-
Experimental Data Confirm Carrier-Cascade Model for Solid-State Conductance across Proteins
Authors:
Eszter Papp,
Gabor Vattay,
Carlos Romero-Muniz,
Linda A. Zotti,
Jerry A. Fereiro,
Mordechai Sheves,
David Cahen
Abstract:
The finding that electronic conductance across ultra-thin protein films between metallic electrodes remains nearly constant from room temperature to just a few degrees Kelvin has posed a challenge. We show that a model based on a generalized Landauer formula explains the nearly constant conductance and predicts an Arrhenius-like dependence for low temperatures. A critical aspect of the model is th…
▽ More
The finding that electronic conductance across ultra-thin protein films between metallic electrodes remains nearly constant from room temperature to just a few degrees Kelvin has posed a challenge. We show that a model based on a generalized Landauer formula explains the nearly constant conductance and predicts an Arrhenius-like dependence for low temperatures. A critical aspect of the model is that the relevant activation energy for conductance is either the difference between the HOMO and HOMO-1 or the LUMO+1 and LUMO energies instead of the HOMO-LUMO gap of the proteins. Analysis of experimental data confirm the Arrhenius-like law and allows us to extract the activation energies. We then calculate the energy differences with advanced DFT methods for proteins used in the experiments. Our main result is that the experimental and theoretical activation energies for these three different proteins and three differently prepared solid-state junctions match nearly perfectly, implying the mechanism's validity.
△ Less
Submitted 25 July, 2024;
originally announced July 2024.
-
A group-theoretic approach to the origin of chirality-induced spin selectivity in non-magnetic molecular junctions
Authors:
W. Dednam,
M. A. García-Blázquez,
Linda A. Zotti,
E. B. Lombardi,
C. Sabater,
S. Pakdel,
J. J. Palacios
Abstract:
Spin-orbit coupling gives rise to a range of spin-charge interconversion phenomena in non-magnetic systems where certain spatial symmetries are reduced or absent. Chirality-induced spin selectivity (CISS), a term that generically refers to a spin-dependent electron transfer in non-magnetic chiral systems, is one such case, appearing in a variety of seemingly unrelated situations ranging from inorg…
▽ More
Spin-orbit coupling gives rise to a range of spin-charge interconversion phenomena in non-magnetic systems where certain spatial symmetries are reduced or absent. Chirality-induced spin selectivity (CISS), a term that generically refers to a spin-dependent electron transfer in non-magnetic chiral systems, is one such case, appearing in a variety of seemingly unrelated situations ranging from inorganic materials to molecular devices. In particular, the origin of CISS in molecular junctions is a matter of an intense current debate. Here we derive a set of geometrical conditions for this effect to appear, hinting at the fundamental role of symmetries beyond otherwise relevant quantitative issues. Our approach, which draws on the use of point-group symmetries within the scattering formalism for transport, shows that electrode symmetries are as important as those of the molecule when it comes to the emergence of a spin-polarization and, by extension, to the possible appearance of CISS. It turns out that standalone metallic nanocontacts can exhibit spin-polarization when relative rotations which reduce the symmetry are introduced. As a corollary, molecular junctions with $\textbf{achiral}$ molecules can also exhibit spin-polarization along the direction of transport, provided that the whole junction is chiral in a specific way. This formalism also allows the prediction of qualitative changes of the spin-polarization upon substitution of a chiral molecule in the junction with its enantiomeric partner. Quantum transport calculations based on density functional theory corroborate all of our predictions and provide further quantitative insight within the single-particle framework.
△ Less
Submitted 5 February, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
The Role of Oligomeric Gold-Thiolate Units in Single Molecule Junc-tions of Thiol-Anchored Molecules
Authors:
Edmund Leary,
Linda A. Zotti,
Delia Miguel,
Irene R. Márquez,
Lucía Palomino-Ruiz,
Juan Manuel Cuerva,
Gabino Rubio-Bollinger,
M. Teresa González,
Nicolás Agrait
Abstract:
Using the break junction (BJ) technique we show that Au(RS)2 units play a significant role in thiol-terminated molecular junctions formed on gold. We have studied a range of thiol-terminated compounds, either with the sulfur atoms in direct conjugation with a phenyl core, or bonded to saturated methylene groups. For all molecules we observe at least two distinct groups of conductance plateaus. By…
▽ More
Using the break junction (BJ) technique we show that Au(RS)2 units play a significant role in thiol-terminated molecular junctions formed on gold. We have studied a range of thiol-terminated compounds, either with the sulfur atoms in direct conjugation with a phenyl core, or bonded to saturated methylene groups. For all molecules we observe at least two distinct groups of conductance plateaus. By a careful analysis of the length behavior of these plateaus, comparing the behavior across the different cores and with methyl sulfide anchor groups, we demonstrate that the lower conductance groups correspond to the incorporation of Au(RS)2 oligomeric units at the contacts. These structural motifs are found on the surface of gold nanoparticles but they have not before been shown to exist in molecular-break junctions. The results, while exemplifying the complex nature of thiol chemistry on gold, moreover clarify the conductance of 1,4-benzenedithiol on gold. We show that true Au-S-Ph-S-Au junctions have a relatively narrow conductance distribution.
