-
Solar flares as electron accelerators: toward a resolution of the acceleration efficiency issue
Authors:
Anna Volpara,
Paolo Massa,
Michele Piana,
Anna Maria Massone,
A Gordon Emslie
Abstract:
A major open issue concerning the active Sun is the effectiveness with which magnetic reconnection accelerates electrons in flares. A paper published by {\em{Nature}} in 2022 used microwave observations to conclude that the Sun is an almost ideal accelerator, energizing nearly all electrons within a coronal volume to nonthermal energies. Shortly thereafter, a paper published in {\em{Astrophysical…
▽ More
A major open issue concerning the active Sun is the effectiveness with which magnetic reconnection accelerates electrons in flares. A paper published by {\em{Nature}} in 2022 used microwave observations to conclude that the Sun is an almost ideal accelerator, energizing nearly all electrons within a coronal volume to nonthermal energies. Shortly thereafter, a paper published in {\em{Astrophysical Journal Letters}} used hard X-ray measurements \emph{of the same event} to reach the contradictory conclusion that less than 1\% of the available electrons were accelerated. Here we address this controversy by using spatially resolved observations of hard X-ray emission and a spectral inversion method to determine the evolution of the electron spectrum throughout the flare. So we estimated the density of the medium where electrons accelerate and, from this, the ratio of accelerated to ambient electron densities. Results show that this ratio never exceeds a percent or so in the cases analyzed.
△ Less
Submitted 7 February, 2025;
originally announced February 2025.
-
Artificial Intelligence Could Have Predicted All Space Weather Events Associated with the May 2024 Superstorm
Authors:
Sabrina Guastavino,
Edoardo Legnaro,
Anna Maria Massone,
Michele Piana
Abstract:
Space weather, driven by solar flares and Coronal Mass Ejections (CMEs), poses significant risks to technological systems. Accurately forecasting these events and their impact on Earth's magnetosphere remains a challenge because of the complexity of solar-terrestrial interactions. This study applied artificial intelligence (AI) to predict the chain of events associated with the May $2024$ supersto…
▽ More
Space weather, driven by solar flares and Coronal Mass Ejections (CMEs), poses significant risks to technological systems. Accurately forecasting these events and their impact on Earth's magnetosphere remains a challenge because of the complexity of solar-terrestrial interactions. This study applied artificial intelligence (AI) to predict the chain of events associated with the May $2024$ superstorm, including solar flares from NOAA active region 13644, Earth-directed CMEs, and a violent geomagnetic storm. Using magnetogram cut-outs, a Vision Transformer was able to classify the evolution of the active region morphologies, and a video-based deep learning method predicted the occurrence of solar flares; a physics-driven model improved the precision of CME travel-time prediction using coronal observations and solar wind measurements; and a data-driven method exploited these in situ measurements to sound alerts of the geomagnetic storm unrolled over time. The results showed unprecedented accuracy in predicting CME arrival with uncertainty as small as one minute. Moreover, these AI models outperformed traditional methods in predicting solar flares occurrences, onset, and recovery phases of the geomagnetic storm. These findings highlight the impressive potential of AI for space weather forecasting and as a tool to mitigate the impact of extreme solar events on critical infrastructure.
△ Less
Submitted 24 January, 2025;
originally announced January 2025.
-
Deep Learning for Active Region Classification: A Systematic Study from Convolutional Neural Networks to Vision Transformers
Authors:
Edoardo Legnaro,
Sabrina Guastavino,
Michele Piana,
Anna Maria Massone
Abstract:
A solar active region can significantly disrupt the Sun Earth space environment, often leading to severe space weather events such as solar flares and coronal mass ejections. As a consequence, the automatic classification of active region groups is the crucial starting point for accurately and promptly predicting solar activity. This study presents our results concerned with the application of dee…
▽ More
A solar active region can significantly disrupt the Sun Earth space environment, often leading to severe space weather events such as solar flares and coronal mass ejections. As a consequence, the automatic classification of active region groups is the crucial starting point for accurately and promptly predicting solar activity. This study presents our results concerned with the application of deep learning techniques to the classification of active region cutouts based on the Mount Wilson classification scheme. Specifically, we have explored the latest advancements in image classification architectures, from Convolutional Neural Networks to Vision Transformers, and reported on their performances for the active region classification task, showing that the crucial point for their effectiveness consists in a robust training process based on the latest advances in the field.
△ Less
Submitted 23 October, 2024;
originally announced October 2024.
-
Extended Drag-Based Model for better predicting the evolution of Coronal Mass Ejections
Authors:
Mattia Rossi,
Sabrina Guastavino,
Michele Piana,
Anna Maria Massone
Abstract:
The solar wind drag-based model is a widely used framework for predicting the propagation of Coronal Mass Ejections (CMEs) through interplanetary space. This model primarily considers the aerodynamic drag exerted by the solar wind on CMEs. However, factors like magnetic forces, pressure gradients, and the internal dynamics within CMEs justify the need of introducing an additional small-scale accel…
▽ More
The solar wind drag-based model is a widely used framework for predicting the propagation of Coronal Mass Ejections (CMEs) through interplanetary space. This model primarily considers the aerodynamic drag exerted by the solar wind on CMEs. However, factors like magnetic forces, pressure gradients, and the internal dynamics within CMEs justify the need of introducing an additional small-scale acceleration term in the game. Indeed, by accounting for this extra acceleration, the extended drag-based model is shown to offer improved accuracy in describing the evolution of CMEs through the heliosphere and, in turn, in forecasting CME trajectories and arrival times at Earth. This enhancement is crucial for better predicting Space Weather events and mitigating their potential impacts on space-based and terrestrial technologies.
△ Less
Submitted 5 September, 2024;
originally announced September 2024.
-
RIS: Regularized Imaging Spectroscopy for STIX on-board Solar Orbiter
Authors:
Anna Volpara,
Alessandro Lupoli,
Frank Filbir,
Emma Perracchione,
Anna Maria Massone,
Michele Piana
Abstract:
Imaging spectroscopy, i.e., the generation of spatially resolved count spectra and of cubes of count maps at different energies, is one of the main goals of solar hard X-ray missions based on Fourier imaging. For these telescopes, so far imaging spectroscopy has been realized via the generation of either count maps independently reconstructed at the different energy channels, or electron flux maps…
▽ More
Imaging spectroscopy, i.e., the generation of spatially resolved count spectra and of cubes of count maps at different energies, is one of the main goals of solar hard X-ray missions based on Fourier imaging. For these telescopes, so far imaging spectroscopy has been realized via the generation of either count maps independently reconstructed at the different energy channels, or electron flux maps reconstructed via deconvolution of the bremsstrahlung cross-section. Our aim is to introduce the Regularized Imaging Spectroscopy method (RIS), in which regularization implemented in the count space imposes a smoothing constraint across contiguous energy channels, without the need to deconvolve the bremsstrahlung effect. STIX records imaging data computing visibilities in the spatial frequency domain. Our RIS is a sequential scheme in which part of the information coded in the image reconstructed at a specific energy channel is transferred to the reconstruction process at a contiguous channel via visibility interpolation based on Variably Scaled Kernels. In the case of STIX visibilities recorded during the November 11, 2022 flaring event, we show that RIS is able to generate hard X-ray maps whose morphology smoothly evolves from one energy channel to the contiguous one, and that from these maps it is possible to infer spatially-resolved count spectra characterized by notable numerical stability. We also show that the performances of this approach are robust with respect to both the image reconstruction method and the count energy channel utilized to trigger the sequential process. RIS is appropriate to construct image cubes from STIX visibilities that are characterized by a smooth behavior across count energies, thus allowing the generation of numerically stable (and, thus, physically reliable) local count spectra.
△ Less
Submitted 1 July, 2024;
originally announced July 2024.
-
Forecasting Geoffective Events from Solar Wind Data and Evaluating the Most Predictive Features through Machine Learning Approaches
Authors:
Sabrina Guastavino,
Katsiaryna Bahamazava,
Emma Perracchione,
Fabiana Camattari,
Gianluca Audone,
Daniele Telloni,
Roberto Susino,
Gianalfredo Nicolini,
Silvano Fineschi,
Michele Piana,
Anna Maria Massone
Abstract:
This study addresses the prediction of geomagnetic disturbances by exploiting machine learning techniques. Specifically, the Long-Short Term Memory recurrent neural network, which is particularly suited for application over long time series, is employed in the analysis of in-situ measurements of solar wind plasma and magnetic field acquired over more than one solar cycle, from $2005$ to $2019$, at…
▽ More
This study addresses the prediction of geomagnetic disturbances by exploiting machine learning techniques. Specifically, the Long-Short Term Memory recurrent neural network, which is particularly suited for application over long time series, is employed in the analysis of in-situ measurements of solar wind plasma and magnetic field acquired over more than one solar cycle, from $2005$ to $2019$, at the Lagrangian point L$1$. The problem is approached as a binary classification aiming to predict one hour in advance a decrease in the SYM-H geomagnetic activity index below the threshold of $-50$ nT, which is generally regarded as indicative of magnetospheric perturbations. The strong class imbalance issue is tackled by using an appropriate loss function tailored to optimize appropriate skill scores in the training phase of the neural network. Beside classical skill scores, value-weighted skill scores are then employed to evaluate predictions, suitable in the study of problems, such as the one faced here, characterized by strong temporal variability. For the first time, the content of magnetic helicity and energy carried by solar transients, associated with their detection and likelihood of geo-effectiveness, were considered as input features of the network architecture. Their predictive capabilities are demonstrated through a correlation-driven feature selection method to rank the most relevant characteristics involved in the neural network prediction model. The optimal performance of the adopted neural network in properly forecasting the onset of geomagnetic storms, which is a crucial point for giving real warnings in an operational setting, is finally showed.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
AI-FLARES: Artificial Intelligence for the Analysis of Solar Flares Data
Authors:
Michele Piana,
Federico Benvenuto,
Anna Maria Massone,
Cristina Campi,
Sabrina Guastavino,
Francesco Marchetti,
Paolo Massa,
Emma Perracchione,
Anna Volpara
Abstract:
AI-FLARES (Artificial Intelligence for the Analysis of Solar Flares Data) is a research project funded by the Agenzia Spaziale Italiana and by the Istituto Nazionale di Astrofisica within the framework of the ``Attività di Studio per la Comunità Scientifica Nazionale Sole, Sistema Solare ed Esopianeti'' program. The topic addressed by this project was the development and use of computational metho…
▽ More
AI-FLARES (Artificial Intelligence for the Analysis of Solar Flares Data) is a research project funded by the Agenzia Spaziale Italiana and by the Istituto Nazionale di Astrofisica within the framework of the ``Attività di Studio per la Comunità Scientifica Nazionale Sole, Sistema Solare ed Esopianeti'' program. The topic addressed by this project was the development and use of computational methods for the analysis of remote sensing space data associated to solar flare emission. This paper overviews the main results obtained by the project, with specific focus on solar flare forecasting, reconstruction of morphologies of the flaring sources, and interpretation of acceleration mechanisms triggered by solar flares.
