Showing 1–12 of 12 results for author: Lehmann, M

Convective Overstability in Radially Global Protoplanetary Disks. II. Impact on planetesimal formation

Authors: Marius Lehmann, Min-Kai Lin

Abstract: The Convective Overstability (COS) is a hydrodynamic instability occurring in protoplanetary disk (PPD) regions with an adverse radial entropy gradient. It is a potential driver of turbulence and may influence planetesimal formation. In this second paper of our series, we study the effects of the COS on dust dynamics in radially global PPD simulations, focusing on the mid-plane region, where verti… ▽ More The Convective Overstability (COS) is a hydrodynamic instability occurring in protoplanetary disk (PPD) regions with an adverse radial entropy gradient. It is a potential driver of turbulence and may influence planetesimal formation. In this second paper of our series, we study the effects of the COS on dust dynamics in radially global PPD simulations, focusing on the mid-plane region, where vertical gravity on the dust is included. Axisymmetric 2D simulations show susceptibility to both the COS and the Vertically Shearing Streaming Instability. For a Stokes number tau = 0.1, strong dust clumping occurs only for highly super-solar initial metallicities Z greater than 0.05. In 3D non-axisymmetric simulations, the COS generates large-scale, long-lived vortices that have the potential to efficiently concentrate dust, with dust accumulation strengthening as tau increases. For tau = 0.01, no strong clumping occurs even at metallicities as high as Z = 0.1, and vortices remain robust and long-lived. At tau = 0.04, strong dust clumping is observed for solar metallicity (Z = 0.01) and higher. For tau = 0.1, clumping occurs even at strongly sub-solar metallicities (Z greater or equal to 0.004), peaking at Z approximately 0.01 to 0.03, including solar values. Under these conditions, vortices weaken significantly and become more spatially extended. At higher metallicities (Z greater or equal to 0.04) with tau = 0.1, large-scale vortex formation is suppressed, leading to nearly axisymmetric dust rings, which can still undergo clumping via the classical Streaming Instability. △ Less

Submitted 3 March, 2025; originally announced March 2025.

Comments: 25 pages, 15 figures

Dust dynamics in radially convective regions of protoplanetary disks

Authors: Min-Kai Lin, Marius Lehmann

Abstract: Hydrodynamic instabilities likely operate in protoplanetary disks. One candidate, Convective Overstability (COS), can be triggered in regions with a negative radial entropy gradient. The ensuing turbulence and flow structures are expected to affect dust dynamics directly. We revisit the interaction between dust and the COS with high-resolution spectral simulations in the unstratified, axisymmetric… ▽ More Hydrodynamic instabilities likely operate in protoplanetary disks. One candidate, Convective Overstability (COS), can be triggered in regions with a negative radial entropy gradient. The ensuing turbulence and flow structures are expected to affect dust dynamics directly. We revisit the interaction between dust and the COS with high-resolution spectral simulations in the unstratified, axisymmetric Boussinesq shearing box framework. We find zonal flows, or pressure bumps, formed by the COS trap dust, as expected, but dust densities increase at most by a factor of $O(10)$ over its background value due to the zonal flows' unsteady nature. Furthermore, dust feedback can impede the formation of zonal flows, even at small dust-to-gas ratios $ε\sim O(0.1)$. We interpret this phenomenon as a competition between the negative gas angular momentum flux associated with zonal flow formation and the positive dust angular momentum flux associated with its drift towards pressure maxima. Dust concentration significantly weakens when a large-scale radial pressure gradient induces a background dust drift. Ultimately, we find that dust concentration by COS-induced zonal flows is limited to $ε\lesssim 1$. Whether this can be improved under more realistic geometries must be addressed with stratified and full 3D simulations at equivalent resolutions. △ Less

Submitted 16 January, 2025; originally announced January 2025.

Comments: Accepted by ApJ

Convective overstability in radially global protoplanetary disks I -- Pure gas dynamics

