Showing 1–12 of 12 results for author: Guest, S

SPICE Connection Mosaics to link the Sun's surface and the heliosphere

Authors: T. Varesano, D. M. Hassler, N. Zambrana Prado, J. Plowman, G. Del Zanna, S. Parenti, H. E. Mason, A. Giunta, F. Auchere, M. Carlsson, A. Fludra, H. Peter, D. Muller, D. Williams, R. Aznar Cuadrado, K. Barczynski, E. Buchlin, M. Caldwell, T. Fredvik, T. Grundy, S. Guest, L. Harra, M. Janvier, T. Kucera, S. Leeks , et al. (6 additional authors not shown)

Abstract: We present an analysis of the first connection mosaic made by the SPICE instrument on board of the ESA / NASA Solar Orbiter mission on March 2nd, 2022. The data will be used to map coronal composition that will be compared with in-situ measurements taken by SWA/HIS to establish the coronal origin of the solar wind plasma observed at Solar Orbiter. The SPICE spectral lines were chosen to have varyi… ▽ More We present an analysis of the first connection mosaic made by the SPICE instrument on board of the ESA / NASA Solar Orbiter mission on March 2nd, 2022. The data will be used to map coronal composition that will be compared with in-situ measurements taken by SWA/HIS to establish the coronal origin of the solar wind plasma observed at Solar Orbiter. The SPICE spectral lines were chosen to have varying sensitivity to the First Ionization Potential (FIP) effect, and therefore the radiances of the spectral lines will vary significantly depending on whether the elemental composition is coronal or photospheric. We investigate the link between the behavior of sulfur with the hypothesis that Alfvén waves drive FIP fractionation above the chromosphere. We perform temperature diagnostics using line ratios and Emission Measure (EM) loci, and compute relative FIP biases using three different approaches (two line ratio (2LR), ratios of linear combinations of spectral lines (LCR), and differential emission measure (DEM) inversion) to perform composition diagnostics in the corona. We then compare the SPICE composition analysis and EUI data of the potential solar wind source regions to the SWA / HIS data products. Radiance maps are extracted from SPICE spectral data cubes, with values matching previous observations. We find isothermal plasma of around LogT = 5.8 for the active region loops targeted, and that higher FIP-bias values are present at the footpoints of the coronal loops associated with two active regions. Comparing the results with the SWA/HIS data products encourages us to think that Solar Orbiter was connected to a source of slow solar wind during this observation campaign. We demonstrate FIP fractionation in observations of the upper chromosphere and transition region, emphasized by the behavior of the intermediate-FIP element sulfur. △ Less

Submitted 12 February, 2024; v1 submitted 2 August, 2023; originally announced August 2023.

Comments: 20 pages, 19 figures, submitted to A&A on August 3rd, accepted on February 12th, 2024

Journal ref: A&A 685, A146 (2024)

A multiple spacecraft detection of the 2 April 2022 M-class flare and filament eruption during the first close Solar Orbiter perihelion

Authors: M. Janvier, S. Mzerguat, P. R. Young, É. Buchlin, A. Manou, G. Pelouze, D. M. Long, L. Green, A. Warmuth, F. Schuller, P. Démoulin, D. Calchetti, F. Kahil, L. Bellot Rubio, S. Parenti, S. Baccar, K. Barczynski, L. K. Harra, L. A. Hayes, W. T. Thompson, D. Müller, D. Baker, S. Yardley, D. Berghmans, C. Verbeeck , et al. (34 additional authors not shown)

