Showing 1–20 of 20 results for author: Spinelli, S

QUBIC IV: Performance of TES Bolometers and Readout Electronics

Authors: M. Piat, G. Stankowiak, E. S. Battistelli, P. de Bernardis, G. D Alessandro, M. De Petris, L. Grandsire, J. -Ch. Hamilton, T. D. Hoang, S. Marnieros, S. Masi, A. Mennella, L. Mousset, C. O Sullivan, D. Prele, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade, J. G. Alberro, A. Almela, G. Amico, L. H. Arnaldi , et al. (104 additional authors not shown)

Abstract: A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are… ▽ More A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are controlled and amplified by an SiGe application specific integrated circuit at 40 K. We report the performance of this readout chain and the characterization of the TES. The readout system has been functionally tested and characterized in the lab and in QUBIC. The low noise amplifier demonstrated a white noise level of 0.3 nV.Hz^-0.5. Characterizations of the QUBIC detectors and readout electronics includes the measurement of I-V curves, time constant and the noise equivalent power. The QUBIC TES bolometer array has approximately 80% detectors within operational parameters. It demonstrated a thermal decoupling compatible with a phonon noise of about 5.10^-17 W.Hz^-0.5 at 410 mK critical temperature. While still limited by microphonics from the pulse tubes and noise aliasing from readout system, the instrument noise equivalent power is about 2.10^-16 W.Hz^-0.5, enough for the demonstration of bolometric interferometry. △ Less

Submitted 20 October, 2021; v1 submitted 17 January, 2021; originally announced January 2021.

Comments: Accepted for publication in JCAP

QUBIC I: Overview and ScienceProgram

Authors: J. -Ch. Hamilton, L. Mousset, E. S. Battistelli, M. -A. Bigot-Sazy, P. Chanial, R. Charlassier, G. D'Alessandro, P. de Bernardis, M. De Petris, M. M. Gamboa Lerena, L. Grandsire, S. Lau, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, M. Piat, G. Riccardi, C. Scóccola, M. Stolpovskiy, A. Tartari, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade , et al. (105 additional authors not shown)

Abstract: The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical fo… ▽ More The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematic effects with those of bolometric detectors in terms of wide-band, background-limited sensitivity. The QUBIC synthesized beam has a frequency-dependent shape that results in the ability to produce maps of the CMB polarization in multiple sub-bands within the two physical bands of the instrument (150 and 220 GHz). These features make QUBIC complementary to other instruments and makes it particularly well suited to characterize and remove Galactic foreground contamination. In this article, first of a series of eight, we give an overview of the QUBIC instrument design, the main results of the calibration campaign, and present the scientific program of QUBIC including not only the measurement of primordial B-modes, but also the measurement of Galactic foregrounds. We give forecasts for typical observations and measurements: with three years of integration on the sky and assuming perfect foreground removal as well as stable atmospheric conditions from our site in Argentina, our simulations show that we can achieve a statistical sensitivity to the effective tensor-to-scalar ratio (including primordial and foreground B-modes) $σ(r)=0.015$. △ Less

Submitted 26 August, 2021; v1 submitted 4 November, 2020; originally announced November 2020.

Comments: 34 pages, 16 figures, accepted for publication by JCAP. Overview paper for a series of 8 QUBIC articles special JCAP edition dedicated to QUBIC

QUBIC II: Spectro-Polarimetry with Bolometric Interferometry

Authors: L. Mousset, M. M. Gamboa Lerena, E. S. Battistelli, P. de Bernardis, P. Chanial, G. D'Alessandro, G. Dashyan, M. De Petris, L. Grandsire, J. -Ch. Hamilton, F. Incardona, S. Landau, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, M. Piat, G. Ricciardi, C. G. Scóccola, M. Stolpovskiy, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni , et al. (106 additional authors not shown)

Abstract: Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foreg… ▽ More Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foregrounds. In this paper, the methodology is illustrated with examples based on the Q \& U Bolometric Interferometer for Cosmology (QUBIC) which is a ground-based instrument designed to measure the B-mode polarization of the sky at millimeter wavelengths. We consider the specific cases of point source reconstruction and Galactic dust mapping and we characterize the point spread function as a function of frequency. We study the noise properties of spectral imaging, especially the correlations between sub-bands, using end-to-end simulations together with a fast noise simulator. We conclude showing that spectral imaging performance are nearly optimal up to five sub-bands in the case of QUBIC. △ Less

Submitted 28 March, 2022; v1 submitted 28 October, 2020; originally announced October 2020.

