-
Local Clustering Decoder: a fast and adaptive hardware decoder for the surface code
Authors:
Abbas B. Ziad,
Ankit Zalawadiya,
Canberk Topal,
Joan Camps,
György P. Gehér,
Matthew P. Stafford,
Mark L. Turner
Abstract:
To avoid prohibitive overheads in performing fault-tolerant quantum computation, the decoding problem needs to be solved accurately and at speeds sufficient for fast feedback. Existing decoding systems fail to satisfy both of these requirements, meaning they either slow down the quantum computer or reduce the number of operations that can be performed before the quantum information is corrupted. W…
▽ More
To avoid prohibitive overheads in performing fault-tolerant quantum computation, the decoding problem needs to be solved accurately and at speeds sufficient for fast feedback. Existing decoding systems fail to satisfy both of these requirements, meaning they either slow down the quantum computer or reduce the number of operations that can be performed before the quantum information is corrupted. We introduce the Local Clustering Decoder as a solution that simultaneously achieves the accuracy and speed requirements of a real-time decoding system. Our decoder is implemented on FPGAs and exploits hardware parallelism to keep pace with the fastest qubit types. Further, it comprises an adaptivity engine that allows the decoder to update itself in real-time in response to control signals, such as heralded leakage events. Under a realistic circuit-level noise model where leakage is a dominant error source, our decoder enables one million error-free quantum operations with 4x fewer physical qubits when compared to standard non-adaptive decoding. This is achieved whilst decoding in under 1 us per round with modest FPGA resources, demonstrating that high-accuracy real-time decoding is possible, and reducing the qubit counts required for large-scale fault-tolerant quantum computation.
△ Less
Submitted 15 November, 2024;
originally announced November 2024.
-
A real-time, scalable, fast and highly resource efficient decoder for a quantum computer
Authors:
Ben Barber,
Kenton M. Barnes,
Tomasz Bialas,
Okan Buğdaycı,
Earl T. Campbell,
Neil I. Gillespie,
Kauser Johar,
Ram Rajan,
Adam W. Richardson,
Luka Skoric,
Canberk Topal,
Mark L. Turner,
Abbas B. Ziad
Abstract:
To unleash the potential of quantum computers, noise effects on qubits' performance must be carefully managed. The decoders responsible for diagnosing noise-induced computational errors must use resources efficiently to enable scaling to large qubit counts and cryogenic operation. Additionally, they must operate at speed, to avoid an exponential slowdown in the logical clock rate of the quantum co…
▽ More
To unleash the potential of quantum computers, noise effects on qubits' performance must be carefully managed. The decoders responsible for diagnosing noise-induced computational errors must use resources efficiently to enable scaling to large qubit counts and cryogenic operation. Additionally, they must operate at speed, to avoid an exponential slowdown in the logical clock rate of the quantum computer. To overcome such challenges, we introduce the Collision Clustering decoder and implement it on FPGA and ASIC hardware. We simulate logical memory experiments using the leading quantum error correction scheme, the surface code, and demonstrate MHz decoding speed - matching the requirements of fast-operating modalities such as superconducting qubits - up to an 881 and 1057 qubits surface code with the FPGA and ASIC, respectively. The ASIC design occupies 0.06 mm$^2$ and consumes only 8 mW of power. Our decoder is both highly performant and resource efficient, unlocking a viable path to practically realising fault-tolerant quantum computers.
△ Less
Submitted 24 September, 2024; v1 submitted 11 September, 2023;
originally announced September 2023.
-
Potential and sky coverage for off-axis fringe tracking in optical long baseline interferometry
Authors:
Abdelkarim Boskri,
Romain G. Petrov,
Thami El Halkouj,
Massinissa Hadjara,
James Leftley,
Zouhair Benkhaldoun,
Pierre Cruzalèbes,
Aziz Ziad,
Marcel Carbillet
Abstract:
The spectacular results provided by the second-generation VLTI instruments GRAVITY and MATISSE on active galactic nuclei (AGN) trigger and justify a strong increase in the sensitivity limit of optical interferometers. A key component of such an upgrade is off-axis fringe tracking. To evaluate its potential and limitations, we describe and analyse its error budget including fringe sensing precision…
▽ More
The spectacular results provided by the second-generation VLTI instruments GRAVITY and MATISSE on active galactic nuclei (AGN) trigger and justify a strong increase in the sensitivity limit of optical interferometers. A key component of such an upgrade is off-axis fringe tracking. To evaluate its potential and limitations, we describe and analyse its error budget including fringe sensing precision and temporal, angular and chromatic perturbations of the piston. The global tracking error is computed using standard seeing parameters for different sites, seeing conditions and telescope sizes for the current GRAVITY Fringe Tracker (GFT) and a new concept of Hierarchical Fringe Tracker. Then, it is combined with a large catalogue of guide star candidates from Gaia to produce sky coverage maps that give the probability to find a usable off-axis guide star in any part of the observable sky. These maps can be used to set the specifications of the system, check its sensitivity to seeing conditions, and evaluate the feasibility of science programs. We check the availability of guide stars and the tracking accuracy for a large set of 15 799 Quasars to confirm the feasibility of a large program on Broad Line Regions in the K band with the GFT and show how it can be extended to the L, M, and N bands. Another set of 331 well-characterized nearby AGNs shows the high potential of MATISSE for imaging and characterization of the dust torus in the N band under off-axis tracking on both Unit Telescopes and Auxiliary Telescopes.
