-
3D non-LTE iron abundances in FG-type dwarfs
Authors:
A. M. Amarsi,
S. Liljegren,
P. E. Nissen
Abstract:
Spectroscopic measurements of iron abundances are prone to systematic modelling errors. We present 3D non-LTE calculations across 32 STAGGER-grid models with effective temperatures from 5000 K to 6500 K, surface gravities of 4.0 dex and 4.5 dex, and metallicities from $-$3 dex to 0 dex, and study the effects on 171 Fe I and 12 Fe II optical lines. In warm metal-poor stars, the 3D non-LTE abundance…
▽ More
Spectroscopic measurements of iron abundances are prone to systematic modelling errors. We present 3D non-LTE calculations across 32 STAGGER-grid models with effective temperatures from 5000 K to 6500 K, surface gravities of 4.0 dex and 4.5 dex, and metallicities from $-$3 dex to 0 dex, and study the effects on 171 Fe I and 12 Fe II optical lines. In warm metal-poor stars, the 3D non-LTE abundances are up to 0.5 dex larger than 1D LTE abundances inferred from Fe I lines of intermediate excitation potential. In contrast, the 3D non-LTE abundances can be 0.2 dex smaller in cool metal-poor stars when using Fe I lines of low excitation potential. The corresponding abundance differences between 3D non-LTE and 1D non-LTE are generally less severe but can still reach $\pm$0.2 dex. For Fe II lines the 3D abundances range from up to 0.15 dex larger, to 0.10 dex smaller, than 1D abundances, with negligible departures from 3D LTE except for the warmest stars at the lowest metallicities. The results were used to correct 1D LTE abundances of the Sun and Procyon (HD 61421), and of the metal-poor stars HD 84937 and HD 140283, using an interpolation routine based on neural networks. The 3D non-LTE models achieve an improved ionisation balance in all four stars. In the two metal-poor stars, they remove excitation imbalances that amount to 250 K to 300 K errors in effective temperature. For Procyon, the 3D non-LTE models suggest [Fe/H] = 0.11 $\pm$ 0.03, which is significantly larger than literature values based on simpler models. We make the 3D non-LTE interpolation routine for FG-type dwarfs publicly available, in addition to 1D non-LTE departure coefficients for standard MARCS models of FGKM-type dwarfs and giants. These tools, together with an extended 3D LTE grid for Fe II from 2019, can help improve the accuracy of stellar parameter and iron abundance determinations for late-type stars.
△ Less
Submitted 9 December, 2022; v1 submitted 27 September, 2022;
originally announced September 2022.
-
The molecular chemistry of Type Ibc supernovae, and diagnostic potential with the James Webb Space Telescope
Authors:
S. Liljegren,
A. Jerkstrand,
P. S. Barklem,
G. Nyman,
R. Brady,
S. N. Yurchenko
Abstract:
We aim to investigate how the molecular chemistry in stripped-envelope supernovae (SESNe) affect physical conditions and optical spectra, and produce ro-vibrational emission in the mid-infrared (MIR). We also aim to assess the diagnostic potential of observations of such MIR emission with JWST. We coupled a chemical kinetic network including carbon, oxygen, silicon, and sulfur-bearing molecules in…
▽ More
We aim to investigate how the molecular chemistry in stripped-envelope supernovae (SESNe) affect physical conditions and optical spectra, and produce ro-vibrational emission in the mid-infrared (MIR). We also aim to assess the diagnostic potential of observations of such MIR emission with JWST. We coupled a chemical kinetic network including carbon, oxygen, silicon, and sulfur-bearing molecules into the nonlocal thermal equilibrium (NLTE) spectral synthesis code SUMO. We let four species - CO, SiO, SiS, and SO - participate in NLTE cooling of the gas to achieve self-consistency between the molecule formation and the temperature. We applied the new framework to model the spectrum of a Type Ic SN in the 100-600d time range. Molecules are predicted to form in SESN ejecta in significant quantities (typical mass $10^{-3}$ $M_\odot$) throughout the 100-600d interval. The impact on the temperature and optical emission depends on the density of the oxygen zones and varies with epoch. For example, the [O I] 6300, 6364 feature can be quenched by molecules from 200 to 450d depending on density. The MIR predictions show strong emission in the fundamental bands of CO, SiO, and SiS, and in the CO and SiO overtones. Type Ibc SN ejecta have a rich chemistry and considering the effect of molecules is important for modeling the temperature and atomic emission in the nebular phase. Observations of SESNe with JWST hold promise to provide the first detections of SiS and SO, and to give information on zone masses and densities of the ejecta. Combined optical, near-infrared, and MIR observations can break degeneracies and achieve a more complete picture of the nucleosynthesis, chemistry, and origin of Type Ibc SNe.
