-
Asgard/NOTT: First lab assembly and experimental results
Authors:
G. Garreau,
A. Bigioli,
R. Laugier,
B. La Torre,
M-A. Martinod,
K. Missiaen,
J. Morren,
G. Raskin,
M. Salman,
S. Gross,
M. Ireland,
A. P. Joó,
L. Labadie,
S. Madden,
A. Mazzoli,
G. Medgyesi,
A. Sanny,
A. Taras,
B. Vandenbussche,
D. Defrère
Abstract:
Asgard/NOTT is an ERC-funded project hosted at KU Leuven and is part of a new visitor instrumental suite, called Asgard, under preparation for the Very Large Telescope Interferometer (VLTI). Leveraging nulling capabilities and the long VLTI baselines, it is optimized for high-contrast imaging of the snow line region around young nearby main-sequence stars. This will enable the characterization of…
▽ More
Asgard/NOTT is an ERC-funded project hosted at KU Leuven and is part of a new visitor instrumental suite, called Asgard, under preparation for the Very Large Telescope Interferometer (VLTI). Leveraging nulling capabilities and the long VLTI baselines, it is optimized for high-contrast imaging of the snow line region around young nearby main-sequence stars. This will enable the characterization of the atmosphere of young giant exoplanets and warm/hot exozodiacal dust with spectroscopy in the L'-band (3.5-4.0$μ$m). In this work, we present the first lab assembly of the instrument done at KU Leuven and the technical solutions to tackle the challenge of performing nulling in the mid-infrared despite the thermal background. The opto-mechanical design of the warm optics and the injection system for the photonic chip are described. The alignment procedure used to assemble the system is also presented. Finally, the first experimental results, including fringes and null measurements, are given and confirm the adequacy of the bench to test and optimize the Asgard/NOTT instrument.
△ Less
Submitted 11 July, 2024;
originally announced July 2024.
-
L-band nulling interferometry at the VLTI with Asgard/NOTT: status and plans
Authors:
Denis Defrère,
Romain Laugier,
Marc-Antoine Martinod,
Germain Garreau,
Kwinten Missiaen,
Muhammad Salman,
Gert Raskin,
Colin Dandumont,
Steve Ertel,
Michael J. Ireland,
Stefan Kraus,
Lucas Labadie,
Alexandra Mazzoli,
Gyorgy Medgyesi,
Ahmed Sanny,
Olivier Absil,
Peter Ábráham,
Jean-Philippe Berger,
Myriam Bonduelle,
Azzurra Bigioli,
Emilie Bouzerand,
Josh Carter,
Nick Cvetojevic,
Benjamin Courtney-Barrer,
Adrian M. Glauser
, et al. (21 additional authors not shown)
Abstract:
NOTT (formerly Hi-5) is the L'-band (3.5-4.0~microns) nulling interferometer of Asgard, an instrument suite in preparation for the VLTI visitor focus. The primary scientific objectives of NOTT include characterizing (i) young planetary systems near the snow line, a critical region for giant planet formation, and (ii) nearby main-sequence stars close to the habitable zone, with a focus on detecting…
▽ More
NOTT (formerly Hi-5) is the L'-band (3.5-4.0~microns) nulling interferometer of Asgard, an instrument suite in preparation for the VLTI visitor focus. The primary scientific objectives of NOTT include characterizing (i) young planetary systems near the snow line, a critical region for giant planet formation, and (ii) nearby main-sequence stars close to the habitable zone, with a focus on detecting exozodiacal dust that could obscure Earth-like planets. In 2023-2024, the final warm optics have been procured and assembled in a new laboratory at KU Leuven. First fringes and null measurements were obtained using a Gallium Lanthanum Sulfide (GLS) photonic chip that was also tested at cryogenic temperatures. In this paper, we present an overall update of the NOTT project with a particular focus on the cold mechanical design, the first results in the laboratory with the final NOTT warm optics, and the ongoing Asgard integration activities. We also report on other ongoing activities such as the characterization of the photonic chip (GLS, LiNbO3, SiO), the development of the exoplanet science case, the design of the dispersion control module, and the progress with the self-calibration data reduction software.
△ Less
Submitted 11 July, 2024;
originally announced July 2024.
