-
Impacting the dayside Martian ionosphere from above and below: Effects of the impact of CIRs and ICMEs close to aphelion (April 2021) and during dust storms (June-July 2022) seen with MAVEN ROSE
Authors:
Marianna Felici,
Jennifer Segale,
Paul Withers,
Christina O. Lee,
Andrea Hughes,
Ed Thiemann,
Steve Bougher,
Candace Grey,
Shannon Curry
Abstract:
We use 62 electron density profiles collected by the Radio Occultation Science Experiment (ROSE), on MAVEN, when Mars was hit by CIRs and ICMEs close to aphelion (April 2021) and during two dust storms (June-July 2022) to examine the response of the Martian ionosphere to solar events and to solar events hitting during dust storms. We do so through three proxies - variation in total electron conten…
▽ More
We use 62 electron density profiles collected by the Radio Occultation Science Experiment (ROSE), on MAVEN, when Mars was hit by CIRs and ICMEs close to aphelion (April 2021) and during two dust storms (June-July 2022) to examine the response of the Martian ionosphere to solar events and to solar events hitting during dust storms. We do so through three proxies - variation in total electron content between 80 and 300 km altitude, peak density, and peak altitude - of the aforementioned 62 ROSE electron density profiles, relative to a characterisation of the ionosphere through solar minimum leading to solar maximum, specific to local time sector and season, presented in Segale et al., (COMPANION). We observe an increased Total Electron Content (TEC) between 80 and 300 km altitude up to 2.5 x 10(15) m(-2) in April 2021 and up to 5 x 10(15) m(-2) in June-July 2022 compared to the baseline photochemically produced ionosphere. This increase in TEC corresponds mainly to increases in the solar energetic particles flux (detected by MAVEN SEP) and electron fluxes (detected by MAVEN SWEA). In addition to solar events, in June-July 2022, an A storm and a B storm were occurring and merging on the surface of Mars. We observe a raise in peak altitude in general lower than expected during dust storms, possibly due to high values of solar wind dynamic pressure (derived from MAVEN SWIA). From 31 ROSE profiles collected in this time period that showed both the M2 and M1 layer, we observe that, on average, M1 and M2 peak altitudes raise the same amount, suggesting that the thermosphere might loft as a unit during dust storms. During this time period, several proton aurora events of variable brightness were detected with MAVEN IUVS underlining the complex and multifaceted impact of dust activity and extreme solar activity on the Martian ionosphere.
△ Less
Submitted 23 April, 2024;
originally announced April 2024.
-
Exploring descriptors for titanium microstructure via digital fingerprints from variational autoencoders
Authors:
Michael D. White,
Gowtham Nimmal Haribabu,
Jeyapriya Thimukonda Jegadeesan,
Bikramjit Basu,
Philip J. Withers,
Chris P. Race
Abstract:
Microstructure is key to controlling and understanding the properties of metallic materials, but traditional approaches to describing microstructure capture only a small number of features. To enable data-centric approaches to materials discovery, allow efficient storage of microstructural data and assist in quality control in metals processing, we require more complete descriptors of microstructu…
▽ More
Microstructure is key to controlling and understanding the properties of metallic materials, but traditional approaches to describing microstructure capture only a small number of features. To enable data-centric approaches to materials discovery, allow efficient storage of microstructural data and assist in quality control in metals processing, we require more complete descriptors of microstructure. The concept of microstructural fingerprinting, using machine learning (ML) to develop quantitative, low-dimensional descriptors of microstructures, has recently attracted significant attention. However, it is difficult to interpret conclusions drawn by ML algorithms, which are commonly referred to as "black boxes".
Here we explore variational autoencoders (VAEs), which can be trained to produce microstructural fingerprints in a continuous latent space. VAEs enable the reconstruction of images from fingerprints, allowing us to explore how key features of microstructure are encoded. We develop a VAE architecture based on ResNet18 and train it on Ti-6Al-4V optical micrographs as an example of an industrially important alloy where microstructural control is critical to performance. The latent space is explored in several ways, including by supplying interpolated and randomly perturbed fingerprints to the trained decoder and via dimensionality reduction to explore the distribution of microstructural features within the latent space of fingerprints. We show that the VAE fingerprints exhibit smooth, interpolable behaviour with stability to local perturbations, supporting their suitability as general purpose descriptors for microstructure. We also show that key properties of the microstructures are strongly correlated with position in the latent space, supporting the use of VAE fingerprints for quantitative exploration of process-structure-property relationships.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Characterization of the M1 and M2 layers in the undisturbed Martian ionosphere through solar minimum leading to solar maximum with MAVEN ROSE
Authors:
Jennifer Segale,
Marianna Felici,
Paul Withers,
Shannon Curry
Abstract:
We utilize data from the MAVEN Radio Occultation Science Experiment (Withers et al., 2020) - with unprecedented coverage in solar zenith angle - to isolate the effects that local time and season induce on the photochemical ionosphere of Mars around solar minimum, leading to solar maximum. 219 out of the 1228 electron density profiles of the Martian undisturbed - by solar events or dust storm - day…
▽ More
We utilize data from the MAVEN Radio Occultation Science Experiment (Withers et al., 2020) - with unprecedented coverage in solar zenith angle - to isolate the effects that local time and season induce on the photochemical ionosphere of Mars around solar minimum, leading to solar maximum. 219 out of the 1228 electron density profiles of the Martian undisturbed - by solar events or dust storm - dayside ionosphere collected by MAVEN ROSE between July 2016 and December 2022 show a distinct M1 layer below the M2 layer. This allowed us to study the behavior of both the M2 and M1 peak densities and altitudes as a function of solar zenith angle, and, for the first time, to be able to separate these trends in dusk and dawn local time, as well as by Southern Spring and summer versus Southern Fall and Winter. We find that the M1 layer at small SZA can occur at altitudes lower than 100 km; that the peak altitudes and densities of both the M2 and M1 layers at dawn change more with season than they do at dusk; and that the M2 peak density decreases at a faster rate than the M1 with SZA.
