Showing 1–24 of 24 results for author: Karampelas, K

Spectra of standing kink waves in loops and the effects of the lower solar atmosphere

Authors: Konstantinos Karampelas, Daye Lim, Tom Van Doorsselaere, Yuhang Gao

Abstract: Understanding the effects of the lower solar atmosphere on the spectrum of standing kink oscillations of coronal loops, in both the decaying and decayless regime, is essential for developing more advanced tools for coronal seismology. We aim to reveal the effects of the chromosphere on the spatial profiles and frequencies of the standing kink modes, create synthetic emission maps to compare with o… ▽ More Understanding the effects of the lower solar atmosphere on the spectrum of standing kink oscillations of coronal loops, in both the decaying and decayless regime, is essential for developing more advanced tools for coronal seismology. We aim to reveal the effects of the chromosphere on the spatial profiles and frequencies of the standing kink modes, create synthetic emission maps to compare with observations, and study the results using spatial and temporal coronal seismology techniques. We excited transverse oscillations in a 3D straight flux tube using (a) a broadband footpoint driver, (b) a sinusoidal velocity pulse, and (c) an off-centre Gaussian velocity pulse, using the PLUTO code. The flux tube is gravitationally stratified, with footpoints embedded in chromospheric plasma. Using the FoMo code, we created synthetic observations of our data in the Fe IX 17.1 nm line and calculated the spectra with the Auto-NUWT code. We also numerically solved the generalised eigenvalue system for the 1D wave equation to determine the effects of the stratification on the kink modes of our system. The synthetic observations of the loops perturbed by the velocity pulses show a single dominant mode that our 1D analysis reveals to be the third harmonic of the system. For the broadband driver, the synthetic emission shows multiple frequency bands, associated with both the loop and the driver. Finally, using seismological techniques, we highlight the possibility of misidentifying the observed third, sixth, and ninth harmonics with the first, second, and third harmonics of the coronal part of longer loops. Unless more advanced techniques of spatial seismology are used with many data points from observations along the entire loop length, this misidentification can result in overestimating the mean magnetic field by a factor equal to the period ratio of the fundamental over the third harmonic. △ Less

Submitted 6 January, 2025; originally announced January 2025.

Comments: 14 pages, 9 figures, 1 appendix, accepted for publication in A&A

Measurements of the solar coronal magnetic field based on coronal seismology with propagating Alfvenic waves: forward modeling

Authors: Yuhang Gao, Hui Tian, Tom Van Doorsselaere, Zihao Yang, Mingzhe Guo, Konstantinos Karampelas

Abstract: Recent observations have demonstrated the capability of mapping the solar coronal magnetic field using the technique of coronal seismology based on the ubiquitous propagating Alfvenic/kink waves through imaging spectroscopy. We established a magnetohydrodynamic (MHD) model of a gravitationally stratified open magnetic flux tube, exciting kink waves propagating upwards along the tube. Forward model… ▽ More Recent observations have demonstrated the capability of mapping the solar coronal magnetic field using the technique of coronal seismology based on the ubiquitous propagating Alfvenic/kink waves through imaging spectroscopy. We established a magnetohydrodynamic (MHD) model of a gravitationally stratified open magnetic flux tube, exciting kink waves propagating upwards along the tube. Forward modeling was performed to synthesize the Fe XIII 1074.7 and 1079.8 nm spectral line profiles, which were then used to determine the wave phase speed, plasma density, and magnetic field with seismology method. A comparison between the seismologically inferred results and the corresponding input values verifies the reliability of the seismology method. In addition, we also identified some factors that could lead to errors during magnetic field measurements. Our results may serve as a valuable reference for current and future coronal magnetic field measurements based on observations of propagating kink waves. △ Less

Submitted 12 November, 2024; originally announced November 2024.

Comments: Accepted for publication in RAA

Propagating Kink Waves in an Open Coronal Magnetic Flux Tube with Gravitational Stratification: Magnetohydrodynamic Simulation and Forward Modelling

Authors: Yuhang Gao, Tom Van Doorsselaere, Hui Tian, Mingzhe Guo, Konstantinos Karampelas

Abstract: Context. In the coronal open-field regions, such as coronal holes, there are many transverse waves propagating along magnetic flux tubes, generally interpreted as kink waves. Previous studies have highlighted their potential in coronal heating, solar wind acceleration, and seismological diagnostics of various physical parameters. Aims. This study aims to investigate propagating kink waves, conside… ▽ More Context. In the coronal open-field regions, such as coronal holes, there are many transverse waves propagating along magnetic flux tubes, generally interpreted as kink waves. Previous studies have highlighted their potential in coronal heating, solar wind acceleration, and seismological diagnostics of various physical parameters. Aims. This study aims to investigate propagating kink waves, considering both vertical and horizontal density inhomogeneity, using three-dimensional magnetohydrodynamic (MHD) simulations. Methods. We establish a 3D MHD model of a gravitationally stratified open flux tube, incorporating a velocity driver at the lower boundary to excite propagating kink waves. Forward modelling is conducted to synthesise observational signatures of the Fe ix 17.1 nm line. Results. It is found that resonant absorption and density stratification both affect the wave amplitude. When diagnosing the relative density profile with velocity amplitude, resonant damping needs to be properly considered to avoid possible underestimation. In addition, unlike standing modes, propagating waves are believed to be Kelvin-Helmholtz stable. In the presence of vertical stratification, however, phase mixing of transverse motions around the tube boundary can still induce small scales, partially dissipating wave energy and leading to a temperature increase, especially at higher altitudes. Moreover, forward modeling is conducted to synthesise observational signatures, revealing the promising potential of future coronal imaging spectrometers such as MUSE in resolving these wave-induced signatures. Also, the synthesised intensity signals exhibit apparent periodic variations, offering a potential method to indirectly observe propagating kink waves with current EUV imagers. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Comments: accepted for publication in A&A

