-
Radio emission from airplanes as observed with RNO-G
Authors:
RNO-G Collaboration,
:,
S. Agarwal,
J. A. Aguilar,
N. Alden,
S. Ali,
P. Allison,
M. Betts,
D. Besson,
A. Bishop,
O. Botner,
S. Bouma,
S. Buitink,
R. Camphyn,
J. Chan,
S. Chiche,
B. A. Clark,
A. Coleman,
K. Couberly,
S. de Kockere,
K. D. de Vries,
C. Deaconu,
P. Giri,
C. Glaser,
T. Glüsenkamp
, et al. (58 additional authors not shown)
Abstract:
This paper describes how intentional and unintentional radio emission from airplanes is recorded with the Radio Neutrino Observatory Greenland (RNO-G). We characterize the received signals and define a procedure to extract a clean set of impulsive signals. These signals are highly suitable for instrument calibration, also for future experiments. A set of signals is used to probe the timing precisi…
▽ More
This paper describes how intentional and unintentional radio emission from airplanes is recorded with the Radio Neutrino Observatory Greenland (RNO-G). We characterize the received signals and define a procedure to extract a clean set of impulsive signals. These signals are highly suitable for instrument calibration, also for future experiments. A set of signals is used to probe the timing precision of RNO-G in-situ, which is found to match expectations. We also discuss the impact of these signals on the ability to detect neutrinos with RNO-G.
△ Less
Submitted 20 June, 2025;
originally announced June 2025.
-
Probing the Firn Refractive Index Profile and Borehole Closure Using Antenna Response
Authors:
S. Agarwal,
J. A. Aguilar,
N. Alden,
S. Ali,
P. Allison,
M. Betts,
D. Besson,
A. Bishop,
O. Botner,
S. Bouma,
S. Buitink,
R. Camphyn,
S. Chiche,
B. A. Clark,
A. Coleman,
K. Couberly,
S. de Kockere,
K. D. de Vries,
C. Deaconu,
P. Giri,
C. Glaser,
T. Glusenkamp,
A. Hallgren,
S. Hallmann,
J. C. Hanson
, et al. (48 additional authors not shown)
Abstract:
We present a methodology for extracting firn ice properties using S-parameter reflection coefficients (`$S_{11}$') of antennas lowered into boreholes. Coupled with Finite-Difference Time Domain (FDTD) simulations and calculations, a depth-dependent $S_{11}$ profile can be translated into a refractive index profile. Since the response of an antenna deployed into a dry borehole depends on the diamet…
▽ More
We present a methodology for extracting firn ice properties using S-parameter reflection coefficients (`$S_{11}$') of antennas lowered into boreholes. Coupled with Finite-Difference Time Domain (FDTD) simulations and calculations, a depth-dependent $S_{11}$ profile can be translated into a refractive index profile. Since the response of an antenna deployed into a dry borehole depends on the diameter of the hole, multi-year $S_{11}$ measurements also permit an estimate of borehole closure complementary to estimates based on calipers or other dedicated mechanical loggers. We present first results, based on data taken in August, 2024 from boreholes at Summit Station, Greenland. We estimate borehole closure resolution of $\mathbf{\sim 2}$mm and also derive an index of refraction profile consistent with previous measurements.
△ Less
Submitted 4 April, 2025;
originally announced April 2025.
-
Instrument design and performance of the first seven stations of RNO-G
Authors:
S. Agarwal,
J. A. Aguilar,
N. Alden,
S. Ali,
P. Allison,
M. Betts,
D. Besson,
A. Bishop,
O. Botner,
S. Bouma,
S. Buitink,
R. Camphyn,
M. Cataldo,
S. Chiche,
B. A. Clark,
A. Coleman,
K. Couberly,
S. de Kockere,
K. D. de Vries,
C. Deaconu,
C. Glaser,
T. Glüsenkamp,
A. Hallgren,
S. Hallmann,
J. C. Hanson
, et al. (56 additional authors not shown)
Abstract:
The Radio Neutrino Observatory in Greenland (RNO-G) is the first in-ice radio array in the northern hemisphere for the detection of ultra-high energy neutrinos via the coherent radio emission from neutrino-induced particle cascades within the ice. The array is currently in phased construction near Summit Station on the Greenland ice sheet, with 7~stations deployed during the first two boreal summe…
▽ More
The Radio Neutrino Observatory in Greenland (RNO-G) is the first in-ice radio array in the northern hemisphere for the detection of ultra-high energy neutrinos via the coherent radio emission from neutrino-induced particle cascades within the ice. The array is currently in phased construction near Summit Station on the Greenland ice sheet, with 7~stations deployed during the first two boreal summer field seasons of 2021 and 2022. In this paper, we describe the installation and system design of these initial RNO-G stations, and discuss the performance of the array as of summer 2024.