△ Less
Submitted 10 May, 2024; v1 submitted 1 December, 2023;
originally announced December 2023.
-
Martian M2 peak behavior in the dayside near-terminator ionosphere during interplanetary coronal mass ejections
Authors:
L. Ram,
D. Rout,
R. Rathi,
P. Withers,
S. Sarkhel
Abstract:
The interplanetary coronal mass ejections (ICMEs) can pose significant impacts on the Martian ionosphere, resulting in plasma depletion, variability, and escape to space. However, the connections between the ICMEs and the associated responses of the dayside near-terminator Martian ionospheric primary peak (M2) are not well understood. The present study primarily investigates the behavior of the io…
▽ More
The interplanetary coronal mass ejections (ICMEs) can pose significant impacts on the Martian ionosphere, resulting in plasma depletion, variability, and escape to space. However, the connections between the ICMEs and the associated responses of the dayside near-terminator Martian ionospheric primary peak (M2) are not well understood. The present study primarily investigates the behavior of the ionospheric peak density (Nm) and height (hm) during the passage of ICMEs using observations from the Radio Occultation Science Experiment (ROSE) aboard MAVEN spacecraft. We have selected 8 such ICMEs (during 2017-2022) at Mars from the existing catalogs and studied the ROSE electron density profiles during quiet and disturbed time (ICMEs) for identical solar zenith angle range. We observed the elevation of the M2 peak (hm ~4-16 km) during disturbed time (ICMEs) with a decrease in Nm (0.41-2.8*10^10 m-3) in comparison to the quiet time. The present study, for the first time, addressed the influence of ICMEs on the M2 peak parameters (Nm and hm). We have proposed that the development of large vertical pressure gradient and electron temperature enhancement are plausible causes for ionospheric variability. Therefore, the present study provides new insights to understand peak plasma behavior in the dayside near-terminator ionosphere during ICMEs.
△ Less
Submitted 5 November, 2023; v1 submitted 16 August, 2023;
originally announced August 2023.
-
High Resolution 3D Strain and Orientation Mapping within a Grain of a Directed Energy Deposition Laser Additively Manufactured Superalloy
Authors:
Y. Chen,
Y. T. Tang,
D. M. Collins,
S. J. Clark,
W. Ludwig,
R. Rodriguez-Lamas,
C. Detlefs,
R. C. Reed,
P. D. Lee,
P. J. Withers,
C. Yildirim
Abstract:
The industrialization of Laser Additive Manufacturing (LAM) is challenged by the undesirable microstructures and high residual stresses originating from the fast and complex solidification process. Non-destructive assessment of the mechanical performance controlling deformation patterning is therefore critical. Here, we use Dark Field X-ray Microscopy (DFXM) to non-destructively map the 3D intragr…
▽ More
The industrialization of Laser Additive Manufacturing (LAM) is challenged by the undesirable microstructures and high residual stresses originating from the fast and complex solidification process. Non-destructive assessment of the mechanical performance controlling deformation patterning is therefore critical. Here, we use Dark Field X-ray Microscopy (DFXM) to non-destructively map the 3D intragranular orientation and strain variations throughout a surface breaking grain within a directed energy deposition nickel superalloy. DFXM results reveal a highly heterogenous 3D microstructure in terms of the local orientation and lattice strain. The grain comprises $\approx$ 5$μ$m-sized cells with alternating strain states, as high as 5 $\times 10^{-3}$, and orientation differences <0.5° . The DFXM results are compared to Electron Backscatter Diffraction measurements of the same grain from its cut-off surface. We discuss the microstructure developments during LAM, rationalising the development of the deformation patterning from the extreme thermal gradients during processing and the susceptibility for solute segregation.
△ Less
Submitted 8 March, 2023;
originally announced March 2023.
