Showing 51–100 of 168 results for author: Yoshioka, K

Demonstration of wideband metal mesh filters for submillimeter astrophysics using flexible printed circuits

Authors: Shinsuke Uno, Tatsuya Takekoshi, Tai Oshima, Keisuke Yoshioka, Kah Wuy Chin, Kotaro Kohno

Abstract: We developed a wideband quasi-optical band-pass filter covering 170-520 GHz by exploiting the recent advancements in commercially available flexible printed circuit (FPC) fabrication technologies. We designed and fabricated a three-layered stack of loaded hexagonal grid metal meshes using a copper pattern with a narrowest linewidth of $50~μ\mathrm{m}$ on a polyimide substrate. The measured frequen… ▽ More We developed a wideband quasi-optical band-pass filter covering 170-520 GHz by exploiting the recent advancements in commercially available flexible printed circuit (FPC) fabrication technologies. We designed and fabricated a three-layered stack of loaded hexagonal grid metal meshes using a copper pattern with a narrowest linewidth of $50~μ\mathrm{m}$ on a polyimide substrate. The measured frequency pass-band shape was successfully reproduced through a numerical simulation using a set of parameters consistent with the dimensions of the fabricated metal meshes. FPC-based metal mesh filters will provide a new pathway toward the on-demand development of millimeter/submillimeter-wave quasi-optical filters at low cost and with a short turnaround time. △ Less

Submitted 30 March, 2020; originally announced March 2020.

Comments: 14 pages, 11 figures, 2 tables, accepted for publication in Applied Optics

Active spatial control of terahertz graphene plasmons by tailoring carrier density profile

Authors: Ngoc Han Tu, Katsumasa Yoshioka, Satoshi Sasaki, Makoto Takamura, Koji Muraki, Norio Kumada

Abstract: Graphene offers a possibility for actively controlling plasmon confinement and propagation by tailoring its spatial conductivity pattern. However, implementation of this concept has been hampered because uncontrollable plasmon reflection is easily induced by inhomogeneous dielectric environment. In this work, we demonstrate full electrical control of plasmon reflection/transmission at electronic b… ▽ More Graphene offers a possibility for actively controlling plasmon confinement and propagation by tailoring its spatial conductivity pattern. However, implementation of this concept has been hampered because uncontrollable plasmon reflection is easily induced by inhomogeneous dielectric environment. In this work, we demonstrate full electrical control of plasmon reflection/transmission at electronic boundaries induced by a zinc-oxide-based dual gate, which is designed to minimize the dielectric modulation. Using Fourier-transform infrared spectroscopy, we show that the plasmon reflection can be varied continuously with the carrier density difference between the adjacent regions. By utilizing this functionality, we show the ability to control size, position, and frequency of plasmon cavities. Our approach can be applied to various types of plasmonic devices, paving the way for implementing a programmable plasmonic circuit. △ Less

Submitted 19 November, 2019; originally announced November 2019.

Comments: to be published in Communications Materials

Geometrical analysis of Kerr-lens mode-locking for high-peak-power ultrafast oscillators

Authors: Peiyu Xia, Makoto Kuwata-Gonokami, Kosuke Yoshioka

Abstract: Ultrashort pulses from Kerr-lens mode-locked oscillators have inspired a variety of applications. The design and alignment of these laser resonators have thus far been theoretically supported by the conventional analysis of beam propagation. However, the well-established theoretical framework is sometimes beyond the scope of high-peak-power oscillators. In this paper, we analyze the geometry of ri… ▽ More Ultrashort pulses from Kerr-lens mode-locked oscillators have inspired a variety of applications. The design and alignment of these laser resonators have thus far been theoretically supported by the conventional analysis of beam propagation. However, the well-established theoretical framework is sometimes beyond the scope of high-peak-power oscillators. In this paper, we analyze the geometry of ring resonators by extending the ABCD-matrix method to a high-peak-power regime. The guidelines to achieving stable Kerr-lens mode-locking is provided for high-peak-power pulses. △ Less

Submitted 21 March, 2020; v1 submitted 5 October, 2019; originally announced October 2019.

Comments: 9 pages, 4 figures, Submitted to OSA Publishing

Terahertz Faraday and Kerr rotation spectroscopy of Bi$_{1-x}$Sb$_x$ films in high magnetic fields up to 30 Tesla

Authors: Xinwei Li, Katsumasa Yoshioka, Ming Xie, G. Timothy Noe II, Woojoo Lee, Nicolas Marquez Peraca, Weilu Gao, Toshio Hagiwara, Handegard S. Orjan, Li-Wei Nien, Tadaaki Nagao, Masahiro Kitajima, Hiroyuki Nojiri, Chih-Kang Shih, Allan H. MacDonald, Ikufumi Katayama, Jun Takeda, Gregory A. Fiete, Junichiro Kono

Abstract: We report results of terahertz Faraday and Kerr rotation spectroscopy measurements on thin films of $\text{Bi}_{1-x}\text{Sb}_{x}$, an alloy system that exhibits a semimetal-to-topological-insulator transition as the Sb composition $x$ increases. By using a single-shot time-domain terahertz spectroscopy setup combined with a table-top pulsed mini-coil magnet, we conducted measurements in magnetic… ▽ More We report results of terahertz Faraday and Kerr rotation spectroscopy measurements on thin films of $\text{Bi}_{1-x}\text{Sb}_{x}$, an alloy system that exhibits a semimetal-to-topological-insulator transition as the Sb composition $x$ increases. By using a single-shot time-domain terahertz spectroscopy setup combined with a table-top pulsed mini-coil magnet, we conducted measurements in magnetic fields up to 30~T, observing distinctly different behaviors between semimetallic ($x < 0.07$) and topological insulator ($x > 0.07$) samples. Faraday and Kerr rotation spectra for the semimetallic films showed a pronounced dip that blue-shifted with the magnetic field, whereas spectra for the topological insulator films were positive and featureless, increasing in amplitude with increasing magnetic field and eventually saturating at high fields ($>$20~T). Ellipticity spectra for the semimetallic films showed resonances, whereas the topological insulator films showed no detectable ellipticity. To explain these observations, we developed a theoretical model based on realistic band parameters and the Kubo formula for calculating the optical conductivity of Landau-quantized charge carriers. Our calculations quantitatively reproduced all experimental features, establishing that the Faraday and Kerr signals in the semimetallic films predominantly arise from bulk hole cyclotron resonances while the signals in the topological insulator films represent combined effects of surface carriers originating from multiple electron and hole pockets. These results demonstrate that the use of high magnetic fields in terahertz magnetopolarimetry, combined with detailed electronic structure and conductivity calculations, allows us to unambiguously identify and quantitatively determine unique contributions from different species of carriers of topological and nontopological nature in Bi$_{1-x}$Sb$_x$. △ Less

Submitted 28 June, 2019; originally announced July 2019.

