Showing 1–36 of 36 results for author: Hills, R

Progress in the Design of the Atacama Large Aperture Submillimeter Telescope

Authors: Tony Mroczkowski, Claudia Cicone, Matthias Reichert, Patricio Gallardo, Hans Kaercher, Richard Hills, Daniel Bok, Erik Dahl, Pierre Dubois-dit-Bonclaude, Aleksej Kiselev, Martin Timpe, Thomas Zimmerer, Simon Dicker, Mike Macintosh, Pamela Klaassen, Michael Niemack

Abstract: The Atacama Large Aperture Submillimeter Telescope (AtLAST) aims to be the premier next generation large diameter (50 meter) single dish observatory capable of observations across the millimeter/submillimeter spectrum, from 30~GHz to 1~THz. AtLAST will be sited in Chile at approximately 5100 meters above sea level, high in the Atacama Desert near Llano de Chajnantor. The novel rocking-chair telesc… ▽ More The Atacama Large Aperture Submillimeter Telescope (AtLAST) aims to be the premier next generation large diameter (50 meter) single dish observatory capable of observations across the millimeter/submillimeter spectrum, from 30~GHz to 1~THz. AtLAST will be sited in Chile at approximately 5100 meters above sea level, high in the Atacama Desert near Llano de Chajnantor. The novel rocking-chair telescope design allows for a unprecedentedly wide field of view (FoV) of 1-2$^\circ$ diameter, a large receiver cabin housing six major instruments, and high structural stability during fast scanning operations (up to $\sim 3^\circ$ per second in azimuth). Here we describe the current status of, and expected outcomes for, the antenna design study, which will be completed in 2024. △ Less

Submitted 21 August, 2023; originally announced August 2023.

Comments: Accepted for the URSI GASS 2023, Sapporo, Japan, 19-26 August 2023. 4 pages, 3 figures

Journal ref: 2023 XXXVth General Assembly and Scientific Symposium of the International Union of Radio Science (URSI GASS), Sapporo, Japan, 2023

The REACH radiometer for detecting the 21-cm hydrogen signal from redshift 7.5 to 28

Authors: E. de Lera Acedo, D. I. L. de Villiers, N. Razavi-Ghods, W. Handley, A. Fialkov, A. Magro, D. Anstey, H. T. J. Bevins, R. Chiello, J. Cumner, A. T. Josaitis, I. L. V. Roque, P. H. Sims, K. H. Scheutwinkel, P. Alexander, G. Bernardi, S. Carey, J. Cavillot, W. Croukamp, J. A. Ely, T. Gessey-Jones, Q. Gueuning, R. Hills, G. Kulkarni, R. Maiolino , et al. (9 additional authors not shown)

Abstract: Observations of the 21-cm line from primordial hydrogen promise to be one of the best tools to study the early epochs of the Universe: the Dark Ages, the Cosmic Dawn, and the subsequent Epoch of Reionization. In 2018, the EDGES experiment caught the attention of the cosmology community with a potential detection of an absorption feature in the sky-averaged radio spectrum centred at 78 MHz. The fea… ▽ More Observations of the 21-cm line from primordial hydrogen promise to be one of the best tools to study the early epochs of the Universe: the Dark Ages, the Cosmic Dawn, and the subsequent Epoch of Reionization. In 2018, the EDGES experiment caught the attention of the cosmology community with a potential detection of an absorption feature in the sky-averaged radio spectrum centred at 78 MHz. The feature is deeper than expected, and, if confirmed, would call for new physics. However, different groups have re-analyzed the EDGES data and questioned the reliability of the signal. The Radio Experiment for the Analysis of Cosmic Hydrogen (REACH) is a sky-averaged 21-cm experiment aiming at improving the current observations by tackling the issues faced by current instruments related to residual systematic signals in the data. The novel experimental approach focuses on detecting and jointly explaining these systematics together with the foregrounds and the cosmological signal using Bayesian statistics. To achieve this, REACH features simultaneous observations with two different antennas, an ultra wideband system (redshift range 7.5 to 28), and a receiver calibrator based on in-field measurements. Simulated observations forecast percent-level constraints on astrophysical parameters, potentially opening up a new window to the infant Universe. △ Less

Submitted 13 October, 2022; originally announced October 2022.

Comments: Publication date: 21 July 2022

Journal ref: Nature Astronomy 6, p 984 998, 2022

Optical design concept of the CMB-S4 large-aperture telescopes and cameras

Authors: Patricio A. Gallardo, Bradford Benson, John Carlstrom, Simon R. Dicker, Nick Emerson, Jon E. Gudmundsson, Richard Hills, Michele Limon, Jeff McMahon, Michael D. Niemack, Johanna M. Nagy, Stephen Padin, John Ruhl, Sara M. Simon, the CMB-S4 collaboration

Abstract: CMB-S4 -- the next-generation ground-based cosmic microwave background (CMB) experiment - will significantly advance the sensitivity of CMB measurements and improve our understanding of the origin and evolution of the universe. CMB-S4 will deploy large-aperture telescopes fielding hundreds of thousands of detectors at millimeter wavelengths. We present the baseline optical design concept of the la… ▽ More CMB-S4 -- the next-generation ground-based cosmic microwave background (CMB) experiment - will significantly advance the sensitivity of CMB measurements and improve our understanding of the origin and evolution of the universe. CMB-S4 will deploy large-aperture telescopes fielding hundreds of thousands of detectors at millimeter wavelengths. We present the baseline optical design concept of the large-aperture CMB-S4 telescopes, which consists of two optical configurations: (i) a new off-axis, three-mirror, free-form anastigmatic design and (ii) the existing coma-corrected crossed-Dragone design. We also present an overview of the optical configuration of the array of silicon optics cameras that will populate the focal plane with 85 diffraction-limited optics tubes covering up to 9 degrees of field of view, up to $1.1 \, \rm mm$ in wavelength. We describe the computational optimization methods that were put in place to implement the families of designs described here and give a brief update on the current status of the design effort. △ Less

Submitted 20 July, 2022; originally announced July 2022.

Snowmass 2021 CMB-S4 White Paper

Authors: Kevork Abazajian, Arwa Abdulghafour, Graeme E. Addison, Peter Adshead, Zeeshan Ahmed, Marco Ajello, Daniel Akerib, Steven W. Allen, David Alonso, Marcelo Alvarez, Mustafa A. Amin, Mandana Amiri, Adam Anderson, Behzad Ansarinejad, Melanie Archipley, Kam S. Arnold, Matt Ashby, Han Aung, Carlo Baccigalupi, Carina Baker, Abhishek Bakshi, Debbie Bard, Denis Barkats, Darcy Barron, Peter S. Barry , et al. (331 additional authors not shown)

Abstract: This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan. This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021. arXiv admin note: substantial text overlap with arXiv:1908.01062, arXiv:1907.04473

Radio antenna design for sky-averaged 21 cm cosmology experiments: the REACH case

Authors: J. Cumner, E. De Lera Acedo, D. I. L. de Villiers, D. Anstey, C. I. Kolitsidas, B. Gurdon, N. Fagnoni, P. Alexander, G. Bernardi, H. T. J. Bevins, S. Carey, J. Cavillot, R. Chiello, C. Craeye, W. Croukamp, J. A. Ely, A. Fialkov, T. Gessey-Jones, Q. Gueuning, W. Handley, R. Hills, A. T. Josaitis, G. Kulkarni, A. Magro, R. Maiolino , et al. (13 additional authors not shown)

Abstract: Following the reported detection of an absorption profile associated with the 21~cm sky-averaged signal from the Cosmic Dawn by the EDGES experiment in 2018, a number of experiments have been set up to verify this result. This paper discusses the design process used for global 21~cm experiments, focusing specifically on the Radio Experiment for the Analysis of Cosmic Hydrogen (REACH). This experim… ▽ More Following the reported detection of an absorption profile associated with the 21~cm sky-averaged signal from the Cosmic Dawn by the EDGES experiment in 2018, a number of experiments have been set up to verify this result. This paper discusses the design process used for global 21~cm experiments, focusing specifically on the Radio Experiment for the Analysis of Cosmic Hydrogen (REACH). This experiment will seek to understand and compensate for systematic errors present using detailed modelling and characterization of the instrumentation. There is detailed the quantitative figures of merit and numerical modelling used to assist the design process of the REACH dipole antenna (one of the 2 antenna designs for REACH Phase I). This design process produced a 2.5:1 frequency bandwidth dipole. The aim of this design was to balance spectral smoothness and low impedance reflections with the ability to describe and understand the antenna response to the sky signal to inform the critically important calibration during observation and data analysis. △ Less

Submitted 12 January, 2023; v1 submitted 21 September, 2021; originally announced September 2021.

