-
An experimental evaluation of the interplay between geometry and scale on cross-flow turbine performance
Authors:
Aidan Hunt,
Benjamin Strom,
Gregory Talpey,
Hannah Ross,
Isabel Scherl,
Steven Brunton,
Martin Wosnik,
Brian Polagye
Abstract:
Cross-flow turbines harness kinetic energy in wind or moving water. Due to their unsteady fluid dynamics, it can be difficult to predict the interplay between aspects of rotor geometry and turbine performance. This study considers the effects of three geometric parameters: the number of blades, the preset pitch angle, and the chord-to-radius ratio. The relevant fluid dynamics of cross-flow turbine…
▽ More
Cross-flow turbines harness kinetic energy in wind or moving water. Due to their unsteady fluid dynamics, it can be difficult to predict the interplay between aspects of rotor geometry and turbine performance. This study considers the effects of three geometric parameters: the number of blades, the preset pitch angle, and the chord-to-radius ratio. The relevant fluid dynamics of cross-flow turbines are reviewed, as are prior experimental studies that have investigated these parameters in a more limited manner. Here, 223 unique experiments are conducted across an order of magnitude of diameter-based Reynolds numbers ($\approx 8\!\times\!10^4 - 8\!\times\!10^5$) in which the performance implications of these three geometric parameters are evaluated. In agreement with prior work, maximum performance is generally observed to increase with Reynolds number and decrease with blade count. The broader experimental space clarifies parametric interdependencies; for example, the optimal preset pitch angle is increasingly negative as the chord-to-radius ratio increases. As these experiments vary both the chord-to-radius ratio and blade count, the performance of different rotor geometries with the same solidity (the ratio of total blade chord to rotor circumference) can also be evaluated. Results demonstrate that while solidity can be a poor predictor of maximum performance, across all scales and tested geometries it is an excellent predictor of the tip-speed ratio corresponding to maximum performance. Overall, these results present a uniquely holistic view of relevant geometric considerations for cross-flow turbine rotor design and provide a rich dataset for validation of numerical simulations and reduced-order models.
△ Less
Submitted 29 August, 2024; v1 submitted 31 October, 2023;
originally announced October 2023.
-
Actuator line modeling of vertical-axis turbines
Authors:
Peter Bachant,
Anders Goude,
Martin Wosnik
Abstract:
To bridge the gap between high and low fidelity numerical modeling tools for vertical-axis (or cross-flow) turbines (VATs or CFTs), an actuator line model (ALM) was developed and validated for both a high and a medium solidity vertical-axis turbine at rotor diameter Reynolds numbers $Re_D \sim 10^6$. The ALM is a combination of classical blade element theory and Navier--Stokes based flow models, a…
▽ More
To bridge the gap between high and low fidelity numerical modeling tools for vertical-axis (or cross-flow) turbines (VATs or CFTs), an actuator line model (ALM) was developed and validated for both a high and a medium solidity vertical-axis turbine at rotor diameter Reynolds numbers $Re_D \sim 10^6$. The ALM is a combination of classical blade element theory and Navier--Stokes based flow models, and in this study both $k$--$ε$ Reynolds-averaged Navier--Stokes (RANS) and Smagorinsky large eddy simulation (LES) turbulence models were tested using the open-source OpenFOAM computational fluid dynamics framework. The RANS models were able to be run on coarse grids while still providing good convergence behavior in terms of the mean power coefficient, and also approximately four orders of magnitude reduction in computational expense compared with 3-D blade-resolved RANS simulations. Submodels for dynamic stall, end effects, added mass, and flow curvature were implemented, resulting in reasonable performance predictions for the high solidity rotor, more discrepancies for the medium solidity rotor, and overprediction for both cases at high tip speed ratio. The wake results showed that the ALM was able to capture some of the important flow features that contribute to VAT's relatively fast wake recovery---a large improvement over the conventional actuator disk model. The mean flow field was better realized with the LES, which still represented a computational savings of two orders of magnitude compared with 3-D blade-resolved RANS, though vortex breakdown and subsequent turbulence generation appeared to be underpredicted, which necessitates further investigation of optimal subgrid scale modeling.
△ Less
Submitted 22 September, 2018; v1 submitted 4 May, 2016;
originally announced May 2016.
-
Modeling the near-wake of a vertical-axis cross-flow turbine with 2-D and 3-D RANS
Authors:
Peter Bachant,
Martin Wosnik
Abstract:
The near-wake of a vertical-axis cross-flow turbine (CFT) was modeled numerically via blade-resolved $k$-$ω$ SST and Spalart-Allmaras RANS models in two and three dimensions. Results for each case are compared with experimental measurements of the turbine shaft power, overall drag, mean velocity, turbulence kinetic energy, and momentum transport terms in the near-wake at one diameter downstream. I…
▽ More
The near-wake of a vertical-axis cross-flow turbine (CFT) was modeled numerically via blade-resolved $k$-$ω$ SST and Spalart-Allmaras RANS models in two and three dimensions. Results for each case are compared with experimental measurements of the turbine shaft power, overall drag, mean velocity, turbulence kinetic energy, and momentum transport terms in the near-wake at one diameter downstream. It was shown that 2-D simulations overpredict turbine loading and do not resolve mean vertical momentum transport, which plays an important role in the near-wake's momentum balance. The 3-D simulations fared better at predicting performance, with the Spalart-Allmaras model predictions being closest to the experiments. The SST model more accurately predicted the turbulence kinetic energy while the Spalart-Allmaras model more closely matched the momentum transport terms in the near-wake. These results show the potential of blade-resolved RANS as a design tool and a way to "extrapolate" experimental flow field measurements.
△ Less
Submitted 6 May, 2016; v1 submitted 9 April, 2016;
originally announced April 2016.
