-
Properties of magnetic null points associated with X-class flares during solar cycle 24
Authors:
R. L. Edgar,
S. Regnier
Abstract:
Since the launch of the Solar Dynamics Observatory (SDO) in 2010 and throughout the solar cycle 24, the Sun has produced few tens of xclass flares, which are the most energetic solar events. Those flares are produced in regions where the magnetic flux/energy is large and the magnetic configurations are complex. To provide more insights into the flaring process, we investigate the properties of mag…
▽ More
Since the launch of the Solar Dynamics Observatory (SDO) in 2010 and throughout the solar cycle 24, the Sun has produced few tens of xclass flares, which are the most energetic solar events. Those flares are produced in regions where the magnetic flux/energy is large and the magnetic configurations are complex. To provide more insights into the flaring process, we investigate the properties of magnetic null points (MNPs) and their correlation with the energy release sites. During solar cycle 24, we identify 17 xclass flares satisfying selection criteria. From SDO/HMI magnetograms, we perform potential extrapolations around the peak time of the flare to access the 3D coronal magnetic field and thus investigate the existence of coronal MNPs. We then correlate the flaring sites with the existing MNPs using SDO/AIA 171A EUV observations, and deduce their properties (sign, spine, fan). Six active regions out of 10 possess at least one MNP, which is stable and with large magnetic field gradients: this implies that 35% of xclass flares are associated with a MNP; of which 87.5% of MNPs are of positive type. The MNPs associated with the flare sites are predominantly located ata height between 05 and 2 Mm, and with a vertical/radial spine field line. We also find a slight correlation between the MNPs not associated with a flare and negative-type MNPs (55%) within the active region. Regarding the physics of flares, the association between the enhanced intensity at the flaring site and a MNP represents about a third of the possible scenarios for triggering xclass flares.
△ Less
Submitted 22 October, 2024;
originally announced October 2024.
-
Identifying coronal sources of L1 solar wind disturbances using the Fisk heliospheric magnetic field and potential field extrapolations during three solar minima
Authors:
P. J. Steyn,
D. Johnson,
G. J. J. Botha,
S. Régnier
Abstract:
The solar minima between solar cycles 22-23, 23-24 and 24-25 are the best observed minima on record. In situ solar wind and interplanetary magnetic field measurements by the WIND and ACE spacecraft at L1 with one-hour cadence are explored using wavelet analyses for the most quiescent year during each minimum. Times of local peaks in periodicities are identified in the solar wind velocity, magnetic…
▽ More
The solar minima between solar cycles 22-23, 23-24 and 24-25 are the best observed minima on record. In situ solar wind and interplanetary magnetic field measurements by the WIND and ACE spacecraft at L1 with one-hour cadence are explored using wavelet analyses for the most quiescent year during each minimum. Times of local peaks in periodicities are identified in the solar wind velocity, magnetic field components, and proton number densities. The measured radial velocities at these times are used to trace magnetic field lines to the photosphere using two models. The first is the Fisk heliospheric magnetic field that traces field lines from L1 to the photosphere. They connect exclusively to solar poles and in 88% instances to locations of polar coronal holes. The second model uses the Parker spiral to trace from L1 to the solar source surface and potential field extrapolations from the source surface to the photosphere. These field lines terminate at equatorial and mid-latitude coordinates of which some are located close to coronal holes. This study connects for the first time coronal hole signatures in the ecliptic plane at L1 with polar coronal holes using the Fisk field. It shows how sources from both the solar equator and poles influence the solar wind at L1 and how the two models compliment each other to identify these sources.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Oscillatory reconnection as a plasma diagnostic in the solar corona
Authors:
Konstantinos Karampelas,
James A. McLaughlin,
Gert J. J. Botha,
Stéphane Régnier
Abstract:
Oscillatory reconnection is a relaxation process in magnetised plasma, with an inherent periodicity that is exclusively dependent on the properties of the background plasma. This study focuses on the seismological prospects of oscillatory reconnection in the solar corona. We perform three sets of parameter studies (for characteristic coronal values of the background magnetic field, density and tem…
▽ More
Oscillatory reconnection is a relaxation process in magnetised plasma, with an inherent periodicity that is exclusively dependent on the properties of the background plasma. This study focuses on the seismological prospects of oscillatory reconnection in the solar corona. We perform three sets of parameter studies (for characteristic coronal values of the background magnetic field, density and temperature) using the PLUTO code to solve the fully compressive, resistive MHD equations for a 2D magnetic X-point. From each parameter study, we derive the period of the oscillatory reconnection. We find that this period is inversely proportional to the characteristic strength of the background magnetic field and the square root of the initial plasma temperature, while following a square root dependency upon the equilibrium plasma density. These results reveal an inverse proportionality between the magnitude of the Alfvén speed and the period, as well as the background sound speed and the period. Furthermore, we note that the addition of anisotropic thermal conduction only leads to a small increase in the mean value for the period. Finally, we establish an empirical formula that gives the value for the period in relation to the background magnetic field, density and temperature. This gives us a quantified relation for oscillatory reconnection, to be used as a plasma diagnostic in the solar corona, opening up the possibility of using oscillatory reconnection for coronal seismology.
△ Less
Submitted 6 January, 2023;
originally announced January 2023.
-
The independence of oscillatory reconnection periodicity from the initial pulse
Authors:
Konstantinos Karampelas,
James A. McLaughlin,
Gert J. J. Botha,
Stéphane Régnier
Abstract:
Oscillatory reconnection can manifest through the interaction between the ubiquitous MHD waves and omnipresent null points in the solar atmosphere and is characterized by an inherent periodicity. In the current study, we focus on the relationship between the period of oscillatory reconnection and the strength of the wave pulse initially perturbing the null point, in a hot coronal plasma. We use th…
▽ More
Oscillatory reconnection can manifest through the interaction between the ubiquitous MHD waves and omnipresent null points in the solar atmosphere and is characterized by an inherent periodicity. In the current study, we focus on the relationship between the period of oscillatory reconnection and the strength of the wave pulse initially perturbing the null point, in a hot coronal plasma. We use the PLUTO code to solve the fully compressive, resistive MHD equations for a 2D magnetic X-point. Using wave pulses with a wide range of amplitudes, we perform a parameter study to obtain values for the period, considering the presence and absence of anisotropic thermal conduction separately. In both cases, we find that the resulting period is independent of the strength of the initial perturbation. The addition of anisotropic thermal conduction only leads to an increase in the mean value for the period, in agreement with our previous study. We also consider a different type of initial driver and we obtain an oscillation period matching the independent trend previously mentioned. Thus, we report for the first time on the independence between the type and strength of the initializing wave pulse and the resulting period of oscillatory reconnection in a hot coronal plasma. This makes oscillatory reconnection a promising mechanism to be used within the context of coronal seismology.
△ Less
Submitted 5 July, 2022;
originally announced July 2022.
-
Oscillatory Reconnection of a 2D X-point in a hot coronal plasma
Authors:
Konstantinos Karampelas,
James A. McLaughlin,
Gert J. J. Botha,
Stéphane Régnier
Abstract:
Oscillatory reconnection (a relaxation mechanism with periodic changes in connectivity) has been proposed as a potential physical mechanism underpinning several periodic phenomena in the solar atmosphere including, but not limited to, quasi-periodic pulsations (QPPs). Despite its importance, however, the mechanism has never been studied within a hot, coronal plasma. We investigate oscillatory reco…
▽ More
Oscillatory reconnection (a relaxation mechanism with periodic changes in connectivity) has been proposed as a potential physical mechanism underpinning several periodic phenomena in the solar atmosphere including, but not limited to, quasi-periodic pulsations (QPPs). Despite its importance, however, the mechanism has never been studied within a hot, coronal plasma. We investigate oscillatory reconnection in a one million Kelvin plasma by solving the fully-compressive, resistive MHD equations for a 2D magnetic X-point under coronal conditions using the PLUTO code. We report on the resulting oscillatory reconnection including its periodicity and decay rate. We observe a more complicated oscillating profile for the current density compared to that found for a cold plasma, due to mode-conversion at the equipartition layer. We also consider, for the first time, the effect of adding anisotropic thermal conduction to the oscillatory reconnection mechanism, and we find this simplifies the spectrum of the oscillation profile and increases the decay rate. Crucially, the addition of thermal conduction does not prevent the oscillatory reconnection mechanism from manifesting. Finally, we reveal a relationship between the equilibrium magnetic field strength, decay rate, and period of oscillatory reconnection, which opens the tantalising possibility of utilizing oscillatory reconnection as a seismological tool.