Journal ref: A&A 689, A195 (2024)

Kelvin-Helmholtz instability and heating in oscillating loops perturbed by power-law transverse wave drivers

Authors: Konstantinos Karampelas, Tom Van Doorsselaere, Mingzhe Guo, Timothy Duckenfield, Gabriel Pelouze

Abstract: Instabilities in oscillating loops are believed to be essential for dissipating the wave energy and heating the solar coronal plasma. Our aim is to study the development of the Kelvin-Helmholtz (KH) instability in an oscillating loop that is driven by random footpoint motions. Using the PLUTO code, we performed 3D simulations of a straight gravitationally stratified flux tube. The loop footpoints… ▽ More Instabilities in oscillating loops are believed to be essential for dissipating the wave energy and heating the solar coronal plasma. Our aim is to study the development of the Kelvin-Helmholtz (KH) instability in an oscillating loop that is driven by random footpoint motions. Using the PLUTO code, we performed 3D simulations of a straight gravitationally stratified flux tube. The loop footpoints are embedded in chromospheric plasma, in the presence of thermal conduction and an artificially broadened transition region. Using drivers with a power-law spectrum, one with a red noise spectrum and one with the low-frequency part subtracted, we excited standing oscillations and the KH instability in our loops, after one-and-a-half periods of the oscillation. We see that our broadband drivers lead to fully deformed, turbulent loop cross-sections over the entire coronal part of the loop due to the spatially extended KH instability. The low RMS velocity of our driver without the low-frequency components supports the working hypothesis that the KH instability can easily manifest in oscillating coronal loops. We report for the first time in driven transverse oscillations of loops the apparent propagation of density perturbations due to the onset of the KH instability, from the apex towards the footpoints. Both drivers input sufficient energy to drive enthalpy and mass flux fluctuations along the loop, while also causing heating near the driven footpoint of the oscillating loop, which becomes more prominent when a low-frequency component is included in the velocity driver. Finally, our power-law driver with the low-frequency component provides a RMS input Poynting flux of the same order as the radiative losses of the quiet-Sun corona, giving us promising prospects for the contribution of decayless oscillations in coronal heating. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Comments: 12 pages, 12 figures

Decayless oscillations in 3D coronal loops excited by a power-law driver

Authors: Konstantinos Karampelas, Tom Van Doorsselaere

Abstract: Aims. We studied the manifestation of decayless oscillations in 3D simulations of coronal loops, driven by random motions. Methods. Using the PLUTO code, we ran magnetohydrodynamic (MHD) simulations of a straight gravitationally stratified flux tube, with its footpoints embedded in chromospheric plasma. We consider transverse waves drivers with a horizontally polarised red noise power-law spectrum… ▽ More Aims. We studied the manifestation of decayless oscillations in 3D simulations of coronal loops, driven by random motions. Methods. Using the PLUTO code, we ran magnetohydrodynamic (MHD) simulations of a straight gravitationally stratified flux tube, with its footpoints embedded in chromospheric plasma. We consider transverse waves drivers with a horizontally polarised red noise power-law spectrum. Results. Our broadband drivers lead to the excitation of standing waves with frequencies equal to the fundamental standing kink mode and its harmonics. These standing kink oscillations have non-decaying amplitudes, and spectra that depend on the characteristics of the loops, with the latter amplifying the resonant frequencies from the drivers. We thus report for the first time in 3D simulations the manifestation of decayless oscillations from broadband drivers. The spatial and temporal evolution of our oscillation spectra reveals the manifestation of a half harmonic, which exhibits half the frequency of the identified fundamental mode with a similar spatial profile. Our results suggest that this mode is related to the presence of the transition region in our model and could be interpreted as being the equivalent to the fundamental mode of standing sound waves driven on pipes closed at one end. Conclusions. The potential existence of this half harmonic has important implications for coronal seismology, since misinterpreting it for the fundamental mode of the system can lead to false estimations of the average kink speed profile along oscillating loops. Finally, its detection could potentially give us a tool for distinguishing between different excitation and driving mechanisms of decayless oscillations in observations. △ Less

Submitted 2 January, 2024; originally announced January 2024.

Comments: 6 pages, 5 figures

Journal ref: A&A 681, L6 (2024)

Influence of the Lower Atmosphere on Wave Heating and Evaporation in Solar Coronal Loops

Authors: Mingzhe Guo, Timothy Duckenfield, Tom Van Doorsselaere, Konstantinos Karampelas, Gabriel Pelouze, Yuhang gao

Abstract: We model a coronal loop as a three-dimensional magnetic cylinder in a realistic solar atmosphere that extends from the chromosphere to the corona. Kink oscillations, believed ubiquitous in the solar corona, are launched in the loop. Heating is expected due to the dissipation of wave energy at small structures that develop from the Kelvin-Helmholtz instability induced by kink oscillations. Increase… ▽ More We model a coronal loop as a three-dimensional magnetic cylinder in a realistic solar atmosphere that extends from the chromosphere to the corona. Kink oscillations, believed ubiquitous in the solar corona, are launched in the loop. Heating is expected due to the dissipation of wave energy at small structures that develop from the Kelvin-Helmholtz instability induced by kink oscillations. Increases in temperature and internal energy can be observed in the coronal counterpart of the driven loop. With the presence of thermal conduction, chromospheric evaporation can also be seen. Although the volume averaged temperature and density changes seem slight ($\sim4\%$ relative to a non-driven loop), the enthalpy flow from the lower atmosphere redistributes the density and temperature in the vertical direction, thus enhancing the dissipation of wave energy in the corona. The efficient heating in the coronal counterpart of the loop can complement the thermal conductive losses shown in the current model and thus maintain the internal energy in the corona. △ Less

Submitted 5 May, 2023; originally announced May 2023.

