-
Autonomous Microscopy Experiments through Large Language Model Agents
Authors:
Indrajeet Mandal,
Jitendra Soni,
Mohd Zaki,
Morten M. Smedskjaer,
Katrin Wondraczek,
Lothar Wondraczek,
Nitya Nand Gosvami,
N. M. Anoop Krishnan
Abstract:
The emergence of large language models (LLMs) has accelerated the development of self-driving laboratories (SDLs) for materials research. Despite their transformative potential, current SDL implementations rely on rigid, predefined protocols that limit their adaptability to dynamic experimental scenarios across different labs. A significant challenge persists in measuring how effectively AI agents…
▽ More
The emergence of large language models (LLMs) has accelerated the development of self-driving laboratories (SDLs) for materials research. Despite their transformative potential, current SDL implementations rely on rigid, predefined protocols that limit their adaptability to dynamic experimental scenarios across different labs. A significant challenge persists in measuring how effectively AI agents can replicate the adaptive decision-making and experimental intuition of expert scientists. Here, we introduce AILA (Artificially Intelligent Lab Assistant), a framework that automates atomic force microscopy (AFM) through LLM-driven agents. Using AFM as an experimental testbed, we develop AFMBench-a comprehensive evaluation suite that challenges AI agents based on language models like GPT-4o and GPT-3.5 to perform tasks spanning the scientific workflow: from experimental design to results analysis. Our systematic assessment shows that state-of-the-art language models struggle even with basic tasks such as documentation retrieval, leading to a significant decline in performance in multi-agent coordination scenarios. Further, we observe that LLMs exhibit a tendency to not adhere to instructions or even divagate to additional tasks beyond the original request, raising serious concerns regarding safety alignment aspects of AI agents for SDLs. Finally, we demonstrate the application of AILA on increasingly complex experiments open-ended experiments: automated AFM calibration, high-resolution feature detection, and mechanical property measurement. Our findings emphasize the necessity for stringent benchmarking protocols before deploying AI agents as laboratory assistants across scientific disciplines.
△ Less
Submitted 18 December, 2024;
originally announced January 2025.
-
The Origin of Deformation Induced Topological Anisotropy in Silica Glass
Authors:
Sudheer Ganisetti,
Achraf Atila,
Julien Guénolé,
Aruna Prakash,
Jürgen Horbach,
Lothar Wondraczek,
Erik Bitzek
Abstract:
Oxide glasses with a network structure are omnipresent in daily life. Often, they are regarded as isotropic materials; however, structural anisotropy can be induced through processing in mechanical fields and leads to unique materials properties. Unfortunately, due to the lack of local, atomic-scale analysis methods, the microscopic mechanisms leading to anisotropy remained elusive. Using novel an…
▽ More
Oxide glasses with a network structure are omnipresent in daily life. Often, they are regarded as isotropic materials; however, structural anisotropy can be induced through processing in mechanical fields and leads to unique materials properties. Unfortunately, due to the lack of local, atomic-scale analysis methods, the microscopic mechanisms leading to anisotropy remained elusive. Using novel analysis methods on glasses generated by molecular dynamics simulations, this paper provides a microscopic understanding of topological anisotropy in silica (SiO$_2$) glass under mechanical loads. The anisotropy observed in silica glass originates from a preferred orientation of SiO$_4$ tetrahedra at both short- and medium-range levels that can be controlled via the mode of mechanical loading. The findings elucidate the relation between the deformation protocol and the resulting anisotropic structure of the silica network (involving both persistent and transient effects), and thus provide important insight for the design of oxide glasses with tailored materials properties.
△ Less
Submitted 26 June, 2023; v1 submitted 7 June, 2022;
originally announced June 2022.
