Spectroscopy using a visible photonic lantern at the Subaru telescope: Laboratory characterization and first on-sky demonstration on Ikiiki (α Leo) and `Aua (α Ori)
Authors:
Sébastien Vievard,
Manon Lallement,
Sergio Leon-Saval,
Olivier Guyon,
Nemanja Jovanovic,
Elsa Huby,
Sylvestre Lacour,
Julien Lozi,
Vincent Deo,
Kyohoon Ahn,
Miles Lucas,
Steph Sallum,
Barnaby Norris,
Chris Betters,
Rodrygo Amezcua-Correa,
Stephanos Yerolatsitis,
Michael Fitzgerald,
Jon Lin,
Yoo Jung Kim,
Pradip Gatkine,
Takayuki Kotani,
Motohide Tamura,
Thayne Currie,
Harry-Dean Kenchington,
Guillermo Martin
, et al. (1 additional authors not shown)
Abstract:
Photonic lanterns are waveguide devices enabling high throughput single mode spectroscopy and high angular resolution. We aim to present the first on-sky demonstration of a photonic lantern (PL) operating in visible light, to measure its throughput and assess its potential for high-resolution spectroscopy of compact objects. We used the SCExAO instrument (a double stage extreme AO system installed…
▽ More
Photonic lanterns are waveguide devices enabling high throughput single mode spectroscopy and high angular resolution. We aim to present the first on-sky demonstration of a photonic lantern (PL) operating in visible light, to measure its throughput and assess its potential for high-resolution spectroscopy of compact objects. We used the SCExAO instrument (a double stage extreme AO system installed at the Subaru telescope) and FIRST mid-resolution spectrograph (R 3000) to test the visible capabilities of the PL on internal source and on-sky observations. The best averaged coupling efficiency over the PL field of view was measured at 51% +/- 10% with a peak at 80%. We also investigate the relationship between coupling efficiency and the Strehl ratio for a PL, comparing them with those of a single-mode fiber (SMF). Findings show that in the AO regime, a PL offers better coupling efficiency performance than a SMF, especially in the presence of low spatial frequency aberrations. We observed Ikiiki (alpha Leo - mR = 1.37) and `Aua (alpha Ori - mR = -1.17) at a frame rate of 200 Hz. Under median seeing conditions (about 1 arcsec measured in H band) and large tip/tilt residuals (over 20 mas), we estimated an average light coupling efficiency of 14.5% +/- 7.4%, with a maximum of 42.8% at 680 nm. We were able to reconstruct both star's spectra, containing various absorption lines. The successful demonstration of this device opens new possibilities in terms of high throughput single-mode fiber-fed spectroscopy in the Visible. The demonstrated on-sky coupling efficiency performance would not have been achievable with a single SMF injection setup under similar conditions, partly because the residual tip/tilt alone exceeded the field of view of a visible SMF (18 mas at 700 nm). Thus emphasizing the enhanced resilience of PL technology to such atmospheric disturbances. The additional
△ Less
Submitted 14 November, 2024; v1 submitted 10 September, 2024;
originally announced September 2024.
L-band nulling interferometry at the VLTI with Asgard/Hi-5: status and plans
Authors:
Denis Defrère,
Azzurra Bigioli,
Colin Dandumont,
Germain Garreau,
Romain Laugier,
Marc-Antoine Martinod,
Olivier Absil,
Jean-Philippe Berger,
Emilie Bouzerand,
Benjamin Courtney-Barrer,
Alexandre Emsenhuber,
Steve Ertel,
Jonathan Gagne,
Adrian M. Glauser,
Simon Gross,
Michael J. Ireland,
Harry-Dean Kenchington,
Jacques Kluska,
Stefan Kraus,
Lucas Labadie,
Viktor Laborde,
Alain Leger,
Jarron Leisenring,
Jérôme Loicq,
Guillermo Martin
, et al. (12 additional authors not shown)
Abstract:
Hi-5 is the L'-band (3.5-4.0 $μ$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outp…
▽ More
Hi-5 is the L'-band (3.5-4.0 $μ$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outputs and simultaneous photometric outputs for self-calibration purposes. In this paper, we present an update of the project with a particular focus on the overall architecture, opto-mechanical design of the warm and cold optics, injection system, and development of the photonic beam combiner. The key science projects are to survey (i) nearby young planetary systems near the snow line, where most giant planets are expected to be formed, and (ii) nearby main sequence stars near the habitable zone where exozodiacal dust that may hinder the detection of Earth-like planets. We present an update of the expected instrumental performance based on full end-to-end simulations using the new GRAVITY+ specifications of the VLTI and the latest planet formation models.
△ Less
Submitted 18 August, 2022;
originally announced August 2022.
