Showing 1–50 of 120 results for author: Schmieder, B

EUV Wave and Coronal Seismology

Authors: Pooja Devi, Ramesh Chandra, Arun Kumar Awasthi, Brigitte Schmieder, Reetika Joshi

Abstract: We present an investigation of the Extreme-Ultraviolet (EUV) wave linked to the flare that occurred on 28 October 2021, along with the associated coronal loop oscillation and type II radio burst. The EUV wave was observed by multi-viewpoint with Solar Dynamics Observatory and Solar Terrestrial Relations Observatory - A. The associated coronal mass ejection (CME) was observed by Large Angle and Spe… ▽ More We present an investigation of the Extreme-Ultraviolet (EUV) wave linked to the flare that occurred on 28 October 2021, along with the associated coronal loop oscillation and type II radio burst. The EUV wave was observed by multi-viewpoint with Solar Dynamics Observatory and Solar Terrestrial Relations Observatory - A. The associated coronal mass ejection (CME) was observed by Large Angle and Spectrometric Coronagraph (LASCO) as well by COR1 coronagraph. From the multi-view observation, we found that the EUV wave is propagated ahead of the connected CME. The coronal magnetic field measurement was performed by the coronal loop oscillations as well by the associated m-type II radio burst observations. We found the magnetic field strength values computed by both methods are consistence and are in the range of ~ 5 to 10 G. △ Less

Submitted 2 July, 2025; originally announced July 2025.

Comments: 6 pages, 3 pages

Journal ref: Proceedings IAU Symposium No. 388, 2024

SIP-IFVM: An observation-based magnetohydrodynamic model of coronal mass ejection

Authors: Haopeng Wang, Jinhan Guo, Stefaan Poedts, Andrea Lani, Luis Linan, Tinatin Baratashvili, Liping Yang, Hyun-Jin Jeong, Wenwen Wei, Caixia Li, Yun Yang, Yucong Li, Hao Wu, Yang Guo, Brigitte Schmieder

Abstract: Currently, achieving a balance between computational efficiency, accuracy, and numerical stability in CME simulations, particularly in the sub-Alfv{'e}nic coronal region, remains a significant challenge. This paper aims to address the challenge by integrating observational data and developing advanced numerical algorithms, focusing on reproducing large-scale CME evolutions that are consistent with… ▽ More Currently, achieving a balance between computational efficiency, accuracy, and numerical stability in CME simulations, particularly in the sub-Alfv{'e}nic coronal region, remains a significant challenge. This paper aims to address the challenge by integrating observational data and developing advanced numerical algorithms, focusing on reproducing large-scale CME evolutions that are consistent with observations in the coronal region. Based on the recently developed fully implicit thermodynamic MHD coronal model (Wang et al. 2025a), we further use an observation-based RBSL flux rope to trigger a CME event during CR 2111. Additionally, we improve the temporal accuracy using a 2nd-order accurate ESDIRK2 method, with the intermediate stage solutions computed by the 2nd-order accurate BDF2 pseudo-time marching method. To enhance the numerical stability of ESDIRK2, we apply approximate linearisation in the implicitly solved intermediate stages. Furthermore, we adjust the time-evolving magnetic field B1 to zero at the end of each physical time step to further validate the extended magnetic field decomposition approach proposed by (Wang et al. 2025a). It is noticed that the model successfully reproduces the CME evolution consistent with white-light coronagraph observations, enables faster-than-real-time CME propagation simulations from solar surface to 0.1 AU using only a few dozen CPU cores on approximately 1 million grid cells, and remains numerically stable in CME simulations involving low-\b{eta} regions. The simulation results show that this novel MHD coronal model, combined with an observation-based magnetic flux rope, is sufficiently numerically stable and computationally efficient to reproduce real CME events propagating through the sub-Alfv{é}nic coronal region. Thus, the observation-based CME model is well suited for practical applications in daily space weather forecasting. △ Less

Submitted 24 June, 2025; originally announced June 2025.

Comments: 25 pages, 8 figures

Counter-Streaming Velocities in a Quiescent Filament

Authors: Garima Karki, Brigitte Schmieder, Pascal Demoulin, Pooja Devi, Ramesh Chandra, Reetika Joshi

Abstract: Filaments/prominences are cold plasma (~ 10000 K) embedded in the solar corona, two orders of magnitude hotter. Filament plasma is structured by the magnetic field in thin elongated threads. Counter-streaming flows have been observed. The aim of this paper is to characterize these flows. For that, we use high spatial resolution observations of spectral data obtained with THEMIS in H-alpha and with… ▽ More Filaments/prominences are cold plasma (~ 10000 K) embedded in the solar corona, two orders of magnitude hotter. Filament plasma is structured by the magnetic field in thin elongated threads. Counter-streaming flows have been observed. The aim of this paper is to characterize these flows. For that, we use high spatial resolution observations of spectral data obtained with THEMIS in H-alpha and with IRIS in Mg II k lines on 29 September 2023. We best detect counter-streaming flows in both the blue and red wings of these spectral lines. They are forming long Doppler shifted strands slightly inclined on the filament axis. The blue/red shift alternates across the strands at the arc second scale. H-alpha spectral profiles with large widths are interpreted as formed by multi-strands with opposite velocity directions. The absorption in the core of Mg II k line is also broader than in the chromosphere. This corresponds also to counter-streaming velocities. We derive that a fraction of the filament plasma is moving at supersonic speed (of the order of 20 km/s ) with the assumption that the filament is optically thick. We conclude that the counter-directed Doppler shifts might not be magnetic field aligned flows but rather correspond to kink transverse oscillations of the magnetic field with independent motions in nearby strands. △ Less

Submitted 22 June, 2025; originally announced June 2025.

Comments: 25 pages, 13 figures

Time-evolving coronal modelling of solar maximum around the May 2024 storm by COCONUT

Authors: Haopeng Wang, Stefaan Poedts, Andrea Lani, Luis Linan, Tinatin Baratashvili, Fan Zhang, Daria Sorokina, Hyun-jin Jeong, Yucong Li, Najafi-Ziyazi Mahdi, Brigitte Schmieder

Abstract: Coronal simulations of the solar maximum struggle with poor numerical stability and low computational efficiency since the magnetic field is more complex and stronger and coronal structures evolve more rapidly. This paper aims to enhance the numerical stability of the time-evolving COCONUT coronal model to mitigate these issues, to evaluate differences between the time-evolving and quasi-steady-st… ▽ More Coronal simulations of the solar maximum struggle with poor numerical stability and low computational efficiency since the magnetic field is more complex and stronger and coronal structures evolve more rapidly. This paper aims to enhance the numerical stability of the time-evolving COCONUT coronal model to mitigate these issues, to evaluate differences between the time-evolving and quasi-steady-state coronal simulation results, and to assess the impact of spatial resolution on global MHD coronal modelling of solar maximum.After enhancing the positivity-preserving property of the time-evolving COCONUT, we employ it to simulate the evolution of coronal structures from the solar surface to 0.1 AU over two CRs around the May 2024 solar storm event. These simulations are performed on unstructured meshes containing 6.06, 1.52, and 0.38 M cells to assess the impact of grid resolution. We also conduct a quasi-steady-state coronal simulation, treating the solar surface as a rigidly rotating spherical shell, to demonstrate the impact of magnetic flux emergence and cancellation in global coronal simulations. Comparison with observations further validates the reliability of this model.This paper demonstrates that incorporating magnetic field evolution in inner-boundary conditions can significantly improve the fidelity of global MHD coronal simulations around solar maximum. The simulated magnetic field strength using a refined mesh with 6.06 M cells can be more than 40% stronger than that in the coarser mesh with 0.38 M cells. A time step of 5 minutes and the mesh containing 1.5 M cells can effectively capture the evolution of large-scale coronal structures and small-sized dipoles. Thus, this model shows promise for accurately conducting real-time global coronal simulations of solar maximum, making it suitable for practical applications. △ Less

Submitted 17 May, 2025; originally announced May 2025.

Comments: 12 pages, 7 figures

Spectroscopic investigations of a filament reconnecting with coronal loops during a two-ribbon solar flare

Authors: Reetika Joshi, Jaroslav Dudík, Brigitte Schmieder, Guillaume Aulanier, Ramesh Chandra

Abstract: In the standard 2D model of eruption, the eruption of a magnetic flux rope is associated with magnetic reconnection occurring beneath it. However, in 3D, additional reconnection geometries are possible, in particular the AR-RF, where external reconnection involving the overlying arcades (A) and erupting flux rope (R) turns into another arcade and a flare loop (F). This process results in the drift… ▽ More In the standard 2D model of eruption, the eruption of a magnetic flux rope is associated with magnetic reconnection occurring beneath it. However, in 3D, additional reconnection geometries are possible, in particular the AR-RF, where external reconnection involving the overlying arcades (A) and erupting flux rope (R) turns into another arcade and a flare loop (F). This process results in the drifting of the legs of the erupting flux rope. We investigated spectroscopic signatures of such AR-RF reconnection occurring in an erupting filament reconnecting with coronal arcades during a two-ribbon flare. The evolution of the erupting filament eruption is examined using observations by the Atmospheric Imaging Assembly (AIA) and the Interface Region Imaging Spectrograph (IRIS). As the filament rises into the corona, it reconnects with the surrounding arcade of coronal loops with localized brightenings, resulting in the disappearance of the coronal loops and formation of a hot flux rope, showing slipping motion of its footpoints extending to the previous footpoints of the coronal loops (AR-RF reconnection) as predicted by the 3D extensions to the Standard solar flare model. These brightenings are accompanied by the presence of strong blue-shifts in both the IRIS Si IV and Mg II lines, upto about 200 km/s. The lines are also extremely wide, with non-thermal widths above 100 km/s. Furthermore, a strongly non-Gaussian profile of the most blue-shifted component is detected at the start of the AR-RF reconnection, indicating the presence of accelerated particles and MHD turbulence, and associated with the appearance of hot plasma in the AIA 94 A passband. For the first time, an observation has been reported in which the IRIS slit successfully captures AR-RF reconnection between a filament and overlying arcades, resulting in strong blue-shifts and very broad line profiles. △ Less

Submitted 7 May, 2025; v1 submitted 7 May, 2025; originally announced May 2025.

Comments: 14 pages, 8 figures, 1 figure in the Appendix, Accepted in A&A

Journal ref: A&A 698, A301 (2025)

The Birth of a Major Coronal Mass Ejection with Intricate Magnetic Structure from Multiple Active Regions

Authors: Jinhan Guo, Y. W. Ni, B. Schmieder, Y. Guo, C. Xia, P. Devi, R. Chandra, S. Poedts, R. Joshi, Y. H. Zhou, H. T. Li, P. F. Chen

Abstract: Coronal mass ejections (CMEs) are the eruptions of magnetised plasma from the Sun and are considered the main driver of adverse space weather events. Hence, undrstanding its formation process, particularly the magnetic topology, is critical for accurate space weather prediction. Here, based on imaging observations and three-dimensional (3D) data-constrained thermodynamic magnetohydrodynamical (MHD… ▽ More Coronal mass ejections (CMEs) are the eruptions of magnetised plasma from the Sun and are considered the main driver of adverse space weather events. Hence, undrstanding its formation process, particularly the magnetic topology, is critical for accurate space weather prediction. Here, based on imaging observations and three-dimensional (3D) data-constrained thermodynamic magnetohydrodynamical (MHD) simulation in spherical coordinates, we exhibit the birth of a CME with intricate magnetic structure from multiple active regions (ARs) due to 3D magnetic reconnection. It is observed as a coronal jet between active regions, accompanied by the back-flowing of filament materials along the jet spine after the passage of the eruptive filament. This jet connects two dimming regions within different active regions. This is an observational proxy of 3D magnetic reconnection between the CME flux rope and the null-point magnetic field lines crossing active regions. Hereafter, the thermodynamic data-constrained MHD simulation successfully reproduces the observed jet and the reconnection process that flux ropes partake in, leading to a CME flux rope with a complex magnetic structure distinct from its progenitor. The generality of this scenario is then validated by data-inspired MHD simulations in a simple multipolar magnetic configuration. This work demonstrates the role of multiple active regions in forming CMEs with intricate magnetic structures. On the one hand, a non-coherent flux rope where not all twisted magnetic field lines wind around one common axis is naturally formed. On the other hand, our findings suggest that the topology of a real CME flux rope may not be solely determined by a single active region, particularly during periods of solar maximum. △ Less

Submitted 25 February, 2025; originally announced February 2025.