△ Less
Submitted 20 March, 2018;
originally announced March 2018.
-
A simple descriptor for energetics at fcc-bcc metal interfaces
Authors:
Linda A. Zotti,
Stefano Sanvito,
David D. O'Regan
Abstract:
We have developed a new and user-friendly interface energy calculation method that avoids problems deriving from numerical differences between bulk and slab calculations, such as the number of k points along the direction perpendicular to the interface. We have applied this to 36 bcc-fcc metal interfaces in the (100) orientation and found a clear dependence of the interface energy on the differenc…
▽ More
We have developed a new and user-friendly interface energy calculation method that avoids problems deriving from numerical differences between bulk and slab calculations, such as the number of k points along the direction perpendicular to the interface. We have applied this to 36 bcc-fcc metal interfaces in the (100) orientation and found a clear dependence of the interface energy on the difference between the work functions of the two metals, on the one hand, and the total number of d electrons on the other. Greater mechanical deformations were observed in fcc crystals than in their bcc counterparts. For each bcc metal, the interface energy was found to follow the position of its d band, whereas the same was not observed for fcc.
△ Less
Submitted 9 February, 2018; v1 submitted 8 February, 2018;
originally announced February 2018.
-
Platinum atomic contacts: from tunneling to contact
Authors:
Linda A. Zotti,
Rubén Pérez
Abstract:
We present a theoretical study of the electronic transport through Pt nanocontacts. We show that the analysis of the tunnelling regime requires a very careful treatment of the technical details. For instance, an insufficient size of the system can cause unphysical charge oscillations to arise along the transport direction; moreover, the use of an inappropriate basis set can deviate the distance de…
▽ More
We present a theoretical study of the electronic transport through Pt nanocontacts. We show that the analysis of the tunnelling regime requires a very careful treatment of the technical details. For instance, an insufficient size of the system can cause unphysical charge oscillations to arise along the transport direction; moreover, the use of an inappropriate basis set can deviate the distance dependence of the conductance from the expected exponential trend. While the conductance decay can be either corrected by employing ghost atoms or a large-cutoff-radius basis set, the same does not apply to the corrugation, for which only the second option is recommended. Interestingly, these details were not found to have a remarkable impact in the contact regime. These findings are important for theoretical studies of distance-dependent phenomena in scanning-probe and break-junction experiments.
△ Less
Submitted 29 March, 2017;
originally announced March 2017.
-
Single-molecule conductance of a chemically modified, π-extended tetrathiafulvalene and its charge-transfer complex with F4TCNQ
Authors:
Raúl García,
M. Ángeles Herranz,
Edmund Leary,
M. Teresa González,
Gabino Rubio Bollinger,
Marius Bürkle,
Linda A. Zotti,
Yoshihiro Asai,
Fabian Pauly,
Juan Carlos Cuevas,
Nicolás Agraït,
Nazario Martín
Abstract:
We describe the synthesis and single molecule electrical transport properties of a molecular wire containing a $π$-extended tetrathiafulvalene (exTTF) group and its charge-transfer complex with F4TCNQ. We form single molecule junctions using the in-situ break junction technique using a home-built scanning tunneling microscope with a range of conductance between 10 G$_{0}$ down to 10$^{-7}$ G…
▽ More
We describe the synthesis and single molecule electrical transport properties of a molecular wire containing a $π$-extended tetrathiafulvalene (exTTF) group and its charge-transfer complex with F4TCNQ. We form single molecule junctions using the in-situ break junction technique using a home-built scanning tunneling microscope with a range of conductance between 10 G$_{0}$ down to 10$^{-7}$ G$_{0}$. Within this range we do not observe a clear conductance signature of the neutral parent molecule, suggesting either that its conductance is too low or that it does not form stable junctions. Conversely, we do find a clear conductance signature in the experiments carried out on the charge-transfer complex. Due to the fact we expected this species to have a higher conductance than the neutral molecule, we believe this supports the idea that the conductance of the neutral molecule is very low, below our measurement sensitivity. This is further supported by our theoretical calculations. To the best of our knowledge, these are the first reported single molecule conductance measurements on a molecular charge-transfer species.