△ Less
Submitted 11 February, 2025; v1 submitted 19 November, 2024;
originally announced November 2024.
-
Line Emission Mapper (LEM): Probing the physics of cosmic ecosystems
Authors:
Ralph Kraft,
Maxim Markevitch,
Caroline Kilbourne,
Joseph S. Adams,
Hiroki Akamatsu,
Mohammadreza Ayromlou,
Simon R. Bandler,
Marco Barbera,
Douglas A. Bennett,
Anil Bhardwaj,
Veronica Biffi,
Dennis Bodewits,
Akos Bogdan,
Massimiliano Bonamente,
Stefano Borgani,
Graziella Branduardi-Raymont,
Joel N. Bregman,
Joseph N. Burchett,
Jenna Cann,
Jenny Carter,
Priyanka Chakraborty,
Eugene Churazov,
Robert A. Crain,
Renata Cumbee,
Romeel Dave
, et al. (85 additional authors not shown)
Abstract:
The Line Emission Mapper (LEM) is an X-ray Probe for the 2030s that will answer the outstanding questions of the Universe's structure formation. It will also provide transformative new observing capabilities for every area of astrophysics, and to heliophysics and planetary physics as well. LEM's main goal is a comprehensive look at the physics of galaxy formation, including stellar and black-hole…
▽ More
The Line Emission Mapper (LEM) is an X-ray Probe for the 2030s that will answer the outstanding questions of the Universe's structure formation. It will also provide transformative new observing capabilities for every area of astrophysics, and to heliophysics and planetary physics as well. LEM's main goal is a comprehensive look at the physics of galaxy formation, including stellar and black-hole feedback and flows of baryonic matter into and out of galaxies. These processes are best studied in X-rays, and emission-line mapping is the pressing need in this area. LEM will use a large microcalorimeter array/IFU, covering a 30x30' field with 10" angular resolution, to map the soft X-ray line emission from objects that constitute galactic ecosystems. These include supernova remnants, star-forming regions, superbubbles, galactic outflows (such as the Fermi/eROSITA bubbles in the Milky Way and their analogs in other galaxies), the Circumgalactic Medium in the Milky Way and other galaxies, and the Intergalactic Medium at the outskirts and beyond the confines of galaxies and clusters. LEM's 1-2 eV spectral resolution in the 0.2-2 keV band will make it possible to disentangle the faintest emission lines in those objects from the bright Milky Way foreground, providing groundbreaking measurements of the physics of these plasmas, from temperatures, densities, chemical composition to gas dynamics. While LEM's main focus is on galaxy formation, it will provide transformative capability for all classes of astrophysical objects, from the Earth's magnetosphere, planets and comets to the interstellar medium and X-ray binaries in nearby galaxies, AGN, and cooling gas in galaxy clusters. In addition to pointed observations, LEM will perform a shallow all-sky survey that will dramatically expand the discovery space.
△ Less
Submitted 12 April, 2023; v1 submitted 17 November, 2022;
originally announced November 2022.