△ Less
Submitted 25 June, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
Carbon monoxide formation and cooling in supernovae
Authors:
Sofie Liljegren,
Anders Jerkstrand,
Jon Grumer
Abstract:
The inclusion of molecular physics is an important piece that tends to be missing from the puzzle when modeling the spectra of supernovae (SNe). Molecules have both a direct impact on the spectra, particularly in the infrared, and an indirect one as a result of their influence on certain physical conditions, such as temperature. In this paper, we aim to investigate molecular formation and non-loca…
▽ More
The inclusion of molecular physics is an important piece that tends to be missing from the puzzle when modeling the spectra of supernovae (SNe). Molecules have both a direct impact on the spectra, particularly in the infrared, and an indirect one as a result of their influence on certain physical conditions, such as temperature. In this paper, we aim to investigate molecular formation and non-local thermodynamic equilibrium (NLTE) cooling, with a particular focus on CO, the most commonly detected molecule in supernovae. We also aim to determine the dependency of supernova chemistry on physical parameters and the relative sensitivity to rate uncertainties. We implemented a chemical kinetic description of the destruction and formation of molecules into the SN spectral synthesis code SUMO. In addition, selected molecules were coupled into the full NLTE level population framework and, thus, we incorporated molecular NLTE cooling into the temperature equation. We produced a test model of the CO formation in SN 1987A between 150 and 600 days and investigated the sensitivity of the resulting molecular masses to the input parameters. We find that there is a close inter-dependency between the thermal evolution and the amount of CO formed, mainly through an important temperature-sensitive CO destruction process with O+. After a few hundred days, CO completely dominates the cooling of the oxygen-carbon zone of the supernova which, therefore, contributes little optical emission. The uncertainty of the calculated CO mass scales approximately linearly with the typical uncertainty factor for individual rates. We demonstrate how molecular masses can potentially be used to constrain various physical parameters of the supernova.
△ Less
Submitted 7 August, 2020;
originally announced August 2020.
-
An extensive grid of DARWIN models for M-type AGB stars I. Mass-loss rates and other properties of dust-driven winds
Authors:
S. Bladh,
S. Liljegren,
S. Höfner,
B. Aringer,
P. Marigo
Abstract:
The purpose of this work is to present an extensive grid of dynamical atmosphere and wind models for M-type AGB stars, covering a wide range of relevant stellar parameters. We used the DARWIN code, which includes frequency-dependent radiation-hydrodynamics and a time-dependent description of dust condensation and evaporation, to simulate the dynamical atmosphere. The wind-driving mechanism is phot…
▽ More
The purpose of this work is to present an extensive grid of dynamical atmosphere and wind models for M-type AGB stars, covering a wide range of relevant stellar parameters. We used the DARWIN code, which includes frequency-dependent radiation-hydrodynamics and a time-dependent description of dust condensation and evaporation, to simulate the dynamical atmosphere. The wind-driving mechanism is photon scattering on submicron-sized Mg$_2$SiO$_4$ grains. The grid consists of $\sim4000$ models, with luminosities from $L_\star=890\,{\mathrm{L}}_\odot$ to $L_\star=40000\,{\mathrm{L}}_\odot$ and effective temperatures from 2200K to 3400K. For the first time different current stellar masses are explored with M-type DARWIN models, ranging from 0.75M$_\odot$ to 3M$_\odot$. The modelling results are radial atmospheric structures, dynamical properties such as mass-loss rates and wind velocities, and dust properties (e.g. grain sizes, dust-to-gas ratios, and degree of condensed Si). We find that the mass-loss rates of the models correlate strongly with luminosity. They also correlate with the ratio $L_*/M_*$: increasing $L_*/M_*$ by an order of magnitude increases the mass-loss rates by about three orders of magnitude, which may naturally create a superwind regime in evolution models. There is, however, no discernible trend of mass-loss rate with effective temperature, in contrast to what is found for C-type AGB stars. We also find that the mass-loss rates level off at luminosities higher than $\sim14000\,{\mathrm{L}}_\odot$, and consequently at pulsation periods longer than $\sim800$ days. The final grain radii range from 0.25 micron to 0.6 micron. The amount of condensed Si is typically between 10% and 40%, with gas-to-dust mass ratios between 500 and 4000.