Comments: 32 pages, 30 figures, to be submitted to the Journal of Astronomical Instrumentation

Holographic surface measurement system for the Fred Young Submillimeter Telescope

Authors: Xiaodong Ren, Pablo Astudillo, Urs U. Graf, Richard E. Hills, Sebastian Jorquera, Bojan Nikolic, Stephen C. Parshley, Nicolás Reyes, Lars Weikert

Abstract: We describe a system being developed for measuring the shapes of the mirrors of the Fred Young Submillimeter Telescope (FYST), now under construction for the CCAT Observatory. "Holographic" antenna-measuring techniques are an efficient and accurate way of measuring the surfaces of large millimeter-wave telescopes and they have the advantage of measuring the wave-front errors of the whole system un… ▽ More We describe a system being developed for measuring the shapes of the mirrors of the Fred Young Submillimeter Telescope (FYST), now under construction for the CCAT Observatory. "Holographic" antenna-measuring techniques are an efficient and accurate way of measuring the surfaces of large millimeter-wave telescopes and they have the advantage of measuring the wave-front errors of the whole system under operational conditions, e.g. at night on an exposed site. Applying this to FYST, however, presents significant challenges because of the high accuracy needed, the fact that the telescope consists of two large off-axis mirrors, and a requirement that measurements can be made without personnel present. We use a high-frequency (~300GHz) source which is relatively close to the telescope aperture (<1/100th of the Fresnel distance) to minimize atmospheric effects. The main receiver is in the receiver cabin and can be moved under remote control to different positions, so that the wave-front errors in different parts of the focal plane can be measured. A second receiver placed on the yoke provides a phase reference. The signals are combined in a digital cross-correlation spectrometer. Scanning the telescope provides a map of the complex beam pattern. The surface errors are found by inference, i.e. we make models of the reflectors with errors and calculate the patterns expected, and then iterate to find the best match to the data. To do this we have developed a fast and accurate method for calculating the patterns using the Kirchhoff-Fresnel formulation. This paper presents details of the design and outlines the results from simulations of the measurement and inference process. These indicate that a measurement accuracy of ~3 microns rms is achievable. △ Less

Submitted 15 March, 2021; originally announced March 2021.

Comments: Proceedings Volume 11445, Ground-based and Airborne Telescopes VIII SPIE Astronomical Telescopes + Instrumentation, 2020, Online Only Conference

Optical Design of PICO, a Concept for a Space Mission to Probe Inflation and Cosmic Origins

Authors: Karl Young, Marcelo Alvarez, Nicholas Battaglia, Jamie Bock, Julian Borrill, David Chuss, Brendan Crill, Jacques Delabrouille, Mark Devlin, Laura Fissel, Raphael Flauger, Daniel Green, Kris Gorski, Shaul Hanany, Richard Hills, Johannes Hubmayr, Bradley Johnson, Bill Jones, Lloyd Knox, Al Kogut, Charles Lawrence, Tomotake Matsumura, Jim McGuire, Jeff McMahon, Roger O'Brient , et al. (6 additional authors not shown)

Abstract: The Probe of Inflation and Cosmic Origins (PICO) is a probe-class mission concept currently under study by NASA. PICO will probe the physics of the Big Bang and the energy scale of inflation, constrain the sum of neutrino masses, measure the growth of structures in the universe, and constrain its reionization history by making full sky maps of the cosmic microwave background with sensitivity 80 ti… ▽ More The Probe of Inflation and Cosmic Origins (PICO) is a probe-class mission concept currently under study by NASA. PICO will probe the physics of the Big Bang and the energy scale of inflation, constrain the sum of neutrino masses, measure the growth of structures in the universe, and constrain its reionization history by making full sky maps of the cosmic microwave background with sensitivity 80 times higher than the Planck space mission. With bands at 21-799 GHz and arcmin resolution at the highest frequencies, PICO will make polarization maps of Galactic synchrotron and dust emission to observe the role of magnetic fields in Milky Way's evolution and star formation. We discuss PICO's optical system, focal plane, and give current best case noise estimates. The optical design is a two-reflector optimized open-Dragone design with a cold aperture stop. It gives a diffraction limited field of view (DLFOV) with throughput of 910 square cm sr at 21 GHz. The large 82 square degree DLFOV hosts 12,996 transition edge sensor bolometers distributed in 21 frequency bands and maintained at 0.1 K. We use focal plane technologies that are currently implemented on operating CMB instruments including three-color multi-chroic pixels and multiplexed readouts. To our knowledge, this is the first use of an open-Dragone design for mm-wave astrophysical observations, and the only monolithic CMB instrument to have such a broad frequency coverage. With current best case estimate polarization depth of 0.65 microK(CMB}-arcmin over the entire sky, PICO is the most sensitive CMB instrument designed to date. △ Less

Submitted 3 August, 2018; originally announced August 2018.

Comments: 12 pages, 8 Figures, Submitted to SPIE, Proceedings of the 2018 Conference on Astronomical Telescopes and Instrumentation

High-Precision Scanning Water Vapor Radiometers for Cosmic Microwave Background Site Characterization and Comparison

Authors: D. Barkats, R. Bowens-Rubin, W. H. Clay, T. Culp, R. Hills, J. M. Kovac, N. A. Larsen, S. Paine, C. D. Sheehy, A. G. Vieregg

Abstract: The compelling science case for the observation of B-mode polarization in the cosmic microwave background (CMB) is driving the CMB community to expand the observed sky fraction, either by extending survey sizes or by deploying receivers to potential new northern sites. For ground-based CMB instruments, poorly-mixed atmospheric water vapor constitutes the primary source of short-term sky noise. Thi… ▽ More The compelling science case for the observation of B-mode polarization in the cosmic microwave background (CMB) is driving the CMB community to expand the observed sky fraction, either by extending survey sizes or by deploying receivers to potential new northern sites. For ground-based CMB instruments, poorly-mixed atmospheric water vapor constitutes the primary source of short-term sky noise. This results in short-timescale brightness fluctuations, which must be rejected by some form of modulation. To maximize the sensitivity of ground-based CMB observations, it is useful to understand the effects of atmospheric water vapor over timescales and angular scales relevant for CMB polarization measurements. To this end, we have undertaken a campaign to perform a coordinated characterization of current and potential future observing sites using scanning 183 GHz water vapor radiometers (WVRs). So far, we have deployed two identical WVR units; one at the South Pole, Antarctica, and the other at Summit Station, Greenland. The former site has a long heritage of ground-based CMB observations and is the current location of the Bicep/Keck Array telescopes as well as the South Pole Telescope. The latter site, though less well characterized, is under consideration as a northern-hemisphere location for future CMB receivers. Data collection from this campaign began in January 2016 at South Pole and July 2016 at Summit Station. Data analysis is ongoing to reduce the data to a single spatial and temporal statistic that can be used for one-to-one site comparison. △ Less

Submitted 3 August, 2018; originally announced August 2018.

Comments: Published in Proc. SPIE. Presented at SPIE Astronomical Telescopes and Instrumentation Conference 10708: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI, June 2018. 10 pages, 11 figures

The optical design of the six-meter CCAT-prime and Simons Observatory telescopes

Authors: Stephen C. Parshley, Michael D. Niemack, Richard Hills, Simon R. Dicker, Rolando Dünner, Jens Erler, Patricio A. Gallardo, Jon E. Gudmundsson, Terry Herter, Brian J. Koopman, Michele Limon, Frederick T. Matsuda, Philip Mauskopf, Dominik A. Riechers, Gordon J. Stacey, Eve M. Vavagiakis

Abstract: A common optical design for a coma-corrected, 6-meter aperture, crossed-Dragone telescope has been adopted for the CCAT-prime telescope of CCAT Observatory, Inc., and for the Large Aperture Telescope of the Simons Observatory. Both are to be built in the high altitude Atacama Desert in Chile for submillimeter and millimeter wavelength observations, respectively. The design delivers a high throughp… ▽ More A common optical design for a coma-corrected, 6-meter aperture, crossed-Dragone telescope has been adopted for the CCAT-prime telescope of CCAT Observatory, Inc., and for the Large Aperture Telescope of the Simons Observatory. Both are to be built in the high altitude Atacama Desert in Chile for submillimeter and millimeter wavelength observations, respectively. The design delivers a high throughput, relatively flat focal plane, with a field of view 7.8 degrees in diameter for 3 mm wavelengths, and the ability to illuminate >100k diffraction-limited beams for < 1 mm wavelengths. The optics consist of offset reflecting primary and secondary surfaces arranged in such a way as to satisfy the Mizuguchi-Dragone criterion, suppressing first-order astigmatism and maintaining high polarization purity. The surface shapes are perturbed from their standard conic forms in order to correct coma aberrations. We discuss the optical design, performance, and tolerancing sensitivity. More information about CCAT-prime can be found at ccatobservatory.org and about Simons Observatory at simonsobservatory.org. △ Less

Submitted 17 July, 2018; originally announced July 2018.

Comments: Event: SPIE Astronomical Telescopes + Instrumentation, 2018, Austin, Texas, USA; Proceedings Volume 10700, Ground-based and Airborne Telescopes VII; 1070041 (2018)

CCAT-prime: a novel telescope for submillimeter astronomy

Authors: Stephen C. Parshley, Jörg Kronshage, James Blair, Terry Herter, Mike Nolta, Gordon J. Stacey, Andrew Bazarko, Frank Bertoldi, Ricardo Bustos, Donald B. Campbell, Scott Chapman, Nicholas Cothard, Mark Devlin, Jens Erler, Michel Fich, Patricio A. Gallardo, Riccardo Giovanelli, Urs Graf, Scott Gramke, Martha P. Haynes, Richard Hills, Michele Limon, Jeffrey G. Mangum, Jeff McMahon, Michael D. Niemack , et al. (6 additional authors not shown)

Abstract: The CCAT-prime telescope is a 6-meter aperture, crossed-Dragone telescope, designed for millimeter and sub-millimeter wavelength observations. It will be located at an altitude of 5600 meters, just below the summit of Cerro Chajnantor in the high Atacama region of Chile. The telescope's unobscured optics deliver a field of view of almost 8 degrees over a large, flat focal plane, enabling it to acc… ▽ More The CCAT-prime telescope is a 6-meter aperture, crossed-Dragone telescope, designed for millimeter and sub-millimeter wavelength observations. It will be located at an altitude of 5600 meters, just below the summit of Cerro Chajnantor in the high Atacama region of Chile. The telescope's unobscured optics deliver a field of view of almost 8 degrees over a large, flat focal plane, enabling it to accommodate current and future instrumentation fielding >100k diffraction-limited beams for wavelengths less than a millimeter. The mount is a novel design with the aluminum-tiled mirrors nested inside the telescope structure. The elevation housing has an integrated shutter that can enclose the mirrors, protecting them from inclement weather. The telescope is designed to co-host multiple instruments over its nominal 15 year lifetime. It will be operated remotely, requiring minimum maintenance and on-site activities due to the harsh working conditions on the mountain. The design utilizes nickel-iron alloy (Invar) and carbon-fiber-reinforced polymer (CFRP) materials in the mirror support structure, achieving a relatively temperature-insensitive mount. We discuss requirements, specifications, critical design elements, and the expected performance of the CCAT-prime telescope. The telescope is being built by CCAT Observatory, Inc., a corporation formed by an international partnership of universities. More information about CCAT and the CCAT-prime telescope can be found at www.ccatobservatory.org. △ Less

Submitted 17 July, 2018; originally announced July 2018.