Abstract: The Solar Orbiter mission completed its first remote-sensing observation windows in the spring of 2022. On 2/4/2022, an M-class flare followed by a filament eruption was seen both by the instruments on board the mission and from several observatories in Earth's orbit. The complexity of the observed features is compared with the predictions given by the standard flare model in 3D. We use the observ… ▽ More The Solar Orbiter mission completed its first remote-sensing observation windows in the spring of 2022. On 2/4/2022, an M-class flare followed by a filament eruption was seen both by the instruments on board the mission and from several observatories in Earth's orbit. The complexity of the observed features is compared with the predictions given by the standard flare model in 3D. We use the observations from a multi-view dataset, which includes EUV imaging to spectroscopy and magnetic field measurements. These data come from IRIS, SDO, Hinode, as well as several instruments on Solar Orbiter. Information given by SDO/HMI and Solar Orbiter PHI/HRT shows that a parasitic polarity emerging underneath the filament is responsible for bringing the flux rope to an unstable state. As the flux rope erupts, Hinode/EIS captures blue-shifted emission in the transition region and coronal lines in the northern leg of the flux rope prior to the flare peak. Solar Orbiter SPICE captures the whole region, complementing the Doppler diagnostics of the filament eruption. Analyses of the formation and evolution of a complex set of flare ribbons and loops show that the parasitic emerging bipole plays an important role in the evolution of the flaring region. While the analysed data are overall consistent with the standard flare model, the present particular magnetic configuration shows that surrounding magnetic activity such as nearby emergence needs to be taken into account to fully understand the processes at work. This filament eruption is the first to be covered from different angles by spectroscopic instruments, and provides an unprecedented diagnostic of the multi-thermal structures present before and during the flare. This dataset of an eruptive event showcases the capabilities of coordinated observations with the Solar Orbiter mission. △ Less

Submitted 5 July, 2023; originally announced July 2023.

Comments: Accepted for publication in the Astronomy & Astrophysics special edition "Solar Orbiter First Results (Nominal Mission Phase)" (23/05/2023)

Journal ref: A&A 677, A130 (2023)

Slow Solar Wind Connection Science during Solar Orbiter's First Close Perihelion Passage

Authors: Stephanie L. Yardley, Christopher J. Owen, David M. Long, Deborah Baker, David H. Brooks, Vanessa Polito, Lucie M. Green, Sarah Matthews, Mathew Owens, Mike Lockwood, David Stansby, Alexander W. James, Gherado Valori, Alessandra Giunta, Miho Janvier, Nawin Ngampoopun, Teodora Mihailescu, Andy S. H. To, Lidia van Driel-Gesztelyi, Pascal Demoulin, Raffaella D'Amicis, Ryan J. French, Gabriel H. H. Suen, Alexis P. Roulliard, Rui F. Pinto , et al. (54 additional authors not shown)

Abstract: The Slow Solar Wind Connection Solar Orbiter Observing Plan (Slow Wind SOOP) was developed to utilise the extensive suite of remote sensing and in situ instruments on board the ESA/NASA Solar Orbiter mission to answer significant outstanding questions regarding the origin and formation of the slow solar wind. The Slow Wind SOOP was designed to link remote sensing and in situ measurements of slow w… ▽ More The Slow Solar Wind Connection Solar Orbiter Observing Plan (Slow Wind SOOP) was developed to utilise the extensive suite of remote sensing and in situ instruments on board the ESA/NASA Solar Orbiter mission to answer significant outstanding questions regarding the origin and formation of the slow solar wind. The Slow Wind SOOP was designed to link remote sensing and in situ measurements of slow wind originating at open-closed field boundaries. The SOOP ran just prior to Solar Orbiter's first close perihelion passage during two remote sensing windows (RSW1 and RSW2) between 2022 March 3-6 and 2022 March 17-22, while Solar Orbiter was at a heliocentric distance of 0.55-0.51 and 0.38-0.34 au from the Sun, respectively. Coordinated observation campaigns were also conducted by Hinode and IRIS. The magnetic connectivity tool was used, along with low latency in situ data, and full-disk remote sensing observations, to guide the target pointing of Solar Orbiter. Solar Orbiter targeted an active region complex during RSW1, the boundary of a coronal hole, and the periphery of a decayed active region during RSW2. Post-observation analysis using the magnetic connectivity tool along with in situ measurements from MAG and SWA/PAS, show that slow solar wind, with velocities between 210 and 600 km/s, arrived at the spacecraft originating from two out of the three of the target regions. The Slow Wind SOOP, despite presenting many challenges, was very successful, providing a blueprint for planning future observation campaigns that rely on the magnetic connectivity of Solar Orbiter. △ Less

Submitted 20 April, 2023; v1 submitted 19 April, 2023; originally announced April 2023.