Comments: 27 pages, 18 figures. Accepted by JCAP on July 6, 2021. Second paper of series of 8 in a special JCAP edition on QUBIC

QUBIC VII: The feedhorn-switch system of the technological demonstrator

Authors: F. Cavaliere, A. Mennella, M. Zannoni, P. Battaglia, E. S. Battistelli, D. Burke, G. D'Alessandro, P. de Bernardis, M. De Petris, C. Franceschet, L. Grandsire, J. -Ch. Hamilton, B. Maffei, E. Manzan, S. Marnieros, S. Masi, C. O'Sullivan, A. Passerini, F. Pezzotta, M. Piat, A. Tartari, S. A. Torchinsky, D. Viganò, F. Voisin, P. Ade , et al. (106 additional authors not shown)

Abstract: We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration… ▽ More We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration. We manufactured the horns in aluminum platelets milled by photo-chemical etching and mechanically tightened with screws. The switches are based on steel blades that open and close the wave-guide between the back-to-back horns and are operated by miniaturized electromagnets. We also show the current development status of the feedhorn-switch system for the QUBIC full instrument, based on an array of 400 horn-switch assemblies. △ Less

Submitted 1 April, 2022; v1 submitted 28 August, 2020; originally announced August 2020.

Comments: 30 pages, 28 figures. Accepted for submission to JCAP

QUBIC VI: cryogenic half wave plate rotator, design and performances

Authors: G. D'Alessandro, L. Mele, F. Columbro, G. Amico, E. S. Battistelli, P. de Bernardis, A. Coppolecchia, M. De Petris, L. Grandsire, J. -Ch. Hamilton, L. Lamagna, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, A. Paiella, F. Piacentini, M. Piat, G. Pisano, G. Presta, A. Tartari, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade , et al. (104 additional authors not shown)

Abstract: Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used t… ▽ More Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used technique is the Stokes Polarimetry that uses a rotating half-wave plate (HWP) and a linear polarizer to separate and modulate the polarization components with low residual cross-polarization. This paper describes the QUBIC Stokes Polarimeter highlighting its design features and its performances. A common systematic with these devices is the generation of large spurious signals synchronous with the rotation and proportional to the emissivity of the optical elements. A key feature of the QUBIC Stokes Polarimeter is to operate at cryogenic temperature in order to minimize this unwanted component. Moving efficiently this large optical element at low temperature constitutes a big engineering challenge in order to reduce friction power dissipation. Big attention has been given during the designing phase to minimize the differential thermal contractions between parts. The rotation is driven by a stepper motor placed outside the cryostat to avoid thermal load dissipation at cryogenic temperature. The tests and the results presented in this work show that the QUBIC polarimeter can easily achieve a precision below 0.1° in positioning simply using the stepper motor precision and the optical absolute encoder. The rotation induces only few mK of extra power load on the second cryogenic stage (~ 8 K). △ Less

Submitted 19 November, 2020; v1 submitted 24 August, 2020; originally announced August 2020.

Comments: Part of a series of 8 papers on QUBIC to be submitted to a special issue of JCAP

QUBIC V: Cryogenic system design and performance

Authors: S. Masi, E. S. Battistelli, P. de Bernardis, C. Chapron, F. Columbro, G. D'Alessandro, M. De Petris, L. Grandsire, J. -Ch. Hamilton, S. Marnieros, L. Mele, A. May, A. Mennella, C. O'Sullivan, A. Paiella, F. Piacentini, M. Piat, L. Piccirillo, G. Presta, A. Schillaci, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni , et al. (104 additional authors not shown)