△ Less
Submitted 25 June, 2015;
originally announced June 2015.
-
Resonant transport and electrostatic effects in single-molecule electrical junctions
Authors:
Carly Brooke,
Andrea Vezzoli,
Simon J. Higgins,
Linda A. Zotti,
J. J. Palacios,
Richard J. Nichols
Abstract:
In this contribution we demonstrate structural control over a transport resonance in HS(CH$_{2}$)$_{n}$[1,4 - C$_{6}$H$_{4}$](CH$_{2}$)$_{n}$SH (n = 1, 3, 4, 6) metal - molecule - metal junctions, fabricated and tested using the scanning tunnelling microscopy-based $I(z)$ method. The Breit-Wigner resonance originates from one of the arene $π$-bonding orbitals, which sharpens and moves closer to th…
▽ More
In this contribution we demonstrate structural control over a transport resonance in HS(CH$_{2}$)$_{n}$[1,4 - C$_{6}$H$_{4}$](CH$_{2}$)$_{n}$SH (n = 1, 3, 4, 6) metal - molecule - metal junctions, fabricated and tested using the scanning tunnelling microscopy-based $I(z)$ method. The Breit-Wigner resonance originates from one of the arene $π$-bonding orbitals, which sharpens and moves closer to the contact Fermi energy as $n$ increases. Varying the number of methylene groups thus leads to a very shallow decay of the conductance with the length of the molecule. We demonstrate that the electrical behaviour observed here can be straightforwardly rationalized by analyzing the effects caused by the electrostatic balance created at the metal-molecule interface. Such resonances offer future prospects in molecular electronics in terms of controlling charge transport over longer distances, and also in single molecule conductance switching if the resonances can be externally gated.
△ Less
Submitted 3 June, 2015;
originally announced June 2015.
-
Heat dissipation and its relation to thermopower in single-molecule junctions
Authors:
Linda Angela Zotti,
Marius Bürkle,
Fabian Pauly,
Woochul Lee,
Kyeongtae Kim,
Wonho Jeong,
Yoshihiro Asai,
Pramod Reddy,
Juan Carlos Cuevas
Abstract:
Motivated by recent experiments [Lee et al. Nature 498, 209 (2013)], we present here a detailed theoretical analysis of the Joule heating in current-carrying single-molecule junctions. By combining the Landauer approach for quantum transport with ab initio calculations, we show how the heating in the electrodes of a molecular junction is determined by its electronic structure. In particular, we sh…
▽ More
Motivated by recent experiments [Lee et al. Nature 498, 209 (2013)], we present here a detailed theoretical analysis of the Joule heating in current-carrying single-molecule junctions. By combining the Landauer approach for quantum transport with ab initio calculations, we show how the heating in the electrodes of a molecular junction is determined by its electronic structure. In particular, we show that in general the heat is not equally dissipated in both electrodes of the junction and it depends on the bias polarity (or equivalently on the current direction). These heating asymmetries are intimately related to the thermopower of the junction as both these quantities are governed by very similar principles. We illustrate these ideas by analyzing single-molecule junctions based on benzene derivatives with different anchoring groups. The close relation between heat dissipation and thermopower provides general strategies for exploring fundamental phenomena such as the Peltier effect or the impact of quantum interference effects on the Joule heating of molecular transport junctions.
△ Less
Submitted 31 July, 2013;
originally announced July 2013.
-
Heat dissipation in atomic-scale junctions
Authors:
Woochul Lee,
Kyeongtae Kim,
Wonho Jeong,
Linda Angela Zotti,
Fabian Pauly,
Juan Carlos Cuevas,
Pramod Reddy
Abstract:
Atomic and single-molecule junctions represent the ultimate limit to the miniaturization of electrical circuits. They are also ideal platforms to test quantum transport theories that are required to describe charge and energy transfer in novel functional nanodevices. Recent work has successfully probed electric and thermoelectric phenomena in atomic-scale junctions. However, heat dissipation and t…
▽ More
Atomic and single-molecule junctions represent the ultimate limit to the miniaturization of electrical circuits. They are also ideal platforms to test quantum transport theories that are required to describe charge and energy transfer in novel functional nanodevices. Recent work has successfully probed electric and thermoelectric phenomena in atomic-scale junctions. However, heat dissipation and transport in atomic-scale devices remain poorly characterized due to experimental challenges. Here, using custom-fabricated scanning probes with integrated nanoscale thermocouples, we show that heat dissipation in the electrodes of molecular junctions, whose transmission characteristics are strongly dependent on energy, is asymmetric, i.e. unequal and dependent on both the bias polarity and the identity of majority charge carriers (electrons vs. holes). In contrast, atomic junctions whose transmission characteristics show weak energy dependence do not exhibit appreciable asymmetry. Our results unambiguously relate the electronic transmission characteristics of atomic-scale junctions to their heat dissipation properties establishing a framework for understanding heat dissipation in a range of mesoscopic systems where transport is elastic. We anticipate that the techniques established here will enable the study of Peltier effects at the atomic scale, a field that has been barely explored experimentally despite interesting theoretical predictions. Furthermore, the experimental advances described here are also expected to enable the study of heat transport in atomic and molecular junctions, which is an important and challenging scientific and technological goal that has remained elusive.
