-
TuMag: the tunable magnetograph for the Sunrise III mission
Authors:
J. C. del Toro Iniesta,
D. Orozco Suárez,
A. Álvarez-Herrero,
E. Sanchis Kilders,
I. Pérez-Grande,
B. Ruiz Cobo,
L. R. Bellot Rubio,
M. Balaguer Jiménez,
A. C. López Jiménez,
D. Álvarez García,
J. L. Ramos Más,
J. P. Cobos Carrascosa,
P. Labrousse,
A. J. Moreno Mantas,
J. M. Morales-Fernández,
B. Aparicio del Moral,
A. Sánchez Gómez,
E. Bailón Martínez,
F. J. Bailén,
H. Strecker,
A. L. Siu-Tapia,
P. Santamarina Guerrero,
A. Moreno Vacas,
J. Atiénzar García,
A. J. Dorantes Monteagudo
, et al. (39 additional authors not shown)
Abstract:
One of the instruments aboard the Sunrise III mission, the Tunable Magnetograph (TuMag), is a tunable imaging spectropolarimeter in visible wavelengths. It is designed to probe the vector magnetic field and the line-of-sight velocity of the photosphere and the lower chromosphere. The quasi-simultaneous observation of two spectral lines provides excellent diagnostic measurements of the magnetic and…
▽ More
One of the instruments aboard the Sunrise III mission, the Tunable Magnetograph (TuMag), is a tunable imaging spectropolarimeter in visible wavelengths. It is designed to probe the vector magnetic field and the line-of-sight velocity of the photosphere and the lower chromosphere. The quasi-simultaneous observation of two spectral lines provides excellent diagnostic measurements of the magnetic and dynamic coupling in these layers.
The key technologies employed for TuMag are an LCVR-based polarimeter and a solid, LiNbO3 Fabry-Pérot etalon as a spectrometer. However, it also incorporates several innovative features, such as home-made high-sensitivity scientific cameras and a double filter wheel. TuMag can sequentially observe any two out of the three spectral lines of Fe I at 525.02 and 525.06 nm and of Mg I at 517.3 nm.
Laboratory measurements have demonstrated outstanding performance, including a wavefront root-mean-square error better than λ/13 for image quality, a full-width-at-half-maximum of 8.7 pm for the filtergraph transmission profile, and polarimetric efficiencies > 0.54. Here we report on the concept, design, calibration, and integration phases of the instrument, as well as on the data reduction pipeline.
△ Less
Submitted 12 February, 2025;
originally announced February 2025.
-
Sunrise III: Overview of Observatory and Instruments
Authors:
Andreas Korpi-Lagg,
Achim Gandorfer,
Sami K. Solanki,
Jose Carlos del Toro Iniesta,
Yukio Katsukawa,
Pietro Bernasconi,
Thomas Berkefeld,
Alex Feller,
Tino L. Riethmüller,
Alberto Álvarez-Herrero,
Masahito Kubo,
Valentín Martínez Pillet,
H. N. Smitha,
David Orozco Suárez,
Bianca Grauf,
Michael Carpenter,
Alexander Bell,
María-Teresa Álvarez-Alonso,
Daniel Álvarez García,
Beatriz Aparicio del Moral,
Daniel Ayoub,
Francisco Javier Bailén,
Eduardo Bailón Martínez,
Maria Balaguer Jiménez,
Peter Barthol
, et al. (95 additional authors not shown)
Abstract:
In July 2024, Sunrise completed its third successful science flight. The Sunrise III observatory had been upgraded significantly after the two previous successful flights in 2009 and 2013. Three completely new instruments focus on the small-scale physical processes and their complex interaction from the deepest observable layers in the photosphere up to chromospheric heights. Previously poorly exp…
▽ More
In July 2024, Sunrise completed its third successful science flight. The Sunrise III observatory had been upgraded significantly after the two previous successful flights in 2009 and 2013. Three completely new instruments focus on the small-scale physical processes and their complex interaction from the deepest observable layers in the photosphere up to chromospheric heights. Previously poorly explored spectral regions and lines are exploited to paint a three-dimensional picture of the solar atmosphere with unprecedented completeness and level of detail. The full polarimetric information is captured by all three instruments to reveal the interaction between the magnetic fields and the hydrodynamic processes. Two slit-based spectropolarimeters, the Sunrise UV Spectropolarimeter and Imager (SUSI) and the Sunrise Chromospheric Infrared spectro-Polarimeter (SCIP), focus on the near-ultraviolet and the near-infrared regions respectively, and the imaging spectropolarimeter Tunable Magnetograph (TuMag) simultaneously obtains maps of the full field-of-view of $46 \times 46$ Mm$^2$ in the photosphere and the chromosphere in the visible. The instruments are operated in an orchestrated mode, benefiting from a new Image Stabilization and Light Distribution unit (ISLiD), with the Correlating Wavefront Sensor (CWS) providing the autofocus control and an image stability with a root-mean-square value smaller than 0.005''. A new gondola was constructed to significantly improve the telescope pointing stability, required to achieve uninterrupted observations over many hours. Sunrise III was launched successfully on July 10, 2024, from the Esrange Space Center near Kiruna (Sweden). It reached the landing site between the Mackenzie River and the Great Bear Lake in Canada after a flight duration of 6.5 days. In this paper, we give an overview of the Sunrise III observatory and its instruments.