Comments: 19 pages, 8 figures, accepted for publication in ApJ

SIP-IFVM: A time-evolving coronal model with an extended magnetic field decomposition strategy

Authors: Haopeng Wang, Liping Yang, Stefaan Poedts, Andrea Lani, Yuhao Zhou, Yuhang Gao, Luis Linan, Jiakun Lv, Tinatin Baratashvili, Jinhan Guo, Rong Lin, Zhan Su, Caixia Li, Man Zhang, Wenwen Wei, Yun Yang, Yucong Li, Xinyi Ma, Edin Husidic, Hyun-jin Jeong, Najafi-Ziyazi Mahdi, Juan Wang, Brigitte Schmieder

Abstract: Time-evolving magnetohydrodynamic (MHD) coronal modeling, driven by a series of time-dependent photospheric magnetograms, represents a new generation of coronal simulations. This approach offers greater realism compared to traditional coronal models constrained by a static magnetogram. However, its practical application is seriously limited by low computational efficiency and poor numerical stabil… ▽ More Time-evolving magnetohydrodynamic (MHD) coronal modeling, driven by a series of time-dependent photospheric magnetograms, represents a new generation of coronal simulations. This approach offers greater realism compared to traditional coronal models constrained by a static magnetogram. However, its practical application is seriously limited by low computational efficiency and poor numerical stability. Therefore, we propose an extended magnetic field decomposition strategy and implement it in the implicit MHD model to develop a coronal model that is both efficient and numerically stable enough for simulating the long-term evolutions of the global corona. The traditional decomposition strategies split the magnetic field into a time-invariant potential field and a time-dependent component $\mathbf{B}_1$. It works well for quasi-steady-state coronal simulations where $\left|\mathbf{B}_1\right|$ is typically small. However, as the inner-boundary magnetic field evolves, $\left|\mathbf{B}_1\right|$ can grow significantly larger and its discretization errors often lead to nonphysical negative thermal pressure, ultimately causing the code to crash. In this paper, we mitigate such undesired situations by introducing a temporally piecewise-constant variable to accommodate part of the non-potential field and remain $\left|\mathbf{B}_1\right|$ consistently small throughout the simulations. We incorporate this novel magnetic field decomposition strategy into our implicit MHD coronal model and apply it to simulate the evolution of coronal structures within 0.1 AU over two solar-maximum Carrington rotations. The results show that this coronal model effectively captures observations and performs more than 80 times faster than real time using only 192 CPU cores, making it well-suited for practical applications in simulating the time-evolving corona. △ Less

Submitted 10 February, 2025; originally announced February 2025.

Comments: 26 pages,9 figures

Magnetic Reconnection between a Solar Jet and a Filament Channel

Authors: Garima Karki, Brigitte Schmieder, Pooja Devi, Ramesh Chandra, Nicolas Labrosse, Reetika Joshi, Bernard Gelly

Abstract: The solar corona is highly structured by bunches of magnetic field lines forming either loops, or twisted flux ropes representing prominences/filaments, or very dynamic structures such as jets. The aim of this paper is to understand the interaction between filament channels and jets. We use high-resolution H$α$ spectra obtained by the ground-based Telescope Heliographique pour lEtude du Magnetisme… ▽ More The solar corona is highly structured by bunches of magnetic field lines forming either loops, or twisted flux ropes representing prominences/filaments, or very dynamic structures such as jets. The aim of this paper is to understand the interaction between filament channels and jets. We use high-resolution H$α$ spectra obtained by the ground-based Telescope Heliographique pour lEtude du Magnetisme et des Instabilites Solaires (THEMIS) in Canary Islands, and data from Helioseismic Magnetic Imager (HMI) and Atmospheric Imaging Assembly (AIA) aboard the Solar Dynamics Observatory (SDO). In this paper we present a multi-wavelength study of the interaction of filaments and jets. They both consist of cool plasma embedded in magnetic structures. A jet is particularly well studied in all the AIA channels with a flow reaching 100-180 km s$^{-1}$. Its origin is linked to cancelling flux at the edge of the active region. Large Dopplershifts in H$α$ are derived in a typical area for a short time (order of min). They correspond to flows around 140 km s$^{-1}$. In conclusion we conjecture that these flows correspond to some interchange of magnetic field lines between the filament channel and the jets leading to cool plasmoid ejections or reconnection jets perpendicularly to the jet trajectory. △ Less

Submitted 12 December, 2024; originally announced December 2024.

Comments: 13 Figures, 14 pages

CME propagation in the dynamically coupled space weather tool: COCONUT + EUHFORIA

Authors: L. Linan, T. Baratashvili, A. Lani, B. Schmieder, M. Brchnelova, J. H. Guo, S. Poedts

Abstract: This paper aims to present the time-dependent coupling between the coronal model COolfluid COroNal UnsTructured (COCONUT) and the heliospheric forecasting tool EUHFORIA. We perform six COCONUT simulations where a flux rope is implemented at the solar surface using either the Titov-Démoulin CME model or the Regularized Biot-Savart Laws (RBSL) CME model. At regular intervals, the magnetic field, v… ▽ More This paper aims to present the time-dependent coupling between the coronal model COolfluid COroNal UnsTructured (COCONUT) and the heliospheric forecasting tool EUHFORIA. We perform six COCONUT simulations where a flux rope is implemented at the solar surface using either the Titov-Démoulin CME model or the Regularized Biot-Savart Laws (RBSL) CME model. At regular intervals, the magnetic field, velocity, temperature, and density of the 2D surface $R_{b}=21.5~\;R_{\odot}$ are saved in boundary files. This series of coupling files is read in a modified version of EUHFORIA to update progressively its inner boundary. After presenting the early stage of the propagation in COCONUT, we examine how the disturbance of the solar corona created by the propagation of flux ropes is transmitted into EUHFORIA. In particular, we consider the thermodynamic and magnetic profiles at L1 and compare them with those obtained at the interface between the two models. We demonstrate that the properties of the heliospheric solar wind in EUHFORIA are consistent with those in COCONUT, acting as a direct extension of the coronal domain. Moreover, the disturbances initially created from the propagation of flux ropes in COCONUT continue evolving from the corona in the heliosphere to Earth with a smooth transition at the interface between the two simulations. Looking at the profile of magnetic field components at Earth and different distances from the Sun, we also find that the transient magnetic structures have a self-similar expansion in COCONUT and EUHFORIA. However, the amplitude of the profiles depends on the flux rope model used and its properties, thus emphasizing the important role of the initial properties in solar source regions for accurately predicting the impact of CMEs. △ Less

Submitted 28 November, 2024; originally announced November 2024.

Study of the excitation of large amplitude oscillations in a prominence by nearby flares

Authors: Manuel Luna, Reetika Joshi, Brigitte Schmieder, Fernando Moreno-Insertis, Valeriia Liakh, Jaume Terradas

Abstract: Large amplitude oscillations commonly occur in solar prominences, triggered by energetic phenomena such as jets and flares. On March 14-15, 2015, a filament partially erupted in two stages, leading to oscillations in different parts. This study explores longitudinal oscillations from the eruption, focusing on the mechanisms behind their initiation, with special attention to the large oscillation o… ▽ More Large amplitude oscillations commonly occur in solar prominences, triggered by energetic phenomena such as jets and flares. On March 14-15, 2015, a filament partially erupted in two stages, leading to oscillations in different parts. This study explores longitudinal oscillations from the eruption, focusing on the mechanisms behind their initiation, with special attention to the large oscillation on March 15. The oscillations and jets are analyzed using the time-distance technique. For flares and their interaction with the filament, we analyze AIA channels and use the DEM technique. Initially, a jet fragments the filament, splitting it into two segments. One remains in place, while the other detaches and moves. This causes oscillations in both segments: (a) the position change causes the detached segment to oscillate with a period of $69 \pm 3$ minutes; (b) the jet flows cause the remaining filament to oscillate with a period of $62 \pm 2$ minutes. In the second phase, on March 15, another jet seemingly activates the detached filament eruption, followed by a flare. A large longitudinal oscillation occurs in the remnant segment with a period of $72 \pm 2$ minutes and velocity amplitude $73 \pm 1 \, \mathrm{km s^{-1}}$. During the oscillation trigger, bright field lines connect the flare with the filament, appearing only in the AIA 131$Å$ and 94$Å$ channels, indicating the presence of hot plasma. DEM analysis confirms this, showing plasma around 10 MK pushing the prominence from its southeastern side, displacing it along the field lines and starting the oscillation. From this, the flare -- not the preceding jet-triggers the oscillation. The hot plasma flows into the filament channel. We explain how flares trigger large oscillations in filaments by proposing that post-flare loops reconnect with the filament channel's magnetic field. △ Less

Submitted 14 October, 2024; originally announced October 2024.

Comments: Accepted for publication in Astronomy and Astrophysics

Journal ref: A&A 691, A354 (2024)

High-resolution observations of recurrent jets from an arch filament system

Authors: Reetika Joshi, Luc Rouppe van der Voort, Brigitte Schmieder, Fernando Moreno-Insertis, Avijeet Prasad, Guillaume Aulanier, Daniel Nóbrega-Siverio

Abstract: Solar jets are collimated plasma ejections along magnetic field lines observed in hot (EUV jets) and cool (chromospheric surges) temperature diagnostics. Their trigger mechanisms and the relationship between hot and cool jets are still not completely understood. We aim to investigate the generation of a sequence of active region solar jets and their evolution from the photospheric to the coronal h… ▽ More Solar jets are collimated plasma ejections along magnetic field lines observed in hot (EUV jets) and cool (chromospheric surges) temperature diagnostics. Their trigger mechanisms and the relationship between hot and cool jets are still not completely understood. We aim to investigate the generation of a sequence of active region solar jets and their evolution from the photospheric to the coronal heights. Using the synergy of high spatial and temporal resolution observations by the SST, along with the SDO, we analyze a sequence of solar jets originating in a mixed polarity region between the leading and following sunspots of an active region. We use a NFFF extrapolation technique for deriving the magnetic field topology of the active region. A mixed polarity region is formed over a long period (24 hours) with persistent magnetic flux emergence. This region has been observed as an arch filament system (AFS) in chromospheric SST observations. In this region, negative polarities surrounded by positive polarities create a fan-surface with a null point at a height of 6 Mm detected in the NFFF extrapolation. SST observations in H-beta spectral line reveal a large flux rope over the AFS and moving from the North to South, causing successive EUV and cool jets to move in the East-West direction and later towards the South along the long open loops. The high resolution SST observations (0.038 arcsec per pixel) resolve the dark area observed at the jet base and reveal the existence of an AFS with an extended cool jet which may be the result of a peeling-like mechanism of the AFS. Based on the combined analysis of SST and AIA observations along with extrapolated magnetic topology, it is suggested that the magnetic reconnection site may move southward by approximately 20 Mm until it reaches a region where the open magnetic field lines are oriented North-South. △ Less

Submitted 30 August, 2024; originally announced August 2024.

Comments: 14 pages, 11 figures, accepted for publication in A&A

Journal ref: A&A 691, A198 (2024)

Recent advances in solar data-driven MHD simulations of the formation and evolution of CME flux ropes

Authors: Brigitte Schmieder, Jinhan Guo, Stefaan Poedts

Abstract: Filament eruptions and coronal mass ejections are physical phenomena related to magnetic flux ropes carrying electric current. A magnetic flux rope is a key structure for solar eruptions, and when it carries a southward magnetic field component when propagating to the Earth. It is the primary driver of strong geomagnetic storms. As a result, developing a numerical model capable of capturing the en… ▽ More Filament eruptions and coronal mass ejections are physical phenomena related to magnetic flux ropes carrying electric current. A magnetic flux rope is a key structure for solar eruptions, and when it carries a southward magnetic field component when propagating to the Earth. It is the primary driver of strong geomagnetic storms. As a result, developing a numerical model capable of capturing the entire progression of a flux rope, from its inception to its eruptive phase, is crucial for forecasting adverse space weather. The existence of such flux ropes is revealed by the presence of sigmoids in active regions or hot channels by observations from space and ground instruments. After proposing cartoons in 2D, potential, linear, non-linear-force-free-field (NLFFF) and non-force-free-field (NFFF) magnetic extrapolations, 3D numerical magnetohydrodynamic (MHD) simulation models were developed, first in a static configuration and later dynamic data-driven MHD models using high resolution observed vector magnetograms. This paper reviews a few recent developments in data-driven mode, such as the time-dependent magneto-frictional (TMF) and thermodynamic magnetohydrodynamic (MHD) models. Hereafter, to demonstrate the capacity of these models to reveal the physics of observations, we present the results for three events explored in our group: 1. the eruptive X1.0 flare on 28 October 2021; 2. the filament eruption on 18 August 2022; and 3. the confined X2.2 flare on 6 September 2017. These case studies validate the ability of data-driven models to retrieve observations, including the formation and eruption of flux ropes, 3D magnetic reconnection, CME three-part structures and the failed eruption. Based on these results, we provide some arguments for the formation mechanisms of flux ropes, the physical nature of the CME leading front, and the constraints of failed eruptions. △ Less

Submitted 12 August, 2024; originally announced August 2024.