△ Less
Submitted 17 May, 2019; v1 submitted 24 April, 2019;
originally announced April 2019.
-
Carbon star wind models at solar and sub-solar metallicities: a comparative study. I. Mass loss and the properties of dust-driven winds
Authors:
S. Bladh,
K. Eriksson,
P. Marigo,
S. Liljegren,
B. Aringer
Abstract:
The atmospheres and winds of C-type AGB stars are modeled with the 1D spherically symmetric radiation-hydrodynamical code DARWIN. To explore the metallicity-dependence of mass loss we calculate model grids at three different chemical abundances. Since carbon may be dredged up during the thermal pulses as AGB stars evolve, we keep the carbon abundance as a free parameter. The models in these three…
▽ More
The atmospheres and winds of C-type AGB stars are modeled with the 1D spherically symmetric radiation-hydrodynamical code DARWIN. To explore the metallicity-dependence of mass loss we calculate model grids at three different chemical abundances. Since carbon may be dredged up during the thermal pulses as AGB stars evolve, we keep the carbon abundance as a free parameter. The models in these three different grids all have a current mass of one solar mass; effective temperatures of 2600K, 2800K, 3000K, or 3200K; and stellar luminosities equal to log(L/Lsun)=3.70, 3.85, or 4.00.
The models show that mass loss in carbon stars is facilitated by high luminosities, low effective temperatures, and a high carbon excess (C-O) at both solar and subsolar metallicities. Similar combinations of effective temperature, luminosity, and carbon excess produce outflows at both solar and subsolar metallicities. There are no large systematic differences in the mass-loss rates and wind velocities produced by these wind models with respect to metallicity, nor any systematic difference concerning the distribution of grain sizes or how much carbon is condensed into dust. DARWIN models at subsolar metallicity have approximately 15% lower mass-loss rates compared to DARWIN models at solar metallicity with the same stellar parameters and carbon excess. For both solar and subsolar environments typical grain sizes range between 0.1 and 0.5 micron, the degree of condensed carbon varies between 5% and 40%, and the gas-to-dust ratios between 500 and 10000. Furthermore, stellar evolution models can use the mass-loss rates calculated from DARWIN models at solar metallicity when modeling the AGB phase at subsolar metallicities if carbon excess is used as the critical abundance parameter instead of the C/O ratio.
△ Less
Submitted 14 February, 2019;
originally announced February 2019.
-
Atmospheres and wind properties of non-spherical AGB stars
Authors:
S. Liljegren,
S. Höfner,
B. Freytag,
S. Bladh
Abstract:
The wind-driving mechanism of asymptotic giant branch (AGB) stars is commonly attributed to a two-step process: first, gas in the stellar atmosphere is levitated by shockwaves caused by stellar pulsation, then accelerated outwards by radiative pressure on newly formed dust, inducing a wind. Dynamical modelling of such winds usually assumes a spherically symmetric star. We explore the potential con…
▽ More
The wind-driving mechanism of asymptotic giant branch (AGB) stars is commonly attributed to a two-step process: first, gas in the stellar atmosphere is levitated by shockwaves caused by stellar pulsation, then accelerated outwards by radiative pressure on newly formed dust, inducing a wind. Dynamical modelling of such winds usually assumes a spherically symmetric star. We explore the potential consequences of complex stellar surface structures, as predicted by three-dimensional (3D) star-in-a-box modelling of M-type AGB stars, on the resulting wind properties with the aim to improve the current wind models. Two different modelling approaches are used; the CO$^5$BOLD 3D star-in-a-box code to simulate the convective, pulsating interior and lower atmosphere of the star, and the DARWIN one-dimensional (1D) code to describe the dynamical atmosphere where the wind is accelerated. The gas dynamics of the inner atmosphere region at distances of $R\sim1-2R_\star$, which both modelling approaches simulate, are compared. Dynamical properties and luminosity variations derived from CO$^5$BOLD interior models are used as input for the inner boundary in DARWIN wind models in order to emulate the effects of giant convection cells and pulsation, and explore their influence on the dynamical properties. The CO$^5$BOLD models are inherently anisotropic, with non-uniform shock fronts and varying luminosity amplitudes, in contrast to the spherically symmetrical DARWIN wind models. DARWIN wind models with CO$^5$BOLD-derived inner boundary conditions produced wind velocities and mass-loss rates comparable to the standard DARWIN models, however the winds show large density variations on time-scales of 10-20 years.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
CO envelope of the symbiotic star R Aqr seen by ALMA