Authors: Marius Lehmann, Min-Kai Lin

Abstract: Protoplanetary disks are prone to several hydrodynamic instabilities. One candidate, Convective Overstability (COS), can drive radial semi-convection that may influence dust dynamics and planetesimal formation. However, the COS has primarily been studied in local models. This paper investigates the COS near the mid-plane of radially global disk models. We first conduct a global linear stability an… ▽ More Protoplanetary disks are prone to several hydrodynamic instabilities. One candidate, Convective Overstability (COS), can drive radial semi-convection that may influence dust dynamics and planetesimal formation. However, the COS has primarily been studied in local models. This paper investigates the COS near the mid-plane of radially global disk models. We first conduct a global linear stability analysis, which shows that linear COS modes exist only radially inward of their Lindblad resonance (LR). The fastest-growing modes have LRs near the inner radial domain boundary with effective radial wavelengths that can be a substantial fraction of the disk radius. We then perform axisymmetric global simulations and find that the COS's nonlinear saturation is similar to previous incompressible shearing box simulations. In particular, we observe the onset of persistent zonal and elevator flows for sufficiently steep radial entropy gradients. In full 3D, non-axisymmetric global simulations, we find the COS produces large-scale, long-lived vortices, which induce outward radial transport of angular momentum via the excitation of spiral density waves. The corresponding $α$-viscosity values of order $10^{-3}$ agree well with those found in previous 3D compressible shearing box simulations. However, in global disks, significant modifications to their radial structure are found, including the formation of pressure bumps. Interestingly, the COS typically generates an outward radial mass transport, i.e. decretion. We briefly discuss the possible implications of our results for planetesimal formation and for interpreting dust rings and asymmetries observed in protoplanetary disks. △ Less

Submitted 8 May, 2024; originally announced May 2024.

Comments: 30 pages, 24 figures

Viscous overstability in dense planetary rings -- Effect of vertical motions and dense packing

Authors: Marius Lehmann, Heikki Salo

Abstract: We investigate the linear axisymmetric viscous overstability in dense planetary rings with typical values of the dynamical optical depth $τ\gtrsim 0.5$. We develop a granular flow model which accounts for the particulate nature of a planetary ring subjected to dissipative particle collisions. The model captures the dynamical evolution of the disc's vertical thickness, temperature, and effects rela… ▽ More We investigate the linear axisymmetric viscous overstability in dense planetary rings with typical values of the dynamical optical depth $τ\gtrsim 0.5$. We develop a granular flow model which accounts for the particulate nature of a planetary ring subjected to dissipative particle collisions. The model captures the dynamical evolution of the disc's vertical thickness, temperature, and effects related to a finite volume filling factor of the ring fluid. We compute equilibrium states of self-gravitating and non-self-gravitating rings, which compare well with existing results from kinetic models and N-Body simulations. Subsequently, we conduct a linear stability analysis of our model. We briefly discuss the different linear eigenmodes of the system and compare with existing literature by applying corresponding limiting approximations. We then focus on the viscous overstability, analysing the effect of temperature variations, radial and vertical self-gravity, and for the first time the effects of vertical motions on the instability. In addition, we perform local N-body simulations incorporating radial and vertical self-gravity. Critical values for the optical depth and the filling factor for the onset of instability resulting from our N-body simulations compare well with our model predictions under the neglect of radial self-gravity. When radial self-gravity is included, agreement with N-body simulations can be achieved by adopting enhanced values of the bulk viscous stress. △ Less

Submitted 21 December, 2023; originally announced December 2023.

Comments: 24 pages, 11 figures

Filament formation due to diffusive instabilities in dusty protoplanetary disks

Authors: Konstantin Gerbig, Min-Kai Lin, Marius Lehmann

Abstract: We report the finding of a new, local diffusion instability in a protoplanetary disk, which can operate in a dust fluid, subject to mass diffusion, shear viscosity, and dust-gas drag, provided diffusivity, viscosity, or both decrease sufficiently rapidly with increasing dust surface mass density. We devise a vertically averaged, axisymmetric hydrodynamic model to describe a dense, mid-plane dust l… ▽ More We report the finding of a new, local diffusion instability in a protoplanetary disk, which can operate in a dust fluid, subject to mass diffusion, shear viscosity, and dust-gas drag, provided diffusivity, viscosity, or both decrease sufficiently rapidly with increasing dust surface mass density. We devise a vertically averaged, axisymmetric hydrodynamic model to describe a dense, mid-plane dust layer in a protoplanetary disk. The gas is modeled as a passive component, imposing an effective, diffusion-dependent pressure, mass diffusivity, and viscosity onto the otherwise collisionless dust fluid, via turbulence excited by the gas alone, or dust and gas in combination. In particular, we argue that such conditions are met when the dust-gas mixture generates small-scale turbulence through the streaming instability, as supported by recent measurements of dust mass diffusion slopes in simulations. We hypothesize that the newly discovered instability may be the origin of filamentary features, almost ubiquitously found in simulations of the streaming instability. In addition, our model allows for growing oscillatory modes, which operate in a similar fashion as the axisymmetric viscous overstability in dense planetary rings. However, it remains speculative if the required conditions for such modes can be met in protoplanetary disks. △ Less

Submitted 21 August, 2024; v1 submitted 29 November, 2023; originally announced November 2023.