Comments: 17 pages, 22 figures

Journal ref: Phys. Rev. B 100, 115145 (2019)

The Western Bulge of 162173 Ryugu Formed as a Result of a Rotationally Driven Deformation Process

Authors: Masatoshi Hirabayashi, Eri Tatsumi, Hideaki Miyamoto, Goro Komatsu, Seiji Sugita, Sei-ichiro Watanabe, Daniel J. Scheeres, Olivier S. Barnouin, Patrick Michel, Chikatoshi Honda, Tatsuhiro Michikami, Yuichiro Cho, Tomokatsu Morota, Naru Hirata, Naoyuki Hirata, Naoya Sakatani, Stephen R. Schwartz, Rie Honda, Yasuhiro Yokota, Shingo Kameda, Hidehiko Suzuki, Toru Kouyama, Masahiko Hayakawa, Moe Matsuoka, Kazuo Yoshioka , et al. (4 additional authors not shown)

Abstract: 162173 Ryugu, the target of Hayabusa2, has a round shape with an equatorial ridge, which is known as a spinning top-shape. A strong centrifugal force is a likely contributor to Ryugu's top-shaped features. Observations by Optical Navigation Camera onboard Hayabusa2 show a unique longitudinal variation in geomorphology; the western side of this asteroid, later called the western bulge, has a smooth… ▽ More 162173 Ryugu, the target of Hayabusa2, has a round shape with an equatorial ridge, which is known as a spinning top-shape. A strong centrifugal force is a likely contributor to Ryugu's top-shaped features. Observations by Optical Navigation Camera onboard Hayabusa2 show a unique longitudinal variation in geomorphology; the western side of this asteroid, later called the western bulge, has a smooth surface and a sharp equatorial ridge, compared to the other side. Here, we propose a structural deformation process that generated the western bulge. Applying the mission-derived shape model, we employ a finite element model technique to analyze the locations that experience structural failure within the present shape. Assuming that materials are uniformly distributed, our model shows the longitudinal variation in structurally failed regions when the spin period is shorter than ~3.75 h. Ryugu is structurally intact in the subsurface region of the western bulge while other regions are sensitive to structural failure. We infer that this variation is indicative of the deformation process that occurred in the past, and the western bulge is more relaxed structurally than the other region. Our analysis also shows that this deformation process might occur at a spin period between ~3.5 h and ~3.0 h, providing the cohesive strength ranging between ~4 Pa and ~10 Pa. △ Less

Submitted 6 April, 2019; originally announced April 2019.

Comments: 8 pages, 5 figures, published in the Astrophysical Journal Letters, 874, 1, L10

Observation of ultra-high mobility excitons in a strain field by space- and time-resolved spectroscopy at sub-Kelvin temperatures

Authors: Yusuke Morita, Hirosuke Suzuki, Kosuke Yoshioka, Makoto Kuwata-Gonokami

Abstract: We measured basic parameters such as the lifetime, mobility, and diffusion constant of trapped paraexcitons in cuprous oxide at very low temperatures (below 1 K) using a dilution refrigerator. To obtain these parameters, we observed the space- and time-resolved luminescence spectrum of paraexcitons in strain-induced trap potential. We extracted the lifetime of 410 ns from the measurements of the d… ▽ More We measured basic parameters such as the lifetime, mobility, and diffusion constant of trapped paraexcitons in cuprous oxide at very low temperatures (below 1 K) using a dilution refrigerator. To obtain these parameters, we observed the space- and time-resolved luminescence spectrum of paraexcitons in strain-induced trap potential. We extracted the lifetime of 410 ns from the measurements of the decay of the luminescence intensity. By comparing the experimental results and numerical calculations, we found that the mobility and the diffusion constant increase as the temperature of the paraexcitons decreases below 1 K. In particular, we obtained a mobility of 5.1e7 cm^2/V*s at the corresponding temperature of 280 mK. To the best of our knowledge, this value is the highest exciton mobility that has been measured. These results show that the mean free path of the paraexcitons reaches a size (~300 um) comparable to that of the cloud of trapped paraexcitons (~100 um). From our analyses, we found that the spatial distribution of the paraexcitons can reach a distribution that is defined by the statistical distribution function and the shape of the three-dimensional trap potential at ultra-low temperatures (well below 1 K). Our survey shows that the ultra-low temperature ensures that the Bose--Einstein condensation transition in a trap potential can be investigated by examining the spatial distribution of the density of 1s paraexcitons. △ Less

Submitted 31 March, 2019; originally announced April 2019.

Journal ref: Phys. Rev. B 100, 035206 (2019)

Dataset Culling: Towards Efficient Training Of Distillation-Based Domain Specific Models

Authors: Kentaro Yoshioka, Edward Lee, Simon Wong, Mark Horowitz

Abstract: Real-time CNN-based object detection models for applications like surveillance can achieve high accuracy but are computationally expensive. Recent works have shown 10 to 100x reduction in computation cost for inference by using domain-specific networks. However, prior works have focused on inference only. If the domain model requires frequent retraining, training costs can pose a significant bottl… ▽ More Real-time CNN-based object detection models for applications like surveillance can achieve high accuracy but are computationally expensive. Recent works have shown 10 to 100x reduction in computation cost for inference by using domain-specific networks. However, prior works have focused on inference only. If the domain model requires frequent retraining, training costs can pose a significant bottleneck. To address this, we propose Dataset Culling: a pipeline to reduce the size of the dataset for training, based on the prediction difficulty. Images that are easy to classify are filtered out since they contribute little to improving the accuracy. The difficulty is measured using our proposed confidence loss metric with little computational overhead. Dataset Culling is extended to optimize the image resolution to further improve training and inference costs. We develop fixed-angle, long-duration video datasets across several domains, and we show that the dataset size can be culled by a factor of 300x to reduce the total training time by 47x with no accuracy loss or even with slight improvement. Codes are available: https://github.com/kentaroy47/DatasetCulling △ Less

Submitted 16 May, 2019; v1 submitted 31 January, 2019; originally announced February 2019.

Comments: accepted to IEEE ICIP 2019. 5 pages

MMP Via Wall-crossing for Moduli Spaces of Stable Sheaves on an Enriques surface

Authors: Howard Nuer, Kōta Yoshioka

Abstract: We use wall-crossing in the Bridgeland stability manifold to systematically study the birational geometry of the moduli space $M_σ(\mathbf{v})$ of $σ$-semistable objects of class $\mathbf{v}$ for a generic stability condition $σ$ on an arbitrary Enriques surface $X$. In particular, we show that for any other generic stability condition $τ$, the two moduli spaces $M_τ(\mathbf{v})$ and… ▽ More We use wall-crossing in the Bridgeland stability manifold to systematically study the birational geometry of the moduli space $M_σ(\mathbf{v})$ of $σ$-semistable objects of class $\mathbf{v}$ for a generic stability condition $σ$ on an arbitrary Enriques surface $X$. In particular, we show that for any other generic stability condition $τ$, the two moduli spaces $M_τ(\mathbf{v})$ and $M_σ(\mathbf{v})$ are birational. As a consequence, we show that for primitive $\mathbf{v}$ of odd rank $M_σ(\mathbf{v})$ is birational to a Hilbert scheme of points. Similarly, in even rank we show that $M_σ(\mathbf{v})$ is birational to a moduli space of torsion sheaves supported on a hyperelliptic curve when $\ell(\mathbf{v})=1$. As an added bonus of our work, we prove that the Donaldson-Mukai map $θ_{\mathbf{v},σ}:\mathbf{v}^\perp\to\mathrm{Pic}(M_σ(\mathbf{v}))$ is an isomorphism for these classes. Finally, we use our classification to fully describe the geometry of the only two examples of moduli of stable sheaves on $X$ that are uniruled (and thus not K-trivial). △ Less

Submitted 13 January, 2019; originally announced January 2019.

Comments: 84 pages, 3 figures, Comments Welcome. arXiv admin note: text overlap with arXiv:1301.6968 by other authors

MSC Class: 14D20 (primary); 14E30;

Training Domain Specific Models for Energy-Efficient Object Detection

Authors: Kentaro Yoshioka, Edward Lee, Mark Horowitz

Abstract: We propose an end-to-end framework for training domain specific models (DSMs) to obtain both high accuracy and computational efficiency for object detection tasks. DSMs are trained with distillation \cite{hinton2015distilling} and focus on achieving high accuracy at a limited domain (e.g. fixed view of an intersection). We argue that DSMs can capture essential features well even with a small model… ▽ More We propose an end-to-end framework for training domain specific models (DSMs) to obtain both high accuracy and computational efficiency for object detection tasks. DSMs are trained with distillation \cite{hinton2015distilling} and focus on achieving high accuracy at a limited domain (e.g. fixed view of an intersection). We argue that DSMs can capture essential features well even with a small model size, enabling higher accuracy and efficiency than traditional techniques. In addition, we improve the training efficiency by reducing the dataset size by culling easy to classify images from the training set. For the limited domain, we observed that compact DSMs significantly surpass the accuracy of COCO trained models of the same size. By training on a compact dataset, we show that with an accuracy drop of only 3.6\%, the training time can be reduced by 93\%. The codes are uploaded in https://github.com/kentaroy47/training-domain-specific-models. △ Less

Submitted 18 November, 2018; v1 submitted 6 November, 2018; originally announced November 2018.