-
Io's Optical Aurorae in Jupiter's Shadow
Authors:
Carl Schmidt,
Mikhail Sharov,
Katherine de Kleer,
Nick Schneider,
Imke de Pater,
Phillip H. Phipps,
Albert Conrad,
Luke Moore,
Paul Withers,
John Spencer,
Jeff Morgenthaler,
Ilya Ilyin,
Klaus Strassmeier,
Christian Veillet,
John Hill,
Mike Brown
Abstract:
Decline and recovery timescales surrounding eclipse are indicative of the controlling physical processes in Io's atmosphere. Recent studies have established that the majority of Io's molecular atmosphere, SO2 and SO, condenses during its passage through Jupiter's shadow. The eclipse response of Io's atomic atmosphere is less certain, having been characterized solely by ultraviolet aurorae. Here we…
▽ More
Decline and recovery timescales surrounding eclipse are indicative of the controlling physical processes in Io's atmosphere. Recent studies have established that the majority of Io's molecular atmosphere, SO2 and SO, condenses during its passage through Jupiter's shadow. The eclipse response of Io's atomic atmosphere is less certain, having been characterized solely by ultraviolet aurorae. Here we explore the response of optical aurorae for the first time. We find oxygen to be indifferent to the changing illumination, with [O I] brightness merely tracking the plasma density at Io's position in the torus. In shadow, line ratios confirm sparse SO2 coverage relative to O, since their collisions would otherwise quench the emission. Io's sodium aurora mostly disappears in eclipse and e-folding timescales, for decline and recovery differ sharply: ~10 minutes at ingress and nearly 2 hr at egress. Only ion chemistry can produce such a disparity; Io's molecular ionosphere is weaker at egress due to rapid recombination. Interruption of a NaCl+ photochemical pathway best explains Na behavior surrounding eclipse, implying that the role of electron impact ionization is minor relative to photons. Auroral emission is also evident from potassium, confirming K as the major source of far red emissions seen with spacecraft imaging at Jupiter. In all cases, direct electron impact on atomic gas is sufficient to explain the brightness without invoking significant dissociative excitation of molecules. Surprisingly, the nonresponse of O and rapid depletion of Na is opposite the temporal behavior of their SO2 and NaCl parent molecules during Io's eclipse phase.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
Jupiter's Temperature Structure: A Reassessment of the Voyager Radio Occultation Measurements
Authors:
Pranika Gupta,
Sushil K. Atreya,
Paul G. Steffes,
Leigh N. Fletcher,
Tristan Guillot,
Michael D. Allison,
Scott J. Bolton,
Ravit Helled,
Steven Levin,
Cheng Li,
Jonathan I. Lunine,
Yamila Miguel,
Glenn S. Orton,
J. Hunter Waite,
Paul Withers
Abstract:
The thermal structure of planetary atmospheres is an essential input for predicting and retrieving the distribution of gases and aerosols, as well as the bulk chemical abundances. In the case of Jupiter, the temperature at a reference level - generally taken at 1 bar - serves as the anchor in models used to derive the planet's interior structure and composition. Most models assume the temperature…
▽ More
The thermal structure of planetary atmospheres is an essential input for predicting and retrieving the distribution of gases and aerosols, as well as the bulk chemical abundances. In the case of Jupiter, the temperature at a reference level - generally taken at 1 bar - serves as the anchor in models used to derive the planet's interior structure and composition. Most models assume the temperature measured by the Galileo probe (Seiff et al. 1998). However, those data correspond to a single location, an unusually clear, dry region, affected by local atmospheric dynamics. On the other hand, the Voyager radio occultation observations cover a wider range of latitudes, longitudes, and times (Lindal et al. 1981). The Voyager retrievals were based on atmospheric composition and radio refractivity data that require updating and were never properly tabulated: the few existing tabulations are incomplete and ambiguous. Here, we present a systematic electronic digitization of all available temperature profiles from Voyager, followed by their reanalysis, employing currently accepted values of the abundances and radio refractivities of atmospheric species. We find the corrected temperature at the 1 bar level to be up to 4 K greater than previously published values, i.e., 170.3{\pm}3.8 K at 12°S (Voyager 1 ingress) and 167.3{\pm}3.8 K at 0°N (Voyager 1 egress). This is to be compared with the Galileo probe value of 166.1{\pm}0.8 K at the edge of an unusual feature at 6.57°N. Altogether, this suggests that Jupiter's tropospheric temperatures may vary spatially by up to 7 K between 7°N and 12°S.
△ Less
Submitted 14 July, 2022; v1 submitted 25 May, 2022;
originally announced May 2022.
-
Digital Fingerprinting of Microstructures
Authors:
Michael D. White,
Alexander Tarakanov,
Christopher P. Race,
Philip J. Withers,
Kody J. H. Law
Abstract:
Finding efficient means of fingerprinting microstructural information is a critical step towards harnessing data-centric machine learning approaches. A statistical framework is systematically developed for compressed characterisation of a population of images, which includes some classical computer vision methods as special cases. The focus is on materials microstructure. The ultimate purpose is t…
▽ More
Finding efficient means of fingerprinting microstructural information is a critical step towards harnessing data-centric machine learning approaches. A statistical framework is systematically developed for compressed characterisation of a population of images, which includes some classical computer vision methods as special cases. The focus is on materials microstructure. The ultimate purpose is to rapidly fingerprint sample images in the context of various high-throughput design/make/test scenarios. This includes, but is not limited to, quantification of the disparity between microstructures for quality control, classifying microstructures, predicting materials properties from image data and identifying potential processing routes to engineer new materials with specific properties. Here, we consider microstructure classification and utilise the resulting features over a range of related machine learning tasks, namely supervised, semi-supervised, and unsupervised learning.