Comments: Updated ArXiv Version with the contents of in press erratum, 22 pages, 13 figures

Journal ref: Konstantin Gerbig et al 2024 ApJ 961 183

Instabilities in dusty non-isothermal proto-planetary discs

Authors: Marius Lehmann, Min-Kai Lin

Abstract: Protoplanetary discs (PPDs) can host a number of instabilities that may partake directly or indirectly in the process of planetesimal formation. These include the Vertical Shear Instability (VSI), Convective Overstability (COS), Streaming Instability (SI), and Dust Settling Instability (DSI), to name a few. Notably, the VSI and COS have mostly been studied in purely gaseous discs, while the SI and… ▽ More Protoplanetary discs (PPDs) can host a number of instabilities that may partake directly or indirectly in the process of planetesimal formation. These include the Vertical Shear Instability (VSI), Convective Overstability (COS), Streaming Instability (SI), and Dust Settling Instability (DSI), to name a few. Notably, the VSI and COS have mostly been studied in purely gaseous discs, while the SI and DSI have only been analyzed in isothermal discs. How these instabilities operate under more general conditions is therefore unclear. To this end, we devise a local model of a PPD describing a non-isothermal gas interacting with a single species of dust via drag forces. Using this, we find that dust drag sets minimum length scales below which the VSI and COS are suppressed. Similarly, we find that the SI can be suppressed on sufficiently small scales by the gas' radial buoyancy if it cools on roughly a dynamical timescale. We show that the DSI can be effectively stabilized by vertical buoyancy, except at special radial and vertical length scales. We also find novel instabilities unique to a dusty, non-isothermal gas. These result in a dusty analog of the COS that operates in slowly cooled discs, and a dusty version of the VSI that is strongly enhanced by dust settling. We briefly discuss the possible implications of our results on planetesimal formation. △ Less

Submitted 3 May, 2023; originally announced May 2023.

Comments: 40 pages, 26 figures

Impact of Local Pressure Enhancements on Dust Concentration inTurbulent Protoplanetary Discs

Authors: Marius Lehmann, Min-Kai Lin

Abstract: We investigate the evolution of dust and gas in the vicinity of local pressure enhancements (pressure bumps) in a protoplanetary disc (PPD) with turbulence due to the Vertical Shear Instability (VSI). We perform global 2D axisymmetric and 3D simulations of dust and gas for a range of values for Z (ratio of dust-to-gas (d/g) surface mass densities or metallicity), particle Stokes numbers tau, and p… ▽ More We investigate the evolution of dust and gas in the vicinity of local pressure enhancements (pressure bumps) in a protoplanetary disc (PPD) with turbulence due to the Vertical Shear Instability (VSI). We perform global 2D axisymmetric and 3D simulations of dust and gas for a range of values for Z (ratio of dust-to-gas (d/g) surface mass densities or metallicity), particle Stokes numbers tau, and pressure bump amplitude A. Dust feedback onto the gas is included. For the first time we demonstrate in global 3D simulations the collection of dust in long-lived vortices induced by the VSI. Without a pressure bump and for Z~0.01 and tau~0.01 we find that such vortices reach d/g density ratios slightly below unity in the discs mid-plane, while for Z>0.05 long-lived vortices are largely absent. In presence of a pressure bump, for Z~0.01 & tau~0.01 a dusty vortex forms reaching d/g ratios of a few times unity, such that the SI is expected to develop, before it eventually shears out into a turbulent dust ring. For Z~0.03 this occurs for tau~0.005, with a weaker, more short-lived vortex, while for larger tau only a turbulent dust ring forms. For Z>0.03 we find that the dust ring becomes increasingly axisymmetric for increasing tau and d/g ratios reach ~1 for tau>0.005. Furthermore, the disc's vertical mass flow profile is strongly affected by dust for Z>0.03, such that gas is transported inward near the mid-plane and outward at larger heights, i.e. the reversed situation compared to simulations with zero or small amounts of dust. Viscous $α$-values drop moderately as 0.001-0.0001 for increasing Z=0-0.05. Our results suggest that the VSI can play an active role in planetesimal formation through the formation of vortices for plausible values of Z and tau. Also it may provide a natural explanation for the presence/absence of asymmetries of observed dust rings in PPDs, depending on the value of Z. △ Less

Submitted 12 December, 2021; originally announced December 2021.