△ Less
Submitted 2 January, 2024;
originally announced January 2024.
-
Variation of the electron flux spectrum along a solar flare loop as inferred from STIX hard X-ray observations
Authors:
Anna Volpara,
Paolo Massa,
Sam Krucker,
A Gordon Emslie,
Michele Piana,
Anna Maria Massone
Abstract:
Regularized imaging spectroscopy was introduced for the construction of electron flux images at different energies from count visibilities recorded by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). In this work we seek to extend this approach to data from the Spectrometer/Telescope for Imaging X-rays (STIX) on-board the Solar Orbiter mission. Our aims are to demonstrate the fea…
▽ More
Regularized imaging spectroscopy was introduced for the construction of electron flux images at different energies from count visibilities recorded by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). In this work we seek to extend this approach to data from the Spectrometer/Telescope for Imaging X-rays (STIX) on-board the Solar Orbiter mission. Our aims are to demonstrate the feasibility of regularized imaging spectroscopy as a method for analysis of STIX data, and also to show how such analysis can lead to insights into the physical processes affecting the nonthermal electrons responsible for the hard X-ray emission observed by STIX. STIX records imaging data in an intrinsically different manner from RHESSI. Rather than sweeping the angular frequency plane in a set of concentric circles (one circle per detector), STIX uses $30$ collimators, each corresponding to a specific angular frequency. In this paper we derive an appropriate modification of the previous computational approach for the analysis of the visibilities observed by STIX. This approach also allows for the observed count data to be placed into non-uniformly-spaced energy bins. We show that the regularized imaging spectroscopy approach is not only feasible for analysis of the visibilities observed by STIX, but also more reliable. Application of the regularized imaging spectroscopy technique to several well-observed flares reveals details of the variation of the electron flux spectrum throughout the flare sources. We conclude that the visibility-based regularized imaging spectroscopy approach is well-suited to analysis of STIX data. We also use STIX electron flux spectral images to track, for the first time, the behavior of the accelerated electrons during their path from the acceleration site in the solar corona toward the chromosphere
△ Less
Submitted 13 November, 2023;
originally announced November 2023.
-
Unbiased CLEAN for STIX in Solar Orbiter
Authors:
Emma Perracchione,
Fabiana Camattari,
Anna Volpara,
Paolo Massa,
Anna Maria Massone,
Michele Piana
Abstract:
Aims: To formulate, implement, and validate a user-independent release of CLEAN for Fourier-based image reconstruction of hard X-rays flaring sources. Methods: CLEAN is an iterative deconvolution method for radio and hard X-ray solar imaging. In a specific step of its pipeline, CLEAN requires the convolution between an idealized version of the instrumental Point Spread Function (PSF), and a map co…
▽ More
Aims: To formulate, implement, and validate a user-independent release of CLEAN for Fourier-based image reconstruction of hard X-rays flaring sources. Methods: CLEAN is an iterative deconvolution method for radio and hard X-ray solar imaging. In a specific step of its pipeline, CLEAN requires the convolution between an idealized version of the instrumental Point Spread Function (PSF), and a map collecting point sources located at positions on the solar disk from where most of the flaring radiation is emitted. This convolution step has highly heuristic motivations and the shape of the idealized PSF, which depends on the user's choice, impacts the shape of the overall reconstruction. Here we propose the use of an interpolation/extrapolation process to avoid this user-dependent step, and to realize a completely unbiased version of CLEAN. Results: Applications to observations recorded by the Spectrometer/Telescope for Imaging X-rays (STIX) on-board Solar Orbiter show that this unbiased release of CLEAN outperforms the standard version of the algorithm in terms of both automation and reconstruction reliability, with reconstructions whose accuracy is in line with the one offered by other imaging methods developed in the STIX framework. Conclusions: This unbiased version of CLEAN proposes a feasible solution to a well-known open issue concerning CLEAN, i.e., its low degree of automation. Further, this study provided the first application of an interpolation/extrapolation approach to image reconstruction from STIX experimental visibilities.
△ Less
Submitted 18 July, 2023;
originally announced July 2023.
-
The Focusing Optics X-ray Solar Imager (FOXSI)
Authors:
Steven Christe,
Meriem Alaoui,
Joel Allred,
Marina Battaglia,
Wayne Baumgartner,
Juan Camilo Buitrago-Casas,
Amir Caspi,
Bin Chen,
Thomas Chen,
Brian Dennis,
James Drake,
Lindsay Glesener,
Iain Hannah,
Laura A. Hayes,
Hugh Hudson,
Andrew Inglis,
Jack Ireland,
James Klimchuk,
Adam Kowalski,
Säm Krucker,
Anna Maria Massone,
Sophie Musset,
Michele Piana,
Daniel Ryan,
Albert Y. Shih
, et al. (4 additional authors not shown)
Abstract:
FOXSI is a direct-imaging, hard X-ray (HXR) telescope optimized for solar flare observations. It detects hot plasma and energetic electrons in and near energy release sites in the solar corona via bremsstrahlung emission, measuring both spatial structure and particle energy distributions. It provides two orders of magnitude faster imaging spectroscopy than previously available, probing physically…
▽ More
FOXSI is a direct-imaging, hard X-ray (HXR) telescope optimized for solar flare observations. It detects hot plasma and energetic electrons in and near energy release sites in the solar corona via bremsstrahlung emission, measuring both spatial structure and particle energy distributions. It provides two orders of magnitude faster imaging spectroscopy than previously available, probing physically relevant timescales (<1s) never before accessible to address fundamental questions of energy release and efficient particle acceleration that have importance far beyond their solar application (e.g., planetary magnetospheres, flaring stars, accretion disks). FOXSI measures not only the bright chromospheric X-ray emission where electrons lose most of their energy, but also simultaneous emission from electrons as they are accelerated in the corona and propagate along magnetic field lines. FOXSI detects emission from high in the tenuous corona, where previous instruments have been blinded by nearby bright features and will fully characterizes the accelerated electrons and hottest plasmas as they evolve in energy, space, and time to solve the mystery of how impulsive energy release leads to solar eruptions, the primary drivers of space weather at Earth, and how those eruptions are energized and evolve.
△ Less
Submitted 26 June, 2023;
originally announced June 2023.
-
Physics-driven machine learning for the prediction of coronal mass ejections' travel times
Authors:
Sabrina Guastavino,
Valentina Candiani,
Alessandro Bemporad,
Francesco Marchetti,
Federico Benvenuto,
Anna Maria Massone,
Roberto Susino,
Daniele Telloni,
Silvano Fineschi,
Michele Piana
Abstract:
Coronal Mass Ejections (CMEs) correspond to dramatic expulsions of plasma and magnetic field from the solar corona into the heliosphere. CMEs are scientifically relevant because they are involved in the physical mechanisms characterizing the active Sun. However, more recently CMEs have attracted attention for their impact on space weather, as they are correlated to geomagnetic storms and may induc…
▽ More
Coronal Mass Ejections (CMEs) correspond to dramatic expulsions of plasma and magnetic field from the solar corona into the heliosphere. CMEs are scientifically relevant because they are involved in the physical mechanisms characterizing the active Sun. However, more recently CMEs have attracted attention for their impact on space weather, as they are correlated to geomagnetic storms and may induce the generation of Solar Energetic Particles streams. In this space weather framework, the present paper introduces a physics-driven artificial intelligence (AI) approach to the prediction of CMEs travel time, in which the deterministic drag-based model is exploited to improve the training phase of a cascade of two neural networks fed with both remote sensing and in-situ data. This study shows that the use of physical information in the AI architecture significantly improves both the accuracy and the robustness of the travel time prediction.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Multi-scale CLEAN in hard X-ray solar imaging
Authors:
Anna Volpara,
Michele Piana,
Anna Maria Massone
Abstract:
Multi-scale deconvolution is an ill-posed inverse problem in imaging, with applications ranging from microscopy, through medical imaging, to astronomical remote sensing. In the case of high-energy space telescopes, multi-scale deconvolution algorithms need to account for the peculiar property of native measurements, which are sparse samples of the Fourier transform of the incoming radiation. The p…
▽ More
Multi-scale deconvolution is an ill-posed inverse problem in imaging, with applications ranging from microscopy, through medical imaging, to astronomical remote sensing. In the case of high-energy space telescopes, multi-scale deconvolution algorithms need to account for the peculiar property of native measurements, which are sparse samples of the Fourier transform of the incoming radiation. The present paper proposes a multi-scale version of CLEAN, which is the most popular iterative deconvolution method in Fourier space imaging. Using synthetic data generated according to a simulated but realistic source configuration, we show that this multi-scale version of CLEAN performs better than the original one in terms of accuracy, photometry, and regularization. Further, the application to a data set measured by the NASA Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) shows the ability of multi-scale CLEAN to reconstruct rather complex topographies, characteristic of a real flaring event.
△ Less
Submitted 28 March, 2023;
originally announced March 2023.
