-
Development of Solar Flare X-ray Polarimeter with Micro-Pixel CMOS Sensors
Authors:
Kouichi Hagino,
Tatsuaki Kato,
Toshiya Iwata,
Masahiro Ichihashi,
Hiroumi Matsuhashi,
Gen Fujimoto,
Riki Sato,
Hirokazu Odaka,
Noriyuki Narukage,
Shota Arai,
Takahiro Minami,
Satoshi Takashima,
Aya Bamba
Abstract:
We are developing an X-ray polarimeter using micro-pixel CMOS sensors for solar flare X-ray polarimetry. The system consists of a 2.5-$μ$m pixel CMOS image sensor with a 12.8$\times$12.8 mm$^2$ imaging area and a readout system based on a Zynq System-on-Chip. While previous studies have validated this concept, no realistic feasibility studies have been conducted for the solar flare X-ray polarizat…
▽ More
We are developing an X-ray polarimeter using micro-pixel CMOS sensors for solar flare X-ray polarimetry. The system consists of a 2.5-$μ$m pixel CMOS image sensor with a 12.8$\times$12.8 mm$^2$ imaging area and a readout system based on a Zynq System-on-Chip. While previous studies have validated this concept, no realistic feasibility studies have been conducted for the solar flare X-ray polarization observation. In this work, we performed polarization sensitivity measurements at synchrotron facilities. The results show that our polarimeter is sensitive to the X-ray polarization, exhibiting a modulation factor of 5-15% at an energy range of 6-22 keV. The measurements also determined the thickness of the sensitive layer to be approximately 5 $μ$m, and the thicknesses of the insensitive layers to be 0.8 $μ$m (Si), 2.1 $μ$m (SiO2), and 0.24 $μ$m (Cu). These measured thicknesses lead to a quantum efficiency of 3-4% at 10 keV. Based on these experimental evaluations, we estimated the sensitivity of the micro-pixel CMOS polarimeter system. We found that, when combined with a telescope with an effective area of $\sim$10 cm$^2$, this system can detect X-ray polarization with a polarization degree of a few percent for M-class flares.
△ Less
Submitted 4 September, 2025;
originally announced September 2025.
-
XRISM analysis of the complex Fe K$α$ line in Centaurus A
Authors:
David Bogensberger,
Yuya Nakatani,
Tahir Yaqoob,
Yoshihiro Ueda,
Richard Mushotzky,
Jon M. Miller,
Luigi C. Gallo,
Yasushi Fukazawa,
Taishu Kayanoki,
Makoto Tashiro,
Hirofumi Noda,
Toshiya Iwata,
Kouichi Hagino,
Misaki Mizumoto,
Misaki Urata,
Frederick S. Porter,
Michael Loewenstein
Abstract:
We analyze the high-resolution XRISM/Resolve spectrum of the Fe K$α$ emission line of the nearest active galactic nucleus, in Centaurus A. The line features two narrow and resolved peaks of Fe K$α_1$, and Fe K$α_2$ with a FWHM of $(4.8\pm0.2)\times10^2$ km/s each. A broad line with a FWHM of $(4.3\pm0.3)\times10^3$ km/s, and with a flux similar to the two narrow line cores, is also required. This…
▽ More
We analyze the high-resolution XRISM/Resolve spectrum of the Fe K$α$ emission line of the nearest active galactic nucleus, in Centaurus A. The line features two narrow and resolved peaks of Fe K$α_1$, and Fe K$α_2$ with a FWHM of $(4.8\pm0.2)\times10^2$ km/s each. A broad line with a FWHM of $(4.3\pm0.3)\times10^3$ km/s, and with a flux similar to the two narrow line cores, is also required. This broad component is not observed in the optical or IR spectra of Cen A. The line shape requires the existence of an emission region that extends from $\sim10^{-3}$ pc to $\sim10^1$ pc. Assuming that the emissivity follows a radial power-law profile of $r^{-q}$, we find $q\approx2$. This may indicate an extended corona, an emitting region that bends towards the corona, or a non-uniform density. When assuming $q=3$, the line shape can only be reproduced by including three emitting components in the model. The measured best-fit inclination is $24^{+13}_{-7}$ degrees, but higher inclinations are only slightly disfavored. A single blurred MYTorusL line profile can describe the line shape, but requires a large relative normalization. This could be due to past variability, modified abundances, or differing geometries. The line shape can be reproduced from the radii measured by reverberation mapping, but only if an additional extended emitting region at small radii is included.
△ Less
Submitted 2 July, 2025;
originally announced July 2025.
