Showing 1–50 of 65 results for author: de Graaf, J

Hydrodynamic Interactions in Particle Suspensions: A Perspective on Stokesian Dynamics

Authors: Kim William Torre, Joost de Graaf

Abstract: Stokesian Dynamics (SD) is a numerical framework used for simulating hydrodynamic interactions in particle suspensions at low Reynolds number. It combines far-field approximations with near-field lubrication corrections, offering a balance between accuracy and efficiency. This work reviews SD and provides a perspective on future directions for this approach. We outline the mathematical foundations… ▽ More Stokesian Dynamics (SD) is a numerical framework used for simulating hydrodynamic interactions in particle suspensions at low Reynolds number. It combines far-field approximations with near-field lubrication corrections, offering a balance between accuracy and efficiency. This work reviews SD and provides a perspective on future directions for this approach. We outline the mathematical foundations, the method's strengths and weaknesses, and the computational challenges that need to be overcome to work with SD effectively. We also discuss recent advancements that improve the algorithm's efficiency, including the use of iterative solvers and matrix-free approaches. In addition, we highlight the limitations of making stronger, albeit more cost-effective approximations to studying hydrodynamic interactions in dense suspensions than made in SD, such as the two-body Rotne-Prager-Yamakawa (RPY) approximation. To overcome these issues, we propose a hybrid framework that replaces SD's full many-body computations with a neural network trained on SD data. That is, we correct the RPY approximation, while avoiding costly matrix inversions. We demonstrate the potential of this method on a simple system, where we find a close match to SD data while algorithmically outperforming RPY. Our work provides an outlook on the way in which large-scale simulations of particle suspensions can be performed in the foreseeable future. △ Less

Submitted 20 March, 2025; originally announced March 2025.

Python-JAX-based Fast Stokesian Dynamics

Authors: Kim William Torre, Raoul D. Schram, Joost de Graaf

Abstract: Stokesian Dynamics (SD) is a powerful computational framework for simulating the motion of particles in a viscous Newtonian fluid under Stokes-flow conditions. Traditional SD implementations can be computationally expensive as they rely on the inversion of large mobility matrices to determine hydrodynamic interactions. Recently, however, the simulation of thermalized systems with large numbers of… ▽ More Stokesian Dynamics (SD) is a powerful computational framework for simulating the motion of particles in a viscous Newtonian fluid under Stokes-flow conditions. Traditional SD implementations can be computationally expensive as they rely on the inversion of large mobility matrices to determine hydrodynamic interactions. Recently, however, the simulation of thermalized systems with large numbers of particles has become feasible [Fiore and Swan, J. Fluid. Mech. $\textbf{878}$, 544 (2019)]. Their ``fast Stokesian dynamics'' (FSD) method leverages a saddle-point formulation to ensure overall scaling of the algorithm that is linear in the number of particles $\mathcal{O}(N)$; performance relies on dedicated graphics-processing-unit computing. Here, we present a different route toward implementing FSD, which instead leverages the Just-in-Time (JIT) compilation capabilities of Google JAX. We refer to this implementation as JFSD and perform benchmarks on it to verify that it has the right scaling and is sufficiently fast by the standards of modern computational physics. In addition, we provide a series of physical test cases that help ensure accuracy and robustness, as the code undergoes further development. Thus, JFSD is ready to facilitate the study of hydrodynamic effects in particle suspensions across the domains of soft, active, and granular matter. △ Less

Submitted 10 March, 2025; originally announced March 2025.

Fluid-Derived Lattices for Unbiased Modeling of Bacterial Colony Growth

Authors: Bryan Verhoef, Rutger Hermsen, Joost de Graaf

Abstract: Bacterial colonies can form a wide variety of shapes and structures based on ambient and internal conditions. To help understand the mechanisms that determine the structure of and the diversity within these colonies, various numerical modeling techniques have been applied. The most commonly used ones are continuum models, agent-based models, and lattice models. Continuum models are usually computa… ▽ More Bacterial colonies can form a wide variety of shapes and structures based on ambient and internal conditions. To help understand the mechanisms that determine the structure of and the diversity within these colonies, various numerical modeling techniques have been applied. The most commonly used ones are continuum models, agent-based models, and lattice models. Continuum models are usually computationally fast, but disregard information at the level of the individual, which can be crucial to understanding diversity in a colony. Agent-based models resolve local details to a greater level, but are computationally costly. Lattice-based approaches strike a balance between these two limiting cases. However, this is known to come at the price of introducing undesirable artifacts into the structure of the colonies. For instance, square lattices tend to produce square colonies even where an isotropic shape is expected. Here, we aim to overcome these limitations and therefore study lattice-induced orientational symmetry in a class of hybrid numerical methods that combine aspects of lattice-based and continuum descriptions. We characterize these artifacts and show that they can be circumvented through the use of a disordered lattice which derives from an unstructured fluid. The main advantage of this approach is that the lattice itself does not imbue the colony with a preferential directionality. We demonstrate that our implementation enables the study of colony growth involving millions of individuals within hours of computation time on an ordinary desktop computer, while retaining many of the desirable features of agent-based models. Furthermore, our method can be readily adapted for a wide range of applications, opening up new avenues for studying the formation of colonies with diverse shapes and complex internal interactions. △ Less

Submitted 23 December, 2024; originally announced December 2024.

Comments: 36 pages, 13 figures

The motion of catalytically active colloids approaching a surface

Authors: Julio Melio, Solenn Riedel, Ali Azadbakht, Silvana A. Caipa Cure, Tom M. J. Evers, Mehrad Babaei, Alireza Mashaghi, Joost de Graaf, Daniela J. Kraft

Abstract: Catalytic microswimmers typically swim close to walls due to hydrodynamic and/or phoretic effects. The walls in turn are known to affect their propulsion, making it difficult to single out the contributions that stem from particle-based catalytic propulsion only, thereby preventing an understanding of the propulsion mechanism. Here, we use acoustic tweezers to lift catalytically active Janus spher… ▽ More Catalytic microswimmers typically swim close to walls due to hydrodynamic and/or phoretic effects. The walls in turn are known to affect their propulsion, making it difficult to single out the contributions that stem from particle-based catalytic propulsion only, thereby preventing an understanding of the propulsion mechanism. Here, we use acoustic tweezers to lift catalytically active Janus spheres away from the wall to study their motion in bulk and when approaching a wall. Mean-squared displacement analysis shows that diffusion constants at different heights match with Faxén's prediction for the near-wall hydrodynamic mobility. Both particles close to a substrate and in bulk show a decrease in velocity with increasing salt concentration, suggesting that the dominant factor for the decrease in speed is a reduction of the swimmer-based propulsion. The velocity-height profile follows a hydrodynamic scaling relation as well, implying a coupling between the wall and the swimming speed. The observed speed reduction upon addition of salt matches expectations from a electrokinetic theory, except for experiments in 0.1 wt% hydrogen peroxide in bulk, which could indicate contributions from a different propulsion mechanism. Our results help with the understanding of ionic effects on microswimmers in 3D and point to a coupling between the wall and the particle that affects its self-propulsion speed. △ Less

Submitted 18 November, 2024; originally announced November 2024.

The Geometry behind the Two-Dimensional Hard-Disk 'Glass Transition'

Authors: Joost de Graaf

Abstract: The relation between dynamics and structure in systems of bidisperse 2D hard disks with apparent arrested dynamics is considered using numerical simulations and Voronoi analysis. Surprisingly, the suspensions systematically appear to fall out of equilibrium at an area fraction of φ {\approx} 0.777 over a wide range of disk-size ratios. This is in close agreement with the experimental findings of [… ▽ More The relation between dynamics and structure in systems of bidisperse 2D hard disks with apparent arrested dynamics is considered using numerical simulations and Voronoi analysis. Surprisingly, the suspensions systematically appear to fall out of equilibrium at an area fraction of φ {\approx} 0.777 over a wide range of disk-size ratios. This is in close agreement with the experimental findings of [Lozano et al., Nat. Mater. 18, 1118 (2019)] for a single large-to-small size ratio of {\approx} 1.4. Even inside the crystalline region of the state diagram there are weak structural signatures present for this area fraction. Adopting a granocentric viewpoint, this allows for the identification of a geometric feature - a floret pentagonal tiling - that could underlie the observations. That is, this tiling has an area fraction of φ {\approx} 0.777343, which closely matches the apparent 'glass transition' value of φ. The connection suggests that a zero-entropy, ground-state tiling can influence the dynamics of the system at finite temperature, in a manner that may be similar to the way in which geometry in foam-like tissue models induces a jamming transition. A geometric ground-state argument also appears to explain the change in local dynamics observed by [Li et al., Nature 587, 225 (2020)], when a honeycomb lattice is used as the reference. Combined these findings change how to view high-φ 2D fluids, namely as being influenced by the presence of zero-entropy geometric ground states. The proposed connection leads to an unexpected (dynamic) transition in the finite-temperature system, which can be mistaken for a(n onset) glass transition, but is in a class of its own. There is also a tentative connection to random loose packing for frictional systems. An outlook is provided on how this concept may be extended to soft-particle systems and into higher dimensions. △ Less

Submitted 2 November, 2024; originally announced November 2024.

Comments: 26 pages, 12 figures

Quantum Control of an Oscillator with a Kerr-cat Qubit

Authors: Andy Z. Ding, Benjamin L. Brock, Alec Eickbusch, Akshay Koottandavida, Nicholas E. Frattini, Rodrigo G. Cortinas, Vidul R. Joshi, Stijn J. de Graaf, Benjamin J. Chapman, Suhas Ganjam, Luigi Frunzio, Robert J. Schoelkopf, Michel H. Devoret

Abstract: Bosonic codes offer a hardware-efficient strategy for quantum error correction by redundantly encoding quantum information in the large Hilbert space of a harmonic oscillator. However, experimental realizations of these codes are often limited by ancilla errors propagating to the encoded logical qubit during syndrome measurements. The Kerr-cat qubit has been proposed as an ancilla for these codes… ▽ More Bosonic codes offer a hardware-efficient strategy for quantum error correction by redundantly encoding quantum information in the large Hilbert space of a harmonic oscillator. However, experimental realizations of these codes are often limited by ancilla errors propagating to the encoded logical qubit during syndrome measurements. The Kerr-cat qubit has been proposed as an ancilla for these codes due to its theoretically-exponential noise bias, which would enable fault-tolerant error syndrome measurements, but the coupling required to perform these syndrome measurements has not yet been demonstrated. In this work, we experimentally realize driven parametric coupling of a Kerr-cat qubit to a high-quality-factor microwave cavity and demonstrate a gate set enabling universal quantum control of the cavity. We measure the decoherence of the cavity in the presence of the Kerr-cat and discover excess dephasing due to heating of the Kerr-cat to excited states. By engineering frequency-selective dissipation to counteract this heating, we are able to eliminate this dephasing, thereby demonstrating a high on-off ratio of control. Our results pave the way toward using the Kerr-cat to fault-tolerantly measure error syndromes of bosonic codes. △ Less

Submitted 15 July, 2024; originally announced July 2024.