Comments: 24 pages, 10 figures

The wide-field, multiplexed, spectroscopic facility WEAVE: Survey design, overview, and simulated implementation

Authors: Shoko Jin, Scott C. Trager, Gavin B. Dalton, J. Alfonso L. Aguerri, J. E. Drew, Jesús Falcón-Barroso, Boris T. Gänsicke, Vanessa Hill, Angela Iovino, Matthew M. Pieri, Bianca M. Poggianti, D. J. B. Smith, Antonella Vallenari, Don Carlos Abrams, David S. Aguado, Teresa Antoja, Alfonso Aragón-Salamanca, Yago Ascasibar, Carine Babusiaux, Marc Balcells, R. Barrena, Giuseppina Battaglia, Vasily Belokurov, Thomas Bensby, Piercarlo Bonifacio , et al. (190 additional authors not shown)

Abstract: WEAVE, the new wide-field, massively multiplexed spectroscopic survey facility for the William Herschel Telescope, will see first light in late 2022. WEAVE comprises a new 2-degree field-of-view prime-focus corrector system, a nearly 1000-multiplex fibre positioner, 20 individually deployable 'mini' integral field units (IFUs), and a single large IFU. These fibre systems feed a dual-beam spectrogr… ▽ More WEAVE, the new wide-field, massively multiplexed spectroscopic survey facility for the William Herschel Telescope, will see first light in late 2022. WEAVE comprises a new 2-degree field-of-view prime-focus corrector system, a nearly 1000-multiplex fibre positioner, 20 individually deployable 'mini' integral field units (IFUs), and a single large IFU. These fibre systems feed a dual-beam spectrograph covering the wavelength range 366$-$959\,nm at $R\sim5000$, or two shorter ranges at $R\sim20\,000$. After summarising the design and implementation of WEAVE and its data systems, we present the organisation, science drivers and design of a five- to seven-year programme of eight individual surveys to: (i) study our Galaxy's origins by completing Gaia's phase-space information, providing metallicities to its limiting magnitude for $\sim$3 million stars and detailed abundances for $\sim1.5$ million brighter field and open-cluster stars; (ii) survey $\sim0.4$ million Galactic-plane OBA stars, young stellar objects and nearby gas to understand the evolution of young stars and their environments; (iii) perform an extensive spectral survey of white dwarfs; (iv) survey $\sim400$ neutral-hydrogen-selected galaxies with the IFUs; (v) study properties and kinematics of stellar populations and ionised gas in $z<0.5$ cluster galaxies; (vi) survey stellar populations and kinematics in $\sim25\,000$ field galaxies at $0.3\lesssim z \lesssim 0.7$; (vii) study the cosmic evolution of accretion and star formation using $>1$ million spectra of LOFAR-selected radio sources; (viii) trace structures using intergalactic/circumgalactic gas at $z>2$. Finally, we describe the WEAVE Operational Rehearsals using the WEAVE Simulator. △ Less

Submitted 31 October, 2023; v1 submitted 7 December, 2022; originally announced December 2022.

Comments: 41 pages, 27 figures, accepted for publication by MNRAS; updated version including information on individual grants in a revised Acknowledgements section, corrections to the affiliation list, and an updated references list

Plasma composition measurements in an active region from Solar Orbiter/SPICE and Hinode/EIS

Authors: David H. Brooks, Miho Janvier, Deborah Baker, Harry P. Warren, Frédéric Auchère, Mats Carlsson, Andrzej Fludra, Don Hassler, Hardi Peter, Daniel Müller, David R. Williams, Regina Aznar Cuadrado, Krzysztof Barczynski, Eric Buchlin, Martin Caldwell, Terje Fredvik, Alessandra Giunta, Tim Grundy, Steve Guest, Margit Haberreiter, Louise Harra, Sarah Leeks, Susanna Parenti, Gabriel Pelouze, Joseph Plowman , et al. (6 additional authors not shown)

