-
Novel Materials and Concepts for Next-Generation High Power Target Applications
Authors:
Kavin Ammigan,
Sujit Bidhar,
Frederique Pellemoine,
Vitaly Pronskikh,
David Pushka,
Katsuya Yonehara,
Robert Zwaska,
Adrien Couet,
Michael Moorehead,
Taku Ishida,
Shunsuke Makimura,
Christopher Densham,
Michael Fitton,
Eric Harvey-Fishenden,
Tristan Davenne,
David Jenkins,
Peter Loveridge,
Joe O'Dell,
Chris Rogers,
Dan Wilcox,
Marco Calviani,
Simone Gilardoni,
Francois-Xavier Nuiry,
Antonio Perillo-Marcone,
Nathan Bultman
, et al. (14 additional authors not shown)
Abstract:
Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materia…
▽ More
Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materials already limiting the scope of experiments, it is crucial to investigate novel target materials, technologies and concepts that will satisfy the requirements and maximize the physics benefits of future energy and intensity frontier experiments. This paper provides an overview of the related targetry R&D required over the next 10 years to support and enable future high-power accelerator target facilities.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Iterative Bayesian Monte Carlo for nuclear data evaluation
Authors:
E. Alhassan,
D. Rochman,
A. Vasiliev,
M. Wohlmuther,
M. Hursin,
A. J. Koning,
H. Ferroukhi
Abstract:
In this work, we explore the use of an iterative Bayesian Monte Carlo (IBM) procedure for nuclear data evaluation within a Talys Evaluated Nuclear data Library (TENDL) framework. In order to identify the model and parameter combinations that reproduce selected experimental data, different physical models implemented within the TALYS code, were sampled and varied simultaneously to produce random in…
▽ More
In this work, we explore the use of an iterative Bayesian Monte Carlo (IBM) procedure for nuclear data evaluation within a Talys Evaluated Nuclear data Library (TENDL) framework. In order to identify the model and parameter combinations that reproduce selected experimental data, different physical models implemented within the TALYS code, were sampled and varied simultaneously to produce random input files with unique model combinations. All the models considered were assumed to be equal a priori. Parameters to these models were then varied simultaneously using the TALYS code system to produce a set of random ENDF files which were processed into x-y tables for comparison with selected experimental data from the EXFOR database within a Bayesian framework. To improve our fit to experimental data, we iteratively update our 'best' file - the file that maximises the likelihood function - by re-sampling model parameters around this file. The method proposed has been applied for the evaluation of p+Cd-111 and Co-59 between 1 - 100 MeV incident energy region. Finally, the adjusted files were compared with experimental data from the EXFOR database as well as with evaluations from the TENDL-2017 and JENDL-4.0/HE nuclear data libraries.
△ Less
Submitted 16 March, 2020;
originally announced March 2020.
-
In search of the best nuclear data file for proton induced reactions: varying both models and their parameters
Authors:
E. Alhassan,
D. Rochman,
A. Vasiliev,
R. M. Bergmann,
M. Wohlmuther,
A. J. Koning,
H. Ferroukhi
Abstract:
A lot of research work has been carried out in fine tuning model parameters to reproduce experimental data for neutron induced reactions. This however is not the case for proton induced reactions where large deviations still exist between model calculations and experiments for some cross sections. In this work, we present a method for searching both the model and model parameter space in order to…
▽ More
A lot of research work has been carried out in fine tuning model parameters to reproduce experimental data for neutron induced reactions. This however is not the case for proton induced reactions where large deviations still exist between model calculations and experiments for some cross sections. In this work, we present a method for searching both the model and model parameter space in order to identify the 'best' nuclear reaction models with their parameter sets that reproduces carefully selected experimental data. Three sets of experimental data from EXFOR are used in this work: (1) cross sections of the target nucleus (2) cross sections of the residual nuclei and (3) angular distributions. Selected models and their parameters were varied simultaneously to produce a large set of random nuclear data files. The goodness of fit between our adjustments and experimental data was achieved by computing a global reduced chi square which took into consideration the above listed experimental data. The method has been applied for the adjustment of proton induced reactions on Co-59 between 1 to 100 MeV. The adjusted files obtained are compared with available experimental data and evaluations from other nuclear data libraries.
△ Less
Submitted 24 December, 2019;
originally announced December 2019.
