-
Analyzing the Morphology of Late-phase Stellar Flares From G-, K-, and M-type Stars
Authors:
Denise G. Yudovich,
Kai E. Yang,
Xudong Sun
Abstract:
Stellar flares occasionally present a $\textit{peak-bump}$ light curve morphology, consisting of an initial impulsive phase followed by a gradual late phase. Analyzing this specific morphology can uncover the underlying physics of stellar flare dynamics, particularly the plasma heating-evaporation-condensation process. While previous studies have mainly examined peak-bump occurrences on M-dwarfs,…
▽ More
Stellar flares occasionally present a $\textit{peak-bump}$ light curve morphology, consisting of an initial impulsive phase followed by a gradual late phase. Analyzing this specific morphology can uncover the underlying physics of stellar flare dynamics, particularly the plasma heating-evaporation-condensation process. While previous studies have mainly examined peak-bump occurrences on M-dwarfs, this report extends the investigation to G-, K-, and M-type stars. We utilize the flare catalog published by arXiv:2212.00993, encompassing 12,597 flares, detected by using $\textit{Transiting Exoplanet Survey Satellite}$ (TESS) observations. Our analysis identifies 10,142 flares with discernible classical and complex morphology, of which 197 ($\sim1.9\%$) exhibit the peak-bump feature. We delve into the statistical properties of these TESS late-phase flares, noting that both the amplitude and full-width-half-maximum (FWHM) duration of both the peaks and bumps show positive correlations across all source-star spectral types, following a power law with indices 0.69 $\pm$ 0.09 and 1.0 $\pm$ 0.15, respectively. Additionally, a negative correlation between flare amplitude and the effective temperature of their host stars is observed. Compared to the other flares in our sample, peak-bump flares tend to have larger and longer initial peak amplitudes and FWHM durations, and possess energies ranging from $10^{31}$ to $10^{36}$ erg.
△ Less
Submitted 20 March, 2025;
originally announced March 2025.
-
Spectropolarimetric Inversion in Four Dimensions with Deep Learning (SPIn4D): I. Overview, Magnetohydrodynamic Modeling, and Stokes Profile Synthesis
Authors:
Kai E. Yang,
Lucas A. Tarr,
Matthias Rempel,
S. Curt Dodds,
Sarah A. Jaeggli,
Peter Sadowski,
Thomas A. Schad,
Ian Cunnyngham,
Jiayi Liu,
Yannik Glaser,
Xudong Sun
Abstract:
The National Science Foundation's Daniel K. Inouye Solar Telescope (DKIST) will provide high-resolution, multi-line spectropolarimetric observations that are poised to revolutionize our understanding of the Sun. Given the massive data volume, novel inference techniques are required to unlock its full potential. Here, we provide an overview of our "SPIn4D" project, which aims to develop deep convol…
▽ More
The National Science Foundation's Daniel K. Inouye Solar Telescope (DKIST) will provide high-resolution, multi-line spectropolarimetric observations that are poised to revolutionize our understanding of the Sun. Given the massive data volume, novel inference techniques are required to unlock its full potential. Here, we provide an overview of our "SPIn4D" project, which aims to develop deep convolutional neural networks (CNNs) for estimating the physical properties of the solar photosphere from DKIST spectropolarimetric observations. We describe the magnetohydrodynamic (MHD) modeling and the Stokes profile synthesis pipeline that produce the simulated output and input data, respectively. These data will be used to train a set of CNNs that can rapidly infer the four-dimensional MHD state vectors by exploiting the spatiotemporally coherent patterns in the Stokes profile time series. Specifically, our radiative MHD model simulates the small-scale dynamo actions that are prevalent in quiet-Sun and plage regions. Six cases with different mean magnetic fields have been conducted; each case covers six solar-hours, totaling 109 TB in data volume. The simulation domain covers at least $25\times25\times8$ Mm with $16\times16\times12$ km spatial resolution, extending from the upper convection zone up to the temperature minimum region. The outputs are stored at a 40 s cadence. We forward model the Stokes profile of two sets of Fe I lines at 630 and 1565 nm, which will be simultaneously observed by DKIST and can better constrain the parameter variations along the line of sight. The MHD model output and the synthetic Stokes profiles are publicly available, with 13.7 TB in the initial release.
△ Less
Submitted 2 October, 2024; v1 submitted 29 July, 2024;
originally announced July 2024.
