-
Scaling slowly rotating asteroids by stellar occultations
Authors:
A. Marciniak,
J. Ďurech,
A. Choukroun,
J. Hanuš,
W. Ogłoza,
R. Szakáts,
L. Molnár,
A. Pál,
F. Monteiro,
E. Frappa,
W. Beisker,
H. Pavlov,
J. Moore,
R. Adomavičienė,
R. Aikawa,
S. Andersson,
P. Antonini,
Y. Argentin,
A. Asai,
P. Assoignon,
J. Barton,
P. Baruffetti,
K. L. Bath,
R. Behrend,
L. Benedyktowicz
, et al. (154 additional authors not shown)
Abstract:
As evidenced by recent survey results, majority of asteroids are slow rotators (P>12 h), but lack spin and shape models due to selection bias. This bias is skewing our overall understanding of the spins, shapes, and sizes of asteroids, as well as of their other properties. Also, diameter determinations for large (>60km) and medium-sized asteroids (between 30 and 60 km) often vary by over 30% for m…
▽ More
As evidenced by recent survey results, majority of asteroids are slow rotators (P>12 h), but lack spin and shape models due to selection bias. This bias is skewing our overall understanding of the spins, shapes, and sizes of asteroids, as well as of their other properties. Also, diameter determinations for large (>60km) and medium-sized asteroids (between 30 and 60 km) often vary by over 30% for multiple reasons.
Our long-term project is focused on a few tens of slow rotators with periods of up to 60 hours. We aim to obtain their full light curves and reconstruct their spins and shapes. We also precisely scale the models, typically with an accuracy of a few percent.
We used wide sets of dense light curves for spin and shape reconstructions via light-curve inversion. Precisely scaling them with thermal data was not possible here because of poor infrared data: large bodies are too bright for WISE mission. Therefore, we recently launched a campaign among stellar occultation observers, to scale these models and to verify the shape solutions, often allowing us to break the mirror pole ambiguity.
The presented scheme resulted in shape models for 16 slow rotators, most of them for the first time. Fitting them to stellar occultations resolved previous inconsistencies in size determinations. For around half of the targets, this fitting also allowed us to identify a clearly preferred pole solution, thus removing the ambiguity inherent to light-curve inversion. We also address the influence of the uncertainty of the shape models on the derived diameters.
Overall, our project has already provided reliable models for around 50 slow rotators. Such well-determined and scaled asteroid shapes will, e.g. constitute a solid basis for density determinations when coupled with mass information. Spin and shape models continue to fill the gaps caused by various biases.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Asteroid spin-states of a 4 Gyr collisional family
Authors:
D. Athanasopoulos,
J. Hanus,
C. Avdellidou,
R. Bonamico,
M. Delbo,
M. Conjat,
A. Ferrero,
K. Gazeas,
J. P. Rivet,
N. Sioulas,
G. van Belle,
P. Antonini,
M. Audejean,
R. Behrend,
L. Bernasconi,
J. W. Brinsfield,
S. Brouillard,
L. Brunetto,
M. Fauvaud,
S. Fauvaud,
R. González,
D. Higgins,
T. W. -S. Holoien,
G. Kobber,
R. A. Koff
, et al. (7 additional authors not shown)
Abstract:
Families of asteroids generated by the collisional fragmentation of a common parent body have been identified using clustering methods of asteroids in their proper orbital element space. An alternative method has been developed in order to identify collisional families from the correlation between the asteroid fragment sizes and their proper semi-major axis distance from the family centre (V-shape…
▽ More
Families of asteroids generated by the collisional fragmentation of a common parent body have been identified using clustering methods of asteroids in their proper orbital element space. An alternative method has been developed in order to identify collisional families from the correlation between the asteroid fragment sizes and their proper semi-major axis distance from the family centre (V-shape). This method has been shown to be effective in the cases of the very diffuse families that formed billions of years ago. We obtained photometric observations of asteroids in order to construct their rotational light curves; we combine them with the literature light curves and sparse-in-time photometry; we input these data in the light curve inversion methods to determine the shape and the spin pole of the asteroids in order to assess whether an object is prograde or retrograde. The ultimate goal is to assess whether we find an excess of retrograde asteroids on the inward side of the V-shape of a 4 Gyr asteroid family identified via the V-shape method. This excess of retrograde rotators is predicted by the theory of asteroid family evolution. We obtained the spin poles for 55 asteroids claimed to belong to a 4 Gyr collisional family of the inner main belt that consists of low-albedo asteroids. After re-evaluating the albedo and spectroscopic information, we found that nine of these asteroids are interlopers in the 4 Gyr family. Of the 46 remaining asteroids, 31 are found to be retrograde and 15 prograde. We also found that these retrograde rotators have a very low probability (1.29%) of being due to random sampling from an underlying uniform distribution of spin poles. Our results constitute corroborating evidence that the asteroids identified as members of a 4 Gyr collisional family have a common origin, thus strengthening their family membership.
△ Less
Submitted 5 October, 2022;
originally announced October 2022.