-
The BlackGEM telescope array I: Overview
Authors:
Paul J. Groot,
S. Bloemen,
P. Vreeswijk,
J. van Roestel,
P. G. Jonker,
G. Nelemans,
M. Klein-Wolt,
R. Le Poole,
D. Pieterse,
M. Rodenhuis,
W. Boland,
M. Haverkorn,
C. Aerts,
R. Bakker,
H. Balster,
M. Bekema,
E. Dijkstra,
P. Dolron,
E. Elswijk,
A. van Elteren,
A. Engels,
M. Fokker,
M. de Haan,
F. Hahn,
R. ter Horst
, et al. (53 additional authors not shown)
Abstract:
The main science aim of the BlackGEM array is to detect optical counterparts to gravitational wave mergers. Additionally, the array will perform a set of synoptic surveys to detect Local Universe transients and short time-scale variability in stars and binaries, as well as a six-filter all-sky survey down to ~22nd mag. The BlackGEM Phase-I array consists of three optical wide-field unit telescopes…
▽ More
The main science aim of the BlackGEM array is to detect optical counterparts to gravitational wave mergers. Additionally, the array will perform a set of synoptic surveys to detect Local Universe transients and short time-scale variability in stars and binaries, as well as a six-filter all-sky survey down to ~22nd mag. The BlackGEM Phase-I array consists of three optical wide-field unit telescopes. Each unit uses an f/5.5 modified Dall-Kirkham (Harmer-Wynne) design with a triplet corrector lens, and a 65cm primary mirror, coupled with a 110Mpix CCD detector, that provides an instantaneous field-of-view of 2.7~square degrees, sampled at 0.564\arcsec/pixel. The total field-of-view for the array is 8.2 square degrees. Each telescope is equipped with a six-slot filter wheel containing an optimised Sloan set (BG-u, BG-g, BG-r, BG-i, BG-z) and a wider-band 440-720 nm (BG-q) filter. Each unit telescope is independent from the others. Cloud-based data processing is done in real time, and includes a transient-detection routine as well as a full-source optimal-photometry module. BlackGEM has been installed at the ESO La Silla observatory as of October 2019. After a prolonged COVID-19 hiatus, science operations started on April 1, 2023 and will run for five years. Aside from its core scientific program, BlackGEM will give rise to a multitude of additional science cases in multi-colour time-domain astronomy, to the benefit of a variety of topics in astrophysics, such as infant supernovae, luminous red novae, asteroseismology of post-main-sequence objects, (ultracompact) binary stars, and the relation between gravitational wave counterparts and other classes of transients
△ Less
Submitted 22 November, 2024; v1 submitted 29 May, 2024;
originally announced May 2024.
-
Asgard/NOTT: L-band nulling interferometry at the VLTI. II. Warm optical design and injection system
Authors:
Germain Garreau,
Azzurra Bigioli,
Romain Laugier,
Gert Raskin,
Johan Morren,
Jean-Philippe Berger,
Colin Dandumont,
Harry-Dean Kenchington Goldsmith,
Simon Gross,
Michael Ireland,
Lucas Labadie,
Jérôme Loicq,
Stephen Madden,
Guillermo Martin,
Marc-Antoine Martinod,
Alexandra Mazzoli,
Ahmed Sanny,
Hancheng Shao,
Kunlun Yan,
Denis Defrère
Abstract:
Asgard/NOTT (previously Hi-5) is a European Research Council (ERC)-funded project hosted at KU Leuven and a new visitor instrument for the Very Large Telescope Interferometer (VLTI). Its primary goal is to image the snow line region around young stars using nulling interferometry in the L-band (3.5 to 4.0)$μ$m, where the contrast between exoplanets and their host stars is advantageous. The breakth…
▽ More
Asgard/NOTT (previously Hi-5) is a European Research Council (ERC)-funded project hosted at KU Leuven and a new visitor instrument for the Very Large Telescope Interferometer (VLTI). Its primary goal is to image the snow line region around young stars using nulling interferometry in the L-band (3.5 to 4.0)$μ$m, where the contrast between exoplanets and their host stars is advantageous. The breakthrough is the use of a photonic beam combiner, which only recently allowed the required theoretical raw contrast of $10^{-3}$ in this spectral range. Nulling interferometry observations of exoplanets also require a high degree of balancing between the four pupils of the VLTI in terms of intensity, phase, and polarization. The injection into the beam combiner and the requirements of nulling interferometry are driving the design of the warm optics and the injection system. The optical design up to the beam combiner is presented. It offers a technical solution to efficiently couple the light from the VLTI into the beam combiner. During the coupling, the objective is to limit throughput losses to 5% of the best expected efficiency for the injection. To achieve this, a list of different loss sources is considered with their respective impact on the injection efficiency. Solutions are also proposed to meet the requirements on beam balancing for intensity, phase, and polarization. The different properties of the design are listed, including the optics used, their alignment and tolerances, and their impact on the instrumental performances in terms of throughput and null depth. The performance evaluation gives an expected throughput loss of less than <6.4% of the best efficiency for the injection and a null depth of $\sim2.10^{-3}$, mainly from optical path delay errors outside the scope of this work.
