-
Comment on "Comments regarding "Transonic dislocation propagation in diamond" by Katagiri, et al. (Science 382, 69-72, 2023)" by Hawreliak, et al. (arXiv:2401.04213)
Authors:
Kento Katagiri,
Tatiana Pikuz,
Lichao Fang,
Bruno Albertazzi,
Shunsuke Egashira,
Yuichi Inubushi,
Genki Kamimura,
Ryosuke Kodama,
Michel Koenig,
Bernard Kozioziemski,
Gooru Masaoka,
Kohei Miyanishi,
Hirotaka Nakamura,
Masato Ota,
Gabriel Rigon,
Youichi Sakawa,
Takayoshi Sano,
Frank Schoofs,
Zoe J. Smith,
Keiichi Sueda,
Tadashi Togashi,
Tommaso Vinci,
Yifan Wang,
Makina Yabashi,
Toshinori Yabuuchi
, et al. (2 additional authors not shown)
Abstract:
In their comment (1), Hawreliak et al. claims that our observation of stacking fault formation and transonic dislocation propagation in diamond (2) is not valid as they interpret the observed features as cracks. In this response letter, we describe our rationale for interpreting the observed features as stacking faults. We also address other points raised in their comments, including the clarifica…
▽ More
In their comment (1), Hawreliak et al. claims that our observation of stacking fault formation and transonic dislocation propagation in diamond (2) is not valid as they interpret the observed features as cracks. In this response letter, we describe our rationale for interpreting the observed features as stacking faults. We also address other points raised in their comments, including the clarifications of how the results of Makarov et al. (3) are not in conflict with our study.
△ Less
Submitted 9 September, 2024;
originally announced September 2024.
-
Shock-driven amorphization and melt in Fe$_2$O$_3$
Authors:
Céline Crépisson,
Alexis Amouretti,
Marion Harmand,
Chrystèle Sanloup,
Patrick Heighway,
Sam Azadi,
David McGonegle,
Thomas Campbell,
David Alexander Chin,
Ethan Smith,
Linda Hansen,
Alessandro Forte,
Thomas Gawne,
Hae Ja Lee,
Bob Nagler,
YuanFeng Shi,
Guillaume Fiquet,
François Guyot,
Mikako Makita,
Alessandra Benuzzi-Mounaix,
Tommaso Vinci,
Kohei Miyanishi,
Norimasa Ozaki,
Tatiana Pikuz,
Hirotaka Nakamura
, et al. (6 additional authors not shown)
Abstract:
We present measurements on Fe$_2$O$_3$ amorphization and melt under laser-driven shock compression up to 209(10) GPa via time-resolved in situ x-ray diffraction. At 122(3) GPa, a diffuse signal is observed indicating the presence of a non-crystalline phase. Structure factors have been extracted up to 182(6) GPa showing the presence of two well-defined peaks. A rapid change in the intensity ratio o…
▽ More
We present measurements on Fe$_2$O$_3$ amorphization and melt under laser-driven shock compression up to 209(10) GPa via time-resolved in situ x-ray diffraction. At 122(3) GPa, a diffuse signal is observed indicating the presence of a non-crystalline phase. Structure factors have been extracted up to 182(6) GPa showing the presence of two well-defined peaks. A rapid change in the intensity ratio of the two peaks is identified between 145(10) and 151(10) GPa, indicative of a phase change. Present DFT+$U$ calculations of temperatures along Fe$_2$O$_3$ Hugoniot are in agreement with SESAME 7440 and indicate relatively low temperatures, below 2000 K, up to 150 GPa. The non-crystalline diffuse scattering is thus consistent with the - as yet unreported - shock amorphization of Fe$_2$O$_3$ between 122(3) and 145(10) GPa, followed by an amorphous-to-liquid transition above 151(10) GPa. Upon release, a non-crystalline phase is observed alongside crystalline $α$-Fe$_2$O$_3$. The extracted structure factor and pair distribution function of this release phase resemble those reported for Fe$_2$O$_3$ melt at ambient pressure.
△ Less
Submitted 30 August, 2024;
originally announced August 2024.