△ Less
Submitted 10 December, 2021;
originally announced December 2021.
-
Multi-Stranded Coronal Loops: Quantifying Strand Number and Heating Frequency from Simulated Solar Dynamics Observatory (SDO) Atmospheric Imaging Assembly (AIA) Observations
Authors:
Thomas Williams,
Robert W. Walsh,
Stephane Regnier,
Craig D. Johnston
Abstract:
Coronal loops form the basic building blocks of the magnetically closed solar corona yet much is still to be determined concerning their possible fine-scale structuring and the rate of heat deposition within them. Using an improved multi-stranded loop model to better approximate the numerically challenging transition region, this paper examines synthetic NASA Solar Dynamics Observatory's (SDO) Atm…
▽ More
Coronal loops form the basic building blocks of the magnetically closed solar corona yet much is still to be determined concerning their possible fine-scale structuring and the rate of heat deposition within them. Using an improved multi-stranded loop model to better approximate the numerically challenging transition region, this paper examines synthetic NASA Solar Dynamics Observatory's (SDO) Atmospheric Imaging Assembly (AIA) emission simulated in response to a series of prescribed spatially and temporally random, impulsive and localised heating events across numerous sub-loop elements with a strong weighting towards the base of the structure; the nanoflare heating scenario. The total number of strands and nanoflare repetition times are varied systematically in such a way that the total energy content remains approximately constant across all the cases analysed. Repeated time lag detection during an emission time series provides a good approximation for the nanoflare repetition time for low-frequency heating. Furthermore, using a combination of AIA 171/193 and 193/211 channel ratios in combination with spectroscopic determination of the standard deviation of the loop apex temperature over several hours alongside simulations from the outlined multi-stranded loop model, it is demonstrated that both the imposed heating rate and number of strands can be realised.
△ Less
Submitted 26 May, 2021;
originally announced May 2021.
-
Damping of Propagating Kink Waves in the Solar Corona
Authors:
Ajay K. Tiwari,
Richard J. Morton,
Stephane Régnier,
James A. McLaughlin
Abstract:
Alfvénic waves have gained renewed interest since the existence of ubiquitous propagating kink waves were discovered in the corona. {It has long been suggested that Alfvénic} waves play an important role in coronal heating and the acceleration of the solar wind. To this effect, it is imperative to understand the mechanisms that enable their energy to be transferred to the plasma. Mode conversion v…
▽ More
Alfvénic waves have gained renewed interest since the existence of ubiquitous propagating kink waves were discovered in the corona. {It has long been suggested that Alfvénic} waves play an important role in coronal heating and the acceleration of the solar wind. To this effect, it is imperative to understand the mechanisms that enable their energy to be transferred to the plasma. Mode conversion via resonant absorption is believed to be one of the main mechanisms for kink wave damping, and is considered to play a key role in the process of energy transfer. This study examines the damping of propagating kink waves in quiescent coronal loops using the Coronal Multi-channel Polarimeter (CoMP). A coherence-based method is used to track the Doppler velocity signal of the waves, enabling us to investigate the spatial evolution of velocity perturbations. The power ratio of outward to inward propagating waves is used to estimate the associated damping lengths and quality factors. To enable accurate estimates of these quantities, {we provide the first derivation of a likelihood function suitable for fitting models to the ratio of two power spectra obtained from discrete Fourier transforms. Maximum likelihood estimation is used to fit an exponential damping model to the observed variation in power ratio as a function of frequency.} We confirm earlier indications that propagating kink waves are undergoing frequency dependent damping. Additionally, we find that the rate of damping decreases, or equivalently the damping length increases, for longer coronal loops that reach higher in the corona.
△ Less
Submitted 18 April, 2019;
originally announced April 2019.
-
Analysis of 3D plasma motions in a chromospheric jet formed due to magnetic reconnection
Authors:
J. J. González-Avilés,
F. S. Guzmán,
V. Fedun,
G. Verth,
R. Sharma,
S. Shelyag,
S. Regnier
Abstract:
Within the framework of resistive MHD, implementing the C7 equilibrium atmosphere model and a 3D potential magnetic field realistic configuration, we simulate the formation of a plasm jet with the morphology, upward velocity up to 130 km/s and timescale formation between 60 and 90 s after beginning of simulation, similar to those expected for Type II spicules. Initial results of this simulation we…
▽ More
Within the framework of resistive MHD, implementing the C7 equilibrium atmosphere model and a 3D potential magnetic field realistic configuration, we simulate the formation of a plasm jet with the morphology, upward velocity up to 130 km/s and timescale formation between 60 and 90 s after beginning of simulation, similar to those expected for Type II spicules. Initial results of this simulation were published in Paper (e.g., González-Avilés et al. 2018) and present paper is devoted to the analysis of transverse displacements and rotational type motion of the jet. Our results suggest that 3D magnetic reconnection may be responsible for the formation of the jet in Paper (González-Avilés et al. 2018). In this paper, by calculating times series of the velocity components $v_x$ and $v_y$ in different points near to the jet for various heights we find transverse oscillations in agreement with spicule observations. We also obtain a time-distance plot of the temperature in a cross-cut at the plane $x=$0.1 Mm and find significant transverse displacements of the jet. By analyzing temperature isosurfaces of $10^{4}$ K with the distribution of $v_x$, we find that if the line-of-sight (LOS) is approximately perpendicular to the jet axis then there is both motion towards and away from the observer across the width of the jet. This red-blue shift pattern of the jet is caused by rotational motion, initially clockwise and anti-clockwise afterwards, which could be interpreted as torsional motion. From a nearly vertical perspective of the jet the LOS velocity component shows a central blue-shift region surrounded by red-shifted plasma.
△ Less
Submitted 4 October, 2018; v1 submitted 11 July, 2018;
originally announced July 2018.
-
Statistical Analysis of Solar Events Associated with Storm Sudden Commencements over One Year of Solar Maximum during Cycle 23: Propagation from the Sun to the Earth and Effects
Authors:
K. Bocchialini,
B. Grison,
M. Menvielle,
A. Chambodut,
N. Cornilleau-Wehrlin,
D. Fontaine,
A. Marchaudon,
M. Pick,
F. Pitout,
B. Schmieder,
S. Regnier,
I. Zouganelis
Abstract:
Taking the 32 storm sudden commencements (SSCs) listed by ISGI during 2002 as a starting point, we performed a multi-criterion analysis based on observations (propagation time, velocity comparisons, sense of the magnetic field rotation, radio waves) to associate them with solar sources. We identified their effects in the interplanetary medium, and looked at the response of the terrestrial ionized…
▽ More
Taking the 32 storm sudden commencements (SSCs) listed by ISGI during 2002 as a starting point, we performed a multi-criterion analysis based on observations (propagation time, velocity comparisons, sense of the magnetic field rotation, radio waves) to associate them with solar sources. We identified their effects in the interplanetary medium, and looked at the response of the terrestrial ionized and neutral environment. We find that 28 SSCs can be related to 44 coronal mass ejections (CMEs), 15 with a unique CME and 13 with a series of multiple CMEs, among which 19 involved halo CMEs; 12 of the 19 fastest CMEs with speeds greater than 1000 km/s are halo CMEs. The probability for an SSC to occur is 75% if the CME is a halo CME. The complex interactions between two CMEs and the modification of their trajectories have been examined using joint white-light and multiple-wavelength radio observations. The solar-wind structures at L1 after the shocks leading the 32 SSCs are 12 magnetic clouds (MCs), 6 interplanetary CMEs (ICMEs) without an MC structure, 4 miscellaneous structures, which cannot unambiguously be classified as ICMEs, 5 corotating or stream interaction regions (CIRs/SIRs), and 4 isolated shock events; note than one CIR caused two SSCs. The 11 MCs listed in 3 or more MC catalogs covering the year 2002 are associated with SSCs. For the 3 most intense geomagnetic storms related to MCs, we note 2 sudden increases of the Dst, at the arrival of the sheath and the arrival of the MC itself. The most geoeffective events are MCs, since 92% of them trigger moderate or intense storms, followed by ICMEs (33%). At best, CIRs/SIRs only cause weak storms. We show that these geoeffective events (ICMEs or MCs) trigger or reinforce terrestrial radiowave activity in the magnetosphere, an enhanced convection in the ionosphere, and a stronger response in the thermosphere.