Comments: Event: SPIE Astronomical Telescope + Instrumentation, 2018, Austin, Texas, USA; Proceedings Volume 10700, Ground-based and Airborne Telescopes VII; 107005X (2018)

Concerns about Modelling of the EDGES Data

Authors: Richard Hills, Girish Kulkarni, P. Daniel Meerburg, Ewald Puchwein

Abstract: It is predicted that the spectrum of radio emission from the whole sky should show a dip arising from the action of the light from the first stars on the hydrogen atoms in the surrounding gas, which causes the 21-cm line to appear in absorption against the cosmic microwave background. Bowman et al. 2018 identified a broad flat-bottomed absorption profile centred at 78 MHz, which could be this feat… ▽ More It is predicted that the spectrum of radio emission from the whole sky should show a dip arising from the action of the light from the first stars on the hydrogen atoms in the surrounding gas, which causes the 21-cm line to appear in absorption against the cosmic microwave background. Bowman et al. 2018 identified a broad flat-bottomed absorption profile centred at 78 MHz, which could be this feature, although the depth of the profile is much larger than expected. We have examined the modelling process they used and find that their data implies unphysical parameters for the foreground emission and also that their solution is not unique in the sense that we found other simple formulations for the signal that are different in shape but that also fit their data. We argue that this calls into question the interpretation of these data as an unambiguous detection of the cosmological 21-cm absorption signature. △ Less

Submitted 24 January, 2020; v1 submitted 3 May, 2018; originally announced May 2018.

Comments: 6 pages, 2 figures; Accepted version of article published December 19, 2018. Full edited version (incl. supplementary information) available through Springer Nature at https://doi.org/10.1038/s41586-018-0796-5

Journal ref: Nature 564, E32-E34 (2018)

Observing the Sun with the Atacama Large Millimeter-submillimeter Array (ALMA): Fast-Scan Single-Dish Mapping

Authors: S. M. White, K. Iwai, N. M. Phillips, R. E. Hills, A. Hirota, P. Yagoubov, G. Siringo, M. Shimojo, T. S. Bastian, A. S. Hales, T. Sawada, S. Asayama, M. Sugimoto, R. G. Marson, W. Kawasaki, E. Muller, T. Nakazato, K. Sugimoto, R. Brajsa, I. Skokic, M. Barta, S. Kim, A. Remijan, I. de Gregorio, S. A. Corder , et al. (9 additional authors not shown)

Abstract: The Atacama Large Millimeter-submillimeter Array (ALMA) radio telescope has commenced science observations of the Sun starting in late 2016. Since the Sun is much larger than the field of view of individual ALMA dishes, the ALMA interferometer is unable to measure the background level of solar emission when observing the solar disk. The absolute temperature scale is a critical measurement for much… ▽ More The Atacama Large Millimeter-submillimeter Array (ALMA) radio telescope has commenced science observations of the Sun starting in late 2016. Since the Sun is much larger than the field of view of individual ALMA dishes, the ALMA interferometer is unable to measure the background level of solar emission when observing the solar disk. The absolute temperature scale is a critical measurement for much of ALMA solar science, including the understanding of energy transfer through the solar atmosphere, the properties of prominences, and the study of shock heating in the chromosphere. In order to provide an absolute temperature scale, ALMA solar observing will take advantage of the remarkable fast-scanning capabilities of the ALMA 12m dishes to make single-dish maps of the full Sun. This article reports on the results of an extensive commissioning effort to optimize the mapping procedure, and it describes the nature of the resulting data. Amplitude calibration is discussed in detail: a path that utilizes the two loads in the ALMA calibration system as well as sky measurements is described and applied to commissioning data. Inspection of a large number of single-dish datasets shows significant variation in the resulting temperatures, and based on the temperature distributions we derive quiet-Sun values at disk center of 7300 K at lambda=3 mm and 5900 K at lambda=1.3 mm. These values have statistical uncertainties of order 100 K, but systematic uncertainties in the temperature scale that may be significantly larger. Example images are presented from two periods with very different levels of solar activity. At a resolution of order 25 arcsec, the 1.3 mm wavelength images show temperatures on the disk that vary over about a 2000 K range. △ Less

Submitted 12 May, 2017; originally announced May 2017.

Comments: Solar Physics, accepted: 24 pages, 13 figures

Observing the Sun with Atacama Large Millimeter/submillimeter Array (ALMA): High Resolution Interferometric Imaging

Authors: M. Shimojo, T. S. Bastian, A. S. Hales, S. M. White, K. Iwai, R. E. Hills, A. Hirota, N. M. Phillips, T. Sawada, P. Yagoubov, G. Siringo, S. Asayama, M. Sugimoto, R. Brajsa, I. Skokic, M. Barta, S. Kim, I. de Gregorio, S. A. Corder, H. S. Hudson, S. Wedemeyer, D. E. Gary, B. De Pontieu, M. Loukitcheva, G. D. Fleishman , et al. (3 additional authors not shown)

Abstract: Observations of the Sun at millimeter and submillimeter wavelengths offer a unique probe into the structure, dynamics, and heating of the chromosphere; the structure of sunspots; the formation and eruption of prominences and filaments; and energetic phenomena such as jets and flares. High-resolution observations of the Sun at millimeter and submillimeter wavelengths are challenging due to the inte… ▽ More Observations of the Sun at millimeter and submillimeter wavelengths offer a unique probe into the structure, dynamics, and heating of the chromosphere; the structure of sunspots; the formation and eruption of prominences and filaments; and energetic phenomena such as jets and flares. High-resolution observations of the Sun at millimeter and submillimeter wavelengths are challenging due to the intense, extended, low- contrast, and dynamic nature of emission from the quiet Sun, and the extremely intense and variable nature of emissions associated with energetic phenomena. The Atacama Large Millimeter/submillimeter Array (ALMA) was designed with solar observations in mind. The requirements for solar observations are significantly different from observations of sidereal sources and special measures are necessary to successfully carry out this type of observations. We describe the commissioning efforts that enable the use of two frequency bands, the 3 mm band (Band 3) and the 1.25 mm band (Band 6), for continuum interferometric-imaging observations of the Sun with ALMA. Examples of high-resolution synthesized images obtained using the newly commissioned modes during the solar commissioning campaign held in December 2015 are presented. Although only 30 of the eventual 66 ALMA antennas were used for the campaign, the solar images synthesized from the ALMA commissioning data reveal new features of the solar atmosphere that demonstrate the potential power of ALMA solar observations. The ongoing expansion of ALMA and solar-commissioning efforts will continue to enable new and unique solar observing capabilities. △ Less

Submitted 26 April, 2017; v1 submitted 11 April, 2017; originally announced April 2017.

Comments: 22 pages, 12 figures, accepted for publication in Solar Physics

Journal ref: Solar Physics Vol. 292: 87. (2017)

ALMA Long Baseline Campaigns: Phase Characteristics of Atmosphere at Long Baselines in the Millimeter and Submillimeter Wavelengths

Authors: Satoki Matsushita, Yoshiharu Asaki, Edward B. Fomalont, Koh-Ichiro Morita, Denis Barkats, Richard E. Hills, Ryohei Kawabe, Luke T. Maud, Bojan Nikolic, Remo P. J. Tilanus, Catherine Vlahakis, Nicholas D. Whyborn

Abstract: This paper presents the first detailed investigation of the characteristics of mm/submm phase fluctuation and phase correction methods obtained using ALMA with baseline lengths up to ~15 km. Most of the spatial structure functions (SSFs) show that the phase fluctuation increases as a function of baseline length, with a power-law slope of ~0.6. In many cases, we find that the slope becomes shallowe… ▽ More This paper presents the first detailed investigation of the characteristics of mm/submm phase fluctuation and phase correction methods obtained using ALMA with baseline lengths up to ~15 km. Most of the spatial structure functions (SSFs) show that the phase fluctuation increases as a function of baseline length, with a power-law slope of ~0.6. In many cases, we find that the slope becomes shallower (average of ~0.2-0.3) at baseline lengths longer than ~1 km, namely showing a turn-over in SSF. The phase correction method using water vapor radiometers (WVRs) works well, especially for the cases where PWV >1 mm, which reduces the degree of phase fluctuations by a factor of two in many cases. However, phase fluctuations still remain after the WVR phase correction, suggesting the existence of other turbulent constituent that cause the phase fluctuation. This is supported by occasional SSFs that do not exhibit any turn-over; these are only seen when the PWV is low or after WVR phase correction. This means that the phase fluctuation caused by this turbulent constituent is inherently smaller than that caused by water vapor. Since there is no turn-over in the SSF up to the maximum baseline length of ~15 km, this turbulent constituent must have scale height of 10 km or more, and thus cannot be water vapor, whose scale height is around 1 km. This large scale height turbulent constituent is likely to be water ice or a dry component. Excess path length fluctuation after the WVR phase correction at a baseline length of 10 km is large (>200 micron), which is significant for high frequency (>450 GHz or <700 micron) observations. These results suggest the need for an additional phase correction method, such as fast switching, in addition to the WVR phase correction. We simulated the fast switching, and the result suggests that it works well, with shorter cycle times linearly improving the coherence. △ Less

Submitted 11 January, 2017; originally announced January 2017.