Updated Inflight Calibration of Hayabusa2's Optical Navigation Camera (ONC) for Scientific Observations during the Cruise Phase

Authors: Eri Tatsumi, Toru Kouyama, Hidehiko Suzuki, Manabu Yamada, Naoya Sakatani, Shingo Kameda, Yasuhiro Yokota, Rie Honda, Tomokatsu Morota, Keiichi Moroi, Naoya Tanabe, Hiroaki Kamiyoshihara, Marika Ishida, Kazuo Yoshioka, Hiroyuki Sato, Chikatoshi Honda, Masahiko Hayakawa, Kohei Kitazato, Hirotaka Sawada, Seiji Sugita

Abstract: The Optical Navigation Camera (ONC-T, ONC-W1, ONC-W2) onboard Hayabusa2 are also being used for scientific observations of the mission target, C-complex asteroid 162173 Ryugu. Science observations and analyses require rigorous instrument calibration. In order to meet this requirement, we have conducted extensive inflight observations during the 3.5 years of cruise after the launch of Hayabusa2 on… ▽ More The Optical Navigation Camera (ONC-T, ONC-W1, ONC-W2) onboard Hayabusa2 are also being used for scientific observations of the mission target, C-complex asteroid 162173 Ryugu. Science observations and analyses require rigorous instrument calibration. In order to meet this requirement, we have conducted extensive inflight observations during the 3.5 years of cruise after the launch of Hayabusa2 on 3 December 2014. In addition to the first inflight calibrations by Suzuki et al. (2018), we conducted an additional series of calibrations, including read-out smear, electronic-interference noise, bias, dark current, hot pixels, sensitivity, linearity, flat-field, and stray light measurements for the ONC. Moreover, the calibrations, especially flat-fields and sensitivities, of ONC-W1 and -W2 are updated for the analysis of the low-altitude (i.e., high-resolution) observations, such as the gravity measurement, touchdowns, and the descents for MASCOT and MINERVA-II payload releases. The radiometric calibration for ONC-T is also updated in this study based on star and Moon observations. Our updated inflight sensitivity measurements suggest the accuracy of the absolute radiometric calibration contains less than 1.8% error for the ul-, b-, v-, Na-, w-, and x-bands based on star calibration observations and ~5% for the p-band based on lunar calibration observations. The radiance spectra of the Moon, Jupiter, and Saturn from the ONC-T show good agreement with the spacecraft-based observations of the Moon from SP/SELENE and WAC/LROC and with ground-based telescopic observations for Jupiter and Saturn. △ Less

Submitted 25 October, 2018; originally announced October 2018.

Comments: Submitted to Icarus

Dynamical Critical Behavior of an Attractive Bose-Einstein Condensate Phase Transition

Authors: Yiping Chen, Munekazu Horikoshi, Kosuke Yoshioka, Makoto Kuwata-Gonokami

Abstract: When matter undergoes a continuous phase transition on a finite timescale, the Kibble-Zurek mechanism predicts universal scaling behavior with respect to structure formation. The scaling is dependent on the universality class and is irrelevant to the details of the system. Here, we examine this phenomenon by controlling the timescale of the phase transition to a Bose-Einstein condensate using symp… ▽ More When matter undergoes a continuous phase transition on a finite timescale, the Kibble-Zurek mechanism predicts universal scaling behavior with respect to structure formation. The scaling is dependent on the universality class and is irrelevant to the details of the system. Here, we examine this phenomenon by controlling the timescale of the phase transition to a Bose-Einstein condensate using sympathetic cooling of a ultracold Bose thermal could with tunable interactions in an elongated trap. The phase transition results in a diverse number of bright solitons and grey solitons in the condensate that undergo attractive and repulsive interactions, respectively. The power law dependence of the average soliton number on the timescale of the phase transition is measured for each interaction and compared. The results support the Kibble-Zurek mechanism, in that the scaling behavior is determined by universality and does not rely on the interaction properties. △ Less

Submitted 6 February, 2019; v1 submitted 13 September, 2018; originally announced September 2018.

Comments: 14 pages, 3 figures

Journal ref: Phys. Rev. Lett. 122, 040406 (2019)

PhaseMAC: A 14 TOPS/W 8bit GRO based Phase Domain MAC Circuit for In-Sensor-Computed Deep Learning Accelerators

Authors: Kentaro Yoshioka, Yosuke Toyama, Koichiro Ban, Daisuke Yashima, Shigeru Maya, Akihide Sai, Kohei Onizuka

Abstract: PhaseMAC (PMAC), a phase domain Gated-Ring-Oscillator (GRO) based 8bit MAC circuit, is proposed to minimize both area and power consumption of deep learning accelerators. PMAC composes of only digital cells and consumes significantly smaller power than standard digital designs, owing to its efficient analog accumulation nature. It occupies 26.6 times smaller area than conventional analog designs,… ▽ More PhaseMAC (PMAC), a phase domain Gated-Ring-Oscillator (GRO) based 8bit MAC circuit, is proposed to minimize both area and power consumption of deep learning accelerators. PMAC composes of only digital cells and consumes significantly smaller power than standard digital designs, owing to its efficient analog accumulation nature. It occupies 26.6 times smaller area than conventional analog designs, which is competitive to digital MAC circuits. PMAC achieves a peak efficiency of 14 TOPS/W, which is best reported and 48% higher than conventional arts. Results in anomaly detection tasks are demonstrated, which is the hottest application in the industrial IoT scene. △ Less

Submitted 23 August, 2018; originally announced August 2018.

Comments: Presented at Symp. VLSI 2018

Direct Phase Locking of a Ti:Sapphire Optical Frequency Comb to a Remote Optical Frequency Standard

Authors: Eunmi Chae, Kota Nakashima, Takuya Ikeda, Kei Sugiyama, Kosuke Yoshioka

Abstract: We report on an ultralow noise optical frequency transfer from a remotely located Sr optical lattice clock laser to a Ti:Sapphire optical frequency comb through telecom-wavelength optical fiber networks. The inherent narrow linewidth of the Ti:Sapphire optical frequency comb eliminates the need for a local reference high-finesse cavity. The relative fractional frequency instability of the optical… ▽ More We report on an ultralow noise optical frequency transfer from a remotely located Sr optical lattice clock laser to a Ti:Sapphire optical frequency comb through telecom-wavelength optical fiber networks. The inherent narrow linewidth of the Ti:Sapphire optical frequency comb eliminates the need for a local reference high-finesse cavity. The relative fractional frequency instability of the optical frequency comb with respect to the remote optical reference was $6.7(1) \times 10^{-18}$ at 1 s and $1.05(3) \times 10^{-19}$ at 1,000 s including a 2.9 km-long fiber network. This ensured the optical frequency comb had the same precision as the optical standard. Our result paves the way for ultrahigh-precision spectroscopy and conversion of the highly precise optical frequency to radio frequencies in a simpler setup. △ Less

Submitted 2 April, 2019; v1 submitted 19 July, 2018; originally announced July 2018.

Comments: 12 pages, 9 figures

Derived equivalent Hilbert schemes of points on K3 surfaces which are not birational

Authors: Ciaran Meachan, Giovanni Mongardi, Kota Yoshioka

Abstract: We provide a criterion for when Hilbert schemes of points on K3 surfaces are birational. In particular, this allows us to generate a plethora of examples of non-birational Hilbert schemes which are derived equivalent. We provide a criterion for when Hilbert schemes of points on K3 surfaces are birational. In particular, this allows us to generate a plethora of examples of non-birational Hilbert schemes which are derived equivalent. △ Less

Submitted 28 February, 2019; v1 submitted 1 February, 2018; originally announced February 2018.