-
First operation of LArTPC in the stratosphere as an engineering GRAMS balloon flight (eGRAMS)
Authors:
R. Nakajima,
S. Arai,
K. Aoyama,
Y. Utsumi,
T. Tamba,
H. Odaka,
M. Tanaka,
K. Yorita,
S. Arai,
T. Aramaki,
J. Asaadi,
A. Bamba,
N. Cannady,
P. Coppi,
G. De Nolfo,
M. Errando,
L. Fabris,
T. Fujiwara,
Y. Fukazawa,
P. Ghosh,
K. Hagino,
T. Hakamata,
U. Hijikata,
N. Hiroshima,
M. Ichihashi
, et al. (39 additional authors not shown)
Abstract:
GRAMS (Gamma-Ray and AntiMatter Survey) is a next-generation balloon/satellite experiment utilizing a LArTPC (Liquid Argon Time Projection Chamber), to simultaneously target astrophysical observations of cosmic MeV gamma-rays and conduct an indirect dark matter search using antimatter. While LArTPCs are widely used in particle physics experiments, they have never been operated at balloon altitudes…
▽ More
GRAMS (Gamma-Ray and AntiMatter Survey) is a next-generation balloon/satellite experiment utilizing a LArTPC (Liquid Argon Time Projection Chamber), to simultaneously target astrophysical observations of cosmic MeV gamma-rays and conduct an indirect dark matter search using antimatter. While LArTPCs are widely used in particle physics experiments, they have never been operated at balloon altitudes. An engineering balloon flight with a small-scale LArTPC (eGRAMS) was conducted on July 27th, 2023, to establish a system for safely operating a LArTPC at balloon altitudes and to obtain cosmic-ray data from the LArTPC. The flight was launched from the Japan Aerospace Exploration Agency's (JAXA) Taiki Aerospace Research Field in Hokkaido, Japan. The total flight duration was 3 hours and 12 minutes, including a level flight of 44 minutes at a maximum altitude of 28.9 km. The flight system was landed on the sea and successfully recovered. The LArTPC was successfully operated throughout the flight, and about 0.5 million events of the cosmic-ray data including muons, protons, and Compton scattering gamma-ray candidates, were collected. This pioneering flight demonstrates the feasibility of operating a LArTPC in high-altitude environments, paving the way for future GRAMS missions and advancing our capabilities in MeV gamma-ray astronomy and dark matter research.
△ Less
Submitted 25 November, 2024; v1 submitted 20 September, 2024;
originally announced September 2024.
-
Imaging reconstruction method on X-ray data of CMOS polarimeter combined with coded aperture
Authors:
Tsubasa Tamba,
Hirokazu Odaka,
Taihei Watanabe,
Toshiya Iwata,
Tomoaki Kasuga,
Atsushi Tanimoto,
Satoshi Takashima,
Masahiro Ichihashi,
Hiromasa Suzuki,
Aya Bamba
Abstract:
X-ray polarization is a powerful tool for unveiling the anisotropic characteristics of high-energy celestial objects. We present a novel imaging reconstruction method designed for hard X-ray polarimeters employing a Si CMOS sensor and coded apertures, which function as a photoelectron tracker and imaging optics, respectively. Faced with challenges posed by substantial artifacts and background nois…
▽ More
X-ray polarization is a powerful tool for unveiling the anisotropic characteristics of high-energy celestial objects. We present a novel imaging reconstruction method designed for hard X-ray polarimeters employing a Si CMOS sensor and coded apertures, which function as a photoelectron tracker and imaging optics, respectively. Faced with challenges posed by substantial artifacts and background noise in the coded aperture imaging associated with the conventional balanced correlation method, we adopt the Expectation-Maximization (EM) algorithm as the foundation of our imaging reconstruction method. The newly developed imaging reconstruction method is validated with imaging polarimetry and a series of X-ray beam experiments. The method demonstrates the capability to accurately reproduce an extended source comprising multiple segments with distinct polarization degrees. Comparative analysis exhibits a significant enhancement in imaging reconstruction accuracy compared to the balanced correlation method, with the background noise levels reduced to 17%. The outcomes of this study enhance the feasibility of Cube-Sat imaging polarimetry missions in the hard X-ray band, as the combination of Si CMOS sensors and coded apertures is a promising approach for realizing it.
△ Less
Submitted 7 July, 2024;
originally announced July 2024.
