-
Deciphering the Evolution of Thermodynamic Properties and their Connection to the Global Kinematics of High-Speed Coronal Mass Ejections Using FRIS Model
Authors:
Soumyaranjan Khuntia,
Wageesh Mishra,
Yuming Wang,
Sudheer K Mishra,
Teresa Nieves-Chinchilla,
Shaoyu Lyu
Abstract:
Most earlier studies have been limited to estimating the kinematic evolution of coronal mass ejections (CMEs), and only limited efforts have been made to investigate their thermodynamic evolution. We focus on the interplay of the thermal properties of CMEs with their observed global kinematics. We implement the Flux rope Internal State (FRIS) model to estimate variations in the polytropic index, h…
▽ More
Most earlier studies have been limited to estimating the kinematic evolution of coronal mass ejections (CMEs), and only limited efforts have been made to investigate their thermodynamic evolution. We focus on the interplay of the thermal properties of CMEs with their observed global kinematics. We implement the Flux rope Internal State (FRIS) model to estimate variations in the polytropic index, heating rate per unit mass, temperature, pressure, and various internal forces. The model incorporates inputs of 3D kinematics obtained from the Graduated Cylindrical Shell (GCS) model. In our study, we chose nine fast-speed CMEs from 2010 to 2012. Our investigation elucidates that the selected fast-speed CMEs show a heat-release phase at the beginning, followed by a heat-absorption phase with a near-isothermal state in their later propagation phase. The thermal state transition, from heat release to heat absorption, occurs at around 3($\pm$0.3) to 7($\pm$0.7) $R_\odot$ for different CMEs. We found that the CMEs with higher expansion speeds experience a less pronounced sharp temperature decrease before gaining a near-isothermal state. The differential emission measurement (DEM) analysis findings, using multi-wavelength observation from SDO/AIA, also show a heat release state of CMEs at lower coronal heights. We also find the dominant internal forces influencing CME radial expansion at varying distances from the Sun. Our study shows the need to characterize the internal thermodynamic properties of CMEs better in both observational and modeling studies, offering insights for refining assumptions of a constant value of the polytropic index during the evolution of CMEs.
△ Less
Submitted 5 November, 2024;
originally announced November 2024.
-
Unraveling the Thermodynamic Enigma between Fast and Slow Coronal Mass Ejections
Authors:
Soumyaranjan Khuntia,
Wageesh Mishra,
Sudheer K Mishra,
Yuming Wang,
Jie Zhang,
Shaoyu Lyu
Abstract:
Coronal Mass Ejections (CMEs) are the most energetic expulsions of magnetized plasma from the Sun that play a crucial role in space weather dynamics. This study investigates the diverse kinematics and thermodynamic evolution of two CMEs (CME1: 2011 September 24 and CME2: 2018 August 20) at coronal heights where thermodynamic measurements are limited. The peak 3D propagation speed of CME1 is high (…
▽ More
Coronal Mass Ejections (CMEs) are the most energetic expulsions of magnetized plasma from the Sun that play a crucial role in space weather dynamics. This study investigates the diverse kinematics and thermodynamic evolution of two CMEs (CME1: 2011 September 24 and CME2: 2018 August 20) at coronal heights where thermodynamic measurements are limited. The peak 3D propagation speed of CME1 is high (1,885 km/s) with two-phase expansion (rapid and nearly constant), while the peak 3D propagation speed of CME2 is slow (420 km/s) with only a gradual expansion. We estimate the distance-dependent variations in the polytropic index, heating rate, temperature, and internal forces implementing the revised FRIS model, taking inputs of 3D kinematics estimated from the GCS model. We find CME1 exhibiting heat-release during its early-rapid acceleration decrease and jumps to the heat-absorption state during its constant acceleration phase. In contrast to CME1, CME2 shows a gradual transition from the near-adiabatic to the heat-absorption state during its gradually increasing acceleration. Our analysis reveals that although both CMEs show differential heating, they experience heat-absorption during their later propagation phases, approaching the isothermal state. The faster CME1 achieves an adiabatic state followed by an isothermal state at smaller distances from the Sun than the slower CME2. We also find that the expansion of CMEs is primarily influenced by centrifugal and thermal pressure forces, with the Lorentz force impeding expansion. Multi-wavelength observations of flux-ropes at source regions support the FRIS model-derived findings at initially observed lower coronal heights.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Confined and eruptive catastrophes of solar magnetic flux ropes caused by mass loading and unloading