Comments: Final version, to appear in Math. Zeit

The OVAL experiment: A new experiment to measure vacuum magnetic birefringence using high repetition pulsed magnets

Authors: Xing Fan, Shusei Kamioka, Toshiaki Inada, Takayuki Yamazaki, Toshio Namba, Shoji Asai, Junko Omachi, Kosuke Yoshioka, Makoto Kuwata-Gonokami, Akira Matsuo, Koushi Kawaguchi, Koichi Kindo, Hiroyuki Nojiri

Abstract: A new experiment to measure vacuum magnetic birefringence (VMB), the OVAL experiment, is reported. We developed an original pulsed magnet that has a high repetition rate and applies the strongest magnetic field among VMB experiments. The vibration isolation design and feedback system enable the direct combination of the magnet with a Fabry-Pérot cavity. To ensure the searching potential, a calibra… ▽ More A new experiment to measure vacuum magnetic birefringence (VMB), the OVAL experiment, is reported. We developed an original pulsed magnet that has a high repetition rate and applies the strongest magnetic field among VMB experiments. The vibration isolation design and feedback system enable the direct combination of the magnet with a Fabry-Pérot cavity. To ensure the searching potential, a calibration measurement with dilute nitrogen gas and a prototype search for vacuum magnetic birefringence are performed. Based on the results, a strategy to observe vacuum magnetic birefringence is reported. △ Less

Submitted 19 May, 2017; v1 submitted 1 May, 2017; originally announced May 2017.

Comments: 9 pages, 11 figures

Categorical entropy for Fourier-Mukai transforms on generic abelian surfaces

Authors: Kota Yoshioka

Abstract: In this note, we shall compute the categorical entropy of an autoequivalence on a generic abelian surface. In this note, we shall compute the categorical entropy of an autoequivalence on a generic abelian surface. △ Less

Submitted 15 January, 2017; originally announced January 2017.

Comments: 9 pages

Some remarks on Bridgeland stability conditions on K3 and Enriques surfaces

Authors: Kota Yoshioka

Abstract: We give some remarks on our papers with Minamide and Yanagida on Bridgeland stability conditions. We also give a remark on stability conditions on Enriques surfaces, and give another proof of the projectivity of the coarse moduli spaces of semi-stable objects, which were obtained by Nuer. We give some remarks on our papers with Minamide and Yanagida on Bridgeland stability conditions. We also give a remark on stability conditions on Enriques surfaces, and give another proof of the projectivity of the coarse moduli spaces of semi-stable objects, which were obtained by Nuer. △ Less

Submitted 17 July, 2016; originally announced July 2016.

Comments: 17 pages

Superspace Gauge Fixing in Yang-Mills Matter Coupled Conformal Supergravity

Authors: Taichiro Kugo, Ryo Yokokura, Koichi Yoshioka

Abstract: In $D=4$, $\cal{N}=1$ conformal superspace, the Yang-Mills matter coupled supergravity system is constructed where the Yang-Mills gauge interaction is introduced by extending the superconformal group to include the Kähler isometry group of chiral matter fields. There are two gauge-fixing procedures to get to the component Poincaré supergravity: one via the superconformal component formalism and th… ▽ More In $D=4$, $\cal{N}=1$ conformal superspace, the Yang-Mills matter coupled supergravity system is constructed where the Yang-Mills gauge interaction is introduced by extending the superconformal group to include the Kähler isometry group of chiral matter fields. There are two gauge-fixing procedures to get to the component Poincaré supergravity: one via the superconformal component formalism and the other via the Poincaré superspace formalism. These two types of superconformal gauge-fixing conditions are analyzed in detail and their correspondence is clarified. △ Less

Submitted 21 June, 2016; originally announced June 2016.

Comments: 20 pages, 2 figures

Journal ref: PTEP 2016 (2016) no.9, 093B03

Higgs Boson Mass and Muon g-2 with Strongly Coupled Vector-like Generations

Authors: Michinobu Nishida, Koichi Yoshioka

Abstract: We study the Higgs boson mass and the muon anomalous magnetic moment (the muon $g-2$) in a supersymmetric standard model with vector-like generations. The infrared physics of the model is governed by strong renormalization-group effects of the gauge couplings. That leads to sizable extra Yukawa couplings of Higgs doublets between the second and vector-like generations in both quark and lepton sect… ▽ More We study the Higgs boson mass and the muon anomalous magnetic moment (the muon $g-2$) in a supersymmetric standard model with vector-like generations. The infrared physics of the model is governed by strong renormalization-group effects of the gauge couplings. That leads to sizable extra Yukawa couplings of Higgs doublets between the second and vector-like generations in both quark and lepton sectors. It is found with this property that there exist wide parameter regions where the Higgs boson mass and the muon $g-2$ are simultaneously explained. △ Less

Submitted 21 May, 2016; originally announced May 2016.

Comments: 32 pages, 8 figures, 3 tables

Journal ref: Phys. Rev. D 94, 095022 (2016)

A note on stable sheaves on Enriques surfaces II

Authors: Kota Yoshioka

Abstract: We shall study a necessary and sufficient condition for the existence of stable sheaves on arbitrary Enriques surfaces. We shall study a necessary and sufficient condition for the existence of stable sheaves on arbitrary Enriques surfaces. △ Less

Submitted 10 May, 2016; originally announced May 2016.

Comments: 6 pages

Moduli spaces of stable sheaves on Enriques surfaces

Authors: Kota Yoshioka

Abstract: We shall study the existence condition of slope stable sheaves on Enriques surfaces. We also gives a different proof of the irreducibility of the moduli spaces of rank 2 stable sheaves. We shall study the existence condition of slope stable sheaves on Enriques surfaces. We also gives a different proof of the irreducibility of the moduli spaces of rank 2 stable sheaves. △ Less

Submitted 8 April, 2016; v1 submitted 22 February, 2016; originally announced February 2016.

Comments: 23 pages, readability is improved

Journal ref: Kyoto J. Math. 58, no. 4 (2018), 865-914

Component versus Superspace Approaches to D=4, N=1 Conformal Supergravity

Authors: Taichiro Kugo, Ryo Yokokura, Koichi Yoshioka

Abstract: The superspace formulation of N=1 conformal supergravity in four dimensions is demonstrated to be equivalent to the conventional component field approach based on the superconformal tensor calculus. The detailed correspondence between two approaches is explicitly given for various quantities; superconformal gauge fields, curvatures and curvature constraints, general conformal multiplets and their… ▽ More The superspace formulation of N=1 conformal supergravity in four dimensions is demonstrated to be equivalent to the conventional component field approach based on the superconformal tensor calculus. The detailed correspondence between two approaches is explicitly given for various quantities; superconformal gauge fields, curvatures and curvature constraints, general conformal multiplets and their transformation laws, and so on. In particular, we carefully analyze the curvature constraints leading to the superconformal algebra and also the superconformal gauge fixing leading to Poincare supergravity since they look rather different between two approaches. △ Less

Submitted 2 April, 2016; v1 submitted 14 February, 2016; originally announced February 2016.

Comments: 39 pages

Journal ref: PTEP 2016 (2016) no.7, 073B07

Study on Cooling of Positronium for Bose-Einstein Condensation

Authors: Kenji Shu, Xing Fan, Takayuki Yamazaki, Toshio Namba, Shoji Asai, Kosuke Yoshioka, Makoto Kuwata-Gonokami

Abstract: A new method of cooling positronium down is proposed to realize Bose-Einstein condensation of positronium. We perform detail studies about three processes (1) thermalization processes between positronium and silica walls of a cavity, (2) Ps-Ps scatterings and (3) Laser cooling. The thermalization process is shown to be not sufficient for BEC. Ps-Ps collision is also shown to make a big effect on t… ▽ More A new method of cooling positronium down is proposed to realize Bose-Einstein condensation of positronium. We perform detail studies about three processes (1) thermalization processes between positronium and silica walls of a cavity, (2) Ps-Ps scatterings and (3) Laser cooling. The thermalization process is shown to be not sufficient for BEC. Ps-Ps collision is also shown to make a big effect on the cooling performance. We combine both methods and establish an efficient cooling for BEC. We also propose a new optical laser system for the cooling. △ Less

Submitted 16 February, 2016; v1 submitted 24 November, 2015; originally announced November 2015.