Comments: 41 pages, 12 figures, pulished on Reviews of Modern Plasma Physics

How coronal mass ejections are influenced by the morphology and toroidal flux of their source magnetic flux ropes?

Authors: J. H. Guo, L. Linan, S. Poedts, Y. Guo, B. Schmieder, A. Lani, Y. W. Ni, M. Brchnelova, B. Perri, T. Baratashvili, S. T. Li, P. F. Chen

Abstract: Coronal mass ejections (CMEs) stand as intense eruptions of magnetized plasma from the Sun, playing a pivotal role in driving significant changes of the heliospheric environment. Deducing the properties of CMEs from their progenitors in solar source regions is crucial for space weather forecasting. Deducing the properties of CMEs from their progenitors in solar source regions is crucial for space… ▽ More Coronal mass ejections (CMEs) stand as intense eruptions of magnetized plasma from the Sun, playing a pivotal role in driving significant changes of the heliospheric environment. Deducing the properties of CMEs from their progenitors in solar source regions is crucial for space weather forecasting. Deducing the properties of CMEs from their progenitors in solar source regions is crucial for space weather forecasting. The primary objective of this paper is to establish a connection between CMEs and their progenitors in solar source regions, enabling us to infer the magnetic structures of CMEs before their full development. To this end, we create a dataset comprising a magnetic flux rope series with varying projection shapes, sizes and toroidal fluxes, using the Regularized Biot-Savart Laws (RBSL). Thereafter, we simulate the propagation of these flux ropes from the solar surface to a distance of 25$R_{\odot}$ with our global coronal MHD model which is named COCONUT. Our parametric survey reveals significant impacts of source flux ropes on the consequent CMEs. We find that the projection shape can influence the magnetic structures of CMEs at 20$R_{\odot}$, albeit with minimal impacts on the propagation speed. However, these impacts diminish as source flux ropes become fat. In terms of toroidal flux, our simulation results demonstrate a pronounced correlation with the propagation speed of CMEs, as well as the successfulness in erupting. This work builds the bridge between the CMEs in the outer corona and their progenitors in solar source regions. Our parametric survey suggests that the projection shape, cross-section radius and toroidal flux of source flux ropes are crucial parameters in predicting magnetic structures and propagation speed of CMEs, providing valuable insights for space weather prediction. △ Less

Submitted 12 July, 2024; originally announced July 2024.

Comments: 11 pages, 10 figrues, accepted for publication by A&A

Filament eruption by multiple reconnections

Authors: Y. Liu, G. P. Ruan, B. Schmieder, J. H. Guo, Y. Chen, R. S. Zheng, J. T. Su, B. Wang

Abstract: Filament eruption is a common phenomenon in solar activity, but the triggering mechanism is not well understood. We focus our study on a filament eruption located in a complex nest of three active regions close to a coronal hole. The filament eruption is observed at multiple wavelengths: by the GONG, the STEREO, the SUTRI, and the AIA and Helioseismic and Magnetic Imager (HMI) on board the SDO. Th… ▽ More Filament eruption is a common phenomenon in solar activity, but the triggering mechanism is not well understood. We focus our study on a filament eruption located in a complex nest of three active regions close to a coronal hole. The filament eruption is observed at multiple wavelengths: by the GONG, the STEREO, the SUTRI, and the AIA and Helioseismic and Magnetic Imager (HMI) on board the SDO. Thanks to high temporal-resolution observations, we were able to analyze the evolution of the fine structure of the filament in detail. The filament changes direction during the eruption, which is followed by a halo coronal mass ejection detected by the LASCO on board the SOHO. A Type III radio burst was also registered at the time of the eruption. To investigate the process of the eruption, we analyzed the magnetic topology of the filament region adopting a nonlinear force-free-field (NLFFF) extrapolation method and the polytropic global magnetohydrodynamic (MHD) modeling. We modeled the filament by embeddingatwisted fluxropewiththe regularized Biot-Savart Laws (RBSL) method in the ambient magnetic f ield. The extrapolation results show that magnetic reconnection occurs in a fan-spine configuration resulting in a circular flare ribbon. The global modeling of the corona demonstrates that there was an interaction between the filament and open field lines, causing a deflection of the filament in the direction of the observed CME eruption and dimming area. The modeling supports the following scenario: magnetic reconnection not only occurs with the filament itself (the flux rope) but also with the background magnetic field lines and open field lines of the coronal hole located to the east of the flux rope. This multiwavelength analysis indicates that the filament undergoes multiple magnetic reconnections on small and large scales with a drifting of the flux rope. △ Less

Submitted 2 June, 2024; originally announced June 2024.

Multi spacecraft study with the Icarus model: Modelling the propagation of CMEs to Mercury and Earth

Authors: Tinatin Baratashvili, Benjamin Grison, Brigitte Schmieder, Pascal Demoulin, Stefaan Poedts

Abstract: Coronal Mass Ejections (CMEs) are the main drivers of the disturbances in interplanetary space. Understanding the CME interior magnetic structure is crucial for advancing space weather studies. Assessing the capabilities of a numerical heliospheric model is crucial, as understanding the nature and extent of its limitations can be used for improving the model and the space weather predictions based… ▽ More Coronal Mass Ejections (CMEs) are the main drivers of the disturbances in interplanetary space. Understanding the CME interior magnetic structure is crucial for advancing space weather studies. Assessing the capabilities of a numerical heliospheric model is crucial, as understanding the nature and extent of its limitations can be used for improving the model and the space weather predictions based on it. The present paper aims to test the capabilities of the recently developed heliospheric model Icarus and the linear force-free spheromak model that has been implemented in it. To validate the Icarus space weather modeling tool, two CME events were selected that were observed by two spacecraft located near Mercury and Earth, respectively. This enables testing the heliospheric model computed with Icarus at two distant locations. The source regions for the CMEs were identified, and the CME parameters were determined and later optimized. Different adaptive mesh refinement levels were applied in the simulations to assess its performance by comparing the simulation results to in-situ measurements. The first CME event erupted on SOL2013-07-09T15:24. The modeled time series were in good agreement with the observations both at MESSENGER and ACE. The second CME event started on SOL2014-02-16T10:24 and was more complicated, as three CME interactions occurred in this event. It was impossible to recover the observed profiles without modeling the other two CMEs that were observed, one before the main CME and one afterward. For both CME studies, AMR level 3 was sufficient to reconstruct small-scale features near Mercury, while at Earth, AMR level 4 was necessary due to the radially stretched grid that was used. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Comments: 16 pages, 17 figures

Journal ref: A&A 689, A98 (2024)

Solar prominence diagnostics and their associated estimated errors from 1D NLTE Mg II h&k modelling

Authors: Aaron W. Peat, Nicolas Labrosse, Krzysztof Barczynski, Brigitte Schmieder

Abstract: Aims. We present further development of the rolling root mean square (rRMS) algorithm. These improvements consist of an increase in computational speed and an estimation of the uncertainty on the recovered diagnostics. This improvement is named the cross root mean square (xRMS) algorithm. Methods. We used the quantile method to recover the statistics of the line profiles in order to study the ev… ▽ More Aims. We present further development of the rolling root mean square (rRMS) algorithm. These improvements consist of an increase in computational speed and an estimation of the uncertainty on the recovered diagnostics. This improvement is named the cross root mean square (xRMS) algorithm. Methods. We used the quantile method to recover the statistics of the line profiles in order to study the evolution of the prominence observed by IRIS on 1 October 2019. We then introduced the improvements to rRMS. These improvements greatly increased the computational speed, and this increase in speed allowed us to use a large model grid. Thus, we utilised a grid of 23 940 models to recover the thermodynamic diagnostics. We used the 'good' (but not 'best') fitting models to recover an estimate of the uncertainty on the recovered diagnostics. Results. The maximum line-of-sight (LOS) velocities were found to be 70 km/s. The line widths were mostly 0.4 Å with the asymmetries of most pixels around zero. The central temperature of the prominence was found to range from 10 kK to 20 kK, with uncertainties of approximately +/-5 to +/-15 kK. The central pressure was around 0.2 dyn/cm2, with uncertainties of +/-0.2 to +/-0.3 dyn/cm2. The ionisation degree ranged from 1 to 1000, with uncertainties mostly in the range +/-10 to +/-100. The electron density was mostly 10^10 /cm3, with uncertainties of mostly +/-10^9. Conclusions. The new xRMS algorithm finds an estimation of the errors of the recovered thermodynamic properties. To our knowledge, this is the first attempt at systematically determining the errors from forward modelling. The large range of errors found may hint at the degeneracies present when using a single ion and/or species from forward modelling. In the future, co-aligned observations of more than one ion and/or species should be used to attempt to constrain this problem. △ Less

Submitted 10 May, 2024; originally announced May 2024.

Comments: 9 pages, 12 figures

Generic low-atmosphere signatures of swirled-anemone jets

Authors: Reetika Joshi, Guillaume Aulanier, Alice Radcliffe, Luc Rouppe van der Voort, Etienne Pariat, Daniel Nóbrega-Siverio, Brigitte Schmieder

Abstract: Solar jets are collimated plasma flows moving along magnetic field lines and accelerated at low altitude following magnetic reconnection. Several of them originate from anemone-shaped low-lying arcades and the most impulsive ones tend to be relatively wider and display untwisting motions. We aim to establish typical behaviours and observational signatures in the low atmosphere that can occur in re… ▽ More Solar jets are collimated plasma flows moving along magnetic field lines and accelerated at low altitude following magnetic reconnection. Several of them originate from anemone-shaped low-lying arcades and the most impulsive ones tend to be relatively wider and display untwisting motions. We aim to establish typical behaviours and observational signatures in the low atmosphere that can occur in response to the coronal development of such impulsive jets. We analysed an observed solar jet associated with a circular flare ribbon, using high-resolution observations from SST coordinated with IRIS and SDO. We related specifically identified features with those developing in a generic 3D line-tied numerical simulation of reconnection driven jets, performed with the ARMS code. We identified three features in the SST observations: the formation of a hook along the circular ribbon, the gradual widening of the jet through the apparent displacement of its kinked edge towards, and not away from the presumed reconnection site, and the falling back of some of the jet plasma towards a footpoint offset from that of the jet itself. The 3D numerical simulation naturally accounts for these features which were not imposed a priori. Our analyses allow to interpret them in the context of the 3D geometry of the asymmetric swirled anemone loops and their sequences of reconnection with ambient coronal loops. Given the relatively-simple conditions in which the observed jet occurred, together with the generic nature of the simulation that comprised minimum assumptions, we predict that the specific features that we identified and interpreted are probably typical of every impulsive jet △ Less

Submitted 19 April, 2024; originally announced April 2024.

Comments: 13 pages, 8 figures, Accepted for publication in Astronomy and Astrophysics

Journal ref: A&A 687, A172 (2024)

Transport of the magnetic flux away from a decaying sunspot via convective motions

Authors: Chenxi Zheng, Thierry Roudier, Brigitte Schmieder, Guiping Ruan, Jean-Marie Malherbe, Yang Liu, Yao Chen, Wenda Cao

Abstract: Aims. The aim of this paper is to consider relationship between the decay of sunspots and convection via the motion of the family of granules and how the diffusion mechanism of magnetic field operates in a decaying sunspot. Methods. We report the decay of a sunspot observed by the 1.6m Goode Solar Telescope (GST) with the TiO Broadband Filter Imager (BFI) and the Near-InfraRed Imaging Spectropolar… ▽ More Aims. The aim of this paper is to consider relationship between the decay of sunspots and convection via the motion of the family of granules and how the diffusion mechanism of magnetic field operates in a decaying sunspot. Methods. We report the decay of a sunspot observed by the 1.6m Goode Solar Telescope (GST) with the TiO Broadband Filter Imager (BFI) and the Near-InfraRed Imaging Spectropolarimeter (NIRIS). The analysis was aided by the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamic Observatory (SDO). In the first step, we followed the decay of the sunspot with HMI data over three days by constructing its evolving area and total magnetic flux. In the second step, the high spatial and temporal resolution of the GST instruments allowed us to analyze the causes of the decay of the sunspot. Afterward, we followed the emergence of granules in the moat region around the sunspot over six hours. The evolution of the trees of fragmenting granules (TFGs) was derived based on their relationship with the horizontal surface flows. Results. We find that the area and total magnetic flux display an exponential decrease over the course of the sunspot decay. We identified 22 moving magnetic features (MMFs) in the moats of pores, which is a signature of sunspot decay through diffusion. We note that the MMFs were constrained to follow the borders of TFGs during their journey away from the sunspot. Conclusions. The TFGs and their development contribute to the diffusion of the magnetic field outside the sunspot. The conclusion of our analysis shows the important role of the TFGs in sunspot decay. Finally, the the family of granules evacuates the magnetic field. △ Less

Submitted 31 March, 2024; originally announced April 2024.

