-
Infrared bubble recognition in the Milky Way and beyond using deep learning
Authors:
Shimpei Nishimoto,
Toshikazu Onishi,
Atsushi Nishimura,
Shinji Fujita,
Yasutomo Kawanishi,
Shuyo Nakatani,
Kazuki Tokuda,
Yoshito Shimajiri,
Hiroyuki Kaneko,
Yusuke Miyamoto,
Tsuyoshi Inoue,
Atsushi M Ito
Abstract:
We propose a deep learning model that can detect Spitzer bubbles accurately using two-wavelength near-infrared data acquired by the Spitzer Space Telescope and JWST. The model is based on the Single Shot MultiBox Detector as an object detection model, trained and validated using Spitzer bubbles identified by the Milky Way Project (MWP-Bubble). We found that using only MWP-Bubbles with clear struct…
▽ More
We propose a deep learning model that can detect Spitzer bubbles accurately using two-wavelength near-infrared data acquired by the Spitzer Space Telescope and JWST. The model is based on the Single Shot MultiBox Detector as an object detection model, trained and validated using Spitzer bubbles identified by the Milky Way Project (MWP-Bubble). We found that using only MWP-Bubbles with clear structures, along with normalization and data augmentation, significantly improved performance. To reduce the dataset bias, we also use the data without bubbles in the dataset selected by combining two techniques: negative sampling and clustering. The model was optimized by hyperparameter tuning using Bayesian optimization. Applying this model to a test region of the Galactic plane resulted in a 98 $\%$ detection rate for MWP-Bubbles with 8 $μ$ m emission clearly encompassing 24 $μ$ m emission. Additionally, we applied the model to a broader area of $1^\circ \leq |l| \leq 65^\circ$, $|b| \leq 1^\circ$, including both training and validation regions, and the model detected 3,006 bubbles, of which 1,413 were newly detected. We also attempted to detect bubbles in the high-mass star-forming region Cygnus $X$, as well as in the external galaxies Large Magellanic Cloud (LMC) and NGC 628. The model successfully detected Spitzer bubbles in these external galaxies, though it also detected Mira-type variable stars and other compact sources that can be difficult to distinguish from Spitzer bubbles. The detection process takes only a few hours, demonstrating the efficiency in detecting bubble structures. Furthermore, the method used for detecting Spitzer bubbles was applied to detect shell-like structures observable only in the 8 $μ$ m emission band, leading to the detection of 469 shell-like structures in the LMC and 143 in NGC 628.
△ Less
Submitted 4 April, 2025;
originally announced April 2025.
-
Predicting reliable H$_2$ column density maps from molecular line data using machine learning
Authors:
Yoshito Shimajiri,
Yasutomo Kawanishi,
Shinji Fujita,
Yusuke Miyamoto,
Atsushi M. Ito,
Doris Arzoumanian,
Philippe André,
Atsushi Nishimura,
Kazuki Tokuda,
Hiroyuki Kaneko,
Shunya Takekawa,
Shota Ueda,
Toshikazu Onishi,
Tsuyoshi Inoue,
Shimpei Nishimoto,
Ryuki Yoneda
Abstract:
The total mass estimate of molecular clouds suffers from the uncertainty in the H$_2$-CO conversion factor, the so-called $X_{\rm CO}$ factor, which is used to convert the $^{12}$CO (1--0) integrated intensity to the H$_2$ column density. We demonstrate the machine learning's ability to predict the H$_2$ column density from the $^{12}$CO, $^{13}$CO, and C$^{18}$O (1--0) data set of four star-formi…
▽ More
The total mass estimate of molecular clouds suffers from the uncertainty in the H$_2$-CO conversion factor, the so-called $X_{\rm CO}$ factor, which is used to convert the $^{12}$CO (1--0) integrated intensity to the H$_2$ column density. We demonstrate the machine learning's ability to predict the H$_2$ column density from the $^{12}$CO, $^{13}$CO, and C$^{18}$O (1--0) data set of four star-forming molecular clouds; Orion A, Orion B, Aquila, and M17. When the training is performed on a subset of each cloud, the overall distribution of the predicted column density is consistent with that of the Herschel column density. The total column density predicted and observed is consistent within 10\%, suggesting that the machine learning prediction provides a reasonable total mass estimate of each cloud. However, the distribution of the column density for values $> \sim 2 \times 10^{22}$ cm$^{-2}$, which corresponds to the dense gas, could not be predicted well. This indicates that molecular line observations tracing the dense gas are required for the training. We also found a significant difference between the predicted and observed column density when we created the model after training the data on different clouds. This highlights the presence of different $X_{\rm CO}$ factors between the clouds, and further training in various clouds is required to correct for these variations. We also demonstrated that this method could predict the column density toward the area not observed by Herschel if the molecular line and column density maps are available for the small portion, and the molecular line data are available for the larger areas.