Comments: Accepted for publication in ApJL

Cut-off of transverse waves through the solar transition region

Authors: Gabriel Pelouze, Tom Van Doorsselaere, Konstantinos Karampelas, Julia M. Riedl, Timothy Duckenfield

Abstract: Context. Transverse oscillations are ubiquitously observed in the solar corona, both in coronal loops and open magnetic flux tubes. Numerical simulations suggest that their dissipation could heat coronal loops, counterbalancing radiative losses. These models rely on a continuous driver at the footpoint of the loops. However, analytical works predict that transverse waves are subject to a cut-off i… ▽ More Context. Transverse oscillations are ubiquitously observed in the solar corona, both in coronal loops and open magnetic flux tubes. Numerical simulations suggest that their dissipation could heat coronal loops, counterbalancing radiative losses. These models rely on a continuous driver at the footpoint of the loops. However, analytical works predict that transverse waves are subject to a cut-off in the transition region. It is thus unclear whether they can reach the corona, and indeed heat coronal loops. Aims. Our aims are to determine how the cut-off of kink waves affects their propagation into the corona, and to characterize the variation of the cut-off frequency with altitude. Methods. Using 3D magnetohydrodynamic simulations, we modelled the propagation of kink waves in a magnetic flux tube, embedded in a realistic atmosphere with thermal conduction, that starts in the chromosphere and extends into the corona. We drove kink waves at four different frequencies, and determined whether they experienced a cut-off. We then calculated the altitude at which the waves were cut-off, and compared it to the prediction of several analytical models. Results. We show that kink waves indeed experience a cut-off in the transition region, and we identified the analytical model that gives the best predictions. In addition, we show that waves with periods shorter than approximately 500 s can still reach the corona by tunnelling through the transition region, with little to no attenuation of their amplitude. This means that such waves can still propagate from the footpoints of loop, and result in heating in the corona. △ Less

Submitted 17 January, 2023; v1 submitted 8 January, 2023; originally announced January 2023.

Comments: Accepted for publication in A&A. 8 pages, 7 figures

Journal ref: A&A 672, A105 (2023)

Oscillatory reconnection as a plasma diagnostic in the solar corona

Authors: Konstantinos Karampelas, James A. McLaughlin, Gert J. J. Botha, Stéphane Régnier

Abstract: Oscillatory reconnection is a relaxation process in magnetised plasma, with an inherent periodicity that is exclusively dependent on the properties of the background plasma. This study focuses on the seismological prospects of oscillatory reconnection in the solar corona. We perform three sets of parameter studies (for characteristic coronal values of the background magnetic field, density and tem… ▽ More Oscillatory reconnection is a relaxation process in magnetised plasma, with an inherent periodicity that is exclusively dependent on the properties of the background plasma. This study focuses on the seismological prospects of oscillatory reconnection in the solar corona. We perform three sets of parameter studies (for characteristic coronal values of the background magnetic field, density and temperature) using the PLUTO code to solve the fully compressive, resistive MHD equations for a 2D magnetic X-point. From each parameter study, we derive the period of the oscillatory reconnection. We find that this period is inversely proportional to the characteristic strength of the background magnetic field and the square root of the initial plasma temperature, while following a square root dependency upon the equilibrium plasma density. These results reveal an inverse proportionality between the magnitude of the Alfvén speed and the period, as well as the background sound speed and the period. Furthermore, we note that the addition of anisotropic thermal conduction only leads to a small increase in the mean value for the period. Finally, we establish an empirical formula that gives the value for the period in relation to the background magnetic field, density and temperature. This gives us a quantified relation for oscillatory reconnection, to be used as a plasma diagnostic in the solar corona, opening up the possibility of using oscillatory reconnection for coronal seismology. △ Less

Submitted 6 January, 2023; originally announced January 2023.

Comments: 16 pages, 10 figures, accepted for publication in ApJ

The independence of oscillatory reconnection periodicity from the initial pulse

Authors: Konstantinos Karampelas, James A. McLaughlin, Gert J. J. Botha, Stéphane Régnier

Abstract: Oscillatory reconnection can manifest through the interaction between the ubiquitous MHD waves and omnipresent null points in the solar atmosphere and is characterized by an inherent periodicity. In the current study, we focus on the relationship between the period of oscillatory reconnection and the strength of the wave pulse initially perturbing the null point, in a hot coronal plasma. We use th… ▽ More Oscillatory reconnection can manifest through the interaction between the ubiquitous MHD waves and omnipresent null points in the solar atmosphere and is characterized by an inherent periodicity. In the current study, we focus on the relationship between the period of oscillatory reconnection and the strength of the wave pulse initially perturbing the null point, in a hot coronal plasma. We use the PLUTO code to solve the fully compressive, resistive MHD equations for a 2D magnetic X-point. Using wave pulses with a wide range of amplitudes, we perform a parameter study to obtain values for the period, considering the presence and absence of anisotropic thermal conduction separately. In both cases, we find that the resulting period is independent of the strength of the initial perturbation. The addition of anisotropic thermal conduction only leads to an increase in the mean value for the period, in agreement with our previous study. We also consider a different type of initial driver and we obtain an oscillation period matching the independent trend previously mentioned. Thus, we report for the first time on the independence between the type and strength of the initializing wave pulse and the resulting period of oscillatory reconnection in a hot coronal plasma. This makes oscillatory reconnection a promising mechanism to be used within the context of coronal seismology. △ Less

Submitted 5 July, 2022; originally announced July 2022.