A mid-circuit erasure check on a dual-rail cavity qubit using the joint-photon number-splitting regime of circuit QED

Authors: Stijn J. de Graaf, Sophia H. Xue, Benjamin J. Chapman, James D. Teoh, Takahiro Tsunoda, Patrick Winkel, John W. O. Garmon, Kathleen M. Chang, Luigi Frunzio, Shruti Puri, Robert J. Schoelkopf

Abstract: Quantum control of a linear oscillator using a static dispersive coupling to a nonlinear ancilla underpins a wide variety of experiments in circuit QED. Extending this control to more than one oscillator while minimizing the required connectivity to the ancilla would enable hardware-efficient multi-mode entanglement and measurements. We show that the spectrum of an ancilla statically coupled to a… ▽ More Quantum control of a linear oscillator using a static dispersive coupling to a nonlinear ancilla underpins a wide variety of experiments in circuit QED. Extending this control to more than one oscillator while minimizing the required connectivity to the ancilla would enable hardware-efficient multi-mode entanglement and measurements. We show that the spectrum of an ancilla statically coupled to a single mode can be made to depend on the joint photon number in two modes by applying a strong parametric beamsplitter coupling between them. This `joint-photon number-splitting' regime extends single-oscillator techniques to two-oscillator control, which we use to realize a hardware-efficient erasure check for a dual-rail qubit encoded in two superconducting cavities. By leveraging the beamsplitter coupling already required for single-qubit gates, this scheme permits minimal connectivity between circuit elements. Furthermore, the flexibility to choose the pulse shape allows us to limit the susceptibility to different error channels. We use this scheme to detect leakage errors with a missed erasure fraction of $(9.0 \pm 0.5)\times10^{-4}$, while incurring an erasure rate of $2.92 \pm 0.01\%$ and a Pauli error rate of $0.31 \pm 0.01\%$, both of which are dominated by cavity errors. △ Less

Submitted 13 August, 2024; v1 submitted 20 June, 2024; originally announced June 2024.

Comments: Updated references

Schrödinger Unitary Cellular Automata

Authors: Kees van Berkel, Jan de Graaf, Kees van Hee

Abstract: We propose a class of cellular automata for the Hamiltonian of a free particle. It is based on a two-step unitary evolution operator in discrete time and space. Various experiments with one and two-dimensional cellular automata are used to analyze 1) phase velocities of plane waves, 2) dispersion and group velocities of wavepackets, 3) energy levels of infinite potential wells and harmonic oscilla… ▽ More We propose a class of cellular automata for the Hamiltonian of a free particle. It is based on a two-step unitary evolution operator in discrete time and space. Various experiments with one and two-dimensional cellular automata are used to analyze 1) phase velocities of plane waves, 2) dispersion and group velocities of wavepackets, 3) energy levels of infinite potential wells and harmonic oscillators, and 4) interference from double-slit diffraction. Some of the differences between their known (analytical) results and the cellular-automata approximations are intriguing. △ Less

Submitted 12 June, 2024; originally announced June 2024.

Delayed Gravitational Collapse of Attractive Colloidal Suspensions

Authors: Kim William Torre, Joost de Graaf

Abstract: Colloidal gels have strong industrial relevance as they can behave liquid- and solid-like. The latter allows them to support the buoyant weight against gravity. However, the system is intrinsically out-of-equilibrium, which means that the colloids must eventually settle out of the suspension. The process of settling has been captured theoretically, but the presence of a delay time during which the… ▽ More Colloidal gels have strong industrial relevance as they can behave liquid- and solid-like. The latter allows them to support the buoyant weight against gravity. However, the system is intrinsically out-of-equilibrium, which means that the colloids must eventually settle out of the suspension. The process of settling has been captured theoretically, but the presence of a delay time during which the gel appears relatively unaffected by gravity has not. Here, we modify existing frameworks to capture this delay, by treating the gel as a continuum with viscoelastic response that is based on the local bond density. We can solve our model numerically to obtain the evolution of the colloid density profile and recover qualitatively the accumulation of a dense layer on top of the settling gel, as is experimentally observed in depletion gels. This numerical study is complemented by a theoretical analysis that allows us to identify an emergent time and length scale that set the dynamics of the gel. Our model provides a solid foundation for future studies that incorporate hydrodynamic erosion and tackle industrially relevant geometries. △ Less

Submitted 25 May, 2024; originally announced May 2024.

The Cellular Potts Model on Disordered Lattices

Authors: Hossein Nemati, Joost de Graaf

Abstract: The Cellular Potts model, also known as the Glazier-Graner-Hogeweg model, is a lattice-based approach by which biological tissues at the level of individual cells can be numerically studied. Traditionally, a square or hexagonal underlying lattice structure is assumed for two-dimensional systems, and this is known to introduce artifacts in the structure and dynamics of the model tissues. That is, o… ▽ More The Cellular Potts model, also known as the Glazier-Graner-Hogeweg model, is a lattice-based approach by which biological tissues at the level of individual cells can be numerically studied. Traditionally, a square or hexagonal underlying lattice structure is assumed for two-dimensional systems, and this is known to introduce artifacts in the structure and dynamics of the model tissues. That is, on regular lattices, cells can assume shapes that are dictated by the symmetries of the underlying lattice. Here, we developed a variant of this method that can be applied to a broad class of (ir)regular lattices. We show that on an irregular lattice deriving from a fluid-like configuration, two types of artifacts can be removed. We further report on the transition between a fluid-like disordered and a solid-like hexagonally ordered phase present for monodisperse confluent cells as a function of their surface tension. This transition shows the hallmarks of a first-order phase transition and is different from the glass/jamming transitions commonly reported for the vertex and active Voronoi models. We emphasize this by analyzing the distribution of shape parameters found in our state space. Our analysis provides a useful reference for the future study of epithelia using the (ir)regular Cellular Potts model. △ Less

Submitted 11 October, 2024; v1 submitted 13 April, 2024; originally announced April 2024.

Comments: This paper has been accepted for publication in Soft Matter as an open-access article, available at the DOI provided. A major revision was made during the review process, changing the method for capturing the transition point using the effective self-diffusion coefficient instead of the mean square displacement scaling exponent. We thank the reviewers for their constructive feedback

Demonstrating a superconducting dual-rail cavity qubit with erasure-detected logical measurements

Authors: Kevin S. Chou, Tali Shemma, Heather McCarrick, Tzu-Chiao Chien, James D. Teoh, Patrick Winkel, Amos Anderson, Jonathan Chen, Jacob Curtis, Stijn J. de Graaf, John W. O. Garmon, Benjamin Gudlewski, William D. Kalfus, Trevor Keen, Nishaad Khedkar, Chan U Lei, Gangqiang Liu, Pinlei Lu, Yao Lu, Aniket Maiti, Luke Mastalli-Kelly, Nitish Mehta, Shantanu O. Mundhada, Anirudh Narla, Taewan Noh , et al. (9 additional authors not shown)

Abstract: A critical challenge in developing scalable error-corrected quantum systems is the accumulation of errors while performing operations and measurements. One promising approach is to design a system where errors can be detected and converted into erasures. Such a system utilizing erasure qubits are known to have relaxed requirements for quantum error correction. A recent proposal aims to do this usi… ▽ More A critical challenge in developing scalable error-corrected quantum systems is the accumulation of errors while performing operations and measurements. One promising approach is to design a system where errors can be detected and converted into erasures. Such a system utilizing erasure qubits are known to have relaxed requirements for quantum error correction. A recent proposal aims to do this using a dual-rail encoding with superconducting cavities. However, experimental characterization and demonstration of a dual-rail cavity qubit has not yet been realized. In this work, we implement such a dual-rail cavity qubit; we demonstrate a projective logical measurement with integrated erasure detection and use it to measure dual-rail qubit idling errors. We measure logical state preparation and measurement errors at the $0.01\%$-level and detect over $99\%$ of cavity decay events as erasures. We use the precision of this new measurement protocol to distinguish different types of errors in this system, finding that while decay errors occur with probability $\sim 0.2\%$ per microsecond, phase errors occur 6 times less frequently and bit flips occur at least 140 times less frequently. These findings represent the first confirmation of the expected error hierarchy necessary to concatenate dual-rail erasure qubits into a highly efficient erasure code. △ Less

Submitted 13 October, 2023; v1 submitted 6 July, 2023; originally announced July 2023.

Hydrodynamic Lubrication in Colloidal Gels

Authors: Kim William Torre, Joost de Graaf

Abstract: Colloidal gels are elasto-plastic materials composed of an out-of-equilibrium, self-assembled network of micron-sized (solid) particles suspended in a fluid. Recent work has shown that far-field hydrodynamic interactions do not change gel structure, only the rate at which the network forms and ages. However, during gel formation, the interplay between short-ranged attractions leading to gelation a… ▽ More Colloidal gels are elasto-plastic materials composed of an out-of-equilibrium, self-assembled network of micron-sized (solid) particles suspended in a fluid. Recent work has shown that far-field hydrodynamic interactions do not change gel structure, only the rate at which the network forms and ages. However, during gel formation, the interplay between short-ranged attractions leading to gelation and equally short-ranged hydrodynamic lubrication interactions remains poorly understood. Here, we therefore study gelation using a range of hydrodynamic descriptions: from single-body (Brownian Dynamics), to pairwise (Rotne-Prager-Yamakawa), to (non-)lubrication-corrected many-body (Stokesian Dynamics). We confirm the current understanding informed by simulations accurate in the far-field. Yet, we find that accounting for lubrication can strongly impact structure at low colloid volume fraction. Counterintuitively, strongly dissipative lubrication interactions also accelerate the aging of a gel, irrespective of colloid volume fraction. Both elements can be explained by lubrication forces facilitating collective dynamics and therefore phase-separation. Our findings indicate that despite the computational cost, lubricated hydrodynamic modeling with many-body far-field interactions is needed to accurately capture the evolution of the gel structure. △ Less

Submitted 20 June, 2023; originally announced June 2023.

