-
GPI 2.0: Exploring The Impact of Different Readout Modes on the Wavefront Sensor's EMCCD
Authors:
Clarissa R. Do Ó,
Saavidra Perera,
Jérôme Maire,
Jayke S. Nguyen,
Vincent Chambouleyron,
Quinn M. Konopacky,
Jeffrey Chilcote,
Joeleff Fitzsimmons,
Randall Hamper,
Dan Kerley,
Bruce Macintosh,
Christian Marois,
Fredrik Rantakyrö,
Dmitry Savranksy,
Jean-Pierre Veran,
Guido Agapito,
S. Mark Ammons,
Marco Bonaglia,
Marc-Andre Boucher,
Jennifer Dunn,
Simone Esposito,
Guillaume Filion,
Jean Thomas Landry,
Olivier Lardiere,
Duan Li
, et al. (4 additional authors not shown)
Abstract:
The Gemini Planet Imager (GPI) is a high contrast imaging instrument that aims to detect and characterize extrasolar planets. GPI is being upgraded to GPI 2.0, with several subsystems receiving a re-design to improve its contrast. To enable observations on fainter targets and increase performance on brighter ones, one of the upgrades is to the adaptive optics system. The current Shack-Hartmann wav…
▽ More
The Gemini Planet Imager (GPI) is a high contrast imaging instrument that aims to detect and characterize extrasolar planets. GPI is being upgraded to GPI 2.0, with several subsystems receiving a re-design to improve its contrast. To enable observations on fainter targets and increase performance on brighter ones, one of the upgrades is to the adaptive optics system. The current Shack-Hartmann wavefront sensor (WFS) is being replaced by a pyramid WFS with an low-noise electron multiplying CCD (EMCCD). EMCCDs are detectors capable of counting single photon events at high speed and high sensitivity. In this work, we characterize the performance of the HNü 240 EMCCD from Nüvü Cameras, which was custom-built for GPI 2.0. Through our performance evaluation we found that the operating mode of the camera had to be changed from inverted-mode (IMO) to non-inverted mode (NIMO) in order to improve charge diffusion features found in the detector's images. Here, we characterize the EMCCD's noise contributors (readout noise, clock-induced charges, dark current) and linearity tests (EM gain, exposure time) before and after the switch to NIMO.
△ Less
Submitted 2 October, 2024;
originally announced October 2024.
-
Estimating Atmospheric Wind Speeds From Gemini Planet Imager AO Telemetry
Authors:
Zhenxi Du,
Saavidra Perera,
Daniel Levinstein,
Quinn Konopacky,
Alex Madurowicz,
Bruce Macintosh,
Lisa Poyneer,
Richard Wilson,
Ollie Farley
Abstract:
The Earth's atmosphere is comprised of turbulent layers that result in speckled and blurry images from ground-based visible and infrared observations. Adaptive Optics (AO) systems are employed to measure the perturbed wavefront with a wavefront sensor (WFS) and correct for these distortions with a deformable mirror. Therefore, understanding and characterising the atmosphere is crucial for the desi…
▽ More
The Earth's atmosphere is comprised of turbulent layers that result in speckled and blurry images from ground-based visible and infrared observations. Adaptive Optics (AO) systems are employed to measure the perturbed wavefront with a wavefront sensor (WFS) and correct for these distortions with a deformable mirror. Therefore, understanding and characterising the atmosphere is crucial for the design and functionality of AO systems. One parameter for characterizing the atmosphere is the atmospheric coherence time, which is a function of the effective wind velocity of the atmosphere. This parameter dictates how fast the AO system needs to correct for the atmosphere. If not fast enough, phenomena such as the wind butterfly effect can occur, hindering high-contrast coronographic imaging. This effect is a result of fast, strong, high-altitude turbulent layers. This paper presents two methods for estimating the effective wind velocity, using pseudo-open loop WFS slopes. The first method uses a spatial-temporal covariance map and the second uses the power spectral density of the defocus term. We show both simulated results and preliminary results from the Gemini Planet Imager AO telemetry.
△ Less
Submitted 1 October, 2024;
originally announced October 2024.