Comments: 19 pages, 14 figures, accepted for publication in ApJ

Oscillatory Reconnection of a 2D X-point in a hot coronal plasma

Authors: Konstantinos Karampelas, James A. McLaughlin, Gert J. J. Botha, Stéphane Régnier

Abstract: Oscillatory reconnection (a relaxation mechanism with periodic changes in connectivity) has been proposed as a potential physical mechanism underpinning several periodic phenomena in the solar atmosphere including, but not limited to, quasi-periodic pulsations (QPPs). Despite its importance, however, the mechanism has never been studied within a hot, coronal plasma. We investigate oscillatory reco… ▽ More Oscillatory reconnection (a relaxation mechanism with periodic changes in connectivity) has been proposed as a potential physical mechanism underpinning several periodic phenomena in the solar atmosphere including, but not limited to, quasi-periodic pulsations (QPPs). Despite its importance, however, the mechanism has never been studied within a hot, coronal plasma. We investigate oscillatory reconnection in a one million Kelvin plasma by solving the fully-compressive, resistive MHD equations for a 2D magnetic X-point under coronal conditions using the PLUTO code. We report on the resulting oscillatory reconnection including its periodicity and decay rate. We observe a more complicated oscillating profile for the current density compared to that found for a cold plasma, due to mode-conversion at the equipartition layer. We also consider, for the first time, the effect of adding anisotropic thermal conduction to the oscillatory reconnection mechanism, and we find this simplifies the spectrum of the oscillation profile and increases the decay rate. Crucially, the addition of thermal conduction does not prevent the oscillatory reconnection mechanism from manifesting. Finally, we reveal a relationship between the equilibrium magnetic field strength, decay rate, and period of oscillatory reconnection, which opens the tantalising possibility of utilizing oscillatory reconnection as a seismological tool. △ Less

Submitted 10 December, 2021; originally announced December 2021.

Comments: 17 pages, 13 figures, accepted for publication in ApJ

Probing the physics of the solar atmosphere with the Multi-slit Solar Explorer (MUSE): I. Coronal Heating

Authors: Bart De Pontieu, Paola Testa, Juan Martinez-Sykora, Patrick Antolin, Konstantinos Karampelas, Viggo Hansteen, Matthias Rempel, Mark C. M. Cheung, Fabio Reale, Sanja Danilovic, Paolo Pagano, Vanessa Polito, Ineke De Moortel, Daniel Nobrega-Siverio, Tom Van Doorsselaere, Antonino Petralia, Mahboubeh Asgari-Targhi, Paul Boerner, Mats Carlsson, Georgios Chintzoglou, Adrian Daw, Ed DeLuca, Leon Golub, Takuma Matsumoto, Ignacio Ugarte-Urra , et al. (2 additional authors not shown)

Abstract: The Multi-slit Solar Explorer (MUSE) is a proposed NASA MIDEX mission, currently in Phase A, composed of a multi-slit EUV spectrograph (in three narrow spectral bands centered around 171A, 284A, and 108A) and an EUV context imager (in two narrow passbands around 195A and 304A). MUSE will provide unprecedented spectral and imaging diagnostics of the solar corona at high spatial (<0.5 arcsec), and t… ▽ More The Multi-slit Solar Explorer (MUSE) is a proposed NASA MIDEX mission, currently in Phase A, composed of a multi-slit EUV spectrograph (in three narrow spectral bands centered around 171A, 284A, and 108A) and an EUV context imager (in two narrow passbands around 195A and 304A). MUSE will provide unprecedented spectral and imaging diagnostics of the solar corona at high spatial (<0.5 arcsec), and temporal resolution (down to ~0.5s) thanks to its innovative multi-slit design. By obtaining spectra in 4 bright EUV lines (Fe IX 171A , Fe XV 284A, Fe XIX-Fe XXI 108A) covering a wide range of transition region and coronal temperatures along 37 slits simultaneously, MUSE will for the first time be able to "freeze" (at a cadence as short as 10 seconds) with a spectroscopic raster the evolution of the dynamic coronal plasma over a wide range of scales: from the spatial scales on which energy is released (~0.5 arcsec) to the large-scale often active-region size (170 arcsec x 170 arcsec) atmospheric response. We use advanced numerical modeling to showcase how MUSE will constrain the properties of the solar atmosphere on the spatio-temporal scales (~0.5 arcsec, ~20 seconds) and large field-of-view on which various state-of-the-art models of the physical processes that drive coronal heating, solar flares and coronal mass ejections (CMEs) make distinguishing and testable predictions. We describe how the synergy between MUSE, the single-slit, high-resolution Solar-C EUVST spectrograph, and ground-based observatories (DKIST and others) can address how the solar atmosphere is energized, and the critical role MUSE plays because of the multi-scale nature of the physical processes involved. In this first paper, we focus on how comparisons between MUSE observations and theoretical models will significantly further our understanding of coronal heating mechanisms. △ Less

Submitted 29 June, 2021; originally announced June 2021.