△ Less
Submitted 20 March, 2018;
originally announced March 2018.
-
I. Jet Formation and Evolution due to 3D Magnetic Reconnection
Authors:
J. J. González-Avilés,
F. S. Guzmán,
V. Fedun,
G. Verth,
S. Shelyag,
S. Regnier
Abstract:
Using simulated data-driven three-dimensional resistive MHD simulations of the solar atmosphere, we show that magnetic reconnection can be responsible of the formation of jets with characteristic of Type II spicules. For this, we numerically model the photosphere-corona region using the C7 equilibrium atmosphere model. The initial magnetic configuration is a 3D potential magnetic field, extrapolat…
▽ More
Using simulated data-driven three-dimensional resistive MHD simulations of the solar atmosphere, we show that magnetic reconnection can be responsible of the formation of jets with characteristic of Type II spicules. For this, we numerically model the photosphere-corona region using the C7 equilibrium atmosphere model. The initial magnetic configuration is a 3D potential magnetic field, extrapolated up to the solar corona region from a dynamic realistic simulation of solar photospheric magnetoconvection model which is mimicking quiet-Sun. In this case we consider a uniform and constant value of the magnetic resistivity of $12.56 ~Ω~{\rm m}$. We have found that formation of the jets depends on the Lorentz force, which helps to accelerate the plasma upwards. Analyzing various properties of the jet dynamics, we found that the jet structure shows Doppler shift near to regions with high vorticity. The morphology, upward velocity, covering a range up to 100 $\rm km$ $\rm s^{-1}$, and life-time of the estructure, bigger than 100 ${\rm s}$, are similar to those expected for Type II spicules.
△ Less
Submitted 27 February, 2018; v1 submitted 15 September, 2017;
originally announced September 2017.
-
Observational signatures of a kink-unstable coronal flux rope using Hinode/EIS
Authors:
Ben Snow,
Gert J. J. Botha,
Stephane Regnier,
Richard J. Morton,
Erwin Verwichte,
Peter R Young
Abstract:
The signatures of energy release and energy transport for a kink-unstable coronal flux rope are investigated via forward modelling. Synthetic intensity and Doppler maps are generated from a 3D numerical simulation. The CHIANTI database is used to compute intensities for three Hinode/EIS emission lines that cover the thermal range of the loop. The intensities and Doppler velocities at simulation re…
▽ More
The signatures of energy release and energy transport for a kink-unstable coronal flux rope are investigated via forward modelling. Synthetic intensity and Doppler maps are generated from a 3D numerical simulation. The CHIANTI database is used to compute intensities for three Hinode/EIS emission lines that cover the thermal range of the loop. The intensities and Doppler velocities at simulation resolution are spatially degraded to the Hinode/EIS pixel size (1\arcsec), convolved using a Gaussian point-spread function (3\arcsec), and exposed for a characteristic time of 50 seconds. The synthetic images generated for rasters (moving slit) and sit-and-stare (stationary slit) are analysed to find the signatures of the twisted flux and the associated instability. We find that there are several qualities of a kink-unstable coronal flux rope that can be detected observationally using Hinode/EIS, namely the growth of the loop radius, the increase in intensity towards the radial edge of the loop, and the Doppler velocity following an internal twisted magnetic field line. However, EIS cannot resolve the small, transient features present in the simulation, such as sites of small-scale reconnection (e.g. nanoflares)
△ Less
Submitted 15 May, 2017;
originally announced May 2017.
-
Exploring Coronal Dynamics: A Next Generation Solar Physics Mission white paper
Authors:
R. J. Morton,
E. Scullion,
D. S. Bloomfield,
J. A. McLaughlin,
S. Regnier,
S. W. McIntosh,
S. Tomczyk,
P. Young
Abstract:
Determining the mechanisms responsible for the heating of the coronal plasma and maintaining and accelerating the solar wind are long standing goals in solar physics. There is a clear need to constrain the energy, mass and momentum flux through the solar corona and advance our knowledge of the physical process contributing to these fluxes. Furthermore, the accurate forecasting of Space Weather con…
▽ More
Determining the mechanisms responsible for the heating of the coronal plasma and maintaining and accelerating the solar wind are long standing goals in solar physics. There is a clear need to constrain the energy, mass and momentum flux through the solar corona and advance our knowledge of the physical process contributing to these fluxes. Furthermore, the accurate forecasting of Space Weather conditions at the near-Earth environment and, more generally, the plasma conditions of the solar wind throughout the heliosphere, require detailed knowledge of these fluxes in the near-Sun corona. Here we present a short case for a space-based imaging-spectrometer coronagraph, which will have the ability to provide synoptic information on the coronal environment and provide strict constraints on the mass, energy, and momentum flux through the corona. The instrument would ideally achieve cadences of $\sim10$~s, spatial resolution of 1" and observe the corona out to 2~$R_{\sun}$. Such an instrument will enable significant progress in our understanding of MHD waves throughout complex plasmas, as well as potentially providing routine data products to aid Space Weather forecasting.
△ Less
Submitted 18 November, 2016;
originally announced November 2016.
-
3D WKB solution for fast magnetoacoustic wave behaviour around an X-line
Authors:
J. A. McLaughlin,
G. J. J. Botha,
S. Regnier,
D. L. Spoors
Abstract:
We study the propagation of a fast magnetoacoustic wave in a 3D magnetic field created from two magnetic dipoles. The magnetic topology contains an X-line. We aim to contribute to the overall understanding of MHD wave propagation within inhomogeneous media, specifically around X-lines. We investigate the linearised, 3D MHD equations under the assumptions of ideal and cold plasma. We utilise the WK…
▽ More
We study the propagation of a fast magnetoacoustic wave in a 3D magnetic field created from two magnetic dipoles. The magnetic topology contains an X-line. We aim to contribute to the overall understanding of MHD wave propagation within inhomogeneous media, specifically around X-lines. We investigate the linearised, 3D MHD equations under the assumptions of ideal and cold plasma. We utilise the WKB approximation and Charpit's method during our investigation. It is found that the behaviour of the fast magnetoacoustic wave is entirely dictated by the local, inhomogeneous, equilibrium Alfvén speed profile. All parts of the wave experience refraction during propagation, where the magnitude of the refraction effect depends on the location of an individual wave element within the inhomogeneous magnetic field. The X-line, along which the Alfvén speed is identically zero, acts as a focus for the refraction effect. There are two main types of wave behaviour: part of the wave is either trapped by the X-line or escapes the system, and there exists a critical starting region around the X-line that divides these two types of behaviour. For the set-up investigated, it is found that $15.5\%$ of the fast wave energy is trapped by the X-line. We conclude that linear, $β=0$ fast magnetoacoustic waves can accumulate along X-lines and thus these will be specific locations of fast wave energy deposition and thus preferential heating. The work here highlights the importance of understanding the magnetic topology of a system. We also demonstrate how the 3D WKB technique described in this paper can be applied to other magnetic configurations.
△ Less
Submitted 8 July, 2016;
originally announced July 2016.
