-
SIRIUS: Identifying Metal-poor Stars Enriched by a Single Supernova in a Dwarf Galaxy Cosmological Zoom-in Simulation Resolving Individual Massive Stars
Authors:
Yutaka Hirai,
Takayuki R. Saitoh,
Michiko S. Fujii,
Katsuhiro Kaneko,
Timothy C. Beers
Abstract:
Metal-poor stars enriched by a single supernova (mono-enriched stars) are direct proof (and provide valuable probes) of supernova nucleosynthesis. Photometric and spectroscopic observations have shown that metal-poor stars have a wide variety of chemical compositions; the star's chemical composition reflects the nucleosynthesis process(es) that occurred before the star's formation. While the ident…
▽ More
Metal-poor stars enriched by a single supernova (mono-enriched stars) are direct proof (and provide valuable probes) of supernova nucleosynthesis. Photometric and spectroscopic observations have shown that metal-poor stars have a wide variety of chemical compositions; the star's chemical composition reflects the nucleosynthesis process(es) that occurred before the star's formation. While the identification of mono-enriched stars enables us to study the ejecta properties of a single supernova, the fraction of mono-enriched stars among metal-poor stars remains unknown. Here we identify mono-enriched stars in a dwarf galaxy cosmological zoom-in simulation resolving individual massive stars. We find that the fraction of mono-enriched stars is higher for lower metallicity, stars with [Fe/H] $< -2.5$. The percentages of mono-enriched stars are 11% at [Fe/H] = $-$5.0 and 1% at [Fe/H] = $-$2.5, suggesting that most metal-poor stars are affected by multiple supernovae. We also find that mono-enriched stars tend to be located near the center of the simulated dwarf. Such regions will be explored in detail in upcoming surveys such as the Prime Focus Spectrograph (PFS) on the Subaru telescope.
△ Less
Submitted 27 January, 2025; v1 submitted 27 November, 2024;
originally announced November 2024.
-
Development of a new wideband heterodyne receiver system for the Osaka 1.85-m mm-submm telescope -- Corrugated horn & Optics covering 210-375 GHz band
Authors:
Yasumasa Yamasaki,
Sho Masui,
Hideo Ogawa,
Hiroshi Kondo,
Takeru Matsumoto,
Masanari Okawa,
Koki Yokoyama,
Taisei Minami,
Ryotaro Konishi,
Sana Kawashita,
Ayu Konishi,
Yuka Nakao,
Shimpei Nishimoto,
Sho Yoneyama,
Shota Ueda,
Yutaka Hasegawa,
Shinji Fujita,
Atsushi Nishimura,
Takafumi Kojima,
Keiko Kaneko,
Ryo Sakai,
Alvaro Gonzalez,
Yoshinori Uzawa,
Toshikazu Onishi
Abstract:
The corrugated horn is a high performance feed often used in radio telescopes. There has been a growing demand for wideband optics and corrugated horns in millimeter and submillimeter-wave receivers. It improves the observation efficiency and allows us to observe important emission lines such as CO in multiple excited states simultaneously. However, in the millimeter/submillimeter band, it has bee…
▽ More
The corrugated horn is a high performance feed often used in radio telescopes. There has been a growing demand for wideband optics and corrugated horns in millimeter and submillimeter-wave receivers. It improves the observation efficiency and allows us to observe important emission lines such as CO in multiple excited states simultaneously. However, in the millimeter/submillimeter band, it has been challenging to create a conical corrugated horn with a fractional bandwidth of ~60% because the wavelength is very short, making it difficult to make narrow corrugations. In this study, we designed a conical corrugated horn with good return loss, low cross-polarization, and symmetric beam pattern in the 210-375GHz band (56% fractional bandwidth) by optimizing the dimensions of the corrugations. The corrugated horn was installed on the Osaka 1.85-m mm-submm telescope with the matched frequency-independent optics, and simultaneous observations of 12CO, 13CO, and C18O (J = 2-1, 3-2) were successfully made. In this paper, we describe the new design of the corrugated horn and report the performance evaluation results including the optics.