The approach is applied to two distinct datasets to illustrate various aspects and some recommendations are made based on the findings. In particular, methods that leverage transfer learning with convolutional neural networks (CNNs), pretrained on the ImageNet dataset, are generally shown to outperform other methods. Additionally, dimensionality reduction of these CNN-based fingerprints is shown to have negligible impact on classification accuracy for the supervised learning approaches considered. In situations where there is a large dataset with only a handful of images labelled, graph-based label propagation to unlabelled data is shown to be favourable over discarding unlabelled data and performing supervised learning. In particular, label propagation by Poisson learning is shown to be highly effective at low label rates.
△ Less
Submitted 22 January, 2024; v1 submitted 25 March, 2022;
originally announced March 2022.
-
Recovering the second moment of the strain distribution from neutron Bragg edge data
Authors:
Kyle Fogarty,
Evelina Ametova,
Genoveva Burca,
Alexander M. Korsunsky,
Søren Schmidt,
Philip J. Withers,
William R. B. Lionheart
Abstract:
Point by point strain scanning is often used to map the residual stress (strain) in engineering materials and components. However, the gauge volume and hence spatial resolution is limited by the beam defining apertures and can be anisotropic for very low and high diffraction (scattering) angles. Alternatively, wavelength resolved neutron transmission imaging has a potential to retrieve information…
▽ More
Point by point strain scanning is often used to map the residual stress (strain) in engineering materials and components. However, the gauge volume and hence spatial resolution is limited by the beam defining apertures and can be anisotropic for very low and high diffraction (scattering) angles. Alternatively, wavelength resolved neutron transmission imaging has a potential to retrieve information tomographically about residual strain induced within materials through measurement in transmission of Bragg edges - crystallographic fingerprints whose locations and shapes depend on microstructure and strain distribution. In such a case the spatial resolution is determined by the geometrical blurring of the measurement setup and the detector point spread function. Mathematically, reconstruction of strain tensor field is described by the longitudinal ray transform; this transform has a non-trivial null-space, making direct inversion impossible. A combination of the longitudinal ray transform with physical constraints was used to reconstruct strain tensor fields in convex objects. To relax physical constraints and generalise reconstruction, a recently introduced concept of histogram tomography can be employed. Histogram tomography relies on our ability to resolve the distribution of strain in the beam direction, as we discuss in the paper. More specifically, Bragg edge strain tomography requires extraction of the second moment (variance about zero) of the strain distribution which has not yet been demonstrated in practice. In this paper we verify experimentally that the second moment can be reliably measured for a previously well characterised aluminium ring and plug sample. We compare experimental measurements against numerical calculation and further support our conclusions by rigorous uncertainty quantification of the estimated mean and variance of the strain distribution.
△ Less
Submitted 29 March, 2022; v1 submitted 17 January, 2022;
originally announced January 2022.
-
Enhanced hyperspectral tomography for bioimaging by spatiospectral reconstruction
Authors:
Ryan Warr,
Evelina Ametova,
Robert J. Cernik,
Gemma Fardell,
Stephan Handschuh,
Jakob S. Jørgensen,
Evangelos Papoutsellis,
Edoardo Pasca,
Philip J. Withers
Abstract:
Here we apply hyperspectral bright field imaging to collect computed tomographic images with excellent energy resolution (800 eV), applying it for the first time to map the distribution of stain in a fixed biological sample through its characteristic K-edge. Conventionally, because the photons detected at each pixel are distributed across as many as 200 energy channels, energy-selective images are…
▽ More
Here we apply hyperspectral bright field imaging to collect computed tomographic images with excellent energy resolution (800 eV), applying it for the first time to map the distribution of stain in a fixed biological sample through its characteristic K-edge. Conventionally, because the photons detected at each pixel are distributed across as many as 200 energy channels, energy-selective images are characterised by low count-rates and poor signal-to-noise ratio. This means high X-ray exposures, long scan times and high doses are required to image unique spectral markers. Here, we achieve high quality energy-dispersive tomograms from low dose, noisy datasets using a dedicated iterative reconstruction algorithm. This exploits the spatial smoothness and inter-channel structural correlation in the spectral domain using two carefully chosen regularisation terms. For a multi-phase phantom, a reduction in scan time of 36 times is demonstrated. Spectral analysis methods including K-edge subtraction and absorption step-size fitting are evaluated for an ex vivo, single (iodine)-stained biological sample, where low chemical concentration and inhomogeneous distribution can affect soft tissue segmentation and visualisation. The reconstruction algorithms are available through the open-source Core Imaging Library. Taken together, these tools offer new capabilities for visualisation and elemental mapping, with promising applications for multiply-stained biological specimens.