-
The importance of temperature-dependent collision frequency in PIC simulation on nanometric density evolution of highly-collisional strongly-coupled dense plasmas
Authors:
Mohammadreza Banjafar,
Lisa Randolph,
Lingen Huang,
S. V. Rahul,
Thomas R. Preston,
Toshinori Yabuuchi,
Mikako Makita,
Nicholas P. Dover,
Sebastian Göde,
Akira Kon,
James K. Koga,
Mamiko Nishiuchi,
Michael Paulus,
Christian Rödel,
Michael Bussmann,
Thomas E. Cowan,
Christian Gutt,
Adrian P. Mancuso,
Thomas Kluge,
Motoaki Nakatsutsumi
Abstract:
Particle-in-Cell (PIC) method is a powerful plasma simulation tool for investigating high-intensity femtosecond laser-matter interaction. However, its simulation capability at high-density plasmas around the Fermi temperature is considered to be inadequate due, among others, to the necessity of implementing atomic-scale collisions. Here, we performed a one-dimensional with three-velocity space (1D…
▽ More
Particle-in-Cell (PIC) method is a powerful plasma simulation tool for investigating high-intensity femtosecond laser-matter interaction. However, its simulation capability at high-density plasmas around the Fermi temperature is considered to be inadequate due, among others, to the necessity of implementing atomic-scale collisions. Here, we performed a one-dimensional with three-velocity space (1D3V) PIC simulation that features the realistic collision frequency around the Fermi temperature and atomic-scale cell size. The results are compared with state-of-the-art experimental results as well as with hydrodynamic simulation. We found that the PIC simulation is capable of simulating the nanoscale dynamics of solid-density plasmas around the Fermi temperature up to $\sim$2~ps driven by a laser pulse at the moderate intensity of $10^{14-15}$~$\mathrm{W/cm^{2}}$, by comparing with the state-of-the-art experimental results. The reliability of the simulation can be further improved in the future by implementing multi-dimensional kinetics and radiation transport.
△ Less
Submitted 24 April, 2024;
originally announced April 2024.
-
(Sub-)picosecond surface correlations of femtosecond laser excited Al-coated multilayers observed by grazing-incidence x-ray scattering
Authors:
Lisa Randolph,
Mohammadreza Banjafar,
Toshinori Yabuuchi,
Carsten Baehtz,
Michael Bussmann,
Nick P. Dover,
Lingen Huang,
Yuichi Inubushi,
Gerhard Jakob,
Mathias Kläui,
Dmitriy Ksenzov,
Mikako Makita,
Kohei Miyanishi,
Mamiko Nishiushi,
Özgül Öztürk,
Michael Paulus,
Alexander Pelka,
Thomas R. Preston,
Jan-Patrick Schwinkendorf,
Keiichi Sueda,
Tadashi Togashi,
Thomas E. Cowan,
Thomas Kluge,
Christian Gutt,
Motoaki Nakatsutsumi
Abstract:
Femtosecond high-intensity laser pulses at intensities surpassing $10^{14} \,\text{W}/\text{cm}^2$ can generate a diverse range of functional surface nanostructures. Achieving precise control over the production of these functional structures necessitates a thorough understanding of the surface morphology dynamics with nanometer-scale spatial resolution and picosecond-scale temporal resolution. In…
▽ More
Femtosecond high-intensity laser pulses at intensities surpassing $10^{14} \,\text{W}/\text{cm}^2$ can generate a diverse range of functional surface nanostructures. Achieving precise control over the production of these functional structures necessitates a thorough understanding of the surface morphology dynamics with nanometer-scale spatial resolution and picosecond-scale temporal resolution. In this study, we show that individual XFEL pulses can elucidate structural changes on surfaces induced by laser-generated plasmas, employing grazing-incidence small-angle x-ray scattering (GISAXS). Using aluminum-coated multilayer samples we can differentiate between ultrafast surface morphology dynamics and subsequent subsurface density dynamics, achieving nanometer-depth sensitivity and subpicosecond temporal resolution. The observed subsurface density dynamics serve to validate advanced simulation models depicting matter under extreme conditions. Our findings promise to unveil novel avenues for laser material nanoprocessing and high-energy-density science.
△ Less
Submitted 26 April, 2024; v1 submitted 23 April, 2024;
originally announced April 2024.
