-
The CCD Controller and Detector
Authors:
G. Bonano,
C. Bonoli,
F. Bortoletto,
P. Bruno,
M. Comari,
R. Cosentino,
M. D'Alessandro,
D. Fantinel,
E. Giro,
S. Scuderi
Abstract:
All the scientific instruments of the Italian National Telescope "Galileo" (TNG). as well as the tracking systems and the Shack-Hartmann wavefront systems use CCDs as detectors. The CCD procurement is crucial to optimize the instruments performance, and, of course, equal importance assumes the design and realization of controllers able to drive various kinds of CCDs with a very low readout noise.…
▽ More
All the scientific instruments of the Italian National Telescope "Galileo" (TNG). as well as the tracking systems and the Shack-Hartmann wavefront systems use CCDs as detectors. The CCD procurement is crucial to optimize the instruments performance, and, of course, equal importance assumes the design and realization of controllers able to drive various kinds of CCDs with a very low readout noise. Detectors characterization is of fundamental importance when they have to be used in scientific instrumentation. Various CCDs have been assembled in cryostats and tested at our laboratory in order to select the suitable detector for the optical instruments of the TNG. The relevant phases of the group activity are here described, as well as the commissioning at the telescope and the work that is in progress.
△ Less
Submitted 22 February, 2023;
originally announced February 2023.
-
The commissioning phase
Authors:
F. Bortoletto,
S. Benetti,
G. Bonanno,
C. Bonoli,
P. Bruno,
C. Carmona,
P. Conconi,
L. Corcione,
R. Cosentino,
M. D'Alessandro,
R. Dominguez,
D. Fantinel,
A. Galli,
D. Gardiol,
A. Ghedina,
F. Ghinassi,
E. Giro,
C. Gonzales,
NI. Gonzalez,
J. Guerra,
A. Magazzù,
D. Mancini,
E. Marchetti,
J. Medina,
F. Pasian
, et al. (12 additional authors not shown)
Abstract:
In May 1997 a consistent part of the services and structures committed to the industry had already been released to the commissioning group. The telescope itself was, with the exception of the Nasmyth derotators, motors and all the optics groups, basically ready in its mechanical parts to accept the integration of all services and control equipment. Also the verification of the cabling (interlocks…
▽ More
In May 1997 a consistent part of the services and structures committed to the industry had already been released to the commissioning group. The telescope itself was, with the exception of the Nasmyth derotators, motors and all the optics groups, basically ready in its mechanical parts to accept the integration of all services and control equipment. Also the verification of the cabling (interlocks, data-nets, power and controls) already mounted was started in the same period. Starting from June 1998 (telescope first-light date) the telescope went gradually in use, several nights per week, in order to test and tune the tracking and pointing system, the optics and the first derotator system (Nasmyth A station). At the end of the commissioning period and with the first scientific instruments mounted (April 1999) also the first routinely observations started. In this moment the telescope is doing astronomy 80% of time and the complete first-light instrumentation is mounted.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
CCDs for the instrumentation of the Telescopio Nazionale Galileo
Authors:
R. Cosentino,
G. Bonanno,
P. Bruno,
S. Scuderi,
C. Bonoli,
F. Bortoletto,
M. D'Alessandro,
D. Fantinel
Abstract:
Most of the scientific instrumentation as well as the tracking systems and the Shack- Hartmann wavefront analysers at the Italian National Telescope Galileo use CCDs as detectors. The characterization of detectors is of fundamental importance for their correct utilization in scientific instrumentation. We report on the measurement of the electro-optical characteristics of CCDs that will be used in…
▽ More
Most of the scientific instrumentation as well as the tracking systems and the Shack- Hartmann wavefront analysers at the Italian National Telescope Galileo use CCDs as detectors. The characterization of detectors is of fundamental importance for their correct utilization in scientific instrumentation. We report on the measurement of the electro-optical characteristics of CCDs that will be used in the scientific instrumentation at the Italian National Telescope. In particular we will show and compare the quantum eÆciency, the charge transfer eÆciency, the dark current, the read out noise the uniformity and the linearity of two sets of CCDs manufactured by EEV and LORAL. Finally, we will show the preliminary tests done at the telescope with the optical imager that has a mosaic of two EEV chips.