△ Less
Submitted 8 March, 2021;
originally announced March 2021.
-
Damage accumulation during high temperature fatigue of Ti/SiC$_f$ metal matrix composites under different stress amplitudes
Authors:
Ying Wang,
Xu Xu,
Wenxia Zhao,
Nan Li,
Samuel A. McDonald,
Yuan Chai,
Michael Atkinson,
Katherine J. Dobson,
Stefan Michalik,
Yingwei Fan,
Philip J. Withers,
Xiaorong Zhou,
Timothy L. Burnett
Abstract:
The damage mechanisms and load redistribution of high strength TC17 titanium alloy/unidirectional SiC fibre composite (fibre diameter = 100 $μ$m) under high temperature (350 °C) fatigue cycling have been investigated in situ using synchrotron X-ray computed tomography (CT) and X-ray diffraction (XRD) for high cycle fatigue (HCF) under different stress amplitudes. The three-dimensional morphology o…
▽ More
The damage mechanisms and load redistribution of high strength TC17 titanium alloy/unidirectional SiC fibre composite (fibre diameter = 100 $μ$m) under high temperature (350 °C) fatigue cycling have been investigated in situ using synchrotron X-ray computed tomography (CT) and X-ray diffraction (XRD) for high cycle fatigue (HCF) under different stress amplitudes. The three-dimensional morphology of the crack and fibre fractures has been mapped by CT. During stable growth, matrix cracking dominates with the crack deflecting (by 50-100 $μ$m in height) when bypassing bridging fibres. A small number of bridging fibres have fractured close to the matrix crack plane especially under relatively high stress amplitude cycling. Loading to the peak stress led to rapid crack growth accompanied by a burst of fibre fractures. Many of the fibre fractures occurred 50-300 $μ$m from the matrix crack plane during rapid growth, in contrast to that in the stable growth stage, leading to extensive fibre pull-out on the fracture surface. The changes in fibre loading, interfacial stress, and the extent of fibre-matrix debonding in the vicinity of the crack have been mapped for the fatigue cycle and after the rapid growth by high spatial resolution XRD. The fibre/matrix interfacial sliding extends up to 600 $μ$m (in the stable growth zone) or 700 $μ$m (in the rapid growth zone) either side of the crack plane. The direction of interfacial shear stress reverses with the loading cycle, with the maximum frictional sliding stress reaching ~55 MPa in both the stable growth and rapid growth regimes.
△ Less
Submitted 26 February, 2021;
originally announced February 2021.
-
Crystalline phase discriminating neutron tomography using advanced reconstruction methods
Authors:
Evelina Ametova,
Genoveva Burca,
Suren Chilingaryan,
Gemma Fardell,
Jakob S. Jørgensen,
Evangelos Papoutsellis,
Edoardo Pasca,
Ryan Warr,
Martin Turner,
William R. B. Lionheart,
Philip J. Withers
Abstract:
Time-of-flight neutron imaging offers complementary attenuation contrast to X-ray computed tomography (CT), coupled with the ability to extract additional information from the variation in attenuation as a function of neutron energy (time of flight) at every point (voxel) in the image. In particular Bragg edge positions provide crystallographic information and therefore enable the identification o…
▽ More
Time-of-flight neutron imaging offers complementary attenuation contrast to X-ray computed tomography (CT), coupled with the ability to extract additional information from the variation in attenuation as a function of neutron energy (time of flight) at every point (voxel) in the image. In particular Bragg edge positions provide crystallographic information and therefore enable the identification of crystalline phases directly. Here we demonstrate Bragg edge tomography with high spatial and spectral resolution. We propose a new iterative tomographic reconstruction method with a tailored regularisation term to achieve high quality reconstruction from low-count data, where conventional filtered back-projection (FBP) fails. The regularisation acts in a separated mode for spatial and spectral dimensions and favours characteristic piece-wise constant and piece-wise smooth behaviour in the respective dimensions. The proposed method is compared against FBP and a state-of-the-art regulariser for multi-channel tomography on a multi-material phantom. The proposed new regulariser which accommodates specific image properties outperforms both conventional and state-of-the-art methods and therefore facilitates Bragg edge fitting at the voxel level. The proposed method requires significantly shorter exposure to retrieve features of interest. This in turn facilitates more efficient usage of expensive neutron beamline time and enables the full utilisation of state-of-the-art high resolution detectors.
△ Less
Submitted 12 February, 2021;
originally announced February 2021.