-
Asteroid phase curves using sparse Gaia DR2 data and differential dense light curves
Authors:
E. Wilawer,
D. Oszkiewicz,
A. Kryszczyńska,
A. Marciniak,
V. Shevchenko,
I. Belskaya,
T. Kwiatkowski,
P. Kankiewicz,
J. Horbowicz,
V. Kudak,
P. Kulczak,
V. Perig,
K. Sobkowiak
Abstract:
The amount of sparse asteroid photometry being gathered by both space- and ground-based surveys is growing exponentially. This large volume of data poses a computational challenge owing to both the large amount of information to be processed and the new methods needed to combine data from different sources (e.g. obtained by different techniques, in different bands, and having different random and…
▽ More
The amount of sparse asteroid photometry being gathered by both space- and ground-based surveys is growing exponentially. This large volume of data poses a computational challenge owing to both the large amount of information to be processed and the new methods needed to combine data from different sources (e.g. obtained by different techniques, in different bands, and having different random and systematic errors). The main goal of this work is to develop an algorithm capable of merging sparse and dense data sets, both relative and differential, in preparation for asteroid observations originating from, for example, Gaia, TESS, ATLAS, LSST, K2, VISTA, and many other sources. We present a novel method to obtain asteroid phase curves by combining sparse photometry and differential ground-based photometry. In the traditional approach, the latter cannot be used for phase curves. Merging those two data types allows for the extraction of phase-curve information for a growing number of objects. Our method is validated for 26 sample asteroids observed by the Gaia mission.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
Photometry and model of near-Earth asteroid 2021 DW1 from one apparition
Authors:
T. Kwiatkowski,
P. Koleńczuk,
A. Kryszczyńska,
D. Oszkiewicz,
K. Kamiński,
M. K. Kamińska,
V. Troianskyi,
B. Skiff,
N. Moskowitz,
V. Kashuba,
M. -J. Kim,
T. Kim,
S. Mottola,
T. Santana-Ros,
T. Kluwak,
L. Buzzi,
P. Bacci,
P. Birtwhistle,
R. Miles,
J. Chatelain
Abstract:
On 4 March 2021 at 9 UTC a 30-m in diameter near-Earth asteroid 2021 DW1 passed the Earth at a distance of 570000 km, reaching the maximum brightness of V=14.6 mag. We observed it photometrically from 2 March, when it was visible at V=16.5 mag, until 7 March (V=18.2 mag). During that time 2021 DW1 swept a 170 degrees long arc in the northern sky, spanning solar phase angles in the range from 36 to…
▽ More
On 4 March 2021 at 9 UTC a 30-m in diameter near-Earth asteroid 2021 DW1 passed the Earth at a distance of 570000 km, reaching the maximum brightness of V=14.6 mag. We observed it photometrically from 2 March, when it was visible at V=16.5 mag, until 7 March (V=18.2 mag). During that time 2021 DW1 swept a 170 degrees long arc in the northern sky, spanning solar phase angles in the range from 36 to 86 degrees. This made it an excellent target for physical characterisation, including spin axis and shape derivation. Convex inversion of the asteroid lightcurves gives a sidereal period of rotation P=0.013760 +/- 0.000001 h, and two solutions for the spin axis ecliptic coordinates: (A) lambda_1=57 +/- 10, beta_1=29 +/- 10, and (B) lambda_2=67 +/- 10, beta_2=-40 +/- 10. The magnitude-phase curve can be fitted with a standard H, G function with H=24.8 +/- 0.5 mag and an assumed G=0.24. The asteroid colour indices are g-i=0.79 +/- 0.01 mag, and i-z=0.01 +/- 0.02 mag which indicates an S taxonomic class, with an average geometric albedo p_V=0.23 +/- 0.02. The asteroid effective diameter, derived from H and p_V, is D=30 +/- 10 m. It was found that the inclination of the spin axis of 2021 DW1 is not perpendicular to the orbital plane (obliquity epsilon=54 +/- 10 or epsilon=123 +/- 10). More spin axes of VSAs should be determined to check, if 2021 DW1 is an exception or a typical case.
△ Less
Submitted 23 September, 2021;
originally announced September 2021.
-
(216) Kleopatra, a low density critically rotating M-type asteroid
Authors:
F. Marchis,
L. Jorda,
P. Vernazza,
M. Brož,
J. Hanuš,
M. Ferrais,
F. Vachier,
N. Rambaux,
M. Marsset,
M. Viikinkoski,
E. Jehin,
S. Benseguane,
E. Podlewska-Gaca,
B. Carry,
A. Drouard,
S. Fauvaud,
M. Birlan,
J. Berthier,
P. Bartczak,
C. Dumas,
G. Dudzinski,
J. Durech,
J. Castillo-Rogez,
F. Cipriani,
F. Colas
, et al. (14 additional authors not shown)
Abstract:
Context. The recent estimates of the 3D shape of the M/Xe-type triple asteroid system (216) Kleopatra indicated a density of 5 g.cm$^{-3}$. Such a high density implies a high metal content and a low porosity which is not easy to reconcile with its peculiar dumbbell shape. Aims. Given the unprecedented angular resolution of the VLT/SPHERE/ZIMPOL camera, we aim to constrain the mass and the shape of…
▽ More
Context. The recent estimates of the 3D shape of the M/Xe-type triple asteroid system (216) Kleopatra indicated a density of 5 g.cm$^{-3}$. Such a high density implies a high metal content and a low porosity which is not easy to reconcile with its peculiar dumbbell shape. Aims. Given the unprecedented angular resolution of the VLT/SPHERE/ZIMPOL camera, we aim to constrain the mass and the shape of Kleopatra with high accuracy, hence its density. Methods. We combined our new VLT/SPHERE observations of Kleopatra recorded in 2017 and 2018 with archival data, as well as lightcurve, occultation, and delay-Doppler images, to derive its 3D shape model using two different algorithms (ADAM, MPCD). Furthermore, an N-body dynamical model allowed us to retrieve the orbital elements of the two moons as explained in the accompanying paper. Results. The shape of Kleopatra is very close to an equilibrium dumbbell figure with two lobes and a thick neck. Its volume equivalent diameter (118.75$\pm$1.40) km and mass (2.97$\pm$0.32) 10$^{18}$ kg imply a bulk density of (3.38$\pm$0.50) g cm$^{-3}$. Such a low density for a supposedly metal-rich body indicates a substantial porosity within the primary. This porous structure along with its near-equilibrium shape is compatible with a formation scenario including a giant impact followed by reaccumulation. Kleopatra's current rotation period and dumbbell shape imply that it is in a critically rotating state. The low effective gravity along the equator of the body, together with the equatorial orbits of the moons and possibly rubble-pile structure, opens the possibility that the moons formed via mass shedding. Conclusions. Kleopatra is a puzzling multiple system due to the unique characteristics of the primary. It deserves particular attention in the future, with the Extremely Large Telescopes and possibly a dedicated space mission.
