-
CH$_3$OH as a User-Friendly Density Probe: Calibration and Beyond
Authors:
A. Giannetti,
S. Leurini,
E. Schisano,
V. Casasola,
T. G. S. Pillai,
C. Sanna,
S. Ferrada-Chamorro
Abstract:
Almost all the physics of star formation critically depends on the number density of the molecular gas. However, the methods to estimate this key property often rely on uncertain assumptions about geometry, depend on overly simplistic uniform models, or require time-expensive observations to constrain the gas temperature as well. An easy-to-use method to derive n(H2) that is valid under realistic…
▽ More
Almost all the physics of star formation critically depends on the number density of the molecular gas. However, the methods to estimate this key property often rely on uncertain assumptions about geometry, depend on overly simplistic uniform models, or require time-expensive observations to constrain the gas temperature as well. An easy-to-use method to derive n(H2) that is valid under realistic conditions is absent, causing an asymmetry in how accurately this parameter is estimated, and how often dedicated tracers are used, compared to the gas temperature. We propose and calibrate a versatile tool based on CH3OH lines that greatly simplifies the inference of the number density. CH3OH is abundant in both cold and hot gas, and thus it can be applied to a wide variety of scales. Moreover, this tool does not need to be tailored to the specific source properties (e.g. distance, temperature, and mass). We perform RT calculations to investigate the robustness of the line ratios as density probes, also in the presence of density and temperature gradients. We find that the ratios of the (2_K-1_K) band transitions constrain the average n(H2) along the LOS within a factor of 2-3 in the range 5 x 10^4 - 3 x 10^7 cm^-3. The range can be extended down to a few times 10^3 cm^-3, when also using line ratios from the (5_K-4_K) and/or (7_K-6_K) bands. We provide practical analytic formulas and a numerical method for deriving n(H2) and its uncertainty from the line ratios. Thanks to our calibration and analytical recipes, we make the estimate of n(H2) much simpler, with an effort comparable or inferior to deriving Tex, contributing to offsetting the disparity between these two fundamental parameters of the molecular gas. Applying our method to a sub-sample of sources from the ATLASGAL TOP100 we show that the material in the clumps is being compressed, accelerating in the latest stages.
△ Less
Submitted 26 March, 2025;
originally announced March 2025.
-
The GRETOBAPE gas-phase reaction network: the importance of being exothermic
Authors:
Lorenzo Tinacci,
Simón Ferrada-Chamorro,
Cecilia Ceccarelli,
Stefano Pantaleone,
Daniela Ascenzi,
Andrea Maranzana,
Nadia Balucani,
Piero Ugliengo
Abstract:
The gas-phase reaction networks are the backbone of astrochemical models. However, due to their complexity and non-linear impact on the astrochemical modeling, they can be the first source of error in the simulations if incorrect reactions are present. Over time, following the increasing number of species detected, astrochemists have added new reactions, based on laboratory experiments and quantum…
▽ More
The gas-phase reaction networks are the backbone of astrochemical models. However, due to their complexity and non-linear impact on the astrochemical modeling, they can be the first source of error in the simulations if incorrect reactions are present. Over time, following the increasing number of species detected, astrochemists have added new reactions, based on laboratory experiments and quantum mechanics (QM) computations as well as reactions inferred by chemical intuition and similarity principle. However, sometimes no verification of their feasibility in the interstellar conditions, namely their exothermicity, was performed. In this work, we present a new gas-phase reaction network, GRETOBAPE, based on the KIDA2014 network and updated with several reactions, cleaned from endothermic reactions not explicitly recognized as such. To this end, we characterized all the species in the GRETOBAPE network with accurate QM calculations. We found that 5% of the reactions in the original network are endothermic although most of them are reported as barrierless. The reaction network of Si-bearing species is the most impacted by the endothermicity cleaning process. We also produced a cleaned reduced network, GRETOBAPE-red, to be used to simulate astrochemical situations where only C-, O-, N- and S- bearing species with less than 6 atoms are needed. Finally, the new GRETOBAPE network, its reduced version, as well as the database with all the molecular properties are made publicly available. The species properties database can be used in the future to test the feasibility of possibly new reactions.