-
Core Imaging Library -- Part II: Multichannel reconstruction for dynamic and spectral tomography
Authors:
Evangelos Papoutsellis,
Evelina Ametova,
Claire Delplancke,
Gemma Fardell,
Jakob S. Jørgensen,
Edoardo Pasca,
Martin Turner,
Ryan Warr,
William R. B. Lionheart,
Philip J. Withers
Abstract:
The newly developed Core Imaging Library (CIL) is a flexible plug and play library for tomographic imaging with a specific focus on iterative reconstruction. CIL provides building blocks for tailored regularised reconstruction algorithms and explicitly supports multichannel tomographic data. In the first part of this two-part publication, we introduced the fundamentals of CIL. This paper focuses o…
▽ More
The newly developed Core Imaging Library (CIL) is a flexible plug and play library for tomographic imaging with a specific focus on iterative reconstruction. CIL provides building blocks for tailored regularised reconstruction algorithms and explicitly supports multichannel tomographic data. In the first part of this two-part publication, we introduced the fundamentals of CIL. This paper focuses on applications of CIL for multichannel data, e.g., dynamic and spectral. We formalise different optimisation problems for colour processing, dynamic and hyperspectral tomography and demonstrate CIL's capabilities for designing state of the art reconstruction methods through case studies and code snapshots.
△ Less
Submitted 28 May, 2021; v1 submitted 10 February, 2021;
originally announced February 2021.
-
Core Imaging Library -- Part I: a versatile Python framework for tomographic imaging
Authors:
Jakob S. Jørgensen,
Evelina Ametova,
Genoveva Burca,
Gemma Fardell,
Evangelos Papoutsellis,
Edoardo Pasca,
Kris Thielemans,
Martin Turner,
Ryan Warr,
William R. B. Lionheart,
Philip J. Withers
Abstract:
We present the Core Imaging Library (CIL), an open-source Python framework for tomographic imaging with particular emphasis on reconstruction of challenging datasets. Conventional filtered back-projection reconstruction tends to be insufficient for highly noisy, incomplete, non-standard or multi-channel data arising for example in dynamic, spectral and in situ tomography. CIL provides an extensive…
▽ More
We present the Core Imaging Library (CIL), an open-source Python framework for tomographic imaging with particular emphasis on reconstruction of challenging datasets. Conventional filtered back-projection reconstruction tends to be insufficient for highly noisy, incomplete, non-standard or multi-channel data arising for example in dynamic, spectral and in situ tomography. CIL provides an extensive modular optimisation framework for prototyping reconstruction methods including sparsity and total variation regularisation, as well as tools for loading, preprocessing and visualising tomographic data. The capabilities of CIL are demonstrated on a synchrotron example dataset and three challenging cases spanning golden-ratio neutron tomography, cone-beam X-ray laminography and positron emission tomography.
△ Less
Submitted 27 May, 2021; v1 submitted 8 February, 2021;
originally announced February 2021.
-
Extra-Terrestrial Meteors
Authors:
Apostolos Christou,
Jeremie Vaubaillon,
Paul Withers,
Ricardo Hueso,
Rosemary Killen
Abstract:
All planets and satellites of our solar system are subject to a continuous rain of material, ranging in size from specks of dust to objects the size of boulders. Upon impact, these objects deposit their kinetic energy into the incident surface or atmosphere and affect the environment of the target body in ways not yet well understood. Recent high-profile events - impact flashes on Jupiter and the…
▽ More
All planets and satellites of our solar system are subject to a continuous rain of material, ranging in size from specks of dust to objects the size of boulders. Upon impact, these objects deposit their kinetic energy into the incident surface or atmosphere and affect the environment of the target body in ways not yet well understood. Recent high-profile events - impact flashes on Jupiter and the encounter of comet C/Siding Spring with Mars - brought the study of "extraterrestrial meteors" and their effects into the fore. Here we review the history, status and future prospects of meteor studies on planets other than the Earth. Would bright meteors appear in the atmosphere of Mars and what are the long-term effects on the planet's atmosphere? How do high-speed impacts of particulate matter on the airless surfaces of Mercury and the Moon affect their environment and those of the countless other bodies like them? These are some of the questions we attempt to answer in this Chapter.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
Exoplanet Transits with Next-Generation Radio Telescopes
Authors:
Benjamin J. S. Pope,
Paul Withers,
Joseph R. Callingham,
Marissa F. Vogt
Abstract:
Nearly everything we know about extrasolar planets to date comes from optical astronomy. While exoplanetary aurorae are predicted to be bright at low radio frequencies (< 1 GHz), we consider the effect of an exoplanet transit on radio emission from the host star. As radio emission from solar-like stars is concentrated in active regions, a planet occulting a starspot can cause a disproportionately…
▽ More
Nearly everything we know about extrasolar planets to date comes from optical astronomy. While exoplanetary aurorae are predicted to be bright at low radio frequencies (< 1 GHz), we consider the effect of an exoplanet transit on radio emission from the host star. As radio emission from solar-like stars is concentrated in active regions, a planet occulting a starspot can cause a disproportionately deep transit which should be detectable with major radio arrays currently under development, such as the Square Kilometre Array (SKA). We calculate the radiometric sensitivity of the SKA stages and components, finding that SKA2-Mid can expect to detect transits around the very nearest solar-like stars and many cool dwarfs. The shape of this radiometric light curve will be affected by scintillation and lensing from the planet's magnetosphere and thereby encode magnetospheric parameters. Furthermore, these transits will also probe the distribution of stellar activity across a star's surface, and will help scrub out contamination from stellar activity on exoplanet transmission spectra and radial velocity spectra. This radio window on exoplanets and their host stars is therefore a valuable complement to existing optical tools.
