-
Demonstration of nuclear gamma-ray polarimetry based on a multi-layer CdTe Compton Camera
Authors:
S. Go,
Y. Tsuzuki,
H. Yoneda,
Y. Ichikawa,
T. Ikeda,
N. Imai,
K. Imamura,
M. Niikura,
D. Nishimura,
R. Mizuno,
S. Takeda,
H. Ueno,
S. Watanabe,
T. Y. Saito,
S. Shimoura,
S. Sugawara,
A. Takamine,
T. Takahashi
Abstract:
To detect and track structural changes in atomic nuclei, the systematic study of nuclear levels with firm spin-parity assignments is important. While linear polarization measurements have been applied to determine the electromagnetic character of gamma-ray transitions, the applicable range is strongly limited due to the low efficiency of the detection system. The multi-layer Cadmium-Telluride (CdT…
▽ More
To detect and track structural changes in atomic nuclei, the systematic study of nuclear levels with firm spin-parity assignments is important. While linear polarization measurements have been applied to determine the electromagnetic character of gamma-ray transitions, the applicable range is strongly limited due to the low efficiency of the detection system. The multi-layer Cadmium-Telluride (CdTe) Compton camera can be a state-of-the-art gamma-ray polarimeter for nuclear spectroscopy with the high position sensitivity and the detection efficiency. We demonstrated the capability to operate this detector as a reliable gamma-ray polarimeter by using polarized 847-keV gamma rays produced by the $^{56}\rm{Fe}({\it p},{\it p'}γ)$ reaction. By combining the experimental data and simulated calculations, the modulation curve for the gamma ray was successfully obtained. A remarkably high polarization sensitivity was achieved, compatible with a reasonable detection efficiency. Based on the obtained results, a possible future gamma-ray polarimetery is discussed.
△ Less
Submitted 14 February, 2024;
originally announced February 2024.
-
The 17 April 2021 widespread solar energetic particle event
Authors:
N. Dresing,
L. Rodríguez-García,
I. C. Jebaraj,
A. Warmuth,
S. Wallace,
L. Balmaceda,
T. Podladchikova,
R. D. Strauss,
A. Kouloumvakos,
C. Palmroos,
V. Krupar,
J. Gieseler,
Z. Xu,
J. G. Mitchell,
C. M. S. Cohen,
G. A. de Nolfo,
E. Palmerio,
F. Carcaboso,
E. K. J. Kilpua,
D. Trotta,
U. Auster,
E. Asvestari,
D. da Silva,
W. Dröge,
T. Getachew
, et al. (24 additional authors not shown)
Abstract:
Context. A solar eruption on 17 April 2021 produced a widespread Solar Energetic Particle (SEP) event that was observed by five longitudinally well-separated observers in the inner heliosphere at heliocentric distances of 0.42 to 1 au: BepiColombo, Parker Solar Probe, Solar Orbiter, STEREO A, and near-Earth spacecraft. The event produced relativistic electrons and protons. It was associated with a…
▽ More
Context. A solar eruption on 17 April 2021 produced a widespread Solar Energetic Particle (SEP) event that was observed by five longitudinally well-separated observers in the inner heliosphere at heliocentric distances of 0.42 to 1 au: BepiColombo, Parker Solar Probe, Solar Orbiter, STEREO A, and near-Earth spacecraft. The event produced relativistic electrons and protons. It was associated with a long-lasting solar hard X-ray flare and a medium fast Coronal Mass Ejection (CME) with a speed of 880 km/s driving a shock, an EUV wave as well as long-lasting radio burst activity showing four distinct type III burst. Methods. A multi-spacecraft analysis of remote-sensing and in-situ observations is applied to attribute the SEP observations at the different locations to the various potential source regions at the Sun. An ENLIL simulation is used to characterize the interplanetary state and its role for the energetic particle transport. The magnetic connection between each spacecraft and the Sun is determined. Based on a reconstruction of the coronal shock front we determine the times when the shock establishes magnetic connections with the different observers. Radio observations are used to characterize the directivity of the four main injection episodes, which are then employed in a 2D SEP transport simulation. Results. Timing analysis of the inferred SEP solar injection suggests different source processes being important for the electron and the proton event. Comparison among the characteristics and timing of the potential particle sources, such as the CME-driven shock or the flare, suggests a stronger shock contribution for the proton event and a more likely flare-related source of the electron event. Conclusions. We find that in this event an important ingredient for the wide SEP spread was the wide longitudinal range of about 110 degrees covered by distinct SEP injections.
△ Less
Submitted 20 March, 2023;
originally announced March 2023.
