-
A chemically etched D-band waveguide orthomode transducer for CMB measurements
Authors:
E. Manzan,
A. Mennella,
F. Cavaliere,
C. Franceschet,
S. Mandelli,
F. Montonati,
M. Zannoni,
P. de Bernardis,
M. Bersanelli,
E. Boria,
N. Brancadori,
A. Coppolecchia,
M. Gervasi,
L. Lamagna,
A. Limonta,
S. Masi,
A. Paiella,
A. Passerini,
F. Pezzotta,
G. Pettinari,
F. Piacentini,
E. Tommasi,
D. Viganò,
A. Volpe
Abstract:
This study presents a prototype D-band waveguide orthomode transducer (OMT) fabricated using chemically etched brass platelets. This method offers a fast, cost-effective, and scalable approach for producing waveguide OMTs above 100 GHz, making it well-suited for current and future Cosmic Microwave Background polarization experiments, where large focal planes with thousands of receivers are require…
▽ More
This study presents a prototype D-band waveguide orthomode transducer (OMT) fabricated using chemically etched brass platelets. This method offers a fast, cost-effective, and scalable approach for producing waveguide OMTs above 100 GHz, making it well-suited for current and future Cosmic Microwave Background polarization experiments, where large focal planes with thousands of receivers are required to detect the faint primordial \textit{B}-modes. Chemical etching has already demonstrated its effectiveness in manufacturing corrugated feedhorn arrays with state-of-the-art performance up to 150 GHz. Here, we evaluate its applicability to more complex structures, such as OMTs.
We designed a single OMT prototype operating in the 130-170 GHz range, fabricated by chemically etching 0.15 mm-thick brass plates, which were then stacked, aligned, and mechanically clamped. Simulations based on metrological measurements of the OMT profile predict return losses below $-$10 dB, isolation better than $-$30 dB, and transmission around $-$0.5 dB.
The measured transmission and isolation, however, is around $-$1.5/$-$2 dB and $<-$20 dB, respectively. Further simulations show that the degradation in the transmission is related to defects and roughness along the etched profile ($\mathrm{RMS}\simeq$3 $μ$m), which is a typical and unavoidable effect of chemical etching. The discrepancy in isolation, instead, could arise from a slight rotation ($\sim$3$^{\circ}$) of the polarization angle within the measurement chain.
Our results show that chemical etching is a fast, low-cost, and scalable technique for producing waveguide OMTs with state-of-the-art performance in terms of return loss and isolation. However, at frequencies above 100 GHz the transmission coefficient may degrade due to the mechanical precision limitations of chemical etching.
△ Less
Submitted 6 May, 2025;
originally announced May 2025.
-
The European Low Frequency Survey on the Simons Array
Authors:
Aniello Mennella,
Kam Arnold,
Susanna Azzoni,
Carlo Baccigalupi,
A. J. Banday,
Rita Belén Barreiro,
Darcy Barron,
Marco Bersanelli,
Francisco J. Casas,
Sean Casey,
Elena de la Hoz,
Cristian Franceschet,
Michael E. Jones,
Ricardo T. Genóva-Santos,
R. Hoyland,
Adrian T. Lee,
Enrique Martinez-Gonzalez,
Filippo Montonati,
José-Alberto Rubiño-Martín,
Angela Taylor,
Patricio Vielva
Abstract:
In this paper we present the European Low Frequency Survey (ELFS), a project that will enable foregrounds-free measurements of the primordial $B$-mode polarization and a detection of the tensor-to-scalar ratio, $r$, to a level $σ(r) = 0.001$ by measuring the Galactic and extra-galactic emissions in the 5--120\,GHz frequency window. Indeed, the main difficulty in measuring the B-mode polarization c…
▽ More
In this paper we present the European Low Frequency Survey (ELFS), a project that will enable foregrounds-free measurements of the primordial $B$-mode polarization and a detection of the tensor-to-scalar ratio, $r$, to a level $σ(r) = 0.001$ by measuring the Galactic and extra-galactic emissions in the 5--120\,GHz frequency window. Indeed, the main difficulty in measuring the B-mode polarization comes from the fact that many other processes in the Universe also emit polarized microwaves, which obscure the faint Cosmic Microwave Background (CMB) signal. The first stage of this project is being carried out in synergy with the Simons Array (SA) collaboration, installing a 5.5--11\,GHz (X-band) coherent receiver at the focus of one of the three 3.5\,m SA telescopes in Atacama, Chile, followed by the installation of the QUIJOTE-MFI2 in the 10--20 GHz range. We designate this initial iteration of the ELFS program as ELFS-SA. The receivers are equipped with a fully digital back-end that will provide a frequency resolution of 1\,MHz across the band, allowing us to clean the scientific signal from unwanted radio frequency interference, particularly from low-Earth orbit satellite mega constellations. This paper reviews the scientific motivation for ELFS and its instrumental characteristics, and provides an update on the development of ELFS-SA.
△ Less
Submitted 25 June, 2024; v1 submitted 14 June, 2024;
originally announced June 2024.