△ Less
Submitted 13 July, 2021; v1 submitted 9 July, 2021;
originally announced July 2021.
-
Turbulence monitoring at Calern observatory with the Generalised Differential Image Motion Monitor
Authors:
Eric Aristidi,
Yan Fantéï-Caujolle,
Aziz Ziad,
Julien Chabé,
Christophe Giordano,
Catherine Renaud,
Alohotsy Rafalimanana
Abstract:
The Generalised Differential Image Motion Monitor (GDIMM) was proposed a few years ago as a new generation instrument for turbulence monitoring. It measures integrated parameters of the optical turbulence, i.e the seeing, isoplanatic angle, scintillation index, coherence time and wavefront coherence outer scale. GDIMM is based on a fully automatic small telescope (28cm diameter), equipped with a 3…
▽ More
The Generalised Differential Image Motion Monitor (GDIMM) was proposed a few years ago as a new generation instrument for turbulence monitoring. It measures integrated parameters of the optical turbulence, i.e the seeing, isoplanatic angle, scintillation index, coherence time and wavefront coherence outer scale. GDIMM is based on a fully automatic small telescope (28cm diameter), equipped with a 3-holes mask at its entrance pupil. The instrument is installed at the Calern observatory (France) and performs continuous night-time monitoring of turbulence parameters. In this communication we present long-term and seasonnal statistics obtained at Calern, and combine GDIMM data to provide quantities such as the equivalent turbulence altitude and the effective wind speed.
△ Less
Submitted 17 December, 2020; v1 submitted 16 December, 2020;
originally announced December 2020.
-
Dome C coherence time statistics from DIMM data
Authors:
E. Aristidi,
A. Agabi,
L. Abe,
E. Fossat,
A. Ziad,
D. Mékarnia
Abstract:
We present a reanalysis of several years of DIMM data at the site of Dome C, Antarctica, to provide measurements of the coherence time $τ_0$. Statistics and seasonal behaviour of $τ_0$ are given at two heights above the ground, 3m and 8m, for the wavelength $λ=500$nm. We found an annual median value of $2.9$ms at the height of 8m. A few measurements could also be obtained at the height of 20m and…
▽ More
We present a reanalysis of several years of DIMM data at the site of Dome C, Antarctica, to provide measurements of the coherence time $τ_0$. Statistics and seasonal behaviour of $τ_0$ are given at two heights above the ground, 3m and 8m, for the wavelength $λ=500$nm. We found an annual median value of $2.9$ms at the height of 8m. A few measurements could also be obtained at the height of 20m and give a median value of 6ms during the period June--September. For the first time, we provide measurements of $τ_0$ in daytime during the summer, which appears to show the same time dependence as the seeing with a sharp maximum at 5pm local time. Exceptional values of $τ_0$ above 10ms are met at this particular moment. The continuous slow variations of turbulence conditions during the day offers a natural test bed for a solar adaptive optics system.
△ Less
Submitted 24 June, 2020;
originally announced June 2020.
-
Monitoring daytime and nighttime optical turbulence profiles with the PML instrument
Authors:
Eric Aristidi,
Aziz Ziad,
Yan Fantéï-Caujolle,
Julien Chabé,
Christophe Giordano,
Catherine Renaud,
Henri Lantéri
Abstract:
The Profiler of Moon Limb is a recent instrument dedicated to the monitoring of optical turbulence profile of the atmosphere. Fluctuations of the Moon or the Sun limb allow to evaluate the index refraction structure constant C_n^2(h) and the wavefront coherence outer scale L_0(h) as a function of the altitude $h$. The atmosphere is split into 33 layers with an altitude resolution varying from 100m…
▽ More
The Profiler of Moon Limb is a recent instrument dedicated to the monitoring of optical turbulence profile of the atmosphere. Fluctuations of the Moon or the Sun limb allow to evaluate the index refraction structure constant C_n^2(h) and the wavefront coherence outer scale L_0(h) as a function of the altitude $h$. The atmosphere is split into 33 layers with an altitude resolution varying from 100m (at the ground) to 2km (in the upper atmosphere). Profiles are obtained every 3mn during daytime and nighttime. We report last advances on the instrument and present some results obtained at the Plateau de Calern (France).
