-
Atomistic Potentials for Palladium-Silver Hydrides
Authors:
L. M. Hale,
B. M. Wong,
J. A. Zimmerman,
X. Zhou
Abstract:
New EAM potentials for the ternary palladium-silver-hydrogen system are developed by extending a previously developed palladium-hydrogen potential. The ternary potentials accurately capture the heat of mixing and structural properties associated with solid solution alloys of palladium-silver. Stable hydrides are produced with properties that smoothly transition across the compositions. Additions o…
▽ More
New EAM potentials for the ternary palladium-silver-hydrogen system are developed by extending a previously developed palladium-hydrogen potential. The ternary potentials accurately capture the heat of mixing and structural properties associated with solid solution alloys of palladium-silver. Stable hydrides are produced with properties that smoothly transition across the compositions. Additions of silver to palladium are predicted to alter the properties of the hydrides by decreasing the miscibility gap and increasing the likelihood of hydrogen atoms occupying tetrahedral interstitial sites over octahedral interstitial sites.
△ Less
Submitted 21 December, 2013;
originally announced December 2013.
-
Energetics and diffusion of gold in bismuth telluride
Authors:
Michael C. Shaughnessy,
Josh D. Sugar,
Norm C. Bartelt,
Jonathan A. Zimmerman
Abstract:
We have coupled electron microscopy and energy dispersive spectroscopy experiments with \textit{ab-initio} modeling to study the solubility and diffusion of Au in Bi$_2$Te$_3$. We found that thermal annealing of Au films results in Au concentrations in Bi$_2$Te$_3$ above the previously reported solubility limit. The time scale of Au diffusion into Bi$_2$Te$_3$ is also much greater than expected. T…
▽ More
We have coupled electron microscopy and energy dispersive spectroscopy experiments with \textit{ab-initio} modeling to study the solubility and diffusion of Au in Bi$_2$Te$_3$. We found that thermal annealing of Au films results in Au concentrations in Bi$_2$Te$_3$ above the previously reported solubility limit. The time scale of Au diffusion into Bi$_2$Te$_3$ is also much greater than expected. To explain our observations, we calculate defect formation energies and diffusion barriers within DFT. We identify an interstitial mechanism consistent with the previously observed low solubility and (rapid) anisotropic diffusion. However, the lower formation energies of substitutional defects suggest that they may be active in our experiments and explain the high observed concentrations.
△ Less
Submitted 20 July, 2013; v1 submitted 2 May, 2013;
originally announced May 2013.
-
High-fidelity simulations of CdTe vapor deposition from a new bond-order potential-based molecular dynamics method
Authors:
X. W. Zhou,
D. Ward,
B. M. Wong,
F. P. Doty,
J. A. Zimmerman,
G. N. Nielson,
J. L. Cruz-Campa,
V. P. Gupta,
J. E. Granata,
J. J. Chavez,
D. Zubia
Abstract:
CdTe has been a special semiconductor for constructing the lowest-cost solar cells and the CdTe-based Cd1-xZnxTe alloy has been the leading semiconductor for radiation detection applications. The performance currently achieved for the materials, however, is still far below the theoretical expectations. This is because the property-limiting nanoscale defects that are easily formed during the growth…
▽ More
CdTe has been a special semiconductor for constructing the lowest-cost solar cells and the CdTe-based Cd1-xZnxTe alloy has been the leading semiconductor for radiation detection applications. The performance currently achieved for the materials, however, is still far below the theoretical expectations. This is because the property-limiting nanoscale defects that are easily formed during the growth of CdTe crystals are difficult to explore in experiments. Here we demonstrate the capability of a bond order potential-based molecular dynamics method for predicting the crystalline growth of CdTe films during vapor deposition simulations. Such a method may begin to enable defects generated during vapor deposition of CdTe crystals to be accurately explored.
△ Less
Submitted 19 June, 2012;
originally announced June 2012.