△ Less
Submitted 17 February, 2023;
originally announced February 2023.
-
Euclid Near Infrared Spectrometer and Photometer instrument flight model presentation, performance and ground calibration results summary
Authors:
T. Maciaszek,
A. Ealet,
W. Gillard,
K. Jahnke,
R. Barbier,
E. Prieto,
W. Bon,
A. Bonnefoi,
A. Caillat,
M. Carle,
A. Costille,
F. Ducret,
C. Fabron,
B. Foulon,
J. L. Gimenez,
E. Grassi,
M. Jaquet,
D. Le Mignant,
L. Martin,
T. Pamplona,
P. Sanchez,
J. C. Clémens,
L. Caillat,
M. Niclas,
A. Secroun
, et al. (73 additional authors not shown)
Abstract:
The NISP (Near Infrared Spectrometer and Photometer) is one of the two Euclid instruments. It operates in the near-IR spectral region (950-2020nm) as a photometer and spectrometer. The instrument is composed of: a cold (135 K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly, a filter wheel mechanism, a grism wheel mechanism, a calibration unit, and a thermal…
▽ More
The NISP (Near Infrared Spectrometer and Photometer) is one of the two Euclid instruments. It operates in the near-IR spectral region (950-2020nm) as a photometer and spectrometer. The instrument is composed of: a cold (135 K) optomechanical subsystem consisting of a Silicon carbide structure, an optical assembly, a filter wheel mechanism, a grism wheel mechanism, a calibration unit, and a thermal control system, a detection system based on a mosaic of 16 H2RG with their front-end readout electronic, and a warm electronic system (290 K) composed of a data processing / detector control unit and of an instrument control unit that interfaces with the spacecraft via a 1553 bus for command and control and via Spacewire links for science data.
This paper presents: the final architecture of the flight model instrument and subsystems, and the performance and the ground calibration measurement done at NISP level and at Euclid Payload Module level at operational cold temperature.
△ Less
Submitted 18 October, 2022;
originally announced October 2022.
-
Euclid Definition Study Report
Authors:
R. Laureijs,
J. Amiaux,
S. Arduini,
J. -L. Auguères,
J. Brinchmann,
R. Cole,
M. Cropper,
C. Dabin,
L. Duvet,
A. Ealet,
B. Garilli,
P. Gondoin,
L. Guzzo,
J. Hoar,
H. Hoekstra,
R. Holmes,
T. Kitching,
T. Maciaszek,
Y. Mellier,
F. Pasian,
W. Percival,
J. Rhodes,
G. Saavedra Criado,
M. Sauvage,
R. Scaramella
, et al. (194 additional authors not shown)
Abstract:
Euclid is a space-based survey mission from the European Space Agency designed to understand the origin of the Universe's accelerating expansion. It will use cosmological probes to investigate the nature of dark energy, dark matter and gravity by tracking their observational signatures on the geometry of the universe and on the cosmic history of structure formation. The mission is optimised for tw…
▽ More
Euclid is a space-based survey mission from the European Space Agency designed to understand the origin of the Universe's accelerating expansion. It will use cosmological probes to investigate the nature of dark energy, dark matter and gravity by tracking their observational signatures on the geometry of the universe and on the cosmic history of structure formation. The mission is optimised for two independent primary cosmological probes: Weak gravitational Lensing (WL) and Baryonic Acoustic Oscillations (BAO). The Euclid payload consists of a 1.2 m Korsch telescope designed to provide a large field of view. It carries two instruments with a common field-of-view of ~0.54 deg2: the visual imager (VIS) and the near infrared instrument (NISP) which contains a slitless spectrometer and a three bands photometer. The Euclid wide survey will cover 15,000 deg2 of the extragalactic sky and is complemented by two 20 deg2 deep fields. For WL, Euclid measures the shapes of 30-40 resolved galaxies per arcmin2 in one broad visible R+I+Z band (550-920 nm). The photometric redshifts for these galaxies reach a precision of dz/(1+z) < 0.05. They are derived from three additional Euclid NIR bands (Y, J, H in the range 0.92-2.0 micron), complemented by ground based photometry in visible bands derived from public data or through engaged collaborations. The BAO are determined from a spectroscopic survey with a redshift accuracy dz/(1+z) =0.001. The slitless spectrometer, with spectral resolution ~250, predominantly detects Ha emission line galaxies. Euclid is a Medium Class mission of the ESA Cosmic Vision 2015-2025 programme, with a foreseen launch date in 2019. This report (also known as the Euclid Red Book) describes the outcome of the Phase A study.