-
Po-production in lead: A benchmark between Geant4, FLUKA and MCNPX
Authors:
Alfredo Ferrari,
Daniela Kiselev,
Tatsumi Koi,
Michael Wohlmuther,
Jean-Christophe Davide
Abstract:
On the last SATIF a comparison between the measured activities of the polonium isotopes Po-208, Po-209 and Po-210 and the simulated results using MCNPX2.7.0 was presented. The lead samples were cut from the SINQ spallation target at the Paul Scherrer Institut (PSI) and irradiated in 2000/2001 by 575 MeV protons. The Po-isotopes were separated using radiochemical methods by the group of D. Schumann…
▽ More
On the last SATIF a comparison between the measured activities of the polonium isotopes Po-208, Po-209 and Po-210 and the simulated results using MCNPX2.7.0 was presented. The lead samples were cut from the SINQ spallation target at the Paul Scherrer Institut (PSI) and irradiated in 2000/2001 by 575 MeV protons. The Po-isotopes were separated using radiochemical methods by the group of D. Schumann at PSI and measured. Choosing the default model in MCNPX, Bertini-Dresner, the prediction underestimated the measured activities by up to several orders of magnitude. Therefore the Liège intranuclear-cascade model (INCL4.6) coupled to the de-excitation model ABLA07 were implemented into MCNPX2.7.0 and very good agreement was found to the measurement. The reason for the disagreement was traced back to a suppression of alpha reactions on the lead isotopes leading to Po and neglecting the triton capture on Pb-208, which leads to Pb-210 and decays into Po-210 with a much longer life time (22.3 years) than the decay of Po-210 itself (138 days). The prediction of the Po-isotope activities turns out to be a sensitive test for models and codes as it requires the accurate treatment of reaction channels not only with neutrons, protons and pions but also with alphas and tritons, which are not considered in intra-nuclear cascade models of the first generation. Therefore it was decided to perform a benchmark by comparing the results obtained with MCNPX2.7.0 using INCL4.6/ABLA07 to the predictions of FLUKA and Geant4. Since the model of the SINQ spallation source requires an elaborate geometry a toy model was setup. The toy model has a simplified geometry preserving the main features of the original geometry. The results for the activities of the three Po-isotopes and Pb-210 as well as the energy spectra for alphas and tritons obtained with the three particle transport Monte Carlo codes are presented.
△ Less
Submitted 10 June, 2018;
originally announced June 2018.
-
Proton induced activity in graphite - comparison between measurement and simulation
Authors:
Daniela Kiselev,
Ryan Bergmann,
Dorothea Schumann,
Vadim Talanov,
Michael Wohlmuther
Abstract:
The Paul Scherrer Institut (PSI) operates the Meson production target stations E and M with 590 MeV protons at currents of up to 2.4 mA. Both targets consist of polycrystalline graphite and rotate with 1 Hz due to the high power deposition (40 kW at 2 mA) in Target E. The graphite wheel is regularly exchanged and disposed as radioactive waste after a maximum of 3 to 4 years in operation, which cor…
▽ More
The Paul Scherrer Institut (PSI) operates the Meson production target stations E and M with 590 MeV protons at currents of up to 2.4 mA. Both targets consist of polycrystalline graphite and rotate with 1 Hz due to the high power deposition (40 kW at 2 mA) in Target E. The graphite wheel is regularly exchanged and disposed as radioactive waste after a maximum of 3 to 4 years in operation, which corresponds to about 30 to 40 Ah of proton fluence. For disposal, the nuclide inventory of the long-lived isotopes (T(1/2) > 60 d) has to be calculated and reported to the authorities. Measurements of gamma emitters, as well as 3H, 10Be and 14C, were carried out using different techniques. The measured specific activities are compared to Monte Carlo particle transport simulations performed with MCNPX2.7.0 using the BERTINI-DRESNER-RAL (default model in MCNPX2.7.0) and INCL4.6/ABLA07 as nuclear reaction models.
△ Less
Submitted 9 June, 2018;
originally announced June 2018.