-
Stellar Flares Are Far-Ultraviolet Luminous
Authors:
Vera L. Berger,
Jason T. Hinkle,
Michael A. Tucker,
Benjamin J. Shappee,
Jennifer L. van Saders,
Daniel Huber,
Jeffrey W. Reep,
Xudong Sun,
Kai E. Yang
Abstract:
We identify 182 flares on 158 stars within 100 pc of the Sun in both the near-ultraviolet (NUV: 1750-2750 Å) and far-ultraviolet (FUV: 1350-1750 Å) using high-cadence light curves from the Galaxy Evolution Explorer (GALEX). Ultraviolet (UV) emission from stellar flares plays a crucial role in determining the habitability of exoplanetary systems. However, whether such UV emission promotes or threat…
▽ More
We identify 182 flares on 158 stars within 100 pc of the Sun in both the near-ultraviolet (NUV: 1750-2750 Å) and far-ultraviolet (FUV: 1350-1750 Å) using high-cadence light curves from the Galaxy Evolution Explorer (GALEX). Ultraviolet (UV) emission from stellar flares plays a crucial role in determining the habitability of exoplanetary systems. However, whether such UV emission promotes or threatens such life depends strongly on the energetics of these flares. Most studies assessing the effect of flares on planetary habitability assume a 9000 K blackbody spectral energy distribution that produces more NUV flux than FUV flux ($R \equiv F_{\rm FUV} / F_{\rm NUV} \approx \frac{1}{6}$). Instead, we observe the opposite with the excess FUV reaching $R \approx \frac{1}{2} - 2$, roughly $3-12$ times the expectation of a 9000 K blackbody. The ratio of FUV to NUV time-integrated flare energies is 3.0 times higher on average than would be predicted by a constant 9000 K blackbody during the flare. Finally, we find that the FUV/NUV ratio at peak tentatively correlates ($\sim 2 σ$ significance) both with total UV flare energy and with the G - RP color of the host star. On average, we observe higher FUV/NUV ratios at peak in $E_{\text{UV}}>10^{32}$ erg flares and in flares on fully convective stars.
△ Less
Submitted 19 December, 2023;
originally announced December 2023.
-
A Possible Mechanism for "Late Phase" in Stellar White-Light Flares
Authors:
Kai E. Yang,
Xudong Sun,
Graham S. Kerr,
Hugh S. Hudson
Abstract:
M-dwarf flares observed by the \textit{Transiting Exoplanet Survey Satellite} (\textit{TESS}) sometimes exhibit a "peak-bump" light-curve morphology, characterized by a secondary, gradual peak well after the main, impulsive peak. A similar "late phase" is frequently detected in solar flares observed in the extreme-ultraviolet from longer hot coronal loops distinct from the impulsive flare structur…
▽ More
M-dwarf flares observed by the \textit{Transiting Exoplanet Survey Satellite} (\textit{TESS}) sometimes exhibit a "peak-bump" light-curve morphology, characterized by a secondary, gradual peak well after the main, impulsive peak. A similar "late phase" is frequently detected in solar flares observed in the extreme-ultraviolet from longer hot coronal loops distinct from the impulsive flare structures. White-light emission has also been observed in off-limb solar flare loops. Here, we perform a suite of one-dimensional hydrodynamic loop simulations for M-dwarf flares inspired by these solar examples. Our results suggest that coronal plasma condensation following impulsive flare heating can yield high electron number density in the loop, allowing it to contribute significantly to the optical light curves via free-bound and free-free emission mechanisms. Our simulation results qualitatively agree with \textit{TESS} observations: the longer evolutionary time scale of coronal loops produces a distinct, secondary emission peak; its intensity increases with the injected flare energy. We argue that coronal plasma condensation is a possible mechanism for the \textit{TESS} late-phase flares.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Data-constrained Magnetohydrodynamic Simulation of an Intermediate Solar Filament Eruption
Authors:
Yang Guo,
Jinhan Guo,
Yiwei Ni,
M. D. Ding,
P. F. Chen,
Chun Xia,
Rony Keppens,
Kai E. Yang
Abstract:
Solar eruptive activities could occur in weak magnetic field environments and over large spatial scales, especially relevant to eruptions involving intermediate or quiescent solar filaments. To handle the large scales, we implement and apply a flux rope embedding method using regularized Biot-Savart laws in the spherical coordinate system. Combined with a potential field source surface model and a…
▽ More
Solar eruptive activities could occur in weak magnetic field environments and over large spatial scales, especially relevant to eruptions involving intermediate or quiescent solar filaments. To handle the large scales, we implement and apply a flux rope embedding method using regularized Biot-Savart laws in the spherical coordinate system. Combined with a potential field source surface model and a magneto-frictional method, a nonlinear force-free field comprising a flux rope embedded in a potential field is constructed. Using the combined nonlinear force-free field as the initial condition, we then perform a zero-$β$ data-constrained magnetohydrodynamic (MHD) simulation for an M8.7 flare at 03:38 UT on 2012 January 23. The MHD model reproduces the eruption process, flare ribbon evolution (represented by the quasi-separatrix layer evolution) and kinematics of the flux rope. This approach could potentially model global-scale eruptions from weak field regions.