Comments: 46 pages, 22 figures, submitted to ApJ

Transverse loop oscillations via vortex shedding: a self oscillating process

Authors: Konstantinos Karampelas, Tom Van Doorsselaere

Abstract: Identifying the underlying mechanisms behind the excitation of transverse oscillations in coronal loops is essential for their role as diagnostic tools in coronal seismology and their potential use as wave heating mechanisms of the solar corona. In this paper, we explore the concept of these transverse oscillations being excited through a self-sustaining process, caused by Alfvénic vortex shedding… ▽ More Identifying the underlying mechanisms behind the excitation of transverse oscillations in coronal loops is essential for their role as diagnostic tools in coronal seismology and their potential use as wave heating mechanisms of the solar corona. In this paper, we explore the concept of these transverse oscillations being excited through a self-sustaining process, caused by Alfvénic vortex shedding from strong background flows interacting with coronal loops. We show for the first time in 3D simulations that vortex shedding can generate transverse oscillations in coronal loops, in the direction perpendicular to the flow due to periodic "pushing" by the vortices. By plotting the power spectral density we identify the excited frequencies of these oscillations. We see that these frequencies are dependent both on the speed of the flow, as well as the characteristics of the oscillating loop. This, in addition to the fact that the background flow is constant and not periodic, makes us treat this as a self-oscillating process. Finally, the amplitudes of the excited oscillations are near constant in amplitude, and are comparable with the observations of decay-less oscillations. This makes the mechanism under consideration a possible interpretation of these undamped waves in coronal loops. △ Less

Submitted 5 February, 2021; originally announced February 2021.

Comments: 8 pages, 8 figures, accepted for publication in ApJL

The First 3D Coronal Loop Model Heated by MHD Waves against Radiative Losses

Authors: Mijie Shi, Tom Van Doorsselaere, Mingzhe Guo, Konstantinos Karampelas, Bo Li, Patrick Antolin

Abstract: In the quest to solve the long-standing coronal heating problem, it has been suggested half a century ago that coronal loops could be heated by waves. Despite the accumulating observational evidence of the possible importance of coronal waves, still no 3D MHD simulations exist that show significant heating by MHD waves. Here we report on the first 3D coronal loop model heating the plasma against r… ▽ More In the quest to solve the long-standing coronal heating problem, it has been suggested half a century ago that coronal loops could be heated by waves. Despite the accumulating observational evidence of the possible importance of coronal waves, still no 3D MHD simulations exist that show significant heating by MHD waves. Here we report on the first 3D coronal loop model heating the plasma against radiative cooling. The coronal loop is driven at the footpoint by transverse oscillations and subsequently the induced Kelvin-Helmholtz instability deforms the loop cross-section and generates small-scale structures. Wave energy is transfered to smaller scales where it is dissipated, overcoming the internal energy losses by radiation. These results open up a new avenue to address the coronal heating problem. △ Less

Submitted 25 February, 2021; v1 submitted 4 January, 2021; originally announced January 2021.

Comments: 17 pages, 8 figures, accepted for publication in ApJ

Generating transverse loop oscillations through a steady-flow driver

Authors: Konstantinos Karampelas, Tom Van Doorsselaere

Abstract: In recent years, the decay-less regime of standing transverse oscillations in coronal loops has been the topic of many observational and numerical studies, focusing on their physical characteristics, as well as their importance for coronal seismology and wave heating. However, no definitive answer has yet been given on the driving mechanism behind these oscillations, with most studies focusing on… ▽ More In recent years, the decay-less regime of standing transverse oscillations in coronal loops has been the topic of many observational and numerical studies, focusing on their physical characteristics, as well as their importance for coronal seismology and wave heating. However, no definitive answer has yet been given on the driving mechanism behind these oscillations, with most studies focusing on the use of periodic footpoint drivers as a means to excite them. In this paper, our goal is to explore the concept of these standing waves being self-sustained oscillations, driven by a constant background flow. To that end, we use the PLUTO code, to perform $3$D magnetohydrodynamic simulations of a gravitationally stratified straight flux tube in a coronal environment, in the presence of a weak flow around the loop, perpendicular to its axis. Once this flow is firmly set up, a transverse oscillation is initiated, dominated by the fundamental kink mode of a standing wave, while the existence of a second harmonic is revealed, with a frequency ratio to the fundamental mode near the observed ones in decay-less oscillations. The presence of vortex shedding is also established in our simulations, which is connected to the "slippery" interaction between the oscillator and its surrounding plasma. We thus present a proof-of-concept of a self-oscillation in a coronal loop, and we propose it as a mechanism that could interpret the observed decay-less transverse oscillations of coronal loops. △ Less

Submitted 27 July, 2020; originally announced July 2020.

Comments: 7 pages, 3 figures

Journal ref: The Astrophysical Journal Letters, Volume 897, L35 (2020)

Estimating the energy dissipation {from Kelvin-Helmholtz instability induced} turbulence in oscillating coronal loops}

Authors: Andrew Hillier, Tom Van Doorsselaere, Konstantinos Karampelas

Abstract: Kelvin-Helmholtz {instability induced} turbulence is one promising mechanism by which loops in the solar corona can be heated by MHD waves. In this paper we present an analytical model of the dissipation rate of {Kelvin-Helmholtz instability induced} turbulence $\varepsilon_{\rm D}$, finding it scales as the wave amplitude ($d$) to the third power ($\varepsilon_{\rm D}\propto d^3$). Based on the c… ▽ More Kelvin-Helmholtz {instability induced} turbulence is one promising mechanism by which loops in the solar corona can be heated by MHD waves. In this paper we present an analytical model of the dissipation rate of {Kelvin-Helmholtz instability induced} turbulence $\varepsilon_{\rm D}$, finding it scales as the wave amplitude ($d$) to the third power ($\varepsilon_{\rm D}\propto d^3$). Based on the concept of steady-state turbulence, we expect the turbulence heating throughout the volume of {the} loop to match the total energy injected through its footpoints. In situations where this holds, the wave amplitude has to vary as the cube-root of the injected energy. Comparing the analytic results with those of simulations shows that our analytic formulation captures the key aspects of the turbulent dissipation from the numerical work. Applying this model to the observed characteristics of decayless kink waves we predict that the amplitudes of these observed waves is insufficient to turbulently heat the solar corona. △ Less

Submitted 17 July, 2020; originally announced July 2020.