Momentum-dependent sign-inversion of orbital polarization in superconducting FeSe

Authors: Y. Suzuki, T. Shimojima, T. Sonobe, A. Nakamura, M. Sakano, H. Tsuji, J. Omachi, K. Yoshioka, M. Kuwata-Gonokami, T. Watashige, R. Kobayashi, S. Kasahara, T. Shibauchi, Y. Matsuda, Y. Yamakawa, H. Kontani, K. Ishizaka

Abstract: We investigate the electronic reconstruction across the tetragonal-orthorhombic structural transition in FeSe by employing polarization-dependent angle-resolved photoemission spectroscopy (ARPES) on detwinned single crystals. Across the structural transition, the electronic structures around the G and M points are modified from four-fold to two-fold symmetry due to the lifting of degeneracy in dxz… ▽ More We investigate the electronic reconstruction across the tetragonal-orthorhombic structural transition in FeSe by employing polarization-dependent angle-resolved photoemission spectroscopy (ARPES) on detwinned single crystals. Across the structural transition, the electronic structures around the G and M points are modified from four-fold to two-fold symmetry due to the lifting of degeneracy in dxz/dyz orbitals. The dxz band shifts upward at the G point while it moves downward at the M point, suggesting that the electronic structure of orthorhombic FeSe is characterized by a momentum-dependent sign-changing orbital polarization. The elongated directions of the elliptical Fermi surfaces (FSs) at the G and M points are rotated by 90 degrees with respect to each other, which may be related to the absence of the antiferromagnetic order in FeSe. △ Less

Submitted 4 April, 2015; originally announced April 2015.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. B 92, 205117 (2015)

Wall crossing of the moduli spaces of perverse coherent sheaves on a blow-up

Authors: Kota Yoshioka

Abstract: We give a remark on the wall crossing behavior of perverse coherent sheaves on a blow-up and stability condition constructed by Toda. We also explain the wall crossing of twisted stability in terms of stability condition. We give a remark on the wall crossing behavior of perverse coherent sheaves on a blow-up and stability condition constructed by Toda. We also explain the wall crossing of twisted stability in terms of stability condition. △ Less

Submitted 23 September, 2015; v1 submitted 18 November, 2014; originally announced November 2014.

Comments: 24 pages, minor change

A note on stable sheaves on Enriques surfaces

Authors: Kota Yoshioka

Abstract: We give a different proof of Nuer's result on the exsistence of stable sheaves on Enriques surfaces. We give a different proof of Nuer's result on the exsistence of stable sheaves on Enriques surfaces. △ Less

Submitted 1 December, 2015; v1 submitted 7 October, 2014; originally announced October 2014.

Comments: 9 pages

Lifting of xz/yz orbital degeneracy at the structural transition in detwinned FeSe

Authors: T. Shimojima, Y. Suzuki, T. Sonobe, A. Nakamura, M. Sakano, J. Omachi, K. Yoshioka, M. Kuwata-Gonokami, K. Ono, H. Kumigashira, A. E. Böhmer, F. Hardy, T. Wolf, C. Meingast, H. v. Löhneysen, H. Ikeda, K. Ishizaka

Abstract: We study superconducting FeSe (Tc = 9 K) exhibiting the tetragonal-orthorhombic structural transition (Ts = 90 K) without any antiferromagnetic ordering, by utilizing angle-resolved photoemission spectroscopy. In the detwinned orthorhombic state, the energy position of the dyz orbital band at the Brillouin zone corner is 50 meV higher than that of dxz, indicating the orbital order similar to NaFeA… ▽ More We study superconducting FeSe (Tc = 9 K) exhibiting the tetragonal-orthorhombic structural transition (Ts = 90 K) without any antiferromagnetic ordering, by utilizing angle-resolved photoemission spectroscopy. In the detwinned orthorhombic state, the energy position of the dyz orbital band at the Brillouin zone corner is 50 meV higher than that of dxz, indicating the orbital order similar to NaFeAs and BaFe2As2 families. Evidence of orbital order also appears in the hole bands at the Brillouin zone center. Precisely measured temperature dependence using strain-free samples shows that the onset of the orbital ordering (To) occurs very close to Ts, thus suggesting that the electronic nematicity above Ts is considerably weaker in FeSe compared to BaFe2As2 family. △ Less

Submitted 5 July, 2014; originally announced July 2014.

Comments: 6 pages, 4 figures

Journal ref: Physical Review B 90, 121111(R) (2014)

On the strange duality conjecture for abelian surfaces II

Authors: Barbara Bolognese, Alina Marian, Dragos Oprea, Kota Yoshioka

Abstract: In the prequel to this paper, two versions of Le Potier's strange duality conjecture for sheaves over abelian surfaces were studied. A third version is considered here. In the current setup, the isomorphism involves moduli spaces of sheaves with fixed determinant and fixed determinant of the Fourier-Mukai transform on one side, and moduli spaces where both determinants vary, on the other side. We… ▽ More In the prequel to this paper, two versions of Le Potier's strange duality conjecture for sheaves over abelian surfaces were studied. A third version is considered here. In the current setup, the isomorphism involves moduli spaces of sheaves with fixed determinant and fixed determinant of the Fourier-Mukai transform on one side, and moduli spaces where both determinants vary, on the other side. We first establish the isomorphism in rank one using the representation theory of Heisenberg groups. For product abelian surfaces, the isomorphism is then shown to hold for sheaves with fiber degree 1 via Fourier-Mukai techniques. By degeneration to product geometries, the duality is obtained generically for a large number of numerical types. Finally, it is shown in great generality that the Verlinde sheaves encoding the variation of the spaces of theta functions are locally free over moduli. △ Less

Submitted 26 February, 2014; originally announced February 2014.

A proof of the Kawamata-Morrison Cone Conjecture for holomorphic symplectic varieties of K3^[n] or generalized Kummer deformation type

Authors: Eyal Markman, Kota Yoshioka

Abstract: We prove a version of the Kawamata-Morrison ample cone conjecture for projective irreducible holomorphic symplectic manifolds deformation equivalent to either the Hilbert scheme of n points on a K3 surface, or a generalized Kummer variety. We prove a version of the Kawamata-Morrison ample cone conjecture for projective irreducible holomorphic symplectic manifolds deformation equivalent to either the Hilbert scheme of n points on a K3 surface, or a generalized Kummer variety. △ Less

Submitted 10 February, 2014; originally announced February 2014.

Comments: 9 pages

Journal ref: Int. Math. Res. Not. IMRN(2015), no. 24, 13563-13574

Runaway, D term and R-symmetry Breaking

Authors: Tatsuo Azeyanagi, Tatsuo Kobayashi, Atsushi Ogasahara, Koichi Yoshioka

Abstract: We study the D-term effect on runaway directions of the F-term scalar potential. A minimal renormalizable model is presented where supersymmetry is broken without any pseudomoduli. The model is applied to the hidden sector of gauge mediation for spontaneously breaking R symmetry and generating nonvanishing gaugino masses at the one-loop order. We study the D-term effect on runaway directions of the F-term scalar potential. A minimal renormalizable model is presented where supersymmetry is broken without any pseudomoduli. The model is applied to the hidden sector of gauge mediation for spontaneously breaking R symmetry and generating nonvanishing gaugino masses at the one-loop order. △ Less

Submitted 27 November, 2012; v1 submitted 3 August, 2012; originally announced August 2012.

Comments: 16 pages, 2 figures, version to appear in PRD

Report number: KUNS-2408

Journal ref: Phys. Rev. D 86, 095026 (2012)

Bridgeland's stability and the positive cone of the moduli spaces of stable objects on an abelian surface

Authors: Kota Yoshioka

Abstract: We shall study the chamber structure of positive cone of the albanese fiber of the moduli spaces of stable objects on an abelian surfaces via the chamber structure of stability conditions. We shall study the chamber structure of positive cone of the albanese fiber of the moduli spaces of stable objects on an abelian surfaces via the chamber structure of stability conditions. △ Less

Submitted 13 November, 2014; v1 submitted 21 June, 2012; originally announced June 2012.