Authors:
S. Ramstedt,
S. Mohamed,
T. Olander,
W. H. T. Vlemmings,
T. Khouri,
S. Liljegren
Abstract:
The symbiotic star R Aqr is part of a small sample of binary AGB stars observed with ALMA. The sample stars are: R Aqr, Mira, W Aql, and pi1 Gru. The sample covers a range in binary separation and wind properties, where R Aqr is the source with the smallest separation. The R Aqr binary pair consists of an M-type AGB star and a white dwarf at a separation of 45 mas, equivalent to about 10 AU at 218…
▽ More
The symbiotic star R Aqr is part of a small sample of binary AGB stars observed with ALMA. The sample stars are: R Aqr, Mira, W Aql, and pi1 Gru. The sample covers a range in binary separation and wind properties, where R Aqr is the source with the smallest separation. The R Aqr binary pair consists of an M-type AGB star and a white dwarf at a separation of 45 mas, equivalent to about 10 AU at 218 pc. The aim of the ALMA study is to investigate the dependence of the wind shaping on the binary separation and to provide constraints for hydrodynamical binary interaction models. R Aqr is particularly interesting as the source with the smallest separation and a complex circumstellar environment that is strongly affected by the interaction between the two stars and by the high-energy radiation resulting from this interaction and from the hot white dwarf companion. The CO(J=3-2) line emission has been observed at 0.5" spatial resolution. The CO envelope around the binary pair is marginally resolved, showing what appears to be a rather complex distribution. The outer radius of the CO emitting region is estimated from the data and found to be about a factor of 10 larger than previously thought. This implies an average mass-loss rate during the past 100 yr of 2x10-7 Msun/yr, a factor of 45 less than previous estimates. The channel maps are presented and the molecular gas distribution is discussed and set into the context of what was previously known about the system. Additional molecular line emission detected within the bandwidth covered by the ALMA observations is also presented. Because of the limited extent of the emission, firm conclusions about the dynamical evolution of the system will have to wait for higher spatial resolution observations. However, the data presented here support the assumption that the mass-loss rate from the Mira star strongly varies and is focused on the orbital plane.
△ Less
Submitted 13 June, 2018;
originally announced June 2018.
-
Pulsation-induced atmospheric dynamics in M-type AGB stars. Effects on wind properties, photometric variations and near-IR CO line profiles
Authors:
S. Liljegren,
S. Höfner,
K. Eriksson,
W. Nowotny
Abstract:
Wind-driving in asymptotic giant branch (AGB) stars is commonly attributed to a two-step process. First, matter in the stellar atmosphere is levitated by shock waves, induced by stellar pulsation, and second, this matter is accelerated by radiation pressure on dust, resulting in a wind. In dynamical atmosphere and wind models the effects of the stellar pulsation are often simulated by a simplistic…
▽ More
Wind-driving in asymptotic giant branch (AGB) stars is commonly attributed to a two-step process. First, matter in the stellar atmosphere is levitated by shock waves, induced by stellar pulsation, and second, this matter is accelerated by radiation pressure on dust, resulting in a wind. In dynamical atmosphere and wind models the effects of the stellar pulsation are often simulated by a simplistic prescription at the inner boundary. We test a sample of dynamical models for M-type AGB stars, for which we kept the stellar parameters fixed to values characteristic of a typical Mira variable but varied the inner boundary condition. The aim was to evaluate the effect on the resulting atmosphere structure and wind properties. The results of the models are compared to observed mass-loss rates and wind velocities, photometry, and radial velocity curves, and to results from 1D radial pulsation models. Dynamical atmosphere models are calculated, using the DARWIN code for different combinations of photospheric velocities and luminosity variations. The inner boundary is changed by introducing an offset between maximum expansion of the stellar surface and the luminosity and/or by using an asymmetric shape for the luminosity variation. Models that resulted in realistic wind velocities and mass-loss rates, when compared to observations, also produced realistic photometric variations. For the models to also reproduce the characteristic radial velocity curve present in Mira stars (derived from CO $Δv = 3$ lines), an overall phase shift of 0.2 between the maxima of the luminosity and radial variation had to be introduced. We find that a group of models with different boundary conditions (29 models, including the model with standard boundary conditions) results in realistic velocities and mass-loss rates, and in photometric variations.