Journal ref: A&A 658, A156 (2022)

Resolution and accuracy of non-linear regression of PSF with artificial neural networks

Authors: Matthias Lehmann, Christian Wittpahl, Hatem Ben Zakour, Alexander Braun

Abstract: In a previous work we have demonstrated a novel numerical model for the point spread function (PSF) of an optical system that can efficiently model both experimental measurements and lens design simulations of the PSF. The novelty lies in the portability and the parameterization of this model, which allows for completely new ways to validate optical systems, which is especially interesting for mas… ▽ More In a previous work we have demonstrated a novel numerical model for the point spread function (PSF) of an optical system that can efficiently model both experimental measurements and lens design simulations of the PSF. The novelty lies in the portability and the parameterization of this model, which allows for completely new ways to validate optical systems, which is especially interesting for mass production optics like in the automotive industry, but also for ophtalmology. The numerical basis for this model is a non-linear regression of the PSF with an artificial neural network (ANN). In this work we examine two important aspects of this model: the spatial resolution and the accuracy of the model. Measurement and simulation of a PSF can have a much higher resolution then the typical pixel size used in current camera sensors, especially those for the automotive industry. We discuss the influence this has on on the topology of the ANN and the final application where the modeled PSF is actually used. Another important influence on the accuracy of the trained ANN is the error metric which is used during training. The PSF is a distinctly non-linear function, which varies strongly over field and defocus, but nonetheless exhibits strong symmetries and spatial relations. Therefore we examine different distance and similarity measures and discuss its influence on the modeling performance of the ANN. △ Less

Submitted 21 June, 2018; originally announced June 2018.

Comments: 12 pages, 9 figures, submitted and accepted for SPIE Optical Systems Design, 2018, Frankfurt, Germany. arXiv admin note: text overlap with arXiv:1801.02197

Density Waves and the Viscous Overstability in Saturn's Rings

Authors: Marius Lehmann, Juergen Schmidt, Heikki Salo

Abstract: This paper addresses resonantly forced spiral density waves in a dense planetary ring which is close to the threshold for viscous overstability. We solve numerically the hydrodynamical equations for a dense, axisymmetric thin disk in the vicinity of an inner Lindblad resonance with a perturbing satellite. The spiral shape of a density wave is taken into account through a suitable approximation of… ▽ More This paper addresses resonantly forced spiral density waves in a dense planetary ring which is close to the threshold for viscous overstability. We solve numerically the hydrodynamical equations for a dense, axisymmetric thin disk in the vicinity of an inner Lindblad resonance with a perturbing satellite. The spiral shape of a density wave is taken into account through a suitable approximation of the advective terms arising from the fluid orbital motion. This paper is a first attempt to model the co-existence of resonantly forced density waves and short-scale axisymmetric overstable wavetrains in Saturn's rings by conducting large-scale hydrodynamical integrations. These integrations reveal that the two wave types undergo complex interactions, not taken into account in existing models for the damping of density waves. In particular it is found that, depending on the relative magnitude of both wave types, the presence of viscous overstability can lead to a damping of an unstable density wave and vice versa. The damping of viscous overstability by a density wave is investigated further by employing a simplified model of an axisymmetric ring perturbed by a nearby Lindblad resonance. A linear hydrodynamic stability analysis as well as local N-body simulations of this model system are performed and support the results of our large-scale hydrodynamical integrations. △ Less

Submitted 18 October, 2018; v1 submitted 4 June, 2018; originally announced June 2018.

Journal ref: A&A 623, A121 (2019)

Viscous Overstability in Saturn's Rings: Influence of Collective Self-gravity

Authors: Marius Lehmann, Juergen Schmidt, Heikki Salo

Abstract: We investigate the influence of collective self-gravity forces on the nonlinear, large-scale evolution of the viscous overstability in Saturn's rings. We numerically solve the axisymmetric hydrodynamic equations in the isothermal and non-isothermal approximation, including radial self-gravity and employing transport coefficients derived by Salo et al. We assume optical depths of 1.5-2 to model Sat… ▽ More We investigate the influence of collective self-gravity forces on the nonlinear, large-scale evolution of the viscous overstability in Saturn's rings. We numerically solve the axisymmetric hydrodynamic equations in the isothermal and non-isothermal approximation, including radial self-gravity and employing transport coefficients derived by Salo et al. We assume optical depths of 1.5-2 to model Saturn's dense rings. Furthermore, local N-body simulations, incorporating vertical and radial collective self-gravity are performed. Vertical self-gravity is mimicked through an increased frequency of vertical oscillations, while radial self-gravity is approximated by solving the Poisson equation for an axisymmetric thin disk with a Fourier method. Direct particle-particle forces are omitted, which prevents small-scale gravitational instabilities (self-gravity wakes) from forming, an approximation that allows us to study long radial scales and to compare directly the hydrodynamic model and the N-body simulations. Our isothermal and non-isothermal hydrodynamic model results with vanishing self-gravity compare very well with results of Latter & Ogilvie and Rein & Latter, respectively. In contrast, for rings with radial self-gravity we find that the wavelengths of saturated overstable waves settle close to the frequency minimum of the nonlinear dispersion relation, i.e. close to a state of vanishing group velocities of the waves. Good agreement is found between non-isothermal hydrodynamics and N-body simulations for moderate and strong radial self-gravity, while the largest deviations occur for weak self-gravity. The resulting saturation wavelengths of viscous overstability for moderate and strong self-gravity (100-300m) agree reasonably well with the length scales of axisymmetric periodic micro-structure in Saturn's inner A-ring and the B-ring, as found by Cassini. △ Less