△ Less
Submitted 12 February, 2020;
originally announced February 2020.
-
A generalized differential image motion monitor
Authors:
E. Aristidi,
A. Ziad,
J. Chabe,
Y. Fantei-Caujolle,
C. Renaud,
C. Giordano
Abstract:
We present the Generalised Differential Image Motion Monitor. It is a compact instrument dedicated to measure 4 parameters of the optical turbulence: seeing, isoplanatic angle, coherence time and wavefront coherence outer scale. GDIMM is based on a small telescope (28cm diameter) equipped with a 3-holes mask at its entrance pupil. The instrument is fully automatic, and performs continuous monitori…
▽ More
We present the Generalised Differential Image Motion Monitor. It is a compact instrument dedicated to measure 4 parameters of the optical turbulence: seeing, isoplanatic angle, coherence time and wavefront coherence outer scale. GDIMM is based on a small telescope (28cm diameter) equipped with a 3-holes mask at its entrance pupil. The instrument is fully automatic, and performs continuous monitoring of turbulence parameters at the Calern Observatory (France). This paper gives a description of the instrument, data processing and error budget. We present also statistics of 3.5 years of monitoring of turbulence parameters above the Calern Observatory.
△ Less
Submitted 15 April, 2019;
originally announced April 2019.
-
A new generalized differential image motion monitor
Authors:
Eric Aristidi,
Yan Fantei-Caujolle,
Aziz Ziad,
Cécile Dimur,
Julien Chabé,
Baptiste Roland
Abstract:
We present first results of a new instrument, the Generalized Differential Image Motion Monitor (GDIMM), aiming at monitoring parameters of the optical turbulence (seeing, isoplanatic angle, coherence time and outer scale). GDIMM is based on a small telescope equipped with a 3-holes mask at its entrance pupil. The seeing is measured by the classical DIMM technique using two sub-pupils of the mask…
▽ More
We present first results of a new instrument, the Generalized Differential Image Motion Monitor (GDIMM), aiming at monitoring parameters of the optical turbulence (seeing, isoplanatic angle, coherence time and outer scale). GDIMM is based on a small telescope equipped with a 3-holes mask at its entrance pupil. The seeing is measured by the classical DIMM technique using two sub-pupils of the mask (6 cm diameter separated by a distance of 20 cm), the isoplanatic angle is estimated from scintillation through the third sub-pupil (its diameter is 10 cm, with a central obstruction of 4 cm). The coherence time is deduced from the temporal structure function of the angle of arrival (AA) fluctuations, thanks to the high-speed sampling rate of the camera. And the difference of the motion variances from sub-apertures of different diameters makes it possible to estimate the outer scale. GDIMM is a compact and portable instrument, and can be remotely controlled by an operator. We show in this paper the first results of test campaigns obtained in 2013 and 2014 at Nice observatory and the Plateau de Calern (France). Comparison with simultaneous data obtained with the Generalized Seeing Monitor (GSM) are also presented.
△ Less
Submitted 19 November, 2018;
originally announced November 2018.
-
Turbulence monitoring at the Plateau de Calern with the GDIMM instrument
Authors:
Eric Aristidi,
Yan Fantei-Caujolle,
Julien Chabé,
Catherine Renaud,
Aziz Ziad,
Malak Ben Rahhal
Abstract:
We present some statistics of turbulence monitoring at the Plateau de Calern (France), with the Generalised Differential Image Motion Monitor (GDIMM). This instrument allows to measure integrated parameters of the atmospheric turbulence, i.e. seeing, isoplanatic angle, coherence time and outer scale, with 2 minutes time resolution. It is running routinely since November 2015 and is now fully autom…
▽ More
We present some statistics of turbulence monitoring at the Plateau de Calern (France), with the Generalised Differential Image Motion Monitor (GDIMM). This instrument allows to measure integrated parameters of the atmospheric turbulence, i.e. seeing, isoplanatic angle, coherence time and outer scale, with 2 minutes time resolution. It is running routinely since November 2015 and is now fully automatic. A large dataset has been collected, leading to the first statistics of turbulence above the Plateau de Calern.