Hydrodynamic Stability Criterion for Colloidal Gelation under Gravity

Authors: Joost de Graaf, Kim William Torre, Wilson C. K. Poon, Michiel Hermes

Abstract: Attractive colloids diffuse and aggregate to form gels, solid-like particle networks suspended in a fluid. Gravity is known to strongly impact the stability of gels once they are formed. However, its effect on the process of gel formation has seldom been studied. Here, we simulate the effect of gravity on gelation using both Brownian dynamics and a lattice-Boltzmann algorithm that accounts for hyd… ▽ More Attractive colloids diffuse and aggregate to form gels, solid-like particle networks suspended in a fluid. Gravity is known to strongly impact the stability of gels once they are formed. However, its effect on the process of gel formation has seldom been studied. Here, we simulate the effect of gravity on gelation using both Brownian dynamics and a lattice-Boltzmann algorithm that accounts for hydrodynamic interactions. We work in a confined geometry to capture macroscopic, buoyancy-induced flows driven by the density mismatch between fluid and colloids. These flows give rise to a stability criterion for network formation, based on an effective accelerated sedimentation of nascent clusters at low volume fractions that disrupts gelation. Above a critical volume fraction, mechanical strength in the forming gel network dominates the dynamics: the interface between the colloid-rich and colloid-poor region moves downward at an ever decreasing rate. Finally, we analyze the asymptotic state, the colloidal gel-like sediment, which we find not to be appreciably impacted by the vigorous flows that can occur during the settling of the colloids. Our findings represent the first steps toward understanding how flow during formation affects the life span of colloidal gels. △ Less

Submitted 24 March, 2023; originally announced March 2023.

Comments: 14 pages, 15 figures, 3 movies

An Appropriate Probability Model for the Bell Experiment

Authors: Kees van Hee, Kees van Berkel, Jan de Graaf

Abstract: The Bell inequality constrains the outcomes of measurements on pairs of distant entangled particles. The Bell contradiction states that the Bell inequality is inconsistent with the calculated outcomes of these quantum experiments. This contradiction led many to question the underlying assumptions, viz. so-called realism and locality. This paper proposes an appropriate probability model for the B… ▽ More The Bell inequality constrains the outcomes of measurements on pairs of distant entangled particles. The Bell contradiction states that the Bell inequality is inconsistent with the calculated outcomes of these quantum experiments. This contradiction led many to question the underlying assumptions, viz. so-called realism and locality. This paper proposes an appropriate probability model for the Bell experiment. This model has only two simultaneously observable detector settings per measurement, and therefore does not assume realism. It is in full agreement with both quantum mechanics and experiments. In this model the expectation for a particular pair of observations is partial to the selected detector settings. This leads to a slightly different variant of the Bell inequality, one that is consistent with both quantum mechanics and measurements. In this model there is no Bell contradiction. Furthermore, the proposed probability model is statistically local, is not factorizable, and is not Bell-separable. The latter implies that either hidden variables must be ruled out, or that locality must be violated. Thus, our conclusion agrees with Bell's conclusion. △ Less

Submitted 10 February, 2023; originally announced February 2023.

Dual-rail encoding with superconducting cavities

Authors: James D. Teoh, Patrick Winkel, Harshvardhan K. Babla, Benjamin J. Chapman, Jahan Claes, Stijn J. de Graaf, John W. O. Garmon, William D. Kalfus, Yao Lu, Aniket Maiti, Kaavya Sahay, Neel Thakur, Takahiro Tsunoda, Sophia H. Xue, Luigi Frunzio, Steven M. Girvin, Shruti Puri, Robert J. Schoelkopf

Abstract: The design of quantum hardware that reduces and mitigates errors is essential for practical quantum error correction (QEC) and useful quantum computation. To this end, we introduce the circuit-Quantum Electrodynamics (QED) dual-rail qubit in which our physical qubit is encoded in the single-photon subspace of two superconducting microwave cavities. The dominant photon loss errors can be detected a… ▽ More The design of quantum hardware that reduces and mitigates errors is essential for practical quantum error correction (QEC) and useful quantum computation. To this end, we introduce the circuit-Quantum Electrodynamics (QED) dual-rail qubit in which our physical qubit is encoded in the single-photon subspace of two superconducting microwave cavities. The dominant photon loss errors can be detected and converted into erasure errors, which are in general much easier to correct. In contrast to linear optics, a circuit-QED implementation of the dual-rail code offers unique capabilities. Using just one additional transmon ancilla per dual-rail qubit, we describe how to perform a gate-based set of universal operations that includes state preparation, logical readout, and parametrizable single and two-qubit gates. Moreover, first-order hardware errors in the cavities and the transmon can be detected and converted to erasure errors in all operations, leaving background Pauli errors that are orders of magnitude smaller. Hence, the dual-rail cavity qubit exhibits a favorable hierarchy of error rates and is expected to perform well below the relevant QEC thresholds with today's coherence times. △ Less

Submitted 16 October, 2023; v1 submitted 22 December, 2022; originally announced December 2022.

A high on-off ratio beamsplitter interaction for gates on bosonically encoded qubits

Authors: Benjamin J. Chapman, Stijn J. de Graaf, Sophia H. Xue, Yaxing Zhang, James Teoh, Jacob C. Curtis, Takahiro Tsunoda, Alec Eickbusch, Alexander P. Read, Akshay Koottandavida, Shantanu O. Mundhada, Luigi Frunzio, M. H. Devoret, S. M. Girvin, R. J. Schoelkopf

Abstract: Encoding a qubit in a high quality superconducting microwave cavity offers the opportunity to perform the first layer of error correction in a single device, but presents a challenge: how can quantum oscillators be controlled while introducing a minimal number of additional error channels? We focus on the two-qubit portion of this control problem by using a 3-wave mixing coupling element to engine… ▽ More Encoding a qubit in a high quality superconducting microwave cavity offers the opportunity to perform the first layer of error correction in a single device, but presents a challenge: how can quantum oscillators be controlled while introducing a minimal number of additional error channels? We focus on the two-qubit portion of this control problem by using a 3-wave mixing coupling element to engineer a programmable beamsplitter interaction between two bosonic modes separated by more than an octave in frequency, without introducing major additional sources of decoherence. Combining this with single-oscillator control provided by a dispersively coupled transmon provides a framework for quantum control of multiple encoded qubits. The beamsplitter interaction $g_\text{bs}$ is fast relative to the timescale of oscillator decoherence, enabling over $10^3$ beamsplitter operations per coherence time, and approaching the typical rate of the dispersive coupling $χ$ used for individual oscillator control. Further, the programmable coupling is engineered without adding unwanted interactions between the oscillators, as evidenced by the high on-off ratio of the operations, which can exceed $10^5$. We then introduce a new protocol to realize a hybrid controlled-SWAP operation in the regime $g_{bs}\approxχ$, in which a transmon provides the control bit for the SWAP of two bosonic modes. Finally, we use this gate in a SWAP test to project a pair of bosonic qubits into a Bell state with measurement-corrected fidelity of $95.5\% \pm 0.2\%$. △ Less

Submitted 2 July, 2023; v1 submitted 22 December, 2022; originally announced December 2022.

Comments: 8 pages main text, 29 pages with appendices. 16 figures. Published version is open access and available here: https://journals.aps.org/prxquantum/abstract/10.1103/PRXQuantum.4.020355

Journal ref: PRX Quantum 4, 020355. Published 28 June 2023

Error-detectable bosonic entangling gates with a noisy ancilla

Authors: Takahiro Tsunoda, James D. Teoh, William D. Kalfus, Stijn J. de Graaf, Benjamin J. Chapman, Jacob C. Curtis, Neel Thakur, Steven M. Girvin, Robert J. Schoelkopf

Abstract: Bosonic quantum error correction has proven to be a successful approach for extending the coherence of quantum memories, but to execute deep quantum circuits, high-fidelity gates between encoded qubits are needed. To that end, we present a family of error-detectable two-qubit gates for a variety of bosonic encodings. From a new geometric framework based on a "Bloch sphere" of bosonic operators, we… ▽ More Bosonic quantum error correction has proven to be a successful approach for extending the coherence of quantum memories, but to execute deep quantum circuits, high-fidelity gates between encoded qubits are needed. To that end, we present a family of error-detectable two-qubit gates for a variety of bosonic encodings. From a new geometric framework based on a "Bloch sphere" of bosonic operators, we construct $ZZ_L(θ)$ and $\text{eSWAP}(θ)$ gates for the binomial, 4-legged cat, dual-rail and several other bosonic codes. The gate Hamiltonian is simple to engineer, requiring only a programmable beamsplitter between two bosonic qubits and an ancilla dispersively coupled to one qubit. This Hamiltonian can be realized in circuit QED hardware with ancilla transmons and microwave cavities. The proposed theoretical framework was developed for circuit QED but is generalizable to any platform that can effectively generate this Hamiltonian. Crucially, one can also detect first-order errors in the ancilla and the bosonic qubits during the gates. We show that this allows one to reach error-detected gate fidelities at the $10^{-4}$ level with today's hardware, limited only by second-order hardware errors. △ Less

Submitted 21 December, 2022; originally announced December 2022.