△ Less
Submitted 16 August, 2021;
originally announced August 2021.
-
An advanced multipole model for (216) Kleopatra triple system
Authors:
M. Brož,
F. Marchis,
L. Jorda,
J. Hanuš,
P. Vernazza,
M. Ferrais,
F. Vachier,
N. Rambaux,
M. Marsset,
M. Viikinkoski,
E. Jehin,
S. Benseguane,
E. Podlewska-Gaca,
B. Carry,
A. Drouard,
S. Fauvaud,
M. Birlan,
J. Berthier,
P. Bartczak,
C. Dumas,
G. Dudziński,
J. Ďurech,
J. Castillo-Rogez,
F. Cipriani,
F. Colas
, et al. (15 additional authors not shown)
Abstract:
To interpret adaptive-optics observations of (216) Kleopatra, we need to describe an evolution of multiple moons, orbiting an extremely irregular body and including their mutual interactions. Such orbits are generally non-Keplerian and orbital elements are not constants. Consequently, we use a modified $N$-body integrator, which was significantly extended to include the multipole expansion of the…
▽ More
To interpret adaptive-optics observations of (216) Kleopatra, we need to describe an evolution of multiple moons, orbiting an extremely irregular body and including their mutual interactions. Such orbits are generally non-Keplerian and orbital elements are not constants. Consequently, we use a modified $N$-body integrator, which was significantly extended to include the multipole expansion of the gravitational field up to the order $\ell = 10$. Its convergence was verified against the `brute-force' algorithm. We computed the coefficients $C_{\ell m},S_{\!\ell m}$ for Kleopatra's shape, assuming a~constant bulk density. For solar-system applications, it was also necessary to implement a variable distance and geometry of observations. Our $χ^2$ metric then accounts for the absolute astrometry, the relative astrometry (2nd moon with respect to 1st), angular velocities, and also silhouettes, constraining the pole orientation. This allowed us to derive the orbital elements of Kleopatra's two moons. Using both archival astrometric data and new VLT/SPHERE observations (ESO LP 199.C-0074), we were able to identify the true periods of the moons, $P_1 = (1.822359\pm0.004156)\,{\rm d}$, $P_2 = (2.745820\pm0.004820)\,{\rm d}$. They orbit very close to the 3:2 mean-motion resonance, but their osculating eccentricities are too small compared to other perturbations (multipole, mutual), so that regular librations of the critical argument are not present. The resulting mass of Kleopatra, $m_1 = (1.49\pm0.16)\cdot10^{-12}\,M_\odot$ or $2.97\cdot10^{18}\,{\rm kg}$, is significantly lower than previously thought. An implication explained in the accompanying paper (Marchis et al.) is that (216) Kleopatra is a critically rotating body.
△ Less
Submitted 19 May, 2021;
originally announced May 2021.
-
Evidence for differentiation of the most primitive small bodies
Authors:
B. Carry,
P. Vernazza,
F. Vachier,
M. Neveu,
J. Berthier J. Hanus,
M. Ferrais,
L. Jorda,
M. Marsset,
M. Viikinkoski,
P. Bartczak,
R. Behrend,
Z. Benkhaldoun,
M. Birlan,
J. Castillo-Rogez,
F. Cipriani,
F. Colas,
A. Drouard,
G. P. Dudzinski,
J. Desmars,
C. Dumas,
J. Durech,
R. Fetick,
T. Fusco,
J. Grice,
E. Jehin
, et al. (18 additional authors not shown)
Abstract:
Dynamical models of Solar System evolution have suggested that P-/D-type volatile-rich asteroids formed in the outer Solar System and may be genetically related to the Jupiter Trojans, the comets and small KBOs. Indeed, their spectral properties resemble that of anhydrous cometary dust. High-angular-resolution images of P-type asteroid (87) Sylvia with VLT/SPHERE were used to reconstruct its 3D sh…
▽ More
Dynamical models of Solar System evolution have suggested that P-/D-type volatile-rich asteroids formed in the outer Solar System and may be genetically related to the Jupiter Trojans, the comets and small KBOs. Indeed, their spectral properties resemble that of anhydrous cometary dust. High-angular-resolution images of P-type asteroid (87) Sylvia with VLT/SPHERE were used to reconstruct its 3D shape, and to study the dynamics of its two satellites. We also model Sylvia's thermal evolution. The shape of Sylvia appears flattened and elongated. We derive a volume-equivalent diameter of 271 +/- 5 km, and a low density of 1378 +/- 45 kg.m-3. The two satellites orbit Sylvia on circular, equatorial orbits. The oblateness of Sylvia should imply a detectable nodal precession which contrasts with the fully-Keplerian dynamics of the satellites. This reveals an inhomogeneous internal structure, suggesting that Sylvia is differentiated. Sylvia's low density and differentiated interior can be explained by partial melting and mass redistribution through water percolation. The outer shell would be composed of material similar to interplanetary dust particles (IDPs) and the core similar to aqueously altered IDPs or carbonaceous chondrite meteorites such as the Tagish Lake meteorite. Numerical simulations of the thermal evolution of Sylvia show that for a body of such size, partial melting was unavoidable due to the decay of long-lived radionuclides. In addition, we show that bodies as small as 130-150 km in diameter should have followed a similar thermal evolution, while smaller objects, such as comets and the KBO Arrokoth, must have remained pristine, in agreement with in situ observations of these bodies. NASA Lucy mission target (617) Patroclus (diameter~140 km) may, however, be differentiated.