Observational study of intermittent solar jets: p-mode modulation

Authors: Qiuzhuo Cai, Guiping Ruan, Chenxi Zheng, Brigitte Schmieder, Jinhan Guo, Yao Chen, Jiangtao Su, Yang Liu, Jihong Liu, Wenda Cao

Abstract: Aims. Recurring jets are observed in the solar atmosphere, which can erupt intermittently. By the observation of intermittent jets, we want to understand the causes of periodic eruption characteristics. Methods. We report intermittent jets observed by the GST. The analysis was aided by 1400 Å and 2796 Å data from IRIS.These observational instruments allowed us to analyze the temporal characteristi… ▽ More Aims. Recurring jets are observed in the solar atmosphere, which can erupt intermittently. By the observation of intermittent jets, we want to understand the causes of periodic eruption characteristics. Methods. We report intermittent jets observed by the GST. The analysis was aided by 1400 Å and 2796 Å data from IRIS.These observational instruments allowed us to analyze the temporal characteristics of jet events. Results. The jet continued for up to 4 hours. The time distance diagram shows that the peak of the jet has obviously periodic eruption characteristics (5 minutes) during 18:00 UT-18:50 UT. We also found periodic brightening phenomenon (5 minutes) during jets bursts in the observed bands in the Transition Region (1400 Å and 2796 Å), which may be a response to intermittent jets in the upper solar atmosphere.The time lag is 3 minutes. Evolutionary images in the TiO band revealed the horizontal movement of granulation at the location of jet. Compared to the quiet region of the Sun, we found that the footpoint of the jet is enhanced at the center of the H α spectral line profile, with no significant changes in the line wings. This suggests the presence of prolonged heating at the footpoint of the jet. In the mixed-polarity magnetic field region of the jet, we observed magnetic flux emergence, cancellation, and shear indicating possible intermittent magnetic reconnection. That is confirmed by the NLFFF model reconstructed using the magneto-friction method. Conclusions. The multi-wavelength analysis indicates that the events we studied were triggered by magnetic reconnection caused by mixed-polarity magnetic fields. We suggest that the horizontal motion of the granulation in the photosphere drives the magnetic reconnection, which is modulated by p-mode oscillations. △ Less

Submitted 7 December, 2023; v1 submitted 6 December, 2023; originally announced December 2023.

Modelling the propagation of coronal mass ejections with COCONUT: implementation of the Regularized Biot-Savart Laws flux rope model

Authors: Jinhan Guo, L. Linan, S. Poedts, Y. Guo, A. Lani, B. Schmieder, M. Brchnelova, B. Perri, T. Baratashvili, Y. W. Ni, P. F. Chen

Abstract: Context: Coronal mass ejections (CMEs) are rapid eruptions of magnetized plasma that occur on the Sun, which are known as the main drivers of adverse space weather. Accurately tracking their evolution in the heliosphere in numerical models is of utmost importance for space weather forecasting. Aims: The main objective of this paper is to implement the Regularized Biot-Savart Laws (RBSL) method in… ▽ More Context: Coronal mass ejections (CMEs) are rapid eruptions of magnetized plasma that occur on the Sun, which are known as the main drivers of adverse space weather. Accurately tracking their evolution in the heliosphere in numerical models is of utmost importance for space weather forecasting. Aims: The main objective of this paper is to implement the Regularized Biot-Savart Laws (RBSL) method in a new global corona model COCONUT. This approach has the capability to construct the magnetic flux rope with an axis of arbitrary shape. Methods: We present the implementation process of the RBSL flux rope model in COCONUT, which is superposed onto a realistic solar wind reconstructed from the observed magnetogram around the minimum of solar activity. Based on this, we simulate the propagation of an S-shaped flux rope from the solar surface to a distance of 25 solar radii. Results: Our simulation successfully reproduces the birth process of a CME originating from a sigmoid in a self-consistent way. The model effectively captures various physical processes and retrieves the prominent features of the CMEs in observations. In addition, the simulation results indicate that the magnetic topology of the CME flux rope at around 20 solar radii deviates from a coherent structure, and manifests as a mix of open and closed field lines with diverse footpoints. Conclusions: This work demonstrates the potential of the RBSL flux rope model in reproducing CME events that are more consistent with observations. Moreover, our findings strongly suggest that magnetic reconnection during the CME propagation plays a critical role in destroying the coherent characteristic of a CME flux rope. △ Less

Submitted 22 November, 2023; originally announced November 2023.

Comments: 14 pages, 8 figures, accepted for publication in A&A

Data-driven Modeling of a Coronal Magnetic Flux Rope: from Birth to Death

Authors: J. H. Guo, Y. W. Ni, Y. Guo, C. Xia, B. Schmieder, S. Poedts, Z. Zhong, Y. H. Zhou, F. Yu, P. F. Chen

Abstract: Magnetic flux ropes are a bundle of twisted magnetic field lines produced by internal electric currents, which are responsible for solar eruptions and are the major drivers of geomagnetic storms. As such, it is crucial to develop a numerical model that can capture the entire evolution of a flux rope, from its birth to death, in order to predict whether adverse space weather events might occur or n… ▽ More Magnetic flux ropes are a bundle of twisted magnetic field lines produced by internal electric currents, which are responsible for solar eruptions and are the major drivers of geomagnetic storms. As such, it is crucial to develop a numerical model that can capture the entire evolution of a flux rope, from its birth to death, in order to predict whether adverse space weather events might occur or not. In this paper, we develop a data-driven modeling that combines a time-dependent magneto-frictional approach with a thermodynamic magnetohydrodynamic model. Our numerical modeling successfully reproduces the formation and confined eruption of an observed flux rope, and unveils the physical details behind the observations. Regarding the long-term evolution of the active region, our simulation results indicate that the flux cancellation due to collisional shearing plays a critical role in the formation of the flux rope, corresponding to a substantial increase in magnetic free energy and helicity. Regarding the eruption stage, the deformation of the flux rope during its eruption can cause an increase in the downward tension force, which suppresses it from further rising. This finding may shed light on why some torus-unstable flux ropes lead to failed eruptions after large-angle rotations. Moreover, we find that twisted fluxes can accumulate during the confined eruptions, which would breed the subsequent eruptive flares. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Comments: 30 pages, 10 figures, Accepted for ApJ

Toroidal Miller-Turner and Soloviev CME models in EUHFORIA: I. Implementation

Authors: L. Linan, A. Maharana, S. Poedts, B. Schmieder, R. Keppens

Abstract: The aim of this paper is to present the implementation of two new CME models in the space weather forecasting tool, EUHFORIA. We introduce the two toroidal CME models analytically, along with their numerical implementation in EUHFORIA. One model is based on the modified Miller-Turner (mMT) solution, while the other is derived from the Soloviev equilibrium, a specific solution of the Grad-Shafranov… ▽ More The aim of this paper is to present the implementation of two new CME models in the space weather forecasting tool, EUHFORIA. We introduce the two toroidal CME models analytically, along with their numerical implementation in EUHFORIA. One model is based on the modified Miller-Turner (mMT) solution, while the other is derived from the Soloviev equilibrium, a specific solution of the Grad-Shafranov equation. The magnetic field distribution in both models is provided in analytic formulae, enabling a swift numerical computation. After detailing the differences between the two models, we present a collection of thermodynamic and magnetic profiles obtained at Earth using these CME solutions in EUHFORIA with a realistic solar wind background. Subsequently, we explore the influence of their initial parameters on the time profiles at L1. In particular, we examine the impact of the initial density, magnetic field strength, velocity, and minor radius. In EUHFORIA, we obtained different thermodynamic and magnetic profiles depending on the CME model used. We found that changing the initial parameters affects both the amplitude and the trend of the time profiles. For example, using a high initial speed results in a fast evolving and compressed magnetic structure. The speed of the CME is also linked to the strength of the initial magnetic field due to the contribution of the Lorentz force on the CME expansion. However, increasing the initial magnetic field also increases the computation time. Finally, the expansion and integrity of the magnetic structure can be controlled via the initial density of the CME. Both toroidal CME models are successfully implemented in EUHFORIA and can be utilized to predict the geo-effectiveness of the impact of real CME events. Moreover, the current implementation could be easily modified to model other toroidal magnetic configurations. △ Less

Submitted 26 October, 2023; originally announced October 2023.

Identifying Footpoints of Pre-eruptive and Coronal Mass Ejection Flux Ropes with Sunspot Scars

Authors: Chen Xing, Guillaume Aulanier, Brigitte Schmieder, Xin Cheng, Mingde Ding

Abstract: The properties of pre-eruptive structures and coronal mass ejections (CMEs) are characterized by those of their footpoints, the latter of which thus attract great interest. However, how to identify the footpoints of pre-eruptive structures and how to identify the footpoints with ground-based instruments, still remain elusive. In this work, we study an arc-shaped structure intruding in the sunspot… ▽ More The properties of pre-eruptive structures and coronal mass ejections (CMEs) are characterized by those of their footpoints, the latter of which thus attract great interest. However, how to identify the footpoints of pre-eruptive structures and how to identify the footpoints with ground-based instruments, still remain elusive. In this work, we study an arc-shaped structure intruding in the sunspot umbra. It is located close to the (pre-)eruptive flux rope footpoint and is thus expected to help identify the footpoint. We analyse this arc-shaped structure, which we name as "sunspot scar", in a CME event on 2012 July 12 and in two CME events in observationally-inspired MHD simulations performed by OHM and MPI-AMRVAC. The sunspot scar has a more inclined magnetic field with a weaker vertical component and a stronger horizontal component relative to that in the surrounding umbra and manifests as a light bridge in the white light passband. The hot field lines anchored in the sunspot scar are spatially at the transition between the flux rope and the background coronal loops, and temporally in the process of the slipping reconnection which builds up the flux rope. The sunspot scar and its related light bridge mark the edge of the CME flux rope footpoint, and especially, the edge of the pre-eruptive flux rope footpoint in the framework of "pre-eruptive structures being flux ropes". Therefore, they provide a new perspective for the identification of pre-eruptive and CME flux rope footpoints, and also new methods for studying the properties and evolution of pre-eruptive structures and CMEs with photospheric observations only. △ Less

Submitted 20 October, 2023; originally announced October 2023.

Comments: 25 pages, 14 figures, accepted for publication in Astronomy & Astrophysics

Observational Characteristics of solar EUV waves

Authors: Ramesh Chandra, Pooja Devi, P. F. Chen, Brigitte Schmieder, Reetika Joshi, Bhuwan Joshi, Arun Kumar Awasthi

Abstract: Extreme-ultraviolet (EUV) waves are one of the large-scale phenomena on the Sun. They are defined as large propagating fronts in the low corona with speeds ranging from a few tens km/s to a multiple of 1000 km/s. They are often associated with solar filament eruptions, flares, or coronal mass ejections (CMEs). EUV waves show different features, such as, wave and nonwave components, stationary fron… ▽ More Extreme-ultraviolet (EUV) waves are one of the large-scale phenomena on the Sun. They are defined as large propagating fronts in the low corona with speeds ranging from a few tens km/s to a multiple of 1000 km/s. They are often associated with solar filament eruptions, flares, or coronal mass ejections (CMEs). EUV waves show different features, such as, wave and nonwave components, stationary fronts, reflection, refraction, and mode conversion. Apart from these, they can hit the nearby coronal loops and filaments/prominences during their propagation and trigger them to oscillate. These oscillating loops and filaments/prominences enable us to diagnose coronal parameters such as the coronal magnetic field strength. In this article, we present the different observed features of the EUV waves along with existing models. △ Less

Submitted 19 October, 2023; originally announced October 2023.

Comments: 10 pages, 3 figures, 3rd BINA workshop proceeding

Two-horn quiescent prominence observed in H-alpha and MgII h&k lines with THEMIS and IRIS

Authors: Krzysztof Barczynski, Brigitte Schmieder, Bernard Gelly, Aaron W. Peat, Nicolas Labrosse

Abstract: Prominences are large magnetic structures in the corona filled by cool plasma with fast evolving fine structure. We aim to better understand the plasma conditions in the fine structure of a quiescent prominence including two transient horns observed at the bottom of the cavity using the high-resolution spectrograph IRIS and the MulTi-Raies (MTR) spectrograph of the THEMIS in the Canary Islands. We… ▽ More Prominences are large magnetic structures in the corona filled by cool plasma with fast evolving fine structure. We aim to better understand the plasma conditions in the fine structure of a quiescent prominence including two transient horns observed at the bottom of the cavity using the high-resolution spectrograph IRIS and the MulTi-Raies (MTR) spectrograph of the THEMIS in the Canary Islands. We analysed the spectra obtained in H-alpha by THEMIS and MgII by IRIS and compare them with a grid of 23940 1D radiative transfer models which include a prominence-to-corona transition region (PCTR). The full observed profiles of MgII in each pixel are fitted completely by synthesised profiles with xRMS (Cross RMS; an improved version of the rolling root mean square (rRMS) method). When the RMS is below a certain threshold value, we recover the plasma conditions from the parameters of the model best fitting the observed line profile. This criterion is met in two regions (the horns and edge of the prominence) where the line profiles can generally be described as single peaked. The 1D models suggest that two different kinds of model atmospheres correspond to these two regions. The region at the edge is found to be fitted mainly with isothermal and isobaric models, while the other area (the horns) is seen to be fitted with models with a PCTR that have optical thicknesses <5. In the prominence edge, the theoretical relationship between the integrated intensities in H-alpha and MgII is verified and corresponds to low emission measure values. In these regions the electron density is ~10^10 cm^{-3}, while it is one order of magnitude less in the horn regions. In the horns, we find some profiles are best fitted with models with high mean temperatures. This suggests that the hot PCTR found in the horns could be interpreted as prominence plasma in condensation phase at the bottom of the coronal cavity. △ Less

Submitted 24 September, 2023; originally announced September 2023.