-
STIX imaging I -- Concept
Authors:
Paolo Massa,
Gordon. J. Hurford,
Anna Volpara,
Matej Kuhar,
Andrea Francesco Battaglia,
Hualin Xiao,
Diego Casadei,
Emma Perracchione,
Sara Garbarino,
Sabrina Guastavino,
Hannah Collier,
Ewan C. M. Dickson,
Daniel F. Ryan,
Shane A. Maloney,
Frederic Schuller,
Alexander Warmuth,
Anna Maria Massone,
Federico Benvenuto,
Michele Piana,
Säm Krucker
Abstract:
Aims. To provide a schematic mathematical description of the imaging concept of the Spectrometer/Telescope for Imaging X-rays (STIX) on board Solar Orbiter. The derived model is the fundamental starting point for both the interpretation of STIX data and the description of the data calibration process. Methods. We describe the STIX indirect imaging technique which is based on spatial modulation of…
▽ More
Aims. To provide a schematic mathematical description of the imaging concept of the Spectrometer/Telescope for Imaging X-rays (STIX) on board Solar Orbiter. The derived model is the fundamental starting point for both the interpretation of STIX data and the description of the data calibration process. Methods. We describe the STIX indirect imaging technique which is based on spatial modulation of the X-ray photon flux by means of tungsten grids. We show that each of 30 STIX imaging sub-collimators measures a complex Fourier component of the flaring X-ray source corresponding to a specific angular frequency. We also provide details about the count distribution model, which describes the relationship between the photon flux and the measured pixel counts. Results. We define the image reconstruction problem for STIX from both visibilities and photon counts. We provide an overview of the algorithms implemented for the solution of the imaging problem, and a comparison of the results obtained with these different methods in the case of the SOL2022-03-31T18 flaring event.
△ Less
Submitted 4 March, 2023;
originally announced March 2023.
-
The data center for the Spectrometer and Telescope for Imaging X-rays (STIX) onboard Solar Orbiter
Authors:
Hualin Xiao,
Shane Maloney,
Säm Krucker,
Ewan Dickson,
Paolo Massa,
Erica Lastufka,
Andrea Francesco Battaglia,
Laszlo Etesi,
Nicky Hochmuth,
Frederic Schuller,
Daniel F. Ryan,
Olivier Limousin,
Hannah Collier,
Alexander Warmuth,
Michele Piana
Abstract:
The Spectrometer and Telescope for Imaging X-rays (STIX) on board Solar Orbiter observes solar X-ray emission in the range of 4 – 150 keV and produces spectra and images of solar flares over a wide range of flare magnitudes. During nominal operation, STIX continuously generates data. A constant data flow requires fully automated data-processing pipelines to process and analyze the data, and…
▽ More
The Spectrometer and Telescope for Imaging X-rays (STIX) on board Solar Orbiter observes solar X-ray emission in the range of 4 – 150 keV and produces spectra and images of solar flares over a wide range of flare magnitudes. During nominal operation, STIX continuously generates data. A constant data flow requires fully automated data-processing pipelines to process and analyze the data, and a data platform to manage, visualize, and distribute the data products to the scientific community. The STIX Data Center has been built to fulfill these needs. In this paper, we outline its main components to help the community better understand the tools and data it provides. The STIX Data Center is operated at the University of Applied Sciences and Arts Northwestern Switzerland (FHNW) and consists of automated processing pipelines and a data platform. The pipelines process STIX telemetry data, perform common analysis tasks, and generate data products at different processing levels. They have been designed to operate fully automatically with minimal human intervention. The data platform provides web-based user interfaces and application programmable interfaces for searching and downloading STIX data products. The STIX Data Center has been operating successfully for more than two years. The platform facilitates instrument operations and provides vital support to STIX data users.
△ Less
Submitted 11 April, 2023; v1 submitted 1 February, 2023;
originally announced February 2023.
-
Operational solar flare forecasting via video-based deep learning
Authors:
Sabrina Guastavino,
Francesco Marchetti,
Federico Benvenuto,
Cristina Campi,
Michele Piana
Abstract:
Operational flare forecasting aims at providing predictions that can be used to make decisions, typically at a daily scale, about the space weather impacts of flare occurrence. This study shows that video-based deep learning can be used for operational purposes when the training and validation sets used for the network optimization are generated while accounting for the periodicity of the solar cy…
▽ More
Operational flare forecasting aims at providing predictions that can be used to make decisions, typically at a daily scale, about the space weather impacts of flare occurrence. This study shows that video-based deep learning can be used for operational purposes when the training and validation sets used for the network optimization are generated while accounting for the periodicity of the solar cycle. Specifically, the paper describes an algorithm that can be applied to build up sets of active regions that are balanced according to the flare class rates associated to a specific cycle phase. These sets are used to train and validate a Long-term Recurrent Convolutional Network made of a combination of a convolutional neural network and a Long-Short Memory network. The reliability of this approach is assessed in the case of two prediction windows containing the solar storm of March 2015 and September 2017, respectively.
△ Less
Submitted 12 September, 2022;
originally announced September 2022.
-
Forward-fitting STIX visibilities
Authors:
Anna Volpara,
Paolo Massa,
Emma Perracchione,
Andrea Francesco Battaglia,
Sara Garbarino,
Federico Benvenuto,
Anna Maria Massone,
Sam Krucker,
Michele Piana
Abstract:
Aima. To determine to what extent the problem of forward fitting visibilities measured by the Spectrometer/Telescope Imaging X-rays (STIX) on-board Solar Orbiter is more challenging with respect to the same problem in the case of previous hard X-ray solar imaging missions; to identify an effective optimization scheme for parametric imaging for STIX. Methods. This paper introduces a Particle Swarm…
▽ More
Aima. To determine to what extent the problem of forward fitting visibilities measured by the Spectrometer/Telescope Imaging X-rays (STIX) on-board Solar Orbiter is more challenging with respect to the same problem in the case of previous hard X-ray solar imaging missions; to identify an effective optimization scheme for parametric imaging for STIX. Methods. This paper introduces a Particle Swarm Optimization (PSO) algorithm for forward fitting STIX visibilities and compares its effectiveness with respect to the standard simplex-based optimization algorithm used so far for the analysis of visibilities measured by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). This comparison is made by considering experimental visibilities measured by both RHESSI and STIX, and synthetic visibilities generated by accounting for the STIX signal formation model. Results. We found out that the parametric imaging approach based on PSO is as reliable as the one based on the simplex method in the case of RHESSI visibilities. However, PSO is significantly more robust when applied to STIX simulated and experimental visibilities. Conclusions. Standard deterministic optimization is not effective enough for forward-fitting the few visibilities sampled by STIX in the angular frequency plane. Therefore a more sofisticated optimization scheme must be introduced for parametric imaging in the case of the Solar Orbiter X-ray telescope. The forward-fitting routine based on PSO we introduced in this paper proved to be significantly robust and reliable, and could be considered as an effective candidate tool for parametric imaging in the STIX context.
△ Less
Submitted 29 April, 2022;
originally announced April 2022.
-
First hard X-ray imaging results by Solar Orbiter STIX
Authors:
Paolo Massa,
Andrea F. Battaglia,
Anna Volpara,
Hannah Collier,
Gordon J. Hurford,
Matej Kuhar,
Emma Perracchione,
Sara Garbarino,
Anna Maria Massone,
Federico Benvenuto,
Frederic Schuller,
Alexander Warmuth,
Ewan C. M. Dickson,
Hualin Xiao,
Shane A. Maloney,
Daniel F. Ryan,
Michele Piana,
Säm Krucker
Abstract:
Context. The Spectrometer/Telescope for Imaging X-rays (STIX) is one of 6 remote sensing instruments on-board Solar Orbiter. It provides hard X-ray imaging spectroscopy of solar flares by sampling the Fourier transform of the incoming flux. Aims. To show that the visibility amplitude and phase calibration of 24 out of 30 STIX sub-collimators is well advanced and that a set of imaging methods is ab…
▽ More
Context. The Spectrometer/Telescope for Imaging X-rays (STIX) is one of 6 remote sensing instruments on-board Solar Orbiter. It provides hard X-ray imaging spectroscopy of solar flares by sampling the Fourier transform of the incoming flux. Aims. To show that the visibility amplitude and phase calibration of 24 out of 30 STIX sub-collimators is well advanced and that a set of imaging methods is able to provide the first hard X-ray images of the flaring Sun from Solar Orbiter. Methods. We applied four visibility-based image reconstruction methods and a count-based one to calibrated STIX observations. The resulting reconstructions are compared to those provided by an optimization algorithm used for fitting the amplitudes of STIX visibilities. Results. When applied to six flares with GOES class between C4 and M4 which occurred in May 2021, the five imaging methods produce results morphologically consistent with the ones provided by the Atmospheric Imaging Assembly on-board the Solar Dynamic Observatory (SDO/AIA) in UV wavelengths. The $χ^2$ values and the parameters of the reconstructed sources are comparable between methods, thus confirming their robustness. Conclusions. This paper shows that the current calibration of the main part of STIX sub-collimators has reached a satisfactory level for scientific data exploitation, and that the imaging algorithms already available in the STIX data analysis software provide reliable and robust reconstructions of the morphology of solar flares.
△ Less
Submitted 18 February, 2022;
originally announced February 2022.
-
Implementation paradigm for supervised flare forecasting studies: a deep learning application with video data
Authors:
Sabrina Guastavino,
Francesco Marchetti,
Federico Benvenuto,
Cristina Campi,
Michele Piana
Abstract:
Solar flare forecasting can be realized by means of the analysis of magnetic data through artificial intelligence techniques. The aim is to predict whether a magnetic active region (AR) will originate solar flares above a certain class within a certain amount of time. A crucial issue is concerned with the way the adopted machine learning method is implemented, since forecasting results strongly de…
▽ More
Solar flare forecasting can be realized by means of the analysis of magnetic data through artificial intelligence techniques. The aim is to predict whether a magnetic active region (AR) will originate solar flares above a certain class within a certain amount of time. A crucial issue is concerned with the way the adopted machine learning method is implemented, since forecasting results strongly depend on the criterion with which training, validation, and test sets are populated. In this paper we propose a general paradigm to generate these sets in such a way that they are independent from each other and internally well-balanced in terms of AR flaring effectiveness. This set generation process provides a ground for comparison for the performance assessment of machine learning algorithms. Finally, we use this implementation paradigm in the case of a deep neural network, which takes as input videos of magnetograms recorded by the Helioseismic and Magnetic Imager on-board the Solar Dynamics Observatory (SDO/HMI). To our knowledge, this is the first time that the solar flare forecasting problem is addressed by means of a deep neural network for video classification, which does not require any a priori extraction of features from the HMI magnetograms.
△ Less
Submitted 24 October, 2021;
originally announced October 2021.