△ Less
Submitted 10 March, 2021;
originally announced March 2021.
-
Binary asteroid (31) Euphrosyne: Ice-rich and nearly spherical
Authors:
B. Yang,
J. Hanus,
B. Carry,
P. Vernazza,
M. Broz,
F. Vachier,
N. Rambaux,
M. Marsset,
O. Chrenko,
P. Sevecek,
M. Viikinkoski,
E. Jehin,
M. Ferrais,
E. Podlewska Gaca,
A. Drouard,
F. Marchis,
M. Birlan,
Z. Benkhaldoun,
J. Berthier,
P. Bartczak,
C. Dumas,
G. Dudzinski,
J. Durech,
J. Castillo-Rogez,
F. Cipriani
, et al. (16 additional authors not shown)
Abstract:
Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and the Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. The goals of this adaptive-optics imaging study were threefold: to characterize the shape of Euphrosyne, to constrain…
▽ More
Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and the Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. The goals of this adaptive-optics imaging study were threefold: to characterize the shape of Euphrosyne, to constrain its density, and to search for the large craters that may be associated with the family formation event. We obtained disk-resolved images of Euphrosyne using SPHERE/ZIMPOL at ESO's 8.2-m VLT as part of our large program (ID: 199.C-0074, PI: Vernazza). We reconstructed its 3D-shape using the adam shape modeling algorithm based on the SPHERE images and the available lightcurves of this asteroid. We analyzed the dynamics of the satellite with the genoid meta-heuristic algorithm. Finally, we studied the shape of Euphrosyne using hydrostatic equilibrium models. Our SPHERE observations show that Euphrosyne has a nearly spherical shape with the sphericity index of 0.9888 and its surface lacks large impact craters. Euphrosyne's diameter is 268+/-6 km, making it one of the top 10 largest main belt asteroids. We detected a satellite of Euphrosyne -- S/2019 (31) 1-- that is about 4 km across, on an circular orbit. The mass determined from the orbit of the satellite together with the volume computed from the shape model imply a density of 1665+/-242 kg/m^3, suggesting that Euphrosyne probably contain a large fraction of water ice in its interior. We find that the spherical shape of Euphrosyne is a result of the reaccumulation process following the impact, as in the case of (10) Hygiea. However, our shape analysis reveals that, contrary to Hygiea, the axis ratios of Euphrosyne significantly differ from the ones suggested by fluid hydrostatic equilibrium following reaccumulation.
△ Less
Submitted 15 July, 2020;
originally announced July 2020.
-
(704) Interamnia: A transitional object between a dwarf planet and a typical irregular-shaped minor body
Authors:
J. Hanuš,
P. Vernazza,
M. Viikinkoski,
M. Ferrais,
N. Rambaux,
E. Podlewska-Gaca,
A. Drouard,
L. Jorda,
E. Jehin,
B. Carry,
M. Marsset,
F. Marchis,
B. Warner,
R. Behrend,
V. Asenjo,
N. Berger,
M. Bronikowska,
T. Brothers,
S. Charbonnel,
C. Colazo,
J-F. Coliac,
R. Duffard,
A. Jones,
A. Leroy,
A. Marciniak
, et al. (34 additional authors not shown)
Abstract:
With an estimated diameter in the 320 to 350 km range, (704) Interamnia is the fifth largest main belt asteroid and one of the few bodies that fills the gap in size between the four largest bodies with $D$ > 400 km (Ceres, Vesta, Pallas and Hygiea) and the numerous smaller bodies with $D$ $\lesssim$ 200 km. However, despite its large size, little is known about the shape and spin state of Interamn…
▽ More
With an estimated diameter in the 320 to 350 km range, (704) Interamnia is the fifth largest main belt asteroid and one of the few bodies that fills the gap in size between the four largest bodies with $D$ > 400 km (Ceres, Vesta, Pallas and Hygiea) and the numerous smaller bodies with $D$ $\lesssim$ 200 km. However, despite its large size, little is known about the shape and spin state of Interamnia and, therefore, about its bulk composition and past collisional evolution. We aimed to test at what size and mass the shape of a small body departs from a nearly ellipsoidal equilibrium shape (as observed in the case of the four largest asteroids) to an irregular shape as routinely observed in the case of smaller ($D$ $\lesssim$ 200 km) bodies. We observed Interamnia as part of our ESO VLT/SPHERE large program (ID: 199.C-0074) at thirteen different epochs. In addition, several new optical lightcurves were recorded. These data, along with stellar occultation data from the literature, were fed to the All-Data Asteroid Modeling (ADAM) algorithm to reconstruct the 3D-shape model of Interamnia and to determine its spin state. Interamnia's volume-equivalent diameter of 332 $\pm$ 6 km implies a bulk density of $ρ$=1.98 $\pm$ 0.68 gcm$^{-3}$ , which suggests that Interamnia - like Ceres and Hygiea - contains a high fraction of water ice, consistent with the paucity of apparent craters. Our observations reveal a shape that can be well approximated by an ellipsoid, and that is compatible with a fluid hydrostatic equilibrium at the 2 $σ$ level. The rather regular shape of Interamnia implies that the size and mass limit, under which the shapes of minor bodies with a high amount of water ice in the subsurface become irregular, has to be searched among smaller ($D$ $\lesssim$ 300km) less massive ($m$ $\lesssim$ 3x10$^{19}$ kg) bodies.