Comments: 12 pages, 7 figures. PASP, in press

An Overview of the 2014 ALMA Long Baseline Campaign

Authors: ALMA Partnership, E. B. Fomalont, C. Vlahakis, S. Corder, A. Remijan, D. Barkats, R. Lucas, T. R. Hunter, C. L. Brogan, Y. Asaki, S. Matsushita, W. R. F. Dent, R. E. Hills, N. Phillips, A. M. S. Richards, P. Cox, R. Amestica, D. Broguiere, W. Cotton, A. S. Hales, R. Hiriart, A. Hirota, J. A. Hodge, C. M. V. Impellizzeri, J. Kern , et al. (224 additional authors not shown)

Abstract: A major goal of the Atacama Large Millimeter/submillimeter Array (ALMA) is to make accurate images with resolutions of tens of milliarcseconds, which at submillimeter (submm) wavelengths requires baselines up to ~15 km. To develop and test this capability, a Long Baseline Campaign (LBC) was carried out from September to late November 2014, culminating in end-to-end observations, calibrations, and… ▽ More A major goal of the Atacama Large Millimeter/submillimeter Array (ALMA) is to make accurate images with resolutions of tens of milliarcseconds, which at submillimeter (submm) wavelengths requires baselines up to ~15 km. To develop and test this capability, a Long Baseline Campaign (LBC) was carried out from September to late November 2014, culminating in end-to-end observations, calibrations, and imaging of selected Science Verification (SV) targets. This paper presents an overview of the campaign and its main results, including an investigation of the short-term coherence properties and systematic phase errors over the long baselines at the ALMA site, a summary of the SV targets and observations, and recommendations for science observing strategies at long baselines. Deep ALMA images of the quasar 3C138 at 97 and 241 GHz are also compared to VLA 43 GHz results, demonstrating an agreement at a level of a few percent. As a result of the extensive program of LBC testing, the highly successful SV imaging at long baselines achieved angular resolutions as fine as 19 mas at ~350 GHz. Observing with ALMA on baselines of up to 15 km is now possible, and opens up new parameter space for submm astronomy. △ Less

Submitted 24 April, 2015; v1 submitted 19 April, 2015; originally announced April 2015.

Comments: 11 pages, 7 figures, 2 tables; accepted for publication in the Astrophysical Journal Letters; this version with small changes to affiliations

Journal ref: The Astrophysical Journal Letters, volume 808, issue 1, article id. L1, 11 pp. (2015)

ALMA Long Baseline Observations of the Strongly Lensed Submillimeter Galaxy HATLAS J090311.6+003906 at z=3.042

Authors: ALMA Partnership, C. Vlahakis, T. R. Hunter, J. A. Hodge, L. M. Pérez, P. Andreani, C. L. Brogan, P. Cox, S. Martin, M. Zwaan, S. Matsushita, W. R. F. Dent, C. M. V. Impellizzeri, E. B. Fomalont, Y. Asaki, D. Barkats, R. E. Hills, A. Hirota, R. Kneissl, E. Liuzzo, R. Lucas, N. Marcelino, K. Nakanishi, N. Phillips, A. M. S. Richards , et al. (56 additional authors not shown)

Abstract: We present initial results of very high resolution Atacama Large Millimeter/submillimeter Array (ALMA) observations of the $z$=3.042 gravitationally lensed galaxy HATLAS J090311.6+003906 (SDP.81). These observations were carried out using a very extended configuration as part of Science Verification for the 2014 ALMA Long Baseline Campaign, with baselines of up to 15 km. We present continuum imagi… ▽ More We present initial results of very high resolution Atacama Large Millimeter/submillimeter Array (ALMA) observations of the $z$=3.042 gravitationally lensed galaxy HATLAS J090311.6+003906 (SDP.81). These observations were carried out using a very extended configuration as part of Science Verification for the 2014 ALMA Long Baseline Campaign, with baselines of up to 15 km. We present continuum imaging at 151, 236 and 290 GHz, at unprecedented angular resolutions as fine as 23 milliarcseconds (mas), corresponding to an un-magnified spatial scale of ~180 pc at z=3.042. The ALMA images clearly show two main gravitational arc components of an Einstein ring, with emission tracing a radius of ~1.5". We also present imaging of CO(10-9), CO(8-7), CO(5-4) and H2O line emission. The CO emission, at an angular resolution of ~170 mas, is found to broadly trace the gravitational arc structures but with differing morphologies between the CO transitions and compared to the dust continuum. Our detection of H2O line emission, using only the shortest baselines, provides the most resolved detection to date of thermal H2O emission in an extragalactic source. The ALMA continuum and spectral line fluxes are consistent with previous Plateau de Bure Interferometer and Submillimeter Array observations despite the impressive increase in angular resolution. Finally, we detect weak unresolved continuum emission from a position that is spatially coincident with the center of the lens, with a spectral index that is consistent with emission from the core of the foreground lensing galaxy. △ Less

Submitted 3 April, 2015; v1 submitted 9 March, 2015; originally announced March 2015.

Comments: 9 pages, 5 figures and 3 tables, accepted for publication in the Astrophysical Journal Letters

Journal ref: The Astrophysical Journal Letters, Volume 808, Issue 1, article id. L4, 10 pp. (2015)

ALMA Observations of Asteroid 3 Juno at 60 Kilometer Resolution

Authors: ALMA Partnership, T. R. Hunter, R. Kneissl, A. Moullet, C. L. Brogan, E. B. Fomalont, C. Vlahakis, Y. Asaki, D. Barkats, W. R. F. Dent, R. Hills, A. Hirota, J. A. Hodge, C. M. V. Impellizzeri, E. Liuzzo, R. Lucas, N. Marcelino, S. Matsushita, K. Nakanishi, L. M. Perez, N. Phillips, A. M. S. Richards, I. Toledo, R. Aladro, D. Broguiere , et al. (45 additional authors not shown)

Abstract: We present Atacama Large Millimeter/submillimeter Array (ALMA) 1.3 mm continuum images of the asteroid 3 Juno obtained with an angular resolution of 0.042 arcseconds (60 km at 1.97 AU). The data were obtained over a single 4.4 hr interval, which covers 60% of the 7.2 hr rotation period, approximately centered on local transit. A sequence of ten consecutive images reveals continuous changes in the… ▽ More We present Atacama Large Millimeter/submillimeter Array (ALMA) 1.3 mm continuum images of the asteroid 3 Juno obtained with an angular resolution of 0.042 arcseconds (60 km at 1.97 AU). The data were obtained over a single 4.4 hr interval, which covers 60% of the 7.2 hr rotation period, approximately centered on local transit. A sequence of ten consecutive images reveals continuous changes in the asteroid's profile and apparent shape, in good agreement with the sky projection of the three-dimensional model of the Database of Asteroid Models from Inversion Techniques. We measure a geometric mean diameter of 259pm4 km, in good agreement with past estimates from a variety of techniques and wavelengths. Due to the viewing angle and inclination of the rotational pole, the southern hemisphere dominates all of the images. The median peak brightness temperature is 215pm13 K, while the median over the whole surface is 197pm15 K. With the unprecedented resolution of ALMA, we find that the brightness temperature varies across the surface with higher values correlated to the subsolar point and afternoon areas, and lower values beyond the evening terminator. The dominance of the subsolar point is accentuated in the final four images, suggesting a reduction in the thermal inertia of the regolith at the corresponding longitudes, which are possibly correlated to the location of the putative large impact crater. These results demonstrate ALMA's potential to resolve thermal emission from the surface of main belt asteroids, and to measure accurately their position, geometric shape, rotational period, and soil characteristics. △ Less

Submitted 6 April, 2015; v1 submitted 9 March, 2015; originally announced March 2015.