-
The Influence of Spatial Resolution on Nonlinear Force-Free Modeling
Authors:
M. L. DeRosa,
M. S. Wheatland,
K. D. Leka,
G. Barnes,
T. Amari,
A. Canou,
S. A. Gilchrist,
J. K. Thalmann,
G. Valori,
T. Wiegelmann,
C. J. Schrijver,
A. Malanushenko,
X. Sun,
S. Régnier
Abstract:
The nonlinear force-free field (NLFFF) model is often used to describe the solar coronal magnetic field, however a series of earlier studies revealed difficulties in the numerical solution of the model in application to photospheric boundary data. We investigate the sensitivity of the modeling to the spatial resolution of the boundary data, by applying multiple codes that numerically solve the NLF…
▽ More
The nonlinear force-free field (NLFFF) model is often used to describe the solar coronal magnetic field, however a series of earlier studies revealed difficulties in the numerical solution of the model in application to photospheric boundary data. We investigate the sensitivity of the modeling to the spatial resolution of the boundary data, by applying multiple codes that numerically solve the NLFFF model to a sequence of vector magnetogram data at different resolutions, prepared from a single Hinode/SOT-SP scan of NOAA Active Region 10978 on 2007 December 13. We analyze the resulting energies and relative magnetic helicities, employ a Helmholtz decomposition to characterize divergence errors, and quantify changes made by the codes to the vector magnetogram boundary data in order to be compatible with the force-free model. This study shows that NLFFF modeling results depend quantitatively on the spatial resolution of the input boundary data, and that using more highly resolved boundary data yields more self-consistent results. The free energies of the resulting solutions generally trend higher with increasing resolution, while relative magnetic helicity values vary significantly between resolutions for all methods. All methods require changing the horizontal components, and for some methods also the vertical components, of the vector magnetogram boundary field in excess of nominal uncertainties in the data. The solutions produced by the various methods are significantly different at each resolution level. We continue to recommend verifying agreement between the modeled field lines and corresponding coronal loop images before any NLFFF model is used in a scientific setting.
△ Less
Submitted 21 August, 2015;
originally announced August 2015.
-
Chromospheric seismology above sunspot umbrae
Authors:
B. Snow,
G. J. J. Botha,
S. Regnier
Abstract:
The acoustic resonator is an important model for explaining the three-minute oscillations in the chromosphere above sunspot umbrae. The steep temperature gradients at the photosphere and transition region provide the cavity for the acoustic resonator, which allows waves to be both partially transmitted and partially reflected. In this paper, a new method of estimating the size and temperature prof…
▽ More
The acoustic resonator is an important model for explaining the three-minute oscillations in the chromosphere above sunspot umbrae. The steep temperature gradients at the photosphere and transition region provide the cavity for the acoustic resonator, which allows waves to be both partially transmitted and partially reflected. In this paper, a new method of estimating the size and temperature profile of the chromospheric cavity above a sunspot umbra is developed. The magnetic field above umbrae is modelled numerically in 1.5D with slow magnetoacoustic wave trains travelling along magnetic fieldlines. Resonances are driven by applying the random noise of three different colours---white, pink and brown---as small velocity perturbations to the upper convection zone. Energy escapes the resonating cavity and generates wave trains moving into the corona. Line of sight (LOS) integration is also performed to determine the observable spectra through SDO/AIA. The numerical results show that the gradient of the coronal spectra is directly correlated with the chromosperic temperature configuration. As the chromospheric cavity size increases, the spectral gradient becomes shallower. When LOS integrations is performed, the resulting spectra demonstrate a broadband of excited frequencies that is correlated with the chromospheric cavity size. The broadband of excited frequencies becomes narrower as the chromospheric cavity size increases. These two results provide a potentially useful diagnostic for the chromospheric temperature profile by considering coronal velocity oscillations.
△ Less
Submitted 27 July, 2015;
originally announced July 2015.
-
A new approach to the maser emission in the solar corona
Authors:
Stephane Regnier
Abstract:
The electron plasma frequency $ω_{pe}$ and electron gyrofrequency $Ω_e$ are two parameters that allow us to describe the properties of a plasma and to constrain the physical phenomena at play, for instance, whether a maser instability develops. In this paper, we aim to show that the maser instability can exist in the solar corona. We perform an in-depth analysis of the $ω_{pe}$/$Ω_e$ ratio for sim…
▽ More
The electron plasma frequency $ω_{pe}$ and electron gyrofrequency $Ω_e$ are two parameters that allow us to describe the properties of a plasma and to constrain the physical phenomena at play, for instance, whether a maser instability develops. In this paper, we aim to show that the maser instability can exist in the solar corona. We perform an in-depth analysis of the $ω_{pe}$/$Ω_e$ ratio for simple theoretical and complex solar magnetic field configurations. Using the combination of force-free models for the magnetic field and hydrostatic models for the plasma properties, we determine the ratio of the plasma frequency to the gyrofrequency for electrons. For the sake of comparison, we compute the ratio for bipolar magnetic fields containing a twisted flux bundle, and for four different observed active regions. We also study how $ω_{pe}$/$Ω_e$ is affected by the potential and non-linear force-free field models. We demonstrate that the ratio of the plasma frequency to the gyrofrequency for electrons can be estimated by this novel method combining magnetic field extrapolation techniques and hydrodynamic models. Even if statistically not significant, values of $ω_{pe}$/$Ω_e$ $\leq$ 1 are present in all examples, and are located in the low corona near to photosphere below one pressure scale-height and/or in the vicinity of twisted flux bundles. The values of $ω_{pe}$/$Ω_e$ are lower for non-linear force-free fields than potential fields, thus increasing the possibility of maser instability in the corona. From this new approach for estimating $ω_{pe}$/$Ω_e$, we conclude that the electron maser instability can exist in the solar corona above active regions. The importance of the maser instability in coronal active regions depends on the complexity and topology of the magnetic field configurations.
△ Less
Submitted 27 July, 2015;
originally announced July 2015.
-
Red and Blueshifts in Multi-stranded Coronal Loops: A New Temperature Diagnostic
Authors:
S. Regnier,
R. W. Walsh
Abstract:
Based on observations from the EUV Imaging Spectrometer (EIS) on board Hinode, the existence of a broad distribution of blue and red Dopplershift in active region loops has been revealed; the distribution of Dopplershifts depends on the peak temperature of formation of the observed spectral lines. To reproduce those observations, we use a nanoflare heating model for multi-stranded coronal loops (S…
▽ More
Based on observations from the EUV Imaging Spectrometer (EIS) on board Hinode, the existence of a broad distribution of blue and red Dopplershift in active region loops has been revealed; the distribution of Dopplershifts depends on the peak temperature of formation of the observed spectral lines. To reproduce those observations, we use a nanoflare heating model for multi-stranded coronal loops (Sarkar and Walsh 2008, 2009) and a set of spectral lines covering a broad range of temperature (from 0.25 MK to 5.6 MK). We first show that red- and blueshifts are ubiquitous in all wavelength ranges; redshifts/downflows dominating cool spectral lines (from O V to Si VII) and blueshifts/upflows dominating the hot lines (from Fe XV to Ca XVII). These Dopplershifts are indicative of plasma condensation and evaporation. By computing the average Dopplershift, we derive a new temperature diagnostic for coronal loops: the temperature at which the average Dopplershift vanishes estimates the mean temperature of the plasma along the coronal loop and at the footpoints. To compare closely with observations, we model dense and sparse Hinode/EIS rasters at the instrument resolution. The temperature diagnostic provides the same temperature estimates as the model whatever the type of raster or the viewing angle. To conclude, we have developed a robust temperature diagnostic to measure the plasma temperature of a coronal loop using a broad range of spectral lines.
△ Less
Submitted 6 June, 2017; v1 submitted 14 May, 2014;
originally announced May 2014.