△ Less
Submitted 18 December, 2019; v1 submitted 29 November, 2019;
originally announced November 2019.
-
A new non-convex model of the binary asteroid (809) Lundia obtained with the SAGE modelling technique
Authors:
P. Bartczak,
A. Kryszczyńska,
G. Dudziński,
M. Polińska,
F. Colas,
F. Vachier,
A. Marciniak,
J. Pollock,
G. Apostolovska,
T. Santana-Ros,
R. Hirsch,
W. Dimitrow,
M. Murawiecka,
P. Wietrzycka,
J. Nadolny
Abstract:
We present a new non-convex model of the binary asteroid (809) Lundia. A SAGE (Shaping Asteroids with Genetic Evolution) method using disc-integrated photometry only was used for deriving physical parameters of this binary system. The model of (809) Lundia improves former system's pole solution and gives the ecliptic coordinates of the orbit pole - $λ=122^{\circ}$, $β=22^{\circ}$,…
▽ More
We present a new non-convex model of the binary asteroid (809) Lundia. A SAGE (Shaping Asteroids with Genetic Evolution) method using disc-integrated photometry only was used for deriving physical parameters of this binary system. The model of (809) Lundia improves former system's pole solution and gives the ecliptic coordinates of the orbit pole - $λ=122^{\circ}$, $β=22^{\circ}$, $σ=\pm5^{\circ}$ - and the orbital period of $15.41574 \pm 0.00001$ h. For scaling our results we used effective diameter of $D_{eff} = 9.6 \pm 1.1$ km obtained from Spitzer observations. The non-convex shape description of the components permitted a refined calculation of the components' volumes, leading to a density estimation of $2.5\pm0.2$ g/cm$^3$ and macroporosity of 13-23\%. The intermediate-scale features of the model may also offer new clues on the components' origin and evolution.
△ Less
Submitted 20 May, 2019;
originally announced May 2019.
-
The shape of (7) Iris as evidence of an ancient large impact?
Authors:
J. Hanuš,
M. Marsset,
P. Vernazza,
M. Viikinkoski,
A. Drouard,
M. Brož,
B. Carry,
R. Fetick,
F. Marchis,
L. Jorda,
T. Fusco,
M. Birlan,
T. Santana-Ros,
E. Podlewska-Gaca,
E. Jehin,
M. Ferrais,
J. Grice,
P. Bartczak,
J. Berthier,
J. Castillo-Rogez,
F. Cipriani,
F. Colas,
G. Dudzinski,
C. Dumas,
J. Ďurech
, et al. (13 additional authors not shown)
Abstract:
Asteroid (7) Iris is an ideal target for disk-resolved imaging owing to its brightness (V$\sim$7-8) and large angular size of 0.33 arcsec during its apparitions. Iris is believed to belong to the category of large unfragmented asteroids that avoided internal differentiation, implying that its current shape and topography may record the first few 100 Myr of the solar system's collisional evolution.…
▽ More
Asteroid (7) Iris is an ideal target for disk-resolved imaging owing to its brightness (V$\sim$7-8) and large angular size of 0.33 arcsec during its apparitions. Iris is believed to belong to the category of large unfragmented asteroids that avoided internal differentiation, implying that its current shape and topography may record the first few 100 Myr of the solar system's collisional evolution. We recovered information about the shape and surface topography of Iris from disk-resolved VLT/SPHERE/ZIMPOL images acquired in the frame of our ESO large program. We used the All-Data Asteroid Modeling (ADAM) shape reconstruction algorithm to model the 3D shape of Iris, using optical disk-integrated data and disk-resolved images from SPHERE as inputs. We analyzed the SPHERE images to infer the asteroid's global shape and the morphology of its main craters. We present the volume-equivalent diameter D$_{\rm eq}$=214$\pm$5 km, and bulk density $ρ$=2.7$\pm$0.3 g cm$^{-3}$ of Iris. Its shape appears to be consistent with that of an oblate spheroid with a large equatorial excavation. We identified eight putative surface features 20--40 km in diameter detected at several epochs, which we interpret as impact craters. Craters on Iris have depth-to-diameter ratios that are similar to those of analogous 10 km craters on Vesta. The bulk density of Iris is consistent with that of its meteoritic analog, namely LL ordinary chondrites. Considering the absence of a collisional family related to Iris and the number of large craters on its surface, we suggest that its equatorial depression may be the remnant of an ancient (at least 3 Gyr) impact. Iris's shape further opens the possibility that large planetesimals formed as almost perfect oblate spheroids. Finally, we attribute the difference in crater morphology between Iris and Vesta to their different surface gravities.
△ Less
Submitted 25 February, 2019;
originally announced February 2019.