Comments: 21 pages, 8 figures

Structuring Colloidal Gels via Micro-Bubble Oscillations

Authors: Kim William Torre, Joost de Graaf

Abstract: Locally (re)structuring colloidal gels $\unicode{x2013}$ micron-sized particles forming a connected network with arrested dynamics $\unicode{x2013}$ enables precise tuning of the micromechanical and -rheological properties of the system. A recent experimental study [B. Saint-Michel, G. Petekidis, and V. Garbin, Soft Matter $\boldsymbol{18}$, 2092 (2022)] showed that rapid restructuring can occur b… ▽ More Locally (re)structuring colloidal gels $\unicode{x2013}$ micron-sized particles forming a connected network with arrested dynamics $\unicode{x2013}$ enables precise tuning of the micromechanical and -rheological properties of the system. A recent experimental study [B. Saint-Michel, G. Petekidis, and V. Garbin, Soft Matter $\boldsymbol{18}$, 2092 (2022)] showed that rapid restructuring can occur by acoustically modulating an embedded microbubble. Here, we perform Brownian dynamics simulations to understand the mechanical effect of an oscillating microbubble on the structure of the embedding colloidal gel. Our simulations reveal a hexagonal-close-packed restructuring in a range that is comparable to the amplitude of the oscillations. However, we were unable to reproduce the unexpectedly long-ranged modification of the gel structure $\unicode{x2013}$ dozens of amplitudes $\unicode{x2013}$ observed in experiment. This suggests including long-ranged effects, such as fluid flow, should be considered in future work. △ Less

Submitted 4 November, 2022; originally announced November 2022.

Comments: 7 pages, 6 figures

A fast recurrence for Fibonacci and Lucas numbers

Authors: Jeroen van de Graaf

Abstract: We derive the double recurrence $e_n = \frac{1}{2}(a_{n-1}+5b_{n-1}); f_{n} = \frac{1}{2}(a_{n-1}+b_{n-1})$ with $e_0=2;f_0=0$ for the Fibonacci numbers, leading to an extremely simple and fast implementation. Though the recurrence is probably not new, we have not been able to find a reference for it. We derive the double recurrence $e_n = \frac{1}{2}(a_{n-1}+5b_{n-1}); f_{n} = \frac{1}{2}(a_{n-1}+b_{n-1})$ with $e_0=2;f_0=0$ for the Fibonacci numbers, leading to an extremely simple and fast implementation. Though the recurrence is probably not new, we have not been able to find a reference for it. △ Less

Submitted 16 December, 2021; originally announced December 2021.

Amphibious Transport of Fluids and Solids by Soft Magnetic Carpets

Authors: Ahmet F. Demirörs, Sümeyye Aykut, Sophia Ganzeboom, Yuki Meier, Robert Hardeman, Joost de Graaf, Arnold J. T. M. Mathijssen, Erik Poloni, Julia A. Carpenter, Caner Unlu, Daniel Zenhausern

Abstract: One of the major challenges in modern robotics is controlling micromanipulation by active and adaptive materials. In the respiratory system, such actuation enables pathogen clearance by means of motile cilia. While various types of artificial cilia have been engineered recently, they often involve complex manufacturing protocols and focus on transporting liquids only. Here, we create soft magnetic… ▽ More One of the major challenges in modern robotics is controlling micromanipulation by active and adaptive materials. In the respiratory system, such actuation enables pathogen clearance by means of motile cilia. While various types of artificial cilia have been engineered recently, they often involve complex manufacturing protocols and focus on transporting liquids only. Here, we create soft magnetic carpets via an easy self-assembly route based on the Rosensweig instability. These carpets can transport liquids but also solid objects that are larger and heavier than the artificial cilia, using a crowd-surfing effect. This amphibious transportation is locally and reconfigurably tuneable by simple micromagnets or advanced programmable magnetic fields with a high degree of spatial resolution. We identify and model two surprising cargo reversal effects due to collective ciliary motion and non-trivial elastohydrodynamics. While our active carpets are generally applicable to integrated control systems for transport, mixing and sorting, these effects could also be exploited for microfluidic viscosimetry and elastometry. △ Less

Submitted 22 August, 2021; originally announced August 2021.

Regulating Aggregation of Colloidal Particles in an Electro-Osmotic Micropump

Authors: Zhu Zhang, Joost de Graaf, Sanli Faez

Abstract: Unrestricted particle transport through microfluidic channels is of paramount importance to a wide range of applications, including lab-on-a-chip devices. In this article, we study using video microscopy the electro-osmotic aggregation of colloidal particles at the opening of a micrometer-sized silica channel in presence of a salt gradient. Particle aggregation eventually leads to clogging of the… ▽ More Unrestricted particle transport through microfluidic channels is of paramount importance to a wide range of applications, including lab-on-a-chip devices. In this article, we study using video microscopy the electro-osmotic aggregation of colloidal particles at the opening of a micrometer-sized silica channel in presence of a salt gradient. Particle aggregation eventually leads to clogging of the channel, which may be undone by a time-adjusted reversal of the applied electric potential. We numerically model our system via the Stokes-Poisson-Nernst-Planck equations in a geometry that approximates the real sample. This allows us to identify the transport processes induced by the electric field and salt gradient and to provide evidence that a balance thereof leads to aggregation. We further demonstrate experimentally that a net flow of colloids through the channel may be achieved by applying a square-waveform electric potential with an appropriately tuned duty cycle. Our results serve to guide the design of microfluidic and nanofluidic pumps that allow for controlled particle transport and provide new insights for anti-fouling in ultra-filtration. △ Less

Submitted 31 March, 2021; originally announced April 2021.

Comments: 9 pages, 7 figures

Journal ref: Soft Matter, 2020, 16, 10707-10715

Activity-induced microswimmer interactions and cooperation in one-dimensional environments

Authors: Stefania Ketzetzi, Melissa Rinaldin, Pim Dröge, Joost de Graaf, Daniela J. Kraft

Abstract: Cooperative motion in biological microswimmers is crucial for their survival as it facilitates adhesion to surfaces, formation of hierarchical colonies, efficient motion, and enhanced access to nutrients. Synthetic microswimmers currently lack truly cooperative behavior that originates from activity-induced interactions. Here, we demonstrate that catalytic microswimmers show a variety of cooperati… ▽ More Cooperative motion in biological microswimmers is crucial for their survival as it facilitates adhesion to surfaces, formation of hierarchical colonies, efficient motion, and enhanced access to nutrients. Synthetic microswimmers currently lack truly cooperative behavior that originates from activity-induced interactions. Here, we demonstrate that catalytic microswimmers show a variety of cooperative behaviors along one-dimensional paths. We show that their speed increases with the number of swimmers, while the activity induces a preferred distance between swimmers. Using a minimal model, we ascribe this behavior to an effective activity-induced potential that stems from a competition between chemical and hydrodynamic coupling. These interactions further induce active self-assembly into trains as well as compact chains that can elongate, break-up, become immobilized and remobilized. We identify the crucial role that environment morphology and swimmer directionality play on these highly dynamic chain behaviors. These activity-induced interactions open the door towards exploiting cooperation for increasing the efficiency of, as well as provide temporal and spatial control over, microswimmer motion, thereby enabling them to perform intricate tasks inside complex environments. △ Less

Submitted 12 March, 2021; originally announced March 2021.

Journal ref: Nature Communications 13, 1772 (2022)

Autonomously Probing Viscoelasticity in Disordered Suspensions

Authors: Clara Abaurrea-Velasco, Celia Lozano, Clemens Bechinger, Joost de Graaf

Abstract: Recent experiments show a strong rotational-diffusion enhancement for self-propelled microrheological probes in colloidal glasses. Here, we provide microscopic understanding using simulations with a frictional probe-medium coupling that converts active translation into rotation. Diffusive enhancement emerges from the medium's disordered structure and peaks at a second-order transition in the numbe… ▽ More Recent experiments show a strong rotational-diffusion enhancement for self-propelled microrheological probes in colloidal glasses. Here, we provide microscopic understanding using simulations with a frictional probe-medium coupling that converts active translation into rotation. Diffusive enhancement emerges from the medium's disordered structure and peaks at a second-order transition in the number of contacts. Our results reproduce the salient features of the colloidal glass experiment and support an effective description that is applicable to a broader class of viscoelastic suspensions. △ Less

Submitted 19 December, 2020; originally announced December 2020.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 125, 258002 (2020)

Height Distribution and Orientation of Colloidal Dumbbells Near a Wall

Authors: Ruben W. Verweij, Stefania Ketzetzi, Joost de Graaf, Daniela J. Kraft

Abstract: Geometric confinement strongly influences the behavior of microparticles in liquid environments. However, to date, nonspherical particle behaviors close to confining boundaries, even as simple as planar walls, remain largely unexplored. Here, we measure the height distribution and orientation of colloidal dumbbells above walls by means of digital in-line holographic microscopy. We find that while… ▽ More Geometric confinement strongly influences the behavior of microparticles in liquid environments. However, to date, nonspherical particle behaviors close to confining boundaries, even as simple as planar walls, remain largely unexplored. Here, we measure the height distribution and orientation of colloidal dumbbells above walls by means of digital in-line holographic microscopy. We find that while larger dumbbells are oriented almost parallel to the wall, smaller dumbbells of the same material are surprisingly oriented at preferred angles. We determine the total height-dependent force acting on the dumbbells by considering gravitational effects and electrostatic particle-wall interactions. Our modeling reveals that at specific heights both net forces and torques on the dumbbells are simultaneously below the thermal force and energy, respectively, which makes the observed orientations possible. Our results highlight the rich near-wall dynamics of nonspherical particles, and can further contribute to the development of quantitative frameworks for arbitrarily-shaped microparticle dynamics in confinement. △ Less

Submitted 22 December, 2020; v1 submitted 30 September, 2020; originally announced September 2020.

Comments: Ruben W. Verweij and Stefania Ketzetzi contributed equally to this work. 17 pages and 7 figures

Journal ref: Phys. Rev. E 102, 062608 (2020)

An extensible lattice Boltzmann method for viscoelastic flows: complex and moving boundaries in Oldroyd-B fluids

Authors: Michael Kuron, Cameron Stewart, Joost de Graaf, Christian Holm

Abstract: Most biological fluids are viscoelastic, meaning that they have elastic properties in addition to the dissipative properties found in Newtonian fluids. Computational models can help us understand viscoelastic flow, but are often limited in how they deal with complex flow geometries and suspended particles. Here, we present a lattice Boltzmann solver for Oldroyd-B fluids that can handle arbitrarily… ▽ More Most biological fluids are viscoelastic, meaning that they have elastic properties in addition to the dissipative properties found in Newtonian fluids. Computational models can help us understand viscoelastic flow, but are often limited in how they deal with complex flow geometries and suspended particles. Here, we present a lattice Boltzmann solver for Oldroyd-B fluids that can handle arbitrarily-shaped fixed and moving boundary conditions, which makes it ideally suited for the simulation of confined colloidal suspensions. We validate our method using several standard rheological setups, and additionally study a single sedimenting colloid, also finding good agreement with literature. Our approach can readily be extended to constitutive equations other than Oldroyd-B. This flexibility and the handling of complex boundaries holds promise for the study of microswimmers in viscoelastic fluids. △ Less

Submitted 23 November, 2020; v1 submitted 25 September, 2020; originally announced September 2020.