Comments: 24 pages, 19 figures, manuscript accepted to publication in A&A

Journal ref: A&A 680, A63 (2023)

Understanding the Lateral Drifting of an Erupting Filament with a Data-constrained Magnetohydrodynamic Simulation

Authors: Jinhan Guo, Ye Qiu, Yiwei Ni, Yang Guo, Chuan Li, Yuhang Gao, Brigitte Schmieder, Stefaan Poedts, Pengfei Chen

Abstract: Solar filaments often exhibit rotation and deflection during eruptions, which would significantly affect the geoeffectiveness of the corresponding coronal mass ejections (CMEs). Therefore, understanding the mechanisms that lead to such rotation and lateral displacement of filaments is a great concern to space weather forecasting. In this paper, we examine an intriguing filament eruption event obse… ▽ More Solar filaments often exhibit rotation and deflection during eruptions, which would significantly affect the geoeffectiveness of the corresponding coronal mass ejections (CMEs). Therefore, understanding the mechanisms that lead to such rotation and lateral displacement of filaments is a great concern to space weather forecasting. In this paper, we examine an intriguing filament eruption event observed by the Chinese Hα Solar Explorer (CHASE) and the Solar Dynamics Observatory (SDO). The filament, which eventually evolves into a CME, exhibits significant lateral drifting during its rising. Moreover, the orientation of the CME flux rope axis deviates from that of the pre-eruptive filament observed in the source region. To investigate the physical processes behind these observations, we perform a data-constrained magnetohydrodynamic (MHD) simulation. Many prominent observational features in the eruption are reproduced by our numerical model, including the morphology of the eruptive filament, eruption path, and flare ribbons. The simulation results reveal that the magnetic reconnection between the flux-rope leg and neighboring low-lying sheared arcades may be the primary mechanism responsible for the lateral drifting of the filament material. Such a reconnection geometry leads to flux-rope footpoint migration and a reconfiguration of its morphology. As a consequence, the filament material hosted in the flux rope drifts laterally, and the CME flux rope deviates from the pre-eruptive filament. This finding underscores the importance of external magnetic reconnection in influencing the orientation of a flux rope axis during eruption. △ Less

Submitted 17 August, 2023; originally announced August 2023.

Comments: 25 pages, 14 figures, Accepted for publication in ApJ

Impact of the solar activity on the propagation of ICMEs: Simulations of hydro, magnetic and median ICMEs at minimum and maximum of activity

Authors: Barbara Perri, Brigitte Schmieder, Pascal Démoulin, Stefaan Poedts, Florian Regnault

Abstract: The propagation of Interplanetary Coronal Mass Ejections (ICMEs) in the heliosphere is influenced by many physical phenomena, related to the internal structure of the ICME and its interaction with the ambient solar wind and magnetic field. As the solar magnetic field is modulated by the 11-year dynamo cycle, our goal is to perform a theoretical exploratory study to assess the difference of propaga… ▽ More The propagation of Interplanetary Coronal Mass Ejections (ICMEs) in the heliosphere is influenced by many physical phenomena, related to the internal structure of the ICME and its interaction with the ambient solar wind and magnetic field. As the solar magnetic field is modulated by the 11-year dynamo cycle, our goal is to perform a theoretical exploratory study to assess the difference of propagation of an ICME in typical minimum and maximum activity backgrounds. We define a median representative CME at 0.1~au, using both observations and numerical simulations, and describe it using a spheromak model. We use the heliospheric propagator European Heliospheric FORecasting Information Asset (EUHFORIA) to inject the same ICME in two different background wind environments. We then study how the environment and the internal CME structure impact the propagation of the ICME towards Earth, by comparison with an unmagnetized CME. At minimum of activity, the structure of the heliosphere around the ecliptic causes the ICME to slow down, creating a delay with the polar parts of the ejecta. This delay is more important if the ICME is faster. At maximum of activity, a southern coronal hole causes a northward deflection. For these cases, we always find that the ICME at maximum of activity arrives first, while the ICME at minimum of activity is actually more geo-effective. The helicity sign of the ICME is also a crucial parameter but at minimum of activity only, since it affects the magnetic profile and the arrival time of up to 8 hours. △ Less

Submitted 27 June, 2023; originally announced June 2023.

Comments: 25 pages, 16 figures, accepted in ApJ

Rotation and interaction of the September 8 and 10, 2014 CMEs tested with EUHFORIA

Authors: Anwesha Maharana, Camilla Scolini, Brigitte Schmieder, Stefaan Poedts

Abstract: Solar coronal mass ejections (CMEs) can catch up and interact with preceding CMEs and solar wind structures to undergo rotation and deflection during their propagation. We aim to show how interactions undergone by a CME in the corona and heliosphere can play a significant role in altering its geoeffectiveness predicted at the time of its eruption. We consider a case study of two successive CMEs la… ▽ More Solar coronal mass ejections (CMEs) can catch up and interact with preceding CMEs and solar wind structures to undergo rotation and deflection during their propagation. We aim to show how interactions undergone by a CME in the corona and heliosphere can play a significant role in altering its geoeffectiveness predicted at the time of its eruption. We consider a case study of two successive CMEs launched from the active region NOAA 12158 in early September 2014. The second CME was predicted to be extensively geoeffective based on the remote-sensing observations of the source region. However, in situ measurements at 1~au recorded only a short-lasting weak negative Bz component followed by a prolonged positive Bz component. The EUropean Heliosphere FORecasting Information Asset (EUHFORIA) is used to perform a self-consistent 3D MHD simulation of the two CMEs in the heliosphere. The initial conditions of the CMEs are determined by combining observational insights near the Sun, fine-tuned to match the in situ observations near 1~au, and additional numerical experiments of each individual CME. By introducing CME1 before CME2 in the EUHFORIA simulation, we modelled the negative Bz component in the sheath region ahead of CME2 whose formation can be attributed to the interaction between CME1 and CME2. To reproduce the positive Bz component in the magnetic ejecta of CME2, we had to initialise CME2 with an orientation determined at 0.1~au and consistent with the orientation interpreted at 1~au, instead of the orientation observed during its eruption. EUHFORIA simulations suggest the possibility of a significant rotation of CME2 in the low corona in order to explain the in situ observations at 1~au. Coherent magnetic field rotations, potentially geoeffective, can be formed in the sheath region as a result of CME-CME interactions in the heliosphere even if the individual CMEs are not geoeffective. △ Less

Submitted 11 May, 2023; originally announced May 2023.

Comments: The paper is accepted in A&A journal for publication on May 5, 2023

Journal ref: A&A 675, A136 (2023)

Self-consistent propagation of flux ropes in realistic coronal simulations

Authors: L. Linan, F. Regnault, B. Perri, M. Brchnelova, B. Kuzma, A. Lani, S. Poedts, B. Schmieder

Abstract: The aim of this paper is to demonstrate the possible use of the new coronal model COCONUT to compute a detailed representation of a numerical CME at 0.1~AU, after its injection at the solar surface and propagation in a realistic solar wind, as derived from observed magnetograms. We present the implementation and propagation of modified Titov-Démoulin (TDm) flux ropes in the COCONUT 3D MHD coronal… ▽ More The aim of this paper is to demonstrate the possible use of the new coronal model COCONUT to compute a detailed representation of a numerical CME at 0.1~AU, after its injection at the solar surface and propagation in a realistic solar wind, as derived from observed magnetograms. We present the implementation and propagation of modified Titov-Démoulin (TDm) flux ropes in the COCONUT 3D MHD coronal model. The background solar wind is reconstructed in order to model two opposite configurations representing a solar activity maximum and minimum respectively. Both were derived from magnetograms which were obtained by the Helioseismic and Magnetic Imager (HMI) onboard the Solar Dynamic Observatory (SDO) satellite. We track the propagation of 24 flux ropes, which differ only by their initial magnetic flux. We especially investigate the geometry of the flux rope during the early stages of the propagation as well as the influence of its initial parameters and solar wind configuration on 1D profiles derived at 0.1~AU. At the beginning of the propagation, the shape of the flux ropes varies between simulations during low and high solar activity. We find dynamics that are consistent with the standard CME model, such as the pinching of the legs and the appearance of post-flare loops. Despite the differences in geometry, the synthetic density and magnetic field time profiles at 0.1~AU are very similar in both solar wind configurations. These profiles are similar to those observed further in the heliosphere and suggest the presence of a magnetic ejecta composed of the initially implemented flux rope and a sheath ahead of it. Finally, we uncover relationships between the properties of the magnetic ejecta, such as density or speed and the initial magnetic flux of our flux ropes. △ Less

Submitted 3 May, 2023; originally announced May 2023.

Comments: 20 pages, 13 figures

Journal ref: A&A 675, A101 (2023)

Simulation of a Solar Jet Formed from an Untwisting Flux Rope Interacting with a Null Point

Authors: Jiahao Zhu, Yang Guo, Mingde Ding, Brigitte Schmieder

Abstract: Coronal jets are eruptions identified by a collimated, sometimes twisted spire. They are small-scale energetic events compared with flares. Using multi-wavelength observations from the Solar Dynamics Observatory/Atmospheric Imaging Assembly (SDO/AIA) and a magnetogram from Hinode/Spectro-Polarimeter (Hinode/SP), we study the formation and evolution of a jet occurring on 2019 March 22 in the active… ▽ More Coronal jets are eruptions identified by a collimated, sometimes twisted spire. They are small-scale energetic events compared with flares. Using multi-wavelength observations from the Solar Dynamics Observatory/Atmospheric Imaging Assembly (SDO/AIA) and a magnetogram from Hinode/Spectro-Polarimeter (Hinode/SP), we study the formation and evolution of a jet occurring on 2019 March 22 in the active region NOAA 12736. A zero-$β$ magnetohydrodynamic (MHD) simulation is conducted to probe the initiation mechanisms and appearance of helical motion during this jet event. As the simulation reveals, there are two pairs of field lines at the jet base, indicating two distinct magnetic structures. One structure outlines a flux rope lying low above the photosphere in the north of a bald patch region and the other structure shows a null point high in the corona in the south. The untwisting motions of the observed flux rope was recovered by adding an anomalous (artificial) resistivity in the simulation. A reconnection occurs at the bald patch in the flux rope structure, which is moving upwards and simultaneously encounters the field lines of the null point structure. The interaction of the two structures results in the jet while the twist of the flux rope is transferred to the jet by the reconnected field lines. The rotational motion of the flux rope is proposed to be an underlying trigger of this process and responsible for helical motions in the jet spire. △ Less

Submitted 31 March, 2023; originally announced March 2023.

Comments: 17pages, 9 figures. Accepted for publication in The Astrophysical Journal

Thermodynamic and Magnetic Topology Evolution of the X1.0 Flare on 2021 October 28 Simulated by a Data-driven Radiative Magnetohydrodynamic Model

Authors: Jin-han Guo, Yi-wei Ni, Ze Zhong, Yang Guo, Chun Xia, Hai-tang Li, Stefaan Poedts, Brigitte Schmieder, Peng-fei Chen

Abstract: Solar filament eruptions, flares and coronal mass ejections (CMEs) are manifestations of drastic release of energy in the magnetic field, which are related to many eruptive phenomena from the Earth magnetosphere to black hole accretion disks. With the availability of high-resolution magnetograms on the solar surface, observational data-based modelling is a promising way to quantitatively study the… ▽ More Solar filament eruptions, flares and coronal mass ejections (CMEs) are manifestations of drastic release of energy in the magnetic field, which are related to many eruptive phenomena from the Earth magnetosphere to black hole accretion disks. With the availability of high-resolution magnetograms on the solar surface, observational data-based modelling is a promising way to quantitatively study the underlying physical mechanisms behind observations. By incorporating thermal conduction and radiation losses in the energy equation, we develop a new data-driven radiative magnetohydrodynamic (MHD) model, which has the capability to capture the thermodynamic evolution compared to our previous zero-\b{eta} model. Our numerical results reproduce major observational characteristics of the X1.0 flare on 2021 October 28 in NOAA active region (AR) 12887, including the morphology of the eruption, kinematic of flare ribbons, extreme-ultraviolet (EUV) radiations, and two components of the EUV waves predicted by the magnetic stretching model, i.e., a fast-mode shock wave and a slower apparent wave due to successive stretching of magnetic field lines. Moreover, some intriguing phenomena are revealed in the simulation. We find that flare ribbons separate initially and ultimately stop at the outer stationary quasi-separatrix layers (QSLs). Such outer QSLs correspond to the border of the filament channel and determine the final positions of flare ribbons, which can be used to predict the size and the lifetime of a flare before it occurs. In addition, the side view of the synthesized EUV and white-light images exhibit typical three-part structures of CMEs, where the bright leading front is roughly cospatial with the non-wave component of the EUV wave, reinforcing the magnetic stretching model for the slow component of EUV waves. △ Less

Submitted 24 March, 2023; originally announced March 2023.