-
Imaging from STIX visibility amplitudes
Authors:
Paolo Massa,
Emma Perracchione,
Sara Garbarino,
Andrea F Battaglia,
Federico Benvenuto,
Michele Piana,
Gordon Hurford,
Sam Krucker
Abstract:
Aims: To provide the first demonstration of STIX Fourier-transform X-ray imaging using semi-calibrated (amplitude-only) visibility data acquired during the Solar Orbiter's cruise phase. Methods: We use a parametric imaging approach by which STIX visibility amplitudes are fitted by means of two non-linear optimization methods: a fast meta-heuristic technique inspired by social behavior, and a Bayes…
▽ More
Aims: To provide the first demonstration of STIX Fourier-transform X-ray imaging using semi-calibrated (amplitude-only) visibility data acquired during the Solar Orbiter's cruise phase. Methods: We use a parametric imaging approach by which STIX visibility amplitudes are fitted by means of two non-linear optimization methods: a fast meta-heuristic technique inspired by social behavior, and a Bayesian Monte Carlo sampling method, which, although slower, provides better quantification of uncertainties. Results: When applied to a set of solar flare visibility amplitudes recorded by STIX on November 18, 2020 the two parametric methods provide very coherent results. The analysis also demonstrates the ability of STIX to reconstruct high time resolution information and, from a spectral viewpoint, shows the reliability of a double-source scenario consistent with a thermal versus nonthermal interpretation. Conclusions: In this preliminary analysis of STIX imaging based only on visibility amplitudes, we formulate the imaging problem as a non-linear parametric issue we addressed by means of two high-performance optimization techniques that both showed the ability to sample the parametric space in an effective fashion, thus avoiding local minima.
△ Less
Submitted 10 August, 2021;
originally announced August 2021.
-
STIX X-ray microflare observations during the Solar Orbiter commissioning phase
Authors:
Andrea Francesco Battaglia,
Jonas Saqri,
Paolo Massa,
Emma Perracchione,
Ewan C. M. Dickson,
Hualin Xiao,
Astrid M. Veronig,
Alexander Warmuth,
Marina Battaglia,
Gordon J. Hurford,
Aline Meuris,
Olivier Limousin,
László Etesi,
Shane A. Maloney,
Richard A. Schwartz,
Matej Kuhar,
Frederic Schuller,
Valliappan Senthamizh Pavai,
Sophie Musset,
Daniel F. Ryan,
Lucia Kleint,
Michele Piana,
Anna Maria Massone,
Federico Benvenuto,
Janusz Sylwester
, et al. (12 additional authors not shown)
Abstract:
The Spectrometer/Telescope for Imaging X-rays (STIX) is the HXR instrument onboard Solar Orbiter designed to observe solar flares over a broad range of flare sizes, between 4-150 keV. We report the first STIX observations of microflares recorded during the instrument commissioning phase in order to investigate the STIX performance at its detection limit. This first result paper focuses on the temp…
▽ More
The Spectrometer/Telescope for Imaging X-rays (STIX) is the HXR instrument onboard Solar Orbiter designed to observe solar flares over a broad range of flare sizes, between 4-150 keV. We report the first STIX observations of microflares recorded during the instrument commissioning phase in order to investigate the STIX performance at its detection limit. This first result paper focuses on the temporal and spectral evolution of STIX microflares occuring in the AR12765 in June 2020, and compares the STIX measurements with GOES/XRS, SDO/AIA, and Hinode/XRT. For the observed microflares of the GOES A and B class, the STIX peak time at lowest energies is located in the impulsive phase of the flares, well before the GOES peak time. Such a behavior can either be explained by the higher sensitivity of STIX to higher temperatures compared to GOES, or due to the existence of a nonthermal component reaching down to low energies. The interpretation is inconclusive due to limited counting statistics for all but the largest flare in our sample. For this largest flare, the low-energy peak time is clearly due to thermal emission, and the nonthermal component seen at higher energies occurs even earlier. This suggests that the classic thermal explanation might also be favored for the majority of the smaller flares. In combination with EUV and SXR observations, STIX corroborates earlier findings that an isothermal assumption is of limited validity. Future diagnostic efforts should focus on multi-wavelength studies to derive differential emission measure distributions over a wide range of temperatures to accurately describe the energetics of solar flares. Commissioning observations confirm that STIX is working as designed. As a rule of thumb, STIX detects flares as small as the GOES A class. For flares above the GOES B class, detailed spectral and imaging analyses can be performed.
△ Less
Submitted 8 July, 2021; v1 submitted 18 June, 2021;
originally announced June 2021.
-
The Flare Likelihood and Region Eruption Forecasting (FLARECAST) Project: Flare forecasting in the big data & machine learning era
Authors:
M. K. Georgoulis,
D. S. Bloomfield,
M. Piana,
A. M. Massone,
M. Soldati,
P. T. Gallagher,
E. Pariat,
N. Vilmer,
E. Buchlin,
F. Baudin,
A. Csillaghy,
H. Sathiapal,
D. R. Jackson,
P. Alingery,
F. Benvenuto,
C. Campi,
K. Florios,
C. Gontikakis,
C. Guennou,
J. A. Guerra,
I. Kontogiannis,
V. Latorre,
S. A. Murray,
S. -H. Park,
S. von Stachelski
, et al. (3 additional authors not shown)
Abstract:
The EU funded the FLARECAST project, that ran from Jan 2015 until Feb 2018. FLARECAST had a R2O focus, and introduced several innovations into the discipline of solar flare forecasting. FLARECAST innovations were: first, the treatment of hundreds of physical properties viewed as promising flare predictors on equal footing, extending multiple previous works; second, the use of fourteen (14) differe…
▽ More
The EU funded the FLARECAST project, that ran from Jan 2015 until Feb 2018. FLARECAST had a R2O focus, and introduced several innovations into the discipline of solar flare forecasting. FLARECAST innovations were: first, the treatment of hundreds of physical properties viewed as promising flare predictors on equal footing, extending multiple previous works; second, the use of fourteen (14) different ML techniques, also on equal footing, to optimize the immense Big Data parameter space created by these many predictors; third, the establishment of a robust, three-pronged communication effort oriented toward policy makers, space-weather stakeholders and the wider public. FLARECAST pledged to make all its data, codes and infrastructure openly available worldwide. The combined use of 170+ properties (a total of 209 predictors are now available) in multiple ML algorithms, some of which were designed exclusively for the project, gave rise to changing sets of best-performing predictors for the forecasting of different flaring levels. At the same time, FLARECAST reaffirmed the importance of rigorous training and testing practices to avoid overly optimistic pre-operational prediction performance. In addition, the project has (a) tested new and revisited physically intuitive flare predictors and (b) provided meaningful clues toward the transition from flares to eruptive flares, namely, events associated with coronal mass ejections (CMEs). These leads, along with the FLARECAST data, algorithms and infrastructure, could help facilitate integrated space-weather forecasting efforts that take steps to avoid effort duplication. In spite of being one of the most intensive and systematic flare forecasting efforts to-date, FLARECAST has not managed to convincingly lift the barrier of stochasticity in solar flare occurrence and forecasting: solar flare prediction thus remains inherently probabilistic.
△ Less
Submitted 12 May, 2021;
originally announced May 2021.
-
Flare Forecasting Algorithms Based on High-Gradient Polarity Inversion Lines in Active Regions
Authors:
Domenico Cicogna,
Francesco Berrilli,
Daniele Calchetti,
Dario Del Moro,
Luca Giovannelli,
Federico Benvenuto,
Cristina Campi,
Sabrina Guastavino,
Michele Piana
Abstract:
Solar flares emanate from solar active regions hosting complex and strong bipolar magnetic fluxes. Estimating the probability of an active region to flare and defining reliable precursors of intense flares is an extremely challenging task in the space weather field. In this work, we focus on two metrics as flare precursors, the unsigned flux R, tested on MDI/SOHO data and one of the most used para…
▽ More
Solar flares emanate from solar active regions hosting complex and strong bipolar magnetic fluxes. Estimating the probability of an active region to flare and defining reliable precursors of intense flares is an extremely challenging task in the space weather field. In this work, we focus on two metrics as flare precursors, the unsigned flux R, tested on MDI/SOHO data and one of the most used parameters for flare forecasting applications, and a novel topological parameter D representing the complexity of a solar active region. More in detail, we propose an algorithm for the computation of the R value which exploits the higher spatial resolution of HMI maps. This algorithm leads to a differently computed R value, whose functionality is tested on a set of cycle 24th solar flares. Furthermore, we introduce a topological parameter based on the automatic recognition of magnetic polarity-inversion lines in identified active regions, and able to evaluate its magnetic topological complexity. We use both a heuristic approach and a supervised machine learning method to validate the effectiveness of these two descriptors to predict the occurrence of X- or M- class flares in a given solar active region during the following 24 hours period. Our feature ranking analysis shows that both parameters play a significant role in prediction performances. Moreover, the analysis demonstrates that the new topological parameter D is the only one, among 173 overall predictors, which is always present for all test subsets and is systematically ranked within the top-ten positions in all tests concerning the computation of the weighs with which each predictor impacts the flare forecasting.
△ Less
Submitted 3 May, 2021;
originally announced May 2021.
-
Feature augmentation for the inversion of the Fourier transform with limited data
Authors:
Emma Perracchione,
Anna Maria Massone,
Michele Piana
Abstract:
We investigate an interpolation/extrapolation method that, given scattered observations of the Fourier transform, approximates its inverse. The interpolation algorithm takes advantage of modelling the available data via a shape-driven interpolation based on Variably Scaled Kernels (VSKs), whose implementation is here tailored for inverse problems. The so-constructed interpolants are used as inputs…
▽ More
We investigate an interpolation/extrapolation method that, given scattered observations of the Fourier transform, approximates its inverse. The interpolation algorithm takes advantage of modelling the available data via a shape-driven interpolation based on Variably Scaled Kernels (VSKs), whose implementation is here tailored for inverse problems. The so-constructed interpolants are used as inputs for a standard iterative inversion scheme. After providing theoretical results concerning the spectrum of the VSK collocation matrix, we test the method on astrophysical imaging benchmarks.
△ Less
Submitted 7 February, 2021;
originally announced February 2021.