Comments: 6 pages, 1 figure, published in ApJL

Journal ref: The Astrophysical Journal Letters, 897, L13 (2020)

Wave heating in simulated multi-stranded coronal loops

Authors: Mingzhe Guo, Tom Van Doorsselaere, Konstantinos Karampelas, Bo Li

Abstract: It has been found that the Kelvin-Helmholtz instability (KHI) induced by both transverse and torsional oscillations in coronal loops can reinforce the effects of wave heating. In this study, we model a coronal loop as a system of individual strands, and we study wave heating effects by considering a combined transverse and torsional driver at the loop footpoint. We deposit the same energy into the… ▽ More It has been found that the Kelvin-Helmholtz instability (KHI) induced by both transverse and torsional oscillations in coronal loops can reinforce the effects of wave heating. In this study, we model a coronal loop as a system of individual strands, and we study wave heating effects by considering a combined transverse and torsional driver at the loop footpoint. We deposit the same energy into the multi-stranded loop and an equivalent monolithic loop, and then observe a faster increase in the internal energy and temperature in the multi-stranded model. Therefore, the multi-stranded model is more efficient in starting the heating process. Moreover, higher temperature is observed near the footpoint in the multi-stranded loop and near the apex in the monolithic loop. The apparent heating location in the multi-stranded loop agrees with the previous predictions and observations. Given the differences in the results from our multi-stranded loop and monolithic loop simulations, and given that coronal loops are suggested to be multi-stranded on both theoretical and observational grounds, our results suggest that the multi-strandedness of coronal loops needs to be incorporated in future wave-based heating mechanisms. △ Less

Submitted 18 July, 2019; originally announced July 2019.

Comments: 8 figures, accepted for publication in ApJ

Amplitudes and energy fluxes of simulated decayless kink oscillations

Authors: K. Karampelas, T. Van Doorsselaere, D. J. Pascoe, M. Guo, P. Antolin

Abstract: Recent observations with the Atmospheric Imaging Assembly (AIA) instrument on the SDO spacecraft have revealed the existence of decayless coronal kink oscillations. These transverse oscillations are not connected to any external phenomena like flares or coronal mass ejections, and show significantly lower amplitudes than the externally excited decaying oscillations. Numerical studies have managed… ▽ More Recent observations with the Atmospheric Imaging Assembly (AIA) instrument on the SDO spacecraft have revealed the existence of decayless coronal kink oscillations. These transverse oscillations are not connected to any external phenomena like flares or coronal mass ejections, and show significantly lower amplitudes than the externally excited decaying oscillations. Numerical studies have managed to reproduce such decayless oscillations in the form of footpoint driven standing waves in coronal loops, and to treat them as a possible mechanism for wave heating of the solar corona. Our aim is to investigate the correlation between the observed amplitudes of the oscillations and input the energy flux from different drivers. We perform 3D MHD simulations in single, straight, density-enhanced coronal flux tubes for different drivers, in the presence of gravity. Synthetic images at different spectral lines are constructed with the use of the FoMo code. The development of the Kelvin-Helmholtz instability leads to mixing of plasma between the flux tube and the hot corona. Once the KHI is fully developed, the amplitudes of the decayless oscillations show only a weak correlation with the driver strength. We find that low amplitude decayless kink oscillations may correspond to significant energy fluxes of the order of the radiative losses for the Quiet Sun. A clear correlation between the input energy flux and the observed amplitudes from our synthetic imaging data cannot be established. Stronger drivers lead to higher vales of the line width estimated energy fluxes. Finally, estimations of the energy fluxes by spectroscopic data are affected by the LOS angle, favoring combined analysis of imaging and spectroscopic data for single oscillating loops. △ Less

Submitted 5 June, 2019; originally announced June 2019.

Comments: 22 pages, 9 figures

Journal ref: Frontiers in Astronomy and Space Sciences (2019), 6, 38

Coronal loop transverse oscillations excited by different driver frequencies

Authors: Andrey Afanasyev, Konstantinos Karampelas, Tom Van Doorsselaere

Abstract: We analyse transverse oscillations of a coronal loop excited by continuous monoperiodic motions of the loop footpoint at different frequencies in the presence of gravity. Using the MPI-AMRVAC code, we perform three-dimensional numerical magnetohydrodynamic simulations, considering the loop as a magnetic flux tube filled in with denser, hotter, and gravitationally stratified plasma. We show the res… ▽ More We analyse transverse oscillations of a coronal loop excited by continuous monoperiodic motions of the loop footpoint at different frequencies in the presence of gravity. Using the MPI-AMRVAC code, we perform three-dimensional numerical magnetohydrodynamic simulations, considering the loop as a magnetic flux tube filled in with denser, hotter, and gravitationally stratified plasma. We show the resonant response of the loop to its external excitation and analyse the development of the Kelvin-Helmholtz instability at different heights. We also study the spatial distribution of plasma heating due to transverse oscillations along the loop. The positions of the maximum heating are in total agreement with those for the intensity of the Kelvin-Helmholtz instability, and correspond to the standing wave anti-nodes in the resonant cases. The initial temperature configuration and plasma mixing effect appear to play a significant role in plasma heating by transverse footpoint motions. In particular, the development of the Kelvin-Helmholtz instability in a hotter loop results in the enhancement of the mean plasma temperature in the domain. △ Less

Submitted 14 May, 2019; originally announced May 2019.