Abstract: Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the mapping speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interfe… ▽ More Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the mapping speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interferometer for Cosmology) experiment: we describe its design, fabrication, experimental optimization and validation in the Technological Demonstrator configuration. The QUBIC cryogenic system is based on a large volume cryostat, using two pulse-tube refrigerators to cool at ~3K a large (~1 m^3) volume, heavy (~165kg) instrument, including the cryogenic polarization modulator, the corrugated feedhorns array, and the lower temperature stages; a 4He evaporator cooling at ~1K the interferometer beam combiner; a 3He evaporator cooling at ~0.3K the focal-plane detector arrays. The cryogenic system has been tested and validated for more than 6 months of continuous operation. The detector arrays have reached a stable operating temperature of 0.33K, while the polarization modulator has been operated from a ~10K base temperature. The system has been tilted to cover the boresight elevation range 20 deg -90 deg without significant temperature variations. The instrument is now ready for deployment to the high Argentinean Andes. △ Less

Submitted 25 August, 2021; v1 submitted 24 August, 2020; originally announced August 2020.

Comments: This is one of a series of papers on the QUBIC experiment status - This version of the paper matches the one accepted for publication on Journal of Cosmology and Astroparticle Physics

QUBIC VIII: Optical design and performance

Authors: C. O'Sullivan, M. De Petris, G. Amico, E. S. Battistelli, D. Burke, D. Buzi, C. Chapron, L. Conversi, G. D'Alessandro, P. de Bernardis, M. De Leo, D. Gayer, L. Grandsire, J. -Ch. Hamilton, S. Marnieros, S. Masi, A. Mattei, A. Mennella, L. Mousset, J. D. Murphy, A. Pelosi, M. Perciballi, M. Piat, S. Scully, A. Tartari , et al. (104 additional authors not shown)

Abstract: The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or p… ▽ More The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or planned experiments using the novel technique of bolometric interferometry. This technique takes advantage of the sensitivity of an imager and the systematic error control of an interferometer. A cold reflective optical combiner superimposes there-emitted beams from 400 aperture feedhorns on two focal planes. A shielding system composedof a fixed groundshield, and a forebaffle that moves with the instrument, limits the impact of local contaminants. The modelling, design, manufacturing and preliminary measurements of the optical components are described in this paper. △ Less

Submitted 25 August, 2021; v1 submitted 23 August, 2020; originally announced August 2020.

Comments: Part of a series of 8 papers on QUBIC to be published in a special issue of JCAP. Accepted for publication

QUBIC III: Laboratory Characterization

Authors: S. A. Torchinsky, J. -Ch. Hamilton, M. Piat, E. S. Battistelli, C. Chapron, G. D'Alessandro, P. de Bernardis, M. De Petris, M. M. Gamboa Lerena, M. González, L. Grandsire, S. Masi, S. Marnieros, A. Mennella, L. Mousset, J. D. Murphy, D. Prêle, G. Stankowiak, C. O'Sullivan, A. Tartari, J. -P. Thermeau, F. Voisin, M. Zannoni, P. Ade, J. G. Alberro , et al. (103 additional authors not shown)

Abstract: A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam,… ▽ More A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam, the measurement of interference fringes, and the measurement of polarization performance. A modulated and frequency tunable millimetre-wave source in the telescope far-field is used to simulate a point source. The QUBIC pointing is scanned across the point source to produce beam maps. Polarization modulation is measured using a rotating Half Wave Plate. The measured beam matches well to the theoretical simulations and gives QUBIC the ability to do spectro imaging. The polarization performance is excellent with less than 0.5\% cross-polarization rejection. QUBIC is ready for deployment on the high altitude site at Alto Chorillo, Argentina to begin scientific operations. △ Less

Submitted 15 March, 2022; v1 submitted 23 August, 2020; originally announced August 2020.