△ Less
Submitted 31 July, 2013;
originally announced July 2013.
-
A Molecular Platinum Cluster Junction: A Single-Molecule Switch
Authors:
Linda A. Zotti,
Edmund Leary,
Maria Soriano,
Juan Carlos Cuevas,
Juan Jose Palacios
Abstract:
We present a theoretical study of the electronic transport through single-molecule junctions incorporating a Pt6 metal cluster bound within an organic framework. We show that the insertion of this molecule between a pair of electrodes leads to a fully atomically engineered nano-metallic device with high conductance at the Fermi level and two sequential high on/off switching states. The origin of t…
▽ More
We present a theoretical study of the electronic transport through single-molecule junctions incorporating a Pt6 metal cluster bound within an organic framework. We show that the insertion of this molecule between a pair of electrodes leads to a fully atomically engineered nano-metallic device with high conductance at the Fermi level and two sequential high on/off switching states. The origin of this property can be traced back to the existence of a HOMO which consists of two degenerate and asymmetric orbitals, lying close in energy to the Fermi level of the metallic leads. Their degeneracy is broken when the molecule is contacted to the leads, giving rise to two resonances which become pinned close to the Fermi level and display destructive interference.
△ Less
Submitted 26 February, 2013;
originally announced February 2013.
-
Carbon-fiber tips for scanning probe microscopes and molecular electronics experiments
Authors:
Gabino Rubio-Bollinger,
Andres Castellanos-Gomez,
Stefan Bilan,
Linda A. Zotti,
Carlos R. Arroyo,
Nicolás Agraït,
Juan Carlos Cuevas
Abstract:
We fabricate and characterize carbon-fiber tips for their use in combined scanning tunneling and force microscopy based on piezoelectric quartz tuning fork force sensors. An electrochemical fabrication procedure to etch the tips is used to yield reproducible sub-100-nm apex. We also study electron transport through single-molecule junctions formed by a single octanethiol molecule bonded by the thi…
▽ More
We fabricate and characterize carbon-fiber tips for their use in combined scanning tunneling and force microscopy based on piezoelectric quartz tuning fork force sensors. An electrochemical fabrication procedure to etch the tips is used to yield reproducible sub-100-nm apex. We also study electron transport through single-molecule junctions formed by a single octanethiol molecule bonded by the thiol anchoring group to a gold electrode and linked to a carbon tip by the methyl group. We observe the presence of conductance plateaus during the stretching of the molecular bridge, which is the signature of the formation of a molecular junction.
△ Less
Submitted 24 May, 2012;
originally announced May 2012.
-
Theoretical study of the charge transport through C60-based single-molecule junctions
Authors:
S. Bilan,
L. A. Zotti,
F. Pauly,
J. C. Cuevas
Abstract:
We present a theoretical study of the conductance and thermopower of single-molecule junctions based on C60 and C60-terminated molecules. We first analyze the transport properties of gold-C60-gold junctions and show that these junctions can be highly conductive (with conductances above 0.1G0, where G0 is the quantum of conductance). Moreover, we find that the thermopower in these junctions is nega…
▽ More
We present a theoretical study of the conductance and thermopower of single-molecule junctions based on C60 and C60-terminated molecules. We first analyze the transport properties of gold-C60-gold junctions and show that these junctions can be highly conductive (with conductances above 0.1G0, where G0 is the quantum of conductance). Moreover, we find that the thermopower in these junctions is negative due to the fact that the LUMO dominates the charge transport, and its magnitude can reach several tens of micro-V/K, depending on the contact geometry. On the other hand, we study the suitability of C60 as an anchoring group in single-molecule junctions. For this purpose, we analyze the transport through several dumbbell derivatives using C60 as anchors, and we compare the results with those obtained with thiol and amine groups. Our results show that the conductance of C60-terminated molecules is rather sensitive to the binding geometry. Moreover, the conductance of the molecules is typically reduced by the presence of the C60 anchors, which in turn makes the junctions more sensitive to the functionalization of the molecular core with appropriate side groups.