-
Visibility Interpolation in Solar Hard X-ray Imaging: Application to RHESSI and STIX
Authors:
Emma Perracchione,
Paolo Massa,
Anna Maria Massone,
Michele Piana
Abstract:
Space telescopes for solar hard X-ray imaging provide observations made of sampled Fourier components of the incoming photon flux. The aim of this study is to design an image reconstruction method relying on enhanced visibility interpolation in the Fourier domain. % methods heading (mandatory) The interpolation-based method is applied on synthetic visibilities generated by means of the simulation…
▽ More
Space telescopes for solar hard X-ray imaging provide observations made of sampled Fourier components of the incoming photon flux. The aim of this study is to design an image reconstruction method relying on enhanced visibility interpolation in the Fourier domain. % methods heading (mandatory) The interpolation-based method is applied on synthetic visibilities generated by means of the simulation software implemented within the framework of the Spectrometer/Telescope for Imaging X-rays (STIX) mission on board Solar Orbiter. An application to experimental visibilities observed by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) is also considered. In order to interpolate these visibility data we have utilized an approach based on Variably Scaled Kernels (VSKs), which are able to realize feature augmentation by exploiting prior information on the flaring source and which are used here, for the first time, for image reconstruction purposes.} % results heading (mandatory) When compared to an interpolation-based reconstruction algorithm previously introduced for RHESSI, VSKs offer significantly better performances, particularly in the case of STIX imaging, which is characterized by a notably sparse sampling of the Fourier domain. In the case of RHESSI data, this novel approach is particularly reliable when either the flaring sources are characterized by narrow, ribbon-like shapes or high-resolution detectors are utilized for observations. % conclusions heading (optional), leave it empty if necessary The use of VSKs for interpolating hard X-ray visibilities allows a notable image reconstruction accuracy when the information on the flaring source is encoded by a small set of scattered Fourier data and when the visibility surface is affected by significant oscillations in the frequency domain.
△ Less
Submitted 27 December, 2020;
originally announced December 2020.
-
Machine learning as a flaring storm warning machine: Was a warning machine for the September 2017 solar flaring storm possible?
Authors:
Federico Benvenuto,
Cristina Campi,
Anna Maria Massone,
Michele Piana
Abstract:
Machine learning is nowadays the methodology of choice for flare forecasting and supervised techniques, in both their traditional and deep versions, are becoming the most frequently used ones for prediction in this area of space weather. Yet, machine learning has not been able so far to realize an operating warning system for flaring storms and the scientific literature of the last decade suggests…
▽ More
Machine learning is nowadays the methodology of choice for flare forecasting and supervised techniques, in both their traditional and deep versions, are becoming the most frequently used ones for prediction in this area of space weather. Yet, machine learning has not been able so far to realize an operating warning system for flaring storms and the scientific literature of the last decade suggests that its performances in the prediction of intense solar flares are not optimal.
The main difficulties related to forecasting solar flaring storms are probably two. First, most methods are conceived to provide probabilistic predictions and not to send binary yes/no indications on the consecutive occurrence of flares along an extended time range. Second, flaring storms are typically characterized by the explosion of high energy events, which are seldom recorded in the databases of space missions; as a consequence, supervised methods are trained on very imbalanced historical sets, which makes them particularly ineffective for the forecasting of intense flares.
Yet, in this study we show that supervised machine learning could be utilized in a way to send timely warnings about the most violent and most unexpected flaring event of the last decade, and even to predict with some accuracy the energy budget daily released by magnetic reconnection during the whole time course of the storm. Further, we show that the combination of sparsity-enhancing machine learning and feature ranking could allow the identification of the prominent role that energy played as an Active Region property in the forecasting process.
△ Less
Submitted 5 July, 2020;
originally announced July 2020.
-
MEM_GE: a new maximum entropy method for image reconstruction from solar X-ray visibilities
Authors:
Paolo Massa,
Richard Schwartz,
A Kim Tolbert,
Anna Maria Massone,
Brian R Dennis,
Michele Piana,
Federico Benvenuto
Abstract:
Maximum Entropy is an image reconstruction method conceived to image a sparsely occupied field of view and therefore particularly appropriate to achieve super-resolution effects. Although widely used in image deconvolution, this method has been formulated in radio astronomy for the analysis of observations in the spatial frequency domain, and an Interactive Data Language (IDL) code has been implem…
▽ More
Maximum Entropy is an image reconstruction method conceived to image a sparsely occupied field of view and therefore particularly appropriate to achieve super-resolution effects. Although widely used in image deconvolution, this method has been formulated in radio astronomy for the analysis of observations in the spatial frequency domain, and an Interactive Data Language (IDL) code has been implemented for image reconstruction from solar X-ray Fourier data. However, this code relies on a non-convex formulation of the constrained optimization problem addressed by the Maximum Entropy approach and this sometimes results in unreliable reconstructions characterized by unphysical shrinking effects.
This paper introduces a new approach to Maximum Entropy based on the constrained minimization of a convex functional. In the case of observations recorded by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI), the resulting code provides the same super-resolution effects of the previous algorithm, while working properly also when that code produces unphysical reconstructions. Results are also provided of testing the algorithm with synthetic data simulating observations of the Spectrometer/Telescope for Imaging X-rays (STIX) in Solar Orbiter. The new code is available in the {\em{HESSI}} folder of the Solar SoftWare (SSW)tree.
△ Less
Submitted 18 February, 2020;
originally announced February 2020.
-
Feature ranking of active region source properties in solar flare forecasting and the uncompromised stochasticity of flare occurrence
Authors:
Cristina Campi,
Federico Benvenuto,
Anna Maria Massone,
D Shaun Bloomfield,
Manolis K Georgoulis,
Michele Piana
Abstract:
Solar flares originate from magnetically active regions but not all solar active regions give rise to a flare. Therefore, the challenge of solar flare prediction benefits by an intelligent computational analysis of physics-based properties extracted from active region observables, most commonly line-of-sight or vector magnetograms of the active-region photosphere. For the purpose of flare forecast…
▽ More
Solar flares originate from magnetically active regions but not all solar active regions give rise to a flare. Therefore, the challenge of solar flare prediction benefits by an intelligent computational analysis of physics-based properties extracted from active region observables, most commonly line-of-sight or vector magnetograms of the active-region photosphere. For the purpose of flare forecasting, this study utilizes an unprecedented 171 flare-predictive active region properties, mainly inferred by the Helioseismic and Magnetic Imager onboard the Solar Dynamics Observatory (SDO/HMI) in the course of the European Union Horizon 2020 FLARECAST project. Using two different supervised machine learning methods that allow feature ranking as a function of predictive capability, we show that: i) an objective training and testing process is paramount for the performance of every supervised machine learning method; ii) most properties include overlapping information and are therefore highly redundant for flare prediction; iii) solar flare prediction is still - and will likely remain - a predominantly probabilistic challenge.
△ Less
Submitted 19 August, 2019; v1 submitted 28 June, 2019;
originally announced June 2019.
-
Desaturating EUV observations of solar flaring storms
Authors:
Sabrina Guastavino,
Michele Piana,
Anna Maria Massone,
Richard Schwartz,
Federico Benvenuto
Abstract:
Image saturation has been an issue for several instruments in solar astronomy, mainly at EUV wavelengths. However, with the launch of the Atmospheric Imaging Assembly (AIA) as part of the payload of the Solar Dynamic Observatory (SDO) image saturation has become a big data issue, involving around 10^$ frames of the impressive dataset this beautiful telescope has been providing every year since Feb…
▽ More
Image saturation has been an issue for several instruments in solar astronomy, mainly at EUV wavelengths. However, with the launch of the Atmospheric Imaging Assembly (AIA) as part of the payload of the Solar Dynamic Observatory (SDO) image saturation has become a big data issue, involving around 10^$ frames of the impressive dataset this beautiful telescope has been providing every year since February 2010. This paper introduces a novel desaturation method, which is able to recover the signal in the saturated region of any AIA image by exploiting no other information but the one contained in the image itself. This peculiar methodological property, jointly with the unprecedented statistical reliability of the desaturated images, could make this algorithm the perfect tool for the realization of a reconstruction pipeline for AIA data, able to work properly even in the case of long-lasting, very energetic flaring events.
△ Less
Submitted 8 April, 2019;
originally announced April 2019.
-
A count-based imaging model for the Spectrometer/Telescope for Imaging X-rays (STIX) in Solar Orbiter
Authors:
Paolo Massa,
Michele Piana,
Anna Maria Massone,
Federico Benvenuto
Abstract:
The Spectrometer/Telescope for Imaging X-rays (STIX) will look at solar flares across the hard X-ray window provided by the Solar Orbiter cluster. Similarly to the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI), STIX is a visibility-based imaging instrument, which will ask for Fourier-based image reconstruction methods. However, in this paper we show that, as for RHESSI, also for ST…
▽ More
The Spectrometer/Telescope for Imaging X-rays (STIX) will look at solar flares across the hard X-ray window provided by the Solar Orbiter cluster. Similarly to the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI), STIX is a visibility-based imaging instrument, which will ask for Fourier-based image reconstruction methods. However, in this paper we show that, as for RHESSI, also for STIX count-based imaging is possible. Specifically, here we introduce and illustrate a mathematical model that mimics the STIX data formation process as a projection from the incoming photon flux into a vector made of 120 count components. Then we test the reliability of Expectation Maximization for image reconstruction in the case of several simulated configurations typical of flare morphology.
△ Less
Submitted 20 February, 2019;
originally announced February 2019.
-
Compressed sensing and Sequential Monte Carlo for solar hard X-ray imaging
Authors:
Anna Maria Massone,
Federica Sciacchitano,
Michele Piana,
Alberto Sorrentino
Abstract:
We describe two inversion methods for the reconstruction of hard X-ray solar images. The methods are tested against experimental visibilities recorded by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) and synthetic visibilities based on the design of the Spectrometer/Telescope for Imaging X-rays (STIX).
We describe two inversion methods for the reconstruction of hard X-ray solar images. The methods are tested against experimental visibilities recorded by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) and synthetic visibilities based on the design of the Spectrometer/Telescope for Imaging X-rays (STIX).
△ Less
Submitted 20 December, 2018;
originally announced December 2018.
-
Flare forecasting and feature ranking using SDO/HMI data
Authors:
Michele Piana,
Cristina Campi,
Federico Benvenuto,
Sabrina Guastavano,
Anna Maria Massone
Abstract:
We describe here the application of a machine learning method for flare forecasting using vectors of properties extracted from images provided by the Helioseismic and Magnetic Imager in the Solar Dynamics Observatory (SDO/HMI). We also discuss how the method can be used to quantitatively assess the impact of such properties on the prediction process.