Comments: Part of a series of 8 papers on QUBIC accepted by JCAP for a special issue: https://iopscience.iop.org/journal/1475-7516/page/QUBIC_status_and_forecast

QUBIC: the Q & U Bolometric Interferometer for Cosmology

Authors: E. S. Battistelli, P. Ade, J. G. Alberro, A. Almela, G. Amico, L. H. Arnaldi, D. Auguste, J. Aumont, S. Azzoni, S. Banfi, P. Battaglia, A. Baù, B. Bèlier, D. Bennett, L. Bergè, J. -Ph. Bernard, M. Bersanelli, M. -A. Bigot-Sazy, N. Bleurvacq, J. Bonaparte, J. Bonis, A. Bottani, E. Bunn, D. Burke, D. Buzi , et al. (114 additional authors not shown)

Abstract: The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addr… ▽ More The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addresses these requirements using an innovative approach combining the sensitivity of Transition Edge Sensor cryogenic bolometers, with the deep control of systematics characteristic of interferometers. This makes QUBIC unique with respect to others classical imagers experiments devoted to the CMB polarization. In this contribution we report a description of the QUBIC instrument including recent achievements and the demonstration of the bolometric interferometry performed in lab. QUBIC will be deployed at the observation site in Alto Chorrillos, in Argentina at the end of 2019. △ Less

Submitted 28 January, 2020; originally announced January 2020.

Comments: Accepted for publication in the Journal of Low Temperature Physics

QUBIC: using NbSi TESs with a bolometric interferometer to characterize the polarisation of the CMB

Authors: M. Piat, B. Bélier, L. Bergé, N. Bleurvacq, C. Chapron, S. Dheilly, L. Dumoulin, M. González, L. Grandsire, J. -Ch. Hamilton, S. Henrot-Versillé, D. T. Hoang, S. Marnieros, W. Marty, L. Montier, E. Olivieri, C. Oriol, C. Perbost, D. Prêle, D. Rambaud, M. Salatino, G. Stankowiak, J. -P. Thermeau, S. Torchinsky, F. Voisin , et al. (113 additional authors not shown)

Abstract: QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detec… ▽ More QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detectors. QUBIC will be deployed in Argentina, at the Alto Chorrillos mountain site near San Antonio de los Cobres, in the Salta province. The QUBIC detection chain consists in 2048 NbSi Transition Edge Sensors (TESs) cooled to 350mK.The voltage-biased TESs are read out with Time Domain Multiplexing based on Superconducting QUantum Interference Devices (SQUIDs) at 1 K and a novel SiGe Application-Specific Integrated Circuit (ASIC) at 60 K allowing to reach an unprecedented multiplexing (MUX) factor equal to 128. The QUBIC experiment is currently being characterized in the lab with a reduced number of detectors before upgrading to the full instrument. I will present the last results of this characterization phase with a focus on the detectors and readout system. △ Less

Submitted 9 December, 2019; v1 submitted 27 November, 2019; originally announced November 2019.

Comments: Conference proceedings submitted to the Journal of Low Temperature Physics for LTD18

QUBIC: Exploring the primordial Universe with the Q\&U Bolometric Interferometer

Authors: Aniello Mennella, Peter Ade, Giorgio Amico, Didier Auguste, Jonathan Aumont, Stefano Banfi, Gustavo Barbaràn, Paola Battaglia, Elia Battistelli, Alessandro Baù, Benoit Bélier, David G. Bennett, Laurent Bergé, Jean Philippe Bernard, Marco Bersanelli, Marie Anne Bigot Sazy, Nathat Bleurvacq, Juan Bonaparte, Julien Bonis, Emory F. Bunn, David Burke, Daniele Buzi, Alessandro Buzzelli, Francesco Cavaliere, Pierre Chanial , et al. (105 additional authors not shown)

Abstract: In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its… ▽ More In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its spectral imaging power, i.e. the ability to separate the signal in various sub-bands within each frequency band. QUBIC will observe the sky in two main frequency bands: 150 GHz and 220 GHz. A technological demonstrator is currently under testing and will be deployed in Argentina during 2019, while the final instrument is expected to be installed during 2020. △ Less

Submitted 23 January, 2019; v1 submitted 30 November, 2018; originally announced December 2018.