Comments: 8 pages, 3 figures, 2 tables, accepted for publication in the Astrophysical Journal Letters

Journal ref: The Astrophysical Journal Letters, Volume 808, Issue 1, article id. L2, 9 pp. (2015)

First Results from High Angular Resolution ALMA Observations Toward the HL Tau Region

Authors: ALMA Partnership, C. L. Brogan, L. M. Perez, T. R. Hunter, W. R. F. Dent, A. S. Hales, R. Hills, S. Corder, E. B. Fomalont, C. Vlahakis, Y. Asaki, D. Barkats, A. Hirota, J. A. Hodge, C. M. V. Impellizzeri, R. Kneissl, E. Liuzzo, R. Lucas, N. Marcelino, S. Matsushita, K. Nakanishi, N. Phillips, A. M. S. Richards, I. Toledo, R. Aladro , et al. (60 additional authors not shown)

Abstract: We present Atacama Large Millimeter/submillimeter Array (ALMA) observations from the 2014 Long Baseline Campaign in dust continuum and spectral line emission from the HL Tau region. The continuum images at wavelengths of 2.9, 1.3, and 0.87 mm have unprecedented angular resolutions of 0.075 arcseconds (10 AU) to 0.025 arcseconds (3.5 AU), revealing an astonishing level of detail in the circumstella… ▽ More We present Atacama Large Millimeter/submillimeter Array (ALMA) observations from the 2014 Long Baseline Campaign in dust continuum and spectral line emission from the HL Tau region. The continuum images at wavelengths of 2.9, 1.3, and 0.87 mm have unprecedented angular resolutions of 0.075 arcseconds (10 AU) to 0.025 arcseconds (3.5 AU), revealing an astonishing level of detail in the circumstellar disk surrounding the young solar analogue HL Tau, with a pattern of bright and dark rings observed at all wavelengths. By fitting ellipses to the most distinct rings, we measure precise values for the disk inclination (46.72pm0.05 degrees) and position angle (+138.02pm0.07 degrees). We obtain a high-fidelity image of the 1.0 mm spectral index ($α$), which ranges from $α\sim2.0$ in the optically-thick central peak and two brightest rings, increasing to 2.3-3.0 in the dark rings. The dark rings are not devoid of emission, we estimate a grain emissivity index of 0.8 for the innermost dark ring and lower for subsequent dark rings, consistent with some degree of grain growth and evolution. Additional clues that the rings arise from planet formation include an increase in their central offsets with radius and the presence of numerous orbital resonances. At a resolution of 35 AU, we resolve the molecular component of the disk in HCO+ (1-0) which exhibits a pattern over LSR velocities from 2-12 km/s consistent with Keplerian motion around a ~1.3 solar mass star, although complicated by absorption at low blue-shifted velocities. We also serendipitously detect and resolve the nearby protostars XZ Tau (A/B) and LkHa358 at 2.9 mm. △ Less

Submitted 6 April, 2015; v1 submitted 9 March, 2015; originally announced March 2015.

Comments: 11 pages, 5 figures, 2 tables, accepted for publication in the Astrophysical Journal Letters

Journal ref: The Astrophysical Journal Letters, Volume 808, Issue 1, article id. L3, 10 pp. (2015)

Fast single-dish scans of the Sun using ALMA

Authors: Neil Phillips, Richard Hills, Tim Bastian, Hugh Hudson, Ralph Marson, Sven Wedemeyer

Abstract: We have implemented control and data-taking software that makes it possible to scan the beams of individual ALMA antennas to perform quite complex patterns while recording the signals at high rates. We conducted test observations of the Sun in September and December, 2014. The data returned have excellent quality; in particular they allow us to characterize the noise and signal fluctuations presen… ▽ More We have implemented control and data-taking software that makes it possible to scan the beams of individual ALMA antennas to perform quite complex patterns while recording the signals at high rates. We conducted test observations of the Sun in September and December, 2014. The data returned have excellent quality; in particular they allow us to characterize the noise and signal fluctuations present in this kind of observation. The fast-scan experiments included both Lissajous patterns covering rectangular areas, and double-circle patterns of the whole disk of the Sun and smaller repeated maps of specific disk-shaped targets. With the latter we find that we can achieve roughly Nyquist sampling of the Band~6 (230~GHz) beam in 60~s over a region 300$"$ in diameter. These maps show a peak-to-peak brightness-temperature range of up to 1000~K, while the time-series variability at any given point appears to be of order 0.5 percent RMS over times of a few minutes. We thus expect to be able to separate the noise contributions due to transparency fluctuations from variations in the Sun itself. Such timeseries have many advantages, in spite of the non-interferometric observations. In particular such data should make it possible to observe microflares in active regions and nanoflares in any part of the solar disk and low corona. △ Less

Submitted 21 February, 2015; originally announced February 2015.

Comments: Presented at "Revolution in Astronomy with ALMA - the third year -", Tokyo, December 2014

Karl G. Jansky Very Large Array observations of cold dust and molecular gas in starbursting quasar host galaxies at z~4.5

Authors: J. Wagg, C. L. Carilli, M. Aravena, P. Cox, L. Lentati, R. Maiolino, R. G. McMahon, D. Riechers, F. Walter, P. Andreani, R. Hills, A. Wolfe

Abstract: We present Karl G. Jansky Very Large Array (VLA) observations of 44 GHz continuum and CO J=2-1 line emission in BR1202-0725 at z=4.7 (a starburst galaxy and quasar pair) and BRI1335-0417 at z=4.4 (also hosting a quasar). With the full 8 GHz bandwidth capabilities of the upgraded VLA, we study the (rest-frame) 250 GHz thermal dust continuum emission for the first time along with the cold molecular… ▽ More We present Karl G. Jansky Very Large Array (VLA) observations of 44 GHz continuum and CO J=2-1 line emission in BR1202-0725 at z=4.7 (a starburst galaxy and quasar pair) and BRI1335-0417 at z=4.4 (also hosting a quasar). With the full 8 GHz bandwidth capabilities of the upgraded VLA, we study the (rest-frame) 250 GHz thermal dust continuum emission for the first time along with the cold molecular gas traced by the Low-J CO line emission. The measured CO J=2-1 line luminosities of BR1202-0725 are L'(CO) = (8.7+/-0.8)x10^10 K km/s pc^2 and L'(CO) = (6.0+/-0.5)x10^10 K km/s pc^2 for the submm galaxy (SMG) and quasar, which are equal to previous measurements of the CO J=5-4 line luminosities implying thermalized line emission and we estimate a combined cold molecular gas mass of ~9x10^10 Msun. In BRI1335-0417 we measure L'(CO) = (7.3+/-0.6)x10^10 K km/s pc^2. We detect continuum emission in the SMG BR1202-0725 North (S(44GHz) = 51+/-6 microJy), while the quasar is detected with S(44GHz) = 24+/-6 microJy and in BRI1335-0417 we measure S(44GHz) = 40+/-7 microJy. Combining our continuum observations with previous data at (rest-frame) far-infrared and cm-wavelengths, we fit three component models in order to estimate the star-formation rates. This spectral energy distribution fitting suggests that the dominant contribution to the observed 44~GHz continuum is thermal dust emission, while either thermal free-free or synchrotron emission contributes less than 30%. △ Less

Submitted 6 January, 2014; originally announced January 2014.

Comments: 16 pages , 4 figures. Accepted for publication in ApJ

Phase Correction for ALMA with 183 GHz Water Vapour Radiometers

Authors: Bojan Nikolic, Rosie C. Bolton, Sarah F. Graves, Richard E. Hills, John S. Richer

Abstract: Fluctuating properties of the atmosphere, and in particular its water vapour content, give rise to phase fluctuations of astronomical signals which, if uncorrected, lead to rapid deterioration of performance of (sub)-mm interferometers on long baselines. The Atacama Large Millimetre/submillimeter Array (ALMA) uses a 183 GHz Water Vapour Radiometer (WVR) system to help correct these fluctuations an… ▽ More Fluctuating properties of the atmosphere, and in particular its water vapour content, give rise to phase fluctuations of astronomical signals which, if uncorrected, lead to rapid deterioration of performance of (sub)-mm interferometers on long baselines. The Atacama Large Millimetre/submillimeter Array (ALMA) uses a 183 GHz Water Vapour Radiometer (WVR) system to help correct these fluctuations and provide much improved performance on long baselines and at high frequencies. Here we describe the design of the overall ALMA WVR system, the choice of design parameters and the data processing strategy. We also present results of initial tests that demonstrate both the large improvement in phase stability that can be achieved and the very low contribution to phase noise from the WVRs. Finally, we describe briefly the main limiting factors to the accuracy of phase correction seen in these initial tests; namely, the degrading influence of cloud and the residual phase fluctuations that are most likely to be due to variations in the density of the dry component of the air △ Less

Submitted 25 February, 2013; originally announced February 2013.

Comments: 11 pages, 7 figures. Accepted for publication by A&A

ALMA Temporal Phase Stability and the Effectiveness of Water Vapor Radiometer

Authors: S. Matsushita, K. -I. Morita, D. Barkats, R. E. Hills, E. Fomalont, B. Nikolic

Abstract: Atacama Large Millimeter/submillimeter Array (ALMA) will be the world largest mm/submm interferometer, and currently the Early Science is ongoing, together with the commissioning and science verification (CSV). Here we present a study of the temporal phase stability of the entire ALMA system from antennas to the correlator. We verified the temporal phase stability of ALMA using data, taken during… ▽ More Atacama Large Millimeter/submillimeter Array (ALMA) will be the world largest mm/submm interferometer, and currently the Early Science is ongoing, together with the commissioning and science verification (CSV). Here we present a study of the temporal phase stability of the entire ALMA system from antennas to the correlator. We verified the temporal phase stability of ALMA using data, taken during the last two years of CSV activities. The data consist of integrations on strong point sources (i.e., bright quasars) at various frequency bands, and at various baseline lengths (up to 600 m). From the observations of strong quasars for a long time (from a few tens of minutes, up to an hour), we derived the 2-point Allan Standard Deviation after the atmospheric phase correction using the 183 GHz Water Vapor Radiometer (WVR) installed in each 12 m antenna, and confirmed that the phase stability of all the baselines reached the ALMA specification. Since we applied the WVR phase correction to all the data mentioned above, we also studied the effectiveness of the WVR phase correction at various frequencies, baseline lengths, and weather conditions. The phase stability often improves a factor of 2 - 3 after the correction, and sometimes a factor of 7 improvement can be obtained. However, the corrected data still displays an increasing phase fluctuation as a function of baseline length, suggesting that the dry component (e.g., N2 and O2) in the atmosphere also contributes the phase fluctuation in the data, although the imperfection of the WVR phase correction cannot be ruled out at this moment. △ Less

Submitted 18 October, 2012; originally announced October 2012.