-
A Primer for Telemetry Interfacing in Accordance with NASA Standards Using Low Cost FPGAs
Authors:
Jake A. McCoy,
Ted B. Schultz,
James H. Tutt,
Thomas Rogers,
Drew M. Miles,
Randall L. McEntaffer
Abstract:
Photon counting detector systems on sounding rocket payloads often require interfacing asynchronous outputs with a synchronously clocked telemetry (TM) stream. Though this can be handled with an on-board computer, there are several low cost alternatives including custom hardware, microcontrollers and field-programmable gate arrays (FPGAs). This paper outlines how a TM interface (TMIF) for detector…
▽ More
Photon counting detector systems on sounding rocket payloads often require interfacing asynchronous outputs with a synchronously clocked telemetry (TM) stream. Though this can be handled with an on-board computer, there are several low cost alternatives including custom hardware, microcontrollers and field-programmable gate arrays (FPGAs). This paper outlines how a TM interface (TMIF) for detectors on a sounding rocket with asynchronous parallel digital output can be implemented using low cost FPGAs and minimal custom hardware. Low power consumption and high speed FPGAs are available as commercial off-the-shelf (COTS) products and can be used to develop the main component of the TMIF. Then, only a small amount of additional hardware is required for signal buffering and level translating. This paper also discusses how this system can be tested with a simulated TM chain in the small laboratory setting using FPGAs and COTS specialized data acquisition products.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
A Comprehensive Line-Spread Function Error Budget for the Off-Plane Grating Rocket Experiment
Authors:
Benjamin D. Donovan,
Randall L. McEntaffer,
James H. Tutt,
Bridget C. O'Meara,
Fabien Grisé,
William W. Zhang,
Michael P. Biskach,
Timo T. Saha,
Andrew D. Holland,
Daniel Evan,
Matthew R. Lewis,
Matthew R. Soman,
Karen Holland,
David Colebrook,
Fraser Cooper,
David Farn
Abstract:
The Off-plane Grating Rocket Experiment (OGRE) is a soft X-ray grating spectrometer to be flown on a suborbital rocket. The payload is designed to obtain the highest-resolution soft X-ray spectrum of Capella to date with a resolution goal of $R(λ/Δλ)>2000$ at select wavelengths in its 10--55 Angstrom bandpass of interest. The optical design of the spectrometer realizes a theoretical maximum resolu…
▽ More
The Off-plane Grating Rocket Experiment (OGRE) is a soft X-ray grating spectrometer to be flown on a suborbital rocket. The payload is designed to obtain the highest-resolution soft X-ray spectrum of Capella to date with a resolution goal of $R(λ/Δλ)>2000$ at select wavelengths in its 10--55 Angstrom bandpass of interest. The optical design of the spectrometer realizes a theoretical maximum resolution of $R\approx5000$, but this performance does not consider the finite performance of the individual spectrometer components, misalignments between components, and in-flight pointing errors. These errors all degrade the performance of the spectrometer from its theoretical maximum. A comprehensive line-spread function (LSF) error budget has been constructed for the OGRE spectrometer to identify contributions to the LSF, to determine how each of these affects the LSF, and to inform performance requirements and alignment tolerances for the spectrometer. In this document, the comprehensive LSF error budget for the OGRE spectrometer is presented, the resulting errors are validated via raytrace simulations, and the implications of these results are discussed.
△ Less
Submitted 5 January, 2021;
originally announced January 2021.
-
REX: X-ray experiment on the Water Recovery Rocket
Authors:
Martin Urban,
Ondrej Nentvich,
Tomas Baca,
Ivo Vertat,
Veronika Marsikova,
Daniela Doubravova,
Vladimir Daniel,
Adolf Inneman,
Ladisla Pina,
Randall L. McEntaffer,
Ted B. Schultz,
Drew M. Miles,
James H. Tutt
Abstract:
This paper presents Rocket Experiment (REX) that was part of a dual payload rocket campaign for NASA's sounding rocket Black Brant IX with water recovery technology. This mission was a suborbital sounding rocket flight that was launched and recovered on April 4, 2018 and targeted the Vela supernova remnant. The purpose of REX was to classify the Technology Readiness Level of onboard devices design…
▽ More
This paper presents Rocket Experiment (REX) that was part of a dual payload rocket campaign for NASA's sounding rocket Black Brant IX with water recovery technology. This mission was a suborbital sounding rocket flight that was launched and recovered on April 4, 2018 and targeted the Vela supernova remnant. The purpose of REX was to classify the Technology Readiness Level of onboard devices designed for space applications. The devices were two wide-field X-ray telescopes consisting of a combination of Lobster-Eye (LE) optics with an uncooled Timepix detector (256 x 256 px @ 55 um), and additional sensors. The first telescope uses a two-dimensional combination of LE modules with a focal length of 1 m and a Field of View (FOV) of 1.0 x 1.2 deg and operates in the energy range of 3 - 60 keV. The second telescope was a one-dimensional LE with a focal length of 250 mm and a FOV of 2.7 x 8.0 deg for the energy range 3 - 40 keV. The X-ray telescopes were supplemented by a camera in the visible spectrum with 1,280 x 1,024 px resolution, which was used to obtain images of the observed sources and to verify the resulting pointing of the rocket carrier. Other devices also include infrared array sensors and inertial measurement units tested for future small satellite missions. The data handler and communication system were built using the Robot Operating System, and both the system and the electronics were deployed and operated in flight. The hardware was successfully recovered after the launch and the data were extracted.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.