-
Transonic Dislocation Propagation in Diamond
Authors:
Kento Katagiri,
Tatiana Pikuz,
Lichao Fang,
Bruno Albertazzi,
Shunsuke Egashira,
Yuichi Inubushi,
Genki Kamimura,
Ryosuke Kodama,
Michel Koenig,
Bernard Kozioziemski,
Gooru Masaoka,
Kohei Miyanishi,
Hirotaka Nakamura,
Masato Ota,
Gabriel Rigon,
Youichi Sakawa,
Takayoshi Sano,
Frank Schoofs,
Zoe J. Smith,
Keiichi Sueda,
Tadashi Togashi,
Tommaso Vinci,
Yifan Wang,
Makina Yabashi,
Toshinori Yabuuchi
, et al. (2 additional authors not shown)
Abstract:
The motion of line defects (dislocations) has been studied for over 60 years but the maximum speed at which they can move is unresolved. Recent models and atomistic simulations predict the existence of a limiting velocity of dislocation motions between the transonic and subsonic ranges at which the self-energy of dislocation diverges, though they do not deny the possibility of the transonic disloc…
▽ More
The motion of line defects (dislocations) has been studied for over 60 years but the maximum speed at which they can move is unresolved. Recent models and atomistic simulations predict the existence of a limiting velocity of dislocation motions between the transonic and subsonic ranges at which the self-energy of dislocation diverges, though they do not deny the possibility of the transonic dislocations. We use femtosecond x-ray radiography to track ultrafast dislocation motion in shock-compressed single-crystal diamond. By visualizing stacking faults extending faster than the slowest sound wave speed of diamond, we show the evidence of partial dislocations at their leading edge moving transonically. Understanding the upper limit of dislocation mobility in crystals is essential to accurately model, predict, and control the mechanical properties of materials under extreme conditions.
△ Less
Submitted 6 October, 2023; v1 submitted 7 March, 2023;
originally announced March 2023.
-
Strength of diamond beyond the elastic limit under dynamic compression
Authors:
K. Katagiri,
N. Ozaki,
L. E. Dresselhaus-Marais,
J. H. Eggert,
Y. Inubushi,
T. Irifune,
M. Koenig,
T. Matsuoka,
K. Miyanishi,
H. Nakamura,
N. Nishiyama,
T. Okuchi,
T. Sekine,
Y. Seto,
K. Sueda,
Y. Tange,
T. Togashi,
Y. Umeda,
M. Yabashi,
T. Yabuuchi,
R. Kodama
Abstract:
Extremely high pressures over a million of atmospheres are required to deform diamonds permanently. Under dynamic high-pressure conditions, even such strong materials lose their strengths so rapidly that the initially pristine lattice transforms into complex dynamics. Here, we report femtosecond x-ray diffraction observations that directly resolve how shock waves deform the crystal lattice in the…
▽ More
Extremely high pressures over a million of atmospheres are required to deform diamonds permanently. Under dynamic high-pressure conditions, even such strong materials lose their strengths so rapidly that the initially pristine lattice transforms into complex dynamics. Here, we report femtosecond x-ray diffraction observations that directly resolve how shock waves deform the crystal lattice in the isotropic nano-polycrystalline form of diamond. The results show that the nano-grain reinforced diamond retains its strength at shock pressures far beyond its elastic limit until it finally approaches zero at 707 GPa, indicating the existence of brittle-ductile transition of nano-polycrystalline diamond under high-strain rate shock compression. The atomic-level deformation process of the diamond observed in this study is a key benchmark for designing high strength materials and simulating their behavior under extreme conditions.
△ Less
Submitted 5 August, 2022;
originally announced August 2022.
-
Direct imaging of shock wave splitting in diamond at Mbar pressures
Authors:
S. S. Makarov,
S. A. Dyachkov,
T. A. Pikuz,
K. Katagiri,
V. V. Zhakhovsky,
N. A. Inogamov,
V. A. Khokhlov,
A. S. Martynenko,
B. Albertazzi,
G. Rigon,
P. Mabey,
N. Hartley,
Y. Inubushi,
K. Miyanishi,
K. Sueda,
T. Togashi,
M. Yabashi,
T. Yabuuchi,
R. Kodama,
S. A. Pikuz,
M. Koenig,
N. Ozaki
Abstract:
The propagation of a shock wave in solids can stress them to ultra-high pressures of millions of atmospheres. Understanding the behavior of matter at these extreme pressures is essential to describe a wide range of physical phenomena, including the formation of planets, young stars and cores of super-Earths, as well as the behavior of advanced ceramic materials subjected to such stresses. Under me…
▽ More