△ Less
Submitted 31 May, 2021; v1 submitted 28 May, 2021;
originally announced May 2021.
-
Development of a new wideband heterodyne receiver system for the Osaka 1.85-m mm-submm telescope -- Receiver development & the first light of simultaneous observation in 230GHz and 345GHz bands with an SIS-mixer with 4-21GHz IF output
Authors:
Sho Masui,
Yasumasa Yamasaki,
Hideo Ogawa,
Hiroshi Kondo,
Koki Yokoyama,
Takeru Matsumoto,
Taisei Minami,
Masanari Okawa,
Ryotaro Konishi,
Sana Kawashita,
Ayu Konishi,
Yuka Nakao,
Shimpei Nishimoto,
Sho Yoneyama,
Shota Ueda,
Yutaka Hasegawa,
Shinji Fujita,
Atsushi Nishimura,
Takafumi Kojima,
Kazunori Uemizu,
Keiko Kaneko,
Ryo Sakai,
Alvaro Gonzalez,
Yoshinori Uzawa,
Toshikazu Onishi
Abstract:
We have developed a wideband receiver system for simultaneous observations in CO lines of J = 2-1 and J = 3-2 transitions using the Osaka 1.85-m mm-submm telescope. As a frequency separation system, we developed multiplexers that connect three types of diplexers, each consisting of branch-line couplers and high-pass filters. The radio frequency (RF) signal is eventually distributed into four frequ…
▽ More
We have developed a wideband receiver system for simultaneous observations in CO lines of J = 2-1 and J = 3-2 transitions using the Osaka 1.85-m mm-submm telescope. As a frequency separation system, we developed multiplexers that connect three types of diplexers, each consisting of branch-line couplers and high-pass filters. The radio frequency (RF) signal is eventually distributed into four frequency bands, each of which is fed to a superconductor-insulator-superconductor (SIS) mixer. The RF signal from the horn is divided into two frequency bands by a wideband diplexer with a fractional bandwidth of 56%, and then each frequency band is further divided into two bands by each diplexer. The developed multiplexers were designed, fabricated, and characterized using a vector network analyzer. The measurement results showed good agreement with the simulation. The receiver noise temperature was measured by connecting the SIS-mixers, one of which has a wideband 4-21GHz intermediate frequency (IF) output. The receiver noise temperatures were measured to be ~70K in the 220GHz band, ~100K in the 230GHz band, 110-175K in the 330GHz band, and 150-250K in the 345GHz band. This receiver system has been installed on the 1.85-m telescope at the Nobeyama Radio Observatory. We succeeded in the simultaneous observations of six CO isotopologue lines with the transitions of J = 2-1 and J = 3-2 toward the Orion KL as well as the on-the-fly (OTF) mappings toward the Orion KL and W 51.
△ Less
Submitted 17 May, 2021;
originally announced May 2021.