△ Less
Submitted 18 November, 2018;
originally announced November 2018.
-
High-Resolution Altitude Profiles of the Atmospheric Turbulence with PML at the Sutherland Observatory
Authors:
L. Catala,
A. Ziad,
Y. Fantei-Caujolle,
S. M. Crawford,
D. A. H. Buckley,
J. Borgnino,
F. Blary,
M. Nickola,
T. Pickering
Abstract:
With the prospect of the next generation of ground-based telescopes, the extremely large telescopes (ELTs), increasingly complex and demanding adaptive optics (AO) systems are needed. This is to compensate for image distortion caused by atmospheric turbulence and fully take advantage of mirrors with diameters of 30 to 40 m. This requires a more precise characterization of the turbulence. The PML (…
▽ More
With the prospect of the next generation of ground-based telescopes, the extremely large telescopes (ELTs), increasingly complex and demanding adaptive optics (AO) systems are needed. This is to compensate for image distortion caused by atmospheric turbulence and fully take advantage of mirrors with diameters of 30 to 40 m. This requires a more precise characterization of the turbulence. The PML (Profiler of Moon Limb) was developed within this context. The PML aims to provide high-resolution altitude profiles of the turbulence using differential measurements of the Moon limb position to calculate the transverse spatio-angular covariance of the Angle of Arrival fluctuations. The covariance of differential image motion for different separation angles is sensitive to the altitude distribution of the seeing. The use of the continuous Moon limb provides a large number of separation angles allowing for the high-resolution altitude of the profiles. The method is presented and tested with simulated data. Moreover a PML instrument was deployed at the Sutherland Observatory in South Africa in August 2011. We present here the results of this measurement campaign.
△ Less
Submitted 27 January, 2017;
originally announced January 2017.
-
Experimental confirmation of long-memory correlations in star-wander data
Authors:
Luciano Zunino,
Damián Gulich,
Gustavo Funes,
Aziz Ziad
Abstract:
In this letter we have analyzed the temporal correlations of the angle-of-arrival fluctuations of stellar images. Experimentally measured data were carefully examined by implementing multifractal detrended fluctuation analysis. This algorithm is able to discriminate the presence of fractal and multifractal structures in recorded time sequences. We have confirmed that turbulence-degraded stellar wa…
▽ More
In this letter we have analyzed the temporal correlations of the angle-of-arrival fluctuations of stellar images. Experimentally measured data were carefully examined by implementing multifractal detrended fluctuation analysis. This algorithm is able to discriminate the presence of fractal and multifractal structures in recorded time sequences. We have confirmed that turbulence-degraded stellar wavefronts are compatible with a long-memory correlated monofractal process. This experimental result is quite significant for the accurate comprehension and modeling of the atmospheric turbulence effects on the stellar images. It can also be of great utility within the adaptive optics field.
△ Less
Submitted 30 June, 2014;
originally announced June 2014.
-
First on-sky results of the CO-SLIDAR Cn2 profiler
Authors:
Juliette Voyez,
Clélia Robert,
Jean-Marc Conan,
Laurent M. Mugnier,
Etienne Samain,
Aziz Ziad
Abstract:
COupled SLope and scIntillation Detection And Ranging (CO-SLIDAR) is a recent profiling method of the vertical distribution of atmospheric turbulence strength ($C_n^2$ profile). It takes advantage of correlations of slopes and of scintillation, both measured with a Shack-Hartmann wavefront sensor on a binary star.
In this paper, we present the improved CO-SLIDAR reconstruction method of the…
▽ More
COupled SLope and scIntillation Detection And Ranging (CO-SLIDAR) is a recent profiling method of the vertical distribution of atmospheric turbulence strength ($C_n^2$ profile). It takes advantage of correlations of slopes and of scintillation, both measured with a Shack-Hartmann wavefront sensor on a binary star.
In this paper, we present the improved CO-SLIDAR reconstruction method of the $C_n^2$ profile and the first on-sky results of the CO-SLIDAR profiler. We examine CO-SLIDAR latest performance in simulation, taking into account the detection noise bias and estimating error bars along with the turbulence profile. The estimated $C_n^2$ profiles demonstrate the accuracy of the CO-SLIDAR method, showing sensitivity to both low and high altitude turbulent layers. CO-SLIDAR is tested on-sky for the first time, on the $1.5$~m MeO (Métrologie Optique) telescope at Observatoire de la Cote d'Azur (France).