Authors:
Quanhao Zhang,
Rui Liu,
Yuming Wang,
Xiaolei Li,
Shaoyu Lyu
Abstract:
It is widely accepted that coronal magnetic flux ropes are the core structures of large-scale solar eruptive activities, which inflict dramatic impacts on the solar-terrestrial system. Previous studies have demonstrated that varying magnetic properties of a coronal flux rope system could result in a catastrophe of the rope, which may trigger solar eruptive activities. Since the total mass of a flu…
▽ More
It is widely accepted that coronal magnetic flux ropes are the core structures of large-scale solar eruptive activities, which inflict dramatic impacts on the solar-terrestrial system. Previous studies have demonstrated that varying magnetic properties of a coronal flux rope system could result in a catastrophe of the rope, which may trigger solar eruptive activities. Since the total mass of a flux rope also plays an important role in stabilizing the rope, we use 2.5-dimensional magnetohydrodynamic (MHD) numerical simulations in this letter to investigate how a flux rope evolves as its total mass varies. It is found that an unloading process that decreases the total mass of the rope could result in an upward (eruptive) catastrophe in the flux rope system, during which the rope jumps upward and the magnetic energy is released. This indicates that mass unloading processes could initiate the eruption of the flux rope. Moreover, when the system is not too diffusive, there is also a downward (confined) catastrophe that could be caused by mass loading processes, via which the total mass accumulates. The magnetic energy, however, is increased during the downward catastrophe, indicating that mass loading processes could cause confined activities that may contribute to the storage of energy before the onset of coronal eruptions.
△ Less
Submitted 20 August, 2021;
originally announced August 2021.
-
Three-dimensional Reconstruction of Coronal Mass Ejections by CORAR Technique through Different Stereoscopic Angle of STEREO Twin Spacecraft
Authors:
Shaoyu Lyu,
Yuming Wang,
Xiaolei Li,
Jingnan Guo,
Chuanbing Wang,
Quanhao Zhang
Abstract:
Recently, we developed the Correlation-Aided Reconstruction (CORAR) method to reconstruct solar wind inhomogeneous structures, or transients, using dual-view white-light images (Li et al. 2020; Li et al. 2018). This method is proved to be useful for studying the morphological and dynamical properties of transients like blobs and coronal mass ejection (CME), but the accuracy of reconstruction may b…
▽ More
Recently, we developed the Correlation-Aided Reconstruction (CORAR) method to reconstruct solar wind inhomogeneous structures, or transients, using dual-view white-light images (Li et al. 2020; Li et al. 2018). This method is proved to be useful for studying the morphological and dynamical properties of transients like blobs and coronal mass ejection (CME), but the accuracy of reconstruction may be affected by the separation angle between the two spacecraft (Lyu et al. 2020). Based on the dual-view CME events from the Heliospheric Imager CME Join Catalogue (HIJoinCAT) in the HELCATS (Heliospheric Cataloguing, Analysis and Techniques Service) project, we study the quality of the CME reconstruction by the CORAR method under different STEREO stereoscopic angles. We find that when the separation angle of spacecraft is around 150°, most CME events can be well reconstructed. If the collinear effect is considered, the optimal separation angle should locate between 120° and 150°. Compared with the CME direction given in the Heliospheric Imager Geometrical Catalogue (HIGeoCAT) from HELCATS, the CME parameters obtained by the CORAR method are reasonable. However, the CORAR-obtained directions have deviations towards the meridian plane in longitude, and towards the equatorial plane in latitude. An empirical formula is proposed to correct these deviations. This study provides the basis for the spacecraft configuration of our recently proposed Solar Ring mission concept (Wang et al. 2020b).