-
Measuring the CMB spectral distortions with COSMO: the multi-mode antenna system
Authors:
E. Manzan,
L. Albano,
C. Franceschet,
E. S. Battistelli,
P. de Bernardis,
M. Bersanelli,
F. Cacciotti,
A. Capponi,
F. Columbro,
G. Conenna,
G. Coppi,
A. Coppolecchia,
G. D'Alessandro,
G. De Gasperis,
M. De Petris,
M. Gervasi,
G. Isopi,
L. Lamagna,
A. Limonta,
E. Marchitelli,
S. Masi,
A. Mennella,
F. Montonati,
F. Nati,
A. Occhiuzzi
, et al. (7 additional authors not shown)
Abstract:
In this work, we present the design and manufacturing of the two multi-mode antenna arrays of the COSMO experiment and the preliminary beam pattern measurements of their fundamental mode compared with simulations.
COSMO is a cryogenic Martin-Puplett Fourier Transform Spectrometer that aims at measuring the isotropic y-type spectral distortion of the Cosmic Microwave Background from Antarctica, b…
▽ More
In this work, we present the design and manufacturing of the two multi-mode antenna arrays of the COSMO experiment and the preliminary beam pattern measurements of their fundamental mode compared with simulations.
COSMO is a cryogenic Martin-Puplett Fourier Transform Spectrometer that aims at measuring the isotropic y-type spectral distortion of the Cosmic Microwave Background from Antarctica, by performing differential measurements between the sky and an internal, cryogenic reference blackbody. To reduce the atmospheric contribution, a spinning wedge mirror performs fast sky-dips at varying elevations while fast, low-noise Kinetic Inductance detectors scan the interferogram.
Two arrays of antennas couple the radiation to the detectors. Each array consists of nine smooth-walled multi-mode feed-horns, operating in the $120-180$ GHz and $210-300$ GHz range, respectively. The multi-mode propagation helps increase the instrumental sensitivity without employing large focal planes with hundreds of detectors. The two arrays have a step-linear and a linear profile, respectively, and are obtained by superimposing aluminum plates made with CNC milling. The simulated multi-mode beam pattern has a $\sim 20^{\circ} - 26^{\circ}$ FWHM for the low-frequency array and $\sim 16^{\circ}$ FWHM for the high-frequency one. The side lobes are below $-15$ dB.
To characterize the antenna response, we measured the beam pattern of the fundamental mode using a Vector Network Analyzer, in far-field conditions inside an anechoic chamber at room temperature. We completed the measurements of the low-frequency array and found a good agreement with the simulations. We also identified a few non-idealities that we attribute to the measuring setup and will further investigate. A comprehensive multi-mode measurement will be feasible at cryogenic temperature once the full receiver is integrated.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
The European Low Frequency Survey
Authors:
Aniello Mennella,
Kam Arnold,
Susanna Azzoni,
Carlo Baccigalupi,
Anthony Banday,
R. Belen Barreiro,
Darcy Barron,
Marco Bersanelli,
Sean Casey,
Loris Colombo,
Elena de la Hoz,
Cristian Franceschet,
Michael E. Jones,
Ricardo T. Genova-Santos,
Roger J. Hoyland,
Adrian T. Lee,
Enrique Martinez-Gonzalez,
Filippo Montonati,
Jose-Alberto Rubino-Martin,
Angela Taylor,
Patricio Vielva
Abstract:
In this paper we present the European Low Frequency Survey (ELFS), a project that will enable foregrounds-free measurements of primordial $B$-mode polarization to a level 10$^{-3}$ by measuring the Galactic and extra-Galactic emissions in the 5--120\,GHz frequency window. Indeed, the main difficulty in measuring the B-mode polarization comes not just from its sheer faintness, but from the fact tha…
▽ More
In this paper we present the European Low Frequency Survey (ELFS), a project that will enable foregrounds-free measurements of primordial $B$-mode polarization to a level 10$^{-3}$ by measuring the Galactic and extra-Galactic emissions in the 5--120\,GHz frequency window. Indeed, the main difficulty in measuring the B-mode polarization comes not just from its sheer faintness, but from the fact that many other objects in the Universe also emit polarized microwaves, which mask the faint CMB signal. The first stage of this project will be carried out in synergy with the Simons Array (SA) collaboration, installing a 5.5--11 GHz coherent receiver at the focus of one of the three 3.5\,m SA telescopes in Atacama, Chile ("ELFS on SA"). The receiver will be equipped with a fully digital back-end based on the latest Xilinx RF System-on-Chip devices that will provide frequency resolution of 1\,MHz across the whole observing band, allowing us to clean the scientific signal from unwanted radio frequency interference, particularly from low-Earth orbit satellite mega-constellations. This paper reviews the scientific motivation for ELFS and its instrumental characteristics, and provides an update on the development of ELFS on SA.
△ Less
Submitted 22 November, 2023; v1 submitted 25 October, 2023;
originally announced October 2023.