-
Collisions between sintered icy aggregates
Authors:
Sin-iti Sirono,
Haruta Ueno
Abstract:
Collisions between sintered icy dust aggregates are numerically simulated. If the temperature of an icy aggregate is sufficiently high, sintering promotes molecular transport and a neck between adjacent grains grows. This growth changes the mechanical responses of the neck. We included this effect to a simulation code, and conducted collisional simulations. For porous aggregates, the critical velo…
▽ More
Collisions between sintered icy dust aggregates are numerically simulated. If the temperature of an icy aggregate is sufficiently high, sintering promotes molecular transport and a neck between adjacent grains grows. This growth changes the mechanical responses of the neck. We included this effect to a simulation code, and conducted collisional simulations. For porous aggregates, the critical velocity for growth, below which the mass of an aggregate increases, decreased from 50\,m\,s$^{-1}$ for the non-sintered case to 20\,m\,s$^{-1}$. For compacted aggregates, the main collisional outcome is bouncing. These results come from the fact that the strength of the neck is increased by sintering. The numerical results suggest that the collisional growth of icy grain aggregates is strongly affected by sintering.
△ Less
Submitted 12 May, 2017;
originally announced May 2017.
-
Observations of Gamma-ray Bursts with ASTRO-H and Fermi
Authors:
M. Ohno,
T. Kawano,
M. S. Tashiro,
H. Ueno,
D. Yonetoku,
H. Sameshima,
T. Takahashi,
H. Seta,
R. Mushotzky,
K. Yamaoka,
ASTRO-H SWG team,
Fermi LAT/GBM collaborations
Abstract:
ASTRO-H, the sixth Japanese X-ray observatory, which is scheduled to be launched by the end of Japanese fiscal year 2015 has a capability to observe the prompt emission from Gamma-ray Bursts (GRBs) utilizing BGO active shields for the soft gamma-ray detector (SGD). The effective area of the SGD shield detectors is very large and its data acquisition system is optimized for short transients such as…
▽ More
ASTRO-H, the sixth Japanese X-ray observatory, which is scheduled to be launched by the end of Japanese fiscal year 2015 has a capability to observe the prompt emission from Gamma-ray Bursts (GRBs) utilizing BGO active shields for the soft gamma-ray detector (SGD). The effective area of the SGD shield detectors is very large and its data acquisition system is optimized for short transients such as short GRBs. Thus, we expect to perform more detailed time-resolved spectral analysis with a combination of ASTRO-H and Fermi LAT/GBM to investigate the gamma-ray emission mechanism of short GRBs. In addition, the environment of the GRB progenitor should be a remarkable objective from the point of view of the chemical evolution of high-z universe. If we can maneuver the spacecraft to the GRBs, we can perform a high-resolution spectroscopy of the X-ray afterglow of GRBs utilizing the onboard micro calorimeter and X-ray CCD camera.
△ Less
Submitted 3 March, 2015;
originally announced March 2015.
-
ASTRO-H White Paper - Chemical Evolution in High-z Universe
Authors:
M. S. Tashiro,
D. Yonetoku,
M. Ohno,
H. Sameshima,
H. Seta,
H. Ueno,
T. Nakagawa,
T. Tamura,
F. Paerels,
N. Kawai
Abstract:
In this paper, we demonstrate ASTRO-H's capability to measure the chemical evolution in the high-z (z <~ 3) universe by observing X-ray afterglows of gamma-ray bursts (GRBs) and distant Blazars. Utilizing these sources as background light sources, the excellent energy resolution of ASTRO-H/SXS allows us to detect emission and absorption features from heavy elements in the circumstellar material in…
▽ More
In this paper, we demonstrate ASTRO-H's capability to measure the chemical evolution in the high-z (z <~ 3) universe by observing X-ray afterglows of gamma-ray bursts (GRBs) and distant Blazars. Utilizing these sources as background light sources, the excellent energy resolution of ASTRO-H/SXS allows us to detect emission and absorption features from heavy elements in the circumstellar material in the host galaxies, from the intergalactic medium (IGM) and in the ejecta of GRB explosions. In particular, we can constrain the existence of the warm-hot intergalactic material (WHIM), thought to contain most of the baryons at redshift of z < ~3, with a typical exposure of one day for a follow-up observation of a GRB afterglow or 300 ks exposure for several distant Blazars. In addition to the chemical evolution study, the combination of the SGD, HXI, SXI and SXS will measure, for the first time, the temporal behavior of the spectral continuum of GRB afterglows and Blazars over a broad energy range and short time scales allowing detailed modeling of jets. The ability to obtain these data from GRB afterglows will depend critically on the availability of GRB triggers and the capability of ASTRO-H to respond rapidly to targets of opportunity. At the present time it seems as if Swift will still be functioning normally during the first two years of ASTRO-H operations providing the needed triggering capability.