△ Less
Submitted 13 September, 2023;
originally announced September 2023.
-
Distance determination of molecular clouds in the 1st quadrant of the Galactic plane using deep learning : I. Method and Results
Authors:
Shinji Fujita,
A. M. Ito,
Yusuke Miyamoto,
Yasutomo Kawanishi,
Kazufumi Torii,
Yoshito Shimajiri,
Atsushi Nishimura,
Kazuki Tokuda,
Toshikazu Ohnishi,
Hiroyuki Kaneko,
Tsuyoshi Inoue,
Shunya Takekawa,
Mikito Kohno,
Shota Ueda,
Shimpei Nishimoto,
Ryuki Yoneda,
Kaoru Nishikawa,
Daisuke Yoshida
Abstract:
Machine learning has been successfully applied in varied field but whether it is a viable tool for determining the distance to molecular clouds in the Galaxy is an open question. In the Galaxy, the kinematic distance is commonly employed as the distance to a molecular cloud. However, there is a problem in that for the inner Galaxy, two different solutions, the ``Near'' solution, and the ``Far'' so…
▽ More
Machine learning has been successfully applied in varied field but whether it is a viable tool for determining the distance to molecular clouds in the Galaxy is an open question. In the Galaxy, the kinematic distance is commonly employed as the distance to a molecular cloud. However, there is a problem in that for the inner Galaxy, two different solutions, the ``Near'' solution, and the ``Far'' solution, can be derived simultaneously. We attempted to construct a two-class (``Near'' or ``Far'') inference model using a Convolutional Neural Network (CNN), a form of deep learning that can capture spatial features generally. In this study, we used the CO dataset toward the 1st quadrant of the Galactic plane obtained with the Nobeyama 45-m radio telescope (l = 62-10 degree, |b| < 1 degree). In the model, we applied the three-dimensional distribution (position-position-velocity) of the 12CO (J=1-0) emissions as the main input. The dataset with ``Near'' or ``Far'' annotation was made from the HII region catalog of the infrared astronomy satellite WISE to train the model. As a result, we could construct a CNN model with a 76% accuracy rate on the training dataset. By using the model, we determined the distance to molecular clouds identified by the CLUMPFIND algorithm. We found that the mass of the molecular clouds with a distance of < 8.15 kpc identified in the 12CO data follows a power-law distribution with an index of about -2.3 in the mass range of M >10^3 Msun. Also, the detailed molecular gas distribution of the Galaxy as seen from the Galactic North pole was determined.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
Development of a new wideband heterodyne receiver system for the Osaka 1.85-m mm-submm telescope -- Corrugated horn & Optics covering 210-375 GHz band
Authors:
Yasumasa Yamasaki,
Sho Masui,
Hideo Ogawa,
Hiroshi Kondo,
Takeru Matsumoto,
Masanari Okawa,
Koki Yokoyama,
Taisei Minami,
Ryotaro Konishi,
Sana Kawashita,
Ayu Konishi,
Yuka Nakao,
Shimpei Nishimoto,
Sho Yoneyama,
Shota Ueda,
Yutaka Hasegawa,
Shinji Fujita,
Atsushi Nishimura,
Takafumi Kojima,
Keiko Kaneko,
Ryo Sakai,
Alvaro Gonzalez,
Yoshinori Uzawa,
Toshikazu Onishi
Abstract:
The corrugated horn is a high performance feed often used in radio telescopes. There has been a growing demand for wideband optics and corrugated horns in millimeter and submillimeter-wave receivers. It improves the observation efficiency and allows us to observe important emission lines such as CO in multiple excited states simultaneously. However, in the millimeter/submillimeter band, it has bee…
▽ More
The corrugated horn is a high performance feed often used in radio telescopes. There has been a growing demand for wideband optics and corrugated horns in millimeter and submillimeter-wave receivers. It improves the observation efficiency and allows us to observe important emission lines such as CO in multiple excited states simultaneously. However, in the millimeter/submillimeter band, it has been challenging to create a conical corrugated horn with a fractional bandwidth of ~60% because the wavelength is very short, making it difficult to make narrow corrugations. In this study, we designed a conical corrugated horn with good return loss, low cross-polarization, and symmetric beam pattern in the 210-375GHz band (56% fractional bandwidth) by optimizing the dimensions of the corrugations. The corrugated horn was installed on the Osaka 1.85-m mm-submm telescope with the matched frequency-independent optics, and simultaneous observations of 12CO, 13CO, and C18O (J = 2-1, 3-2) were successfully made. In this paper, we describe the new design of the corrugated horn and report the performance evaluation results including the optics.