-
Sparkling EUV bright dots observed with Hi-C
Authors:
S. Regnier,
C. E. Alexander,
R. W. Walsh,
A. R. Winebarger,
J. Cirtain,
L. Golub,
K. E. Korreck,
N. Mitchell,
S. Platt,
M. Weber,
B. De Pontieu,
A. Title,
K. Kobayashi,
S. Kuzin,
C. E. DeForest
Abstract:
Observing the Sun at high time and spatial scales is a step towards understanding the finest and fundamental scales of heating events in the solar corona. The Hi-C instrument has provided the highest spatial and temporal resolution images of the solar corona in the EUV wavelength range to date. Hi-C observed an active region on 11 July 2012, which exhibits several interesting features in the EUV l…
▽ More
Observing the Sun at high time and spatial scales is a step towards understanding the finest and fundamental scales of heating events in the solar corona. The Hi-C instrument has provided the highest spatial and temporal resolution images of the solar corona in the EUV wavelength range to date. Hi-C observed an active region on 11 July 2012, which exhibits several interesting features in the EUV line at 193Å: one of them is the existence of short, small brightenings ``sparkling" at the edge of the active region; we call these EUV Bright Dots (EBDs). Individual EBDs have a characteristic duration of 25s with a characteristic length of 680 km. These brightenings are not fully resolved by the SDO/AIA instrument at the same wavelength, however, they can be identified with respect to the Hi-C location of the EBDs. In addition, EBDs are seen in other chromospheric/coronal channels of SDO/AIA suggesting a temperature between 0.5 and 1.5 MK. Based on their frequency in the Hi-C time series, we define four different categories of EBDs: single peak, double peak, long duration, and bursty EBDs. Based on a potential field extrapolation from an SDO/HMI magnetogram, the EBDs appear at the footpoints of large-scale trans-equatorial coronal loops. The Hi-C observations provide the first evidence of small-scale EUV heating events at the base of these coronal loops, which have a free magnetic energy of the order of 10$^{26}$ erg.
△ Less
Submitted 11 February, 2014;
originally announced February 2014.
-
Magnetic Field Extrapolations in the Corona: Success and Future Improvements
Authors:
S. Regnier
Abstract:
The solar atmosphere being magnetic in nature, the understanding of the structure and evolution of the magnetic field in different regions of the solar atmosphere has been an important task over the past decades. This task has been made complicated by the difficulties to measure the magnetic field in the corona, while it is currently known with a good accuracy in the photosphere and/or chromospher…
▽ More
The solar atmosphere being magnetic in nature, the understanding of the structure and evolution of the magnetic field in different regions of the solar atmosphere has been an important task over the past decades. This task has been made complicated by the difficulties to measure the magnetic field in the corona, while it is currently known with a good accuracy in the photosphere and/or chromosphere. Thus, to determine the coronal magnetic field, a mathematical method has been developed based on the observed magnetic field. This is the so-called magnetic field extrapolation technique. This technique relies on two crucial points: (i) the physical assumption leading to the system of differential equations to be solved, (ii) the choice and quality of the associated boundary conditions. In this review, I summarise the physical assumptions currently in use and the findings at different scales in the solar atmosphere. I concentrate the discussion on the extrapolation techniques applied to solar magnetic data and the comparison with observations in a broad range of wavelengths (from hard X-rays to radio emission).
△ Less
Submitted 16 July, 2013; v1 submitted 15 July, 2013;
originally announced July 2013.
-
Anti-parallel EUV flows observed along active region filament threads with Hi-C
Authors:
Caroline E. Alexander,
Robert W. Walsh,
Stephane Regnier,
Jonathan Cirtain,
Amy R. Winebarger,
Leon Golub,
Ken Kobayashi,
Simon Platt,
Nick Mitchell,
Kelly Korreck,
Bart DePontieu,
Craig DeForest,
Mark Weber,
Alan Title,
Sergey Kuzin
Abstract:
Plasma flows within prominences/filaments have been observed for many years and hold valuable clues concerning the mass and energy balance within these structures. Previous observations of these flows primarily come from H-alpha and cool EUV lines (e.g., 304A) where estimates of the size of the prominence threads has been limited by the resolution of the available instrumentation. Evidence of `cou…
▽ More
Plasma flows within prominences/filaments have been observed for many years and hold valuable clues concerning the mass and energy balance within these structures. Previous observations of these flows primarily come from H-alpha and cool EUV lines (e.g., 304A) where estimates of the size of the prominence threads has been limited by the resolution of the available instrumentation. Evidence of `counter-steaming' flows has previously been inferred from these cool plasma observations but now, for the first time, these flows have been directly imaged along fundamental filament threads within the million degree corona (at 193A). In this work we present observations of an active region filament observed with Hi-C that exhibits anti-parallel flows along adjacent filament threads. Complementary data from SDO/AIA and HMI are presented. The ultra-high spatial and temporal resolution of Hi-C allow the anti-parallel flow velocities to be measured (70-80 km/s) and gives an indication of the resolvable thickness of the individual strands (0.8'' +/- 0.1''). The temperature distribution of the plasma flows was estimated to be log T(K) = 5.45 +/- 0.10 using EM loci analysis. We find that SDO/AIA cannot clearly observe these anti-parallel flows nor measure their velocity or thread width due to its larger pixel size. We suggest that
anti-parallel/counter-streaming flows are likely commonplace within all filaments and are currently not observed in EUV due to current instrument spatial resolution.
△ Less
Submitted 21 June, 2013;
originally announced June 2013.
-
Measuring the Magnetic Field Strength of the Quiet Solar Corona Using "EIT Waves"
Authors:
David M. Long,
David R. Williams,
Stéphane Régnier,
Louise K. Harra
Abstract:
Variations in the propagation of globally-propagating disturbances (commonly called "EIT waves") through the low solar corona offer a unique opportunity to probe the plasma parameters of the solar atmosphere. Here, high-cadence observations of two "EIT wave" events taken using the Atmospheric Imaging Assembly (AIA) instrument onboard the Solar Dynamics Observatory (SDO) are combined with spectrosc…
▽ More
Variations in the propagation of globally-propagating disturbances (commonly called "EIT waves") through the low solar corona offer a unique opportunity to probe the plasma parameters of the solar atmosphere. Here, high-cadence observations of two "EIT wave" events taken using the Atmospheric Imaging Assembly (AIA) instrument onboard the Solar Dynamics Observatory (SDO) are combined with spectroscopic measurements from the Extreme ultraviolet Imaging Spectrometer (EIS) onboard the Hinode spacecraft and used to examine the variability of the quiet coronal magnetic-field strength. The combination of pulse kinematics from SDO/AIA and plasma density from Hinode/EIS is used to show that the magnetic-field strength is in the range ~2-6 G in the quiet corona. The magnetic-field estimates are then used to determine the height of the pulse, allowing a direct comparison with theoretical values obtained from magnetic-field measurements from the Helioseismic and Magnetic Imager (HMI) onboard SDO using PFSS and local-domain extrapolations. While local-scale extrapolations predict heights inconsistent with prior measurements, the agreement between observations and the PFSS model indicates that "EIT waves" are a global phenomenon influenced by global-scale magnetic field.
△ Less
Submitted 22 May, 2013;
originally announced May 2013.
