-
BEaTriX, expanded X-ray beam facility for testing modular elements of telescope optics: an update
Authors:
Carlo Pelliciari,
Daniele Spiga,
Elisa Bonnini,
Elisa Buffagni,
Claudio Ferrari,
Giovanni Pareschi,
Gianpiero Tagliaferri
Abstract:
We present in this paper an update on the design of BEaTriX (Beam Expander Testing X-ray facility), an X-ray apparatus to be realized at INAF/OAB and that will generate an expanded, uniform and parallel beam of soft X-rays. BEaTriX will be used to perform the functional tests of X-ray focusing modules of large X-ray optics such as those for the ATHENA X-ray observatory, using the Silicon Pore Opti…
▽ More
We present in this paper an update on the design of BEaTriX (Beam Expander Testing X-ray facility), an X-ray apparatus to be realized at INAF/OAB and that will generate an expanded, uniform and parallel beam of soft X-rays. BEaTriX will be used to perform the functional tests of X-ray focusing modules of large X-ray optics such as those for the ATHENA X-ray observatory, using the Silicon Pore Optics (SPO) as a baseline technology, and Slumped Glass Optics (SGO) as a possible alternative. Performing the tests in X-rays provides the advantage of an in-situ, at-wavelength quality control of the optical modules produced in series by the industry, performing a selection of the modules with the best angular resolution, and, in the case of SPOs, there is also the interesting possibility to align the parabolic and the hyperbolic stacks directly under X-rays, to minimize the aberrations. However, a parallel beam with divergence below 2 arcsec is necessary in order to measure mirror elements that are expected to reach an angular resolution of about 4 arcsec, since the ATHENA requirement for the entire telescope is 5 arcsec. Such a low divergence over the typical aperture of modular optics would require an X-ray source to be located in a several kilometers long vacuum tube. In contrast, BEaTriX will be compact enough (5 m x 14 m) to be housed in a small laboratory, will produce an expanded X-ray beam 60 mm x 200 mm broad, characterized by a very low divergence (1.5 arcsec HEW), strong polarization, high uniformity, and X-ray energy selectable between 1.5 keV and 4.5 keV. In this work we describe the BEaTriX layout and show a performance simulation for the X-ray energy of 4.5 keV.
△ Less
Submitted 30 September, 2016;
originally announced September 2016.
-
Focusing effect of bent GaAs crystals for gamma-ray Laue lenses: Monte Carlo and experimental results
Authors:
E. Virgilli,
F. Frontera,
P. Rosati,
E. Bonnini,
E. Buffagni,
C. Ferrari,
J. B. Stephen,
E. Caroli,
N. Auricchio,
A. Basili,
S. Silvestri
Abstract:
We report on results of observation of the focusing effect from the planes (220) of Gallium Arsenide (GaAs) crystals. We have compared the experimental results with the simulations of the focusing capability of GaAs tiles through a developed Monte Carlo. The GaAs tiles were bent using a lapping process developed at the cnr/imem - Parma (Italy) in the framework of the laue project, funded by ASI, d…
▽ More
We report on results of observation of the focusing effect from the planes (220) of Gallium Arsenide (GaAs) crystals. We have compared the experimental results with the simulations of the focusing capability of GaAs tiles through a developed Monte Carlo. The GaAs tiles were bent using a lapping process developed at the cnr/imem - Parma (Italy) in the framework of the laue project, funded by ASI, dedicated to build a broad band Laue lens prototype for astrophysical applications in the hard X-/soft gamma-ray energy range (80-600 keV). We present and discuss the results obtained from their characterization, mainly in terms of focusing capability. Bent crystals will significantly increase the signal to noise ratio of a telescope based on a Laue lens, consequently leading to an unprecedented enhancement of sensitivity with respect to the present non focusing instrumentation.
△ Less
Submitted 2 December, 2015;
originally announced December 2015.