Comments: 46 pages, 15 figures, accepted for publication in The Astrophysical Journal Supplement

Interaction of solar jets with filaments: Triggering of large-amplitude filament oscillations

Authors: Reetika Joshi, Manuel Luna, Brigitte Schmieder, Fernando Moreno-Insertis, Ramesh Chandra

Abstract: Large-amplitude oscillations (LAOs) are often detected in filaments. Using multiwavelength observations, their origin can be traced back to the interaction with eruptions and jets. We present two different case studies as observational evidence in support of 2.5D MHD numerical experiments that show that the LAOs in the filament channels can be initiated by solar jets. In the two studied events, we… ▽ More Large-amplitude oscillations (LAOs) are often detected in filaments. Using multiwavelength observations, their origin can be traced back to the interaction with eruptions and jets. We present two different case studies as observational evidence in support of 2.5D MHD numerical experiments that show that the LAOs in the filament channels can be initiated by solar jets. In the two studied events, we can identify a quadrupolar configuration with an X-point at the top of the parasitic region suggestive of a classical null-point. A reconnection flow emanates from this structure leading to a jet that propagates along the filament channel. In both cases we can identify the quiescent and eruptive phases of the jet. The triggered LAOs have periods of around 70-80 minutes and are damped after a few oscillations. The minimum magnetic field intensity inferred with seismology for the filament turns out to be around 30 Gauss. We conclude that the two case studies are consistent with the recent numerical model of Luna and Moreno-Insertis (2021), in which the LAOs are initiated by jets. The relationship between the onset of the jet and filament oscillations is straight-forward for the first case and less for the second case. In the second event, although there is some evidence, we cannot rule out other possibilities such as activity unrelated to the null-point or changes in the magnetic structure of the filament. Both jets are associated with very weak flares which did not launch any EUV wave. Therefore the role of EUV waves for triggering the filament oscillations can be eliminated for these two case. △ Less

Submitted 30 January, 2023; originally announced January 2023.

Comments: 12 pages, 13 figures, Accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 672, A15 (2023)

Extreme-Ultraviolet Wave and Accompanying Loop Oscillations

Authors: Pooja Devi, Ramesh Chandra, Arun Kumar Awasthi, Brigitte Schmieder, Reetika Joshi

Abstract: We present the observations of an extreme-ultraviolet (EUV) wave, which originated from the active region (AR) NOAA 12887 on 28 October 2021 and its impact on neighbouring loops. The event was observed by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO) satellite at various wavebands and by the Solar TErrestrial RElations Observatory-Ahead (STEREO-A) with its Ex… ▽ More We present the observations of an extreme-ultraviolet (EUV) wave, which originated from the active region (AR) NOAA 12887 on 28 October 2021 and its impact on neighbouring loops. The event was observed by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO) satellite at various wavebands and by the Solar TErrestrial RElations Observatory-Ahead (STEREO-A) with its Extreme-Ultraviolet Imager (EUVI) and COR1 instruments with a different view angle than SDO. We show that the EUV wave event consists of several waves as well as non-wave phenomena. The wave components include: the fast-mode part of the EUV wave event, creation of oscillations in nearby loops, and the appearance of wave trains. The non-wave component consists of stationary fronts. We analyze selected oscillating loops and find that the periods of these oscillations range from 230 - 549 s. Further, we compute the density ratio inside and outside the loops and the magnetic field strength. The computed density ratio and magnetic field are found in the range of 1.08 - 2.92 and 5.75 - 8.79 G, respectively. Finally, by combining SDO and STEREO-A observations, we find that the observed EUV wave component propagates ahead of the CME leading edge. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Comments: 27 pages, 11 figures

Prominence fine structures in weakly twisted and highly twisted magnetic flux ropes

Authors: J. H. Guo, Y. W. Ni, Y. H. Zhou, Y. Guo, B. Schmieder, P. F. Chen

Abstract: Many prominences are supported by magnetic flux ropes. One important question is how we can determine whether the flux rope is weakly-twisted or strongly-twisted. In this paper, we attempted to check whether prominences supported by weakly-twisted and strongly-twisted flux ropes can manifest different features so that we might distinguish the two types of magnetic structures by their appearance. W… ▽ More Many prominences are supported by magnetic flux ropes. One important question is how we can determine whether the flux rope is weakly-twisted or strongly-twisted. In this paper, we attempted to check whether prominences supported by weakly-twisted and strongly-twisted flux ropes can manifest different features so that we might distinguish the two types of magnetic structures by their appearance. We performed pseudo three-dimensional simulations of two magnetic flux ropes with different twists. We found that the resulting two prominences differ in many aspects. The prominence supported by a weakly-twisted flux rope is composed mainly of transient threads, forming high-speed flows inside the prominence. Its horns are evident. Conversely, the one supported by a highly-twisted flux rope consists mainly of stable quasi-stationary threads, including longer independently trapped threads and shorter magnetically connected threads. It is also revealed that the prominence spine deviates from the flux rope axis in the vertical direction and from the photospheric polarity inversion line projected on the solar surface, especially for the weakly-twisted magnetic flux rope. The two types of prominences differ significantly in appearance. It is also suggested that a piling-up of short threads in highly-twisted flux ropes might account for the vertical-like threads in some prominences. △ Less

Submitted 14 September, 2022; originally announced September 2022.

Comments: 10 pages, 7 figures, accepted for publication in A&A

Journal ref: A&A 667, A89 (2022)

Fan-shaped jet close to a light bridge

Authors: Y. Liu, G. P. Ruan, B. Schmieder, S. Masson, Y. Chen, J. T. Su, B. Wang, X. Y. Bai, Y. Su, Wenda Cao

Abstract: On the Sun,jets in light bridges are frequently observed with high-resolution instruments.The respective roles played by convection and the magnetic field in triggering such jets are not yet clear.We report a small fan-shaped jet along a LB observed by the 1.6m Goode Solar Telescope(GST) with the TiO Broadband Filter Imager(BFI),the Visible Imaging Spectrometer(VIS) in Hα,and the Near-InfraRed Ima… ▽ More On the Sun,jets in light bridges are frequently observed with high-resolution instruments.The respective roles played by convection and the magnetic field in triggering such jets are not yet clear.We report a small fan-shaped jet along a LB observed by the 1.6m Goode Solar Telescope(GST) with the TiO Broadband Filter Imager(BFI),the Visible Imaging Spectrometer(VIS) in Hα,and the Near-InfraRed Imaging Spectropolarimeter(NIRIS),along with the Stokes parameters.The high spatial and temporal resolution of those instruments allowed us to analyze the features identified during the jet event.By constructing the Hα Dopplergrams,we found that the plasma is first moving upward,whereas during the second phase of the jet,the plasma is flowing back.Working with time slice diagrams,we investigated the propagation-projected speed of the fan and its bright base.The fan-shaped jet developed within a few minutes,with diverging beams. At its base,a bright point was slipping along the LB and ultimately invaded the umbra of the sunspot.The Hα profiles of the bright points enhanced the intensity in the wings, similarly to the case of Ellerman bombs.Co-temporally,the extreme ultraviolet brightenings developed at the front of the dark material jet and moved at the same speed as the fan, leading us to propose that the fan-shaped jet material compressed and heated the ambient plasma at its extremities in the corona.Our multi-wavelength analysis indicates that the fan-shaped jet could result from magnetic reconnection across the highly diverging field low in the chromosphere,leading to an apparent slipping motion of the jet material along the LB.However,we did not find any opposite magnetic polarity at the jet base,as would typically be expected in such a configuration.We therefore discuss other plausible physical mechanisms,based on waves and convection, that may have triggered the event. △ Less

Submitted 26 July, 2022; originally announced July 2022.

Comments: 10 pages, 7 figures

Journal ref: A&A 667, A24 (2022)

Over-expansion of coronal mass ejections modelled using 3D MHD EUHFORIA simulations

Authors: C. Verbeke, B. Schmieder, P. Démoulin, S. Dasso, B. Grison, E. Samara, C. Scolini, S. Poedts

Abstract: Coronal mass ejections (CMEs) are large scale eruptions observed close to the Sun. They are travelling through the heliosphere and possibly interacting with the Earth environment creating interruptions or even damaging new technology instruments. Most of the time their physical conditions (velocity, density, pressure) are only measured in situ at one point in space, with no possibility to have inf… ▽ More Coronal mass ejections (CMEs) are large scale eruptions observed close to the Sun. They are travelling through the heliosphere and possibly interacting with the Earth environment creating interruptions or even damaging new technology instruments. Most of the time their physical conditions (velocity, density, pressure) are only measured in situ at one point in space, with no possibility to have information on the variation of these parameters during their journey from Sun to Earth. Our aim is to understand the evolution of internal physical parameters of a set of three particular fast halo CMEs. These CMEs were launched between 15 and 18 July 2002. Surprisingly, the related interplanetary CMEs (ICMEs), observed near Earth, have a low, and in one case even very low, plasma density. We use the EUropean Heliosphere FORecasting Information Asset (EUHFORIA) model to simulate the propagation of the CMEs in the background solar wind by placing virtual spacecraft along the Sun--Earth line. We set up the initial conditions at 0.1 au, first with a cone model and then with a linear force free spheromak model. A relatively good agreement between simulation results and observations concerning the speed, density and arrival times of the ICMEs is obtained by adapting the initial CME parameters. In particular, this is achieved by increasing the initial magnetic pressure so that a fast expansion is induced in the inner heliosphere. This implied the develop First, we show that a magnetic configuration with an out of force balance close to the Sun mitigates the EUHFORIA assumptions related to an initial uniform velocity. Second, the over-expansion of the ejected magnetic configuration in the inner heliosphere is one plausible origin for the low density observed in some ICMEs at 1 au. The in situ observed very low density has a possible coronal origin of fast expansion for two of the three ICMEs. △ Less

Submitted 7 July, 2022; originally announced July 2022.

Comments: 20 pages

Analysis of the Evolution of a Multi-Ribbon Flare and Failed Filament Eruption

Authors: Reetika Joshi, Cristina H. Mandrini, Ramesh Chandra, Brigitte Schmieder, Germán D. Cristiani, Cecilia Mac Cormack, Pascal Démoulin, Hebe Cremades

Abstract: How filaments form and erupt are topics about which solar researchers have wondered since more than a century and that are still open to debate. We present observations of a filament formation, its failed eruption, and the associated flare (SOL2019-05-09T05:51) that occurred in active region (AR) 12740 using data from SDO, STEREO-A, IRIS, and NSO/GONG. AR 12740 was a decaying region formed by a ve… ▽ More How filaments form and erupt are topics about which solar researchers have wondered since more than a century and that are still open to debate. We present observations of a filament formation, its failed eruption, and the associated flare (SOL2019-05-09T05:51) that occurred in active region (AR) 12740 using data from SDO, STEREO-A, IRIS, and NSO/GONG. AR 12740 was a decaying region formed by a very disperse following polarity and a strong leading spot, surrounded by a highly dynamic zone where moving magnetic features (MMFs) were seen constantly diverging from the spot. Our analysis indicates that the filament was formed by the convergence of fibrils at a location where magnetic flux cancellation was observed. Furthermore, we conclude that its destabilization was also related to flux cancellation associated to the constant shuffling of the MMFs. A two-ribbon flare occurred associated to the filament eruption; however, because the large-scale magnetic configuration of the AR was quadrupolar, two additional flare ribbons developed far from the two main ones. We model the magnetic configuration of the AR using a force-free field approach at the AR scale size. This local model is complemented by a global potential-field source-surface one. Based on the local model, we propose a scenario in which the filament failed eruption and flare are due to two reconnection processes, one occurring below the erupting filament, leading to the two-ribbon flare, and another one above it between the filament flux-rope configuration and the large-scale closed loops. Our computation of the reconnected magnetic flux added to the erupting flux rope, compared to that of the large-scale field overlying it, lets us conclude that the latter was large enough to prevent the filament eruption. A similar conjecture can be drawn from the computation of the magnetic tension derived from the global field model. △ Less

Submitted 1 June, 2022; originally announced June 2022.