The reconstructed profiles are compared to turbulence profiles estimated from meteorological data and a good agreement is found. We discuss CO-SLIDAR's contribution in the $C_n^2$ profilers' landscape and we propose some improvements of the instrument.
△ Less
Submitted 18 February, 2014;
originally announced February 2014.
-
Dome C site testing: surface layer, free atmosphere seeing and isoplanatic angle statistics
Authors:
E. Aristidi,
E. Fossat,
A. Agabi,
D. Mekarnia,
F. Jeanneaux,
E. Bondoux,
Z. Challita,
A. Ziad,
J. Vernin,
H. Trinquet
Abstract:
This paper analyses 3.5 years of site testing data obtained at Dome C, Antarctica, based on measurements obtained with three DIMMs located at three different elevations. Basic statistics of the seeing and the isoplanatic angle are given, as well as the characteristic time of temporal fluctuations of these two parameters, which we found to around 30 minutes at 8 m. The 3 DIMMs are exploited as a…
▽ More
This paper analyses 3.5 years of site testing data obtained at Dome C, Antarctica, based on measurements obtained with three DIMMs located at three different elevations. Basic statistics of the seeing and the isoplanatic angle are given, as well as the characteristic time of temporal fluctuations of these two parameters, which we found to around 30 minutes at 8 m. The 3 DIMMs are exploited as a profiler of the surface layer, and provide a robust estimation of its statistical properties. It appears to have a very sharp upper limit (less than 1 m). The fraction of time spent by each telescope above the top of the surface layer permits us to deduce a median height of between 23 m and 27 m. The comparison of the different data sets led us to infer the statistical properties of the free atmosphere seeing, with a median value of 0.36 arcsec. The C_n^2 profile inside the surface layer is also deduced from the seeing data obtained during the fraction of time spent by the 3 telescopes inside this turbulence. Statistically, the surface layer, except during the 3-month summer season, contributes to 95 percent of the total turbulence from the surface level, thus confirming the exceptional quality of the site above it.
△ Less
Submitted 20 April, 2009;
originally announced April 2009.
-
First whole atmosphere night-time seeing measurements at Dome C, Antarctica
Authors:
Abdelkrim Agabi,
Eric Aristidi,
Max Azouit,
Eric Fossat,
Francois Martin,
Tatiana Sadibekova,
Jean Vernin,
Aziz Ziad
Abstract:
We report site testing results obtained in night-time during the polar autumn and winter at Dome C. These results were collected during the first Concordia winterover by A. Agabi. They are based upon seeing and isoplanatic angle monitoring, as well as in-situ balloon measurements 2 of the refractive index structure constant profiles Cn (h). Atmosphere is divided into two regions: (i) a 36 m high…
▽ More
We report site testing results obtained in night-time during the polar autumn and winter at Dome C. These results were collected during the first Concordia winterover by A. Agabi. They are based upon seeing and isoplanatic angle monitoring, as well as in-situ balloon measurements 2 of the refractive index structure constant profiles Cn (h). Atmosphere is divided into two regions: (i) a 36 m high surface layer responsible of 87% of the turbulence and (ii) a very stable free atmosphere above with a median seeing of 0.36+-0.19 arcsec at an elevation of h = 30 m. The median seeing measured with a DIMM placed on top of a 8.5 m high tower is 1.3+-0.8 arcsec.
△ Less
Submitted 14 October, 2005;
originally announced October 2005.
-
Site testing in summer at Dome C, Antarctica
Authors:
Eric Aristidi,
Abdelkrim Agabi,
Eric Fossat,
Max Azouit,
Francois Martin,
Tatiana Sadibekova,
Tony Travouillon,
Jean Vernin,
Aziz Ziad
Abstract:
We present summer site testing results based on DIMM data obtained at Dome C, Antarctica. These data have been collected on the bright star Canopus during two 3-months summer campaigns in 2003-2004 and 2004-2005. We performed continuous monitoring of the seeing a nd the isoplanatic angle in the visible. We found a median seeing of 0.54 \arcsec and a median isoplanatic angle of 6.8 \arcsec. The s…
▽ More
We present summer site testing results based on DIMM data obtained at Dome C, Antarctica. These data have been collected on the bright star Canopus during two 3-months summer campaigns in 2003-2004 and 2004-2005. We performed continuous monitoring of the seeing a nd the isoplanatic angle in the visible. We found a median seeing of 0.54 \arcsec and a median isoplanatic angle of 6.8 \arcsec. The seeing appears to have a deep minimum around 0.4 \arcsec almost every day in late afternoon.
△ Less
Submitted 20 July, 2005;
originally announced July 2005.