Abstract: A key goal of the Solar Orbiter mission is to connect elemental abundance measurements of the solar wind enveloping the spacecraft with EUV spectroscopic observations of their solar sources, but this is not an easy exercise. Observations from previous missions have revealed a highly complex picture of spatial and temporal variations of elemental abundances in the solar corona. We have used coordin… ▽ More A key goal of the Solar Orbiter mission is to connect elemental abundance measurements of the solar wind enveloping the spacecraft with EUV spectroscopic observations of their solar sources, but this is not an easy exercise. Observations from previous missions have revealed a highly complex picture of spatial and temporal variations of elemental abundances in the solar corona. We have used coordinated observations from Hinode and Solar Orbiter to attempt new abundance measurements with the SPICE (Spectral Imaging of the Coronal Environment) instrument, and benchmark them against standard analyses from EIS (EUV Imaging Spectrometer). We use observations of several solar features in AR 12781 taken from an Earth-facing view by EIS on 2020 November 10, and SPICE data obtained one week later on 2020 November 17; when the AR had rotated into the Solar Orbiter field-of-view. We identify a range of spectral lines that are useful for determining the transition region and low coronal temperature structure with SPICE, and demonstrate that SPICE measurements are able to differentiate between photospheric and coronal Mg/Ne abundances. The combination of SPICE and EIS is able to establish the atmospheric composition structure of a fan loop/outflow area at the active region edge. We also discuss the problem of resolving the degree of elemental fractionation with SPICE, which is more challenging without further constraints on the temperature structure, and comment on what that can tell us about the sources of the solar wind and solar energetic particles. △ Less

Submitted 17 October, 2022; originally announced October 2022.

Comments: To be published in The Astrophysical Journal

The Astropy Project: Sustaining and Growing a Community-oriented Open-source Project and the Latest Major Release (v5.0) of the Core Package

Authors: The Astropy Collaboration, Adrian M. Price-Whelan, Pey Lian Lim, Nicholas Earl, Nathaniel Starkman, Larry Bradley, David L. Shupe, Aarya A. Patil, Lia Corrales, C. E. Brasseur, Maximilian Nöthe, Axel Donath, Erik Tollerud, Brett M. Morris, Adam Ginsburg, Eero Vaher, Benjamin A. Weaver, James Tocknell, William Jamieson, Marten H. van Kerkwijk, Thomas P. Robitaille, Bruce Merry, Matteo Bachetti, H. Moritz Günther, Thomas L. Aldcroft , et al. (111 additional authors not shown)

Abstract: The Astropy Project supports and fosters the development of open-source and openly-developed Python packages that provide commonly needed functionality to the astronomical community. A key element of the Astropy Project is the core package $\texttt{astropy}$, which serves as the foundation for more specialized projects and packages. In this article, we summarize key features in the core package as… ▽ More The Astropy Project supports and fosters the development of open-source and openly-developed Python packages that provide commonly needed functionality to the astronomical community. A key element of the Astropy Project is the core package $\texttt{astropy}$, which serves as the foundation for more specialized projects and packages. In this article, we summarize key features in the core package as of the recent major release, version 5.0, and provide major updates for the Project. We then discuss supporting a broader ecosystem of interoperable packages, including connections with several astronomical observatories and missions. We also revisit the future outlook of the Astropy Project and the current status of Learn Astropy. We conclude by raising and discussing the current and future challenges facing the Project. △ Less

Submitted 28 June, 2022; originally announced June 2022.

Comments: 43 pages, 5 figures. To appear in ApJ. The author list has two parts: the authors that made significant contributions to the writing and/or coordination of the paper, followed by maintainers of and contributors to the Astropy Project. The position in the author list does not correspond to contributions to the Astropy Project as a whole

First observations from the SPICE EUV spectrometer on Solar Orbiter

Authors: A. Fludra, M. Caldwell, A. Giunta, T. Grundy, S. Guest, S. Leeks, S. Sidher, F. Auchère, M. Carlsson, D. Hassler, H. Peter, R. Aznar Cuadrado, É. Buchlin, S. Caminade, C. DeForest, T. Fredvik, M. Haberreiter, L. Harra, M. Janvier, T. Kucera, D. Müller, S. Parenti, W. Schmutz, U. Schühle, S. K. Solanki , et al. (6 additional authors not shown)

