fluid flow. The code is designed to be versatile, flexible and extensible, with modular options that can be selected either at compile time or at run time. We include a number of general purpose modules describing a variety of physical processes commonly required in the astrophysical community. The code can be used as an N-body code to evolve a set of particles in two or three dimensions using either a Leapfrog or Runge-Kutta-Fehlberg integrator, with or without individual timesteps for each particle. Particles may interact gravitationally as $N$-body particles, and all or any subset may also interact hydrodynamically, using the Smoothed Particle Hydrodynamic (SPH) method. Massive point particles (`stars') which may accrete nearby SPH or $N$-body particles may also be included. The default free boundary conditions can be replaced by a module to include periodic boundaries. Cosmological expansion may also be included. An interface with special purpose `GRAPE' hardware may also be selected. If available, forces obtained from the GRAPE coprocessors may be transparently substituted for those obtained from the default tree based calculation. The code may be run without modification on single processors or in parallel using OpenMP compiler directives on large scale, shared memory parallel machines. In comparison to the Gadget-2 code of Springel 2005, the gravitational force calculation is $\approx 3.5 - 4.8$ times faster with VINE when run on 8 Itanium~2 processors in an SGI Altix, while producing nearly identical outcomes in our test problems. We present simulations of several test problems, including a merger simulation of two elliptical galaxies with 800000 particles. △ Less

Submitted 10 July, 2009; v1 submitted 28 February, 2008; originally announced February 2008.

Comments: Update to revised and newly resubmitted paper version. Code updated to version 1.0.7

Journal ref: Astrophys.J.Supp.184:298-325,2009

Do dwarf galaxies form in tidal tails?

Authors: M. Wetzstein, T. Naab, A. Burkert

Abstract: The formation of tidal dwarf galaxies (TDG) inside tidal arms of interacting disk galaxies has been studied with N-body and N-body/SPH simulations at different resolutions. In pure N-body simulations no bound objects are formed at high resolution. At low resolution bound objects can form in tidal tails in agreement with previous work. We conclude that tidal dwarf galaxies are not likely to form… ▽ More The formation of tidal dwarf galaxies (TDG) inside tidal arms of interacting disk galaxies has been studied with N-body and N-body/SPH simulations at different resolutions. In pure N-body simulations no bound objects are formed at high resolution. At low resolution bound objects can form in tidal tails in agreement with previous work. We conclude that tidal dwarf galaxies are not likely to form by pure collisionless collapse in tidal tails. However, the presence of a sufficiently massive and extended gas component in the progenitor disk supports the formation of bound stellar objects in the tidal arms. Our results clearly favor a dissipation supported scenario in which the formation of TDGs is induced by the local collapse of gas which then triggers the collapse of the stellar component. △ Less

Submitted 1 December, 2006; v1 submitted 31 October, 2005; originally announced October 2005.

Comments: 18 pages, 16 figures, revised version, MNRAS accepted

Journal ref: Mon.Not.Roy.Astron.Soc.375:805-820,2007

Collisional Stellar Dynamics, Gas Dynamics and Special Purpose Computing

Authors: R. Spurzem, J. Makino, T. Fukushige, G. Lienhart, A. Kugel, R. Maenner, M. Wetzstein, A. Burkert, T. Naab

Abstract: Challenging stellar dynamical problems, such as the study of gravothermal oscillations in star clusters, have in the past initiated the very successful building of GRAPE special purpose computers. It is discussed, that present day tasks such as the formation and evolution of galactic nuclei with one or more massive black holes and the coupled stellar and gas dynamical processes in the formation… ▽ More Challenging stellar dynamical problems, such as the study of gravothermal oscillations in star clusters, have in the past initiated the very successful building of GRAPE special purpose computers. It is discussed, that present day tasks such as the formation and evolution of galactic nuclei with one or more massive black holes and the coupled stellar and gas dynamical processes in the formation of nuclei and star clusters, demand a new kind of hybrid architecture, using both GRAPE and a reconfigurable logics board called RACE. For such a system we have developed first implementations and floating point performance studies in the case of the SPH algorithm (smoothed particle hydrodynamics), which will be of great advantage for SPH modelling and also for direct $N$-body simulations using the more efficient Ahmad-Cohen neighbour schemes. △ Less

Submitted 18 April, 2002; originally announced April 2002.

Comments: 7 pages, 2 figures

Report number: Proceedings of International Symposium on Computational Science and Engineering 2002 (ISCSE'02), ed. A. Ukawa, published by JSPS (Japan Society for the Promotion of Science)