Comments: Proceedings of the 2018 ICNFP conference, Crete. Published by Universe arXiv admin note: text overlap with arXiv:1801.03730

Journal ref: Universe 2019, 5, 42

Thermal architecture for the QUBIC cryogenic receiver

Authors: A. J. May, C. Chapron, G. Coppi, G. D'Alessandro, P. de Bernardis, S. Masi, S. Melhuish, M. Piat, L. Piccirillo, A. Schillaci, J. -P. Thermeau, P. Ade, G. Amico, D. Auguste, J. Aumont, S. Banfi, G. Barbara, P. Battaglia, E. Battistelli, A. Bau, B. Belier, D. Bennett, L. Berge, J. -Ph. Bernard, M. Bersanelli , et al. (105 additional authors not shown)

Abstract: QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex opt… ▽ More QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex optical and detector stages to 40 K, 4 K, 1 K and 350 mK using two pulse tube coolers, a novel 4He sorption cooler and a double-stage 3He/4He sorption cooler. We discuss the thermal and mechanical design of the cryostat, modelling and thermal analysis, and laboratory cryogenic testing. △ Less

Submitted 6 November, 2018; originally announced November 2018.

Journal ref: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX. Vol. 10708. International Society for Optics and Photonics, 2018

A template of atmospheric molecular oxygen circularly polarized emission for CMB experiments

Authors: Giulio Fabbian, Sebastiano Spinelli, Massimo Gervasi, Andrea Tartari, Mario Zannoni

Abstract: We compute the polarized signal from atmospheric molecular oxygen due to Zeeman effect in the Earth magnetic field for various sites suitable for CMB measurements such as South Pole, Dome C (Antarctica) and Atacama desert (Chile). We present maps of this signal for those sites and show their typical elevation and azimuth dependencies. We find a typical circularly polarized signal (V Stokes paramet… ▽ More We compute the polarized signal from atmospheric molecular oxygen due to Zeeman effect in the Earth magnetic field for various sites suitable for CMB measurements such as South Pole, Dome C (Antarctica) and Atacama desert (Chile). We present maps of this signal for those sites and show their typical elevation and azimuth dependencies. We find a typical circularly polarized signal (V Stokes parameter) level of 50 - 300 μK at 90 GHz when looking at the zenith; Atacama site shows the lowest emission while Dome C site presents the lowest gradient in polarized brightness temperature (0.3 μK/deg at 90 GHz). The accuracy and robustness of the template are tested with respect to actual knowledge of the Earth magnetic field, its variability and atmospheric parameters. △ Less

Submitted 3 June, 2012; originally announced June 2012.

Comments: To appear in the proceeding of 47th Rencontres de Moriond

Intensity and polarization of the atmospheric emission at millimetric wavelengths at Dome Concordia

Authors: E. S. Battistelli, G. Amico, A. Baù, L. Bergé, É. Bréelle, R. Charlassier, S. Collin, A. Cruciani, P. de Bernardis, C. Dufour, L. Dumoulin, M. Gervasi, M. Giard, C. Giordano, Y. Giraud-Héraud, L. Guglielmi, J. -C. Hamilton, J. Landé, B. Maffei, M. Maiello, S. Marnieros, S. Masi, A. Passerini, F. Piacentini, M. Piat , et al. (10 additional authors not shown)