△ Less
Submitted 14 March, 2012;
originally announced March 2012.
-
Ab-initio study of the thermopower of biphenyl-based single-molecule junctions
Authors:
M. Bürkle,
L. A. Zotti,
J. K. Viljas,
D. Vonlanthen,
A. Mishchenko,
T. Wandlowski,
M. Mayor,
G. Schön,
F. Pauly
Abstract:
Employing ab-initio electronic structure calculations combined with the non-equilibrium Green's function technique, we study the dependence of the thermopower Q on the conformation in biphenyl-based single-molecule junctions. For the series of experimentally available biphenyl molecules, alkyl side chains allow us to gradually adjust the torsion angle φ between the two phenyl rings from 0 to 90° a…
▽ More
Employing ab-initio electronic structure calculations combined with the non-equilibrium Green's function technique, we study the dependence of the thermopower Q on the conformation in biphenyl-based single-molecule junctions. For the series of experimentally available biphenyl molecules, alkyl side chains allow us to gradually adjust the torsion angle φ between the two phenyl rings from 0 to 90° and to control in this way the degree of π-electron conjugation. Studying different anchoring groups and binding positions, our theory predicts that the absolute values of the thermopower decrease slightly towards larger torsion angles, following an a+b*cos^{2}φ dependence. The anchoring group determines the sign of Q and a,b, simultaneously. Sulfur and amine groups give rise to Q,a,b>0, while for cyano Q,a,b<0. The different binding positions can lead to substantial variations of the thermopower mostly due to changes in the alignment of the frontier molecular orbital levels and the Fermi energy. We explain our ab-initio results in terms of a π-orbital tight-binding model and a minimal two-level model, which describes the pair of hybridizing frontier orbital states on the two phenyl rings. The variations of the thermopower with φ seem to be within experimental resolution.
△ Less
Submitted 25 February, 2012;
originally announced February 2012.
-
Understanding the Electronic Transport Through Single Noble Gas Atoms
Authors:
L. A. Zotti,
M. Bürkle,
Y. J. Dappe,
F. Pauly,
J. C. Cuevas
Abstract:
We present a theoretical study of the conductance of atomic junctions comprising single noble gas atoms (He, Ne, Ar, Kr, and Xe) coupled to gold electrodes. The aim is to elucidate how the presence of noble gas atoms affects the electronic transport through metallic atomic-size contacts. Our analysis, based on density functional theory and including van der Waals interactions, shows that for the l…
▽ More
We present a theoretical study of the conductance of atomic junctions comprising single noble gas atoms (He, Ne, Ar, Kr, and Xe) coupled to gold electrodes. The aim is to elucidate how the presence of noble gas atoms affects the electronic transport through metallic atomic-size contacts. Our analysis, based on density functional theory and including van der Waals interactions, shows that for the lightest elements (He and Ne) no significant current flows through the noble gas atoms and their effect is to reduce the conductance of the junctions by screening the interaction between the gold electrodes. This explains the observations reported in metallic atomic-size contacts with adsorbed He atoms. Conversely, the heaviest atoms (Kr and Xe) increase the conductance due to the additional current path provided by their valence p states.
△ Less
Submitted 27 October, 2011;
originally announced October 2011.
-
Carbon tips as electrodes for single-molecule junctions
Authors:
Andres Castellanos-Gomez,
Stefan Bilan,
Linda A. Zotti,
Carlos R. Arroyo,
Nicolas Agrait,
Juan Carlos Cuevas,
Gabino Rubio-Bollinger
Abstract:
We study electron transport through single-molecule junctions formed by an octanethiol molecule bonded with the thiol anchoring group to a gold electrode and the opposing methyl endgroup to a carbon tip. Using the scanning tunneling microscope based break junction technique, we measure the electrical conductance of such molecular junctions. We observe the presence of well-defined conductance plate…
▽ More
We study electron transport through single-molecule junctions formed by an octanethiol molecule bonded with the thiol anchoring group to a gold electrode and the opposing methyl endgroup to a carbon tip. Using the scanning tunneling microscope based break junction technique, we measure the electrical conductance of such molecular junctions. We observe the presence of well-defined conductance plateaus during the stretching of the molecular bridge, which is the signature of the formation of a molecular junction.
△ Less
Submitted 3 November, 2011; v1 submitted 9 September, 2011;
originally announced September 2011.