Abstract: We present first science observations taken during the commissioning activities of the Spectral Imaging of the Coronal Environment (SPICE) instrument on the ESA/NASA Solar Orbiter mission. SPICE is a high-resolution imaging spectrometer operating at extreme ultraviolet (EUV) wavelengths. In this paper we illustrate the possible types of observations to give prospective users a better understanding… ▽ More We present first science observations taken during the commissioning activities of the Spectral Imaging of the Coronal Environment (SPICE) instrument on the ESA/NASA Solar Orbiter mission. SPICE is a high-resolution imaging spectrometer operating at extreme ultraviolet (EUV) wavelengths. In this paper we illustrate the possible types of observations to give prospective users a better understanding of the science capabilities of SPICE. The paper discusses the first observations of the Sun on different targets and presents an example of the full spectra from the quiet Sun, identifying over 40 spectral lines from neutral hydrogen and ions of carbon, oxygen, nitrogen, neon, sulphur, magnesium, and iron. These lines cover the temperature range between 20,000 K and 1 million K (10MK in flares), providing slices of the Sun's atmosphere in narrow temperature intervals. We provide a list of count rates for the 23 brightest spectral lines. We show examples of raster images of the quiet Sun in several strong transition region lines, where we have found unusually bright, compact structures in the quiet Sun network, with extreme intensities up to 25 times greater than the average intensity across the image. The lifetimes of these structures can exceed 2.5 hours. We identify them as a transition region signature of coronal bright points and compare their areas and intensity enhancements. We also show the first above-limb measurements with SPICE above the polar limb in C III, O VI, and Ne VIII lines, and far off limb measurements in the equatorial plane in Mg IX, Ne VIII, and O VI lines. We discuss the potential to use abundance diagnostics methods to study the variability of the elemental composition that can be compared with in situ measurements to help confirm the magnetic connection between the spacecraft location and the Sun's surface, and locate the sources of the solar wind. △ Less

Submitted 21 October, 2021; originally announced October 2021.

Comments: 14 pages, 10 figures. Accepted for publication in A&A

Journal ref: A&A 656, A38 (2021)

The Solar Orbiter SPICE instrument -- An extreme UV imaging spectrometer

Authors: The SPICE Consortium, :, M. Anderson, T. Appourchaux, F. Auchère, R. Aznar Cuadrado, J. Barbay, F. Baudin, S. Beardsley, K. Bocchialini, B. Borgo, D. Bruzzi, E. Buchlin, G. Burton, V. Blüchel, M. Caldwell, S. Caminade, M. Carlsson, W. Curdt, J. Davenne, J. Davila, C. E. DeForest, G. Del Zanna, D. Drummond, J. Dubau , et al. (66 additional authors not shown)

Abstract: The Spectral Imaging of the Coronal Environment (SPICE) instrument is a high-resolution imaging spectrometer operating at extreme ultraviolet (EUV) wavelengths. In this paper, we present the concept, design, and pre-launch performance of this facility instrument on the ESA/NASA Solar Orbiter mission. The goal of this paper is to give prospective users a better understanding of the possible types o… ▽ More The Spectral Imaging of the Coronal Environment (SPICE) instrument is a high-resolution imaging spectrometer operating at extreme ultraviolet (EUV) wavelengths. In this paper, we present the concept, design, and pre-launch performance of this facility instrument on the ESA/NASA Solar Orbiter mission. The goal of this paper is to give prospective users a better understanding of the possible types of observations, the data acquisition, and the sources that contribute to the instrument's signal. The paper discusses the science objectives, with a focus on the SPICE-specific aspects, before presenting the instrument's design, including optical, mechanical, thermal, and electronics aspects. This is followed by a characterisation and calibration of the instrument's performance. The paper concludes with descriptions of the operations concept and data processing. The performance measurements of the various instrument parameters meet the requirements derived from the mission's science objectives. The SPICE instrument is ready to perform measurements that will provide vital contributions to the scientific success of the Solar Orbiter mission. △ Less

Submitted 3 September, 2019; originally announced September 2019.