Comments: Published in ApJ

Wave heating in gravitationally stratified coronal loops in the presence of resistivity and viscosity

Authors: K. Karampelas, T. Van Doorsselaere, M. Guo

Abstract: In recent years, coronal loops have been the focus of studies related to the damping of different magnetohydrodynamic (MHD) surface waves and their connection with coronal seismology and wave heating. For a better understanding of wave heating, we need to take into account the effects of different dissipation coefficients such as resistivity and viscosity, the importance of the loop physical chara… ▽ More In recent years, coronal loops have been the focus of studies related to the damping of different magnetohydrodynamic (MHD) surface waves and their connection with coronal seismology and wave heating. For a better understanding of wave heating, we need to take into account the effects of different dissipation coefficients such as resistivity and viscosity, the importance of the loop physical characteristics, and the ways gravity can factor into the evolution of these phenomena. We aim to map the sites of energy dissipation from transverse waves in coronal loops in the presence and absence of gravitational stratification and to compare ideal, resistive, and viscous MHD. Using the PLUTO code, we performed 3D MHD simulations of kink waves in single, straight, density-enhanced coronal flux tubes of multiple temperatures. We see the creation of spatially expanded Kelvin-Helmholtz eddies along the loop, which deform the initial monolithic loop profile. For the case of driven oscillations, the Kelvin-Helmholtz instability develops despite physical dissipation, unless very high values of shear viscosity are used. Energy dissipation gets its highest values near the apex, but is present all along the loop. We observe an increased efficiency of wave heating once the kinetic energy saturates at the later stages of the simulation and a turbulent density profile has developed. The inclusion of gravity greatly alters the dynamic evolution of our systems and should not be ignored in future studies. Stronger physical dissipation leads to stronger wave heating in our set-ups. Finally, once the kinetic energy of the oscillating loop starts saturating, all the excess input energy turns into internal energy, resulting in more efficient wave heating. △ Less

Submitted 15 January, 2019; v1 submitted 9 January, 2019; originally announced January 2019.

Comments: 15 pages, 13 figures. Accepted for publication in Astronomy and Astrophysics (A&A)

Journal ref: A&A 623, A53 (2019)

Heating effects from driven transverse and Alfvén waves in coronal loops

Authors: Mingzhe Guo, Tom Van Doorsselaere, Kostas Karampelas, Bo Li, Patrick Antolin, Ineke De Moortel

Abstract: Recent numerical studies revealed that transverse motions of coronal loops can induce the Kelvin-Helmholtz Instability (KHI). This process could be important in coronal heating because it leads to dissipation of energy at small spatial-scale plasma interactions. Meanwhile, small amplitude decayless oscillations in coronal loops have been discovered recently in observations of SDO/AIA. We model suc… ▽ More Recent numerical studies revealed that transverse motions of coronal loops can induce the Kelvin-Helmholtz Instability (KHI). This process could be important in coronal heating because it leads to dissipation of energy at small spatial-scale plasma interactions. Meanwhile, small amplitude decayless oscillations in coronal loops have been discovered recently in observations of SDO/AIA. We model such oscillations in coronal loops and study wave heating effects, considering a kink and Alfv{é}n driver separately and a mixed driver at the bottom of flux tubes. Both the transverse and Alfv{é}n oscillations can lead to the KHI. Meanwhile, the Alfv{é}n oscillations established in loops will experience phase mixing. Both processes will generate small spatial-scale structures, which can help the dissipation of wave energy. Indeed, we observe the increase of internal energy and temperature in loop regions. The heating is more pronounced for the simulation containing the mixed kink and Alfv{é}n driver. This means that the mixed wave modes can lead to a more efficient energy dissipation in the turbulent state of the plasma and that the KHI eddies act as an agent to dissipate energy in other wave modes. Furthermore, we also obtained forward modelling results using the FoMo code. We obtained forward models which are very similar to the observations of decayless oscillations. Due to the limited resolution of instruments, neither Alfv{é}n modes nor the fine structures are observable. Therefore, this numerical study shows that Alfv{é}n modes probably can co-exist with kink modes, leading to enhanced heating. △ Less

Submitted 19 November, 2018; originally announced November 2018.

Broadening of the DEM by multi-shelled and turbulent loops

Authors: Tom Van Doorsselaere, Patrick Antolin, Kostas Karampelas

Abstract: Broad differential emission measure (DEM) distributions in the corona are a sign of multi-thermal plasma along the line-of-sight. Traditionally, this is interpreted as evidence of multi-stranded loops. Recently, however, it has been shown that multi-stranded loops are unlikely to exist in the solar corona, because of their instability to transverse perturbations. We aim to test if loop models subj… ▽ More Broad differential emission measure (DEM) distributions in the corona are a sign of multi-thermal plasma along the line-of-sight. Traditionally, this is interpreted as evidence of multi-stranded loops. Recently, however, it has been shown that multi-stranded loops are unlikely to exist in the solar corona, because of their instability to transverse perturbations. We aim to test if loop models subject to the Transverse Wave-Induced Kelvin-Helmholtz (TWIKH) instability result in broad DEMs, potentially explaining the observations. We took simulation snapshots and compute the numerical DEM. Moreover, we performed forward-modelling in the relevant AIA channels before reconstructing the DEM. We find that turbulent loop models broaden their initial DEM, because of the turbulent mixing. The width of the DEM is determined by the initial temperature contrast with the exterior. We conclude that impulsively excited loop models have a rather narrow DEM, but that continuously driven models result in broad DEMs that are comparable to the observations. △ Less

Submitted 15 October, 2018; originally announced October 2018.