-
Wideband 67-116 GHz receiver development for ALMA Band 2
Authors:
P. Yagoubov,
T. Mroczkowski,
V. Belitsky,
D. Cuadrado-Calle,
F. Cuttaia,
G. A. Fuller,
J. -D. Gallego,
A. Gonzalez,
K. Kaneko,
P. Mena,
R. Molina,
R. Nesti,
V. Tapia,
F. Villa,
M. Beltran,
F. Cavaliere,
J. Ceru,
G. E. Chesmore,
K. Coughlin,
C. De Breuck,
M. Fredrixon,
D. George,
H. Gibson,
J. Golec,
A. Josaitis
, et al. (21 additional authors not shown)
Abstract:
ALMA has been operating since 2011, but has not yet been populated with the full suite of intended frequency bands. In particular, ALMA Band 2 (67-90 GHz) is the final band in the original ALMA band definition to be approved for production. We aim to produce a wideband, tuneable, sideband-separating receiver with 28 GHz of instantaneous bandwidth per polarisation operating in the sky frequency ran…
▽ More
ALMA has been operating since 2011, but has not yet been populated with the full suite of intended frequency bands. In particular, ALMA Band 2 (67-90 GHz) is the final band in the original ALMA band definition to be approved for production. We aim to produce a wideband, tuneable, sideband-separating receiver with 28 GHz of instantaneous bandwidth per polarisation operating in the sky frequency range 67-116 GHz. Our design anticipates new ALMA requirements following the recommendations in the 2030 ALMA Development Roadmap. The cryogenic cartridge is designed to be compatible with the ALMA Band 2 cartridge slot, where the coldest components -- the feedhorns, orthomode transducers, and cryogenic low noise amplifiers -- operate at a temperature of 15 K. We use multiple simulation methods and tools to optimise our designs for both the passive optics and the active components. The cryogenic cartridge interfaces with a room temperature cartridge hosting the local oscillator (LO) and the downconverter module. This warm cartridge is largely based on GaAs semiconductor technology and is optimised to match the cryogenic receiver bandwidth with the required instantaneous LO tuning range. Our collaboration has designed, fabricated, and tested multiple technical solutions for each of the components, producing a state-of-the-art receiver covering the full ALMA Band 2 & 3 atmospheric window. The receiver is suitable for deployment on ALMA in the coming years, and is capable of dual-polarisation, sideband-separating observations in intermediate frequency bands spanning 4-18 GHz, for a total of 28 GHz on-sky bandwidth per polarisation channel. We conclude that the 67-116 GHz wideband implementation for ALMA Band 2 is now feasible, and this receiver is a compelling instrumental upgrade that will enhance observational capabilities and scientific reach.
△ Less
Submitted 20 February, 2020; v1 submitted 20 December, 2019;
originally announced December 2019.
-
Experimental Study of a Planar-integrated Dual-Polarization Balanced SIS Mixer
Authors:
Wenlei Shan,
Shohei Ezaki,
Keiko Kaneko,
Akihira Miyachi,
Takafumi Kojima,
Yoshinori Uzawa
Abstract:
A dual-polarization balanced superconductor-insulator-superconductor mixer operating at 2 mm wavelength is realized in form of a monolithic planar integrated circuit. Planar orthomode transducers and LO couplers are enabled by using silicon membranes that are locally formed on the silicon-on-insulator substrate. The performance of the balanced mixer is experimentally investigated. Over the entire…
▽ More
A dual-polarization balanced superconductor-insulator-superconductor mixer operating at 2 mm wavelength is realized in form of a monolithic planar integrated circuit. Planar orthomode transducers and LO couplers are enabled by using silicon membranes that are locally formed on the silicon-on-insulator substrate. The performance of the balanced mixer is experimentally investigated. Over the entire RF band (125-163 GHz), the balanced mixer shows an LO noise rejection ratio about 15 dB, an overall receiver noise about 40 K, and a cross-polarization <-20 dB. The demonstrated compactness and the performance of the integrated circuit indicate that this approach is feasible in developing heterodyne focal plane arrays.
△ Less
Submitted 18 August, 2019;
originally announced August 2019.