-
Thermal Shielding of an Emerging Active Region
Authors:
S. Regnier
Abstract:
The interaction between emerging active regions and the pre-existing coronal magnetic field is important to understand better the mechanisms of storage and release of magnetic energy from the convection zone to the high corona. We are aiming at describing the first steps of the emergence of an active region within a pre-existing quiet-Sun corona in terms of the thermal and magnetic structure. We u…
▽ More
The interaction between emerging active regions and the pre-existing coronal magnetic field is important to understand better the mechanisms of storage and release of magnetic energy from the convection zone to the high corona. We are aiming at describing the first steps of the emergence of an active region within a pre-existing quiet-Sun corona in terms of the thermal and magnetic structure. We use unprecedented spatial, temporal and spectral coverage from the Atmospheric Imager Assembly (AIA) and from the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO). Starting on 30 May 2010 at 17:00 UT and for 8 hours, we follow the emergence of the active region AR11076 within a quiet-Sun region. Using several SDO/AIA filters covering temperatures from 50000K to 10 MK, we show that the emerging process is characterised by a thermal shield at the interface between the emerging flux and pre-existing quiet-Sun corona. The active region 11076 can be considered as a peculiar example of emerging active region as (i) the polarities emerge in a photospheric quiet-Sun region near a supergranular-like distribution, (ii) the polarities forming the bipolar emerging structure do not rotate with respect to each other indicating a small amount of twist in the emerging flux bundle. There is a thermal shield formed at the interface between the emerging active region and the pre-existing quiet-Sun region. The thermal shielding structure deduced from all SDO/AIA channels exhibits a strong asymmetry between the two polarities of the active region suggesting that the heating mechanism for one polarity is more likely to be magnetic reconnection, whilst it is due to increasing magnetic pressure for the opposite polarity.
△ Less
Submitted 17 July, 2012;
originally announced July 2012.
-
Flows at the Edge of an Active Region: Observation and Interpretation
Authors:
Céline Boutry,
Eric Buchlin,
Jean-Claude Vial,
Stéphane Régnier
Abstract:
Upflows observed at the edges of active regions have been proposed as the source of the slow solar wind. In the particular case of Active Region (AR) 10942, where such an upflow has been already observed, we want to evaluate the part of this upflow that actually remains confined in the magnetic loops that connect AR10942 to AR10943. Both active regions were visible simultaneously on the solar disk…
▽ More
Upflows observed at the edges of active regions have been proposed as the source of the slow solar wind. In the particular case of Active Region (AR) 10942, where such an upflow has been already observed, we want to evaluate the part of this upflow that actually remains confined in the magnetic loops that connect AR10942 to AR10943. Both active regions were visible simultaneously on the solar disk and were observed by STEREO/SECCHI EUVI. Using Hinode/EIS spectra, we determine the Doppler shifts and densities in AR10943 and AR10942, in order to evaluate the mass flows. We also perform magnetic field extrapolations to assess the connectivity between AR10942 and AR10943. AR10943 displays a persistent downflow in Fe XII. Magnetic extrapolations including both ARs show that this downflow can be connected to the upflow in AR10942. We estimate that the mass flow received by AR10943 areas connected to AR10942 represents about 18% of the mass flow from AR10942. We conclude that the upflows observed on the edge of active regions represent either large-scale loops with mass flowing along them (accounting for about one-fifth of the total mass flow in this example) or open magnetic field structures where the slow solar wind originates.
△ Less
Submitted 5 April, 2012;
originally announced April 2012.
-
A new look at a polar crown cavity as observed by SDO/AIA
Authors:
S. Regnier,
R. W. Walsh,
C. E. Alexander
Abstract:
The Solar Dynamics Observatory (SDO) was launched in February 2010 and is now providing an unprecedented view of the solar activity at high spatial resolution and high cadence covering a broad range of temperature layers of the atmosphere. We aim at defining the structure of a polar crown cavity and describing its evolution during the erupting process. We use high cadence time series of SDO/AIA ob…
▽ More
The Solar Dynamics Observatory (SDO) was launched in February 2010 and is now providing an unprecedented view of the solar activity at high spatial resolution and high cadence covering a broad range of temperature layers of the atmosphere. We aim at defining the structure of a polar crown cavity and describing its evolution during the erupting process. We use high cadence time series of SDO/AIA observations at 304Å(50000 K) and 171Å(0.6 MK) to determine the structure of the polar crown cavity and its associated plasma as well as the evolution of the cavity during the different phases of the eruption. We report on the observations recorded on 13 June 2010 located on the North-West limb. We observe coronal plasma shaped by magnetic field lines with a negative curvature (U-shape) sitting at the bottom of a cavity. The cavity is located just above the polar crown filament material. We thus observe the inner part of the cavity above the filament as depicted in the classical three part Coronal Mass Ejection (CME) model composed of a filament, a cavity and a CME front. The filament (in this case a polar crown filament) is part of the cavity and makes a continuous structuring from the filament to the CME front depicted by concentric ellipses (in a 2D cartoon). We propose to define a polar crown cavity as a density depletion sitting above denser polar crown filament plasma drained down the cavity due to gravity. As part of the polar crown filament, plasma at different temperatures (ranging from 50000K to 0.6 MK) is observed at the same location on the cavity dips and sustained by a competition between the gravity and the curvature of magnetic field lines. The eruption of the polar crown cavity as a solid body can be decomposed into two phases: a slow rise at a speed of 0.6 km/s, and an acceleration phase at a mean speed of 25 km/s.
△ Less
Submitted 18 July, 2011;
originally announced July 2011.
-
Magnetic Energy Storage and Current Density Distributions for Different Force-Free Models
Authors:
S. Regnier
Abstract:
[..] The change in the magnetic configuration due to the increase/decrease of electric current for different force-free models (potential, linear and nonlinear force-free fields) has never been studied in detail before. Here we focus especially on the evolution of the free magnetic energy, the location of the excess of energy, and the distribution of electric currents in the corona. For this purpo…
▽ More
[..] The change in the magnetic configuration due to the increase/decrease of electric current for different force-free models (potential, linear and nonlinear force-free fields) has never been studied in detail before. Here we focus especially on the evolution of the free magnetic energy, the location of the excess of energy, and the distribution of electric currents in the corona. For this purpose, we use an idealised active region characterised by four main polarities and a satellite polarity allowing us to specify a complex topology and sheared arcades to the coronal magnetic field but no twisted flux bundles. We investigate the changes in the geometry and connectivity of field lines, the magnetic energy and current density content as well as the evolution of null points. Increasing the photospheric current density in the magnetic configuration does not dramatically change the energy-storage processes within the active region even if the magnetic topology is slightly modified. We conclude that for reasonable values of the photospheric current density (the force-free parameter alpha < 0.25 Mm-1), the magnetic configurations studied do change but not dramatically: i) the original null point stays nearly at the same location, ii) the field-line geometry and connectivity are slightly modified, iii) even if the free magnetic energy is significantly increased, the energy storage happens at the same location. This extensive study of different force-free models for a simple magnetic configuration shows that some topological elements of an observed active region, such as null points, can be reproduced with confidence only by considering the potential-field approximation. This study is a preliminary work aiming at understanding the effects of electric currents generated by characteristic photospheric motions on the structure and evolution of the coronal magnetic field.
△ Less
Submitted 18 July, 2011;
originally announced July 2011.
-
3D structure of the outer atmosphere: combining models and observations
Authors:
Stephane Regnier
Abstract:
In this review, I focus on the structure and evolution of the coronal magnetic fields modelled from observations. The development of instruments measuring the photospheric and chromospheric magnetic fields with a high spatial and time resolutions allows us to improve the modeling of the coronal fields based on extrapolation and evolution techniques. In particular, I detail the advance modelling of…
▽ More
In this review, I focus on the structure and evolution of the coronal magnetic fields modelled from observations. The development of instruments measuring the photospheric and chromospheric magnetic fields with a high spatial and time resolutions allows us to improve the modeling of the coronal fields based on extrapolation and evolution techniques. In particular, I detail the advance modelling of quiet-Sun areas, active regions and full-disc evolution. I discuss the structure of coronal magnetic features such as filaments, sigmoids and coronal loops as well as their time evolution and instability. The complexity of the coronal field and the origin of open flux are also investigated in these different areas. Finally I discuss the future improvements in terms of instruments and models required to understand better the coronal field.
△ Less
Submitted 17 January, 2011;
originally announced January 2011.