Journal ref: A&A 620, A65 (2018)

Simulations of fully deformed oscillating flux tubes

Authors: K. Karampelas, T. Van Doorsselaere

Abstract: In recent years, a number of numerical studies have been focusing on the significance of the Kelvin-Helmholtz instability (KHI) in the dynamics of oscillating coronal loops. This process enhances the transfer of energy into smaller scales, and has been connected with heating of coronal loops, when dissipation mechanisms, such as resistivity, are considered. However, the turbulent layer is expected… ▽ More In recent years, a number of numerical studies have been focusing on the significance of the Kelvin-Helmholtz instability (KHI) in the dynamics of oscillating coronal loops. This process enhances the transfer of energy into smaller scales, and has been connected with heating of coronal loops, when dissipation mechanisms, such as resistivity, are considered. However, the turbulent layer is expected near the outer regions of the loops. Therefore, the effects of wave heating are expected to be confined to the loop's external layers, leaving their denser inner parts without a heating mechanism. In the current work we aim to study the spatial evolution of wave heating effects from a footpoint driven standing kink wave in a coronal loop. Using the MPI-AMRVAC code, we performed ideal, three dimensional magnetohydrodynamic simulations of footpoint driven transverse oscillations of a cold, straight coronal flux tube, embedded in a hotter environment. We have also constructed forward models for our simulation using the FoMo code. The developed Transverse Wave Induced Kelvin-Helmholtz (TWIKH) rolls expand throughout the tube cross-section, and cover it entirely. This turbulence significantly alters the initial density profile, leading to a fully deformed cross section. As a consequence, the resistive and viscous heating rate both increase over the entire loop cross section. The resistive heating rate takes its maximum values near the footpoints, while the viscous heating rate at the apex. We conclude that even a monoperiodic driver can spread wave heating over the whole loop cross section, potentially providing a heating source in the inner loop region. Despite the loop's fully deformed structure, forward modelling still shows the structure appearing as a loop. △ Less

Submitted 23 January, 2018; originally announced January 2018.

Comments: 5 pages, 6 figures

Journal ref: A&A 610, L9 (2018)

Heating by transverse waves in simulated coronal loops

Authors: K. Karampelas, T. Van Doorsselaere, P. Antolin

Abstract: Recent numerical studies of oscillating flux tubes have established the significance of resonant absorption in the damping of propagating transverse oscillations in coronal loops. The nonlinear nature of the mechanism has been examined alongside the Kelvin-Helmholtz instability, which is expected to manifest in the resonant layers at the edges of the flux tubes. While these two processes have been… ▽ More Recent numerical studies of oscillating flux tubes have established the significance of resonant absorption in the damping of propagating transverse oscillations in coronal loops. The nonlinear nature of the mechanism has been examined alongside the Kelvin-Helmholtz instability, which is expected to manifest in the resonant layers at the edges of the flux tubes. While these two processes have been hypothesized to heat coronal loops through the dissipation of wave energy into smaller scales, the occurring mixing with the hotter surroundings can potentially hide this effect. We aim to study the effects of wave heating from driven and standing kink waves in a coronal loop. Using the MPI-AMRVAC code, we perform ideal, three dimensional magnetohydrodynamic (MHD) simulations of both (a) footpoint driven and (b) free standing oscillations in a straight coronal flux tube, in the presence of numerical resistivity. We have observed the development of Kelvin-Helmholtz eddies at the loop boundary layer of all three models considered here, as well as an increase of the volume averaged temperature inside the loop. The main heating mechanism in our setups was Ohmic dissipation, as indicated by the higher values for the temperatures and current densities located near the footpoints. The introduction of a temperature gradient between the inner tube and the surrounding plasma, suggests that the mixing of the two regions, in the case of hotter environment, greatly increases the temperature of the tube at the site of the strongest turbulence, beyond the contribution of the aforementioned wave heating mechanism. △ Less

Submitted 13 June, 2017; v1 submitted 8 June, 2017; originally announced June 2017.

Comments: 10 pages, 10 figures

Journal ref: A&A 604, A130 (2017)

Velocity asymmetries in YSO jets: Intrinsic and extrinsic mechanisms

Authors: T. Matsakos, N. Vlahakis, K. Tsinganos, K. Karampelas, C. Sauty, V. Cayatte, S. P. Matt, S. Massaglia, E. Trussoni, A. Mignone

Abstract: It is a well established fact that some YSO jets (e.g. RW Aur) display different propagation speeds between their blue and red shifted parts, a feature possibly associated with the central engine or the environment in which the jet propagates. In order to understand the origin of asymmetric YSO jet velocities, we investigate the efficiency of two candidate mechanisms, one based on the intrinsic pr… ▽ More It is a well established fact that some YSO jets (e.g. RW Aur) display different propagation speeds between their blue and red shifted parts, a feature possibly associated with the central engine or the environment in which the jet propagates. In order to understand the origin of asymmetric YSO jet velocities, we investigate the efficiency of two candidate mechanisms, one based on the intrinsic properties of the system and one based on the role of the external medium. In particular, a parallel or anti-parallel configuration between the protostellar magnetosphere and the disk magnetic field is considered and the resulting dynamics are examined both in an ideal and a resistive magneto-hydrodynamical (MHD) regime. Moreover, we explore the effects of a potential difference in the pressure of the environment, as a consequence of the non-uniform density distribution of molecular clouds. Ideal and resistive axisymmetric numerical simulations are carried out for a variety of models, all of which are based on a combination of two analytical solutions, a disk wind and a stellar outflow. We find that jet velocity asymmetries can indeed occur both when multipolar magnetic moments are present in the star-disk system as well as when non-uniform environments are considered. The latter case is an external mechanism that can easily explain the large time scale of the phenomenon, whereas the former one naturally relates it to the YSO intrinsic properties. [abridged] △ Less

Submitted 4 August, 2012; originally announced August 2012.

Comments: accepted for publication in A&A