-
Cascade adaptive optics with a second stage based on a Zernike wavefront sensor for exoplanet observations
Authors:
M. N'Diaye,
A. Vigan,
B. Engler,
M. Kasper,
K. Dohlen,
S. Leveratto,
J. Floriot,
M. Marcos,
C. Bailet,
P. Bristow
Abstract:
Over the past decade, the high-contrast observation of disks and gas giant planets around nearby stars has been made possible on ground-based instruments using extreme adaptive optics (XAO). While these facilities produce images with a Strehl ratio larger than 90% in H-band in median observing conditions and high-flux regime, the correction leaves AO residuals which impede the study of fainter or…
▽ More
Over the past decade, the high-contrast observation of disks and gas giant planets around nearby stars has been made possible on ground-based instruments using extreme adaptive optics (XAO). While these facilities produce images with a Strehl ratio larger than 90% in H-band in median observing conditions and high-flux regime, the correction leaves AO residuals which impede the study of fainter or less massive exoplanets. Cascade AO systems with a fast second stage based on a Pyramid wavefront sensor have recently emerged as an appealing solution to reduce the atmospheric wavefront errors. Since these aberrations are expected to be small, they can also be accurately measured by a Zernike wavefront sensor (ZWFS), a well-known concept for its high sensitivity and moderate linear capture range. We propose an alternative second stage that relies on the ZWFS to correct for the AO residuals. We implemented the cascade AO with a ZWFS-based control loop on the ESO's GHOST testbed to validate the scheme in monochromatic light. In median wind speed and seeing, our second-stage AO with a ZWFS and a basic integrator reduce the atmospheric residuals by a factor of 6 and increase the wavefront error stability with a gain of 2 from open to closed loop. In the presence of non common path aberrations, we also reach a contrast gain by a factor of 2 in the images with a Lyot coronagraph at short separations from the source, proving the ability of our scheme to work in cascade with an XAO loop. In addition, it may prove useful for imaging fainter or lighter close-in companions. In more challenging conditions, contrast improvements are also achieved by adjusting the control loop features. Our study validates the ZWFS-based second-stage AO loop as an effective solution to address small residuals left from a single-stage XAO system for the coronagraphic observations of circumstellar environments.
△ Less
Submitted 22 November, 2024; v1 submitted 18 November, 2024;
originally announced November 2024.
-
Exoplanet imaging with ELTs: exploring a second-stage AO with a Zernike wavefront sensor on the ESO/GHOST testbed
Authors:
Mamadou N'Diaye,
Arthur Vigan,
Byron Engler,
Markus Kasper,
Serban Leveratto,
Johan Floriot,
Michel Marcos,
Christophe Bailet,
Kjetil Dohlen
Abstract:
We propose to explore a cascade extreme Adaptive optics (ExAO) approach with a second stage based on a Zernike wavefront sensor (ZWFS) for exoplanet imaging and spectroscopy. Most exoplanet imagers currently use a single-stage ExAO to correct for the effects of atmospheric turbulence and produce high-Strehl images of observed stars in the near-infrared. While such systems enable the observation of…
▽ More
We propose to explore a cascade extreme Adaptive optics (ExAO) approach with a second stage based on a Zernike wavefront sensor (ZWFS) for exoplanet imaging and spectroscopy. Most exoplanet imagers currently use a single-stage ExAO to correct for the effects of atmospheric turbulence and produce high-Strehl images of observed stars in the near-infrared. While such systems enable the observation of warm gaseous companions around nearby stars, adding a second-stage AO enables to push the wavefront correction further and possibly observe colder or smaller planets. This approach is currently investigated in different exoplanet imagers (VLT/SPHERE, Mag-AOX, Subaru/SCExAO) by considering a Pyramid wavefront sensor (PWFS) in the second arm to measure the residual atmospheric turbulence left from the first stage. Since these aberrations are expected to be very small (a few tens of nm in the near-infrared domain), we propose to investigate an alternative approach based on the ZWFS. This sensor is a promising concept with a small capture range to estimate residual wavefront errors thanks to its large sensitivity, simple phase reconstruction and easiness of implementation. In this contribution, we perform preliminary tests on the GHOST testbed at ESO to validate this approach experimentally. Additional experiments with petalling effects are also showed, giving promising wavefront correction results. Finally, we briefly discuss a first comparison between PWFS-based and ZWFS-based second-stage AO to draw preliminary conclusions on the interests of both schemes for exoplanet imaging and spectroscopy with the upgrade of the current exoplanet imagers and the envisioned ExAO instruments for ELTs.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Gaia Early Data Release 3: Structure and properties of the Magellanic Clouds
Authors:
Gaia Collaboration,
X. Luri,
L. Chemin,
G. Clementini,
H. E. Delgado,
P. J. McMillan,
M. Romero-Gómez,
E. Balbinot,
A. Castro-Ginard,
R. Mor,
V. Ripepi,
L. M. Sarro,
M. -R. L. Cioni,
C. Fabricius,
A. Garofalo,
A. Helmi,
T. Muraveva,
A. G. A. Brown,
A. Vallenari,
T. Prusti,
J. H. J. de,
C. Babusiaux,
M. Biermann,
O. L. Creevey,
D. W. Evans
, et al. (395 additional authors not shown)
Abstract:
We compare the Gaia DR2 and Gaia EDR3 performances in the study of the Magellanic Clouds and show the clear improvements in precision and accuracy in the new release. We also show that the systematics still present in the data make the determination of the 3D geometry of the LMC a difficult endeavour; this is at the very limit of the usefulness of the Gaia EDR3 astrometry, but it may become feasib…
▽ More
We compare the Gaia DR2 and Gaia EDR3 performances in the study of the Magellanic Clouds and show the clear improvements in precision and accuracy in the new release. We also show that the systematics still present in the data make the determination of the 3D geometry of the LMC a difficult endeavour; this is at the very limit of the usefulness of the Gaia EDR3 astrometry, but it may become feasible with the use of additional external data.