Comments: 13 pages, 11 figures

Diffusion-based height analysis reveals robust microswimmer-wall separation

Authors: Stefania Ketzetzi, Joost de Graaf, Daniela J. Kraft

Abstract: Microswimmers typically move near walls, which can strongly influence their motion. However, direct experimental measurements of swimmer-wall separation remain elusive to date. Here, we determine this separation for model catalytic microswimmers from the height dependence of the passive component of their mean-squared displacement. We find that swimmers exhibit "ypsotaxis", a tendency to assume a… ▽ More Microswimmers typically move near walls, which can strongly influence their motion. However, direct experimental measurements of swimmer-wall separation remain elusive to date. Here, we determine this separation for model catalytic microswimmers from the height dependence of the passive component of their mean-squared displacement. We find that swimmers exhibit "ypsotaxis", a tendency to assume a fixed height above the wall for a range of salt concentrations, swimmer surface charges, and swimmer sizes. Our findings indicate that ypsotaxis is activity-induced, posing restrictions on future modeling of their still debated propulsion mechanism. △ Less

Submitted 22 October, 2020; v1 submitted 11 June, 2020; originally announced June 2020.

Voluntary phantom hand and finger movements in transhumeral amputees could be used to naturally control polydigital prostheses

Authors: Nathanael Jarrasse, Caroline Nicol, Florian Richer, Amelie Touillet, Noël Martinet, Jean Paysant, Jozina de Graaf

Abstract: An arm amputation is extremely invalidating since many of our daily tasks require bi-manual and precise control of hand movements. Perfect hand prostheses should therefore offer a natural, intuitive and cognitively simple control over their numerous biomimetic active degrees of freedom. While efficient polydigital prostheses are commercially available, their control remains complex to master and o… ▽ More An arm amputation is extremely invalidating since many of our daily tasks require bi-manual and precise control of hand movements. Perfect hand prostheses should therefore offer a natural, intuitive and cognitively simple control over their numerous biomimetic active degrees of freedom. While efficient polydigital prostheses are commercially available, their control remains complex to master and offers limited possibilities, especially for high amputation levels. In this pilot study, we demonstrate the possibility for upper-arm amputees to intuitively control a polydigital hand prosthesis by using surface myoelectric activities of residual limb muscles (sEMG) associated with phantom limb movements, even if these residual arm muscles on which the phantom activity is measured were not naturally associated with hand movements before amputation. Using pattern recognition methods, three arm amputees were able, without training, to initiate 5-8 movements of a robotic hand (including individual finger movements) by simply mobilizing their phantom limb while the robotic hand was mimicking the action in real time. This innovative control approach could offer to numerous upper-limb amputees an access to recent biomimetic prostheses with multiple controllable joints, without requiring surgery or complex training; and might deeply change the way the phantom limb is apprehended by both patients and clinicians. △ Less

Submitted 26 April, 2019; originally announced April 2019.

Journal ref: 2017 International Conference on Rehabilitation Robotics (ICORR), Jul 2017, London, France. pp.1239-1245

Hydrodynamic Mobility Reversal of Squirmers near Flat and Curved Surfaces

Authors: Michael Kuron, Philipp Stärk, Christian Holm, Joost de Graaf

Abstract: Self-propelled particles have been experimentally shown to orbit spherical obstacles and move along surfaces. Here, we theoretically and numerically investigate this behavior for a hydrodynamic squirmer interacting with spherical objects and flat walls using three different methods of approximately solving the Stokes equations: The method of reflections, which is accurate in the far field; lubrica… ▽ More Self-propelled particles have been experimentally shown to orbit spherical obstacles and move along surfaces. Here, we theoretically and numerically investigate this behavior for a hydrodynamic squirmer interacting with spherical objects and flat walls using three different methods of approximately solving the Stokes equations: The method of reflections, which is accurate in the far field; lubrication theory, which describes the close-to-contact behavior; and a lattice Boltzmann solver that accurately accounts for near-field flows. The method of reflections predicts three distinct behaviors: orbiting/sliding, scattering, and hovering, with orbiting being favored for lower curvature as in the literature. Surprisingly, it also shows backward orbiting/sliding for sufficiently strong pushers, caused by fluid recirculation in the gap between the squirmer and the obstacle leading to strong forces opposing forward motion. Lubrication theory instead suggests that only hovering is a stable point for the dynamics. We therefore employ lattice Boltzmann to resolve this discrepancy and we qualitatively reproduce the richer far-field predictions. Our results thus provide insight into a possible mechanism of mobility reversal mediated solely through hydrodynamic interactions with a surface. △ Less

Submitted 3 July, 2019; v1 submitted 4 April, 2019; originally announced April 2019.

Comments: 13 pages, 12 figures

A Lattice Boltzmann Model for Squirmers

Authors: Michael Kuron, Philipp Stärk, Christian Burkard, Joost de Graaf, Christian Holm

Abstract: The squirmer is a simple yet instructive model for microswimmers, which employs an effective slip velocity on the surface of a spherical swimmer to describe its self-propulsion. We solve the hydrodynamic flow problem with the lattice Boltzmann (LB) method, which is well-suited for time-dependent problems involving complex boundary conditions. Incorporating the squirmer into LB is relatively straig… ▽ More The squirmer is a simple yet instructive model for microswimmers, which employs an effective slip velocity on the surface of a spherical swimmer to describe its self-propulsion. We solve the hydrodynamic flow problem with the lattice Boltzmann (LB) method, which is well-suited for time-dependent problems involving complex boundary conditions. Incorporating the squirmer into LB is relatively straight-forward, but requires an unexpectedly fine grid resolution to capture the physical flow fields and behaviors accurately. We demonstrate this using four basic hydrodynamic tests: Two for the far-field flow---accuracy of the hydrodynamic moments and squirmer-squirmer interactions---and two that require the near field to be accurately resolved---a squirmer confined to a tube and one scattering off a spherical obstacle---which LB is capable of doing down to the grid resolution. We find good agreement with (numerical) results obtained using other hydrodynamic solvers in the same geometries and identify a minimum required resolution to achieve this reproduction. We discuss our algorithm in the context of other hydrodynamic solvers and present an outlook on its application to multi-squirmer problems. △ Less

Submitted 31 March, 2019; v1 submitted 12 March, 2019; originally announced March 2019.

Comments: 9 pages, 7 figures

Journal ref: J. Chem. Phys. 150, 144110 (2019)

Slip length dependent propulsion speed of catalytic colloidal swimmers near walls

Authors: Stefania Ketzetzi, Joost de Graaf, Rachel P. Doherty, Daniela J. Kraft

Abstract: Catalytic colloidal swimmers that propel due to self-generated fluid flows exhibit strong affinity for surfaces. We here report experimental measurements of significantly different velocities of such microswimmers in the vicinity of substrates made from different materials. We find that velocities scale with the solution contact angle $θ$ on the substrate, which in turn relates to the associated h… ▽ More Catalytic colloidal swimmers that propel due to self-generated fluid flows exhibit strong affinity for surfaces. We here report experimental measurements of significantly different velocities of such microswimmers in the vicinity of substrates made from different materials. We find that velocities scale with the solution contact angle $θ$ on the substrate, which in turn relates to the associated hydrodynamic substrate slip length, as $V\propto(\cosθ+1)^{-3/2}$. We show that such dependence can be attributed to osmotic coupling between swimmers and substrate. Our work points out that hydrodynamic slip at the wall, though often unconsidered, can significantly impact the self-propulsion of catalytic swimmers. △ Less

Submitted 9 September, 2019; v1 submitted 20 December, 2018; originally announced December 2018.

Journal ref: Phys. Rev. Lett. 124, 048002 (2020)

Sedimentation of a rigid helix in viscous media

Authors: Martina Palusa, Joost de Graaf, Aidan Brown, Alexander Morozov

Abstract: We consider sedimentation of a rigid helical filament in a viscous fluid under gravity. In the Stokes limit, the drag forces and torques on the filament are approximated within the resistive-force theory. We develop an analytic approximation to the exact equations of motion that works well in the limit of a sufficiently large number of turns in the helix (larger than two, typically). For a wide ra… ▽ More We consider sedimentation of a rigid helical filament in a viscous fluid under gravity. In the Stokes limit, the drag forces and torques on the filament are approximated within the resistive-force theory. We develop an analytic approximation to the exact equations of motion that works well in the limit of a sufficiently large number of turns in the helix (larger than two, typically). For a wide range of initial conditions, our approximation predicts that the centre of the helix itself follows a helical path with the symmetry axis of the trajectory being parallel to the direction of gravity. The radius and the pitch of the trajectory scale as non-trivial powers of the number of turns in the original helix. For the initial conditions corresponding to an almost horizontal orientation of the helix, we predict trajectories that are either attracted towards the horizontal orientation, in which case the helix sediments in a straight line along the direction of gravity, or trajectories that form a helical-like path with many temporal frequencies involved. Our results provide new insight into the sedimentation of chiral objects and might be used to develop new techniques for their spatial separation. △ Less

Submitted 20 November, 2018; originally announced November 2018.