△ Less
Submitted 31 May, 2021; v1 submitted 28 May, 2021;
originally announced May 2021.
-
Development of a new wideband heterodyne receiver system for the Osaka 1.85-m mm-submm telescope -- Receiver development & the first light of simultaneous observation in 230GHz and 345GHz bands with an SIS-mixer with 4-21GHz IF output
Authors:
Sho Masui,
Yasumasa Yamasaki,
Hideo Ogawa,
Hiroshi Kondo,
Koki Yokoyama,
Takeru Matsumoto,
Taisei Minami,
Masanari Okawa,
Ryotaro Konishi,
Sana Kawashita,
Ayu Konishi,
Yuka Nakao,
Shimpei Nishimoto,
Sho Yoneyama,
Shota Ueda,
Yutaka Hasegawa,
Shinji Fujita,
Atsushi Nishimura,
Takafumi Kojima,
Kazunori Uemizu,
Keiko Kaneko,
Ryo Sakai,
Alvaro Gonzalez,
Yoshinori Uzawa,
Toshikazu Onishi
Abstract:
We have developed a wideband receiver system for simultaneous observations in CO lines of J = 2-1 and J = 3-2 transitions using the Osaka 1.85-m mm-submm telescope. As a frequency separation system, we developed multiplexers that connect three types of diplexers, each consisting of branch-line couplers and high-pass filters. The radio frequency (RF) signal is eventually distributed into four frequ…
▽ More
We have developed a wideband receiver system for simultaneous observations in CO lines of J = 2-1 and J = 3-2 transitions using the Osaka 1.85-m mm-submm telescope. As a frequency separation system, we developed multiplexers that connect three types of diplexers, each consisting of branch-line couplers and high-pass filters. The radio frequency (RF) signal is eventually distributed into four frequency bands, each of which is fed to a superconductor-insulator-superconductor (SIS) mixer. The RF signal from the horn is divided into two frequency bands by a wideband diplexer with a fractional bandwidth of 56%, and then each frequency band is further divided into two bands by each diplexer. The developed multiplexers were designed, fabricated, and characterized using a vector network analyzer. The measurement results showed good agreement with the simulation. The receiver noise temperature was measured by connecting the SIS-mixers, one of which has a wideband 4-21GHz intermediate frequency (IF) output. The receiver noise temperatures were measured to be ~70K in the 220GHz band, ~100K in the 230GHz band, 110-175K in the 330GHz band, and 150-250K in the 345GHz band. This receiver system has been installed on the 1.85-m telescope at the Nobeyama Radio Observatory. We succeeded in the simultaneous observations of six CO isotopologue lines with the transitions of J = 2-1 and J = 3-2 toward the Orion KL as well as the on-the-fly (OTF) mappings toward the Orion KL and W 51.
△ Less
Submitted 17 May, 2021;
originally announced May 2021.