Submitted 21 April, 2018; originally announced April 2018.

Journal ref: ApJ, 851:125 (32pp), 2017

A Weakly Nonlinear Model for the Damping of Resonantly Forced Density Waves in Dense Planetary Rings

Authors: Marius Lehmann, Juergen Schmidt, Heikki Salo

Abstract: In this paper we address the stability of resonantly forced density waves in dense planetary rings. Already by Goldreich & Tremaine (1978) it has been argued that density waves might be unstable, depending on the relationship between the ring's viscosity and the surface mass density. In the recent paper Schmidt et al. (2016) we have pointed out that when - within a fluid description of the rin… ▽ More In this paper we address the stability of resonantly forced density waves in dense planetary rings. Already by Goldreich & Tremaine (1978) it has been argued that density waves might be unstable, depending on the relationship between the ring's viscosity and the surface mass density. In the recent paper Schmidt et al. (2016) we have pointed out that when - within a fluid description of the ring dynamics - the criterion for viscous overstability is satisfied, forced spiral density waves become unstable as well. In this case, linear theory fails to describe the damping, but nonlinearity of the underlying equations guarantees a finite amplitude and eventually a damping of the wave. We apply the multiple scale formalism to derive a weakly nonlinear damping relation from a hydrodynamical model. This relation describes the resonant excitation and nonlinear viscous damping of spiral density waves in a vertically integrated fluid disk with density dependent transport coefficients. The model consistently predicts density waves to be (linearly) unstable in a ring region where the conditions for viscous overstability are met. Sufficiently far away from the Lindblad resonance, the surface mass density perturbation is predicted to saturate to a constant value due to nonlinear viscous damping. The wave's damping lengths of the model depend on certain input parameters, such as the distance to the threshold for viscous overstability in parameter space and the ground state surface mass density. △ Less

Submitted 20 April, 2018; originally announced April 2018.

Journal ref: ApJ, 829:75, 22pp, 2016

Realistic Image Degradation with Measured PSF

Authors: Christian Wittpahl, Hatem Ben Zakour, Matthias Lehmann, Alexander Braun

Abstract: Training autonomous vehicles requires lots of driving sequences in all situations\cite{zhao2016}. Typically a simulation environment (software-in-the-loop, SiL) accompanies real-world test drives to systematically vary environmental parameters. A missing piece in the optical model of those SiL simulations is the sharpness, given in linear system theory by the point-spread function (PSF) of the opt… ▽ More Training autonomous vehicles requires lots of driving sequences in all situations\cite{zhao2016}. Typically a simulation environment (software-in-the-loop, SiL) accompanies real-world test drives to systematically vary environmental parameters. A missing piece in the optical model of those SiL simulations is the sharpness, given in linear system theory by the point-spread function (PSF) of the optical system. We present a novel numerical model for the PSF of an optical system that can efficiently model both experimental measurements and lens design simulations of the PSF. The numerical basis for this model is a non-linear regression of the PSF with an artificial neural network (ANN). The novelty lies in the portability and the parameterization of this model, which allows to apply this model in basically any conceivable optical simulation scenario, e.g. inserting a measured lens into a computer game to train autonomous vehicles. We present a lens measurement series, yielding a numerical function for the PSF that depends only on the parameters defocus, field and azimuth. By convolving existing images and videos with this PSF model we apply the measured lens as a transfer function, therefore generating an image as if it were seen with the measured lens itself. Applications of this method are in any optical scenario, but we focus on the context of autonomous driving, where quality of the detection algorithms depends directly on the optical quality of the used camera system. With the parameterization of the optical model we present a method to validate the functional and safety limits of camera-based ADAS based on the real, measured lens actually used in the product. △ Less

Submitted 7 January, 2018; originally announced January 2018.

Comments: 5 pages, 12 figures, submitted and accepted for IS&T Electronic Imaging, Autonomous Vehicles and Machines 2018