△ Less
Submitted 14 February, 2024;
originally announced February 2024.
-
L-band nulling interferometry at the VLTI with Asgard/Hi-5: status and plans
Authors:
Denis Defrère,
Azzurra Bigioli,
Colin Dandumont,
Germain Garreau,
Romain Laugier,
Marc-Antoine Martinod,
Olivier Absil,
Jean-Philippe Berger,
Emilie Bouzerand,
Benjamin Courtney-Barrer,
Alexandre Emsenhuber,
Steve Ertel,
Jonathan Gagne,
Adrian M. Glauser,
Simon Gross,
Michael J. Ireland,
Harry-Dean Kenchington,
Jacques Kluska,
Stefan Kraus,
Lucas Labadie,
Viktor Laborde,
Alain Leger,
Jarron Leisenring,
Jérôme Loicq,
Guillermo Martin
, et al. (12 additional authors not shown)
Abstract:
Hi-5 is the L'-band (3.5-4.0 $μ$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outp…
▽ More
Hi-5 is the L'-band (3.5-4.0 $μ$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outputs and simultaneous photometric outputs for self-calibration purposes. In this paper, we present an update of the project with a particular focus on the overall architecture, opto-mechanical design of the warm and cold optics, injection system, and development of the photonic beam combiner. The key science projects are to survey (i) nearby young planetary systems near the snow line, where most giant planets are expected to be formed, and (ii) nearby main sequence stars near the habitable zone where exozodiacal dust that may hinder the detection of Earth-like planets. We present an update of the expected instrumental performance based on full end-to-end simulations using the new GRAVITY+ specifications of the VLTI and the latest planet formation models.
△ Less
Submitted 18 August, 2022;
originally announced August 2022.
-
MARVEL, a four-telescope array for high-precision radial-velocity monitoring
Authors:
Gert Raskin,
Christian Schwab,
Bart Vandenbussche,
Joris De Ridder,
Cyprien Lanthermann,
Jesus Pérez Padilla,
Andrew Tkachenko,
Hugues Sana,
Pierre Royer,
Saskia Prins,
Leen Decin,
Denis Defrère,
Jacob Pember,
David Atkinson,
Alistair Glasse,
Don Pollacco,
Giovanna Tinetti,
Manuel Güdel,
Julian Stürmer,
Ignasi Ribas,
Alexis Brandeker,
Lars Buchhave,
Samuel Halverson,
Gerardo Avila,
Johan Morren
, et al. (1 additional authors not shown)
Abstract:
Since the first discovery of a planet outside of our Solar System in 1995, exoplanet research has shifted from detecting to characterizing worlds around other stars. The TESS (NASA, launched 2019) and PLATO mission (ESA, planned launch 2026) will find and constrain the size of thousands of exoplanets around bright stars all over the sky. Radial velocity measurements are needed to characterize the…
▽ More
Since the first discovery of a planet outside of our Solar System in 1995, exoplanet research has shifted from detecting to characterizing worlds around other stars. The TESS (NASA, launched 2019) and PLATO mission (ESA, planned launch 2026) will find and constrain the size of thousands of exoplanets around bright stars all over the sky. Radial velocity measurements are needed to characterize the orbit and mass, and complete the picture of densities and composition of the exoplanet systems found. The Ariel mission (ESA, planned launch 2028) will characterize exoplanet atmospheres with infrared spectroscopy. Characterization of stellar activity using optical spectroscopy from the ground is key to retrieve the spectral footprint of the planetary atmosphere in Ariel's spectra. To enable the scientific harvest of the TESS, PLATO and Ariel space missions, we plan to install MARVEL as an extension of the existing Mercator Telescope at the Roque De Los Muchachos Observatory on La Palma (SPAIN). MARVEL consists of an array of four 80 cm telescopes linked through optical fibers to a single high-resolution echelle spectrograph, optimized for extreme-precision radial velocity measurements. It can observe the radial velocities of four different stars simultaneously or, alternatively, combine the flux from four telescopes pointing to a single faint target in one spectrum. MARVEL is constructed by a KU Leuven (Belgium) led collaboration, with contributions from the UK, Austria, Australia, Sweden, Denmark and Spain. In this paper, we present the MARVEL instrument with special focus on the optical design and expected performance of the spectrograph, and report on the status of the project.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
PLC-controlled cryostats for the BlackGEM and MeerLICHT detectors