△ Less
Submitted 30 May, 2025; v1 submitted 10 February, 2025;
originally announced February 2025.
-
The PLATO Mission
Authors:
Heike Rauer,
Conny Aerts,
Juan Cabrera,
Magali Deleuil,
Anders Erikson,
Laurent Gizon,
Mariejo Goupil,
Ana Heras,
Jose Lorenzo-Alvarez,
Filippo Marliani,
César Martin-Garcia,
J. Miguel Mas-Hesse,
Laurence O'Rourke,
Hugh Osborn,
Isabella Pagano,
Giampaolo Piotto,
Don Pollacco,
Roberto Ragazzoni,
Gavin Ramsay,
Stéphane Udry,
Thierry Appourchaux,
Willy Benz,
Alexis Brandeker,
Manuel Güdel,
Eduardo Janot-Pacheco
, et al. (820 additional authors not shown)
Abstract:
PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observati…
▽ More
PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5 %, 10 %, 10 % for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution.
The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO's target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile at the beginning of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases.
△ Less
Submitted 18 November, 2024; v1 submitted 8 June, 2024;
originally announced June 2024.
-
High-speed data processing onboard sunrise chromospheric infrared spectropolarimeter for the SUNRISE III balloon telescope
Authors:
Masahito Kubo,
Yukio Katsukawa,
David Hernández Expósito,
Antonio Sánchez Gómez,
María Balaguer Jimenéz,
David Orozco Suárez,
José M. Morales Fernández,
Beatriz Aparicio del Moral,
Antonio J. Moreno Mantas,
Eduardo Bailón Martínez,
Jose Carlos del Toro Iniesta,
Yusuke Kawabata,
Carlos Quintero Noda,
Takayoshi Oba,
Ryohtaroh T. Ishikawa,
Toshifumi Shimizu
Abstract:
The Sunrise Chromospheric Infrared spectroPolarimeter (SCIP) has been developed for the third flight of the SUNRISE balloon-borne stratospheric solar observatory. The aim of SCIP is to reveal the evolution of three-dimensional magnetic fields in the solar photosphere and chromosphere using spectropolarimetric measurements with a polarimetric precision of 0.03\% (1$σ$). Multiple lines in the 770 an…
▽ More
The Sunrise Chromospheric Infrared spectroPolarimeter (SCIP) has been developed for the third flight of the SUNRISE balloon-borne stratospheric solar observatory. The aim of SCIP is to reveal the evolution of three-dimensional magnetic fields in the solar photosphere and chromosphere using spectropolarimetric measurements with a polarimetric precision of 0.03\% (1$σ$). Multiple lines in the 770 and 850 nm wavelength bands are simultaneously observed with two 2k$\times$2k CMOS cameras at a frame rate of 31.25 Hz. Stokes profiles are calculated onboard by accumulating the images modulated by a polarization modulation unit, and then compression processes are applied to the two-dimensional maps of the Stokes profiles. This onboard data processing effectively reduces the data rate. SCIP electronics can handle large data formats at high speed. Before the implementation into the flight SCIP electronics, a performance verification of the onboard data processing was performed with synthetic SCIP data that were produced with a numerical simulation modeling the solar atmospheres. Finally, we verified that the high-speed onboard data processing was realized on ground with the flight hardware by using images illuminated by natural sunlight or an LED.
△ Less
Submitted 31 July, 2023;
originally announced July 2023.