-
Performance Testing of a Large-Format Reflection Grating Prototype for a Suborbital Rocket Payload
Authors:
Benjamin D. Donovan,
Randall L. McEntaffer,
Casey T. DeRoo,
James H. Tutt,
Fabien Grisé,
Chad M. Eichfel,
Oren Z. Gall,
Vadim Burwitz,
Gisela Hartner,
Carlo Pelliciari,
Marlis-Madeleine La Caria
Abstract:
The soft X-ray grating spectrometer on board the Off-plane Grating Rocket Experiment (OGRE) hopes to achieve the highest resolution soft X-ray spectrum of an astrophysical object when it is launched via suborbital rocket. Paramount to the success of the spectrometer are the performance of the $>250$ reflection gratings populating its reflection grating assembly. To test current grating fabrication…
▽ More
The soft X-ray grating spectrometer on board the Off-plane Grating Rocket Experiment (OGRE) hopes to achieve the highest resolution soft X-ray spectrum of an astrophysical object when it is launched via suborbital rocket. Paramount to the success of the spectrometer are the performance of the $>250$ reflection gratings populating its reflection grating assembly. To test current grating fabrication capabilities, a grating prototype for the payload was fabricated via electron-beam lithography at The Pennsylvania State University's Materials Research Institute and was subsequently tested for performance at Max Planck Institute for Extraterrestrial Physics' PANTER X-ray Test Facility. Bayesian modeling of the resulting data via Markov chain Monte Carlo (MCMC) sampling indicated that the grating achieved the OGRE single-grating resolution requirement of $R_{g}(λ/Δλ)>4500$ at the 94% confidence level. The resulting $R_g$ posterior probability distribution suggests that this confidence level is likely a conservative estimate though, since only a finite $R_g$ parameter space was sampled and the model could not constrain the upper bound of $R_g$ to less than infinity. Raytrace simulations of the system found that the observed data can be reproduced with a grating performing at $R_g=\infty$. It is therefore postulated that the behavior of the obtained $R_g$ posterior probability distribution can be explained by a finite measurement limit of the system and not a finite limit on $R_g$. Implications of these results and improvements to the test setup are discussed.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
Line Spread Functions of Blazed Off-Plane Gratings Operated in the Littrow Mounting
Authors:
Casey T. DeRoo,
Randall L. McEntaffer,
Drew M. Miles,
Thomas J. Peterson,
Hannah Marlowe,
James H. Tutt,
Benjamin D. Donovan,
Benedikt Menz,
Vadim Burwitz,
Gisela Hartner,
Ryan Allured,
Randall K. Smith,
Ramses Gunther,
Alex Yanson,
Giuseppe Vacanti,
Marcelo Ackermann
Abstract:
Future soft X-ray (10 - 50 Angstrom) spectroscopy missions require higher effective areas and resolutions to perform critical science that cannot be done by instruments on current missions. An X-ray grating spectrometer employing off-plane reflection gratings would be capable of meeting these performance criteria. Off-plane gratings with blazed groove facets operated in the Littrow mounting can be…
▽ More
Future soft X-ray (10 - 50 Angstrom) spectroscopy missions require higher effective areas and resolutions to perform critical science that cannot be done by instruments on current missions. An X-ray grating spectrometer employing off-plane reflection gratings would be capable of meeting these performance criteria. Off-plane gratings with blazed groove facets operated in the Littrow mounting can be used to achieve excellent throughput into orders achieving high resolutions. We have fabricated two off-plane gratings with blazed groove profiles via a technique which uses commonly available microfabrication processes, is easily scaled for mass production, and yields gratings customized for a given mission architecture. Both fabricated gratings were tested in the Littrow mounting at the Max-Planck-Institute for extraterrestrial Physics PANTER X-ray test facility to assess their performance. The line spread functions of diffracted orders were measured, and a maximum resolution of 800 $\pm$ 20 is reported. In addition, we also observe evidence of a `blaze' effect from measurements of relative efficiencies of the diffracted orders.