Comments: 37 pages, Appendix is added and exposition is improved

Bridgeland's stabilities on abelian surfaces

Authors: Shintarou Yanagida, Kota Yoshioka

Abstract: In this paper, we shall study the structure of walls for Bridgeland's stability conditions on abelian surfaces. In particular, we shall study the structure of walls for the moduli spaces of rank 1 complexes on an abelian surface with the Picard number 1. In this paper, we shall study the structure of walls for Bridgeland's stability conditions on abelian surfaces. In particular, we shall study the structure of walls for the moduli spaces of rank 1 complexes on an abelian surface with the Picard number 1. △ Less

Submitted 5 March, 2012; originally announced March 2012.

Comments: 24 pages

Some moduli spaces of Bridgeland's stability conditions

Authors: Hiroki Minamide, Shintarou Yanagida, Kota Yoshioka

Abstract: We shall study some moduli spaces of Bridgeland's semi-stable objects on abelian surfaces and K3 surfaces with Picard number 1. Under some conditions, we show that the moduli spaces are isomorphic to the moduli spaces of Gieseker semi-stable sheaves. We also study the ample cone of the moduli spaces. We shall study some moduli spaces of Bridgeland's semi-stable objects on abelian surfaces and K3 surfaces with Picard number 1. Under some conditions, we show that the moduli spaces are isomorphic to the moduli spaces of Gieseker semi-stable sheaves. We also study the ample cone of the moduli spaces. △ Less

Submitted 27 December, 2011; v1 submitted 26 November, 2011; originally announced November 2011.

Comments: 25 pages, the appendix is expanded, sect. 4.2 is modified

Fourier-Mukai transforms and the wall-crossing behavior for Bridgeland's stability conditions

Authors: Hiroki Minamide, Shintarou Yanagida, Kota Yoshioka

Abstract: Bridgeland stability condition is preserved under the Fourier-Mukai transform by its definition. We explain the relation with Gieseker stability. By studying the wall-crossing behavior, we reprove that the moduli spaces of stable sheaves on abelian surfaces are birationally equivalent, if the associated Mukai vectors are related by isometries of the Mukai lattice. Bridgeland stability condition is preserved under the Fourier-Mukai transform by its definition. We explain the relation with Gieseker stability. By studying the wall-crossing behavior, we reprove that the moduli spaces of stable sheaves on abelian surfaces are birationally equivalent, if the associated Mukai vectors are related by isometries of the Mukai lattice. △ Less

Submitted 26 November, 2012; v1 submitted 26 June, 2011; originally announced June 2011.

Comments: 48 pages

D term and gaugino masses in gauge mediation

Authors: Tatsuo Azeyanagi, Tatsuo Kobayashi, Atsushi Ogasahara, Koichi Yoshioka

Abstract: We systematically study supersymmetry breaking with non-vanishing F and D terms. We classify the models into two categories and find that a certain class of models necessarily has runaway behavior of scalar potential, while the other needs the Fayet-Iliopoulos term to break supersymmetry. The latter class is useful to have a simple model of gauge mediation where the vacuum is stable everywhere and… ▽ More We systematically study supersymmetry breaking with non-vanishing F and D terms. We classify the models into two categories and find that a certain class of models necessarily has runaway behavior of scalar potential, while the other needs the Fayet-Iliopoulos term to break supersymmetry. The latter class is useful to have a simple model of gauge mediation where the vacuum is stable everywhere and the gaugino mass is generated at the one-loop order. △ Less

Submitted 10 July, 2011; v1 submitted 15 June, 2011; originally announced June 2011.

Comments: 18 pages, 2 figures

Report number: KUNS-2344, RIKEN-MP-23

Universally Leptophilic Dark Matter From Non-Abelian Discrete Symmetry

Authors: Naoyuki Haba, Yuji Kajiyama, Shigeki Matsumoto, Hiroshi Okada, Koichi Yoshioka

Abstract: The positron anomaly recently reported by the cosmic-ray measurements can be explained by the decaying dark matter scenario, where it decays mainly into leptons with the lifetime of O(10^26) second. When the dark matter is a fermionic particle, the lifetime of this order is known to be obtained by a dimension 6 operator suppressed by the unification scale 10^16 GeV, while such decay operators do n… ▽ More The positron anomaly recently reported by the cosmic-ray measurements can be explained by the decaying dark matter scenario, where it decays mainly into leptons with the lifetime of O(10^26) second. When the dark matter is a fermionic particle, the lifetime of this order is known to be obtained by a dimension 6 operator suppressed by the unification scale 10^16 GeV, while such decay operators do not necessarily involve only leptons. In addition, the scenario would be spoiled if there exist lower-dimensional operators inducing the dark matter decay. We show in this letter that a single non-Abelian discrete symmetry such as A_4 is possible to prohibit all such harmful (non-leptonically coupled and lower-dimensional) operators. Moreover, the dark matter decays into charged leptons in a flavor-blind fashion due to the non-Abelian flavor symmetry, which results in perfect agreements not only with the PAMELA data but also with the latest Fermi-LAT data reported very recently. We also discuss some relevance between the discrete symmetry and neutrino physics. △ Less

Submitted 27 August, 2010; originally announced August 2010.

Comments: 13 pages, 2 tables, 1 figure

Report number: UT-HET 046, KUNS-2292

Journal ref: Phys.Lett.B695:476-481,2011

Transition to a Bose-Einstein condensate of excitons at sub-Kelvin temperatures

Authors: Kosuke Yoshioka, Eunmi Chae, Makoto Kuwata-Gonokami

Abstract: Bose-Einstein condensation (BEC) is a quantum mechanical phenomenon directly linked to the quantum statistics of bosons. While cold atomic gases provide a new arena for exploring the nature of BEC, a long-term quest to confirm BEC of excitons, quasi-Bose particles formed as a bound state of an electron-hole pair, has been underway since its theoretical prediction in the 1960s. Ensembles of electro… ▽ More Bose-Einstein condensation (BEC) is a quantum mechanical phenomenon directly linked to the quantum statistics of bosons. While cold atomic gases provide a new arena for exploring the nature of BEC, a long-term quest to confirm BEC of excitons, quasi-Bose particles formed as a bound state of an electron-hole pair, has been underway since its theoretical prediction in the 1960s. Ensembles of electrons and holes are complex quantum systems with strong Coulomb correlations; thus, it is non-trivial whether nature chooses a form of exciton BEC. Various systems have been examined in bulk and two-dimensional semiconductors and also exciton-photon hybrid systems. Among them, the 1s paraexciton state in a single crystal of Cu2O has been a prime candidate for realizing three-dimensional BEC. The large binding energy and long lifetime enable preparation of cold excitons in thermal equilibrium with the lattice and decoupled from the radiation field. However, collisional loss severely limits the conditions for reaching BEC. Such a system with a large inelastic cross section is excluded in atomic BEC experiments, where a small inelastic scattering rate and efficient elastic scattering are necessary for evaporative cooling. Here we demonstrate that it is nevertheless possible to achieve BEC by cooling paraexcitons to sub-Kelvin temperatures in a cold phonon bath. Emission spectra from paraexcitons in a three-dimensional trap show an anomalous distribution in a threshold-like manner at the critical number of BEC expected for ideal bosons. Bosonic stimulated scattering into the condensate and collisional loss compete and limit the condensate to a fraction of about 1%. This observation adds a new class of experimentally accessible BEC for exploring a rich variety of matter phases of electron-hole ensembles. △ Less

Submitted 6 February, 2011; v1 submitted 14 August, 2010; originally announced August 2010.