-
SHIMM as an atmospheric profiler on the Nickel Telescope
Authors:
Ollie Jackson,
Maaike A. M. van Kooten,
Saavidra Perera,
Rebecca Jensen-Clem,
Phil Hinz
Abstract:
Optimal atmospheric conditions are beneficial for detecting exoplanets via high contrast imaging (HCI), as speckles from adaptive optics' (AO's) residuals can make it difficult to identify exoplanets. While AO systems greatly improve our image quality, having access to real-time estimates of atmospheric conditions could also help astronomers use their telescope time more efficiently in the search…
▽ More
Optimal atmospheric conditions are beneficial for detecting exoplanets via high contrast imaging (HCI), as speckles from adaptive optics' (AO's) residuals can make it difficult to identify exoplanets. While AO systems greatly improve our image quality, having access to real-time estimates of atmospheric conditions could also help astronomers use their telescope time more efficiently in the search for exoplanets as well as aid in the data reduction process. The Shack-Hartmann Imaging Motion Monitor (SHIMM) is an atmospheric profiler that utilizes a Shack-Hartmann wavefront sensor to create spot images of a single star in order to reconstruct important atmospheric parameters such as the Fried parameter ($r_0$), $C_n^2$ profile and coherence time. Due to its simplicity, the SHIMM can be directly used on a telescope to get in situ measurements while observing. We present our implementation of the Nickel-SHIMM design for the one meter Nickel Telescope at Lick Observatory. We utilize an HCIPy simulation of turbulence propagating across a telescope aperture to verify the SHIMM data reduction pipeline as we begin on-sky testing. We also used on-sky data from the AO system on the Shane Telescope to further validate our analysis, finding that both our simulation and data reduction pipeline are consistent with previously determined results for the Fried parameter at the Lick Observatory. Finally, we present first light results from commissioning of the Nickel-SHIMM.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
GPI 2.0: Performance Evaluation of the Wavefront Sensor's EMCCD
Authors:
Clarissa R. Do Ó,
Saavidra Perera,
Jérôme Maire,
Jayke S. Nguyen,
Vincent Chambouleyron,
Quinn M. Konopacky,
Jeffrey Chilcote,
Joeleff Fitzsimmons,
Randall Hamper,
Dan Kerley,
Bruce Macintosh,
Christian Marois,
Fredrik Rantakyrö,
Dmitry Savranksy,
Jean-Pierre Veran,
Guido Agapito,
S. Mark Ammons,
Marco Bonaglia,
Marc-Andre Boucher,
Jennifer Dunn,
Simone Esposito,
Guillaume Filion,
Jean Thomas Landry,
Olivier Lardiere,
Duan Li
, et al. (4 additional authors not shown)
Abstract:
The Gemini Planet Imager (GPI) is a high contrast imaging instrument that aims to detect and characterize extrasolar planets. GPI is being upgraded to GPI 2.0, with several subsystems receiving a re-design to improve the instrument's contrast. To enable observations on fainter targets and increase stability on brighter ones, one of the upgrades is to the adaptive optics system. The current Shack-H…
▽ More
The Gemini Planet Imager (GPI) is a high contrast imaging instrument that aims to detect and characterize extrasolar planets. GPI is being upgraded to GPI 2.0, with several subsystems receiving a re-design to improve the instrument's contrast. To enable observations on fainter targets and increase stability on brighter ones, one of the upgrades is to the adaptive optics system. The current Shack-Hartmann wavefront sensor (WFS) is being replaced by a pyramid WFS with an low-noise electron multiplying CCD (EMCCD). EMCCDs are detectors capable of counting single photon events at high speed and high sensitivity. In this work, we characterize the performance of the HNü 240 EMCCD from Nüvü Cameras, which was custom-built for GPI 2.0. The HNü 240 EMCCD's characteristics make it well suited for extreme AO: it has low dark current ($<$ 0.01 e-/pix/fr), low readout noise (0.1 e-/pix/fr at a gain of 5000), high quantum efficiency ( 90% at wavelengths from 600-800 nm; 70% from 800-900 nm), and fast readout (up to 3000 fps full frame). Here we present test results on the EMCCD's noise contributors, such as the readout noise, pixel-to-pixel variability and CCD bias. We also tested the linearity and EM gain calibration of the detector. All camera tests were conducted before its integration into the GPI 2.0 PWFS system.
△ Less
Submitted 9 October, 2023;
originally announced October 2023.