△ Less
Submitted 28 February, 2023;
originally announced February 2023.
-
Chemical post-processing of magneto-hydrodynamical simulations of star-forming regions: robustness and pitfalls
Authors:
Simón Ferrada-Chamorro,
Alessandro Lupi,
Stefano Bovino
Abstract:
A common approach to model complex chemistry in numerical simulations is via post-processing of existing magneto-hydrodynamic simulations, relying on computing the evolution of chemistry over the dynamic history of a subset of particles from within the raw simulation. Here, we validate such a technique, assessing its ability to recover the abundances of chemical species, using the chemistry packag…
▽ More
A common approach to model complex chemistry in numerical simulations is via post-processing of existing magneto-hydrodynamic simulations, relying on computing the evolution of chemistry over the dynamic history of a subset of particles from within the raw simulation. Here, we validate such a technique, assessing its ability to recover the abundances of chemical species, using the chemistry package KROME. We also assess, for the first time, the importance of the main free input parameters, by means of a direct comparison with a self-consistent state-of-the-art simulation in which chemistry was directly coupled to hydrodynamics. We have found that the post-processing is highly reliable, with an accuracy at the percent level, even when the most relaxed input parameters are employed. In particular, our results show that the number of particles used does not affect significantly the average properties, although it suppresses the appearance of possibly important spatial features. On the other hand, the choice of the integration time-step plays a crucial role. Longer integration time-steps can produce large errors, as the post-processing solution will be forced towards chemical equilibrium, a condition that does not always necessarily apply. When the interpolation-based reconstruction of chemical properties is performed, the errors further increase up to a factor of $\sim2$. Concluding, our results suggest that this technique is extremely useful when exploring the relative quantitative effect of different chemical parameters and/or networks, without the need of re-running simulations multiple times, but some care should be taken in the choice of particles sub-sample and integration time-step.
△ Less
Submitted 4 May, 2021;
originally announced May 2021.
-
A new proxy to estimate the cosmic-ray ionisation rate in dense cores
Authors:
Stefano Bovino,
Simon Ferrada-Chamorro,
Alessandro Lupi,
Dominik R. G. Schleicher,
Paola Caselli
Abstract:
Cosmic rays are a global source of ionisation, and the ionisation fraction represents a fundamental parameter in the interstellar medium. Ions couple to magnetic fields, affect the chemistry, and the dynamics of star-forming regions as well as planetary atmospheres. However, the cosmic-ray ionisation rate represents one of the bottlenecks for astrochemical models, and its determination is one of t…
▽ More
Cosmic rays are a global source of ionisation, and the ionisation fraction represents a fundamental parameter in the interstellar medium. Ions couple to magnetic fields, affect the chemistry, and the dynamics of star-forming regions as well as planetary atmospheres. However, the cosmic-ray ionisation rate represents one of the bottlenecks for astrochemical models, and its determination is one of the most puzzling problems in astrophysics. While for diffuse clouds reasonable values have been provided from H$_3^+$ observations, for dense clouds, due to the lack of rotational transitions, this is not possible, and estimates are strongly biased by the employed model. We present here an analytical expression, obtained from first principles, to estimate the cosmic-ray ionisation rate from observational quantities. The theoretical predictions are validated with high-resolution three-dimensional numerical simulations and applied to the well known core L1544; we obtained an estimate of $ζ_2 \sim 2-3 \times 10^{-17}$ s$^{-1}$. Our results and the analytical formulae provided represent the first model-independent, robust tool to probe the cosmic-ray ionisation rate in the densest part of star-forming regions (on spatial scales of $R \leq 0.05$ pc). An error analysis is presented to give statistical relevance to our study.