-
Configurational Prigogine-Defay ratio
Authors:
Jean-Luc Garden,
Hervé Guillou,
Jacques Richard,
L. Wondraczek
Abstract:
Classically, the Prigogine-Defay (PD) ratio involves differences in isobaric volumic specific heat, isothermal compressibility and isobaric thermal expansion coefficient between a super-cooled liquid and the corresponding glass at the glass transition. However, determining such differences by extrapolation of coefficients that have been measured for super-cooled liquid and glassy state, respective…
▽ More
Classically, the Prigogine-Defay (PD) ratio involves differences in isobaric volumic specific heat, isothermal compressibility and isobaric thermal expansion coefficient between a super-cooled liquid and the corresponding glass at the glass transition. However, determining such differences by extrapolation of coefficients that have been measured for super-cooled liquid and glassy state, respectively, poses the problem that it does not take into account the non-equilibrium character of the glass transition. In this paper, we asses this old question by taking into account the gradual change of configurational contributions to the three thermodynamic coefficients upon varying temperature and pressure. Macroscopic non-equilibrium thermodynamics is applied to obtain a generalized form of the PD ratio. The classical PD ratio can then be taken as a particular case of this generalization. Under some assumptions, a configurational PD ratio (CPD ratio) can be expressed in terms of fictive temperature and fictive pressure what, hence, provides the possibility to experimentally verify this formalism. Noteworthy and differing from previous approaches towards the PD ratio, here, the glass transition is considered as non-isoaffine.
△ Less
Submitted 8 April, 2010;
originally announced April 2010.
-
Dynamic condensation of water at crack tips in fused silica glass
Authors:
M. Ciccotti,
M. George,
V. Ranieri,
L. Wondraczek,
C. Marliere
Abstract:
Water molecules play a fundamental role in the physics of slow crack propagation in glasses. It is commonly understood that, during stress-corrosion, water molecules that move in the crack cavity effectively reduce the bond strength at the strained crack tip and, thus, support crack propagation. Yet the details of the environmental condition at the crack tip in moist air are not well determined.…
▽ More
Water molecules play a fundamental role in the physics of slow crack propagation in glasses. It is commonly understood that, during stress-corrosion, water molecules that move in the crack cavity effectively reduce the bond strength at the strained crack tip and, thus, support crack propagation. Yet the details of the environmental condition at the crack tip in moist air are not well determined. In a previous work, we reported direct evidence of the presence of a 100 nm long liquid condensate at the crack tip in fused silica glass during very slow crack propagation (10^-9 to 10^-10 m/s). These observations are based on in-situ AFM phase imaging techniques applied on DCDC glass specimens in controlled atmosphere. Here, we discuss the physical origin of the AFM phase contrast between the liquid condensate and the glass surface in relation to tip-sample adhesion induced by capillary bridges. We then report new experimental data on the water condensation length increase with relative humidity in the atmosphere. The measured condensation lengths were much larger than what predicted using the Kelvin equation and expected geometry of the crack tip.
△ Less
Submitted 18 June, 2007; v1 submitted 19 April, 2007;
originally announced April 2007.
-
Real-time observation of non-equilibrium liquid condensate confined at tensile crack tips in oxide glasses
Authors:
L. Wondraczek,
M. Ciccotti,
A. Dittmar,
C. Oelgardt,
F. Celarie,
C. Marliere
Abstract:
Since crack propagation in oxide materials at low crack velocities is partly determined by chemical corrosion, proper knowledge of the crack tip chemistry is crucial for understanding fracture in these materials. Such knowledge can be obtained only from in situ studies because the processes that occur in the highly confined environment of the crack tip are very different from those that take pla…
▽ More
Since crack propagation in oxide materials at low crack velocities is partly determined by chemical corrosion, proper knowledge of the crack tip chemistry is crucial for understanding fracture in these materials. Such knowledge can be obtained only from in situ studies because the processes that occur in the highly confined environment of the crack tip are very different from those that take place at free surfaces, or that can be traced post mortem. We report the occurrence of hydrous liquid condensate between the two fracture surfaces in the vicinity of the tip of tensile cracks in silica. Observations are performed in real-time by means of atomic force microscopy (AFM) at continuously controlled crack velocities in the regime of stress corrosion. Condensate formation and changes in extent and shape are demonstrated for a wide range of macroscopic humidity at different crack speeds. Its liquid character is confirmed by the study of AFM phase-contrast data. It is believed that this evidence of a nanoscale liquid hydrous phase at the crack tip will enable novel insights in the chemistry of failure of oxide materials.
△ Less
Submitted 8 September, 2005;
originally announced September 2005.