-
Closing the gap between Earth-based and interplanetary mission observations: Vesta seen by VLT/SPHERE
Authors:
R. JL. Fétick,
L. Jorda,
P. Vernazza,
M. Marsset,
A. Drouard,
T. Fusco,
B. Carry,
F. Marchis,
J. Hanuš,
M. Viikinkoski,
M. Birlan,
P. Bartczak,
J. Berthier,
J. Castillo-Rogez,
F. Cipriani,
F. Colas,
G. Dudziński,
C. Dumas,
M. Ferrais,
E. Jehin,
M. Kaasalainen,
A. Kryszczynska,
P. Lamy,
H. Le Coroller,
A. Marciniak
, et al. (12 additional authors not shown)
Abstract:
Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta do…
▽ More
Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta down to a spatial resolution of approximately 20 m/pixel scale.
Aims. Here our aim was to determine how much topographic and albedo information can be retrieved from the ground with VLT/SPHERE in the case of Vesta, having a former space mission (Dawn) providing us with the ground truth that can be used as a benchmark.
Methods. We observed Vesta with VLT/SPHERE/ZIMPOL as part of our ESO large programme (ID 199.C-0074) at six different epochs, and deconvolved the collected images with a parametric point spread function (PSF). We then compared our images with synthetic views of Vesta generated from the 3D shape model of the Dawn mission, on which we projected Vesta's albedo information.
Results. We show that the deconvolution of the VLT/SPHERE images with a parametric PSF allows the retrieval of the main topographic and albedo features present across the surface of Vesta down to a spatial resolution of approximately 20-30 km. Contour extraction shows an accuracy of approximately 1 pixel (3.6 mas). The present study provides the very first quantitative estimate of the accuracy of ground-based adaptive-optics imaging observations of asteroid surfaces.
Conclusions. In the case of Vesta, the upcoming generation of 30-40m telescopes (ELT, TMT, GMT) should in principle be able to resolve all of the main features present across its surface, including the troughs and the north-south crater dichotomy, provided that they operate at the diffraction limit.
△ Less
Submitted 4 February, 2019;
originally announced February 2019.
-
The homogeneous internal structure of CM-like asteroid (41) Daphne
Authors:
B. Carry,
F. Vachier,
J. Berthier,
M. Marsset,
P. Vernazza,
J. Grice,
W. J. Merline,
E. Lagadec,
A. Fienga,
A. Conrad,
E. Podlewska-Gaca,
T. Santana-Ros,
M. Viikinkoski,
J. Hanuš,
C. Dumas,
J. D. Drummond,
P. M. Tamblyn,
C. R. Chapman,
R. Behrend,
L. Bernasconi,
P. Bartczak,
Z. Benkhaldoun,
M. Birlan,
J. Castillo-Rogez,
F. Cipriani
, et al. (26 additional authors not shown)
Abstract:
Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Tr…
▽ More
Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Travis, 2017, Sci. Adv. 3, e1602514). Aims. Here we aim to test this hypothesis by deriving the density of the CM-like asteroid (41) Daphne from detailed modeling of its shape and the orbit of its small satellite. Methods. We observed Daphne and its satellite within our imaging survey with the Very Large Telescope extreme adaptive-optics SPHERE/ZIMPOL camera (ID 199.C-0074, PI P. Vernazza) and complemented this data set with earlier Keck/NIRC2 and VLT/NACO observations. We analyzed the dynamics of the satellite with our Genoid meta-heuristic algorithm. Combining our high-angular resolution images with optical lightcurves and stellar occultations, we determine the spin period, orientation, and 3-D shape, using our ADAM shape modeling algorithm. Results. The satellite orbits Daphne on an equatorial, quasi-circular, prograde orbit, like the satellites of many other large main-belt asteroids. The shape model of Daphne reveals several large flat areas that could be large impact craters. The mass determined from this orbit combined with the volume computed from the shape model implies a density for Daphne of 1.77+/-0.26 g/cm3 (3 σ). This density is consistent with a primordial CM-like homogeneous internal structure with some level of macroporosity (~17%). Conclusions. Based on our analysis of the density of Daphne and 75 other Ch/Cgh-type asteroids gathered from the literature, we conclude that the primordial internal structure of the CM parent bodies was homogeneous.
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
(16) Psyche: A mesosiderite-like asteroid?
Authors:
M. Viikinkoski,
P. Vernazza,
J. Hanus,
H. Le Coroller,
K. Tazhenova,
B. Carry,
M. Marsset,
A. Drouard,
F. Marchis,
R. Fetick,
T. Fusco,
J. Durech,
M. Birlan,
J. Berthier,
P. Bartczak,
C. Dumas,
J. Castillo-Rogez,
F. Cipriani,
F. Colas,
M. Ferrais,
J. Grice,
E. Jehin,
L. Jorda,
M. Kaasalainen,
A. Kryszczynska
, et al. (13 additional authors not shown)
Abstract:
Asteroid (16) Psyche is the target of the NASA Psyche mission. It is considered one of the few main-belt bodies that could be an exposed proto-planetary metallic core and that would thus be related to iron meteorites. Such an association is however challenged by both its near- and mid-infrared spectral properties and the reported estimates of its density. Here, we aim to refine the density of (16)…
▽ More
Asteroid (16) Psyche is the target of the NASA Psyche mission. It is considered one of the few main-belt bodies that could be an exposed proto-planetary metallic core and that would thus be related to iron meteorites. Such an association is however challenged by both its near- and mid-infrared spectral properties and the reported estimates of its density. Here, we aim to refine the density of (16) Psyche to set further constraints on its bulk composition and determine its potential meteoritic analog.