△ Less
Submitted 11 March, 2020;
originally announced March 2020.
-
The 3D structure of CO depletion in high-mass prestellar regions
Authors:
S. Bovino,
S. Ferrada-Chamorro,
A. Lupi,
G. Sabatini,
A. Giannetti,
D. R. G. Schleicher
Abstract:
Disentangling the different stages of the star-formation process, in particular in the high-mass regime, is a challenge in astrophysics. Chemical clocks could help alleviating this problem, but their evolution strongly depends on many parameters, leading to degeneracy in the interpretation of the observational data. One of these uncertainties is the degree of CO depletion. We present here the firs…
▽ More
Disentangling the different stages of the star-formation process, in particular in the high-mass regime, is a challenge in astrophysics. Chemical clocks could help alleviating this problem, but their evolution strongly depends on many parameters, leading to degeneracy in the interpretation of the observational data. One of these uncertainties is the degree of CO depletion. We present here the first self-consistent magneto-hydrodynamic simulations of high-mass star-forming regions at different scales, fully coupled with a non-equilibrium chemical network, which includes C-N-O bearing molecules. Depletion and desorption processes are treated time-dependently. The results show that full CO-depletion (i.e. all gas-phase CO frozen-out on the surface of dust grains), can be reached very quickly, in one third or even smaller fractions of the free-fall time, whether the collapse proceeds on slow or fast timescales. This leads to a high level of deuteration in a short time both for typical tracers like N$_2$H$^+$, as well as for the main ion H$_3^+$, the latter being in general larger and more extended. N$_2$ depletion is slightly less efficient, and no direct effects on N-bearing molecules and deuterium fractionation are observed. We show that CO depletion is not the only driver of deuteration, and that there is a strong impact on $D_{frac}$ when changing the grain-size. We finally apply a two-dimensional gaussian Point Spread Function to our results to mimic observations with single-dish and interferometers. Our findings suggest that the low-values observed in high-mass star-forming clumps are in reality masking a full-depletion stage in the inner 0.1 pc region.
△ Less
Submitted 30 October, 2019;
originally announced October 2019.
-
Synthetic observations of H$_2$D$^+$ towards high-mass starless cores
Authors:
Joaquin. Zamponi F.,
Dominik R. G. Schleicher,
Stefano Bovino,
Andrea Giannetti,
Giovanni Sabatini,
Simon Ferrada-Chamorro
Abstract:
Young massive stars are usually found embedded in dense and massive molecular clumps and are known for being highly obscured and distant. During their formation process, deuteration is regarded as a potentially good indicator of the formation stage. Therefore, proper observations of such deuterated molecules are crucial, but still, hard to perform. In this work, we test the observability of the tr…
▽ More
Young massive stars are usually found embedded in dense and massive molecular clumps and are known for being highly obscured and distant. During their formation process, deuteration is regarded as a potentially good indicator of the formation stage. Therefore, proper observations of such deuterated molecules are crucial, but still, hard to perform. In this work, we test the observability of the transition o-H$_2$D$^+(1_{10}$-$1_{11})$, using a synthetic source, to understand how the physical characteristics are reflected in observations through interferometers and single-dish telescopes. In order to perform such tests, we post-processed a magneto-hydrodynamic simulation of a collapsing magnetized core using the radiative transfer code POLARIS.
Using the resulting intensity distributions as input, we performed single-dish (APEX) and interferometric (ALMA) synthetic observations at different evolutionary times, always mimicking realistic configurations. Finally, column densities were derived to compare our simulations with real observations previously performed. Our derivations for o-H$_2$D$^+$ are in agreement with values reported in the literature, in the range of 10$^{\!10-11}$cm$^{\!-2}$ and 10$^{\!12-13}$cm$^{\!-2}$ for single-dish and interferometric measurements, respectively.
△ Less
Submitted 27 April, 2019; v1 submitted 3 December, 2018;
originally announced December 2018.