△ Less
Submitted 26 October, 2018;
originally announced October 2018.
-
MARSIS observations of field-aligned irregularities and ducted radio propagation in the Martian ionosphere
Authors:
David J. Andrews,
Hermann J. Opgenoorth,
Thomas B. Leyser,
Stephan Buchert,
Niklas J. T. Edberg,
David D. Morgan,
Donald A. Gurnett,
Andrew J. Kopf,
Katy Fallows,
Paul Withers
Abstract:
Knowledge of Mars's ionosphere has been significantly advanced in recent years by observations from Mars Express (MEX) and lately MAVEN. A topic of particular interest are the interactions between the planet's ionospheric plasma and its highly structured crustal magnetic fields, and how these lead to the redistribution of plasma and affect the propagation of radio waves in the system. In this pape…
▽ More
Knowledge of Mars's ionosphere has been significantly advanced in recent years by observations from Mars Express (MEX) and lately MAVEN. A topic of particular interest are the interactions between the planet's ionospheric plasma and its highly structured crustal magnetic fields, and how these lead to the redistribution of plasma and affect the propagation of radio waves in the system. In this paper, we elucidate a possible relationship between two anomalous radar signatures previously reported in observations from the MARSIS instrument on MEX. Relatively uncommon observations of localized, extreme increases in the ionospheric peak density in regions of radial (cusp-like) magnetic fields and spread-echo radar signatures are shown to be coincident with ducting of the same radar pulses at higher altitudes on the same field lines. We suggest that these two observations are both caused by a high electric field (perpendicular to $\mathbf{B}$) having distinctly different effects in two altitude regimes. At lower altitudes, where ions are demagnetized and electrons magnetized, and recombination dominantes, a high electric field causes irregularities, plasma turbulence, electron heating, slower recombination and ultimately enhanced plasma densities. However, at higher altitudes, where both ions and electrons are magnetized and atomic oxygen ions cannot recombine directly, the high electric field instead causes frictional heating, a faster production of molecular ions by charge exchange, and so a density decrease. The latter enables ducting of radar pulses on closed field lines, in an analogous fashion to inter-hemispheric ducting in the Earth's ionosphere.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
The component structure of dense random subgraphs of the hypercube
Authors:
Colin McDiarmid,
Alex Scott,
Paul Withers
Abstract:
Given $p \in (0,1)$, we let $Q_p= Q_p^d$ be the random subgraph of the $d$-dimensional hypercube $Q^d$ where edges are present independently with probability $p$. It is well known that, as $d \rightarrow \infty$, if $p>\frac12$ then with high probability $Q_p$ is connected; and if $p<\frac12$ then with high probability $Q_p$ consists of one giant component together with many smaller components whi…
▽ More
Given $p \in (0,1)$, we let $Q_p= Q_p^d$ be the random subgraph of the $d$-dimensional hypercube $Q^d$ where edges are present independently with probability $p$. It is well known that, as $d \rightarrow \infty$, if $p>\frac12$ then with high probability $Q_p$ is connected; and if $p<\frac12$ then with high probability $Q_p$ consists of one giant component together with many smaller components which form the `fragment'. Here we fix $p \in (0,\frac12)$, and investigate the fragment, and how it sits inside the hypercube. In particular we give asymptotic estimates for the mean numbers of components in the fragment of each size, and describe their asymptotic distributions and indeed their joint distribution, much extending earlier work of Weber.
△ Less
Submitted 4 January, 2021; v1 submitted 17 June, 2018;
originally announced June 2018.
-
Occultations of astrophysical radio sources as probes of planetary environments: A case study of Jupiter and possible applications to exoplanets
Authors:
Paul Withers,
Marissa F. Vogt
Abstract:
Properties of planetary atmospheres, ionospheres, and magnetospheres are difficult to measure from Earth. Radio occultations are a common method for measuring these properties, but they traditionally rely on radio transmissions from a spacecraft near the planet. Here we explore whether occultations of radio emissions from a distant astrophysical radio source can be used to measure magnetic field s…
▽ More
Properties of planetary atmospheres, ionospheres, and magnetospheres are difficult to measure from Earth. Radio occultations are a common method for measuring these properties, but they traditionally rely on radio transmissions from a spacecraft near the planet. Here we explore whether occultations of radio emissions from a distant astrophysical radio source can be used to measure magnetic field strength, plasma density, and neutral density around planets. In a theoretical case study of Jupiter, we find that significant changes in polarization angle due to Faraday rotation occur for radio signals that pass within 10 Jupiter radii of the planet and that significant changes in frequency and power occur from radio signals that pass through the neutral atmosphere. There are sufficient candidate radio sources, such as pulsars, active galactic nuclei, and masers, that occultations are likely to occur at least once per year. For pulsars, time delays in the arrival of their emitted pulses can be used to measure plasma density. Exoplanets, whose physical properties are very challenging to observe, may also occult distant astrophysical radio sources, such as their parent stars.