Comments: Proc. SPIE 8444-125, in press (7 pages, 4 figures, 1 table)

[CII] line emission in massive star-forming galaxies at z=4.7

Authors: J. Wagg, T. Wiklind, C. L. Carilli, D. Espada, A. Peck, D. Riechers, F. Walter, A. Wootten, M. Aravena, D. Barkats, J. R. Cortes, R. Hills, J. Hodge, C. M V. Impellizzeri, D. Iono, A. Leroy, S. Martin, M. G. Rawlings, R. Maiolino, R. G. McMahon, K. S. Scott, E. Villard, C. Vlahakis

Abstract: We present Atacama Large Millimeter/submillimeter Array (ALMA) observations of the [CII] 157.7micron fine structure line and thermal dust continuum emission from a pair of gas-rich galaxies at z=4.7, BR1202-0725. This system consists of a luminous quasar host galaxy and a bright submm galaxy (SMG), while a fainter star-forming galaxy is also spatially coincident within a 4" (25 kpc) region. All th… ▽ More We present Atacama Large Millimeter/submillimeter Array (ALMA) observations of the [CII] 157.7micron fine structure line and thermal dust continuum emission from a pair of gas-rich galaxies at z=4.7, BR1202-0725. This system consists of a luminous quasar host galaxy and a bright submm galaxy (SMG), while a fainter star-forming galaxy is also spatially coincident within a 4" (25 kpc) region. All three galaxies are detected in the submm continuum, indicating FIR luminosities in excess of 10^13 Lsun for the two most luminous objects. The SMG and the quasar host galaxy are both detected in [CII] line emission with luminosities, L([CII]) = (10.0 +/- 1.5)x10^9 Lsun and L([CII]) = (6.5+/-1.0)x10^9 Lsun, respectively. We estimate a luminosity ratio, L([CII])/L(FIR) = (8.3+/-1.2)x10^-4 for the starburst SMG to the North, and L([CII])/L(FIR) = (2.5+/-0.4)x10^-4 for the quasar host galaxy, in agreement with previous high-redshift studies that suggest lower [CII]-to-FIR luminosity ratios in quasars than in starburst galaxies. The third fainter object with a flux density, S(340GHz) = 1.9+/-0.3 mJy, is coincident with a Ly-Alpha emitter and is detected in HST ACS F775W and F814W images but has no clear counterpart in the H-band. Even if this third companion does not lie at a similar redshift to BR1202-0725, the quasar and the SMG represent an overdensity of massive, infrared luminous star-forming galaxies within 1.3 Gyr of the Big Bang. △ Less

Submitted 18 May, 2012; v1 submitted 15 May, 2012; originally announced May 2012.

Comments: 14 pages, accepted for publication in ApJ Letters

Planck early results. VI. The High Frequency Instrument data processing

Authors: Planck HFI Core Team, P. A. R. Ade, N. Aghanim, R. Ansari, M. Arnaud, M. Ashdown, J. Aumont, A. J. Banday, M. Bartelmann, J. G. Bartlett, E. Battaner, K. Benabed, A. Benoît, J. -P. Bernard, M. Bersanelli, J. J. Bock, J. R. Bond, J. Borrill, F. R. Bouchet, F. Boulanger, T. Bradshaw, M. Bucher, J. -F. Cardoso, G. Castex, A. Catalano , et al. (141 additional authors not shown)

Abstract: We describe the processing of the 336 billion raw data samples from the High Frequency Instrument (HFI) which we performed to produce six temperature maps from the first 295 days of Planck-HFI survey data. These maps provide an accurate rendition of the sky emission at 100, 143, 217, 353, 545 and 857 GHz with an angular resolution ranging from 9.9 to 4.4^2. The white noise level is around 1.5 μK… ▽ More We describe the processing of the 336 billion raw data samples from the High Frequency Instrument (HFI) which we performed to produce six temperature maps from the first 295 days of Planck-HFI survey data. These maps provide an accurate rendition of the sky emission at 100, 143, 217, 353, 545 and 857 GHz with an angular resolution ranging from 9.9 to 4.4^2. The white noise level is around 1.5 μK degree or less in the 3 main CMB channels (100--217GHz). The photometric accuracy is better than 2% at frequencies between 100 and 353 GHz and around 7% at the two highest frequencies. The maps created by the HFI Data Processing Centre reach our goals in terms of sensitivity, resolution, and photometric accuracy. They are already sufficiently accurate and well-characterised to allow scientific analyses which are presented in an accompanying series of early papers. At this stage, HFI data appears to be of high quality and we expect that with further refinements of the data processing we should be able to achieve, or exceed, the science goals of the Planck project. △ Less

Submitted 23 December, 2011; v1 submitted 11 January, 2011; originally announced January 2011.

Comments: Replaced by the accepted version for publication, as part of a package of papers describing first results of the Planck mission The paper with figures at full resolution and full color tables can also be downloaded from the ESA site http://www.rssd.esa.int/Planck

Report number: Planck2011-1.6

Journal ref: A&A, Volume 536, December 2011

Planck early results: first assessment of the High Frequency Instrument in-flight performance

Authors: Planck HFI Core Team, P. A. R. Ade, N. Aghanim, R. Ansari, M. Arnaud, M. Ashdown, J. Aumont, A. J. Banday, M. Bartelmann, J. G. Bartlett, E. Battaner, K. Benabed, A. Benot, J. -P. Bernard, M. Bersanelli, R. Bhatia, J. J. Bock, J. R. Bond, J. Borrill, F. R. Bouchet, F. Boulanger, T. Bradshaw, E. Brelle, M. Bucher, P. Camus , et al. (141 additional authors not shown)

Abstract: The Planck High Frequency Instrument (HFI) is designed to measure the temperature and polarization anisotropies of the Cosmic Microwave Background and galactic foregrounds in six wide bands centered at 100, 143, 217, 353, 545 and 857 GHz at an angular resolution of 10' (100 GHz), 7' (143 GHz), and 5' (217 GHz and higher). HFI has been operating flawlessly since launch on 14 May 2009. The bolometer… ▽ More The Planck High Frequency Instrument (HFI) is designed to measure the temperature and polarization anisotropies of the Cosmic Microwave Background and galactic foregrounds in six wide bands centered at 100, 143, 217, 353, 545 and 857 GHz at an angular resolution of 10' (100 GHz), 7' (143 GHz), and 5' (217 GHz and higher). HFI has been operating flawlessly since launch on 14 May 2009. The bolometers cooled to 100 mK as planned. The settings of the readout electronics, such as the bolometer bias current, that optimize HFI's noise performance on orbit are nearly the same as the ones chosen during ground testing. Observations of Mars, Jupiter, and Saturn verified both the optical system and the time response of the detection chains. The optical beams are close to predictions from physical optics modeling. The time response of the detection chains is close to pre-launch measurements. The detectors suffer from an unexpected high flux of cosmic rays related to low solar activity. Due to the redundancy of Planck's observations strategy, the removal of a few percent of data contaminated by glitches does not affect significantly the sensitivity. The cosmic rays heat up significantly the bolometer plate and the modulation on periods of days to months of the heat load creates a common drift of all bolometer signals which do not affect the scientific capabilities. Only the high energy cosmic rays showers induce inhomogeneous heating which is a probable source of low frequency noise. △ Less

Submitted 11 January, 2011; originally announced January 2011.

Comments: Submitted to A&A. 22 pages, 6 tables, 21 figures. One of a set of simultaneous papers for the Planck Mission

HARP/ACSIS: A submillimetre spectral imaging system on the James Clerk Maxwell Telescope

Authors: J. V. Buckle, R. E. Hills, H. Smith, W. R. F. Dent, G. Bell, E. I. Curtis, R. Dace, H. Gibson, S. F. Graves, J. Leech, J. S. Richer, R. Williamson, S. Withington, G. Yassin, R. Bennett, P. Hastings, I. Laidlaw, J. F. Lightfoot, T. Burgess, P. E. Dewdney, G. Hovey, A. G. Willis, R. Redman, B. Wooff, D. S. Berry , et al. (13 additional authors not shown)

Abstract: This paper describes a new Heterodyne Array Receiver Programme (HARP) and Auto-Correlation Spectral Imaging System (ACSIS) that have recently been installed and commissioned on the James Clerk Maxwell Telescope (JCMT). The 16-element focal-plane array receiver, operating in the submillimetre from 325 to 375 GHz, offers high (three-dimensional) mapping speeds, along with significant improvements… ▽ More This paper describes a new Heterodyne Array Receiver Programme (HARP) and Auto-Correlation Spectral Imaging System (ACSIS) that have recently been installed and commissioned on the James Clerk Maxwell Telescope (JCMT). The 16-element focal-plane array receiver, operating in the submillimetre from 325 to 375 GHz, offers high (three-dimensional) mapping speeds, along with significant improvements over single-detector counterparts in calibration and image quality. Receiver temperatures are $\sim$120 K across the whole band and system temperatures of $\sim$300K are reached routinely under good weather conditions. The system includes a single-sideband filter so these are SSB figures. Used in conjunction with ACSIS, the system can produce large-scale maps rapidly, in one or more frequency settings, at high spatial and spectral resolution. Fully-sampled maps of size 1 square degree can be observed in under 1 hour. The scientific need for array receivers arises from the requirement for programmes to study samples of objects of statistically significant size, in large-scale unbiased surveys of galactic and extra-galactic regions. Along with morphological information, the new spectral imaging system can be used to study the physical and chemical properties of regions of interest. Its three-dimensional imaging capabilities are critical for research into turbulence and dynamics. In addition, HARP/ACSIS will provide highly complementary science programmes to wide-field continuum studies, and produce the essential preparatory work for submillimetre interferometers such as the SMA and ALMA. △ Less

Submitted 21 July, 2009; originally announced July 2009.