We describe here the application of a machine learning method for flare forecasting using vectors of properties extracted from images provided by the Helioseismic and Magnetic Imager in the Solar Dynamics Observatory (SDO/HMI). We also discuss how the method can be used to quantitatively assess the impact of such properties on the prediction process.
△ Less
Submitted 18 December, 2018;
originally announced December 2018.
-
Coronal hard X-ray sources revisited
Authors:
Brian R. Dennis,
Miguel A. Duval-Poo,
Michele Piana,
Andrew R. Inglis,
A. Gordon Emslie,
Jingnan Guo,
Yan Xu
Abstract:
This paper reports on the re-analysis of solar flares in which the hard X-rays (HXRs) come predominantly from the corona rather than from the more usual chromospheric footpoints. All of the 26 previously analyzed event time intervals, over 13 flares, are re-examined for consistency with a flare model in which electrons are accelerated near the top of a magnetic loop that has a sufficiently high de…
▽ More
This paper reports on the re-analysis of solar flares in which the hard X-rays (HXRs) come predominantly from the corona rather than from the more usual chromospheric footpoints. All of the 26 previously analyzed event time intervals, over 13 flares, are re-examined for consistency with a flare model in which electrons are accelerated near the top of a magnetic loop that has a sufficiently high density to stop most of the electrons by Coulomb collisions before they can reach the footpoints. Of particular importance in the previous analysis was the finding that the length of the coronal HXR source increased with energy in the 20 - 30 keV range. However, after allowing for the possibility that footpoint emission at the higher energies affects the inferred length of the coronal HXR source, and using analysis techniques that suppress the possible influence of such footpoint emission, we conclude that there is no longer evidence that the length of the HXR coronal sources increase with increasing energy. In fact, for the 6 flares and 12 time intervals that satisfied our selection criteria, the loop lengths decreased on average by 1.0 +/- 0.2 arcsec between 20 and 30 keV, with a standard deviation of 3.5 arcsec. We find strong evidence that the peak of the coronal HXR source increases in altitude with increasing energy. For the thermal component of the emission, this is consistent with the standard CHSKP flare model in which magnetic reconnection in a coronal current sheet results in new hot loops being formed at progressively higher altitudes. The explanation for the nonthermal emission is not so clear.
△ Less
Submitted 12 September, 2018;
originally announced September 2018.
-
FLARECAST: an I4.0 technology for space weather using satellite data
Authors:
Michele Piana,
Anna Maria Massone,
Federico Benvenuto,
Cristina Campi
Abstract:
'Flare Likelihood and Region Eruption Forecasting (FLARECAST)' is a Horizon 2020 project, which realized a technological platform for machine learning algorithms, with the objective of providing the space weather community with a prediction service for solar flares. This paper describes the FLARECAST service and shows how the methods implemented in the platform allow both flare prediction and a qu…
▽ More
'Flare Likelihood and Region Eruption Forecasting (FLARECAST)' is a Horizon 2020 project, which realized a technological platform for machine learning algorithms, with the objective of providing the space weather community with a prediction service for solar flares. This paper describes the FLARECAST service and shows how the methods implemented in the platform allow both flare prediction and a quantitative assessment of how the information contained in the space data utilized in the analysis may impact the forecasting process.
△ Less
Submitted 22 June, 2018;
originally announced June 2018.
-
Identification of multiple hard X-ray sources in solar flares: A Bayesian analysis of the February 20 2002 event
Authors:
Federica Sciacchitano,
Alberto Sorrentino,
A Gordon Emslie,
Anna Maria Massone,
Michele Piana
Abstract:
The hard X-ray emission in a solar flare is typically characterized by a number of discrete sources, each with its own spectral, temporal, and spatial variability. Establishing the relationship amongst these sources is critical to determine the role of each in the energy release and transport processes that occur within the flare. In this paper we present a novel method to identify and characteriz…
▽ More
The hard X-ray emission in a solar flare is typically characterized by a number of discrete sources, each with its own spectral, temporal, and spatial variability. Establishing the relationship amongst these sources is critical to determine the role of each in the energy release and transport processes that occur within the flare. In this paper we present a novel method to identify and characterize each source of hard X-ray emission. The method permits a quantitative determination of the most likely number of subsources present, and of the relative probabilities that the hard X-ray emission in a given subregion of the flare is represented by a complicated multiple source structure or by a simpler single source. We apply the method to a well-studied flare on 2002~February~20 in order to assess competing claims as to the number of chromospheric footpoint sources present, and hence to the complexity of the underlying magnetic geometry/toplogy. Contrary to previous claims of the need for multiple sources to account for the chromospheric hard X-ray emission at different locations and times, we find that a simple two-footpoint-plus-coronal-source model is the most probable explanation for the data. We also find that one of the footpoint sources moves quite rapidly throughout the event, a factor that presumably complicated previous analyses. The inferred velocity of the footpoint corresponds to a very high induced electric field, compatible with those in thin reconnecting current sheets.
△ Less
Submitted 12 June, 2018; v1 submitted 27 January, 2018;
originally announced January 2018.
-
Solar hard X-ray imaging by means of Compressed Sensing and Finite Isotropic Wavelet Transform
Authors:
M. A. Duval-Poo,
M. Piana,
A. M. Massone
Abstract:
This paper shows that compressed sensing realized by means of regularized deconvolution and the Finite Isotropic Wavelet Transform is effective and reliable in hard X-ray solar imaging.
The method utilizes the Finite Isotropic Wavelet Transform with Meyer function as the mother wavelet. Further, compressed sensing is realized by optimizing a sparsity-promoting regularized objective function by m…
▽ More
This paper shows that compressed sensing realized by means of regularized deconvolution and the Finite Isotropic Wavelet Transform is effective and reliable in hard X-ray solar imaging.
The method utilizes the Finite Isotropic Wavelet Transform with Meyer function as the mother wavelet. Further, compressed sensing is realized by optimizing a sparsity-promoting regularized objective function by means of the Fast Iterative Shrinkage-Thresholding Algorithm. Eventually, the regularization parameter is selected by means of the Miller criterion.
The method is applied against both synthetic data mimicking the Spectrometer/Telescope Imaging X-rays (STIX) measurements and experimental observations provided by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). The performances of the method are compared with the results provided by standard visibility-based reconstruction methods.
The results show that the application of the sparsity constraint and the use of a continuous, isotropic framework for the wavelet transform provide a notable spatial accuracy and significantly reduce the ringing effects due to the instrument point spread functions.
△ Less
Submitted 13 August, 2017;
originally announced August 2017.
-
A hybrid supervised/unsupervised machine learning approach to solar flare prediction
Authors:
Federico Benvenuto,
Michele Piana,
Cristina Campi,
Anna Maria Massone
Abstract:
We introduce a hybrid approach to solar flare prediction, whereby a supervised regularization method is used to realize feature importance and an unsupervised clustering method is used to realize the binary flare/no-flare decision. The approach is validated against NOAA SWPC data.
We introduce a hybrid approach to solar flare prediction, whereby a supervised regularization method is used to realize feature importance and an unsupervised clustering method is used to realize the binary flare/no-flare decision. The approach is validated against NOAA SWPC data.
△ Less
Submitted 21 June, 2017;
originally announced June 2017.
-
Exploring impulsive solar magnetic energy release and particle acceleration with focused hard X-ray imaging spectroscopy
Authors:
Steven Christe,
Samuel Krucker,
Lindsay Glesener,
Albert Shih,
Pascal Saint-Hilaire,
Amir Caspi,
Joel Allred,
Marina Battaglia,
Bin Chen,
James Drake,
Brian Dennis,
Dale Gary,
Szymon Gburek,
Keith Goetz,
Brian Grefenstette,
Mikhail Gubarev,
Iain Hannah,
Gordon Holman,
Hugh Hudson,
Andrew Inglis,
Jack Ireland,
Shinosuke Ishikawa,
James Klimchuk,
Eduard Kontar,
Adam Kowalski
, et al. (15 additional authors not shown)
Abstract:
How impulsive magnetic energy release leads to solar eruptions and how those eruptions are energized and evolve are vital unsolved problems in Heliophysics. The standard model for solar eruptions summarizes our current understanding of these events. Magnetic energy in the corona is released through drastic restructuring of the magnetic field via reconnection. Electrons and ions are then accelerate…
▽ More
How impulsive magnetic energy release leads to solar eruptions and how those eruptions are energized and evolve are vital unsolved problems in Heliophysics. The standard model for solar eruptions summarizes our current understanding of these events. Magnetic energy in the corona is released through drastic restructuring of the magnetic field via reconnection. Electrons and ions are then accelerated by poorly understood processes. Theories include contracting loops, merging magnetic islands, stochastic acceleration, and turbulence at shocks, among others. Although this basic model is well established, the fundamental physics is poorly understood. HXR observations using grazing-incidence focusing optics can now probe all of the key regions of the standard model. These include two above-the-looptop (ALT) sources which bookend the reconnection region and are likely the sites of particle acceleration and direct heating. The science achievable by a direct HXR imaging instrument can be summarized by the following science questions and objectives which are some of the most outstanding issues in solar physics (1) How are particles accelerated at the Sun? (1a) Where are electrons accelerated and on what time scales? (1b) What fraction of electrons is accelerated out of the ambient medium? (2) How does magnetic energy release on the Sun lead to flares and eruptions? A Focusing Optics X-ray Solar Imager (FOXSI) instrument, which can be built now using proven technology and at modest cost, would enable revolutionary advancements in our understanding of impulsive magnetic energy release and particle acceleration, a process which is known to occur at the Sun but also throughout the Universe.
△ Less
Submitted 3 January, 2017;
originally announced January 2017.