-
Solid deuterium surface degradation at ultracold neutron sources
Authors:
A. Anghel,
T. L. Bailey,
G. Bison,
B. Blau,
L. J. Broussard,
S. M. Clayton,
C. Cude-Woods,
M. Daum,
A. Hawari,
N. Hild,
P. Huffman,
T. M. Ito,
K. Kirch,
E. Korobkina,
B. Lauss,
K. Leung,
E. M. Lutz,
M. Makela,
G. Medlin,
C. L. Morris,
R. W. Pattie,
D. Ries,
A. Saunders,
P. Schmidt-Wellenburg,
V. Talanov
, et al. (5 additional authors not shown)
Abstract:
Solid deuterium (sD_2) is used as an efficient converter to produce ultracold neutrons (UCN). It is known that the sD_2 must be sufficiently cold, of high purity and mostly in its ortho-state in order to guarantee long lifetimes of UCN in the solid from which they are extracted into vacuum. Also the UCN transparency of the bulk sD_2 material must be high because crystal inhomogeneities limit the m…
▽ More
Solid deuterium (sD_2) is used as an efficient converter to produce ultracold neutrons (UCN). It is known that the sD_2 must be sufficiently cold, of high purity and mostly in its ortho-state in order to guarantee long lifetimes of UCN in the solid from which they are extracted into vacuum. Also the UCN transparency of the bulk sD_2 material must be high because crystal inhomogeneities limit the mean free path for elastic scattering and reduce the extraction efficiency. Observations at the UCN sources at Paul Scherrer Institute and at Los Alamos National Laboratory consistently show a decrease of the UCN yield with time of operation after initial preparation or later treatment (`conditioning') of the sD_2. We show that, in addition to the quality of the bulk sD_2, the quality of its surface is essential. Our observations and simulations support the view that the surface is deteriorating due to a build-up of D_2 frost-layers under pulsed operation which leads to strong albedo reflections of UCN and subsequent loss. We report results of UCN yield measurements, temperature and pressure behavior of deuterium during source operation and conditioning, and UCN transport simulations. This, together with optical observations of sD_2 frost formation on initially transparent sD_2 in offline studies with pulsed heat input at the North Carolina State University UCN source results in a consistent description of the UCN yield decrease.
△ Less
Submitted 28 August, 2018; v1 submitted 23 April, 2018;
originally announced April 2018.
-
Target Studies for Surface Muon Production
Authors:
F. Berg,
L. Desorgher,
A. Fuchs,
W. Hajdas,
Z. Hodge,
P. -R. Kettle,
A. Knecht,
R. Lüscher,
A. Papa,
G. Rutar,
M. Wohlmuther
Abstract:
Meson factories are powerful drivers of diverse physics programmes. With beam powers already in the MW-regime attention has to be turned to target and beam line design to further significantly increase surface muon rates available for experiments. For this reason we have explored the possibility of using a neutron spallation target as a source of surface muons by performing detailed Geant4 simulat…
▽ More
Meson factories are powerful drivers of diverse physics programmes. With beam powers already in the MW-regime attention has to be turned to target and beam line design to further significantly increase surface muon rates available for experiments. For this reason we have explored the possibility of using a neutron spallation target as a source of surface muons by performing detailed Geant4 simulations with pion production cross sections based on a parametrization of existing data. While the spallation target outperforms standard targets in the backward direction by more than a factor 7 it is not more efficient than standard targets viewed under 90°. Not surprisingly, the geometry of the target plays a large role in the generation of surface muons. Through careful optimization, a gain in surface muon rate of between 30 - 60% over the standard "box-like" target used at the Paul Scherrer Institute could be achieved by employing a rotated slab target. An additional 10% gain could also be possible by utilizing novel target materials such as, e.g., boron carbide.
△ Less
Submitted 23 February, 2016; v1 submitted 4 November, 2015;
originally announced November 2015.
-
Neutron production and thermal moderation at the PSI UCN source
Authors:
H. Becker,
G. Bison,
B. Blau,
Z. Chowdhuri,
J. Eikenberg,
M. Fertl,
K. Kirch,
B. Lauss,
G. Perret,
D. Reggiani,
D. Ries,
P. Schmidt-Wellenburg,
V. Talanov,
M. Wohlmuther,
G. Zsigmond
Abstract:
We report on gold foil activation measurements performed along a vertical channel along the tank of the ultracold neutron source at the Paul Scherrer Institute. The activities obtained at various distances from the spallation target are in very good agreement with MCNPX simulations which take into account the detailed description of the source as built.
We report on gold foil activation measurements performed along a vertical channel along the tank of the ultracold neutron source at the Paul Scherrer Institute. The activities obtained at various distances from the spallation target are in very good agreement with MCNPX simulations which take into account the detailed description of the source as built.
△ Less
Submitted 14 August, 2014;
originally announced August 2014.