-
SHIMM: A Versatile Seeing Monitor for Astronomy
Authors:
Saavidra Perera,
Richard W. Wilson,
Tim Butterley,
James Osborn,
Ollie J. D. Farley,
Douglas J. Laidlaw
Abstract:
Characterisation of atmospheric optical turbulence is crucial for the design and operation of modern ground-based optical telescopes. In particular, the effective application of adaptive optics correction on large and extremely large telescopes relies on a detailed knowledge of the prevailing atmospheric conditions, including the vertical profile of the optical turbulence strength and the atmosphe…
▽ More
Characterisation of atmospheric optical turbulence is crucial for the design and operation of modern ground-based optical telescopes. In particular, the effective application of adaptive optics correction on large and extremely large telescopes relies on a detailed knowledge of the prevailing atmospheric conditions, including the vertical profile of the optical turbulence strength and the atmospheric coherence timescale. The Differential Image Motion Monitor (DIMM) has been employed as a facility seeing monitor at many astronomical observing sites across the world for several decades, providing a reliable estimate of the seeing angle. Here we present the Shack-Hartmann Image Motion Monitor (SHIMM), which is a development of the DIMM instrument, in that it exploits differential image motion measurements of bright target stars. However, the SHIMM employs a Shack-Hartmann wavefront sensor in place of the two-hole aperture mask utilised by the DIMM. This allows the SHIMM to provide an estimate of the seeing, unbiased by shot noise or scintillation effects. The SHIMM also produces a low-resolution (three-layer) measure of the vertical turbulence profile, as well as an estimate of the coherence timescale. The SHIMM is designed as a low-cost, portable, instrument. It is comprised of off-the-shelf components so that it is easy to duplicate and well-suited for comparisons of atmospheric conditions within and between different observing sites. Here, the SHIMM design and methodology for estimating key atmospheric parameters will be presented, as well as initial field test results with comparisons to the Stereo-SCIDAR instrument.
△ Less
Submitted 28 February, 2023;
originally announced March 2023.
-
Estimating effective wind speed from Gemini Planet Imager's adaptive optics data using covariance maps
Authors:
Daniel M. Levinstein,
Saavidra Perera,
Quinn M. Konopacky,
Alex Madurowicz,
Bruce Macintosh,
Lisa Poyneer,
Richard W. Wilson
Abstract:
The Earth's turbulent atmosphere results in speckled and blurred images of astronomical objects when observed by ground based visible and near-infrared telescopes. Adaptive optics (AO) systems are employed to reduce these atmospheric effects by using wavefront sensors (WFS) and deformable mirrors. Some AO systems are not fast enough to correct for strong, fast, high turbulence wind layers leading…
▽ More
The Earth's turbulent atmosphere results in speckled and blurred images of astronomical objects when observed by ground based visible and near-infrared telescopes. Adaptive optics (AO) systems are employed to reduce these atmospheric effects by using wavefront sensors (WFS) and deformable mirrors. Some AO systems are not fast enough to correct for strong, fast, high turbulence wind layers leading to the wind butterfly effect, or wind-driven halo, reducing contrast capabilities in coronagraphic images. Estimating the effective wind speed of the atmosphere allows us to calculate the atmospheric coherence time. This is not only an important parameter to understand for site characterization but could be used to help remove the wind butterfly in post processing. Here we present a method for estimating the atmospheric effective wind speed from spatio-temporal covariance maps generated from pseudo open-loop (POL) WFS data. POL WFS data is used as it aims to reconstruct the full wavefront information when operating in closed-loop. The covariance maps show how different atmospheric turbulent layers traverse the telescope. Our method successfully recovered the effective wind speed from simulated WFS data generated with the soapy python library. The simulated atmospheric turbulence profiles consist of two turbulent layers of ranging strengths and velocities. The method has also been applied to Gemini Planet Imager (GPI) AO WFS data. This gives insight into how the effective wind speed can affect the wind-driven halo seen in the AO image point spread function. In this paper, we will present results from simulated and GPI WFS data.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
P-REx II. Off-line Performance on VLTI/GRAVITY
Authors:
Saavidra Perera,
Jörg-Uwe Pott,
Julien Woillez,
Martin Kulas,
Wolfgang Brandner,
Sylvestre Lacour,
Felix Widmann
Abstract:
For sensitive optical interferometry, it is crucial to control the evolution of the optical path difference (OPD) of the wavefront between the individual telescopes of the array. The OPD between a pair of telescopes is induced by differential optical properties such as atmospheric refraction, telescope alignment, etc. This has classically been measured using a fringe tracker that provides correcti…
▽ More
For sensitive optical interferometry, it is crucial to control the evolution of the optical path difference (OPD) of the wavefront between the individual telescopes of the array. The OPD between a pair of telescopes is induced by differential optical properties such as atmospheric refraction, telescope alignment, etc. This has classically been measured using a fringe tracker that provides corrections to a piston actuator to account for this difference. An auxiliary method, known as the Piston Reconstruction Experiment (P-REx) has been developed to measure the OPD, or differential 'piston' of the wavefront, induced by the atmosphere at each telescope. Previously, this method was outlined and results obtained from LBT adaptive optics (AO) data for a single telescope aperture were presented. P-REx has now been applied off-line to previously acquired VLT's GRAVITY CIAO wavefront sensing data to estimate the atmospheric OPD for the six VLTI baselines. Comparisons with the OPD obtained from the VLTI GRAVITY fringe tracker were made. The results indicate that the telescope and instrumental noise of the combined VLTI and GRAVITY systems dominate over the atmospheric turbulence contributions. However, good agreement between simulated and on-sky P-REx data indicates that if the telescope and instrumental noise were reduced to atmospheric piston noise levels, P-REx has the potential to reduce the OPD root mean square of piston turbulence by up to a factor of 10 for frequencies down to 1 Hz. In such conditions, P-REx will assist in pushing the sensitivity limits of optical fringe tracking with long baseline interferometers.
△ Less
Submitted 23 December, 2021;
originally announced December 2021.
-
The HOSTS survey for exozodiacal dust: Observational results from the complete survey
Authors:
Steve Ertel,
Denis Defrère,
Philip M. Hinz,
Bertrand Mennesson,
Grant M. Kennedy,
William C. Danchi,
Christopher Gelino,
John M. Hill,
William F. Hoffmann,
Johan Mazoyer,
George Rieke,
Andrew Shannon,
Karl Stapelfeldt,
Eckhart Spalding,
Jordan M. Stone,
Amali Vaz,
Alycia J. Weinberger,
Phil Willems,
Olivier Absil,
Paul Arbo,
Vanessa P. Bailey,
Charles Beichman,
Geoffrey Bryden,
Elwood C. Downey,
Olivier Durney
, et al. (21 additional authors not shown)
Abstract:
The Large Binocular Telescope Interferometer (LBTI) enables nulling interferometric observations across the N band (8 to 13 um) to suppress a star's bright light and probe for faint circumstellar emission. We present and statistically analyze the results from the LBTI/HOSTS (Hunt for Observable Signatures of Terrestrial Systems) survey for exozodiacal dust. By comparing our measurements to model p…
▽ More
The Large Binocular Telescope Interferometer (LBTI) enables nulling interferometric observations across the N band (8 to 13 um) to suppress a star's bright light and probe for faint circumstellar emission. We present and statistically analyze the results from the LBTI/HOSTS (Hunt for Observable Signatures of Terrestrial Systems) survey for exozodiacal dust. By comparing our measurements to model predictions based on the Solar zodiacal dust in the N band, we estimate a 1 sigma median sensitivity of 23 zodis for early type stars and 48 zodis for Sun-like stars, where 1 zodi is the surface density of habitable zone (HZ) dust in the Solar system. Of the 38 stars observed, 10 show significant excess. A clear correlation of our detections with the presence of cold dust in the systems was found, but none with the stellar spectral type or age. The majority of Sun-like stars have relatively low HZ dust levels (best-fit median: 3 zodis, 1 sigma upper limit: 9 zodis, 95% confidence: 27 zodis based on our N band measurements), while ~20% are significantly more dusty. The Solar system's HZ dust content is consistent with being typical. Our median HZ dust level would not be a major limitation to the direct imaging search for Earth-like exoplanets, but more precise constraints are still required, in particular to evaluate the impact of exozodiacal dust for the spectroscopic characterization of imaged exo-Earth candidates.
△ Less
Submitted 6 March, 2020;
originally announced March 2020.