△ Less
Submitted 15 March, 2016;
originally announced March 2016.
-
Performance Testing of a Novel Off-plane Reflection Grating and Silicon Pore Optic Spectrograph at PANTER
Authors:
Hannah Marlowe,
Randall L. McEntaffer,
Ryan Allured,
Casey DeRoo,
Drew M. Miles,
Benjamin D. Donovan,
James H. Tutt,
Vadim Burwitz,
Benedikt Menz,
Gisela D. Hartner,
Randall K. Smith,
Ramses Günther,
Alex Yanson,
Giuseppe Vacanti,
Marcelo Ackermann
Abstract:
An X-ray spectrograph consisting of radially ruled off-plane reflection gratings and silicon pore optics was tested at the Max Planck Institute for extraterrestrial Physics PANTER X-ray test facility. The silicon pore optic (SPO) stack used is a test module for the Arcus small explorer mission, which will also feature aligned off-plane reflection gratings. This test is the first time two off-plane…
▽ More
An X-ray spectrograph consisting of radially ruled off-plane reflection gratings and silicon pore optics was tested at the Max Planck Institute for extraterrestrial Physics PANTER X-ray test facility. The silicon pore optic (SPO) stack used is a test module for the Arcus small explorer mission, which will also feature aligned off-plane reflection gratings. This test is the first time two off-plane gratings were actively aligned to each other and with a SPO to produce an overlapped spectrum. The gratings were aligned using an active alignment module which allows for the independent manipulation of subsequent gratings to a reference grating in three degrees of freedom using picomotor actuators which are controllable external to the test chamber. We report the line spread functions of the spectrograph and the actively aligned gratings, and plans for future development.
△ Less
Submitted 19 March, 2015;
originally announced March 2015.
-
First results from a next-generation off-plane X-ray diffraction grating
Authors:
Randall McEntaffer,
Casey DeRoo,
Ted Schultz,
Brennan Gantner,
James Tutt,
Andrew Holland,
Stephen O'Dell,
Jessica Gaskin,
Jeffrey Kolodziejczak,
William W. Zhang,
Kai-Wing Chan,
Michael Biskach,
Ryan McClelland,
Dmitri Iazikov,
Xinpeng Wang,
Larry Koecher
Abstract:
Future NASA X-ray spectroscopy missions will require high throughput, high resolution grating spectrometers. Off-plane reflection gratings are capable of meeting the performance requirements needed to realize the scientific goals of these missions. We have identified a novel grating fabrication method that utilizes common lithographic and microfabrication techniques to produce the high fidelity gr…
▽ More
Future NASA X-ray spectroscopy missions will require high throughput, high resolution grating spectrometers. Off-plane reflection gratings are capable of meeting the performance requirements needed to realize the scientific goals of these missions. We have identified a novel grating fabrication method that utilizes common lithographic and microfabrication techniques to produce the high fidelity groove profile necessary to achieve this performance. Application of this process has produced an initial pre-master that exhibits a radial (variable line spacing along the groove dimension), high density (>6000 grooves/mm), laminar profile. This pre-master has been tested for diffraction efficiency at the BESSY II synchrotron light facility and diffracts up to 55% of incident light into usable spectral orders. Furthermore, tests of spectral resolving power show that these gratings are capable of obtaining resolutions well above 1300 ($λ/Δλ$) with limitations due to the test apparatus, not the gratings. Obtaining these results has provided confidence that this fabrication process is capable of producing off-plane reflection gratings for the next generation of X-ray observatories.
△ Less
Submitted 23 January, 2013;
originally announced January 2013.
