CAGIRE: a wide-field NIR imager for the COLIBRI 1.3 meter robotic telescope
Authors:
Alix Nouvel de la Flèche,
Jean-Luc Atteia,
Jérémie Boy,
Alain Klotz,
Arthur Langlois,
Marie Larrieu,
Romain Mathon,
Hervé Valentin,
Philippe Ambert,
Jean-Claude Clemens,
Damien Dornic,
Eric Kajfasz,
Jean Le Graët,
Olivier Llido,
Aurélia Secroun,
Olivier Boulade,
Ayoub Bounab,
Giacomo Badano,
Olivier Gravrand,
Sébastien Aufranc,
Adrien Lamoure,
Lilian Martineau,
Laurent Rubaldo,
Hervé Geoffray,
François Gonzalez
, et al. (10 additional authors not shown)
Abstract:
The use of high energy transients such as Gamma Ray Bursts (GRBs) as probes of the distant universe relies on the close collaboration between space and ground facilities. In this context, the Sino-French mission SVOM has been designed to combine a space and a ground segment and to make the most of their synergy. On the ground, the 1.3 meter robotic telescope COLIBRI, jointly developed by France an…
▽ More
The use of high energy transients such as Gamma Ray Bursts (GRBs) as probes of the distant universe relies on the close collaboration between space and ground facilities. In this context, the Sino-French mission SVOM has been designed to combine a space and a ground segment and to make the most of their synergy. On the ground, the 1.3 meter robotic telescope COLIBRI, jointly developed by France and Mexico, will quickly point the sources detected by the space hard X-ray imager ECLAIRs, in order to detect and localise their visible/NIR counterpart and alert large telescopes in minutes. COLIBRI is equipped with two visible cameras, called DDRAGO-blue and DDRAGO-red, and an infrared camera, called CAGIRE, designed for the study of high redshift GRBs candidates. Being a low-noise NIR camera mounted at the focus of an alt-azimutal robotic telescope imposes specific requirements on CAGIRE. We describe here the main characteristics of the camera: its optical, mechanical and electronics architecture, the ALFA detector, and the operation of the camera on the telescope. The instrument description is completed by three sections presenting the calibration strategy, an image simulator incorporating known detector effects, and the automatic reduction software for the ramps acquired by the detector. This paper aims at providing an overview of the instrument before its installation on the telescope.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
Flux reconstruction for the NIR camera CAGIRE at the focus of the Colibrí telescope
Authors:
Alix Nouvel de la Flèche,
Jean-Luc Atteia,
Hervé Valentin,
Marie Larrieu,
Jérémie Boy,
Olivier Gravrand,
Olivier Boulade,
Jean-Claude Clemens,
Aurélia Secroun,
Eric Kajfasz,
Olivier Llido,
Stéphane Basa,
François Dolon,
Johan Floriot,
Simona Lombardo,
Adrien Lamoure,
Laurent Rubaldo,
Bruno Fieque,
Julien Roumegoux,
Hervé Geoffray,
Alan M. Watson,
William H. Lee,
Nathaniel Butler
Abstract:
CAGIRE is the near infrared camera of the Colibrí robotic telescope, designed for the follow-up of SVOM alerts. It is based on the ALFA 2k x 2k detector, from the LYNRED French Company, operating in "Up the Ramp" mode. An observation consists in a series of short (1-2 minutes) exposures during which the pixels are read out every 1.3 second, while continuously accumulating charges proportionally to…
▽ More
CAGIRE is the near infrared camera of the Colibrí robotic telescope, designed for the follow-up of SVOM alerts. It is based on the ALFA 2k x 2k detector, from the LYNRED French Company, operating in "Up the Ramp" mode. An observation consists in a series of short (1-2 minutes) exposures during which the pixels are read out every 1.3 second, while continuously accumulating charges proportionally to the received flux. We discuss here the preprocessing of CAGIRE data and a method that can be used to recover the flux received by each pixel from the slope of the ramp.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