△ Less
Submitted 2 December, 2014;
originally announced December 2014.
-
The Cherenkov Telescope Array Large Size Telescope
Authors:
G. Ambrosi,
Y. Awane,
H. Baba,
A. Bamba,
M. Barceló,
U. Barres de Almeida,
J. A. Barrio,
O. Blanch Bigas,
J. Boix,
L. Brunetti,
E. Carmona,
E. Chabanne,
M. Chikawa,
P. Colin,
J. L. Conteras,
J. Cortina,
F. Dazzi,
A. Deangelis,
G. Deleglise,
C. Delgado,
C. Díaz,
F. Dubois,
A. Fiasson,
D. Fink,
N. Fouque
, et al. (107 additional authors not shown)
Abstract:
The two arrays of the Very High Energy gamma-ray observatory Cherenkov Telescope Array (CTA) will include four Large Size Telescopes (LSTs) each with a 23 m diameter dish and 28 m focal distance. These telescopes will enable CTA to achieve a low-energy threshold of 20 GeV, which is critical for important studies in astrophysics, astroparticle physics and cosmology. This work presents the key speci…
▽ More
The two arrays of the Very High Energy gamma-ray observatory Cherenkov Telescope Array (CTA) will include four Large Size Telescopes (LSTs) each with a 23 m diameter dish and 28 m focal distance. These telescopes will enable CTA to achieve a low-energy threshold of 20 GeV, which is critical for important studies in astrophysics, astroparticle physics and cosmology. This work presents the key specifications and performance of the current LST design in the light of the CTA scientific objectives.
△ Less
Submitted 17 July, 2013;
originally announced July 2013.
-
Development of the Photomultiplier-Tube Readout System for the CTA Large Size Telescope
Authors:
H. Kubo,
R. Paoletti,
Y. Awane,
A. Bamba,
M. Barcelo,
J. A. Barrio,
O. Blanch,
J. Boix,
C. Delgado,
D. Fink,
D. Gascon,
S. Gunji,
R. Hagiwara,
Y. Hanabata,
K. Hatanaka,
M. Hayashida,
M. Ikeno,
S. Kabuki,
H. Katagiri,
J. Kataoka,
Y. Konno,
S. Koyama,
T. Kishimoto,
J. Kushida,
G. Martinez
, et al. (29 additional authors not shown)
Abstract:
We have developed a prototype of the photomultiplier tube (PMT) readout system for the Cherenkov Telescope Array (CTA) Large Size Telescope (LST). Two thousand PMTs along with their readout systems are arranged on the focal plane of each telescope, with one readout system per 7-PMT cluster. The Cherenkov light pulses generated by the air showers are detected by the PMTs and amplified in a compact,…
▽ More
We have developed a prototype of the photomultiplier tube (PMT) readout system for the Cherenkov Telescope Array (CTA) Large Size Telescope (LST). Two thousand PMTs along with their readout systems are arranged on the focal plane of each telescope, with one readout system per 7-PMT cluster. The Cherenkov light pulses generated by the air showers are detected by the PMTs and amplified in a compact, low noise and wide dynamic range gain block. The output of this block is then digitized at a sampling rate of the order of GHz using the Domino Ring Sampler DRS4, an analog memory ASIC developed at Paul Scherrer Institute. The sampler has 1,024 capacitors per channel and four channels are cascaded for increased depth. After a trigger is generated in the system, the charges stored in the capacitors are digitized by an external slow sampling ADC and then transmitted via Gigabit Ethernet. An onboard FPGA controls the DRS4, trigger threshold, and Ethernet transfer. In addition, the control and monitoring of the Cockcroft-Walton circuit that provides high voltage for the 7-PMT cluster are performed by the same FPGA. A prototype named Dragon has been developed that has successfully sampled PMT signals at a rate of 2 GHz, and generated single photoelectron spectra.
△ Less
Submitted 12 July, 2013;
originally announced July 2013.
-
CTA contributions to the 33rd International Cosmic Ray Conference (ICRC2013)
Authors:
The CTA Consortium,
:,
O. Abril,
B. S. Acharya,
M. Actis,
G. Agnetta,
J. A. Aguilar,
F. Aharonian,
M. Ajello,
A. Akhperjanian,
M. Alcubierre,
J. Aleksic,
R. Alfaro,
E. Aliu,
A. J. Allafort,
D. Allan,
I. Allekotte,
R. Aloisio,
E. Amato,
G. Ambrosi,
M. Ambrosio,
J. Anderson,
E. O. Angüner,
L. A. Antonelli,
V. Antonuccio
, et al. (1082 additional authors not shown)
Abstract:
Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil
Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil
△ Less
Submitted 29 July, 2013; v1 submitted 8 July, 2013;
originally announced July 2013.