-
An expanded X-ray beam facility (BEaTriX) to test the modular elements of the ATHENA optics
Authors:
D. Spiga,
C. Pelliciari,
E. Bonnini,
E. Buffagni,
C. Ferrari,
G. Pareschi,
G. Tagliaferri
Abstract:
Future large X-ray observatories like ATHENA will be equipped with very large optics, obtained by assembling modular optical elements, named X-ray Optical Units (XOU) based on the technology of either Silicon Pore Optics or Slumped Glass Optics. In both cases, the final quality of the modular optic (a 5 arcsec HEW requirement for ATHENA) is determined by the accuracy alignment of the XOUs within t…
▽ More
Future large X-ray observatories like ATHENA will be equipped with very large optics, obtained by assembling modular optical elements, named X-ray Optical Units (XOU) based on the technology of either Silicon Pore Optics or Slumped Glass Optics. In both cases, the final quality of the modular optic (a 5 arcsec HEW requirement for ATHENA) is determined by the accuracy alignment of the XOUs within the assembly, but also by the angular resolution of the individual XOU. This is affected by the mirror shape accuracy, its surface roughness, and the mutual alignment of the mirrors within the XOU itself. Because of the large number of XOUs to be produced, quality tests need to be routinely done to select the most performing stacked blocks, to be integrated into the final optic. In addition to the usual metrology based on profile and roughness measurements, a direct measurement with a broad, parallel, collimated and uniform X- ray beam would be the most reliable test, without the need of a focal spot reconstruction as usually done in synchrotron light. To this end, we designed the BEaTriX (Beam Expander Testing X-ray facility) to be realized at INAF-OAB, devoted to the functional tests of the XOUs. A grazing incidence parabolic mirror and an asymmetrically cut crystal will produce a parallel X-ray beam broad enough to illuminate the entire aperture of the focusing elements. An X-ray camera at the focal distance from the mirrors will directly record the image. The selection of different crystals will enable to test the XOUs in the 1 - 5 keV range, included in the X-ray energy band of ATHENA (0.2-12 keV). In this paper we discuss a possible BEaTriX facility implementation. We also show a preliminary performance simulation of the optical system.
△ Less
Submitted 15 September, 2015;
originally announced September 2015.
-
The LAUE project and its main results
Authors:
E. Virgilli,
F. Frontera,
V. Valsan,
V. Liccardo,
V. Carassiti,
S. Squerzanti,
M. Statera,
M. Parise,
S. Chiozzi,
F. Evangelisti,
E. Caroli,
J. Stephen,
N. Auricchio,
S. Silvestri,
A. Basili,
F. Cassese,
L. Recanatesi,
V. Guidi,
V. Bellucci,
R. Camattari,
C. Ferrari,
A. Zappettini,
E. Buffagni,
E. Bonnini,
M. Pecora
, et al. (2 additional authors not shown)
Abstract:
We will describe the LAUE project, supported by the Italian Space Agency, whose aim is to demonstrate the capability to build a focusing optics in the hard X-/soft gamma-ray domain (80--600 keV). To show the lens feasibility, the assembling of a Laue lens petal prototype with 20 m focal length is ongoing. Indeed, a feasibility study, within the LAUE project, has demonstrated that a Laue lens made…
▽ More
We will describe the LAUE project, supported by the Italian Space Agency, whose aim is to demonstrate the capability to build a focusing optics in the hard X-/soft gamma-ray domain (80--600 keV). To show the lens feasibility, the assembling of a Laue lens petal prototype with 20 m focal length is ongoing. Indeed, a feasibility study, within the LAUE project, has demonstrated that a Laue lens made of petals is feasible. Our goal is a lens in the 80-600 keV energy band. In addition to a detailed description of the new LARIX facility, in which the lens is being assembled, we will report the results of the project obtained so far.
△ Less
Submitted 20 January, 2014;
originally announced January 2014.
-
Bent crystal selection and assembling for the LAUE project
Authors:
Vincenzo Liccardo,
Enrico Virgilli,
Filippo Frontera,
Vineeth Valsan,
Vincenzo Guidi,
Elisa Buffagni
Abstract:
For the first time, with the Laue project, bent crystals are being used for focusing photons in the 80-300 keV energy range. The advantage is their high reflectivity and better Point Spread Function with respect to the mosaic flat crystals. Simulations have already shown their excellent focusing capability which makes them the best candidates for a Laue lens whose sensitivity is also driven by the…
▽ More
For the first time, with the Laue project, bent crystals are being used for focusing photons in the 80-300 keV energy range. The advantage is their high reflectivity and better Point Spread Function with respect to the mosaic flat crystals. Simulations have already shown their excellent focusing capability which makes them the best candidates for a Laue lens whose sensitivity is also driven by the size of the focused spot. Selected crystals are Germanium (perfect, (111)) and Gallium Arsenide (mosaic, (220)) with 40 m curvature radius to get a spherical lens with 20 m long focal length. A lens petal is being built. We report the measurement technique by which we are able to estimate the exact curvature of each tile within a few percent of uncertainty and their diffraction efficiency. We also discuss some results.
△ Less
Submitted 1 October, 2013;
originally announced October 2013.