△ Less
Submitted 8 January, 2021;
originally announced January 2021.
-
Optimal Stereoscopic Angle for Reconstructing Solar Wind Inhomogeneous Structures
Authors:
Shaoyu Lyu,
Xiaolei Li,
Yuming Wang
Abstract:
This paper is aimed at finding the best separation angle between spacecraft for the three-dimensional reconstruction of solar-wind inhomogeneous structures by the CORrelation-Aided Reconstruction(CORAR) method. The analysis is based on the dual-point heliospheric observations from the STEREO HI-1 cameras. We produced synthetic HI-1 white-light images containing artificial blob-like structures in d…
▽ More
This paper is aimed at finding the best separation angle between spacecraft for the three-dimensional reconstruction of solar-wind inhomogeneous structures by the CORrelation-Aided Reconstruction(CORAR) method. The analysis is based on the dual-point heliospheric observations from the STEREO HI-1 cameras. We produced synthetic HI-1 white-light images containing artificial blob-like structures in different positions in the common field of view of the two HI-1 cameras and reconstruct the structures with CORAR method. The distributions of performance levels of the reconstruction for spacecraft separation of $60^{\circ}$, $90^{\circ}$, $120^{\circ}$ and $150^{\circ}$ are obtained. It is found that when the separation angle is $120^{\circ}$, the performance of the reconstruction is the best and the separation angle of $90^{\circ}$ is the next. A brief discussion of the results are given as well. Based on this study, we suggest the optimal layout scheme of the recently proposed Solar Ring mission, which is designed to routinely observe the Sun and the inner heliosphere from multiple perspectives in the ecliptic plane.
△ Less
Submitted 29 July, 2020; v1 submitted 14 May, 2020;
originally announced May 2020.
-
Reconstructing solar wind inhomogeneous structures from stereoscopic observations in white-light: Solar wind transients in 3D
Authors:
Xiaolei Li,
Yuming Wang,
Rui Liu,
Chenglong Shen,
Quanhao Zhang,
Shaoyu Lyu,
Bin Zhuang,
Fang Shen,
Jiajia Liu,
Yutian Chi
Abstract:
White-light images from Heliospheric Imager-1 (HI1) onboard the Solar Terrestrial Relations Observatory (STEREO) provide 2-dimensional (2D) global views of solar wind transients traveling in the inner heliosphere from two perspectives. How to retrieve the hidden three-dimensional (3D) features of the transients from these 2D images is intriguing but challenging. In our previous work (Li et al., 20…
▽ More
White-light images from Heliospheric Imager-1 (HI1) onboard the Solar Terrestrial Relations Observatory (STEREO) provide 2-dimensional (2D) global views of solar wind transients traveling in the inner heliosphere from two perspectives. How to retrieve the hidden three-dimensional (3D) features of the transients from these 2D images is intriguing but challenging. In our previous work (Li et al., 2018), a 'correlation-aided' method is developed to recognize the solar wind transients propagating along the Sun-Earth line based on simultaneous HI1 images from two STEREO spacecraft. Here the method is extended from the Sun-Earth line to the whole 3D space to reconstruct the solar wind transients in the common field of view of STEREO HI1 cameras. We demonstrate the capability of the method by showing the 3D shapes and propagation directions of a coronal mass ejection (CME) and three small-scale blobs during 3-4 April 2010. Comparing with some forward modeling methods, we found our method reliable in terms of the position, angular width and propagation direction. Based on our 3D reconstruction result, an angular distorted, nearly North-South oriented CME on 3 April 2010 is revealed, manifesting the complexity of a CME's 3D structure.
△ Less
Submitted 3 May, 2020;
originally announced May 2020.