-
A self-consistent nonlinear force-free solution for a solar active region magnetic field
Authors:
M. S. Wheatland,
S. Regnier
Abstract:
Nonlinear force-free solutions for the magnetic field in the solar corona constructed using photospheric vector magnetic field boundary data suffer from a basic problem: the observed boundary data are inconsistent with the nonlinear force-free model. Specifically, there are two possible choices of boundary conditions on vertical current provided by the data, and the two choices lead to different…
▽ More
Nonlinear force-free solutions for the magnetic field in the solar corona constructed using photospheric vector magnetic field boundary data suffer from a basic problem: the observed boundary data are inconsistent with the nonlinear force-free model. Specifically, there are two possible choices of boundary conditions on vertical current provided by the data, and the two choices lead to different force-free solutions. A novel solution to this problem is described. Bayesian probability is used to modify the boundary values on current density, using field-line connectivity information from the two force-free solutions and taking into account uncertainties, so that the boundary data are more consistent with the two nonlinear force-free solutions. This procedure may be iterated until a set of self-consistent boundary data (the solutions for the two choices of boundary conditions are the same) is achieved. The approach is demonstrated to work in application to Hinode/SOT observations of NOAA active region 10953.
△ Less
Submitted 24 June, 2009;
originally announced June 2009.
-
Relationship between photospheric currents and coronal magnetic helicity for force-free bipolar fields
Authors:
S. Regnier
Abstract:
The origin and evolution of the magnetic helicity in the solar corona are not well understood. For instance, the magnetic helicity of an active region is often about $10^{42}$ Mx$^2$ ($10^{26}$ Wb$^{2}$), but the observed processes whereby it is thought to be injected into the corona do not yet provide an accurate estimate of the resulting magnetic helicity budget or time evolution. The variatio…
▽ More
The origin and evolution of the magnetic helicity in the solar corona are not well understood. For instance, the magnetic helicity of an active region is often about $10^{42}$ Mx$^2$ ($10^{26}$ Wb$^{2}$), but the observed processes whereby it is thought to be injected into the corona do not yet provide an accurate estimate of the resulting magnetic helicity budget or time evolution. The variation in magnetic helicity is important for understanding the physics of flares, coronal mass ejections, and their associated magnetic clouds. To shed light on this topic, we investigate here the changes in magnetic helicity due to electric currents in the corona for a single twisted flux tube that may model characteristic coronal structures such as active region filaments, sigmoids, or coronal loops. For a bipolar photospheric magnetic field and several distributions of current, we extrapolated the coronal field as a nonlinear force-free field. We then computed the relative magnetic helicity, as well as the self and mutual helicities. Starting from a magnetic configuration with a moderate amount of current, the amount of magnetic helicity can increase by 2 orders of magnitude when the maximum current strength is increased by a factor of 2. The high sensitivity of magnetic helicity to the current density can partially explain discrepancies between measured values on the photosphere, in the corona, and in magnetic clouds. Our conclusion is that the magnetic helicity strongly depends on both the strength of the current density and also on its distribution. Only improved measurements of current density at the photospheric level will advance our knowledge of the magnetic helicity content in the solar atmosphere.
△ Less
Submitted 16 March, 2009;
originally announced March 2009.
-
A Critical Assessment of Nonlinear Force-Free Field Modeling of the Solar Corona for Active Region 10953
Authors:
Marc L. DeRosa,
Carolus J. Schrijver,
Graham Barnes,
K. D. Leka,
Bruce W. Lites,
Markus J. Aschwanden,
Tahar Amari,
Aurelien Canou,
James M. McTiernan,
Stephane Regnier,
Julia K. Thalmann,
Gherardo Valori,
Michael S. Wheatland,
Thomas Wiegelmann,
Mark C. M. Cheung,
Paul A. Conlon,
Marcel Fuhrmann,
Bernd Inhester,
Tilaye Tadesse
Abstract:
Nonlinear force-free field (NLFFF) models are thought to be viable tools for investigating the structure, dynamics and evolution of the coronae of solar active regions. In a series of NLFFF modeling studies, we have found that NLFFF models are successful in application to analytic test cases, and relatively successful when applied to numerically constructed Sun-like test cases, but they are less…
▽ More
Nonlinear force-free field (NLFFF) models are thought to be viable tools for investigating the structure, dynamics and evolution of the coronae of solar active regions. In a series of NLFFF modeling studies, we have found that NLFFF models are successful in application to analytic test cases, and relatively successful when applied to numerically constructed Sun-like test cases, but they are less successful in application to real solar data. Different NLFFF models have been found to have markedly different field line configurations and to provide widely varying estimates of the magnetic free energy in the coronal volume, when applied to solar data. NLFFF models require consistent, force-free vector magnetic boundary data. However, vector magnetogram observations sampling the photosphere, which is dynamic and contains significant Lorentz and buoyancy forces, do not satisfy this requirement, thus creating several major problems for force-free coronal modeling efforts. In this article, we discuss NLFFF modeling of NOAA Active Region 10953 using Hinode/SOT-SP, Hinode/XRT, STEREO/SECCHI-EUVI, and SOHO/MDI observations, and in the process illustrate the three such issues we judge to be critical to the success of NLFFF modeling: (1) vector magnetic field data covering larger areas are needed so that more electric currents associated with the full active regions of interest are measured, (2) the modeling algorithms need a way to accommodate the various uncertainties in the boundary data, and (3) a more realistic physical model is needed to approximate the photosphere-to-corona interface in order to better transform the forced photospheric magnetograms into adequate approximations of nearly force-free fields at the base of the corona. We make recommendations for future modeling efforts to overcome these as yet unsolved problems.
△ Less
Submitted 5 February, 2009;
originally announced February 2009.
-
Coronal Alfven speeds in an isothermal atmosphere I. Global properties
Authors:
S. Regnier,
E. R. Priest,
A. W. Hood
Abstract:
Estimating Alfven speeds is of interest in modelling the solar corona, studying the coronal heating problem and understanding the initiation and propagation of coronal mass ejections (CMEs). We assume here that the corona is in a magnetohydrostatic equilibrium and that, because of the low plasma beta, one may decouple the magnetic forces from pressure and gravity. The magnetic field is then desc…
▽ More
Estimating Alfven speeds is of interest in modelling the solar corona, studying the coronal heating problem and understanding the initiation and propagation of coronal mass ejections (CMEs). We assume here that the corona is in a magnetohydrostatic equilibrium and that, because of the low plasma beta, one may decouple the magnetic forces from pressure and gravity. The magnetic field is then described by a force-free field for which we perform a statistical study of the magnetic field strength with height for four different active regions. The plasma along each field line is assumed to be in a hydrostatic equilibrium. As a first approximation, the coronal plasma is assumed to be isothermal with a constant or varying gravity with height. We study a bipolar magnetic field with a ring distribution of currents, and apply this method to four active regions associated with different eruptive events. By studying the global properties of the magnetic field strength above active regions, we conclude that (i) most of the magnetic flux is localized within 50 Mm of the photosphere, (ii) most of the energy is stored in the corona below 150 Mm, (iii) most of the magnetic field strength decays with height for a nonlinear force-free field slower than for a potential field. The Alfven speed values in an isothermal atmosphere can vary by two orders of magnitude (up to 100000 km/s). The global properties of the Alfven speed are sensitive to the nature of the magnetic configuration. For an active region with highly twisted flux tubes, the Alfven speed is significantly increased at the typical height of the twisted flux bundles; in flaring regions, the average Alfven speeds are above 5000 km/s and depart strongly from potential field values.
△ Less
Submitted 6 September, 2008;
originally announced September 2008.