-
DESAT: an SSW tool for SDO/AIA image de-saturation
Authors:
Richard A Schwartz,
Gabriele Torre,
Anna Maria Massone,
Michele Piana
Abstract:
Saturation affects a significant rate of images recorded by the Atmospheric Imaging Assembly on the Solar Dynamics Observatory. This paper describes a computational method and a technological pipeline for the de-saturation of such images, based on several mathematical ingredients like Expectation Maximization, image correlation and interpolation. An analysis of the computational properties and dem…
▽ More
Saturation affects a significant rate of images recorded by the Atmospheric Imaging Assembly on the Solar Dynamics Observatory. This paper describes a computational method and a technological pipeline for the de-saturation of such images, based on several mathematical ingredients like Expectation Maximization, image correlation and interpolation. An analysis of the computational properties and demands of the pipeline, together with an assessment of its reliability are performed against a set of data recorded from the Feburary 25 2014 flaring event.
△ Less
Submitted 8 March, 2015;
originally announced March 2015.
-
Inverse diffraction for the Atmospheric Imaging Assembly in the Solar Dynamics Observatory
Authors:
Gabriele Torre,
Richard A Schwartz,
Federico Benvenuto,
Anna Maria Massone,
Michele Piana
Abstract:
The Atmospheric Imaging Assembly in the Solar Dynamics Observatory provides full Sun images every 1 seconds in each of 7 Extreme Ultraviolet passbands. However, for a significant amount of these images, saturation affects their most intense core, preventing scientists from a full exploitation of their physical meaning. In this paper we describe a mathematical and automatic procedure for the recove…
▽ More
The Atmospheric Imaging Assembly in the Solar Dynamics Observatory provides full Sun images every 1 seconds in each of 7 Extreme Ultraviolet passbands. However, for a significant amount of these images, saturation affects their most intense core, preventing scientists from a full exploitation of their physical meaning. In this paper we describe a mathematical and automatic procedure for the recovery of information in the primary saturation region based on a correlation/inversion analysis of the diffraction pattern associated to the telescope observations. Further, we suggest an interpolation-based method for determining the image background that allows the recovery of information also in the region of secondary saturation (blooming).
△ Less
Submitted 30 January, 2015;
originally announced January 2015.
-
The process of data formation for the Spectrometer/Telescope for Imaging X-rays (STIX) in Solar Orbiter
Authors:
Sara Giordano,
Nicola Pinamonti,
Michele Piana,
Anna Maria Massone
Abstract:
The Spectrometer/Telescope for Imaging X-rays (STIX) is a hard X-ray imaging spectroscopy device to be mounted in the Solar Orbiter cluster with the aim of providing images and spectra of solar flaring regions at different photon energies in the range from a few keV to around 150 keV. The imaging modality of this telescope is based on the Moire pattern concept and utilizes 30 sub-collimators, each…
▽ More
The Spectrometer/Telescope for Imaging X-rays (STIX) is a hard X-ray imaging spectroscopy device to be mounted in the Solar Orbiter cluster with the aim of providing images and spectra of solar flaring regions at different photon energies in the range from a few keV to around 150 keV. The imaging modality of this telescope is based on the Moire pattern concept and utilizes 30 sub-collimators, each one containing a pair of co-axial grids. This paper applies Fourier analysis to provide the first rigorous description of the data formation process in STIX. Specifically, we show that, under first harmonic approximation, the integrated counts measured by STIX sub-collimators can be interpreted as specific spatial Fourier components of the incoming photon flux, named visibilities. Fourier analysis also allows the quantitative assessment of the reliability of such interpretation. The description of STIX data in terms of visibilities has a notable impact on the image reconstruction process, since it fosters the application of Fourier-based imaging algorithms.
△ Less
Submitted 21 December, 2014;
originally announced December 2014.
-
A Systematic Approach to the Reconstruction of Saturated SDO/AIA Images
Authors:
Richard A Schwartz,
Gabriele Torre,
Michele Piana
Abstract:
EUV images of solar flares provided by the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory (SDO/AIA) are often affected by saturation effects in their core, physically most interesting region. We introduce an image reconstruction procedure that allows recovering information in the primary saturation domain using the secondary images produced by the diffraction fringes as input…
▽ More
EUV images of solar flares provided by the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory (SDO/AIA) are often affected by saturation effects in their core, physically most interesting region. We introduce an image reconstruction procedure that allows recovering information in the primary saturation domain using the secondary images produced by the diffraction fringes as input data. Such a procedure is based on standard image-processing tools like correlation, convolution, and back-projection. Its effectiveness is tested in the case of SDO/AIA observations of the July 8 2013 flaring event.
△ Less
Submitted 28 July, 2014;
originally announced July 2014.
-
Return currents and energy transport in the solar flaring atmosphere
Authors:
Anna Codispoti,
Gabriele Torre,
Michele Piana,
Nicola Pinamonti
Abstract:
According to a standard ohmic perspective, the injection of accelerated electrons into the flaring region violates local charge equilibrium and therefore, in response, return currents are driven by an electric field to equilibrate such charge violation. In this framework, the energy loss rate associated to these local currents has an ohmic nature and significantly shortens the acceleration electro…
▽ More
According to a standard ohmic perspective, the injection of accelerated electrons into the flaring region violates local charge equilibrium and therefore, in response, return currents are driven by an electric field to equilibrate such charge violation. In this framework, the energy loss rate associated to these local currents has an ohmic nature and significantly shortens the acceleration electron path. In the present paper we adopt a different viewpoint and, specifically, we study the impact of the background drift velocity on the energy loss rate of accelerated electrons in solar flares. We first utilize the Rutherford cross-section to derive the formula of the energy loss rate when the collisional target has a finite temperature and the background instantaneously and coherently moves up to equilibrate the electron injection. We then use the continuity equation for electrons and imaging spectroscopy data provided by RHESSI to validate this model. Specifically, we show that this new formula for the energy loss rate provides a better fit of the experimental data with respect to the model based on the effects of standard ohmic return currents.
△ Less
Submitted 19 April, 2013;
originally announced April 2013.
-
The Specific Acceleration Rate in Loop-structured Solar Flares -- Implications for Electron Acceleration Models
Authors:
Jingnan Guo,
A. Gordon Emslie,
Michele Piana
Abstract:
We analyze electron flux maps based on RHESSI hard X-ray imaging spectroscopy data for a number of extended coronal loop flare events. For each event, we determine the variation of the characteristic loop length $L$ with electron energy $E$, and we fit this observed behavior with models that incorporate an extended acceleration region and an exterior "propagation" region, and which may include col…
▽ More
We analyze electron flux maps based on RHESSI hard X-ray imaging spectroscopy data for a number of extended coronal loop flare events. For each event, we determine the variation of the characteristic loop length $L$ with electron energy $E$, and we fit this observed behavior with models that incorporate an extended acceleration region and an exterior "propagation" region, and which may include collisional modification of the accelerated electron spectrum inside the acceleration region. The models are characterized by two parameters: the plasma density $n$ in, and the longitudinal extent $L_0$ of, the acceleration region. Determination of the best-fit values of these parameters permits inference of the volume that encompasses the acceleration region and of the total number of particles within it. It is then straightforward to compute values for the emission filling factor and for the {\it specific acceleration rate} (electrons s$^{-1}$ per ambient electron above a chosen reference energy). For the 24 events studied, the range of inferred filling factors is consistent with a value of unity. The inferred mean value of the specific acceleration rate above $E_0=20$ keV is $\sim10^{-2}$ s$^{-1}$, with a 1$σ$ spread of about a half-order-of-magnitude above and below this value. We compare these values with the predictions of several models, including acceleration by large-scale, weak (sub-Dreicer) fields, by strong (super-Dreicer) electric fields in a reconnecting current sheet, and by stochastic acceleration processes.
△ Less
Submitted 5 March, 2013;
originally announced March 2013.
-
Expectation Maximization for Hard X-ray Count Modulation Profiles
Authors:
Federico Benvenuto,
Richard Schwartz,
Michele Piana,
Anna Maria Massone
Abstract:
This paper is concerned with the image reconstruction problem when the measured data are solar hard X-ray modulation profiles obtained from the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI)} instrument. Our goal is to demonstrate that a statistical iterative method classically applied to the image deconvolution problem is very effective when utilized for the analysis of count modul…
▽ More
This paper is concerned with the image reconstruction problem when the measured data are solar hard X-ray modulation profiles obtained from the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI)} instrument. Our goal is to demonstrate that a statistical iterative method classically applied to the image deconvolution problem is very effective when utilized for the analysis of count modulation profiles in solar hard X-ray imaging based on Rotating Modulation Collimators. The algorithm described in this paper solves the maximum likelihood problem iteratively and encoding a positivity constraint into the iterative optimization scheme. The result is therefore a classical Expectation Maximization method this time applied not to an image deconvolution problem but to image reconstruction from count modulation profiles. The technical reason that makes our implementation particularly effective in this application is the use of a very reliable stopping rule which is able to regularize the solution providing, at the same time, a very satisfactory Cash-statistic (C-statistic). The method is applied to both reproduce synthetic flaring configurations and reconstruct images from experimental data corresponding to three real events. In this second case, the performance of Expectation Maximization, when compared to Pixon image reconstruction, shows a comparable accuracy and a notably reduced computational burden; when compared to CLEAN, shows a better fidelity with respect to the measurements with a comparable computational effectiveness. If optimally stopped, Expectation Maximization represents a very reliable method for image reconstruction in the RHESSI context when count modulation profiles are used as input data.
△ Less
Submitted 20 February, 2013;
originally announced February 2013.
-
Regularization of constrained maximum likelihood iterative algorithms by means of statistical stopping rule
Authors:
Federico Benvenuto,
Michele Piana
Abstract:
In this paper we propose a new statistical stopping rule for constrained maximum likelihood iterative algorithms applied to ill-posed inverse problems. To this aim we extend the definition of Tikhonov regularization in a statistical framework and prove that the application of the proposed stopping rule to the Iterative Space Reconstruction Algorithm (ISRA) in the Gaussian case and Expectation Maxi…
▽ More
In this paper we propose a new statistical stopping rule for constrained maximum likelihood iterative algorithms applied to ill-posed inverse problems. To this aim we extend the definition of Tikhonov regularization in a statistical framework and prove that the application of the proposed stopping rule to the Iterative Space Reconstruction Algorithm (ISRA) in the Gaussian case and Expectation Maximization (EM) in the Poisson case leads to well defined regularization methods according to the given definition. We also prove that, if an inverse problem is genuinely ill-posed in the sense of Tikhonov, the same definition is not satisfied when ISRA and EM are optimized by classical stopping rule like Morozov's discrepancy principle, Pearson's test and Poisson discrepancy principle. The stopping rule is illustrated in the case of image reconstruction from data recorded by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). First, by using a simulated image consisting of structures analogous to those of a real solar flare we validate the fidelity and accuracy with which the proposed stopping rule recovers the input image. Second, the robustness of the method is compared with the other classical stopping rules and its advantages are shown in the case of real data recorded by RHESSI during two different flaring events.