Comments: 32 pages, 17 figures, Accepted for publication in Solar Physics

Chromospheric recurrent jets in a sunspot group and their inter-granular origin

Authors: Jie Zhao, Jiangtao Su, Xu Yang, Hui Li, Brigitte Schmieder, Kwangsu Ahn, Wenda Cao

Abstract: We report on high resolution observations of recurrent fan-like jets by the Goode Solar telescope (GST) in multi-wavelengths inside a sunspot group. The dynamics behaviour of the jets is derived from the Ha line profiles. Quantitative values for one well-identified event have been obtained showing a maximum projected velocity of 42 km s^-1 and a Doppler shift of the order of 20 km s^-1. The footpo… ▽ More We report on high resolution observations of recurrent fan-like jets by the Goode Solar telescope (GST) in multi-wavelengths inside a sunspot group. The dynamics behaviour of the jets is derived from the Ha line profiles. Quantitative values for one well-identified event have been obtained showing a maximum projected velocity of 42 km s^-1 and a Doppler shift of the order of 20 km s^-1. The footpoints/roots of the jets have a lifted center on the Ha line profile compared to the quiet sun suggesting a long lasting heating at these locations. The magnetic field between the small sunspots in the group shows a very high resolution pattern with parasitic polarities along the inter-granular lanes accompanied by high velocity converging flows (4 km s^-1) in the photosphere. Magnetic cancellations between the opposite polarities are observed in the vicinity of the footpoints of the jets. Along the inter-granular lanes horizontal magnetic field around 1000 Gauss is generated impulsively. Overall, all the kinetic features at the different layers through photosphere and chromosphere favor a convection-driven reconnection scenario for the recurrent fan-like jets, and evidence a site of reconnection between the photosphere and chromosphere corresponding to the inter-granular lanes. △ Less

Submitted 14 May, 2022; originally announced May 2022.

Comments: to be published in ApJ

Prominence Oscillations activated by an EUV wave

Authors: Pooja Devi, Ramesh Chandra, Reetika Joshi, P. F. Chen, Brigitte Schmieder, Wahab Uddin, Yong-Jae Moon

Abstract: Prominence oscillations are one of interesting phenomena in the solar atmosphere, which can be utilized to infer the embedded magnetic field magnitude. We present here the transverse oscillations of two different prominences located at the East solar limb on 2011 February 11 using the multi-wavebands data of the Atmospheric Imaging Assembly (AIA) on-board the Solar Dynamics Observatory (SDO) satel… ▽ More Prominence oscillations are one of interesting phenomena in the solar atmosphere, which can be utilized to infer the embedded magnetic field magnitude. We present here the transverse oscillations of two different prominences located at the East solar limb on 2011 February 11 using the multi-wavebands data of the Atmospheric Imaging Assembly (AIA) on-board the Solar Dynamics Observatory (SDO) satellite. A prominence eruption was observed towards the east direction with an average speed of ~275 km/s. The eruption is fitted with the combination of a linear and an exponential functions of time. An extreme ultraviolet (EUV) wave event was associated with the prominence eruption. This EUV wave triggered the oscillations of both prominences on the East limb. We computed the period of each prominence using the wavelet analysis method. The oscillation period varies from 14 to 22 min. The magnetic field of the prominences was derived, which ranges from 14 to 20 G. △ Less

Submitted 26 February, 2022; originally announced February 2022.

Comments: 8 pages, 4 figures

First High Resolution Interferometric Observation of a Solar Prominence With ALMA

Authors: Nicolas Labrosse, Andrew S. Rodger, Krzysztof Radziszewski, Paweł Rudawy, Patrick Antolin, Lyndsay Fletcher, Peter J. Levens, Aaron W. Peat, Brigitte Schmieder, Paulo J. A. Simões

Abstract: We present the first observation of a solar prominence at $84-116$ GHz using the high resolution interferometric imaging of ALMA. Simultaneous observations in H$α$ from Białkaw Observatory and with SDO/AIA reveal similar prominence morphology to the ALMA observation. The contribution functions of 3 mm and H$α$ emission are shown to have significant overlap across a range of gas pressures. We estim… ▽ More We present the first observation of a solar prominence at $84-116$ GHz using the high resolution interferometric imaging of ALMA. Simultaneous observations in H$α$ from Białkaw Observatory and with SDO/AIA reveal similar prominence morphology to the ALMA observation. The contribution functions of 3 mm and H$α$ emission are shown to have significant overlap across a range of gas pressures. We estimate the maximum millimetre-continuum optical thickness to be $τ_\mathrm{3mm}\approx 2$, and the brightness temperature from the observed H$α$ intensity. The brightness temperature measured by ALMA is $\sim 6000-7000$ K in the prominence spine, which correlates well with the estimated brightness temperature for a gas temperature of 8000 K. △ Less

Submitted 24 February, 2022; originally announced February 2022.

Comments: 5 pages, 7 figures

Solar jets: SDO and IRIS observations in the perspective of new MHD simulations

Authors: Brigitte Schmieder

Abstract: Solar jets are observed as collimated plasma beams over a large range of temperatures and wavelengths. They have been observed in Halpha and optical lines for more than 50 years and called surges. The term "jet" comes from X-ray observations after the launch of the Yohkoh satellite in 1991. They are the means of transporting energy through the heliosphere and participate to the corona heating and… ▽ More Solar jets are observed as collimated plasma beams over a large range of temperatures and wavelengths. They have been observed in Halpha and optical lines for more than 50 years and called surges. The term "jet" comes from X-ray observations after the launch of the Yohkoh satellite in 1991. They are the means of transporting energy through the heliosphere and participate to the corona heating and the acceleration of solar wind. Several characteristics have been derived about their velocities, their rates of occurrence, and their relationship with CMEs. However, the initiation mechanism of jets, e.g. emerging flux, flux cancellation, or twist, is still debated. In the last decade coordinated observations of the Interface Region Imaging Spectrograph (IRIS) with the instruments on board the Solar Dynamic Observatory (SDO) allow to make a step forward for understanding the trigger of jets and the relationship between hot jets and cool surges. We observe at the same time the development of 2D and 3D MHD numerical simulations to interpret the results. This paper summarizes recent studies of jets showing the loci of magnetic reconnection in null points or in bald patch regions forming a current sheet. In the pre-jet phase a twist is frequently detected by the existence of a mini filament close to the dome of emerging flux. The twist can also be transferred to the jet from a flux rope in the vicinity of the reconnection by slippage of the polarities. Bidirectional flows are detected at the reconnection sites. We show the role of magnetic currents detected in the footprints of flux rope and quasi-separatrix layers for initiating the jets. We select a few studies and show that with the same observations, different interpretations are possible based on different approaches e.g. non linear force free field extrapolation or 3D MHD simulation. △ Less

Submitted 27 January, 2022; originally announced January 2022.

Empirical atmosphere model in a mini flare during magnetic reconnection

Authors: Brigitte Schmieder, Reetika Joshi, Ramesh Chandra, Guillaume Aulanier, Akiko Tei, Petr Heinzel, James Tomin, Nicole Vilmer, Veronique Bommier

Abstract: A spatio-temporal analysis of IRIS spectra of MgII, CII, and SiIV ions allows us to study the dynamics and the stratification of the flare atmosphere along the line of sight during the magnetic reconnection phase at the jet base. Strong asymmetric MgII and CII line profiles with extended blue wings observed at the reconnection site are interpreted by the presence of two chromospheric temperature c… ▽ More A spatio-temporal analysis of IRIS spectra of MgII, CII, and SiIV ions allows us to study the dynamics and the stratification of the flare atmosphere along the line of sight during the magnetic reconnection phase at the jet base. Strong asymmetric MgII and CII line profiles with extended blue wings observed at the reconnection site are interpreted by the presence of two chromospheric temperature clouds: one explosive cloud with blueshifts at 290 km/s and one cloud with smaller Doppler shift (around 36 km/s). Simultaneously at the same location a mini flare was observed with strong emission in multi temperatures (AIA), in several spectral IRIS lines (e.g. Oiv and Siiv, Mgii), absorption of identified chromospheric lines in Siiv line profile, enhancement of the Balmer continuum and X-ray emission by FERMI/GBM. With the standard thick-target flare model we calculate the energy of non thermal electrons observed by FERMI and compare it to the energy radiated by the Balmer continuum emission. We show that the low energy input by non thermal electrons above 20 keV was still sufficient to produce the excess of Balmer continuum. △ Less

Submitted 13 December, 2021; originally announced December 2021.

Comments: 6 pages, 4 figures, Accepted for publications in HVAR proceedings

Solar jets observed with the Interface Region Imaging Spectrograph (IRIS)

Authors: Brigitte Schmieder, Reetika Joshi, Ramesh Chandra

Abstract: Solar jets are impulsive, collimated plasma ejections that are triggered by magnetic reconnection. They are observed for many decades in various temperatures and wavelengths, therefore their kinematic characteristics, such as velocity and recurrence, have been extensively studied.Nevertheless, the high spatial resolution of the Interface Region Imaging Spectrograph (IRIS) launched in 2013 allowed… ▽ More Solar jets are impulsive, collimated plasma ejections that are triggered by magnetic reconnection. They are observed for many decades in various temperatures and wavelengths, therefore their kinematic characteristics, such as velocity and recurrence, have been extensively studied.Nevertheless, the high spatial resolution of the Interface Region Imaging Spectrograph (IRIS) launched in 2013 allowed us to make a step forward in the understanding of the relationship between surges and hot jets. In this paper we report on several results of recent studies of jets observed by IRIS. Cool and hot plasma have been detected with ejections of cool blobs having a speed reaching 300 km/s during the impulsive phase of jet formation and slow velocity surges surrounding hot jets after the reconnection phase. Plasma characteristics of solar jets, such as the emission measure, temperature, and density have been quantified. A multi-layer atmosphere at the reconnection site based on observed IRIS spectra has been proposed. IRIS evidenced bidirectional flows at reconnection sites, and tilt along the spectra which were interpreted as the signature of twist in jets. The search of possible sites for reconnection could be achieved by the analysis of magnetic topology. Combining Solar Dynamics Observatory/Helioseismic Magnetic Imager (SDO/HMI) vector magnetograms and IRIS observations, it was found that reconnection site could be located at null points in the corona as well as in bald patch regions low in the photosphere. In one case study a magnetic sketch could explain the initiation of a jet starting in a bald patch transformed to a current sheet in a dynamical way, and the transfer of twist from a flux rope to the jet during the magnetic reconnection process. △ Less

Submitted 17 November, 2021; originally announced November 2021.

Comments: 11 pages, 6 figures, Accepted for publication in Advances in Space Research (a COSPAR publication)

Filament Eruption Driving EUV Loop Contraction then Expansion above a Stable Filament

Authors: Ramesh Chandra, Pascal Demoulin, Pooja Devi, Reetika Joshi, Brigitte Schmieder

Abstract: We analyze the observations of EUV loop evolution associated with the filament eruption located at the border of an active region. The event SOL2013-03-16T14:00 was observed with a large difference of view point by the Solar Dynamics Observatory and Solar Terrestrial Relations Observatory --A spacecraft. The filament height is fitted with the sum of a linear and exponential function. These two pha… ▽ More We analyze the observations of EUV loop evolution associated with the filament eruption located at the border of an active region. The event SOL2013-03-16T14:00 was observed with a large difference of view point by the Solar Dynamics Observatory and Solar Terrestrial Relations Observatory --A spacecraft. The filament height is fitted with the sum of a linear and exponential function. These two phases point to different physical mechanisms such as: tether-cutting reconnection and a magnetic instability. While no X-ray emission is reported, this event presents the classical eruption features like: separation of double ribbons and the growth of flare loops. We report the migration of the southern foot of the erupting filament flux rope due to the interchange reconnection with encountered magnetic loops of a neighbouring AR. Parallel to the erupting filament, a stable filament remains in the core of active region. The specificity of this eruption is that coronal loops, located above the nearly joining ends of the two filaments, first contract in phase, then expand and reach a new stable configuration close to the one present at the eruption onset. Both contraction and expansion phases last around 20 min. The main difference with previous cases is that the PIL bent about 180 deg around the end of the erupting filament because the magnetic configuration is at least tri-polar. These observations are challenging for models which interpreted previous cases of loop contraction within a bipolar configuration. New simulations are required to broaden the complexity of the configurations studied. △ Less

Submitted 16 September, 2021; originally announced September 2021.