Comments: MNRAS Accepted 2009 July 2. 18 pages, 25 figures and 6 tables

The eSMA: description and first results

Authors: Sandrine Bottinelli, Ken H. Young, Richard Chamberlin, Remo P. J. Tilanus, Mark A. Gurwell, Dave J. Wilner, Hiroko Shinnaga, Hiroshige Yoshida, Per Friberg, Huib Jan van Langevelde, Ewine F. van Dishoeck, Michiel R. Hogerheijde, A. Meredith Hughes, Robert D. Christensen, Richard E. Hills, John S. Richer, Emily Curtis, the eSMA commissioning team

Abstract: The eSMA ("extended SMA") combines the SMA, JCMT and CSO into a single facility, providing enhanced sensitivity and spatial resolution owing to the increased collecting area at the longest baselines. Until ALMA early science observing (2011), the eSMA will be the facility capable of the highest angular resolution observations at 345 GHz. The gain in sensitivity and resolution will bring new insi… ▽ More The eSMA ("extended SMA") combines the SMA, JCMT and CSO into a single facility, providing enhanced sensitivity and spatial resolution owing to the increased collecting area at the longest baselines. Until ALMA early science observing (2011), the eSMA will be the facility capable of the highest angular resolution observations at 345 GHz. The gain in sensitivity and resolution will bring new insights in a variety of fields, such as protoplanetary/transition disks, high-mass star formation, solar system bodies, nearby and high-z galaxies. Therefore the eSMA is an important facility to prepare the grounds for ALMA and train scientists in the techniques. Over the last two years, and especially since November 2006, there has been substantial progress toward making the eSMA into a working interferometer. In particular, (i) new 345-GHz receivers, that match the capabilities of the SMA system, were installed at the JCMT and CSO; (ii) numerous tests have been performed for receiver, correlator and baseline calibrations in order to determine and take into account the effects arising from the differences between the three types of antennas; (iii) first fringes at 345 GHz were obtained on August 30 2007, and the array has entered the science-verification stage. We report on the characteristics of the eSMA and its measured performance at 230 GHz and that expected at 345 GHz. We also present the results of the commissioning and some initial science-verification observations, including the first absorption measurement of the C/CO ratio in a galaxy at z=0.89, located along the line of sight to the lensed quasar PKS1830-211, and on the imaging of the vibrationally excited HCN line towards IRC+10216. △ Less

Submitted 19 August, 2008; originally announced August 2008.

Comments: 12 pages, 7 figures, paper number 7012-12, to appear in Proceedings of SPIE vol. 7012: "Ground-based and Airborne Telescopes II", SPIE conference on Astronomical Instrumentation, Marseille, 23-28 June 2008

The Arcminute Microkelvin Imager

Authors: AMI Consortium, :, J. T. L. Zwart, R. W. Barker, P. Biddulph, D. Bly, R. C. Boysen, A. R. Brown, C. Clementson, M. Crofts, T. L. Culverhouse, J. Czeres, R. J. Dace, M. L. Davies, R. D'Alessandro, P. Doherty, K. Duggan, J. A. Ely, M. Felvus, F. Feroz, W. Flynn, T. M. O. Franzen, J. Geisbüsch, R. Génova-Santos, K. J. B. Grainge , et al. (35 additional authors not shown)

Abstract: The Arcminute Microkelvin Imager is a pair of interferometer arrays operating with six frequency channels spanning 13.9-18.2 GHz, with very high sensitivity to angular scales 30''-10'. The telescope is aimed principally at Sunyaev-Zel'dovich imaging of clusters of galaxies. We discuss the design of the telescope and describe and explain its electronic and mechanical systems. The Arcminute Microkelvin Imager is a pair of interferometer arrays operating with six frequency channels spanning 13.9-18.2 GHz, with very high sensitivity to angular scales 30''-10'. The telescope is aimed principally at Sunyaev-Zel'dovich imaging of clusters of galaxies. We discuss the design of the telescope and describe and explain its electronic and mechanical systems. △ Less

Submitted 15 July, 2008; originally announced July 2008.

Comments: 15 pages, 13 figures. Submitted to MNRAS

Implementation of an Optimised Cassegrain System for Radio Telescopes

Authors: C. M. Holler, R. E. Hills, M. E. Jones, K. Grainge, T. Kaneko

Abstract: We present the antenna design for a radio interferometer, the Arcminute Microkelvin Imager, together with its beam pattern measurement. Our aim was to develop a low-cost system with high aperture efficiency and low ground-spill across the frequency range 12-18GHz. We use a modified cassegrain system consisting of a commercially-available paraboloidal primary mirror with a diameter of 3.7m, and a… ▽ More We present the antenna design for a radio interferometer, the Arcminute Microkelvin Imager, together with its beam pattern measurement. Our aim was to develop a low-cost system with high aperture efficiency and low ground-spill across the frequency range 12-18GHz. We use a modified cassegrain system consisting of a commercially-available paraboloidal primary mirror with a diameter of 3.7m, and a shaped secondary mirror. The secondary mirror is oversized with respect to a ray-optics design and has a surface that is bent towards the primary near its outer edge using a square term for the shaping. The antennas are simple to manufacture and therefore their cost is low. The design increased the antenna gain by approximately 10 per cent compared to a normal Cassegrain system while still maintaining low contamination from ground-spill and using a simple design for the horn. △ Less

Submitted 6 December, 2007; originally announced December 2007.

Comments: 4 pages, 7 figures, to be published in MNRAS

Journal ref: Monthly Notices of the Royal Astronomical Society, 384: 1207-1210 (2008)

The James Clerk Maxwell Telescope Legacy Survey of Nearby Star-forming Regions in the Gould Belt

Authors: D. Ward-Thompson, J. Di Francesco, J. Hatchell, M. R. Hogerheijde, P. Bastien, S. Basu, I. Bonnell, J. Bowey, C. Brunt, J. Buckle, H. Butner, B. Cavanagh, A. Chrysostomou, E. Curtis, C. J. Davis, W. R. F. Dent, E. van Dishoeck, M. G. Edmunds, M. Fich, J. Fiege, L. Fissel, P. Friberg, R. Friesen, W. Frieswijk, G. A. Fuller , et al. (37 additional authors not shown)

Abstract: This paper describes a James Clerk Maxwell Telescope (JCMT) legacy survey that has been awarded roughly 500 hrs of observing time to be carried out from 2007 to 2009. In this survey we will map with SCUBA-2 (Submillimetre Common User Bolometer Array 2) almost all of the well-known low-mass and intermediate-mass star-forming regions within 0.5 kpc that are accessible from the JCMT. Most of these… ▽ More This paper describes a James Clerk Maxwell Telescope (JCMT) legacy survey that has been awarded roughly 500 hrs of observing time to be carried out from 2007 to 2009. In this survey we will map with SCUBA-2 (Submillimetre Common User Bolometer Array 2) almost all of the well-known low-mass and intermediate-mass star-forming regions within 0.5 kpc that are accessible from the JCMT. Most of these locations are associated with the Gould Belt. From these observations we will produce a flux-limited snapshot of star formation near the Sun, providing a legacy of images, as well as point-source and extended-source catalogues, over almost 700 square degrees of sky. The resulting images will yield the first catalogue of prestellar and protostellar sources selected by submillimetre continuum emission, and should increase the number of known sources by more than an order of magnitude. We will also obtain CO maps with the array receiver HARP (Heterodyne Array Receiver Programme), in three CO isotopologues, of a large typical sample of prestellar and protostellar sources. We will then map the brightest hundred sources with the SCUBA-2 polarimeter (POL-2), producing the first statistically significant set of polarization maps in the submillimetre. The images and source catalogues will be a powerful reference set for astronomers, providing a detailed legacy archive for future telescopes, including ALMA, Herschel and JWST. △ Less

Submitted 2 July, 2007; originally announced July 2007.

Comments: 60 page manuscript, inc. 18 figures. Accepted by PASP

Out-Of-Focus Holography at the Green Bank Telescope

Authors: B. Nikolic, R. M. Prestage, D. S. Balser, C. J. Chandler, R. E. Hills

Abstract: We describe phase-retrieval holography measurements of the 100-m diameter Green Bank Telescope using astronomical sources and an astronomical receiver operating at a wavelength of 7 mm. We use the technique with parameterization of the aperture in terms of Zernike polynomials and employing a large defocus, as described by Nikolic, Hills & Richer (2006). Individual measurements take around 25 min… ▽ More We describe phase-retrieval holography measurements of the 100-m diameter Green Bank Telescope using astronomical sources and an astronomical receiver operating at a wavelength of 7 mm. We use the technique with parameterization of the aperture in terms of Zernike polynomials and employing a large defocus, as described by Nikolic, Hills & Richer (2006). Individual measurements take around 25 minutes and from the resulting beam maps (which have peak signal to noise ratios of 200:1) we show that it is possible to produce low-resolution maps of the wavefront errors with accuracy around a hundredth of a wavelength. Using such measurements over a wide range of elevations, we have calculated a model for the wavefront-errors due to the uncompensated gravitational deformation of the telescope. This model produces a significant improvement at low elevations, where these errors are expected to be the largest; after applying the model, the aperture efficiency is largely independent of elevation. We have also demonstrated that the technique can be used to measure and largely correct for thermal deformations of the antenna, which often exceed the uncompensated gravitational deformations during daytime observing. We conclude that the aberrations induced by gravity and thermal effects are large-scale and the technique used here is particularly suitable for measuring such deformations in large millimetre wave radio telescopes. △ Less

Submitted 31 March, 2007; v1 submitted 10 December, 2006; originally announced December 2006.