Abstract: Atmospheric emission is a dominant source of disturbance in ground-based astronomy at mm wavelengths. The Antarctic plateau is recognized to be an ideal site for mm and sub-mm observations, and the French/Italian base of Dome C is among the best sites on Earth for these observations. In this paper we present measurements, performed using the BRAIN-pathfinder experiment, at Dome C of the atmospheri… ▽ More Atmospheric emission is a dominant source of disturbance in ground-based astronomy at mm wavelengths. The Antarctic plateau is recognized to be an ideal site for mm and sub-mm observations, and the French/Italian base of Dome C is among the best sites on Earth for these observations. In this paper we present measurements, performed using the BRAIN-pathfinder experiment, at Dome C of the atmospheric emission in intensity and polarization at 150GHz, one of the best observational frequencies for CMB observations when considering cosmic signal intensity, atmospheric transmission, detectors sensitivity, and foreground removal. Careful characterization of the air-mass synchronous emission has been performed, acquiring more that 380 elevation scans (i.e. "skydip") during the third BRAIN-pathfinder summer campaign in December 2009/January 2010. The extremely high transparency of the Antarctic atmosphere over Dome Concordia is proven by the very low measured optical depth: <tau_I>=0.050 \pm 0.003 \pm 0.011 where the first error is statistical and the second is systematic error. Mid term stability, over the summer campaign, of the atmosphere emission has also been studied. Adapting the radiative transfer atmosphere emission model "am" to the particular conditions found at Dome C, we also infer the level of the PWV content of the atmosphere, notoriously the main source of disturbance in millimetric astronomy (<PWV>=0.77 +/- 0.06 + 0.15 - 0.12 mm). Upper limits on the air-mass correlated polarized signal are also placed for the first time. The degree of circular polarization of atmospheric emission is found to be lower than 0.2% (95%CL), while the degree of linear polarization is found to be lower than 0.1% (95%CL). These limits include signal-correlated instrumental spurious polarization. △ Less

Submitted 20 April, 2012; v1 submitted 26 March, 2012; originally announced March 2012.

Comments: MNRAS accepted for publication. Refined analysis

A template of atmospheric O2 circularly polarized emission for CMB experiments

Authors: Sebastiano Spinelli, Giulio Fabbian, Andrea Tartari, Mario Zannoni, Massimo Gervasi

Abstract: We compute the circularly polarized signal from atmospheric molecular oxygen. Polarization of O2 rotational lines is caused by Zeeman effect in the Earth magnetic field. We evaluate the circularly polarized emission for various sites suitable for CMB measurements: South Pole and Dome C (Antarctica), Atacama (Chile) and Testa Grigia (Italy). An analysis of the polarized signal is presented and disc… ▽ More We compute the circularly polarized signal from atmospheric molecular oxygen. Polarization of O2 rotational lines is caused by Zeeman effect in the Earth magnetic field. We evaluate the circularly polarized emission for various sites suitable for CMB measurements: South Pole and Dome C (Antarctica), Atacama (Chile) and Testa Grigia (Italy). An analysis of the polarized signal is presented and discussed in the framework of future CMB polarization experiments. We find a typical circularly polarized signal (V Stokes parameter) of ~ 50 - 300 μK at 90 GHz looking at the zenith. Among the other sites Atacama shows the lower polarized signal at the zenith. We present maps of this signal for the various sites and show typical elevation and azimuth scans. We find that Dome C presents the lowest gradient in polarized temperature: ~ 0.3 μK/\circ at 90 GHz. We also study the frequency bands of observation: around ν \simeq 100 GHz and ν \simeq 160 GHz we find the best conditions because the polarized signal vanishes. Finally we evaluate the accuracy of the templates and the signal variability in relation with the knowledge and the variability of the Earth magnetic field and the atmospheric parameters. △ Less

Submitted 1 March, 2011; originally announced March 2011.

Comments: 10 pages, 12 figures, accepted for publication on Mon. Not. R. Astron. Soc

On the detectability of cosmic ray electron spectral features in the microwave/mm-wave range

Authors: Andrea Tartari, Massimo Gervasi, Giorgio Sironi, Mario Zannoni, Sebastiano Spinelli

Abstract: Recent measurements of cosmic ray electron energy spectra suggest that above 10 GeV there may be deviations from a single power law spectrum. There are hints (ATIC) for a bump occurring between 100 GeV and 1TeV, meaning that there might be more high energy electrons than expected. Whether these electrons are produced within pulsar magnetospheres, or due to Dark Matter annihilation or decay, this i… ▽ More Recent measurements of cosmic ray electron energy spectra suggest that above 10 GeV there may be deviations from a single power law spectrum. There are hints (ATIC) for a bump occurring between 100 GeV and 1TeV, meaning that there might be more high energy electrons than expected. Whether these electrons are produced within pulsar magnetospheres, or due to Dark Matter annihilation or decay, this is still matter of debate. Understanding the nature of these ultra high energy particles is a difficult task that can be fulfilled using all the available astrophysical observables. We investigate how different energy spectra produce different observable manifestations in the radio/microwave/mm-wave domain, where corresponding deviations from a synchrotron power law could appear. We raise the question around the detectability of these possible radio spectral features, which may be interesting for a wide scientific community including astrophysicists and scientists working on foregrounds removal for CMB experiments. △ Less

Submitted 1 December, 2010; originally announced December 2010.