Authors:
Gert Raskin,
Johan Morren,
Wim Pessemier,
Steven Bloemen,
Marc Klein-Wolt,
Ronald Roelfsema,
Paul Groot,
Conny Aerts
Abstract:
BlackGEM (BG) is an array of telescopes, currently under development at the Radboud University Nijmegen and at NOVA. It targets the detection of the optical counterparts of gravitational waves. The first 3 BG telescopes are planned to be installed in 2018 at the La Silla observatory. A single prototype telescope, named MeerLICHT, will already be commissioned early 2017 in Sutherland to provide an…
▽ More
BlackGEM (BG) is an array of telescopes, currently under development at the Radboud University Nijmegen and at NOVA. It targets the detection of the optical counterparts of gravitational waves. The first 3 BG telescopes are planned to be installed in 2018 at the La Silla observatory. A single prototype telescope, named MeerLICHT, will already be commissioned early 2017 in Sutherland to provide an optical complement for the MeerKAT radio array. The BG array consists of, initially, a set of 3 robotic 65-cm wide-field telescopes. Each telescope is equipped with a single STA1600 CCD detector with 10.5k x 10.5k 9-mum pixels that covers a 2.7 square degrees field of view. The cryostats for housing these detectors are developed and built at the KU Leuven University. The operational model of BG requires long periods of reliable ands-off operation. Therefore, we designed the cryostats for long vacuum hold time and we make use of a closed-cycle cooling system, based on Polycold PCC Joule-Thomson coolers. A single programmable logic controller (PLC) controls the cryogenic systems of several BG telescopes simultaneously, resulting in a highly reliable, cost-efficient and maintenance-friendly system. PLC-based cryostat control offers some distinct advantages, especially for a robotic facility. Apart of temperature monitoring and control, the PLC also monitors the vacuum quality, the power supply and the status of the PCC coolers (compressor power consumption and temperature, pressure in the gas lines, etc.). Furthermore, it provides an alarming system and safe and reproducible procedures for automatic cool down and warm up. The communication between PLC and higher-level software takes place via the OPC-UA protocol, offering a simple to implement, yet very powerful interface. Finally, a touch-panel display on the PLC provides the operator with a user-friendly and robust technical interface.
△ Less
Submitted 11 July, 2016;
originally announced July 2016.
-
Compact Stirling cooling of astronomical detectors
Authors:
Gert Raskin,
Johan Morren,
Wim Pessemier,
Jesus Perez Padilla,
Jeroen Vandersteen
Abstract:
MAIA, a three-channel imager targeting fast cadence photometry, was recently installed on the Mercator telescope (La Palma, Spain). This instrument observes a 9.4 x 14.1 arcmin field of view simultaneously in three color bands ($u$, $g$ and $r$), using three of the largest (un-) available frame-transfer CCDs, namely the 2k x 6k CCD42-C0 from e2v. As these detectors are housed in three separate cry…
▽ More
MAIA, a three-channel imager targeting fast cadence photometry, was recently installed on the Mercator telescope (La Palma, Spain). This instrument observes a 9.4 x 14.1 arcmin field of view simultaneously in three color bands ($u$, $g$ and $r$), using three of the largest (un-) available frame-transfer CCDs, namely the 2k x 6k CCD42-C0 from e2v. As these detectors are housed in three separate cryostats, compact cooling devices are required that offer sufficient power to cool the large chips to a temperature of 165K. We explored a broad spectrum of cooling options and technologies to cool the MAIA detectors. Finally, compact free-piston Stirling coolers were selected, namely the CryoTel MT cryo-coolers from SUNPOWER, that can extract 5W of heat at a temperature of 77K. In this contribution we give details of the MAIA detector cooling solution. We also discuss the general usability of this type of closed-cycle cryo-coolers for astronomical detectors. They offer distinct advantages but the vibrations caused by mechanical cryo-cooling impose a serious drawback. We present a solution to mechanically decouple the coolers from the instrument and show some results of how this reduces the vibrations to a level that is acceptable for most applications on astronomical telescopes.