Comments: 32 pages, 9 figures, Accepted for publication in The Astrophysical Journal

Balmer continuum enhancement detected in a mini flare observed with IRIS

Authors: Reetika Joshi, Brigitte Schmieder, Petr Heinzel, James Tomin, Ramesh Chandra, Nicole Vilmer

Abstract: Optical and near-UV continuum emissions in flares contribute substantially to flare energy budget. Two mechanisms play an important role for continuum emission in flares: hydrogen recombination after sudden ionization at chromospheric layers and transportation of the energy radiatively from the chromosphere to lower layers in the atmosphere, the so called back-warming. The aim of the paper is to d… ▽ More Optical and near-UV continuum emissions in flares contribute substantially to flare energy budget. Two mechanisms play an important role for continuum emission in flares: hydrogen recombination after sudden ionization at chromospheric layers and transportation of the energy radiatively from the chromosphere to lower layers in the atmosphere, the so called back-warming. The aim of the paper is to disentangle between these two mechanisms for the excess of Balmer continuum observed in a flare. Methods. We combine the observations of Balmer continuum obtained with IRIS (spectra and SJIs 2832 A) and hard X-ray (HXR) emission detected by FERMI Gamma Burst Monitor (GBM) during a mini flare. Calibrated Balmer continuum is compared to non-LTE radiative transfer flare models and radiated energy is estimated. Assuming thick target HXR emission, we calculate the energy of non-thermal electrons detected by FERMI GBM and compare it to the radiated energy. The favorable argument of a relationship between the Balmer continuum excess and the HXR emission is that there is a good time coincidence between both of them. In addition, the shape of the maximum brightness in the 2832 SJIs, which is mainly due to this Balmer continuum excess, is similar to the FERMI/GBM light curve. The electron-beam flux estimated from FERMI/GBM is consistent with the beam flux required in non-LTE radiative transfer models to get the excess of Balmer continuum emission observed in the IRIS spectra. The low energy input by non thermal electrons above 20 keV is sufficient to produce the enhancement of Balmer continuum emission. This could be explained by the topology of the reconnection site. The reconnection starts in a tiny bald patch region which is transformed dynamically in a X-point current sheet. The size of the interacting region would be under the spatial resolution of the instrument. △ Less

Submitted 24 July, 2021; originally announced July 2021.

Comments: 10 pages, 11 figures, Accepted for publication in Astronomy and Astrophysics

Journal ref: A&A 654, A31 (2021)

Fine Structures of an EUV Wave Event from Multi-Viewpoint Observations

Authors: Ramesh Chandra, P. F. Chen, Pooja Devi, Reetika Joshi, Brigette Schmieder, Yong-Jae Moon Wahab Uddin

Abstract: In this study, we investigate an extreme ultraviolet (EUV) wave event on 2010 February 11, which occurred as a limb event from the Earth viewpoint and a disk event from the STEREO--B viewpoint. We use the data obtained by the Atmospheric Imaging Assembly (AIA) aboard the Solar Dynamics Observatory (SDO) in various EUV channels. The EUV wave event was launched by a partial prominence eruption. Simi… ▽ More In this study, we investigate an extreme ultraviolet (EUV) wave event on 2010 February 11, which occurred as a limb event from the Earth viewpoint and a disk event from the STEREO--B viewpoint. We use the data obtained by the Atmospheric Imaging Assembly (AIA) aboard the Solar Dynamics Observatory (SDO) in various EUV channels. The EUV wave event was launched by a partial prominence eruption. Similar to some EUV wave events in previous works, this EUV wave event contains a faster wave with a speed of $\sim$445$\pm$6 km s$^{-1}$, which we call coronal Moreton wave, and a slower wave with a speed of $\sim$298$\pm$5 km s$^{-1}$, which we call "EIT wave". The coronal Moreton wave is identified as a fast-mode wave and the "EIT wave" is identified as an apparent propagation due to successive field-line stretching. We also observe a stationary front associated with the fast mode EUV wave. This stationary front is explained as mode conversion from the coronal Moreton wave to a slow-mode wave near a streamer. △ Less

Submitted 26 June, 2021; originally announced June 2021.

Comments: 08 pages, 08 figures, accepted for publication in ApJ

Solar prominence diagnostics from non-LTE modelling of Mgii h&k line profiles

Authors: Aaron W. Peat, Nicolas Labrosse, Brigitte Schmieder, Krzysztof Barczynski

Abstract: Aims: We investigate a new method to for obtaining the plasma parameters of solar prominences observed in the Mgii h&k spectral lines by comparing line profiles from the IRIS satellite to a bank of profiles computed with a one-dimensional non-local thermodynamic equilibrium (non-LTE) radiative transfer code. Methods: Using a grid of 1007 one-dimensional non-LTE radiative transfer models we carry… ▽ More Aims: We investigate a new method to for obtaining the plasma parameters of solar prominences observed in the Mgii h&k spectral lines by comparing line profiles from the IRIS satellite to a bank of profiles computed with a one-dimensional non-local thermodynamic equilibrium (non-LTE) radiative transfer code. Methods: Using a grid of 1007 one-dimensional non-LTE radiative transfer models we carry out this new method to match computed spectra to observed line profiles while accounting for line core shifts not present in the models. The prominence observations were carried out by the IRIS satellite on 19 April 2018. Results: The prominence is very dynamic with many flows. The models are able to recover satisfactory matches in areas of the prominence where single line profiles are observed. We recover: mean temperatures of 6000 to 50,000K; mean pressures of 0.01 to 0.5 dyne cm$^{-2}$; column masses of 3.7$\times10^{-8}$ to 5$\times10^{-4}$ g cm$^{-2}$; a mean electron density of 7.3$\times10^{8}$ to 1.8$\times10^{11}$ cm$^{-3}$; and an ionisation degree ${n_\text{HII}}/{n_\text{HI}}=0.03 - 4500$. The highest values for the ionisation degree are found in areas where the line of sight crosses mostly plasma from the PCTR, correlating with high mean temperatures and correspondingly no H$α$ emission. Conclusions: This new method naturally returns information on how closely the observed and computed profiles match, allowing the user to identify areas where no satisfactory match between models and observations can be obtained. Regions where satisfactory fits were found were more likely to contain a model encompassing a PCTR. The line core shift can also be recovered from this new method, and it shows a good qualitative match with that of the line core shift found by the quantile method. This demonstrates the effectiveness of the approach to line core shifts in the new method. △ Less

Submitted 18 June, 2021; originally announced June 2021.

Comments: 16 pages, 21 figures, 1 table

Journal ref: A&A 653, A5 (2021)

Spectro-imagery of an active tornado-like prominence: formation and evolution

Authors: Krzysztof Barczynski, Brigitte Schmieder, Aaron W. Peat, Nicolas Labrosse, Pierre Mein, Nicole Mein

Abstract: The nature of flows in tornado-prominences is an open issue. While the AIA imager aboard the Solar Dynamics Observatory (SDO) allowed us to follow the global structure of a tornado-like prominence during five hours, the Interface Region Imaging Spectrograph (IRIS), and the Multi subtractive Double pass spectrograph (MSDP) permitted to obtain plasma diagnostics of its fine structures. We aim to add… ▽ More The nature of flows in tornado-prominences is an open issue. While the AIA imager aboard the Solar Dynamics Observatory (SDO) allowed us to follow the global structure of a tornado-like prominence during five hours, the Interface Region Imaging Spectrograph (IRIS), and the Multi subtractive Double pass spectrograph (MSDP) permitted to obtain plasma diagnostics of its fine structures. We aim to address two questions. Is the observed plasma rotation conceptually acceptable in a flux rope magnetic support configuration with dips? How is the plasma density distributed in the tornado-like prominence? We calculated line-of-sight velocities and non-thermal line widths using Gaussian fitting for Mg II lines and bisector method for H-alpha line. We determined the electron density from Mg II line integrated intensities and profile fitting methods using 1D NLTE radiative transfer theory models. The global structure of the prominence observed in H-alpha, and Mg II h and k lines fits with a magnetic field structure configuration with dips. Coherent Dopplershifts in red- and blue-shifted areas observed in both lines were detected along rapidly-changing vertical and horizontal structures. However, the tornado at the top of the prominence consists of multiple-fine threads with opposite flows suggesting counter streaming flows rather than rotation. Surprisingly we found that the electron density at the top of the prominence could be larger (10^11 cm^{-3}) than in the inner part of the prominence. We suggest that the tornado is in a formation state with cooling of hot plasma in a first phase, and following that, a phase of leakage of the formed blobs with large transverse flows of material along long loops extended away of the UV prominence top. The existence of such long magnetic field lines on both sides of the prominence would avoid the tornado-like prominence to really turn around its axis. △ Less

Submitted 8 June, 2021; originally announced June 2021.

Comments: 30 pages, 23 figures, accepted for publication in A&A

Journal ref: A&A 653, A94 (2021)

Observations of a prominence eruption and loop contraction

Authors: Pooja Devi, Pascal Démoulin, Ramesh Chandra, Reetika Joshi, Brigitte Schmieder, Bhuwan Joshi

Abstract: Context. Prominence eruptions provide key observations to understand the launch of coronal mass ejections as their cold plasma traces a part of the unstable magnetic configuration. Aims. We select a well observed case to derive observational constraints for eruption models. Methods. We analyze the prominence eruption and loop expansion and contraction observed on 02 March 2015 associated with… ▽ More Context. Prominence eruptions provide key observations to understand the launch of coronal mass ejections as their cold plasma traces a part of the unstable magnetic configuration. Aims. We select a well observed case to derive observational constraints for eruption models. Methods. We analyze the prominence eruption and loop expansion and contraction observed on 02 March 2015 associated with a GOES M3.7 class flare (SOL2015-03-02T15:27) using the data from Atmospheric Imaging Assembly (AIA) and the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). We study the prominence eruption and the evolution of loops using the time-distance techniques. Results. The source region is a decaying bipolar active region where magnetic flux cancellation is present for several days before the eruption. AIA observations locate the erupting prominence within a flux rope viewed along its local axis direction. We identify and quantify the motion of loops in contraction and expansion located on the side of the erupting flux rope. Finally, RHESSI hard X-ray observations identify the loop top and two foot-point sources. Conclusions. Both AIA and RHESSI observations support the standard model of eruptive flares. The contraction occurs 19 minutes after the start of the prominence eruption indicating that this contraction is not associated with the eruption driver. Rather, this prominence eruption is compatible with an unstable flux rope where the contraction and expansion of the lateral loop is the consequence of a side vortex developing after the flux rope is launched. △ Less

Submitted 19 January, 2021; originally announced January 2021.

Comments: 16 pages, 9 figures, 1 table, and appendix

Multi thermal atmosphere of a mini solar flare during magnetic reconnection observed with IRIS

Authors: Reetika Joshi, Brigitte Schmieder, Akiko Tei, Guillaume Aulanier, Juraj Lörinčík, Ramesh Chandra, Petr Heinzel

Abstract: The Interface Region Imaging Spectrograph(IRIS) with its high spatial and temporal resolution brings exceptional plasma diagnostics of solar chromospheric and coronal activity during magnetic reconnection. The aim of this work is to study the fine structure and dynamics of the plasma at a jet base forming a mini flare between two emerging magnetic fluxes (EMFs) observed with IRIS and the Solar Dyn… ▽ More The Interface Region Imaging Spectrograph(IRIS) with its high spatial and temporal resolution brings exceptional plasma diagnostics of solar chromospheric and coronal activity during magnetic reconnection. The aim of this work is to study the fine structure and dynamics of the plasma at a jet base forming a mini flare between two emerging magnetic fluxes (EMFs) observed with IRIS and the Solar Dynamics Observatory (SDO) instruments. We proceed to a spatio-temporal analysis of IRIS spectra observed in the spectral ranges of Mg II, C II, and Si IV ions. Doppler velocities from Mg II lines are computed by using a cloud model technique. Strong asymmetric Mg II and C II line profiles with extended blue wings observed at the reconnection site (jet base) are interpreted by the presence of two chromospheric temperature clouds, one explosive cloud with blueshifts at 290 km/s and one cloud with smaller Dopplershift (around 36 km/s). Simultaneously at the same location (jet base), strong emission of several transition region lines (e.g. O IV and Si IV), emission of the Mg II triplet lines of the Balmer-continuum and absorption of identified chromospheric lines in Si IV broad profiles have been observed and analysed. Such observations of IRIS line and continuum emissions allow us to propose a stratification model for the white-light mini flare atmosphere with multiple layers of different temperatures along the line of sight, in a reconnection current sheet. It is the first time that we could quantify the fast speed (possibly Alfvénic flows) of cool clouds ejected perpendicularly to the jet direction by using the cloud model technique. We conjecture that the ejected clouds come from plasma which was trapped between the two EMFs before reconnection or be caused by chromospheric-temperature (cool) upflow material like in a surge, during reconnection △ Less

Submitted 29 October, 2020; originally announced October 2020.

Comments: 20 pages, 17 figures, Accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 645, A80 (2021)