Comments: 25 pages, 10 figures; accepted for publication in Physical Review Fluids

ESPResSo 4.0 -- An Extensible Software Package for Simulating Soft Matter Systems

Authors: Florian Weik, Rudolf Weeber, Kai Szuttor, Konrad Breitsprecher, Joost de Graaf, Michael Kuron, Jonas Landsgesell, Henri Menke, David Sean, Christian Holm

Abstract: ESPResSo 4.0 is an extensible simulation package for research on soft matter. This versatile molecular dynamics program was originally developed for coarse-grained simulations of charged systems Limbach et al., Comput. Phys. Commun. 174, 704 (2006). The scope of the software has since broadened considerably: ESPResSo can now be used to simulate systems with length scales spanning from the molecula… ▽ More ESPResSo 4.0 is an extensible simulation package for research on soft matter. This versatile molecular dynamics program was originally developed for coarse-grained simulations of charged systems Limbach et al., Comput. Phys. Commun. 174, 704 (2006). The scope of the software has since broadened considerably: ESPResSo can now be used to simulate systems with length scales spanning from the molecular to the colloidal. Examples include, self-propelled particles in active matter, membranes in biological systems, and the aggregation of soot particles in process engineering. ESPResSo also includes solvers for hydrodynamic and electrokinetic problems, both on the continuum and on the explicit particle level. Since our last description of version 3.1 Arnold et al., Meshfree Methods for Partial Differential Equations VI, Lect. Notes Comput. Sci. Eng. 89, 1 (2013), the software has undergone considerable restructuring. The biggest change is the replacement of the Tcl scripting interface with a much more powerful Python interface. In addition, many new simulation methods have been implemented. In this article, we highlight the changes and improvements made to the interface and code, as well as the new simulation techniques that enable a user of ESPResSo 4.0 to simulate physics that is at the forefront of soft matter research. △ Less

Submitted 19 November, 2018; originally announced November 2018.

Self-Thermoelectrophoresis at Low Salinity

Authors: Joost de Graaf, Sela Samin

Abstract: A locally heated Janus colloid can achieve motion in a fluid through the coupling of dissolved ions and the medium's polarizibility to an imposed temperature gradient, an effect known as self-thermo(di)electrophoresis. We numerically study the self-propulsion of such a "hot swimmer" in a monovalent electrolyte solution using the finite-element method. The effect of electrostatic screening for inte… ▽ More A locally heated Janus colloid can achieve motion in a fluid through the coupling of dissolved ions and the medium's polarizibility to an imposed temperature gradient, an effect known as self-thermo(di)electrophoresis. We numerically study the self-propulsion of such a "hot swimmer" in a monovalent electrolyte solution using the finite-element method. The effect of electrostatic screening for intermediate and large Debye lengths is charted and we report on the fluid flow generated by self-thermoelectrophoresis. We obtain excellent agreement between our analytic theory and numerical calculations in the limit of high salinity, validating our approach. At low salt concentrations, we consider two analytic approaches and use Teubner's integral formalism to arrive at expressions for the speed. These expressions agree semi-quantitatively with our numerical results for conducting swimmers, providing further validation. Our numerical approach provides a solid framework against the strengths and weaknesses of analytic theory can be appreciated and which should benefit the realization and analysis of further experiments on hot swimming. △ Less

Submitted 1 May, 2019; v1 submitted 14 November, 2018; originally announced November 2018.

Comments: 15 pages, 6 figures

Hydrodynamics strongly affect the dynamics of colloidal gelation but not gel structure

Authors: Joost de Graaf, Wilson C. K. Poon, Magnus J. Haughey, Michiel Hermes

Abstract: Colloidal particles with strong, short-ranged attractions can form a gel. We simulate this process without and with hydrodynamic interactions (HI), using the lattice-Boltzmann method to account for presence of a thermalized solvent. We show that HI speed up and slow down gelation at low and high volume fractions, respectively. The transition between these two regimes is linked to the existence of… ▽ More Colloidal particles with strong, short-ranged attractions can form a gel. We simulate this process without and with hydrodynamic interactions (HI), using the lattice-Boltzmann method to account for presence of a thermalized solvent. We show that HI speed up and slow down gelation at low and high volume fractions, respectively. The transition between these two regimes is linked to the existence of a percolating cluster shortly after quenching the system. However, when we compare gels at matched 'structural age', we find nearly indistinguishable structures with and without HI. Our result explains longstanding, unresolved conflicts in the literature. △ Less

Submitted 30 November, 2018; v1 submitted 5 August, 2018; originally announced August 2018.

Comments: 7 pages, 4 figures

Microfluidic Pumping by Micromolar Salt Concentrations

Authors: Ran Niu, Patrick Kreissl, Aidan T. Brown, Georg Rempfer, Denis Botin, Christian Holm, Thomas Palberg, Joost de Graaf

Abstract: An ion-exchange-resin-based microfluidic pump is introduced that utilizes trace amounts of ions to generate fluid flows. We show experimentally that our pump operates in almost deionized water for periods exceeding 24h and induces fluid flows of um/s over hundreds of um. This flow displays a far-field, power-law decay which is characteristic of two-dimensional (2D) flow when the system is strongly… ▽ More An ion-exchange-resin-based microfluidic pump is introduced that utilizes trace amounts of ions to generate fluid flows. We show experimentally that our pump operates in almost deionized water for periods exceeding 24h and induces fluid flows of um/s over hundreds of um. This flow displays a far-field, power-law decay which is characteristic of two-dimensional (2D) flow when the system is strongly confined and of three-dimensional (3D) flow when it is not. Using theory and numerical calculations we demonstrate that our observations are consistent with electroosmotic pumping driven by umol/L ion concentrations in the sample cell that serve as 'fuel' to the pump. Our study thus reveals that trace amounts of charge carriers can produce surprisingly strong fluid flows; an insight that should benefit the design of a new class of microfluidic pumps that operate at very low fuel concentrations. △ Less

Submitted 19 January, 2017; v1 submitted 2 October, 2016; originally announced October 2016.

Comments: 15 pages, 10 figures, 1 table

Quantum key distribution by phase flipping of coherent states of light

Authors: G. A. Barbosa, J. van de Graaf, P. Mateus, N. Paunković

Abstract: In this paper we present quantum key distribution protocol that, instead of single qubits, uses mesoscopic coherent states of light $|α\rangle$ to encode bit values of a randomly generated key. Given the reference value $α\in\mathbb C$, and a string of phase rotations each randomly taken from a set of $2M$ equidistant phases, Alice prepares a quantum state given by a product of coherent states of… ▽ More In this paper we present quantum key distribution protocol that, instead of single qubits, uses mesoscopic coherent states of light $|α\rangle$ to encode bit values of a randomly generated key. Given the reference value $α\in\mathbb C$, and a string of phase rotations each randomly taken from a set of $2M$ equidistant phases, Alice prepares a quantum state given by a product of coherent states of light, such that a complex phase of each pulse is rotated by the corresponding phase rotation. The encoding of $i$-th bit of the key $r=r_1 \dots r_\ell$ is done by further performing phase rotation $r_i π$ (with $r_i = 0,1$) on the $i$-th coherent state pulse. In order to protect the protocol against the man-in-the-middle attack, we introduce a verification procedure, and analyse the protocol's security using the Holevo bound. We also analyse the possibility of beam splitting-like and of collective attacks, showing the impossibility of the former and, in the case of our protocol, the inadequacy of the latter. While we cannot prove full perfect security against the most general attacks allowed by the laws of quantum mechanics, our protocol achieves faster quantum key distribution, over larger distances and with lower costs, than the single-photon counterparts, maintaining at least practical security against the current and the near future technologies. △ Less

Submitted 3 May, 2017; v1 submitted 22 September, 2016; originally announced September 2016.

Comments: 8 pages, 2 figures

Lattice-Boltzmann Simulations of Microswimmer-Tracer Interactions

Authors: Joost de Graaf, Joakim Stenhammar

Abstract: Hydrodynamic interactions in systems comprised of self-propelled particles, such as swimming microorganisms, and passive tracers have a significant impact on the tracer dynamics compared to the equivalent "dry" sample. However, such interactions are often difficult to take into account in simulations due to their computational cost. Here, we perform a systematic investigation of swimmer-tracer int… ▽ More Hydrodynamic interactions in systems comprised of self-propelled particles, such as swimming microorganisms, and passive tracers have a significant impact on the tracer dynamics compared to the equivalent "dry" sample. However, such interactions are often difficult to take into account in simulations due to their computational cost. Here, we perform a systematic investigation of swimmer-tracer interaction using an efficient force/counter-force based lattice-Boltzmann (LB) algorithm [J. de Graaf~\textit{et al.}, J. Chem. Phys.~\textbf{144}, 134106 (2016)] in order to validate its ability to capture the relevant low-Reynolds-number physics. We show that the LB algorithm reproduces far-field theoretical results well, both in a system with periodic boundary conditions and in a spherical cavity with no-slip walls, for which we derive expressions here. The force-lattice coupling of the LB algorithm leads to a "smearing out" of the flow field, which strongly perturbs the tracer trajectories at close swimmer-tracer separations, and we analyze how this effect can be accurately captured using a simple renormalized hydrodynamic theory. Finally, we show that care must be taken when using LB algorithms to simulate systems of self-propelled particles, since its finite momentum transport time can lead to significant deviations from theoretical predictions based on Stokes flow. These insights should prove relevant to the future study of large-scale microswimmer suspensions using these methods. △ Less

Submitted 16 May, 2017; v1 submitted 29 July, 2016; originally announced July 2016.

Journal ref: Phys. Rev. E 95, 023302 (2017)

Moving Charged Particles in Lattice Boltzmann-Based Electrokinetics

Authors: Michael Kuron, Georg Rempfer, Florian Schornbaum, Martin Bauer, Christian Godenschwager, Christian Holm, Joost de Graaf

Abstract: The motion of ionic solutes and charged particles under the influence of an electric field and the ensuing hydrodynamic flow of the underlying solvent is ubiquitous in aqueous colloidal suspensions. The physics of such systems is described by a coupled set of differential equations, along with boundary conditions, collectively referred to as the electrokinetic equations. Capuani et al. [J. Chem. P… ▽ More The motion of ionic solutes and charged particles under the influence of an electric field and the ensuing hydrodynamic flow of the underlying solvent is ubiquitous in aqueous colloidal suspensions. The physics of such systems is described by a coupled set of differential equations, along with boundary conditions, collectively referred to as the electrokinetic equations. Capuani et al. [J. Chem. Phys. 121, 973 (2004)] introduced a lattice-based method for solving this system of equations, which builds upon the lattice Boltzmann algorithm for the simulation of hydrodynamic flow and exploits computational locality. However, thus far, a description of how to incorporate moving boundary conditions into the Capuani scheme has been lacking. Moving boundary conditions are needed to simulate multiple arbitrarily-moving colloids. In this paper, we detail how to introduce such a particle coupling scheme, based on an analogue to the moving boundary method for the pure LB solver. The key ingredients in our method are mass and charge conservation for the solute species and a partial-volume smoothing of the solute fluxes to minimize discretization artifacts. We demonstrate our algorithm's effectiveness by simulating the electrophoresis of charged spheres in an external field; for a single sphere we compare to the equivalent electro-osmotic (co-moving) problem. Our method's efficiency and ease of implementation should prove beneficial to future simulations of the dynamics in a wide range of complex nanoscopic and colloidal systems that was previously inaccessible to lattice-based continuum algorithms. △ Less

Submitted 22 November, 2016; v1 submitted 15 July, 2016; originally announced July 2016.