Comments: A&A, accepted 19 August 2019; 26 pages, 25 figures

Journal ref: A&A 642, A14 (2020)

The data processing pipeline for the Herschel SPIRE Fourier Transform Spectrometer

Authors: T. Fulton, D. A. Naylor, E. T. Polehampton, I. Valtchanov, R. Hopwood, N. Lu, J. -P. Baluteau, G. Mainetti, C. Pearson, A. Papageorgiou, S. Guest, L. Zhang, P. Imhof, B. M. Swinyard, M. J. Griffin, T. L. Lim

Abstract: We present the data processing pipeline to generate calibrated data products from the Spectral and Photometric Imaging Receiver (SPIRE) imaging Fourier Transform Spectrometer on the Herschel Space Observatory. The pipeline processes telemetry from SPIRE observations and produces calibrated spectra for all resolution modes. The spectrometer pipeline shares some elements with the SPIRE photometer pi… ▽ More We present the data processing pipeline to generate calibrated data products from the Spectral and Photometric Imaging Receiver (SPIRE) imaging Fourier Transform Spectrometer on the Herschel Space Observatory. The pipeline processes telemetry from SPIRE observations and produces calibrated spectra for all resolution modes. The spectrometer pipeline shares some elements with the SPIRE photometer pipeline, including the conversion of telemetry packets into data timelines and calculation of bolometer voltages. We present the following fundamental processing steps unique to the spectrometer: temporal and spatial interpolation of the scan mechanism and detector data to create interferograms; Fourier transformation; apodization; and creation of a data cube. We also describe the corrections for various instrumental effects including first- and second-level glitch identification and removal, correction of the effects due to emission from the Herschel telescope and from within the spectrometer instrument, interferogram baseline correction, temporal and spatial phase correction, non-linear response of the bolometers, and variation of instrument performance across the focal plane arrays. Astronomical calibration is based on combinations of observations of standard astronomical sources and regions of space known to contain minimal emission. △ Less

Submitted 1 March, 2016; originally announced March 2016.

Comments: 14 pages, 13 figures, MNRAS in press

The Herschel-SPIRE instrument and its in-flight performance

Authors: M. J. Griffin, A. Abergel, A. Abreu, P. A. R. Ade, P. André, J. -L. Augueres, T. Babbedge, Y. Bae, T. Baillie, J. -P. Baluteau, M. J. Barlow, G. Bendo, D. Benielli, J. J. Bock, P. Bonhomme, D. Brisbin, C. Brockley-Blatt, M. Caldwell, C. Cara, N. Castro-Rodriguez, R. Cerulli, P. Chanial, S. Chen, E. Clark, D. L. Clements , et al. (154 additional authors not shown)

Abstract: The Spectral and Photometric Imaging Receiver (SPIRE), is the Herschel Space Observatory`s submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 microns, and an imaging Fourier Transform Spectrometer (FTS) which covers simultaneously its whole operating range of 194-671 microns (447-1550 GHz). The SPIRE detectors are arrays of feedhorn-c… ▽ More The Spectral and Photometric Imaging Receiver (SPIRE), is the Herschel Space Observatory`s submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 microns, and an imaging Fourier Transform Spectrometer (FTS) which covers simultaneously its whole operating range of 194-671 microns (447-1550 GHz). The SPIRE detectors are arrays of feedhorn-coupled bolometers cooled to 0.3 K. The photometer has a field of view of 4' x 8', observed simultaneously in the three spectral bands. Its main operating mode is scan-mapping, whereby the field of view is scanned across the sky to achieve full spatial sampling and to cover large areas if desired. The spectrometer has an approximately circular field of view with a diameter of 2.6'. The spectral resolution can be adjusted between 1.2 and 25 GHz by changing the stroke length of the FTS scan mirror. Its main operating mode involves a fixed telescope pointing with multiple scans of the FTS mirror to acquire spectral data. For extended source measurements, multiple position offsets are implemented by means of an internal beam steering mirror to achieve the desired spatial sampling and by rastering of the telescope pointing to map areas larger than the field of view. The SPIRE instrument consists of a cold focal plane unit located inside the Herschel cryostat and warm electronics units, located on the spacecraft Service Module, for instrument control and data handling. Science data are transmitted to Earth with no on-board data compression, and processed by automatic pipelines to produce calibrated science products. The in-flight performance of the instrument matches or exceeds predictions based on pre-launch testing and modelling: the photometer sensitivity is comparable to or slightly better than estimated pre-launch, and the spectrometer sensitivity is also better by a factor of 1.5-2. △ Less

Submitted 27 May, 2010; originally announced May 2010.