Comments: Accepted for publication in the Proceedings of the ICATPP Conference on Cosmic Rays for Particle and Astroparticle Physics, Villa Olmo (Como, Italy), 7-8 October, 2010, to be published by World Scientific

QUBIC: The QU Bolometric Interferometer for Cosmology

Authors: The QUBIC collaboration, E. Battistelli, A. Baù, D. Bennett, L. Bergé, J. -Ph. Bernard, P. de Bernardis, A. Bounab, É. Bréelle, E. F. Bunn, M. Calvo, R. Charlassier, S. Collin, A. Cruciani, G. Curran, L. Dumoulin, A. Gault, M. Gervasi, A. Ghribi, M. Giard, C. Giordano, Y. Giraud-Héraud, M. Gradziel, L. Guglielmi, J. -Ch. Hamilton , et al. (35 additional authors not shown)

Abstract: One of the major challenges of modern cosmology is the detection of B-mode polarization anisotropies in the CMB. These originate from tensor fluctuations of the metric produced during the inflationary phase. Their detection would therefore constitute a major step towards understanding the primordial Universe. The expected level of these anisotropies is however so small that it requires a new gener… ▽ More One of the major challenges of modern cosmology is the detection of B-mode polarization anisotropies in the CMB. These originate from tensor fluctuations of the metric produced during the inflationary phase. Their detection would therefore constitute a major step towards understanding the primordial Universe. The expected level of these anisotropies is however so small that it requires a new generation of instruments with high sensitivity and extremely good control of systematic effects. We propose the QUBIC instrument based on the novel concept of bolometric interferometry, bringing together the sensitivity advantages of bolometric detectors with the systematics effects advantages of interferometry. Methods: The instrument will directly observe the sky through an array of entry horns whose signals will be combined together using an optical combiner. The whole set-up is located inside a cryostat. Polarization modulation will be achieved using a rotating half-wave plate and interference fringes will be imaged on two focal planes (separated by a polarizing grid) tiled with bolometers. We show that QUBIC can be considered as a synthetic imager, exactly similar to a usual imager but with a synthesized beam formed by the array of entry horns. Scanning the sky provides an additional modulation of the signal and improve the sky coverage shape. The usual techniques of map-making and power spectrum estimation can then be applied. We show that the sensitivity of such an instrument is comparable with that of an imager with the same number of horns. We anticipate a low level of beam-related systematics thanks to the fact that the synthesized beam is determined by the location of the primary horns. Other systematics should be under good control thanks to an autocalibration technique, specific to our concept, that will permit the accurate determination of most of the systematics parameters. △ Less

Submitted 4 October, 2010; originally announced October 2010.

Comments: 12 pages, 10 figures, submitted to Astronomy and Astrophysics

Cosmological observations in the radio domain: the contribution of extragalactic sources

Authors: Andrea Tartari, Mario Zannoni, Massimo Gervasi, Giorgio Sironi, Sebastiano Spinelli

Abstract: The low frequency tail of the CMB spectrum, down along the radio range (~1 GHz), may carry weak spectral distortions which are fingerprints of processes occurred during different epochs of the thermal history of the Universe, from z~3\times 10^6 to reionization. TRIS and ARCADE2 are the most recent experiments dedicated to the exploration of this chapter of CMB cosmology. The level of instrumental… ▽ More The low frequency tail of the CMB spectrum, down along the radio range (~1 GHz), may carry weak spectral distortions which are fingerprints of processes occurred during different epochs of the thermal history of the Universe, from z~3\times 10^6 to reionization. TRIS and ARCADE2 are the most recent experiments dedicated to the exploration of this chapter of CMB cosmology. The level of instrumental accuracy they reached in the determination of the absolute sky temperature is such that the removal of galactic and extra-galactic contamination is the true bottleneck towards the recovery of the cosmological signal. This will be certainly the case also for future experiments in the radio domain. Here we present an update of a study originally done to recognize the contribution of unresolved extra-galactic radio sources to the sky brightness measured by TRIS. Despite the specific context which originated our analysis, this is a study of general interest, improved by the inclusion of all the source counts available up-to-date from 150 MHz to 8.4 GHz. △ Less

Submitted 24 May, 2010; originally announced May 2010.