-
Modeling metallic island coalescence stress via adhesive contact between surfaces
Authors:
Steven C. Seel,
Jeffrey J. Hoyt,
Edmund B. Webb III,
Jonathan A. Zimmerman
Abstract:
Tensile stress generation associated with island coalescence is almost universally observed in thin films that grow via the Volmer-Weber mode. The commonly accepted mechanism for the origin of this tensile stress is a process driven by the reduction in surface energy at the expense of the strain energy associated with the deformation of coalescing islands during grain boundary formation. In the…
▽ More
Tensile stress generation associated with island coalescence is almost universally observed in thin films that grow via the Volmer-Weber mode. The commonly accepted mechanism for the origin of this tensile stress is a process driven by the reduction in surface energy at the expense of the strain energy associated with the deformation of coalescing islands during grain boundary formation. In the present work, we have performed molecular statics calculations using an embedded atom interatomic potential to obtain a functional form of the interfacial energy vs distance between two closely spaced free surfaces. The sum of interfacial energy plus strain energy provides a measure of the total system energy as a function of island separation. Depending on the initial separation between islands, we find that in cases where coalescence is thermodynamically favored, gap closure can occur either spontaneously or be kinetically limited due to an energetic barrier. Atomistic simulations of island coalescence using conjugate gradient energy minimization calculations agree well with the predicted stress as a function of island size from our model of spontaneous coalescence. Molecular dynamics simulations of island coalescence demonstrate that only modest barriers to coalescence can be overcome at room temperature. A comparison with thermally activated coalescence results at room temperature reveals that existing coalescence models significantly overestimate the magnitude of the stress resulting from island coalescence.
△ Less
Submitted 18 April, 2006; v1 submitted 18 November, 2005;
originally announced November 2005.
-
Dislocation Emission around Nanoindentations on a (001) fcc Metal Surface Studied by STM and Atomistic Simulations
Authors:
O. Rodriguez de la Fuente,
J. A. Zimmerman,
M. A. Gonzalez,
J. de la Figuera,
J. C. Hamilton,
Woei Wu Pai,
J. M. Rojo
Abstract:
We present a combined study by Scanning Tunneling Microscopy and atomistic simulations of the emission of dissociated dislocation loops by nanoindentation on a (001) fcc surface. The latter consist of two stacking-fault ribbons bounded by Shockley partials and a stair-rod dislocation. These dissociated loops, which intersect the surface, are shown to originate from loops of interstitial characte…
▽ More
We present a combined study by Scanning Tunneling Microscopy and atomistic simulations of the emission of dissociated dislocation loops by nanoindentation on a (001) fcc surface. The latter consist of two stacking-fault ribbons bounded by Shockley partials and a stair-rod dislocation. These dissociated loops, which intersect the surface, are shown to originate from loops of interstitial character emitted along the <110> directions and are usually located at hundreds of angstroms away from the indentation point. Simulations reproduce the nucleation and glide of these dislocation loops.
△ Less
Submitted 30 January, 2002;
originally announced January 2002.
-
Nuclear and Coulomb Interaction in the 8B to 7Be + p Breakup Reaction at sub-Coulomb Energies
Authors:
V. Guimaraes,
J. J. Kolata,
D. Peterson,
P. Santi,
R. H. White-Stevens,
S. M. Vincent,
F. D. Becchetti,
M. Y. Lee,
T. W. O'Donnell,
D. A. Roberts,
J. A. Zimmerman
Abstract:
The angular distribution for the breakup of 8B into 7Be+p on a 58Ni target has been measured at an incident energy of 25.75 MeV. The data are inconsistent with first-order theories but are remarkably well described by calculations including higher-order effects. The comparison with theory illustrates the importance of the exotic proton halo structure of 8B in accounting for the observed breakup…
▽ More
The angular distribution for the breakup of 8B into 7Be+p on a 58Ni target has been measured at an incident energy of 25.75 MeV. The data are inconsistent with first-order theories but are remarkably well described by calculations including higher-order effects. The comparison with theory illustrates the importance of the exotic proton halo structure of 8B in accounting for the observed breakup angular distribution.
△ Less
Submitted 21 December, 1999; v1 submitted 17 November, 1999;
originally announced November 1999.
