-
OASIS-UROS: Open Acquisition System for IEPE Sensors -- Upgraded, Refined, and Overhauled Software
Authors:
Oliver Maximilian Zobel,
Johannes Maierhofer,
Andreas Köstler,
Daniel J. Rixen
Abstract:
OASIS-UROS continues the previously published Open Acquisition System for IEPE Sensors (OASIS). While still building on the ESP32 microcontroller, this version improves the overall performance by switching to an SD card caching system and upgrading the analog-digital converter to an AD7606C-18, which has a higher resolution, provides eight channels, oversampling, and software-adjustable voltage ra…
▽ More
OASIS-UROS continues the previously published Open Acquisition System for IEPE Sensors (OASIS). While still building on the ESP32 microcontroller, this version improves the overall performance by switching to an SD card caching system and upgrading the analog-digital converter to an AD7606C-18, which has a higher resolution, provides eight channels, oversampling, and software-adjustable voltage ranges. Also improved is the IEPE front-end and power supply, as well as the firmware of the acquisition system, which can now achieve a sample rate of up to 36 kHz while sampling all eight channels. This paper documents the hardware and software of OASIS-UROS and provides all materials required to reproduce the open acquisition system. Lastly, the system was validated against commercial hardware and software in an experimental modal analysis context. This showed that the system performs close to the commercial one in some aspects with respect to the utilized test case. While OASIS-UROS cannot match the full performance of the commercial system, the developed system can be a viable alternative for students, people in academia, or smaller companies that have a constrained budget or require complete insight as well as adaptability of the hardware and software.
△ Less
Submitted 13 December, 2024; v1 submitted 27 November, 2024;
originally announced November 2024.
-
Enabling Experimental Impulse-Based Substructuring through Time Domain Deconvolution and Downsampling
Authors:
Oliver Maximilian Zobel,
Francesco Trainotti,
Daniel J. Rixen
Abstract:
Dynamic substructuring, especially the frequency-based variant (FBS) using frequency response functions (FRF), is gaining in popularity and importance, with countless successful applications, both numerically and experimentally. One drawback, however, is found when the responses to shocks are determined. Numerically, this might be especially expensive when a huge number of high-frequency modes hav…
▽ More
Dynamic substructuring, especially the frequency-based variant (FBS) using frequency response functions (FRF), is gaining in popularity and importance, with countless successful applications, both numerically and experimentally. One drawback, however, is found when the responses to shocks are determined. Numerically, this might be especially expensive when a huge number of high-frequency modes have to be accounted for to correctly predict response amplitudes to shocks. In all cases, the initial response predicted using frequency-based substructuring might be erroneous, due to the forced periodization of the Fourier transform. This drawback can be eliminated by completely avoiding the frequency domain and remaining in the time domain, using the impulse-based substructuring method (IBS), which utilizes impulse response functions (IRF). While this method has already been utilized successfully for numerical test cases, none of the attempted experimental applications were successful. In this paper, an experimental application of IBS to rods considered as one-dimensional is tested in the context of shock analysis, with the goal of correctly predicting the maximum driving point response peak. The challenges related to experimental IBS applications are discussed and an improvement attempt is made by limiting the frequency content considered through low-pass filtering and downsampling. The combination of a purely time domain based estimation procedure for the IRFs and the application of low-pass filtering with downsampling to the measured responses enabled a correct prediction of the initial shock responses of the rods with IBS experimentally, using displacements, velocities and accelerations.
△ Less
Submitted 23 April, 2024;
originally announced April 2024.
-
Drift Models on Complex Projective Space for Electron-Nuclear Double Resonance
Authors:
Henrik Wiechers,
Markus Zobel,
Marina Bennati,
Igor Tkach,
Benjamin Eltzner,
Stephan Huckemann,
Yvo Pokern
Abstract:
ENDOR spectroscopy is an important tool to determine the complicated three-dimensional structure of biomolecules and in particular enables measurements of intramolecular distances. Usually, spectra are determined by averaging the data matrix, which does not take into account the significant thermal drifts that occur in the measurement process. In contrast, we present an asymptotic analysis for the…
▽ More
ENDOR spectroscopy is an important tool to determine the complicated three-dimensional structure of biomolecules and in particular enables measurements of intramolecular distances. Usually, spectra are determined by averaging the data matrix, which does not take into account the significant thermal drifts that occur in the measurement process. In contrast, we present an asymptotic analysis for the homoscedastic drift model, a pioneering parametric model that achieves striking model fits in practice and allows both hypothesis testing and confidence intervals for spectra. The ENDOR spectrum and an orthogonal component are modeled as an element of complex projective space, and formulated in the framework of generalized Fréchet means. To this end, two general formulations of strong consistency for set-valued Fréchet means are extended and subsequently applied to the homoscedastic drift model to prove strong consistency. Building on this, central limit theorems for the ENDOR spectrum are shown. Furthermore, we extend applicability by taking into account a phase noise contribution leading to the heteroscedastic drift model. Both drift models offer improved signal-to-noise ratio over pre-existing models.
△ Less
Submitted 23 July, 2023;
originally announced July 2023.
-
Universal solvent restructuring induced by colloidal nanoparticles
Authors:
Mirijam Zobel,
Reinhard B. Neder,
Simon A. J. Kimber
Abstract:
Colloidal nanoparticles, used for applications from catalysis and energy applications to cosmetics, are typically embedded in matrixes or dispersed in solutions. The entire particle surface, which is where reactions are expected to occur, is thus exposed. Here we show with x-ray pair distribution function analysis that polar and non-polar solvents universally restructure around nanoparticles. Laye…
▽ More
Colloidal nanoparticles, used for applications from catalysis and energy applications to cosmetics, are typically embedded in matrixes or dispersed in solutions. The entire particle surface, which is where reactions are expected to occur, is thus exposed. Here we show with x-ray pair distribution function analysis that polar and non-polar solvents universally restructure around nanoparticles. Layers of enhanced order exist with a thickness influenced by the molecule size and up to 2 nanometers beyond the nanoparticle surface. These results show that the enhanced reactivity of solvated nanoparticles includes a contribution from a solvation shell of the size of the particle itself.
△ Less
Submitted 6 March, 2015;
originally announced March 2015.