Comments: 10 pages, 7 figures (accepted by Astronomy & Astrophysics)

Measurement of Antenna Surfaces from In- and Out-Of-Focus Beam Maps using Astronomical Sources

Authors: B. Nikolic, R. E. Hills, J. S. Richer

Abstract: We present a technique for the accurate estimation of large-scale errors in an antenna surface using astronomical sources and detectors. The technique requires several out-of-focus images of a compact source and the signal-to-noise ratio needs to be good but not unreasonably high. For a given pattern of surface errors, the expected form of such images can be calculated directly. We show that it… ▽ More We present a technique for the accurate estimation of large-scale errors in an antenna surface using astronomical sources and detectors. The technique requires several out-of-focus images of a compact source and the signal-to-noise ratio needs to be good but not unreasonably high. For a given pattern of surface errors, the expected form of such images can be calculated directly. We show that it is possible to solve the inverse problem of finding the surface errors from the images in a stable manner using standard numerical techniques. To do this we describe the surface error as a linear combination of a suitable set of basis functions (we use Zernike polynomials). We present simulations illustrating the technique and in particular we investigate the effects of receiver noise and pointing errors. Measurements of the 15-m James Clerk Maxwell telescope made using this technique are presented as an example. The key result is that good measurements of errors on large spatial scales can be obtained if the input images have a signal-to-noise ratio of order 100 or more. The important advantage of this technique over transmitter-based holography is that it allows measurements at arbitrary elevation angles, so allowing one to characterise the large scale deformations in an antenna as a function of elevation. △ Less

Submitted 31 March, 2007; v1 submitted 9 December, 2006; originally announced December 2006.

Comments: 6 pages, 5 figures (accepted by Astronomy & Astrophysics)

High-significance Sunyaev-Zel'dovich measurement: Abell 1914 seen with the Arcminute Microkelvin Imager

Authors: AMI Collaboration, R. Barker, P. Biddulph, D. Bly, R. Boysen, A. Brown, C. Clementson, M. Crofts, T. Culverhouse, J. Czeres, R. Dace, R. D'Alessandro, P. Doherty, P. Duffett-Smith, K. Duggan, J. Ely, M. Felvus, W. Flynn, J. Geisbuesch, K. Grainge, W. Grainger, D. Hammet, R. Hills, M. Hobson, C. Holler , et al. (25 additional authors not shown)

Abstract: We report the first detection of a Sunyaev-Zel'dovich (S-Z) decrement with the Arcminute Microkelvin Imager (AMI). We have made commissioning observations towards the cluster A1914 and have measured an integrated flux density of -8.61 mJy in a uv-tapered map with noise level 0.19 mJy/beam. We find that the spectrum of the decrement, measured in the six channels between 13.5-18GHz, is consistent… ▽ More We report the first detection of a Sunyaev-Zel'dovich (S-Z) decrement with the Arcminute Microkelvin Imager (AMI). We have made commissioning observations towards the cluster A1914 and have measured an integrated flux density of -8.61 mJy in a uv-tapered map with noise level 0.19 mJy/beam. We find that the spectrum of the decrement, measured in the six channels between 13.5-18GHz, is consistent with that expected for a S-Z effect. The sensitivity of the telescope is consistent with the figures used in our simulations of cluster surveys with AMI. △ Less

Submitted 8 September, 2005; originally announced September 2005.

Comments: 5 pages, 6 figures, submitted to MNRAS Letters

Interferometric Observations of the Nuclear Region of Arp220 at Submillimeter Wavelengths

Authors: M. C. Wiedner, C. D. Wilson, A. Harrison, R. E. Hills, O. P. Lay, J. E. Carlstrom

Abstract: We report the first submillimeter interferometric observations of an ultraluminous infrared galaxy. We observed Arp220 in the CO J=3-2 line and 342GHz continuum with the single baseline CSO-JCMT interferometer consisting of the Caltech Submillimeter Observatory (CSO) and the James Clerk Maxwell Telescope (JCMT). Models were fit to the measured visibilities to constrain the structure of the sourc… ▽ More We report the first submillimeter interferometric observations of an ultraluminous infrared galaxy. We observed Arp220 in the CO J=3-2 line and 342GHz continuum with the single baseline CSO-JCMT interferometer consisting of the Caltech Submillimeter Observatory (CSO) and the James Clerk Maxwell Telescope (JCMT). Models were fit to the measured visibilities to constrain the structure of the source. The morphologies of the CO J=3-2 line and 342GHz continuum emission are similar to those seen in published maps at 230 and 110GHz. We clearly detect a binary source separated by about 1 arcsec in the east-west direction in the 342GHz continuum. The CO J=3-2 visibility amplitudes, however, indicate a more complicated structure, with evidence for a compact binary at some velocities and rather more extended structure at others. Less than 30% of the total CO J=3-2 emission is detected by the interferometer, which implies the presence of significant quantities of extended gas. We also obtained single-dish CO J=2-1, CO J=3-2 and HCN J=4-3 spectra. The HCN J=4-3 spectrum, unlike the CO spectra, is dominated by a single redshifted peak. The HCN J=4-3/CO J=3-2, HCN J=4-3/HCN J=1-0 and CO J=3-2/2-1 line ratios are larger in the redshifted (eastern) source, which suggests that the two sources may have different physical conditions. This result might be explained by the presence of an intense starburst that has begun to deplete or disperse the densest gas in the western source, while the eastern source harbors undispersed high density gas. △ Less

Submitted 7 August, 2002; originally announced August 2002.

Comments: 17 pages, 9 figures, 4 Tables. accepted by ApJ

Journal ref: Astrophys.J. 581 (2002) 229-240

Dust and gas in luminous infrared galaxies - results from SCUBA observations

Authors: U. Lisenfeld, K. G. Isaak, R. Hills

Abstract: We present new data taken at 850 $μ$m with SCUBA at the JCMT for a sample of 19 luminous infrared galaxies. Fourteen galaxies were detected. We have used these data, together with fluxes at 25, 60 and 100 $μ$m from IRAS, to model the dust emission. We find that the emission from most galaxies can be described by an optically thin, single temperature dust model with an exponent of the dust extinc… ▽ More We present new data taken at 850 $μ$m with SCUBA at the JCMT for a sample of 19 luminous infrared galaxies. Fourteen galaxies were detected. We have used these data, together with fluxes at 25, 60 and 100 $μ$m from IRAS, to model the dust emission. We find that the emission from most galaxies can be described by an optically thin, single temperature dust model with an exponent of the dust extinction coefficient ($k_λ\propto λ^{-β}$) of $β\simeq 1.5 - 2$. A lower $β\simeq 1$ is required to model the dust emission from two of the galaxies, Arp 220 and NGC 4418. We discuss various possibilities for this difference and conclude that the most likely is a high dust opacity. In addition, we compare the molecular gas mass derived from the dust emission, $M_{dust}$, with the molecular gas mass derived from the CO emission, $M_{CO}$, and find that $M_{CO}$ is on average a factor 3 higher than $M_{dust}$. △ Less

Submitted 8 October, 1999; v1 submitted 2 July, 1999; originally announced July 1999.

Comments: 10 pages, 6 figures, latex, with MN-macros, accepted by MNRAS - revised version (changed flux values for some galaxies)

Accretion Disks Around Class 0 Protostars: The Case of VLA 1623

Authors: R. E. Pudritz, C. D. Wilson, J. E. Carlstrom, O. P. Lay, R. E. Hills, D. Ward-Thompson

Abstract: Continuum emission at 220 and 355 GHz from the prototype Class 0 source VLA 1623 has been detected using the JCMT-CSO interferometer. Gaussian fits to the data place an upper limit of 70 AU on the half-width half-maximum radius of the emission, which implies an upper limit of ~175 AU for the cutoff radius of the circumstellar disk in the system. In the context of existing collapse models, this d… ▽ More Continuum emission at 220 and 355 GHz from the prototype Class 0 source VLA 1623 has been detected using the JCMT-CSO interferometer. Gaussian fits to the data place an upper limit of 70 AU on the half-width half-maximum radius of the emission, which implies an upper limit of ~175 AU for the cutoff radius of the circumstellar disk in the system. In the context of existing collapse models, this disk could be magnetically supported on the largest scales and have an age of ~6x10^4 yr, consistent with previous suggestions that Class 0 sources are quite young. The innermost region of the disk within ~6 AU is likely to be in centrifugal support, which is likely large enough to provide a drive for the outflow according to current theoretical models. Alternatively, if 175 AU corresponds to the centrifugal radius of the disk, the age of the system is ~2x10^5 yr, closer to age estimates for Class I sources. △ Less

Submitted 13 August, 1996; originally announced August 1996.

Comments: 14 pages, aastex, 2 postscript figures; accepted for publication in ApJ Letters; also available at http://www.physics.mcmaster.ca/Wilson_Preprints