We observed (16) Psyche with ESO VLT/SPHERE/ZIMPOL as part of our large program (ID 199.C-0074). We used the high angular resolution of these observations to refine Psyche's three-dimensional (3D) shape model and subsequently its density when combined with the most recent mass estimates. In addition, we searched for potential companions around the asteroid. We derived a bulk density of 3.99\,$\pm$\,0.26\,g$\cdot$cm$^{-3}$ for Psyche. While such density is incompatible at the 3-sigma level with any iron meteorites ($\sim$7.8\,g$\cdot$cm$^{-3}$), it appears fully consistent with that of stony-iron meteorites such as mesosiderites (density $\sim$4.25\,$\cdot$cm$^{-3}$). In addition, we found no satellite in our images and set an upper limit on the diameter of any non-detected satellite of 1460\,$\pm$\,200}\,m at 150\,km from Psyche (0.2\%\,$\times$\,R$_{Hill}$, the Hill radius) and 800\,$\pm$\,200\,m at 2,000\,km (3\%\,$\times$\,$R_{Hill}$).
Considering that the visible and near-infrared spectral properties of mesosiderites are similar to those of Psyche, there is merit to a long-published initial hypothesis that Psyche could be a plausible candidate parent body for mesosiderites.
△ Less
Submitted 5 October, 2018;
originally announced October 2018.
-
Differentiation signatures in the Flora region
Authors:
Dagmara Oszkiewicz,
Paweł Kankiewicz,
Ireneusz Włodarczyk,
Agnieszka Kryszczyńska
Abstract:
Most asteroid families are very homogeneous in physical properties. Some show greater diversity, however. The Flora family is the most intriguing of them. The Flora family is spread widely in the inner main belt, has a rich collisional history, and is one of the most taxonomically diverse regions in the main belt. As a result of its proximity to the asteroid (4) Vesta (the only currently known int…
▽ More
Most asteroid families are very homogeneous in physical properties. Some show greater diversity, however. The Flora family is the most intriguing of them. The Flora family is spread widely in the inner main belt, has a rich collisional history, and is one of the most taxonomically diverse regions in the main belt. As a result of its proximity to the asteroid (4) Vesta (the only currently known intact differentiated asteroid) and its family, migration between the two regions is possible. This dynamical path is one of the counter arguments to the hypothesis that there may be traces of a differentiated parent body other than Vesta in the inner main belt region. We here investigate the possibility that some of the V- and A- types (commonly interpreted as basaltoids and dunites - parts of the mantle and crust of differentiated parent bodies) in the Flora dynamical region are not dynamically connected to Vesta.
△ Less
Submitted 3 October, 2015;
originally announced October 2015.
-
The non-convex shape of (234) Barbara, the first Barbarian
Authors:
P. Tanga,
B. Carry,
F. Colas,
M. Delbo,
A. Matter,
J. Hanus,
V. Ali Lagoa,
A. H. Andrei,
M. Assafin,
M. Audejean,
R. Behrend,
J. I. B. Camargo,
A. Carbognani,
M. Cedres Reyes,
M. Conjat,
N. Cornero,
D. Coward,
R. Crippa,
E. de Ferra Fantin,
M. Devogele,
G. Dubos,
E. Frappa,
M. Gillon,
H. Hamanowa,
E. Jehin
, et al. (15 additional authors not shown)
Abstract:
Asteroid (234) Barbara is the prototype of a category of asteroids that has been shown to be extremely rich in refractory inclusions, the oldest material ever found in the Solar System. It exhibits several peculiar features, most notably its polarimetric behavior. In recent years other objects sharing the same property (collectively known as "Barbarians") have been discovered. Interferometric obse…
▽ More
Asteroid (234) Barbara is the prototype of a category of asteroids that has been shown to be extremely rich in refractory inclusions, the oldest material ever found in the Solar System. It exhibits several peculiar features, most notably its polarimetric behavior. In recent years other objects sharing the same property (collectively known as "Barbarians") have been discovered. Interferometric observations in the mid-infrared with the ESO VLTI suggested that (234) Barbara might have a bi-lobated shape or even a large companion satellite. We use a large set of 57 optical lightcurves acquired between 1979 and 2014, together with the timings of two stellar occultations in 2009, to determine the rotation period, spin-vector coordinates, and 3-D shape of (234) Barbara, using two different shape reconstruction algorithms. By using the lightcurves combined to the results obtained from stellar occultations, we are able to show that the shape of (234) Barbara exhibits large concave areas. Possible links of the shape to the polarimetric properties and the object evolution are discussed. We also show that VLTI data can be modeled without the presence of a satellite.
△ Less
Submitted 2 February, 2015;
originally announced February 2015.