-
Wideband 67-116 GHz cryogenic receiver development for ALMA Band 2
Authors:
P. Yagoubov,
T. Mroczkowski,
L. Testi,
C. De Breuck,
A. Gonzalez,
K. Kaneko,
Y. Uzawa,
R. Molina,
V. Tapia,
N. Reyes,
P. Mena,
M. Beltran,
R. Nesti,
F. Cuttaia,
S. Ricciardi,
M. Sandri,
L. Terenzi,
F. Villa,
A. Murk,
M. Kotiranta,
W. McGenn,
D. Cuadrado-Calle,
G. A. Fuller,
D. George,
J. -D. Gallego
, et al. (3 additional authors not shown)
Abstract:
The Atacama Large Millimeter/sub-millimeter Array (ALMA) is already revolutionising our understanding of the Universe. However, ALMA is not yet equipped with all of its originally planned receiver bands, which will allow it to observe over the full range of frequencies from 35-950 GHz accessible through the Earth's atmosphere. In particular Band 2 (67-90 GHz) has not yet been approved for construc…
▽ More
The Atacama Large Millimeter/sub-millimeter Array (ALMA) is already revolutionising our understanding of the Universe. However, ALMA is not yet equipped with all of its originally planned receiver bands, which will allow it to observe over the full range of frequencies from 35-950 GHz accessible through the Earth's atmosphere. In particular Band 2 (67-90 GHz) has not yet been approved for construction. Recent technological developments in cryogenic monolithic microwave integrated circuit (MMIC) high electron mobility transistor (HEMT) amplifier and orthomode transducer (OMT) design provide an opportunity to extend the originally planned on-sky bandwidth, combining ALMA Bands 2 and 3 into one receiver cartridge covering 67-116 GHz.
The IF band definition for the ALMA project took place two decades ago, when 8 GHz of on-sky bandwidth per polarisation channel was an ambitious goal. The new receiver design we present here allows the opportunity to expand ALMA's wideband capabilities, anticipating future upgrades across the entire observatory. Expanding ALMA's instantaneous bandwidth is a high priority, and provides a number of observational advantages, including lower noise in continuum observations, the ability to probe larger portions of an astronomical spectrum for, e.g., widely spaced molecular transitions, and the ability to scan efficiently in frequency space to perform surveys where the redshift or chemical complexity of the object is not known a priori. Wider IF bandwidth also reduces uncertainties in calibration and continuum subtraction that might otherwise compromise science objectives.
Here we provide an overview of the component development and overall design for this wideband 67-116 GHz cryogenic receiver cartridge, designed to operate from the Band 2 receiver cartridge slot in the current ALMA front end receiver cryostat.
△ Less
Submitted 9 December, 2018;
originally announced December 2018.
-
ASTRO-H White Paper - Accreting Pulsars, Magnetars, and Related Sources
Authors:
S. Kitamoto,
T. Enoto,
S. Safi-Harb,
K. Pottschmidt,
C. Ferrigno,
M. Chernyakova,
T. Hayashi,
N. Hell,
K. Kaneko,
D. Khangulyan,
T. Kohmura,
H. Krimm,
K. Makishima,
T. Nakano,
H. Odaka,
M. Ohno,
M. Sasano,
S. Sugita,
Y. Terada,
T. Yasuda,
T. Yuasa
Abstract:
As the endpoints of massive star evolution, neutron stars are enigmatic celestial objects characterized by extremely dense and exotic nuclear matter, magnetospheres with positrons (antimatter), rapid rotation and ultra-strong magnetic fields. Such an extreme environment has provided an accessible astrophysical laboratory to study physics under conditions unattainable on Earth and to tackle a range…
▽ More
As the endpoints of massive star evolution, neutron stars are enigmatic celestial objects characterized by extremely dense and exotic nuclear matter, magnetospheres with positrons (antimatter), rapid rotation and ultra-strong magnetic fields. Such an extreme environment has provided an accessible astrophysical laboratory to study physics under conditions unattainable on Earth and to tackle a range of fundamental questions related to: the aftermath of stellar evolution and the powerful explosions of massive stars, the equation of state and physics of some of the most exotic and magnetic stars in the Universe, the workings of the most powerful particle accelerators in our Galaxy and beyond, and the sources of gravitational waves that are yet to be detected. Recent observations revealed a great diversity of neutron stars, including ultra-strongly magnetized pulsars, referred to as "magnetars", and unusual types of accreting X-ray pulsars. In this white paper, we highlight the prospects of the upcoming X-ray mission, ASTRO-H, in studying these highly magnetized neutron stars.
△ Less
Submitted 2 December, 2014;
originally announced December 2014.