△ Less
Submitted 3 September, 2023;
originally announced September 2023.
-
Investigating pre-eruptive magnetic properties at the footprints of erupting magnetic flux ropes
Authors:
Wensi Wang,
Jiong Qiu,
Rui Liu,
Chunming Zhu,
Kai E Yang,
Qiang Hu,
Yuming Wang
Abstract:
It is well established that solar eruptions are powered by free magnetic energy stored in current-carrying magnetic field in the corona. It has also been generally accepted that magnetic flux ropes (MFRs) are a critical component of many coronal mass ejections (CMEs). What remains controversial is whether MFRs are present well before the eruption. Our aim is to identify progenitors of MFRs, and in…
▽ More
It is well established that solar eruptions are powered by free magnetic energy stored in current-carrying magnetic field in the corona. It has also been generally accepted that magnetic flux ropes (MFRs) are a critical component of many coronal mass ejections (CMEs). What remains controversial is whether MFRs are present well before the eruption. Our aim is to identify progenitors of MFRs, and investigate pre-eruptive magnetic properties associated with these progenitors. Here we analyze 28 MFRs erupting within 45 deg from the disk center from 2010 to 2015. All MFRs'feet are well identified by conjugate coronal dimmings. We then calculate magnetic properties at the feet of the MFRs, prior to their eruptions, using Helioseismic and Magnetic Imager (HMI) vector magnetograms. Our results show that only 8 erupting MFRs are associated with significant non-neutralized electric currents, 4 of which also exhibit pre-eruptive dimmings at the foot-prints. Twist and current distributions are asymmetric at the two feet of these MFRs. The presence of pre-eruption dimmings associated with non-neutralized currents suggests the pre-existing MFRs. Furthermore, evolution of conjugate dimmings and electric currents within the foot-prints can provide clues about the internal structure of MFRs and their formation mechanism.
△ Less
Submitted 28 November, 2022;
originally announced November 2022.
-
Reconstructing Highly-twisted Magnetic Fields
Authors:
Victor M. Demcsak,
Michael S. Wheatland,
Alpha Mastrano,
Kai E. Yang
Abstract:
We investigate the ability of a nonlinear force-free code to calculate highly-twisted magnetic field configurations using the Titov and Démoulin (1999) equilibrium field as a test case. The code calculates a force-free field using boundary conditions on the normal component of the field in the lower boundary, and the normal component of the current density over one polarity of the field in the low…
▽ More
We investigate the ability of a nonlinear force-free code to calculate highly-twisted magnetic field configurations using the Titov and Démoulin (1999) equilibrium field as a test case. The code calculates a force-free field using boundary conditions on the normal component of the field in the lower boundary, and the normal component of the current density over one polarity of the field in the lower boundary. The code can also use the current density over both polarities of the field in the lower boundary as a boundary condition. We investigate the accuracy of the reconstructions with increasing flux-rope surface twist number $N_{\textrm{t}}$, achieved by decreasing the sub-surface line current in the model. We find that the code can approximately reconstruct the Titov-Démoulin field for surface twist numbers up to $N_{\textrm{t}} \approx 8.8$. This includes configurations with bald patches. We investigate the ability to recover bald patches, and more generally identify the limitations of our method for highly-twisted fields. The results have implications for our ability to reconstruct coronal magnetic fields from observational data.
△ Less
Submitted 7 August, 2020;
originally announced August 2020.