△ Less
Submitted 13 December, 2012;
originally announced December 2012.
-
Properties of the Acceleration Regions in Several Loop-structured Solar Flares
Authors:
Jingnan Guo,
A. Gordon Emslie,
Anna Maria Massone,
Michele Piana
Abstract:
Using {\em RHESSI} hard X-ray imaging spectroscopy observations, we analyze electron flux maps for a number of extended coronal loop flares. For each event, we fit a collisional model with an extended acceleration region to the observed variation of loop length with electron energy $E$, resulting in estimates of the plasma density in, and longitudinal extent of, the acceleration region. These quan…
▽ More
Using {\em RHESSI} hard X-ray imaging spectroscopy observations, we analyze electron flux maps for a number of extended coronal loop flares. For each event, we fit a collisional model with an extended acceleration region to the observed variation of loop length with electron energy $E$, resulting in estimates of the plasma density in, and longitudinal extent of, the acceleration region. These quantities in turn allow inference of the number of particles within the acceleration region and hence the filling factor $f$ -- the ratio of the emitting volume to the volume that encompasses the emitting region(s). We obtain values of $f$ that lie mostly between 0.1 and 1.0; the (geometric) mean value is $f = 0.20 \times ÷3.9$, somewhat less than, but nevertheless consistent with, unity. Further, coupling information on the number of particles in the acceleration region with information on the total rate of acceleration of particles above a certain reference energy (obtained from spatially-integrated hard X-ray data) also allows inference of the specific acceleration rate (electron s$^{-1}$ per ambient electron above the chosen reference energy). We obtain a (geometric) mean value of the specific acceleration rate $η(20$ keV) $ = (6.0 \times / ÷3.4) \times 10^{-3}$ electrons s$^{-1}$ per ambient electron; this value has implications both for the global electrodynamics associated with replenishment of the acceleration region and for the nature of the particle acceleration process.
△ Less
Submitted 11 June, 2012;
originally announced June 2012.
-
Determination of the Acceleration Region Size in a Loop-structured Solar Flare
Authors:
Jingnan Guo,
A. Gordon Emslie,
Eduard P. Kontar,
Federico Benvenuto,
Anna Maria Massone,
Michele Piana
Abstract:
In order to study the acceleration and propagation of bremsstrahlung-producing electrons in solar flares, we analyze the evolution of the flare loop size with respect to energy at a variety of times. A GOES M3.7 loop-structured flare starting around 23:55 on 2002 April 14 is studied in detail using \textit{Ramaty High Energy Solar Spectroscopic Imager} (\textit{RHESSI}) observations. We construct…
▽ More
In order to study the acceleration and propagation of bremsstrahlung-producing electrons in solar flares, we analyze the evolution of the flare loop size with respect to energy at a variety of times. A GOES M3.7 loop-structured flare starting around 23:55 on 2002 April 14 is studied in detail using \textit{Ramaty High Energy Solar Spectroscopic Imager} (\textit{RHESSI}) observations. We construct photon and mean-electron-flux maps in 2-keV energy bins by processing observationally-deduced photon and electron visibilities, respectively, through several image-processing methods: a visibility-based forward-fit (FWD) algorithm, a maximum entropy (MEM) procedure and the uv-smooth (UVS) approach. We estimate the sizes of elongated flares (i.e., the length and width of flaring loops) by calculating the second normalized moments of the intensity in any given map. Employing a collisional model with an extended acceleration region, we fit the loop lengths as a function of energy in both the photon and electron domains. The resulting fitting parameters allow us to estimate the extent of the acceleration region which is between $\sim 13 \rm{arcsec}$ and $\sim 19 \rm{arcsec}$. Both forward-fit and uv-smooth algorithms provide substantially similar results with a systematically better fit in the electron domain.The consistency of the estimates from these methods provides strong support that the model can reliably determine geometric parameters of the acceleration region. The acceleration region is estimated to be a substantial fraction ($\sim 1/2$) of the loop extent, indicating that this dense flaring loop incorporates both acceleration and transport of electrons, with concurrent thick-target bremsstrahlung emission.
△ Less
Submitted 3 June, 2012;
originally announced June 2012.
-
Deducing Electron Properties From Hard X-Ray Observations
Authors:
E. P. Kontar,
J. C. Brown,
A. G. Emslie,
W. Hajdas,
G. D. Holman,
G. J. Hurford,
J. Kasparova,
P. C. V. Mallik,
A. M. Massone,
M. L. McConnell,
M. Piana,
M. Prato,
E. J. Schmahl,
E. Suarez-Garcia
Abstract:
X-radiation from energetic electrons is the prime diagnostic of flare-accelerated electrons. The observed X-ray flux (and polarization state) is fundamentally a convolution of the cross-section for the hard X-ray emission process(es) in question with the electron distribution function, which is in turn a function of energy, direction, spatial location and time. To address the problems of particle…
▽ More
X-radiation from energetic electrons is the prime diagnostic of flare-accelerated electrons. The observed X-ray flux (and polarization state) is fundamentally a convolution of the cross-section for the hard X-ray emission process(es) in question with the electron distribution function, which is in turn a function of energy, direction, spatial location and time. To address the problems of particle propagation and acceleration one needs to infer as much information as possible on this electron distribution function, through a deconvolution of this fundamental relationship. This review presents recent progress toward this goal using spectroscopic, imaging and polarization measurements, primarily from the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). Previous conclusions regarding the energy, angular (pitch angle) and spatial distributions of energetic electrons in solar flares are critically reviewed. We discuss the role and the observational evidence of several radiation processes: free-free electron-ion, free-free electron-electron, free-bound electron-ion bremsstrahlung, photoelectric absorption and Compton back-scatter (albedo), using both spectroscopic and imaging techniques. This unprecedented quality of data allows for the first time inference of the angular distributions of the X-ray-emitting electrons using albedo, improved model-independent inference of electron energy spectra and emission measures of thermal plasma. Moreover, imaging spectroscopy has revealed hitherto unknown details of solar flare morphology and detailed spectroscopy of coronal, footpoint and extended sources in flaring regions. Additional attempts to measure hard X-ray polarization were not sufficient to put constraints on the degree of anisotropy of electrons, but point to the importance of obtaining good quality polarization data.
△ Less
Submitted 11 October, 2011; v1 submitted 8 October, 2011;
originally announced October 2011.
-
Fast Spectral Fitting of Hard X-Ray Bremsstrahlung from Truncated Power-Law Electron Spectra
Authors:
J. C. Brown,
J. Kasparova,
A. M. Massone,
M. Piana
Abstract:
Hard X-Ray bremsstrahlung continuum spectra, such as from solar flares, are commonly described in terms of power-law fits, either to the photon spectra themselves or to the electron spectra responsible for them. In applications various approximate relations between electron and photon spectral indices are often used for energies both above and below electron low-energy cutoffs. We examine the fo…
▽ More
Hard X-Ray bremsstrahlung continuum spectra, such as from solar flares, are commonly described in terms of power-law fits, either to the photon spectra themselves or to the electron spectra responsible for them. In applications various approximate relations between electron and photon spectral indices are often used for energies both above and below electron low-energy cutoffs. We examine the form of the exact relationships in various situations, and for various cross-sections, showing that empirical relations sometimes used can be highly misleading and consider how to improve fitting procedures. We obtain expressions for photon spectra from single, double and truncated power-law electron spectra for a variety of cross-sections and for the thin and thick target models and simple analytic expressions for the Bethe-Heitler cases. We show that above a low-energy cutoff the Kramers and Bethe-Heitler results match reasonably well with results for exact cross-sections up to energies around 100 keV; that below the low-energy cutoff, Kramers and other constant spectral index forms commonly used are very poor approximations to accurate results; but that our analytical forms are a very good match. Analytical forms of the Bethe-Heitler photon spectra from general power-law electron spectra are an excellent match to exact results for both thin and thick targets and they enable much faster spectral fitting than evaluation of the full spectral integrations.
△ Less
Submitted 5 February, 2008;
originally announced February 2008.
-
Electron-Electron Bremsstrahlung Emission and the Inference of Electron Flux Spectra in Solar Flares
Authors:
Eduard P. Kontar,
A. Gordon Emslie,
Anna Maria Massone,
Michele Piana,
John C. Brown,
Marco Prato
Abstract:
Although both electron-ion and electron-electron bremsstrahlung contribute to the hard X-ray emission from solar flares, the latter is normally ignored. Such an omission is not justified at electron (and photon) energies above $\sim 300$ keV, and inclusion of the additional electron-electron bremsstrahlung in general makes the electron spectrum required to produce a given hard X-ray spectrum ste…
▽ More
Although both electron-ion and electron-electron bremsstrahlung contribute to the hard X-ray emission from solar flares, the latter is normally ignored. Such an omission is not justified at electron (and photon) energies above $\sim 300$ keV, and inclusion of the additional electron-electron bremsstrahlung in general makes the electron spectrum required to produce a given hard X-ray spectrum steeper at high energies.
Unlike electron-ion bremsstrahlung, electron-electron bremsstrahlung cannot produce photons of all energies up to the maximum electron energy involved. The maximum possible photon energy depends on the angle between the direction of the emitting electron and the emitted photon, and this suggests a diagnostic for an upper cutoff energy and/or for the degree of beaming of the accelerated electrons.
We analyze the large event of January 17, 2005 observed by RHESSI and show that the upward break around 400 keV in the observed hard X-ray spectrum is naturally accounted for by the inclusion of electron-electron bremsstrahlung. Indeed, the mean source electron spectrum recovered through a regularized inversion of the hard X-ray spectrum, using a cross-section that includes both electron-ion and electron-electron terms, has a relatively constant spectral index $δ$ over the range from electron kinetic energy $E = 200$ keV to $E = 1$ MeV. However, the level of detail discernible in the recovered electron spectrum is not sufficient to determine whether or not any upper cutoff energy exists.
△ Less
Submitted 28 July, 2007;
originally announced July 2007.