Comments: 19 pages, 3 figures, Supplementary Information (12 pages, 4 figures) included

Journal ref: Nat. Commun. 2:328 (2011)

Extra dimensions and Seesaw Neutrinos at the International Linear Collider

Authors: Tomoyuki Saito, Masaki Asano, Keisuke Fujii, Naoyuki Haba, Shigeki Matsumoto, Takehiro Nabeshima, Yosuke Takubo, Hitoshi Yamamoto, Koichi Yoshioka

Abstract: We study the capability of the international linear collider (ILC) to probe extra dimensions via the seesaw mechanism. In the scenario we study, heavy Kaluza-Klein neutrinos generate tiny neutrino masses and, at the same time, have sizable couplings to the standard-model particles. Consequently, a Kaluza-Klein tower of heavy neutrinos (N) can be produced and studied at the ILC through the process:… ▽ More We study the capability of the international linear collider (ILC) to probe extra dimensions via the seesaw mechanism. In the scenario we study, heavy Kaluza-Klein neutrinos generate tiny neutrino masses and, at the same time, have sizable couplings to the standard-model particles. Consequently, a Kaluza-Klein tower of heavy neutrinos (N) can be produced and studied at the ILC through the process: e+e- -> vN followed by N -> Wl decay. We show that the single lepton plus two-jets final states with large missing energy from this signal process will provide a good opportunity to measure the masses and cross sections of Kaluza-Klein neutrinos up to the third level. Furthermore, the neutrino oscillation parameters can be extracted from the flavor dependence of the lowest-mode signals, which give us information about the origin of low-energy neutrino masses. △ Less

Submitted 26 November, 2010; v1 submitted 13 August, 2010; originally announced August 2010.

Comments: 22 pages, 5 figures, 7 tables

Journal ref: Phys.Rev.D82:093004,2010

Seesaw in the bulk

Authors: Atsushi Watanabe, Koichi Yoshioka

Abstract: A five-dimensional seesaw framework is analyzed with the lepton-number-violating propagator of bulk right-handed neutrinos. That can bypass summing up the effects of heavy Majorana particles whose masses and wavefunctions are not exactly known. The propagator method makes it easier to evaluate the seesaw-induced neutrino mass for various boundary conditions of bulk neutrinos and in a general backg… ▽ More A five-dimensional seesaw framework is analyzed with the lepton-number-violating propagator of bulk right-handed neutrinos. That can bypass summing up the effects of heavy Majorana particles whose masses and wavefunctions are not exactly known. The propagator method makes it easier to evaluate the seesaw-induced neutrino mass for various boundary conditions of bulk neutrinos and in a general background geometry, including the warped extra dimension. It is also found that the higher-dimensional seesaw gives a natural framework for the inverse seesaw suppression of low-energy neutrino masses. △ Less

Submitted 9 July, 2010; originally announced July 2010.

Comments: 25 pages

Report number: KUNS-2278

Journal ref: Prog.Theor.Phys.125:129-148,2011

Deep Correlation Between Cosmic-Ray Anomaly and Neutrino Masses

Authors: Shigeki Matsumoto, Koichi Yoshioka

Abstract: The positron anomaly recently reported by the cosmic-ray measurements suggests that, if explained by the decay of dark matter particle, the decay source is closely linked up with the leptonic sector of the standard model. It is observed that, with a simple dimensional analysis, the lifetime of dark matter for the anomaly is expressed by the energy scale of neutrino masses. We present two scenarios… ▽ More The positron anomaly recently reported by the cosmic-ray measurements suggests that, if explained by the decay of dark matter particle, the decay source is closely linked up with the leptonic sector of the standard model. It is observed that, with a simple dimensional analysis, the lifetime of dark matter for the anomaly is expressed by the energy scale of neutrino masses. We present two scenarios in which these two matter at issue (the dark matter width and the tiny neutrino masses) stem from a single operator involving a gauge-singlet scalar field. △ Less

Submitted 3 September, 2010; v1 submitted 8 June, 2010; originally announced June 2010.

Comments: 12 pages

Report number: UT-HET 040, KUNS-2271

Journal ref: Phys.Rev.D82:053009,2010

Scaling limit of d-inverse of Brownian motion with functional drift

Authors: Kouji Yano, Katsutoshi Yoshioka

Abstract: The d-inverse is a generalized notion of inverse of a stochastic process having a certain tendency of increasing expectations. Scaling limit of the d-inverse of Brownian motion with functional drift is studied. Except for degenerate case, the class of possible scaling limits is proved to consist of the d-inverses of Brownian motion without drift, one with explosion in finite time, and one with pow… ▽ More The d-inverse is a generalized notion of inverse of a stochastic process having a certain tendency of increasing expectations. Scaling limit of the d-inverse of Brownian motion with functional drift is studied. Except for degenerate case, the class of possible scaling limits is proved to consist of the d-inverses of Brownian motion without drift, one with explosion in finite time, and one with power drift. △ Less

Submitted 26 August, 2010; v1 submitted 2 June, 2010; originally announced June 2010.

Generic strange duality for $K3$ surfaces

Authors: Alina Marian, Dragos Oprea, Kota Yoshioka

Abstract: Strange duality is shown to hold over generic $K3$ surfaces in a large number of cases. The isomorphism for elliptic $K3$ surfaces is established first via Fourier-Mukai techniques. Applications to Brill-Noether theory for sheaves on $K3$s are also obtained. The appendix written by Kota Yoshioka discusses the behavior of the moduli spaces under change of polarization, as needed in the argument. Strange duality is shown to hold over generic $K3$ surfaces in a large number of cases. The isomorphism for elliptic $K3$ surfaces is established first via Fourier-Mukai techniques. Applications to Brill-Noether theory for sheaves on $K3$s are also obtained. The appendix written by Kota Yoshioka discusses the behavior of the moduli spaces under change of polarization, as needed in the argument. △ Less

Submitted 6 May, 2010; v1 submitted 1 May, 2010; originally announced May 2010.

Comments: Appendix is written by Kota Yoshioka

Journal ref: Duke Math. J. 162, no. 8 (2013), 1463-1501

Seesaw Neutrino Signals at the Large Hadron Collider

Authors: Shigeki Matsumoto, Takehiro Nabeshima, Koichi Yoshioka

Abstract: We discuss the scenario with gauge singlet fermions (right-handed neutrinos) accessible at the energy of the Large Hadron Collider. The singlet fermions generate tiny neutrino masses via the seesaw mechanism and also have sizable couplings to the standard-model particles. We demonstrate that these two facts, which are naively not satisfied simultaneously, are reconciled in the five-dimensional fra… ▽ More We discuss the scenario with gauge singlet fermions (right-handed neutrinos) accessible at the energy of the Large Hadron Collider. The singlet fermions generate tiny neutrino masses via the seesaw mechanism and also have sizable couplings to the standard-model particles. We demonstrate that these two facts, which are naively not satisfied simultaneously, are reconciled in the five-dimensional framework in various fashions, which make the seesaw mechanism observable. The collider signal of tri-lepton final states with transverse missing energy is investigated for two explicit examples of the observable seesaw, taking account of three types of neutrino mass spectrum and the constraint from lepton flavor violation. We find by showing the significance of signal discovery that the collider experiment has a potential to find signals of extra dimensions and the origin of small neutrino masses. △ Less

Submitted 14 June, 2010; v1 submitted 22 April, 2010; originally announced April 2010.

Comments: 27 pages, 4 figures

Report number: UT-HET 036, KUNS-2263

Journal ref: JHEP 1006:058,2010

Perverse coherent sheaves and Fourier-Mukai transforms on surfaces

Authors: Kota Yoshioka

Abstract: We study perverse coherent sheaves on the resolution of rational double points. As examples, we consider rational double points on 2-dimensional moduli spaces of stable sheaves on K3 and elliptic surfaces. Then we show that perverse coherent sheaves appears in the theory of Fourier-Mukai transforms. As an application, we generalize the Fourier-Mukai duality for K3 surfaces to our situation. We study perverse coherent sheaves on the resolution of rational double points. As examples, we consider rational double points on 2-dimensional moduli spaces of stable sheaves on K3 and elliptic surfaces. Then we show that perverse coherent sheaves appears in the theory of Fourier-Mukai transforms. As an application, we generalize the Fourier-Mukai duality for K3 surfaces to our situation. △ Less

Submitted 25 November, 2011; v1 submitted 12 March, 2010; originally announced March 2010.