Comments: Accepted for publication in Astronomy & Astrophyics (Herschel first results special issue)

In-flight calibration of the Herschel-SPIRE instrument

Authors: B. M. Swinyard, P. Ade, J-P. Baluteau, H. Aussel, M. J. Barlow, G. J. Bendo, D. Benielli, J. Bock, D. Brisbin, A. Conley, L. Conversi, A. Dowell, D. Dowell, M. Ferlet, T. Fulton, J. Glenn, A. Glauser, D. Griffin, M. Griffin, S. Guest, P. Imhof, K. Isaak, S. Jones, K. King, S. Leeks , et al. (33 additional authors not shown)

Abstract: SPIRE, the Spectral and Photometric Imaging Receiver, is the Herschel Space Observatory's submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 μm, and an imaging Fourier transform spectrometer (FTS) covering 194-671 μm (447-1550 GHz). In this paper we describe the initial approach taken to the absolute calibration of the SPIRE instrument… ▽ More SPIRE, the Spectral and Photometric Imaging Receiver, is the Herschel Space Observatory's submillimetre camera and spectrometer. It contains a three-band imaging photometer operating at 250, 350 and 500 μm, and an imaging Fourier transform spectrometer (FTS) covering 194-671 μm (447-1550 GHz). In this paper we describe the initial approach taken to the absolute calibration of the SPIRE instrument using a combination of the emission from the Herschel telescope itself and the modelled continuum emission from solar system objects and other astronomical targets. We present the photometric, spectroscopic and spatial accuracy that is obtainable in data processed through the "standard" pipelines. The overall photometric accuracy at this stage of the mission is estimated as 15% for the photometer and between 15 and 50% for the spectrometer. However, there remain issues with the photometric accuracy of the spectra of low flux sources in the longest wavelength part of the SPIRE spectrometer band. The spectrometer wavelength accuracy is determined to be better than 1/10th of the line FWHM. The astrometric accuracy in SPIRE maps is found to be 2 arcsec when the latest calibration data are used. The photometric calibration of the SPIRE instrument is currently determined by a combination of uncertainties in the model spectra of the astronomical standards and the data processing methods employed for map and spectrum calibration. Improvements in processing techniques and a better understanding of the instrument performance will lead to the final calibration accuracy of SPIRE being determined only by uncertainties in the models of astronomical standards. △ Less

Submitted 27 May, 2010; originally announced May 2010.

Comments: Accepted for publication in Astronomy&Astrophysics, Herschel First Results special issue

The ISOCAM/LW Detector Dark Current Behaviour

Authors: A. Biviano, M. Sauvage, P. Gallais, O. Boulade, P. Roman, S. Guest, K. Okumura, S. Ott

Abstract: We describe the calibration, measurements and data reduction, of the dark current of the ISOCAM/LW detector. We point-out the existence of two significant drifts of the LW dark-current, one throughout the ISO mission, on a timescale of days, another within each single revolution, on a timescale of hours. We also show the existence of a dependence of the dark current on the temperature of the ISO… ▽ More We describe the calibration, measurements and data reduction, of the dark current of the ISOCAM/LW detector. We point-out the existence of two significant drifts of the LW dark-current, one throughout the ISO mission, on a timescale of days, another within each single revolution, on a timescale of hours. We also show the existence of a dependence of the dark current on the temperature of the ISOCAM detector. By characterizing all these effects through polynomial fittings, we build a model for the LW calibration dark, that depends on the epoch of observation (parametrized with the revolution number and the time elapsed in that given revolution since the activation) and on the temperature of the ISOCAM detector. The model parameters are tuned for each of ISOCAM/LW pixel. We show that the modelling is very effective in taking into account the dark-current variations and allows a much cleaner dark subtraction than using a brute average of several calibration dark images. The residuals of the LW model-dark subtraction are, on average, similar to the pre-launch expectation. △ Less

Submitted 15 October, 1999; originally announced October 1999.

Comments: 24 pages, accepted for publication in Experimental Astronomy

Journal ref: Exper.Astron. 10 (2000) 255-277