-
Study on the composition optimization method for improving the fluidity of cast Ti$_2$AlNb alloy and its mechanism
Authors:
Zhang Jian,
Zhang Xiwen,
Wang Hongwei,
Wu Mengwei,
Ma Xiong,
Liang Xiaobo,
Zhang Jianwei,
Liu Ruiping,
Sun Zhimin,
Zhang Ji
Abstract:
In this paper, the effects of Al, Nb main elements, Fe, Mo, W, Co, B, Si and their contents on the fluidity of Ti-22Al-25Nb alloy were investigated. The composition that was beneficial to improve the fluidity was screened through the thermodynamic software calculating thermophysical parameters affecting the fluidity of Ti$_2$AlNb alloy, the numerical simulation test of its fluidity and the verific…
▽ More
In this paper, the effects of Al, Nb main elements, Fe, Mo, W, Co, B, Si and their contents on the fluidity of Ti-22Al-25Nb alloy were investigated. The composition that was beneficial to improve the fluidity was screened through the thermodynamic software calculating thermophysical parameters affecting the fluidity of Ti$_2$AlNb alloy, the numerical simulation test of its fluidity and the verification test of the fluidity of optimized alloys. Finally, the improvement mechanism of the alloy fluidity was discussed. Results showed that the appropriate reduction of Nb element was better than Al element for the improvement of fluidity. The addition of trace Fe, B and Si elements were beneficial to the improvement of fluidity, the improvement effect of B element was best, while the addition of trace Mo, W, Co were not conducive to the improvement of fluidity. The cessation mechanism of Ti$_2$AlNb alloy is the cessation mechanism of the alloy with a wide crystallization temperature range. The composition which was most beneficial to improve the fluidity was Ti-22Al-24Nb-0.1B. The main reasons for the improvement of the fluidity had two sides: on the one hand, the reduction of 1at% Nb and the addition of 0.1at% B not only increased the superheat and crystallization latent heat of the alloy, but also reduced the melt viscosity and thermal conductivity, thus improving the fluidity. On the other hand, the TiB phase refined the grains, the fine grains prevented the dendrite from growing into developed dendrite networks, inhibited the adverse effect of the increase in the width of the solidification zone on the fluidity, reduced the flow resistance of the molten metal, and further improved the fluidity of the alloy.
△ Less
Submitted 23 January, 2023;
originally announced January 2023.
-
Super-Eddington accretion of the first Galactic Ultra-luminous X-ray pulsar Swift J0243.6+6124
Authors:
Liu Jiren,
Peter A Jenke,
Ji Long,
Zhang Shuang-Nan,
Zhang Shu,
Ge Mingyu,
Liao Jinyuan,
Li Xiaobo,
Song Liming
Abstract:
We present a detailed timing study of the pulse profile of Swift J0243.6+6124 with HXMT and Fermi/GBM data during its 2017 giant outburst. The double-peak profile at luminosity above $5\times10^{38}$erg\,s$^{-1}$ is found to be 0.25 phase offset from that below $1.5\times10^{38}$erg\,s$^{-1}$, which strongly supports for a transition from a pencil beam to a fan beam, and thus for the formation of…
▽ More
We present a detailed timing study of the pulse profile of Swift J0243.6+6124 with HXMT and Fermi/GBM data during its 2017 giant outburst. The double-peak profile at luminosity above $5\times10^{38}$erg\,s$^{-1}$ is found to be 0.25 phase offset from that below $1.5\times10^{38}$erg\,s$^{-1}$, which strongly supports for a transition from a pencil beam to a fan beam, and thus for the formation of shock dominated accretion column. During the rising stage of the high double-peak regime, the faint peak got saturated in 10-100 keV band above a luminosity of $L_t\sim1.3\times10^{39}$erg\,s$^{-1}$, which is coincident with sudden spectral changes of both the main and faint peaks. They imply a sudden change of emission pattern around $L_t$. The spin-up rate ($\dotĪ½$) is linearly correlated with luminosity ($L$) below $L_t$, consistent with the prediction of a radiation pressure dominated (RPD) disk. The $\dotĪ½-L$ relation flattens above $L_t$, indicating a less efficient transfer of angular momentum and a change of accretion disk geometry above $L_t$. It is likely due to irradiation of the disk by the central accretion column and indicates significant radiation feedback before the inner disk radius reaching the spherization radius.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
Temperature dependence of the light yield of the LAB-based and mesitylene-based liquid scintillators
Authors:
Xia DongMei,
Yu BoXiang,
Li XiaoBo,
Sun XiLei,
Ding YaYun,
Zhou Li,
Cao Jun,
Hu Wei,
Ye XingCheng,
Chen HaiTao,
Ding XueFeng,
Du Bing
Abstract:
We studied the temperature dependence of the light yield of the linear alkyl benzene (LAB)-based and mesitylene-based liquid scintillators. The light yield increases by 23% for both liquid scintillators when the temperature is lowered from $26\;^{\circ}$C to $-40\;^{\circ }$C, correcting for the temperature response of the photomultiplier tube. The measurements help to understand the energy respon…
▽ More
We studied the temperature dependence of the light yield of the linear alkyl benzene (LAB)-based and mesitylene-based liquid scintillators. The light yield increases by 23% for both liquid scintillators when the temperature is lowered from $26\;^{\circ}$C to $-40\;^{\circ }$C, correcting for the temperature response of the photomultiplier tube. The measurements help to understand the energy response of the liquid scintillator detectors. Especially, the next generation reactor neutrino experiments for neutrino mass hierarchy, such as the Jiangmen Underground Neutrino Observatory (JUNO), require very high energy resolution. As no apparent degradation on the liquid scintillator transparency was observed, lowering the operation temperature of the detector to $\sim4\;^\circ$C will increase the photoelectron yield of the detector by 13%, combining the light yield increase of the liquid scintillator and the quantum efficiency increase of the photomultiplier tubes.
△ Less
Submitted 27 February, 2014;
originally announced February 2014.