-
Current status and future plan of Osaka Prefecture University 1.85-m mm-submm telescope project
Authors:
Atsushi Nishimura,
Kazuki Tokuda,
Ryohei Harada,
Yutaka Hasegawa,
Shota Ueda,
Sho Masui,
Ryotaro Konishi,
Yasumasa Yamasaki,
Hiroshi Kondo,
Koki Yokoyama,
Takeru Matsumoto,
Taisei Minami,
Masanari Okawa,
Shinji Fujita,
Ayu Konishi,
Yuka Nakao,
Shimpei Nishimoto,
Sana Kawashita,
Sho Yoneyama,
Tatsuyuki Takashima,
Kenta Goto,
Nozomi Okada,
Kimihiro Kimura,
Yasuhiro Abe,
Kazuyuki Muraoka
, et al. (3 additional authors not shown)
Abstract:
We report the current status of the 1.85-m mm-submm telescope installed at the Nobeyama Radio Observatory (altitude 1400 m) and the future plan. The scientific goal is to reveal the physical/chemical properties of molecular clouds in the Galaxy by obtaining large-scale distributions of molecular gas with an angular resolution of several arcminutes. A semi-automatic observation system created mainl…
▽ More
We report the current status of the 1.85-m mm-submm telescope installed at the Nobeyama Radio Observatory (altitude 1400 m) and the future plan. The scientific goal is to reveal the physical/chemical properties of molecular clouds in the Galaxy by obtaining large-scale distributions of molecular gas with an angular resolution of several arcminutes. A semi-automatic observation system created mainly in Python on Linux-PCs enables effective operations. A large-scale CO $J=$2--1 survey of the molecular clouds (e.g., Orion-A/B, Cygnus-X/OB7, Taurus-California-Perseus complex, and Galactic Plane), and a pilot survey of emission lines from minor molecular species toward Orion clouds have been conducted so far. The telescope also is providing the opportunities for technical demonstrations of new devices and ideas. For example, the practical realizations of PLM (Path Length Modulator) and waveguide-based sideband separating filter, installation of the newly designed waveguide-based circular polarizer and OMT (Orthomode Transducer), and so on. As the next step, we are now planning to relocate the telescope to San Pedro de Atacama in Chile (altitude 2500 m), and are developing very wideband receiver covering 210--375 GHz (corresponding to Bands 6--7 of ALMA) and full-automatic observation system. The new telescope system will provide large-scale data in the spatial and frequency domain of molecular clouds of Galactic plane and Large/Small Magellanic Clouds at the southern hemisphere. The data will be precious for the comparison with those of extra-galactic ones that will be obtained with ALMA as the Bands 6/7 are the most efficient frequency bands for the surveys in extra-galaxies for ALMA.
△ Less
Submitted 1 December, 2020;
originally announced December 2020.
-
Nowcast of an EUV dynamic spectrum during solar flares
Authors:
Toshiki Kawai,
Shinsuke Imada,
Shohei Nishimoto,
Kyoko Watanabe,
Tomoko Kawate
Abstract:
In addition to X-rays, extreme ultraviolet (EUV) rays radiated from solar flares can cause serious problems, such as communication failures and satellite drag. Therefore, methods for forecasting EUV dynamic spectra during flares are urgently required. Recently, however, owing to the lack of instruments, EUV dynamic spectra have rarely been observed. Hence, we develop a new method that converts the…
▽ More
In addition to X-rays, extreme ultraviolet (EUV) rays radiated from solar flares can cause serious problems, such as communication failures and satellite drag. Therefore, methods for forecasting EUV dynamic spectra during flares are urgently required. Recently, however, owing to the lack of instruments, EUV dynamic spectra have rarely been observed. Hence, we develop a new method that converts the soft X-ray light curve observed during large flare events into an EUV dynamic spectrum by using the Solar Dynamics Observatory / Atmospheric Imaging Assembly images, a numerical simulation, and atomic database. The simulation provides the solution for a coronal loop that is heated by a strong flare, and the atomic database calculates its dynamic spectrum, including X-ray and EUV irradiances. The coefficients needed for the conversion can be calculated by comparing the observed soft X-ray light curve with that of the simulation. We apply our new method to three flares that occurred in the active region 12673 on September 06, 2017. The results show similarities to those of the Flare Irradiance Spectral Model, and reconstruct some of the EUV peaks observed by the EUV Variability Experiment onboard the Solar Dynamics Observatory.
△ Less
Submitted 12 May, 2020;
originally announced May 2020.