-
Asteroids' physical models from combined dense and sparse photometry and scaling of the YORP effect by the observed obliquity distribution
Authors:
J. Hanuš,
J. Ďurech,
M. Brož,
A. Marciniak,
B. D. Warner,
F. Pilcher,
R. Stephens,
R. Behrend,
B. Carry,
D. Čapek,
P. Antonini,
M. Audejean,
K. Augustesen,
E. Barbotin,
P. Baudouin,
A. Bayol,
L. Bernasconi,
W. Borczyk,
J. -G. Bosch,
E. Brochard,
L. Brunetto,
S. Casulli,
A. Cazenave,
S. Charbonnel,
B. Christophe
, et al. (95 additional authors not shown)
Abstract:
The larger number of models of asteroid shapes and their rotational states derived by the lightcurve inversion give us better insight into both the nature of individual objects and the whole asteroid population. With a larger statistical sample we can study the physical properties of asteroid populations, such as main-belt asteroids or individual asteroid families, in more detail. Shape models can…
▽ More
The larger number of models of asteroid shapes and their rotational states derived by the lightcurve inversion give us better insight into both the nature of individual objects and the whole asteroid population. With a larger statistical sample we can study the physical properties of asteroid populations, such as main-belt asteroids or individual asteroid families, in more detail. Shape models can also be used in combination with other types of observational data (IR, adaptive optics images, stellar occultations), e.g., to determine sizes and thermal properties. We use all available photometric data of asteroids to derive their physical models by the lightcurve inversion method and compare the observed pole latitude distributions of all asteroids with known convex shape models with the simulated pole latitude distributions. We used classical dense photometric lightcurves from several sources and sparse-in-time photometry from the U.S. Naval Observatory in Flagstaff, Catalina Sky Survey, and La Palma surveys (IAU codes 689, 703, 950) in the lightcurve inversion method to determine asteroid convex models and their rotational states. We also extended a simple dynamical model for the spin evolution of asteroids used in our previous paper. We present 119 new asteroid models derived from combined dense and sparse-in-time photometry. We discuss the reliability of asteroid shape models derived only from Catalina Sky Survey data (IAU code 703) and present 20 such models. By using different values for a scaling parameter cYORP (corresponds to the magnitude of the YORP momentum) in the dynamical model for the spin evolution and by comparing synthetics and observed pole-latitude distributions, we were able to constrain the typical values of the cYORP parameter as between 0.05 and 0.6.
△ Less
Submitted 29 January, 2013;
originally announced January 2013.
-
Physical properties of ESA Rosetta target asteroid (21) Lutetia: Shape and flyby geometry
Authors:
B. Carry,
M. Kaasalainen,
C. Leyrat,
W. J. Merline,
J. D. Drummond,
A. Conrad,
H. A. Weaver,
P. M. Tamblyn,
C. R. Chapman,
C. Dumas,
F. Colas,
J. C. Christou,
E. Dotto,
D. Perna,
S. Fornasier,
L. Bernasconi,
R. Behrend,
F. Vachier,
A. Kryszczynska,
M. Polinska,
M. Fulchignoni,
R. Roy,
R. Naves,
R. Poncy,
P. Wiggins
Abstract:
Aims. We determine the physical properties (spin state and shape) of asteroid (21) Lutetia, target of the ESA Rosetta mission, to help in preparing for observations during the flyby on 2010 July 10 by predicting the orientation of Lutetia as seen from Rosetta.
Methods. We use our novel KOALA inversion algorithm to determine the physical properties of asteroids from a combination of optical light…
▽ More
Aims. We determine the physical properties (spin state and shape) of asteroid (21) Lutetia, target of the ESA Rosetta mission, to help in preparing for observations during the flyby on 2010 July 10 by predicting the orientation of Lutetia as seen from Rosetta.
Methods. We use our novel KOALA inversion algorithm to determine the physical properties of asteroids from a combination of optical lightcurves, disk-resolved images, and stellar occultations, although the latter are not available for (21) Lutetia.
Results. We find the spin axis of (21) Lutetia to lie within 5 degrees of (λ = 52 deg., β = -6 deg.) in Ecliptic J2000 reference frame (equatorial α = 52 deg., δ = +12 deg.), and determine an improved sidereal period of 8.168 270 \pm 0.000 001 h. This pole solution implies the southern hemisphere of Lutetia will be in "seasonal" shadow at the time of the flyby. The apparent cross-section of Lutetia is triangular as seen "pole-on" and more rectangular as seen "equator-on". The best-fit model suggests the presence of several concavities. The largest of these is close to the north pole and may be associated with large impacts.
△ Less
Submitted 17 June, 2010; v1 submitted 28 May, 2010;
originally announced May 2010.
-
New determination of the size and bulk density of the binary asteroid 22 Kalliope from observations of mutual eclipses
Authors:
P. Descamps,
F. Marchis,
J. Pollock,
J. Berthier,
F. Vachier,
M. Birlan,
M. Kaasalainen,
A. W. Harris,
M. Wong,
W. Romanishin,
E. M. Cooper,
K. A. Kettner,
P. Wiggins,
A. Kryszczynska,
M. Polinska,
J. -F. Colliac,
A. Devyatkin,
I. Verestchagina,
D. Gorshanov
Abstract:
In 2007, the M-type binary asteroid 22 Kalliope reached one of its annual equinoxes. As a consequence, the orbit plane of its small moon, Linus, was aligned closely to the Sun's line of sight, giving rise to a mutual eclipse season. A dedicated international campaign of photometric observations, based on amateur-professional collaboration, was organized and coordinated by the IMCCE in order to c…
▽ More
In 2007, the M-type binary asteroid 22 Kalliope reached one of its annual equinoxes. As a consequence, the orbit plane of its small moon, Linus, was aligned closely to the Sun's line of sight, giving rise to a mutual eclipse season. A dedicated international campaign of photometric observations, based on amateur-professional collaboration, was organized and coordinated by the IMCCE in order to catch several of these events. The set of the compiled observations is released in this work. We developed a relevant model of these events, including a topographic shape model of Kalliope refined in the present work, the orbit solution of Linus as well as the photometric effect of the shadow of one component falling on the other. By fitting this model to the only two full recorded events, we derived a new estimation of the equivalent diameter of Kalliope of 166.2+/-2.8km, 8% smaller than its IRAS diameter. As to the diameter of Linus, considered as purely spherical, it is estimated to 28+/-2 km. This substantial "shortening" of Kalliope gives a bulk density of 3.35+/-0.33g/cm3, significantly higher than past determinations but more consistent with its taxonomic type. Some constraints can be inferred on the composition.
△ Less
Submitted 13 March, 2008; v1 submitted 8 October, 2007;
originally announced October 2007.