-
Self-consistent Nonlinear Force-free Field Reconstruction from Weighted Boundary Conditions
Authors:
Alpha Mastrano,
Kai E. Yang,
Michael S. Wheatland
Abstract:
Vector magnetogram data are often used as photospheric boundary conditions for force-free coronal magnetic field extrapolations. In general, however, vector magnetogram data are not consistent with the force-free assumption. In this article, we demonstrate a way to deal with inconsistent boundary data, by generalizing the "self-consistency procedure" of Wheatland & Regnier (2009). In that procedur…
▽ More
Vector magnetogram data are often used as photospheric boundary conditions for force-free coronal magnetic field extrapolations. In general, however, vector magnetogram data are not consistent with the force-free assumption. In this article, we demonstrate a way to deal with inconsistent boundary data, by generalizing the "self-consistency procedure" of Wheatland & Regnier (2009). In that procedure, the inconsistency is resolved by an iterative process of constructing two solutions based on the values of the force-free parameter alpha on the two polarities of the field in the boundary (the P and N polarities), and taking uncertainty-weighted averages of the boundary alpha values in the P and N solutions. When the alpha values in the P and N regions are very different, the self-consistent solution may lose high alpha values from the boundary conditions. We show how, by altering the weighting of the uncertainties in the P or N boundary conditions, we can preserve high alpha values in the self-consistent solution. The weighted self-consistent extrapolation method is demonstrated on an analytic bipole field and applied to vector magnetogram data taken by the Helioseismic and Magnetic Imager (HMI) instrument for NOAA active region AR 12017 on 2014 March 29.
△ Less
Submitted 26 April, 2020;
originally announced April 2020.
-
Relative Magnetic Helicity Based on a Periodic Potential Field
Authors:
Kai E. Yang,
Michael S. Wheatland,
Stuart A. Gilchrist
Abstract:
Magnetic helicity is conserved under ideal magnetohydrodynamics (MHD) and quasi-conserved even under a resistive process. The standard definition for magnetic helicity cannot be applied directly to an open magnetic field in a volume, because it is gauge-dependent. Instead, the relative magnetic helicity is widely used. We find that the energy of a potential magnetic field in a rectangular domain w…
▽ More
Magnetic helicity is conserved under ideal magnetohydrodynamics (MHD) and quasi-conserved even under a resistive process. The standard definition for magnetic helicity cannot be applied directly to an open magnetic field in a volume, because it is gauge-dependent. Instead, the relative magnetic helicity is widely used. We find that the energy of a potential magnetic field in a rectangular domain with periodic lateral boundary conditions is less than that of the field with a fixed normal component on all six boundaries. To make use of this lower energy potential field in the analysis of relative magnetic helicity, we introducing a new definition for magnetic helicity for the magnetic field, which involves the periodic potential field. We apply this definition to a sequence of analytic solutions and a numerical simulation. The results show that our new gauge-invariant helicity is very close to the current-carrying part of the relative magnetic helicity of the original magnetic field. We find also that the ratio between the current-carrying helicity and the relative magnetic helicity for the original and our defined relative helicity show different behavior. It seems that the new helicity is more sensitive to the component of the field due to the electric current in the volume, which is the source for instabilities and solar eruptive phenomena.
△ Less
Submitted 18 April, 2020;
originally announced April 2020.
-
Evolution of A Magnetic Flux Rope toward Eruption
Authors:
Wensi Wang,
Chunming Zhu,
Jiong Qiu,
Rui Liu,
Kai E. Yang,
Qiang Hu
Abstract:
It is well accepted that a magnetic flux rope (MFR) is a critical component of many coronal mass ejections (CMEs), yet how it evolves toward eruption remains unclear. Here we investigate the continuous evolution of a pre-existing MFR, which is rooted in strong photospheric magnetic fields and electric currents. The evolution of the MFR is observed by the Solar Terrestrial Relations Observatory (ST…
▽ More
It is well accepted that a magnetic flux rope (MFR) is a critical component of many coronal mass ejections (CMEs), yet how it evolves toward eruption remains unclear. Here we investigate the continuous evolution of a pre-existing MFR, which is rooted in strong photospheric magnetic fields and electric currents. The evolution of the MFR is observed by the Solar Terrestrial Relations Observatory (STEREO) and the Solar Dynamics Observatory (SDO) from multiple viewpoints. From STEREO's perspective, the MFR starts to rise slowly above the limb five hours before it erupts as a halo CME on 2012 June 14. In SDO observations, conjugate dimmings develop on the disk, simultaneously with the gradual expansion of the MFR, suggesting that the dimmings map the MFR's feet. The evolution comprises a two-stage gradual expansion followed by another stage of rapid acceleration/eruption. Quantitative measurements indicate that magnetic twist of the MFR increases from 1.0 +/- 0.5 to 2.0 +/- 0.5 turns during the five-hour expansion, and further increases to about 4.0 turns per AU when detected as a magnetic cloud at 1 AU two day later. In addition, each stage is preceded by flare(s), implying reconnection is actively involved in the evolution and eruption of the MFR. The implications of these measurements on the CME initiation mechanisms are discussed.