△ Less
Submitted 14 October, 2011;
originally announced October 2011.
-
The Sooner: a Large Robotic Telescope
Authors:
G. Chincarini,
M. Zannoni,
S. Covino,
E. Molinari,
S. Benetti,
F. Vitali,
C. Bonoli,
F. Bortoletto,
E. Cascone,
R. Cosentino,
F. D'Alessio,
P. D'Avanzo,
V. De Caprio,
M. Della Valle,
A. Fernandez-Soto,
D. Fugazza,
E. Giro,
A. Gomboc,
C. Guidorzi,
D. Magrin,
G. Malaspina,
L. Mankiewicz,
R. Margutti,
R. Mazzoleni,
L. Nicastro
, et al. (8 additional authors not shown)
Abstract:
The approach of Observational Astronomy is mainly aimed at the construction of larger aperture telescopes, more sensitive detectors and broader wavelength coverage. Certainly fruitful, this approach turns out to be not completely fulfilling the needs when phenomena related to the formation of black holes (BH), neutron stars (NS) and relativistic stars in general are concerned. Recently, mainly thr…
▽ More
The approach of Observational Astronomy is mainly aimed at the construction of larger aperture telescopes, more sensitive detectors and broader wavelength coverage. Certainly fruitful, this approach turns out to be not completely fulfilling the needs when phenomena related to the formation of black holes (BH), neutron stars (NS) and relativistic stars in general are concerned. Recently, mainly through the Vela, Beppo-SAX and Swift satellites, we reached a reasonable knowledge of the most violent events in the Universe and of some of the processes we believe are leading to the formation of black holes (BH). We plan to open a new window of opportunity to study the variegated physics of very fast astronomical transients, particularly the one related to extreme compact objects. The innovative approach is based on three cornerstones: 1) the design (the conceptual design has been already completed) of a 3m robotic telescope and related focal plane instrumentation characterized by the unique features: "No telescope points faster"; 2) simultaneous multi-wavelengths observations (photometry, spectroscopy o\& polarimetry); 3) high time resolution observations. The conceptual design of the telescope and related instrumentation is optimized to address the following topics: High frequency a-periodic variability, Polarization, High z GRBs, Short GRBs, GRB-Supernovae association, Multi-wavelengths simultaneous photometry and rapid low dispersion spectroscopy. This experiment will turn the "exception" (like the optical observations of GRB 080319B) to "routine".
△ Less
Submitted 10 May, 2010;
originally announced May 2010.
-
Autonomous Observations in Antarctica with AMICA
Authors:
Gianluca Di Rico,
Maurizio Ragni,
Mauro Dolci,
Oscar Straniero,
Angelo Valentini,
Gaetano Valentini,
Amico Di Cianno,
Croce Giuliani,
Demetrio Magrin,
Carlotta Bonoli,
Favio Bortoletto,
Maurizio D'Alessandro,
Leonardo Corcione,
Alberto Riva
Abstract:
The Antarctic Multiband Infrared Camera (AMICA) is a double channel camera operating in the 2-28 micron infrared domain (KLMNQ bands) that will allow to characterize and exploit the exceptional advantages for Astronomy, expected from Dome C in Antarctica. The development of the camera control system is at its final stage. After the investigation of appropriate solutions against the critical envi…
▽ More
The Antarctic Multiband Infrared Camera (AMICA) is a double channel camera operating in the 2-28 micron infrared domain (KLMNQ bands) that will allow to characterize and exploit the exceptional advantages for Astronomy, expected from Dome C in Antarctica. The development of the camera control system is at its final stage. After the investigation of appropriate solutions against the critical environment, a reliable instrumentation has been developed. It is currently being integrated and tested to ensure the correct execution of automatic operations. Once it will be mounted on the International Robotic Antarctic Infrared Telescope (IRAIT), AMICA and its equipment will contribute to the accomplishment of a fully autonomous observatory.