-
POLAR Investigation of the Sun - POLARIS
Authors:
T. Appourchaux,
P. Liewer,
M. Watt,
D. Alexander,
V. Andretta,
F. Auchere,
P. D'Arrigo,
J. Ayon,
T. Corbard,
S. Fineschi,
W. Finsterle,
L. Floyd,
G. Garbe,
L. Gizon,
D. Hassler,
L. Harra,
A. Kosovichev,
J. Leibacher,
M. Leipold,
N. Murphy,
M. Maksimovic,
V. Martinez-Pillet,
B. S. A. Matthews,
R. Mewaldt,
D. Moses
, et al. (12 additional authors not shown)
Abstract:
The POLAR Investigation of the Sun (POLARIS) mission uses a combination of a gravity assist and solar sail propulsion to place a spacecraft in a 0.48 AU circular orbit around the Sun with an inclination of 75 degrees with respect to solar equator. This challenging orbit is made possible by the challenging development of solar sail propulsion. This first extended view of the high-latitude regions…
▽ More
The POLAR Investigation of the Sun (POLARIS) mission uses a combination of a gravity assist and solar sail propulsion to place a spacecraft in a 0.48 AU circular orbit around the Sun with an inclination of 75 degrees with respect to solar equator. This challenging orbit is made possible by the challenging development of solar sail propulsion. This first extended view of the high-latitude regions of the Sun will enable crucial observations not possible from the ecliptic viewpoint or from Solar Orbiter. While Solar Orbiter would give the first glimpse of the high latitude magnetic field and flows to probe the solar dynamo, it does not have sufficient viewing of the polar regions to achieve POLARIS' primary objective : determining the relation between the magnetism and dynamics of the Sun's polar regions and the solar cycle.
△ Less
Submitted 23 June, 2008; v1 submitted 28 May, 2008;
originally announced May 2008.
-
Free Magnetic Energy in Solar Active Regions above the Minimum-Energy Relaxed State
Authors:
S. Regnier,
E. R. Priest
Abstract:
To understand the physics of solar flares, including the local reorganisation of the magnetic field and the acceleration of energetic particles, we have first to estimate the free magnetic energy available for such phenomena, which can be converted into kinetic and thermal energy. The free magnetic energy is the excess energy of a magnetic configuration compared to the minimum-energy state, whic…
▽ More
To understand the physics of solar flares, including the local reorganisation of the magnetic field and the acceleration of energetic particles, we have first to estimate the free magnetic energy available for such phenomena, which can be converted into kinetic and thermal energy. The free magnetic energy is the excess energy of a magnetic configuration compared to the minimum-energy state, which is a linear force-free field if the magnetic helicity of the configuration is conserved. We investigate the values of the free magnetic energy estimated from either the excess energy in extrapolated fields or the magnetic virial theorem. For four different active regions, we have reconstructed the nonlinear force-free field and the linear force-free field corresponding to the minimum-energy state. The free magnetic energies are then computed. From the energy budget and the observed magnetic activity in the active region, we conclude that the free energy above the minimum-energy state gives a better estimate and more insights into the flare process than the free energy above the potential field state.
△ Less
Submitted 12 May, 2008;
originally announced May 2008.
-
A new view of quiet-Sun topology from Hinode/SOT
Authors:
S. Regnier,
C. E. Parnell,
A. L. Haynes
Abstract:
With the recent launch of the Hinode satellite our view of the nature and evolution of quiet-Sun regions has been improved. In light of the new high resolution observations, we revisit the study of the quiet Sun's topological nature. Topology is a tool to explain the complexity of the magnetic field, the occurrence of reconnection processes, and the heating of the corona. This Letter aims to giv…
▽ More
With the recent launch of the Hinode satellite our view of the nature and evolution of quiet-Sun regions has been improved. In light of the new high resolution observations, we revisit the study of the quiet Sun's topological nature. Topology is a tool to explain the complexity of the magnetic field, the occurrence of reconnection processes, and the heating of the corona. This Letter aims to give new insights to these different topics. Using a high-resolution Hinode/SOT observation of the line-of-sight magnetic field on the photosphere, we calculate the three dimensional magnetic field in the region above assuming a potential field. From the 3D field, we determine the existence of null points in the magnetic configuration. From this model of a continuous field, we find that the distribution of null points with height is significantly different from that reported in previous studies. In particular, the null points are mainly located above the bottom boundary layer in the photosphere (54%) and in the chromosphere (44%) with only a few null points in the corona (2%). The density of null points (expressed as the ratio of the number of null points to the number of photospheric magnetic fragments) in the solar atmosphere is estimated to be between 3% and 8% depending on the method used to identify the number of magnetic fragments in the observed photosphere. This study reveals that the heating of the corona by magnetic reconnection at coronal null points is unlikely. Our findings do not rule out the heating of the corona at other topological features. We also report the topological complexity of the chromosphere as strongly suggested by recent observations from Hinode/SOT.
△ Less
Submitted 12 May, 2008;
originally announced May 2008.
-
Non-linear force-free field modeling of a solar active region around the time of a major flare and coronal mass ejection
Authors:
C. J. Schrijver,
M. L. DeRosa,
T. Metcalf,
G. Barnes,
B. Lites,
T. Tarbell,
J. McTiernan,
G. Valori,
T. Wiegelmann,
M. S. Wheatland,
T. Amari,
G. Aulanier,
P. Demoulin,
M. Fuhrmann,
K. Kusano,
S. Regnier,
J. K. Thalmann
Abstract:
Solar flares and coronal mass ejections are associated with rapid changes in field connectivity and powered by the partial dissipation of electrical currents in the solar atmosphere. A critical unanswered question is whether the currents involved are induced by the motion of pre-existing atmospheric magnetic flux subject to surface plasma flows, or whether these currents are associated with the…
▽ More
Solar flares and coronal mass ejections are associated with rapid changes in field connectivity and powered by the partial dissipation of electrical currents in the solar atmosphere. A critical unanswered question is whether the currents involved are induced by the motion of pre-existing atmospheric magnetic flux subject to surface plasma flows, or whether these currents are associated with the emergence of flux from within the solar convective zone. We address this problem by applying state-of-the-art nonlinear force-free field (NLFFF) modeling to the highest resolution and quality vector-magnetographic data observed by the recently launched Hinode satellite on NOAA Active Region 10930 around the time of a powerful X3.4 flare. We compute 14 NLFFF models with 4 different codes and a variety of boundary conditions. We find that the model fields differ markedly in geometry, energy content, and force-freeness. We discuss the relative merits of these models in a general critique of present abilities to model the coronal magnetic field based on surface vector field measurements. For our application in particular, we find a fair agreement of the best-fit model field with the observed coronal configuration, and argue (1) that strong electrical currents emerge together with magnetic flux preceding the flare, (2) that these currents are carried in an ensemble of thin strands, (3) that the global pattern of these currents and of field lines are compatible with a large-scale twisted flux rope topology, and (4) that the ~10^32 erg change in energy associated with the coronal electrical currents suffices to power the flare and its associated coronal mass ejection.
△ Less
Submitted 30 November, 2007;
originally announced December 2007.
-
Nonlinear force-free models for the solar corona I. Two active regions with very different structure
Authors:
S. Regnier,
E. R. Priest
Abstract:
With the development of new instrumentation providing measurements of solar photospheric vector magnetic fields, we need to develop our understanding of the effects of current density on coronal magnetic field configurations. The object is to understand the diverse and complex nature of coronal magnetic fields in active regions using a nonlinear force-free model. From the observed photospheric m…
▽ More
With the development of new instrumentation providing measurements of solar photospheric vector magnetic fields, we need to develop our understanding of the effects of current density on coronal magnetic field configurations. The object is to understand the diverse and complex nature of coronal magnetic fields in active regions using a nonlinear force-free model. From the observed photospheric magnetic field we derive the photospheric current density for two active regions: one is a decaying active region with strong currents (AR8151), and the other is a newly emerged active region with weak currents (AR8210). We compare the three-dimensional structure of the magnetic fields for both active region when they are assumed to be either potential or nonlinear force-free. The latter is computed using a Grad-Rubin vector-potential-like numerical scheme. A quantitative comparison is performed in terms of the geometry, the connectivity of field lines, the magnetic energy and the magnetic helicity content. For the old decaying active region the connectivity and geometry of the nonlinear force-free model include strong twist and strong shear and are very different from the potential model. The twisted flux bundles store magnetic energy and magnetic helicity high in the corona (about 50 Mm). The newly emerged active region has a complex topology and the departure from a potential field is small, but the excess magnetic energy is stored in the low corona and is enough to trigger powerful flares.
△ Less
Submitted 29 March, 2007;
originally announced March 2007.