-
Raman spectroscopy and planetary exploration: testing the ExoMars/RLS system at the Tabernas Desert (Spain)
Authors:
Marco Veneranda,
Guillermo Lopez-Reyes,
Jose Antonio Manrique-Martinez,
Aurelio Sanz-Arranz,
Jesús Medina,
Carlos Pérez,
César Quintana,
Andoni Moral,
Jose A. Rodríguez,
Jesús Zafra,
Fernando Rull1
Abstract:
ExoFit trials are field campaigns financed by ESA to test the Rosalind Franklin rover and to enhance collaboration practices between ExoMars working groups. During the first trial, a replicate of the ExoMars rover was remotely operated from Oxfordshire (United Kingdom) to perform a complex sequence of scientific operation at the Tabernas Desert (Spain). By following the ExoMars Reference Surface M…
▽ More
ExoFit trials are field campaigns financed by ESA to test the Rosalind Franklin rover and to enhance collaboration practices between ExoMars working groups. During the first trial, a replicate of the ExoMars rover was remotely operated from Oxfordshire (United Kingdom) to perform a complex sequence of scientific operation at the Tabernas Desert (Spain). By following the ExoMars Reference Surface Mission (RSM), the rover investigated the Badlands subsoil and collected drill cores, whose analytical study was entrusted to the RLS (Raman Laser Spectrometer) team. The preliminary characterization of core samples was performed in-situ through the RLS Engineering and Qualification Model (EQM-2) and the Raman Demonstrator (RAD1), being this a new, portable emulator of the RLS. In-situ results where then complemented by laboratory analysis using the RLS ExoMars simulator and the commercial version of the Curiosity/CheMin XRD system. Raman data, obtained by closely simulating the operational constraints of the mission, successfully disclosed the mineralogical composition of the samples, reaching the detection of minor/trace phases that were not detected by XRD. More importantly, Raman analysis detected many organic functional groups, proving the presence of extremophile organisms in the arid sub-surface of the Tabernas Desert. In light of the forthcoming ExoMars mission, the results here presented proves that RLS could play a critical role in the characterization of Martian sub-surface environments and in the analytical detection of potential traces of live tracers.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
ExoMars Raman Laser Spectrometer RLS, a tool to semi-quantify the serpentinization degree of olivine-rich rocks on Mars
Authors:
Marco Veneranda,
Guillermo Lopez-Reyes,
Elena Pascual Sanchez,
Agata M. Krzesinska,
Jose Antonio Manrique-Martinez,
Aurelio Sanz-Arranz,
Cateline Lantz,
Emmanuel Lalla,
Andoni Moral,
Jesus Medina,
Francois Poulet,
Henning Dypvik,
Stephanie C. Werner,
Jorge L. Vago,
Fernando Rull
Abstract:
We evaluate what will be the effectiveness of the ExoMars Raman Laser Spectrometer (RLS) to determine the degree of serpentinization of olivine-rich units on Mars. We selected terrestrial analogues of martian ultramafic rocks from the Leka Ophiolite Complex (LOC) and analyzed them with both laboratory and flight-like analytical instruments. We first studied the mineralogical composition of the sam…
▽ More
We evaluate what will be the effectiveness of the ExoMars Raman Laser Spectrometer (RLS) to determine the degree of serpentinization of olivine-rich units on Mars. We selected terrestrial analogues of martian ultramafic rocks from the Leka Ophiolite Complex (LOC) and analyzed them with both laboratory and flight-like analytical instruments. We first studied the mineralogical composition of the samples (mostly olivine and serpentine) with state-of-the-art diffractometric and spectroscopic laboratory systems. We compared these results with those obtained using our RLS ExoMars Simulator. Our work shows that the RLS ExoMars Simulator successfully identified all major phases. Moreover, when emulating the automatic operating mode of the flight instrument, the RLS ExoMars simulator also detected several minor compounds, some of which were not observed by NIR and XRD. Thereafter, we produced RLS dedicated calibration curves (R2 between 0.9993 and 0.9995 with an uncertainty between 3.0% and 5.2% with a confidence interval of 95%) to estimate the relative content of olivine and serpentine in the samples. Our results show that RLS can be very effective to identify serpentine, a scientific target of primary importance for the potential detection of biosignatures on Mars the main objective of the ExoMars rover mission.
△ Less
Submitted 21 January, 2021;
originally announced January 2021.
