Fiber modal noise mitigation by a rotating double scrambler
Authors:
Gert Raskin,
Dmytro Rogozin,
Tom Mladenov,
Christian Schwab,
David Coutts
Abstract:
Fiber modal noise is a performance limiting factor in high-precision radial velocity measurements with multi-mode fiber-fed high-resolution spectrographs. Traditionally, modal noise is mitigated by agitating the fiber, this way redistributing the light that propagates in the fiber over many different modes. However, in case of fibers with only a limited number of modes, e.g. at near-infrared wavel…
▽ More
Fiber modal noise is a performance limiting factor in high-precision radial velocity measurements with multi-mode fiber-fed high-resolution spectrographs. Traditionally, modal noise is mitigated by agitating the fiber, this way redistributing the light that propagates in the fiber over many different modes. However, in case of fibers with only a limited number of modes, e.g. at near-infrared wavelengths or in adaptive-optics assisted systems, this method becomes very inefficient. The strong agitation that would be needed stresses the fiber and can lead to focal ratio degradation. As an alternative approach, we propose to use a classic optical double scrambler and to rotate the scrambler's first fiber end during each exposure. Because of the rotating illumination pattern of the scrambler's second fiber, the modes that are excited vary continuously. This leads to very efficient averaging of the modal pattern at the fiber exit and to a strong reduction of modal noise. In this contribution, we present a prototype design and first laboratory results of the rotating double scrambler.
△ Less
Submitted 16 November, 2019;
originally announced November 2019.
CUBESPEC: Low-cost space-based astronomical spectroscopy
Authors:
Gert Raskin,
Tjorven Delabie,
Wim De Munter,
Hugues Sana,
Bart Vandenbussche,
Bram Vandoren,
Victoria Antoci,
Hans Kjeldsen,
Christoffer Karoff,
Alex de Koter,
Jean-Michel Désert,
Tom Mladenov,
Dirk Vandepitte
Abstract:
CubeSats are routinely used for low-cost photometry from space. Space-borne spectroscopy, however, is still the exclusive domain of much larger platforms. Key astrophysical questions in e.g. stellar physics and exoplanet research require uninterrupted spectral monitoring from space over weeks or months. Such monitoring of individual sources is unfortunately not affordable with these large platform…
▽ More
CubeSats are routinely used for low-cost photometry from space. Space-borne spectroscopy, however, is still the exclusive domain of much larger platforms. Key astrophysical questions in e.g. stellar physics and exoplanet research require uninterrupted spectral monitoring from space over weeks or months. Such monitoring of individual sources is unfortunately not affordable with these large platforms. With CUBESPEC we plan to offer the astronomical community a low-cost CubeSat solution for near-UV/optical/near-IR spectroscopy that enables this type of observations. CUBESPEC is a generic spectrograph that can be configured with minimal hardware changes to deliver both low resolution (R=100) with very large spectral coverage (200-1000nm), as well as high resolution (R=30,000) over a selected wavelength range. It is built around an off-axis Cassegrain telescope and a slit spectrograph with configurable dispersion elements. CUBESPEC will use a compact attitude determination and control system for coarse pointing of the entire spacecraft, supplemented with a fine-guidance system using a fast steering mirror to center the source on the spectrograph slit and to cancel out satellite jitter. An extremely compact optical design allows us to house this instrument in a 6U CubeSat with a volume of only 10x20x30cm$^{3}$, while preserving a maximized entrance pupil of ca. 9x19cm$^{2}$. In this contribution, we give an overview of the CUBESPEC project, discuss its most relevant science cases, and present the design of the instrument.
△ Less
Submitted 28 June, 2018; v1 submitted 30 May, 2018;
originally announced May 2018.