△ Less
Submitted 2 March, 2010;
originally announced March 2010.
-
Optical replication techniques for image slicers
Authors:
J. Schmoll,
D. J. Robertson,
C. M. Dubbeldam,
J. Yao,
F. Bortoletto,
L. Pina,
R. Hudec,
E. Prieto,
C. Norrie,
S. Ramsay-Howat,
W. Preuss
Abstract:
The Smart Focal Planes (SmartFP) activity is a European Joint Research Activity funded to develop novel optical technologies for future large telescope instrumentation. In this paper, we will discuss the image slicer developments being carried out as part of this initiative. Image slicing technique s have many applications in the plans for instrumentation on Extremely Large Telescopes and will b…
▽ More
The Smart Focal Planes (SmartFP) activity is a European Joint Research Activity funded to develop novel optical technologies for future large telescope instrumentation. In this paper, we will discuss the image slicer developments being carried out as part of this initiative. Image slicing technique s have many applications in the plans for instrumentation on Extremely Large Telescopes and will be central to the delivery of the science case. A study of a virtual "multi-object multi-ifu spectrograph and imager" (MOMSI) for a hypothetical OWL-class telescope reveals the need for focal plane splitting, deployable imagers and very small beam steering elements like deployable IFUs. The image slicer workpackage, lead from Durham University in collaboration with LFM Bremen, TNO Delft, UKATC Edinburgh, CRAL Lyon, LAM Marseille, Padua University and REFLEX Prague, is evaluating technologies for manufacturing micro optics in large numbers to enable multi-object integral field spectroscopy.
△ Less
Submitted 29 September, 2005; v1 submitted 22 September, 2005;
originally announced September 2005.
-
Preliminary design of a NIR prime focus corrector for the Galileo Telescope
Authors:
Claudio Pernechele,
Favio Bortoletto,
Paolo Conconi,
Daniele Gardiol,
Emilio Molinari,
Filippo Zerbi
Abstract:
In this paper a preliminary design for a prime focus corrector to be mounted at the Telescopio Nazionale Galileo (TNG) is presented. The telescope is located on La Palma (Canary Islands) and has a primary mirror of 3.5 m with a hyperbolic sag. Two optical designs have been considered in order to exploit detectors with 1k x 1k and 2k x 2k pixels. Each design makes use of four lenses, two of which…
▽ More
In this paper a preliminary design for a prime focus corrector to be mounted at the Telescopio Nazionale Galileo (TNG) is presented. The telescope is located on La Palma (Canary Islands) and has a primary mirror of 3.5 m with a hyperbolic sag. Two optical designs have been considered in order to exploit detectors with 1k x 1k and 2k x 2k pixels. Each design makes use of four lenses, two of which are aspherical. The first lens diameters are, respectively, of 140 mm and 320 mm for the two kind of detectors. For both designs the telescope pupil is deliberately not re-imaged, and therefore it will not be possible to insert a cold stop. For such a reason particular care has been dedicated to the telescope thermal background study, in order to optimise the baffling system. The optics is able to correct fields of 11' x 11' and of 60'x60', depending on the design. It should be considered that the particular geometry of the focal plane array mosaic does not permit a full exploitation of the entire field, being based on a combination of four detectors. The selected chips are HgCdTe manufactured by Rockwell, i.e. Hawaii I in the 1k x 1k case and Hawaii II in the 2k x 2k case.
△ Less
Submitted 6 April, 2000;
originally announced April 2000.