△ Less
Submitted 22 February, 2017;
originally announced February 2017.
-
Radio occultations of the Io plasma torus by Juno are feasible
Authors:
Phillip H. Phipps,
Paul Withers
Abstract:
The flow of material from Io's volcanoes into the Io plasma torus, out into the magnetosphere, and along field lines into Jupiter's upper atmosphere is not adequately understood. The lack of observations of spatial and temporal variations in the Io plasma torus impedes attempts to understand the system as a whole. Here we propose that radio occultations of the Io plasma torus by the Juno spacecraf…
▽ More
The flow of material from Io's volcanoes into the Io plasma torus, out into the magnetosphere, and along field lines into Jupiter's upper atmosphere is not adequately understood. The lack of observations of spatial and temporal variations in the Io plasma torus impedes attempts to understand the system as a whole. Here we propose that radio occultations of the Io plasma torus by the Juno spacecraft can measure plasma densities in the Io plasma torus. We find that the line-of-sight column density of plasma in each of the three regions of the Io plasma torus (cold torus, ribbon, and warm torus) can be measured with uncertainties of 10%. We also find that scale heights describing the spatial variation in plasma density in each of these three regions can be measured with similar uncertainties. Such observations will be sufficiently accurate to support system-scale studies of the flow of plasma through the magnetosphere of Jupiter.
△ Less
Submitted 27 January, 2017; v1 submitted 25 January, 2017;
originally announced January 2017.
-
Direct high-order edge-preserving regularization for tomographic image reconstruction
Authors:
Daniil Kazantsev,
Evgueni Ovtchinnikov,
William R. B. Lionheart,
Philip J. Withers,
Peter D. Lee
Abstract:
In this paper we present a new two-level iterative algorithm for tomographic image reconstruction. The algorithm uses a regularization technique, which we call edge-preserving Laplacian, that preserves sharp edges between objects while damping spurious oscillations in the areas where the reconstructed image is smooth. Our numerical simulations demonstrate that the proposed method outperforms total…
▽ More
In this paper we present a new two-level iterative algorithm for tomographic image reconstruction. The algorithm uses a regularization technique, which we call edge-preserving Laplacian, that preserves sharp edges between objects while damping spurious oscillations in the areas where the reconstructed image is smooth. Our numerical simulations demonstrate that the proposed method outperforms total variation (TV) regularization and it is competitive with the combined TV-L2 penalty. Obtained reconstructed images show increased signal-to-noise ratio and visually appealing structural features. Computer implementation and parameter control of the proposed technique is straightforward, which increases the feasibility of it across many tomographic applications. In this paper, we applied our method to the under-sampled computed tomography (CT) projection data and also considered a case of reconstruction in emission tomography The MATLAB code is provided to support obtained results.
△ Less
Submitted 15 September, 2015;
originally announced September 2015.
-
Uniform multicommodity flow in the hypercube with random edge capacities
Authors:
Colin McDiarmid,
Alex Scott,
Paul Withers
Abstract:
We give two results for multicommodity flows in the $d$-dimensional hypercube ${Q}^d$ with independent random edge capacities distributed like $C$ where $\Pr[C>0]>1/2$. Firstly, with high probability as $d \rightarrow \infty$, the network can support simultaneous multicommodity flows of volume close to $E[C]$ between all antipodal vertex pairs. Secondly, with high probability, the network can supp…
▽ More
We give two results for multicommodity flows in the $d$-dimensional hypercube ${Q}^d$ with independent random edge capacities distributed like $C$ where $\Pr[C>0]>1/2$. Firstly, with high probability as $d \rightarrow \infty$, the network can support simultaneous multicommodity flows of volume close to $E[C]$ between all antipodal vertex pairs. Secondly, with high probability, the network can support simultaneous multicommodity flows of volume close to $2^{1-d} E[C]$ between all vertex pairs. Both results are best possible.
△ Less
Submitted 31 March, 2016; v1 submitted 17 June, 2014;
originally announced June 2014.
-
Using Satellites to Probe Extrasolar Planet Formation
Authors:
Paul Withers,
Jason W. Barnes
Abstract:
Planetary satellites are an integral part of the heirarchy of planetary systems. Here we make two predictions concerning their formation. First, primordial satellites, which have an array of distinguishing characteristics, form only around giant planets. If true, the size and duration of a planetary system's protostellar nebula, as well as the location of its snow line, can be constrained by knowi…
▽ More
Planetary satellites are an integral part of the heirarchy of planetary systems. Here we make two predictions concerning their formation. First, primordial satellites, which have an array of distinguishing characteristics, form only around giant planets. If true, the size and duration of a planetary system's protostellar nebula, as well as the location of its snow line, can be constrained by knowing which of its planets possess primordial satellites and which do not. Second, all satellites around terrestrial planets form by impacts. If true, this greatly enhances the constraints that can be placed on the history of terrestrial planets by their satellites' compositions, sizes, and dynamics.
△ Less
Submitted 4 April, 2012;
originally announced April 2012.