Comments: 69 pages

Donaldson = Seiberg-Witten from Mochizuki's formula and instanton counting

Authors: Lothar Göttsche, Hiraku Nakajima, Kota Yoshioka

Abstract: We propose an explicit formula connecting Donaldson invariants and Seiberg-Witten invariants of a 4-manifold of simple type via Nekrasov's deformed partition function for the N=2 SUSY gauge theory with a single fundamental matter. This formula is derived from Mochizuki's formula, which makes sense and was proved when the 4-manifold is complex projective. Assuming our formula is true for a 4-mani… ▽ More We propose an explicit formula connecting Donaldson invariants and Seiberg-Witten invariants of a 4-manifold of simple type via Nekrasov's deformed partition function for the N=2 SUSY gauge theory with a single fundamental matter. This formula is derived from Mochizuki's formula, which makes sense and was proved when the 4-manifold is complex projective. Assuming our formula is true for a 4-manifold of simple type, we prove Witten's conjecture and sum rules for Seiberg-Witten invariants (superconformal simple type condition), conjectured by Mariño, Moore and Peradze. △ Less

Submitted 27 January, 2010; originally announced January 2010.

Comments: 43 pages

Journal ref: Publ.Res.Inst.Math.Sci.Kyoto 47:307-359,2011

Perverse coherent sheaves on blow-up. III. Blow-up formula from wall-crossing

Authors: Hiraku Nakajima, Kota Yoshioka

Abstract: In earlier papers arXiv:0802.3120, arXiv:0806.0463 of this series we constructed a sequence of intermediate moduli spaces $\bM^m(c)$ connecting a moduli space $M(c)$ of stable torsion free sheaves on a nonsingular complex projective surface and $\bM(c)$ on its one point blow-up. They are moduli spaces of perverse coherent sheaves on the blow-up. In this paper we study how Donaldson-type invari… ▽ More In earlier papers arXiv:0802.3120, arXiv:0806.0463 of this series we constructed a sequence of intermediate moduli spaces $\bM^m(c)$ connecting a moduli space $M(c)$ of stable torsion free sheaves on a nonsingular complex projective surface and $\bM(c)$ on its one point blow-up. They are moduli spaces of perverse coherent sheaves on the blow-up. In this paper we study how Donaldson-type invariants (integrals of cohomology classes given by universal sheaves) change from $\bM^m(c)$ to $\bM^{m+1}(c)$, and then from $M(c)$ to $\bM(c)$. As an application we prove that Nekrasov-type partition functions satisfy certain equations which determine invariants recursively in second Chern classes. They are generalization of the blow-up equation for the original Nekrasov deformed partition function for the pure N=2 SUSY gauge theory, found and used to derive the Seiberg-Witten curves in arXiv:math/0306198. △ Less

Submitted 15 April, 2010; v1 submitted 9 November, 2009; originally announced November 2009.

Comments: 62 pages; v2. Add a general blow-up formula; v3. Final version, accepted for a publication in Kyoto Journal of Mathematics

MSC Class: 14D21; 16G20

Journal ref: Kyoto J. Math. 51, no. 2 (2011), 263-335

Geometry-free neutrino masses in curved spacetime

Authors: Atsushi Watanabe, Koichi Yoshioka

Abstract: The seesaw-induced neutrino mass is discussed in a generic class of curved spacetime, including the flat and warped extra dimensions. For Majorana masses in the bulk and on the boundary, the exact forms of seesaw-induced masses are derived by using the Kaluza-Klein mode expansion and the lepton number violating correlator for bulk fermion. It is found that the neutrino mass is determined without… ▽ More The seesaw-induced neutrino mass is discussed in a generic class of curved spacetime, including the flat and warped extra dimensions. For Majorana masses in the bulk and on the boundary, the exact forms of seesaw-induced masses are derived by using the Kaluza-Klein mode expansion and the lepton number violating correlator for bulk fermion. It is found that the neutrino mass is determined without the knowledge of wave functions and whole background geometry when the metric factor is fixed on the boundary, e.g. by solving the hierarchy problem. △ Less

Submitted 5 October, 2009; originally announced October 2009.

Comments: 12 pages

Report number: KYUSHU-HET-122, KUNS-2233

Journal ref: Phys.Lett.B683:289-293,2010

Semi-homogeneous sheaves, Fourier-Mukai transforms and moduli of stable sheaves on abelian surfaces

Authors: Shintarou Yanagida, Kota Yoshioka

Abstract: This paper studies stable sheaves on abelian surfaces of Picard number one. Our main tools are semi-homogeneous sheaves and Fourier-Mukai transforms. We introduce the notion of semi-homogeneous presentation and investigate the behavior of stable sheaves under Fourier-Mukai transforms. As a consequence, an affirmative proof is given to the conjecture proposed by Mukai in the 1980s. This paper als… ▽ More This paper studies stable sheaves on abelian surfaces of Picard number one. Our main tools are semi-homogeneous sheaves and Fourier-Mukai transforms. We introduce the notion of semi-homogeneous presentation and investigate the behavior of stable sheaves under Fourier-Mukai transforms. As a consequence, an affirmative proof is given to the conjecture proposed by Mukai in the 1980s. This paper also includes an explicit description of the birational correspondence between the moduli spaces of stable sheaves and the Hilbert schemes. △ Less

Submitted 25 June, 2009; originally announced June 2009.

Comments: 50 pages

Observable Seesaw and its Collider Signatures

Authors: Naoyuki Haba, Shigeki Matsumoto, Koichi Yoshioka

Abstract: We discuss the scenario with TeV-scale right-handed neutrinos, which are accessible at future colliders, while holding down tiny seesaw-induced masses and sizable couplings to the standard-model particles. The signal with tri-lepton final states and large missing transverse energy is appropriate for studying collider signatures of the scenario with extra spatial dimensions. We show that the LHC… ▽ More We discuss the scenario with TeV-scale right-handed neutrinos, which are accessible at future colliders, while holding down tiny seesaw-induced masses and sizable couplings to the standard-model particles. The signal with tri-lepton final states and large missing transverse energy is appropriate for studying collider signatures of the scenario with extra spatial dimensions. We show that the LHC experiment generally has a potential to discover the signs of extra dimensions and the origin of small neutrino masses. △ Less

Submitted 28 January, 2009; originally announced January 2009.

Comments: 13 pages, 4 figures

Report number: OU-HET 622/2009, UT-HET 023, KUNS-2186

Journal ref: Phys.Lett.B677:291-295,2009

Flavor Symmetry Breaking and Vacuum Alignment on Orbifolds

Authors: Tatsuo Kobayashi, Yuji Omura, Koichi Yoshioka

Abstract: Flavor symmetry has been widely studied for figuring out the masses and mixing angles of standard-model fermions. In this paper we present a framework for handling flavor symmetry breaking where the symmetry breaking is triggered by boundary conditions of scalar fields in extra-dimensional space. The alignment of scalar expectation values is achieved without referring to any details of scalar po… ▽ More Flavor symmetry has been widely studied for figuring out the masses and mixing angles of standard-model fermions. In this paper we present a framework for handling flavor symmetry breaking where the symmetry breaking is triggered by boundary conditions of scalar fields in extra-dimensional space. The alignment of scalar expectation values is achieved without referring to any details of scalar potential and its minimization procedure. As applications to non-abelian discrete flavor symmetries, illustrative lepton mass models are constructed where the S3 and A4 flavor symmetries are broken down to the directions leading to the tri-bimaximal form of lepton mixing and realistic mass patterns. △ Less

Submitted 18 September, 2008; originally announced September 2008.

Comments: 21 pages

Journal ref: Phys.Rev.D78:115006,2008