Journal ref: J. Chem. Phys. 145, 214102 (2016)

Nanoparticle Translocation through Conical Nanopores: A Finite Element Study of Electrokinetic Transport

Authors: Georg Rempfer, Sascha Ehrhardt, Christian Holm, Joost de Graaf

Abstract: Recent years have seen a surge of interest in nanopores because such structures show a strong potential for characterizing nanoparticles, proteins, DNA, and even single molecules. These systems have been extensively studied in experiment as well as by all-atom and coarse-grained simulations, with a strong focus on DNA translocation. However, the equally interesting problem of particle characteriza… ▽ More Recent years have seen a surge of interest in nanopores because such structures show a strong potential for characterizing nanoparticles, proteins, DNA, and even single molecules. These systems have been extensively studied in experiment as well as by all-atom and coarse-grained simulations, with a strong focus on DNA translocation. However, the equally interesting problem of particle characterization using nanopores has received far less attention. Here, we theoretically investigate the translocation of a nanoparticle through a conical nanocapillary. We use a model based on numerically solving the coupled system of electrokinetic continuum equations, which we introduce in detail. Based on our findings, we formulate basic guidelines for obtaining the maximum current signal during the translocation event, which should be transferable to other nanopore geometries. In addition, the dependence of the signal strength on particle properties, such as surface charge and size, is evaluated. Finally, we identify conditions under which the translocation is prevented by the formation of a strong electro-osmotic barrier and show that the particle may even become trapped at the pore orifice, without imposing an external hydrostatic pressure difference. △ Less

Submitted 21 June, 2016; originally announced June 2016.

Comments: 13 pages, 7 figures

Clustering of Self-Propelled Triangles with Surface Roughness

Authors: Sven Erik Ilse, Christian Holm, Joost de Graaf

Abstract: Self-propelled particles can spontaneously form dense phases from a dilute suspension in a process referred to as motility-induced phase separation. The properties of the out-of-equilibrium structures that are formed are governed by the specifics of the particle interactions and the strength of the activity. Thus far, most studies into the formation of these structures have focused on spherical co… ▽ More Self-propelled particles can spontaneously form dense phases from a dilute suspension in a process referred to as motility-induced phase separation. The properties of the out-of-equilibrium structures that are formed are governed by the specifics of the particle interactions and the strength of the activity. Thus far, most studies into the formation of these structures have focused on spherical colloids, dumbbells, and rod-like particles endowed with various interaction potentials. Only a few studies have examined the collective behavior of more complex particle shapes. Here, we increase the geometric complexity and use Molecular Dynamics simulations to consider the structures formed by triangular self-propelled particles with surface roughness. These triangles either move towards their apex or towards their base, i.e., they possess a polarity. We find that apex-directed triangles cluster more readily, more stably, and have a smoother cluster interface than their base-directed counterparts. A difference between the two polarities is in line with the results of [H.H. Wensink, et al., Phys. Rev. E 89, 010302(R) (2014)], however, we obtain the reversed result when it comes to clustering, namely that apex-directed particles cluster more readily. We further show that reducing the surface roughness negatively impacts the stability of the base-directed structures, suggesting that their formation is in large part due to surface roughness. Our results lay a solid foundation for future experimental and computational studies into the effect of roughness on the collective dynamics of swimmers. △ Less

Submitted 7 September, 2016; v1 submitted 1 June, 2016; originally announced June 2016.

Comments: 15 pages, 10 figures

Stirring by Periodic Arrays of Microswimmers

Authors: Joost de Graaf, Joakim Stenhammar

Abstract: The interaction between swimming microorganisms or artificial self-propelled colloids and passive (tracer) particles in a fluid leads to enhanced diffusion of the tracers. This enhancement has attracted strong interest, as it could lead to new strategies to tackle the difficult problem of mixing on a microfluidic scale. Most of the theoretical work on this topic has focused on hydrodynamic interac… ▽ More The interaction between swimming microorganisms or artificial self-propelled colloids and passive (tracer) particles in a fluid leads to enhanced diffusion of the tracers. This enhancement has attracted strong interest, as it could lead to new strategies to tackle the difficult problem of mixing on a microfluidic scale. Most of the theoretical work on this topic has focused on hydrodynamic interactions between the tracers and swimmers in a bulk fluid. However, in simulations, periodic boundary conditions (PBCs) are often imposed on the sample and the fluid. Here, we theoretically analyze the effect of PBCs on the hydrodynamic interactions between tracer particles and microswimmers. We formulate an Ewald sum for the leading-order stresslet singularity produced by a swimmer to probe the effect of PBCs on tracer trajectories. We find that introducing periodicity into the system has a surprisingly significant effect, even for relatively small swimmer-tracer separations. We also find that the bulk limit is only reached for very large system sizes, which are challenging to simulate with most hydrodynamic solvers. △ Less

Submitted 3 July, 2017; v1 submitted 1 June, 2016; originally announced June 2016.

Comments: 11 pages, 4 figures

Journal ref: J. Fluid Mech. 811, 487-498 (2017)

Selective Trapping of DNA using Glass Microcapillaries

Authors: Georg Rempfer, Sascha Ehrhardt, Nadanai Laohakunakorn, Gary B. Davies, Ulrich F. Keyser, Christian Holm, Joost de Graaf

Abstract: We show experimentally that a cheap glass microcapillary can accumulate λ-phage DNA at its tip and deliver the DNA into the capillary using a combination of electro-osmotic flow, pressure-driven flow, and electrophoresis. We develop an efficient simulation model for this phenomenon based on the electrokinetic equations and the finite-element method. Using our model, we explore the large parameter… ▽ More We show experimentally that a cheap glass microcapillary can accumulate λ-phage DNA at its tip and deliver the DNA into the capillary using a combination of electro-osmotic flow, pressure-driven flow, and electrophoresis. We develop an efficient simulation model for this phenomenon based on the electrokinetic equations and the finite-element method. Using our model, we explore the large parameter space of the trapping mechanism by varying the salt concentration, the capillary surface charge, the applied voltage, the pressure difference, and the mobility of the analyte molecules. Our simulation results show that this system can be tuned to capture a wide range of analyte molecules, such as DNA or proteins, based on their electrophoretic mobility. Our method for separation and pre-concentration of analytes has implications for the development of low-cost lab-on-a-chip devices. △ Less

Submitted 31 May, 2016; originally announced May 2016.

Comments: 9 pages, 4 figures

Understanding the Onset of Oscillatory Swimming in Microchannels

Authors: Joost de Graaf, Arnold J. T. M. Mathijssen, Marc Fabritius, Henri Menke, Christian Holm, Tyler N. Shendruk

Abstract: Self-propelled colloids (swimmers) in confining geometries follow trajectories determined by hydrodynamic interactions with the bounding surfaces. However, typically these interactions are ignored or truncated to lowest order. We demonstrate that higher-order hydrodynamic moments cause rod-like swimmers to follow oscillatory trajectories in quiescent fluid between two parallel plates, using a comb… ▽ More Self-propelled colloids (swimmers) in confining geometries follow trajectories determined by hydrodynamic interactions with the bounding surfaces. However, typically these interactions are ignored or truncated to lowest order. We demonstrate that higher-order hydrodynamic moments cause rod-like swimmers to follow oscillatory trajectories in quiescent fluid between two parallel plates, using a combination of lattice-Boltzmann simulations and far-field calculations. This behavior occurs even far from the confining walls and does not require lubrication results. We show that a swimmer's hydrodynamic quadrupole moment is crucial to the onset of the oscillatory trajectories. This insight allows us to develop a simple model for the dynamics near the channel center based on these higher hydrodynamic moments, and suggests opportunities for trajectory-based experimental characterization of swimmers' hydrodynamic properties. △ Less

Submitted 3 May, 2016; originally announced May 2016.

Comments: 12 pages, 9 figures, 2 tables

Journal ref: Soft Matter, 2016, 12, 4704-4708

Limiting Spurious Flow in Simulations of Electrokinetic Phenomena

Authors: Georg Rempfer, Gary B. Davies, Christian Holm, Joost de Graaf

Abstract: Electrokinetic transport phenomena can strongly influence the behaviour of macromolecules and colloidal particles in solution, with applications in, e.g., DNA translocation through nanopores, electro-osmotic flow in nanocapillaries, and electrophoresis of charged macromolecules. Numerical simulations are an important tool to investigate these electrokinetic phenomena, but are often plagued by spur… ▽ More Electrokinetic transport phenomena can strongly influence the behaviour of macromolecules and colloidal particles in solution, with applications in, e.g., DNA translocation through nanopores, electro-osmotic flow in nanocapillaries, and electrophoresis of charged macromolecules. Numerical simulations are an important tool to investigate these electrokinetic phenomena, but are often plagued by spurious fluxes and spurious flows that can easily exceed physical fluxes and flows. Here, we present a method that reduces one of these spurious currents, spurious flow, by several orders of magnitude. We demonstrate the effectiveness and generality of our method for both electrokinetic lattice-Boltzmann and finite-element-method based algorithms by simulating a charged sphere in an electrolyte solution, and flow through a nanopore. We also show that previous attempts to suppress these spurious currents introduce other sources of error. △ Less

Submitted 7 April, 2016; originally announced April 2016.