We derive radial and tangential velocity maps and global profiles for the LMC for the several subsamples we defined. To our knowledge, this is the first time that the two planar components of the ordered and random motions are derived for multiple stellar evolutionary phases in a galactic disc outside the Milky Way, showing the differences between younger and older phases. We also analyse the spatial structure and motions in the central region, the bar, and the disc, providing new insights into features and kinematics.
Finally, we show that the Gaia EDR3 data allows clearly resolving the Magellanic Bridge, and we trace the density and velocity flow of the stars from the SMC towards the LMC not only globally, but also separately for young and evolved populations. This allows us to confirm an evolved population in the Bridge that is slightly shift from the younger population. Additionally, we were able to study the outskirts of both Magellanic Clouds, in which we detected some well-known features and indications of new ones.
△ Less
Submitted 4 January, 2021; v1 submitted 3 December, 2020;
originally announced December 2020.
-
Use of 3D printing in astronomical mirror fabrication
Authors:
Melanie Roulet,
Carolyn Atkins,
Emmanuel Hugot,
Robert Snell,
Bart van de Vorst,
Katherine Morris,
Michel Marcos,
Iain Todd,
Christopher Miller,
Joris Dufils,
Szigfrid Farkas,
Gyorgy Mezo,
Fabio Tenegi,
Afrodisio Vega-Moreno,
Hermine Schnetler
Abstract:
In this paper we are exploring the possibilities of 3D printing in the fabrication of mirrors for astronomy. Taking the advantages of 3D printing to solve the existing problems caused by traditional manufacturing, two proof-of-concept mirror fabrication strategies are investigated in this paper. The First concept is a deformable mirror with embedded actuator supports system to minimise errors caus…
▽ More
In this paper we are exploring the possibilities of 3D printing in the fabrication of mirrors for astronomy. Taking the advantages of 3D printing to solve the existing problems caused by traditional manufacturing, two proof-of-concept mirror fabrication strategies are investigated in this paper. The First concept is a deformable mirror with embedded actuator supports system to minimise errors caused by the bonding interfaces during mirror assembly. The second concept is the adaption of the Stress Mirror Polishing (SMP) technique to a variety of mirror shapes by implemented a printed thickness distribution on the back side of the mirror. Design investigations and prototypes plans are presented for both studies.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
High-contrast imager for Complex Aperture Telescopes (HiCAT): 2. Design overview and first light results
Authors:
Mamadou N'Diaye,
Elodie Choquet,
Sylvain Egron,
Laurent Pueyo,
Lucie Leboulleux,
Olivier Levecq,
Marshall D. Perrin,
Erin Elliot,
J. Kent Wallace,
Emmanuel Hugot,
Michel Marcos,
Marc Ferrari,
Chris A. Long,
Rachel Anderson,
Audrey DiFelice,
Rémi Soummer
Abstract:
We present a new high-contrast imaging testbed designed to provide complete solutions in wavefront sensing, control and starlight suppression with complex aperture telescopes. The testbed was designed to enable a wide range of studies of the effects of such telescope geometries, with primary mirror segmentation, central obstruction, and spiders. The associated diffraction features in the point spr…
▽ More
We present a new high-contrast imaging testbed designed to provide complete solutions in wavefront sensing, control and starlight suppression with complex aperture telescopes. The testbed was designed to enable a wide range of studies of the effects of such telescope geometries, with primary mirror segmentation, central obstruction, and spiders. The associated diffraction features in the point spread function make high-contrast imaging more challenging. In particular the testbed will be compatible with both AFTA-like and ATLAST-like aperture shapes, respectively on-axis monolithic, and on-axis segmented telescopes. The testbed optical design was developed using a novel approach to define the layout and surface error requirements to minimize amplitude-induced errors at the target contrast level performance. In this communication we compare the as-built surface errors for each optic to their specifications based on end-to-end Fresnel modeling of the testbed. We also report on the testbed optical and optomechanical alignment performance, coronagraph design and manufacturing, and preliminary first light results.
△ Less
Submitted 3 July, 2014;
originally announced July 2014.