△ Less
Submitted 9 December, 2018;
originally announced December 2018.
-
Extremely Large Extreme-ultraviolet Late Phase Powered by Intense Early Heating in a Non-eruptive Solar Flare
Authors:
Yu Dai,
Mingde Ding,
Weiguo Zong,
Kai E. Yang
Abstract:
We analyzed and modeled an M1.2 non-eruptive solar flare on 2011 September 9. The flare exhibits a strong late-phase peak of the warm coronal emissions ($\sim$3~MK) of extreme-ultraviolet (EUV), with peak emission over 1.3 times that of the main flare peak. Multiple flare ribbons are observed, whose evolution indicates a two-stage energy release process. A non-linear force-free field (NLFFF) extra…
▽ More
We analyzed and modeled an M1.2 non-eruptive solar flare on 2011 September 9. The flare exhibits a strong late-phase peak of the warm coronal emissions ($\sim$3~MK) of extreme-ultraviolet (EUV), with peak emission over 1.3 times that of the main flare peak. Multiple flare ribbons are observed, whose evolution indicates a two-stage energy release process. A non-linear force-free field (NLFFF) extrapolation reveals the existence of a magnetic null point, a fan-spine structure, and two flux ropes embedded in the fan dome. Magnetic reconnections involved in the flare are driven by the destabilization and rise of one of the flux ropes. In the first stage, the fast ascending flux rope drives reconnections at the null point and the surrounding quasi-separatrix layer (QSL), while in the second stage, reconnection mainly occurs between the two legs of the field lines stretched by the eventually stopped flux rope. The late-phase loops are mainly produced by the first-stage QSL reconnection, while the second-stage reconnection is responsible for the heating of main flaring loops. The first-stage reconnection is believed to be more powerful, leading to an extremely strong EUV late phase. We find that the delayed occurrence of the late-phase peak is mainly due to the long cooling process of the long late-phase loops. Using the model enthalpy-based thermal evolution of loops (EBTEL), we model the EUV emissions from a late-phase loop. The modeling reveals a peak heating rate of 1.1~erg~cm$^{-3}$~s$^{-1}$ for the late-phase loop, which is obviously higher than previous values.
△ Less
Submitted 19 August, 2018; v1 submitted 3 July, 2018;
originally announced July 2018.
-
Observationally quantified reconnection providing a viable mechanism for active region coronal heating
Authors:
Kai E. Yang,
Dana W. Longcope,
M. D. Ding,
Yang Guo
Abstract:
The heating of the Sun's corona has been explained by several different mechanisms including wave dissipation and magnetic reconnection. While both have been shown capable of supplying the requisite power, neither has been used in a quantitative model of observations fed by measured inputs. Here we show that impulsive reconnection is capable of producing an active region corona agreeing both quali…
▽ More
The heating of the Sun's corona has been explained by several different mechanisms including wave dissipation and magnetic reconnection. While both have been shown capable of supplying the requisite power, neither has been used in a quantitative model of observations fed by measured inputs. Here we show that impulsive reconnection is capable of producing an active region corona agreeing both qualitatively and quantitatively with extreme-ultraviolet observations. We calculate the heating power proportional to the velocity difference between magnetic footpoints and the photospheric plasma, called the non-ideal velocity. The length scale of flux elements reconnected in the corona is found to be around 160 km. The differential emission measure of the model corona agrees with that derived using multi-wavelength images. Synthesized extreme-ultraviolet images resemble observations both in their loop-dominated appearance and their intensity histograms. This work provides compelling evidence that impulsive reconnection events are a viable mechanism for heating the corona.
△ Less
Submitted 17 February, 2018;
originally announced February 2018.