-
Multi-epoch X-ray spectral analysis of Centaurus A: revealing new constraints on iron emission line origins
Authors:
Toshiya Iwata,
Atsushi Tanimoto,
Hirokazu Odaka,
Aya Bamba,
Yoshiyuki Inoue,
Kouichi Hagino
Abstract:
We conduct X-ray reverberation mapping and spectral analysis of the radio galaxy Centaurus A to uncover its central structure. We compare the light curve of the hard X-ray continuum from Swift Burst Alert Telescope observations with that of the Fe K$α$ fluorescence line, derived from the Nuclear Spectroscopic Telescope Array (NuSTAR), Suzaku, XMM-Newton, and Swift X-ray Telescope observations. The…
▽ More
We conduct X-ray reverberation mapping and spectral analysis of the radio galaxy Centaurus A to uncover its central structure. We compare the light curve of the hard X-ray continuum from Swift Burst Alert Telescope observations with that of the Fe K$α$ fluorescence line, derived from the Nuclear Spectroscopic Telescope Array (NuSTAR), Suzaku, XMM-Newton, and Swift X-ray Telescope observations. The analysis of the light curves suggests that a top-hat transfer function, commonly employed in reverberation mapping studies, is improbable. Instead, the relation between these light curves can be described by a transfer function featuring two components: one with a lag of $0.19_{- 0.02}^{+ 0.10}~\mathrm{pc}/c$, and another originating at $r > 1.7~\mathrm{pc}$ that produces an almost constant light curve. Further, we analyze the four-epoch NuSTAR and six-epoch Suzaku spectra, considering the time lag of the reflection component relative to the primary continuum. This spectral analysis supports that the reflecting material is Compton-thin, with $N_{\mathrm{H}} = 3.14_{-0.74}^{+0.44} \times 10^{23}~ \mathrm{cm}^{-2}$. These results suggest that the Fe K$α$ emission may originate from Compton-thin circumnuclear material located at sub-parsec scale, likely a dust torus, and materials at a greater distance.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
Development of the X-ray polarimeter using CMOS imager: polarization sensitivity of a $1.5~{\rm μm}$ pixel CMOS sensor
Authors:
Toshiya Iwata,
Kouichi Hagino,
Hirokazu Odaka,
Tsubasa Tamba,
Masahiro Ichihashi,
Tatsuaki Kato,
Kota Ishiwata,
Haruki Kuramoto,
Hiroumi Matsuhashi,
Shota Arai,
Takahiro Minami,
Satoshi Takashima,
Aya Bamba
Abstract:
We are developing an imaging polarimeter by combining a fine-pixel CMOS image sensor with a coded aperture mask as part of the cipher project, aiming to achieve X-ray polarimetry in the energy range of $10$$\unicode{x2013}$$30~\mathrm{keV}$. A successful proof-of-concept experiment was conducted using a fine-pixel CMOS sensor with a $2.5~\mathrm{μm}$ pixel size. In this study, we conducted beam ex…
▽ More
We are developing an imaging polarimeter by combining a fine-pixel CMOS image sensor with a coded aperture mask as part of the cipher project, aiming to achieve X-ray polarimetry in the energy range of $10$$\unicode{x2013}$$30~\mathrm{keV}$. A successful proof-of-concept experiment was conducted using a fine-pixel CMOS sensor with a $2.5~\mathrm{μm}$ pixel size. In this study, we conducted beam experiments to assess the modulation factor (MF) of the CMOS sensor with a $1.5~\mathrm{μm}$ pixel size manufactured by Canon and to determine if there was any improvement in the MF. The measured MF was $8.32\% \pm 0.34\%$ at $10~\mathrm{keV}$ and $16.10\% \pm 0.68\%$ at $22~\mathrm{keV}$, exceeding those of the $2.5~\mathrm{μm}$ sensor in the $6$$\unicode{x2013}$$22~\mathrm{keV}$ range. We also evaluated the quantum efficiency of the sensor, inferring a detection layer thickness of $2.67 \pm 0.48~{\rm μm}$. To develop a more sensitive polarimeter, a sensor with a thicker detection layer, smaller pixel size, and reduced thermal diffusion effect is desirable.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
Heliocentric Distance Dependence of Zodiacal Light Observed by Hayabusa2#
Authors:
Kohji Tsumura,
Shuji Matsuura,
Kei Sano,
Takahiro Iwata,
Hajime Yano,
Kohei Kitazato,
Kohji Takimoto,
Manabu Yamada,
Tomokatsu Morota,
Toru Kouyama,
Masahiko Hayakawa,
Yasuhiro Yokota,
Eri Tatsumi,
Moe Matsuoka,
Naoya Sakatani,
Rie Honda,
Shingo Kameda,
Hidehiko Suzuki,
Yuichiro Cho,
Kazuo Yoshioka,
Kazunori Ogawa,
Kei Shirai,
Hirotaka Sawada,
Seiji Sugita
Abstract:
Zodiacal light (ZL) is sunlight scattered by interplanetary dust particles (IDPs) at optical wavelengths. The spatial distribution of IDPs in the Solar System may hold an important key to understanding the evolution of the Solar System and material transportation within it. The number density of IDPs can be expressed as $n(r) \sim r^{-α}$, and the exponent $α\sim 1.3$ was obtained by previous obse…
▽ More
Zodiacal light (ZL) is sunlight scattered by interplanetary dust particles (IDPs) at optical wavelengths. The spatial distribution of IDPs in the Solar System may hold an important key to understanding the evolution of the Solar System and material transportation within it. The number density of IDPs can be expressed as $n(r) \sim r^{-α}$, and the exponent $α\sim 1.3$ was obtained by previous observations from interplanetary space by Helios 1/2 and Pioneer 10/11 in the 1970s and 1980s. However, no direct measurements of $α$ based on ZL observations from interplanetary space outside Earth's orbit have been performed since then. Here, we introduce initial results for the radial profile of the ZL at optical wavelengths observed over the range 0.76-1.06 au by ONC-T aboard the Hayabusa2# mission in 2021-2022. The ZL brightness we obtained is well reproduced by a model brightness, although there is a small excess of the observed ZL brightness over the model brightness at around 0.9 au. The radial power-law index we obtained is $α= 1.30 \pm 0.08$, which is consistent with previous results based on ZL observations. The dominant source of uncertainty arises from the uncertainty in estimating the diffuse Galactic light (DGL).
△ Less
Submitted 6 July, 2023; v1 submitted 13 March, 2023;
originally announced March 2023.
-
Hayabusa2 Extended Mission: New Voyage to Rendezvous with a Small Asteroid Rotating with a Short Period
Authors:
M. Hirabayashi,
Y. Mimasu,
N. Sakatani,
S. Watanabe,
Y. Tsuda,
T. Saiki,
S. Kikuchi,
T. Kouyama,
M. Yoshikawa,
S. Tanaka,
S. Nakazawa,
Y. Takei,
F. Terui,
H. Takeuchi,
A. Fujii,
T. Iwata,
K. Tsumura,
S. Matsuura,
Y. Shimaki,
S. Urakawa,
Y. Ishibashi,
S. Hasegawa,
M. Ishiguro,
D. Kuroda,
S. Okumura
, et al. (19 additional authors not shown)
Abstract:
Hayabusa2 is the Japanese Asteroid Return Mission and targeted the carbonaceous asteroid Ryugu, conducted by the Japan Aerospace Exploration Agency (JAXA). The goal of this mission was to conduct proximity operations including remote sensing observations, material sampling, and a Small Carry-On Impact experiment, as well as sample analyses. As of September 2020, the spacecraft is on the way back t…
▽ More
Hayabusa2 is the Japanese Asteroid Return Mission and targeted the carbonaceous asteroid Ryugu, conducted by the Japan Aerospace Exploration Agency (JAXA). The goal of this mission was to conduct proximity operations including remote sensing observations, material sampling, and a Small Carry-On Impact experiment, as well as sample analyses. As of September 2020, the spacecraft is on the way back to Earth with samples from Ryugu with no critical issues after the successful departure in November 2019. Here, we propose an extended mission in which the spacecraft will rendezvous with a small asteroid with ~30 m - ~40 m in diameter that is rotating at a spin period of ~10 min after an additional ~10-year cruise phase. We introduce that two scenarios are suitable for the extended mission. In the first scenario, the spacecraft will perform swing-by maneuvers at Venus once and Earth twice to arrive at asteroid 2001 AV43. In the second scenario, it will perform swing-by maneuvers at Earth twice to reach asteroid 1998 KY26. In both scenarios, the mission will continue until the early 2030s. JAXA recently released the decision that the spacecraft will rendezvous with 1998 KY26. This paper focuses on our scientific assessments of the two scenarios but leaves the decision process to go to 1998 KY26 for future reports. Rendezvous operations will be planned to detail the physical properties and surrounding environments of the target, one of the smallest elements of small planetary bodies. By achieving the planned operations, the mission will provide critical hints on the violent histories of collisions and accumulations of small bodies in the solar system. Furthermore, the established scientific knowledge and techniques will advance key technologies for planetary defense.
△ Less
Submitted 17 April, 2021;
originally announced April 2021.