Comments: to appear in the proceedings of 45th Rencontres de Moriond - Cosmology Session, La Thuile, March 13-20, 2010

SAGACE: the Spectroscopic Active Galaxies And Clusters Explorer

Authors: P. De Bernardis, D. Bagliani, A. Bardi, E. Battistelli, M. Birkinshaw, M. Calvo, S. Colafrancesco, A. Conte, S. De Gregori, M. De Petris, G. De Zotti, A. Donati, L. Ferrari, A. Franceschini, F. Gatti, M. Gervasi, P. Giommi, C. Giordano, J. Gonzalez-Nuevo, L. Lamagna, A. Lapi, G. Luzzi, R. Maiolino, P. Marchegiani, A. Mariani , et al. (20 additional authors not shown)

Abstract: The SAGACE experiment consists of a mm/sub-mm telescope with a 3-m diameter primary mirror, coupled to a cryogenic multi-beam differential spectrometer. SAGACE explores the sky in the 100-760 GHz frequency range, using four diffraction-limited bolometer arrays. The instrument is designed to perform spectroscopic surveys of the Sunyaev-Zeldovich effects of thousands of galaxy clusters, of the spe… ▽ More The SAGACE experiment consists of a mm/sub-mm telescope with a 3-m diameter primary mirror, coupled to a cryogenic multi-beam differential spectrometer. SAGACE explores the sky in the 100-760 GHz frequency range, using four diffraction-limited bolometer arrays. The instrument is designed to perform spectroscopic surveys of the Sunyaev-Zeldovich effects of thousands of galaxy clusters, of the spectral energy distribution of active galactic nuclei, and of the [CII] line of a thousand galaxies in the redshift desert. In 2008 a full phase-A study for a national small mission was completed and delivered to the Italian Space Agency (ASI). We have shown that taking advantage of the differential operation of the Fourier Transform Spectrometer, this ambitious instrument can operate from a Molniya orbit, and can be built and operated within the tight budget of a small mission. △ Less

Submitted 3 February, 2010; originally announced February 2010.

Comments: Proceedings of the 12th Marcel Grossman Meeting

A demonstrator for bolometric interferometry

Authors: Adnan Ghribi, Andrea Tartari, Silvia Galli, Michel Piat, Eric Breelle, Jean-Christophe Hamilton, Sebastiano Spinelli, Massimo Gervasi, Mario Zannoni

Abstract: Bolometric Interferometry (BI) is one of the most promising techniques for precise measurements of the Cosmic Microwave Background polarization. In this paper, we present the results of DIBO (Demonstrateur d'Interferometrie Bolometrique), a single-baseline demonstrator operating at 90 GHz, built to proof the validity of the BI concept applied to a millimeter-wave interferometer. This instrument… ▽ More Bolometric Interferometry (BI) is one of the most promising techniques for precise measurements of the Cosmic Microwave Background polarization. In this paper, we present the results of DIBO (Demonstrateur d'Interferometrie Bolometrique), a single-baseline demonstrator operating at 90 GHz, built to proof the validity of the BI concept applied to a millimeter-wave interferometer. This instrument has been characterized in the laboratory with a detector at room temperature and with a 4 K bolometer. This allowed us to measure interference patterns in a clean way, both (1) rotating the source and (2) varying with time the phase shift among the two interferometer's arms. Detailed modelisation has also been performed and validated with measurements. △ Less

Submitted 2 February, 2009; originally announced February 2009.

Comments: 15 pages, 14 figures