The propagation of a shock wave in solids can stress them to ultra-high pressures of millions of atmospheres. Understanding the behavior of matter at these extreme pressures is essential to describe a wide range of physical phenomena, including the formation of planets, young stars and cores of super-Earths, as well as the behavior of advanced ceramic materials subjected to such stresses. Under megabar (Mbar) pressure, even a solid with high strength exhibits plastic properties, causing the shock wave to split in two. This phenomenon is described by theoretical models, but without direct experimental measurements to confirm them, their validity is still in doubt. Here, we present the results of an experiment in which the evolution of the coupled elastic-plastic wave structure in diamond was directly observed and studied with submicron spatial resolution, using the unique capabilities of the X-ray free-electron laser. The direct measurements allowed, for the first time, the fitting and validation of a strength model for diamond in the range of several Mbar by performing continuum mechanics simulations in 2D geometry. The presented experimental approach to the study of shock waves in solids opens up new possibilities for the direct verification and construction of the equations of state of matter in the ultra-high pressure range, which are relevant for the solution of a variety of problems in high energy density physics.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
Nanoscale subsurface dynamics of solids upon high-intensity laser irradiation observed by femtosecond grazing-incidence x-ray scattering
Authors:
Lisa Randolph,
Mohammadreza Banjafar,
Thomas R. Preston,
Toshinori Yabuuchi,
Mikako Makita,
Nicholas P. Dover,
Christian Rödel,
Sebastian Göde,
Yuichi Inubushi,
Gerhard Jakob,
Johannes Kaa,
Akira Kon,
James K. Koga,
Dmitriy Ksenzov,
Takeshi Matsuoka,
Mamiko Nishiuchi,
Michael Paulus,
Frederic Schon,
Keiichi Sueda,
Yasuhiko Sentoku,
Tadashi Togashi,
Mehran Vafaee-Khanjani,
Michael Bussmann,
Thomas E. Cowan,
Mathias Kläui
, et al. (6 additional authors not shown)
Abstract:
Observing ultrafast laser-induced structural changes in nanoscale systems is essential for understanding the dynamics of intense light-matter interactions. For laser intensities on the order of $10^{14} \, \rm W/cm^2$, highly-collisional plasmas are generated at and below the surface. Subsequent transport processes such as heat conduction, electron-ion thermalization, surface ablation and resolidi…
▽ More
Observing ultrafast laser-induced structural changes in nanoscale systems is essential for understanding the dynamics of intense light-matter interactions. For laser intensities on the order of $10^{14} \, \rm W/cm^2$, highly-collisional plasmas are generated at and below the surface. Subsequent transport processes such as heat conduction, electron-ion thermalization, surface ablation and resolidification occur at picosecond and nanosecond time scales. Imaging methods, e.g. using x-ray free-electron lasers (XFEL), were hitherto unable to measure the depth-resolved subsurface dynamics of laser-solid interactions with appropriate temporal and spatial resolution. Here we demonstrate picosecond grazing-incidence small-angle x-ray scattering (GISAXS) from laser-produced plasmas using XFEL pulses. Using multi-layer (ML) samples, both the surface ablation and subsurface density dynamics are measured with nanometer depth resolution. Our experimental data challenges the state-of-the-art modeling of matter under extreme conditions and opens new perspectives for laser material processing and high-energy-density science.
△ Less
Submitted 8 October, 2021; v1 submitted 30 December, 2020;
originally announced December 2020.
-
Using Diffuse Scattering to Observe X-Ray-Driven Nonthermal Melting
Authors:
N. J. Hartley,
J. Grenzer,
L. Huang,
Y. Inubushi,
N. Kamimura,
K. Katagiri,
R. Kodama,
A. Kon,
W. Lu,
M. Makita,
T. Matsuoka,
S. Nakajima,
N. Ozaki,
T. Pikuz,
A. Rode,
D. Sagae,
A. K. Schuster,
K. Tono,
K. Voigt,
J. Vorberger,
T. Yabuuchi,
E. E. McBride,
D. Kraus
Abstract:
We present results from the SPring-8 Angstrom Compact free electron LAser (SACLA) XFEL facility, using a high intensity ($\sim\!10^{20}\,$W/cm$^2$) X-ray pump X-ray probe scheme to observe changes in the ionic structure of silicon induced by X-ray heating of the electrons. By avoiding Laue spots in the scattering signal from a single crystalline sample, we observe a rapid rise in diffuse scatterin…
▽ More
We present results from the SPring-8 Angstrom Compact free electron LAser (SACLA) XFEL facility, using a high intensity ($\sim\!10^{20}\,$W/cm$^2$) X-ray pump X-ray probe scheme to observe changes in the ionic structure of silicon induced by X-ray heating of the electrons. By avoiding Laue spots in the scattering signal from a single crystalline sample, we observe a rapid rise in diffuse scattering, which we attribute to a loss of lattice order and a transition to a liquid state within 100 fs of irradiation, a timescale which agrees well with first principles simulations, but is faster than that predicted by purely inertial behavior. This method is capable of observing liquid scattering without masking or filtering of signal from the ambient solid, allowing the liquid structure to be measured throughout and beyond the phase change.
△ Less
Submitted 31 March, 2022; v1 submitted 29 July, 2020;
originally announced July 2020.