△ Less
Submitted 4 November, 2013;
originally announced November 2013.
-
MAIA, a three-channel imager for asteroseismology: instrument design
Authors:
Gert Raskin,
Steven Bloemen,
Johan Morren,
Jesus Perez Padilla,
Saskia Prins,
Wim Pessemier,
Jeroen Vandersteen,
Florian Merges,
Roy Østensen,
Hans Van Winckel,
Conny Aerts
Abstract:
MAIA, an acronym for Mercator Advanced Imager for Asteroseismology, is a three-channel instrument that targets fast-cadence three-colour photometry, installed at the 1.2-m Mercator telescope at the Roque de los Muchachos at La Palma (Canary Islands, Spain). This instrument observes a 9.4x14.1arcmin2 Field-of-View simultaneously in three wavelength bands on three large frame-transfer CCDs. These de…
▽ More
MAIA, an acronym for Mercator Advanced Imager for Asteroseismology, is a three-channel instrument that targets fast-cadence three-colour photometry, installed at the 1.2-m Mercator telescope at the Roque de los Muchachos at La Palma (Canary Islands, Spain). This instrument observes a 9.4x14.1arcmin2 Field-of-View simultaneously in three wavelength bands on three large frame-transfer CCDs. These detectors were developed for ESA's cancelled Eddington space mission and were offered on permanent loan to the Institute of Astronomy (KU Leuven, Belgium). MAIA uses its own ugr photometric system that is a crude approximation of the SDSS system. The instrument is designed to perform multi-colour observations for asteroseismology, with specific emphasis on subdwarf and white dwarf single and binary stars. We describe the design of the instrument, discuss key components, and report on its performance and first results.
△ Less
Submitted 8 October, 2013;
originally announced October 2013.
-
HERMES: a high-resolution fibre-fed spectrograph for the Mercator telescope
Authors:
Gert Raskin,
Hans Van Winckel,
Herman Hensberge,
Alain Jorissen,
Holger Lehmann,
Christoffel Waelkens,
Gerardo Avila,
Jean-Pierre De Cuyper,
Pieter Degroote,
Rene Dubosson,
Louis Dumortier,
Yves Fremat,
Uwe Laux,
Bernard Michaud,
Johan Morren,
Jesus Perez Padilla,
Wim Pessemier,
Saskia Prins,
Kristof Smolders,
Sophie Van Eck,
Johannes Winkler
Abstract:
The HERMES high-resolution spectrograph project aims at exploiting the specific potential of small but flexible telescopes in observational astrophysics. The optimised optical design of the spectrograph is based on the well-proven concept of white-pupil beam folding for high-resolution spectroscopy. In this contribution we present the complete project, including the spectrograph design and procure…
▽ More
The HERMES high-resolution spectrograph project aims at exploiting the specific potential of small but flexible telescopes in observational astrophysics. The optimised optical design of the spectrograph is based on the well-proven concept of white-pupil beam folding for high-resolution spectroscopy. In this contribution we present the complete project, including the spectrograph design and procurement details, the telescope adaptor and calibration unit, the detector system, as well as the optimised data-reduction pipeline. We present a detailed performance analysis to show that the spectrograph performs as specified both in optical quality and in total efficiency. With a spectral resolution of 85000 (63000 for the low-resolution fibre), a spectral coverage from 377 to 900nm in a single exposure and a peak efficiency of 28%, HERMES proves to be an ideal instrument for building up time series of high-quality data of variable (stellar) phenomena.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