△ Less
Submitted 26 June, 2017;
originally announced June 2017.
-
Global 3D radiation-hydrodynamics models of AGB stars. Effects of convection and radial pulsations on atmospheric structures
Authors:
Bernd Freytag,
Sofie Liljegren,
Susanne Höfner
Abstract:
Context: Observations of asymptotic giant branch (AGB) stars with increasing spatial resolution reveal new layers of complexity of atmospheric processes on a variety of scales. Aim: To analyze the physical mechanisms that cause asymmetries and surface structures in observed images, we use detailed 3D dynamical simulations of AGB stars; these simulations self-consistently describe convection and pu…
▽ More
Context: Observations of asymptotic giant branch (AGB) stars with increasing spatial resolution reveal new layers of complexity of atmospheric processes on a variety of scales. Aim: To analyze the physical mechanisms that cause asymmetries and surface structures in observed images, we use detailed 3D dynamical simulations of AGB stars; these simulations self-consistently describe convection and pulsations. Methods: We used the CO5BOLD radiation-hydrodynamics code to produce an exploratory grid of global "star-in-a-box" models of the outer convective envelope and the inner atmosphere of AGB stars to study convection, pulsations, and shock waves and their dependence on stellar and numerical parameters. Results: The model dynamics are governed by the interaction of long-lasting giant convection cells, short-lived surface granules, and strong, radial, fundamental-mode pulsations. Radial pulsations and shorter wavelength, traveling, acoustic waves induce shocks on various scales in the atmosphere. Convection, waves, and shocks all contribute to the dynamical pressure and, thus, to an increase of the stellar radius and to a levitation of material into layers where dust can form. Consequently, the resulting relation of pulsation period and stellar radius is shifted toward larger radii compared to that of non-linear 1D models. The dependence of pulsation period on luminosity agrees well with observed relations. The interaction of the pulsation mode with the non-stationary convective flow causes occasional amplitude changes and phase shifts. The regularity of the pulsations decreases with decreasing gravity as the relative size of convection cells increases. The model stars do not have a well-defined surface. Instead, the light is emitted from a very extended inhomogeneous atmosphere with a complex dynamic pattern of high-contrast features.
△ Less
Submitted 17 February, 2017;
originally announced February 2017.
-
Dust-driven winds of AGB stars: The critical interplay of atmospheric shocks and luminosity variations
Authors:
S. Liljegren,
S. Höfner,
W. Nowotny,
K. Eriksson
Abstract:
Winds of AGB stars are thought to be driven by a combination of pulsation-induced shock waves and radiation pressure on dust. In dynamic atmosphere and wind models, the stellar pulsation is often simulated by prescribing a simple sinusoidal variation in velocity and luminosity at the inner boundary of the model atmosphere. We experiment with different forms of the luminosity variation in order to…
▽ More
Winds of AGB stars are thought to be driven by a combination of pulsation-induced shock waves and radiation pressure on dust. In dynamic atmosphere and wind models, the stellar pulsation is often simulated by prescribing a simple sinusoidal variation in velocity and luminosity at the inner boundary of the model atmosphere. We experiment with different forms of the luminosity variation in order to assess the effects on the wind velocity and mass-loss rate, when progressing from the simple sinusoidal recipe towards more realistic descriptions. Using state-of-the-art dynamical models of C-rich AGB stars, a range of different asymmetric shapes of the luminosity variation and a range of phase shifts of the luminosity variation relative to the radial variation are tested. These tests are performed on two stellar atmosphere models. The first model has dust condensation and, as a consequence, a stellar wind is triggered, while the second model lacks both dust and wind. The first model with dust and stellar wind is very sensitive to moderate changes in the luminosity variation. There is a complex relationship between the luminosity minimum, and dust condensation: changing the phase corresponding to minimum luminosity can either increase or decrease mass-loss rate and wind velocity. The luminosity maximum dominates the radiative pressure on the dust, which in turn, is important for driving the wind. These effects of changed luminosity variation are coupled with the dust formation. In contrast there is very little change to the structure of the model without dust. Changing the luminosity variation, both by introducing a phase shift and by modifying the shape, influences wind velocity and the mass-loss rate. To improve wind models it would probably be desirable to extract boundary conditions from 3D dynamical interior models or stellar pulsation models.
△ Less
Submitted 22 March, 2016;
originally announced March 2016.