Comments: 13 pages, 7 figures

The Efficiency of Self-Phoretic Propulsion Mechanisms with Surface Reaction Heterogeneity

Authors: Patrick Kreissl, Christian Holm, Joost de Graaf

Abstract: We consider the efficiency of self-phoretic colloidal particles (swimmers) as a function of the heterogeneity in the surface reaction rate. The set of fluid, species, and electrostatic continuity equations is solved analytically using a linearization and numerically using a finite-element method. To compare spherical swimmers of different size and with heterogeneous catalytic conversion rates, a '… ▽ More We consider the efficiency of self-phoretic colloidal particles (swimmers) as a function of the heterogeneity in the surface reaction rate. The set of fluid, species, and electrostatic continuity equations is solved analytically using a linearization and numerically using a finite-element method. To compare spherical swimmers of different size and with heterogeneous catalytic conversion rates, a 'swimmer efficiency' functional $η$ is introduced. It is proven, that in order to obtain maximum swimmer efficiency the reactivity has to be localized at the pole(s). Our results also shed light on the sensitivity of the propulsion speed to details of the surface reactivity, a property that is notoriously hard to measure. This insight can be utilized in the design of new self-phoretic swimmers. △ Less

Submitted 25 February, 2016; originally announced February 2016.

Comments: 10 pages, 4 figures

Lattice-Boltzmann Hydrodynamics of Anisotropic Active Matter

Authors: Joost de Graaf, Henri Menke, Arnold J. T. M. Mathijssen, Marc Fabritius, Christian Holm, Tyler N. Shendruk

Abstract: A plethora of active matter models exist that describe the behavior of self-propelled particles (or swimmers), both with and without hydrodynamics. However, there are few studies that consider shape-anisotropic swimmers and include hydrodynamic interactions. Here, we introduce a simple method to simulate self-propelled colloids interacting hydrodynamically in a viscous medium using the lattice-Bol… ▽ More A plethora of active matter models exist that describe the behavior of self-propelled particles (or swimmers), both with and without hydrodynamics. However, there are few studies that consider shape-anisotropic swimmers and include hydrodynamic interactions. Here, we introduce a simple method to simulate self-propelled colloids interacting hydrodynamically in a viscous medium using the lattice-Boltzmann technique. Our model is based on raspberry-type viscous coupling and a force/counter-force formalism which ensures that the system is force free. We consider several anisotropic shapes and characterize their hydrodynamic multipolar flow field. We demonstrate that shape-anisotropy can lead to the presence of a strong quadrupole and octupole moments, in addition to the principle dipole moment. The ability to simulate and characterize these higher-order moments will prove crucial for understanding the behavior of model swimmers in confining geometries. △ Less

Submitted 24 February, 2016; originally announced February 2016.

Comments: 11 pages, 3 figures, 3 tables

Ionic Screening and Dissociation are Crucial for Understanding Chemical Self-Propulsion in Water

Authors: Aidan T. Brown, Wilson C. K. Poon, Christian Holm, Joost de Graaf

Abstract: Water is a polar solvent and hence supports the bulk dissociation of itself and its solutes into ions, and the re-association of these ions into neutral molecules in a dynamic equilibrium, e.g., ${\rm H_2O_2}\leftrightharpoons {\rm H^+~+~HO_2^-}$. Using continuum theory, we study the influence of these reactions on the self-propulsion of colloids driven by surface chemical reactions (chemical swim… ▽ More Water is a polar solvent and hence supports the bulk dissociation of itself and its solutes into ions, and the re-association of these ions into neutral molecules in a dynamic equilibrium, e.g., ${\rm H_2O_2}\leftrightharpoons {\rm H^+~+~HO_2^-}$. Using continuum theory, we study the influence of these reactions on the self-propulsion of colloids driven by surface chemical reactions (chemical swimmers) in aqueous solution. The association-dissociation reactions are here shown to have a strong influence on the swimmers' behaviour, and must therefore be included in future modelling. In particular, such bulk reactions permit charged swimmers to propel electrophoretically even if all species involved in the surface reactions are neutral. The bulk reactions also significantly modify the predicted speed of chemical swimmers propelled by ionic currents, by up to an order of magnitude. For swimmers whose surface reactions produce both anions and cations (ionic self-diffusiophoresis), the bulk reactions produce an additional reactive screening length, analogous to the Debye length in electrostatics. This in turn leads to an inverse relationship between swimmer radius and swimming speed, which could provide an alternative explanation for recent experimental observations on Pt-polystyrene Janus swimmers [S. Ebbens et al., Phys. Rev. E 85, 020401 (2012)]. We also use our continuum theory to investigate the effect of the Debye screening length itself, going beyond the infinitely thin limit approximation used by previous analytical theories. We identify significant departures from this limiting behavior for micron-sized swimmers under typical experimental conditions, and find that the limiting behavior fails entirely for nanoscale swimmers. △ Less

Submitted 16 August, 2016; v1 submitted 6 December, 2015; originally announced December 2015.

Comments: 25 pages, 12 figures

The Raspberry Model for Hydrodynamic Interactions Revisited. II. The Effect of Confinement

Authors: Joost de Graaf, Toni Peter, Lukas P. Fischer, Christian Holm

Abstract: The so-called 'raspberry' model refers to the hybrid lattice-Boltzmann (LB) and Langevin molecular dynamics scheme for simulating the dynamics of suspensions of colloidal particles, originally developed by [V. Lobaskin and B. Dünweg, New J. Phys. 6, 54 (2004)], wherein discrete surface points are used to achieve fluid-particle coupling. In this paper, we present a follow up to our study of the eff… ▽ More The so-called 'raspberry' model refers to the hybrid lattice-Boltzmann (LB) and Langevin molecular dynamics scheme for simulating the dynamics of suspensions of colloidal particles, originally developed by [V. Lobaskin and B. Dünweg, New J. Phys. 6, 54 (2004)], wherein discrete surface points are used to achieve fluid-particle coupling. In this paper, we present a follow up to our study of the effectiveness of the raspberry model in reproducing hydrodynamic interactions in the Stokes regime for spheres arranged in a simple-cubic crystal [L. Fischer, et al., J. Chem. Phys. 143, 084108 (2015)]. Here, we consider the accuracy with which the raspberry model is able to reproduce such interactions for particles confined between two parallel plates. To this end, we compare our LB simulation results to established theoretical expressions and finite-element calculations. We show that there is a discrepancy between the translational and rotational mobility when only surface coupling points are used, as also found in Part I of our joint publication. We demonstrate that adding internal coupling points to the raspberry, can be used to correct said discrepancy in confining geometries as well. Finally, we show that the raspberry model accurately reproduces hydrodynamic interactions between a spherical colloid and planar walls up to roughly one LB lattice spacing. △ Less

Submitted 5 July, 2016; v1 submitted 9 March, 2015; originally announced March 2015.

Comments: 13 pages, 8 figures

The Raspberry Model for Hydrodynamic Interactions Revisited. I. Periodic Arrays of Spheres and Dumbbells

Authors: Lukas P. Fischer, Toni Peter, Christian Holm, Joost de Graaf

Abstract: The so-called 'raspberry' model refers to the hybrid lattice-Boltzmann and Langevin molecular dynamics scheme for simulating the dynamics of suspensions of colloidal particles, originally developed by [V. Lobaskin and B. Dünweg, New J. Phys. 6, 54 (2004)], wherein discrete surface points are used to achieve fluid-particle coupling. This technique has been used in many simulation studies on the beh… ▽ More The so-called 'raspberry' model refers to the hybrid lattice-Boltzmann and Langevin molecular dynamics scheme for simulating the dynamics of suspensions of colloidal particles, originally developed by [V. Lobaskin and B. Dünweg, New J. Phys. 6, 54 (2004)], wherein discrete surface points are used to achieve fluid-particle coupling. This technique has been used in many simulation studies on the behavior of colloids. However, there are fundamental questions with regards to the use of this model. In this paper, we examine the accuracy with which the raspberry method is able to reproduce Stokes-level hydrodynamic interactions when compared to analytic expressions for solid spheres in simple-cubic crystals. To this end, we consider the quality of numerical experiments that are traditionally used to establish these properties and we discuss their shortcomings. We show that there is a discrepancy between the translational and rotational mobility reproduced by the simple raspberry model and present a way to numerically remedy the problem by adding internal coupling points. Finally, we examine a non-convex shape, namely a colloidal dumbbell, and show that the filled raspberry model replicates the desired hydrodynamic behavior in bulk for this more complicated shape. Our investigation is continued in [J. de Graaf, et al., J. Chem. Phys. 143, 084107 (2015)], wherein we consider the raspberry model in the confining geometry of two parallel plates. △ Less

Submitted 8 October, 2015; v1 submitted 9 March, 2015; originally announced March 2015.

Comments: 25 pages, 11 figures

Diffusiophoretic Self-Propulsion for Partially Catalytic Spherical Colloids

Authors: Joost de Graaf, Georg Rempfer, Christian Holm

Abstract: Colloidal spheres with a partial platinum surface coating perform auto-phoretic motion when suspended in hydrogen peroxide solution. We present a theoretical analysis of the self-propulsion velocity of these particles using a continuum multi-component, self-diffusiophoretic model. With this model as a basis, we show how the slip-layer approximation can be derived and in which limits it holds. Firs… ▽ More Colloidal spheres with a partial platinum surface coating perform auto-phoretic motion when suspended in hydrogen peroxide solution. We present a theoretical analysis of the self-propulsion velocity of these particles using a continuum multi-component, self-diffusiophoretic model. With this model as a basis, we show how the slip-layer approximation can be derived and in which limits it holds. First, we consider the differences between the full multi-component model and the slip-layer approximation. Then the slip model is used to demonstrate and explore the sensitive nature of the particle's velocity on the details of the molecule-surface interaction. We find a strong asymmetry in the dependence of the colloid's velocity as a function of the level of catalytic coating, when there is a different interaction between the solute and solvent molecules and the inert and catalytic part of the colloid, respectively. The direction of motion can even be reversed by varying the level of the catalytic coating. Finally, we investigate the robustness of these results with respect to variations in the reaction rate near the edge between the catalytic and inert parts of the particle. Our results are of significant interest to the interpretation of experimental results on the motion of self-propelled particles. △ Less

Submitted 11 February, 2015; v1 submitted 17 December, 2014; originally announced December 2014.

Comments: 20 pages, 8 figures